Having compared the debug output, it doesn’t show anything unusual
happening that can’t already be seen from other output, for this test.
This is a partial revert of 8fd71dccc5. The debugging output it added to
other tests may still be useful.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1929
The retry loop for acquiring the lock for the authentication cookie file
currently tries to acquire the lock for 0.5s, then gives up, assumes the
lock file is stale, and deletes it.
That’s great if the lock file *is* stale because it’s been left there by
a crashed process.
It’s not so great if the lock file just happens to have been there every
time this process checked, because the cookie file is highly contested
while (for example) running lots of parallel unit tests.
Check for that situation by comparing the mtime of the lock file and
continuing to retry if it’s changed.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1929
Rather than tracking them with a counter. This should close the race in
tracking the finalisation of the tasks by the task worker thread.
There’s no way to synchronise with that thread as it’s internal to
`g_task_run_in_thread()`.
This should hopefully stop the `debugcontroller` test being flaky.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2486#note_1384102
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
We are matching `<parameter>` as well as `<para>`, and we
end up with broken XML in case the (expanded) description
starts with `<parameter>`.
Fixes: #2601
This allows the controller to explicitly be removed from the bus, in a
way that allows the caller to synchronise with it and know that all
other references to the controller should have been dropped (i.e. after
this method returns, there should be no in-flight D-Bus calls still
holding a reference to the object).
This is needed to be able to guarantee finalisation of the controller in
unit tests (and comparable real-world situations).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
The resources data is generated for both GCC and MSVC toolchains, even
though we know beforehand which toolchain we're going to compile it for.
By dropping the data duplication we make the generated resources file
faster to compile, especially when dealing with large embedded data,
instead of relying on the C pre-processor to walk the whole file and
discard the branch we're not using.
There shouldn’t be any issues here with empty argv arrays since an empty
`Exec=` line is already checked for. Encode that explicitly with an
assertion.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This won’t really affect anything, but we might as well fix them to not
crash if called with an empty `argv` by someone (ab)using `execve()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
While it’s not usual, it is possible for applications to be called with
an empty `argv` by a process (ab)using `execve()`. Modify the
`GApplication` code example to handle that possibility, so that anyone
copying the example isn’t introducing a bug into their program
immediately.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If `GDebugControllerDBus` remains as the only, or default,
implementation of `GDebugController`, `dup_default()` cannot work.
`GDebugControllerDBus` requires a `GDBusConnection` at construction
time, which the `GIOModule` construction code can’t provide it.
Either we use a default D-Bus connection (but which one? and how would
it be changed by the user later if it was the wrong one?), or delegate
singleton handling of the `GDebugController` to the user.
The latter approach seems more flexible.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
On Windows, dbus is launched by spawning the gdbus.exe executable on
demand from the gio module. When linked dynamically, the executable
path is guessed relatively to the gio DLL path. But when linked
statically, the only reference path available is the current
executable path. In this case, gdbus.exe is not necessarily in the same
folder as the current executable.
This patch solves the issue using the same algorithm as the one used
with process spawning in glib core source code two commits above.
This is intended to provide a uniform interface for controlling whether
the debug output from an application (or service) is emitted, typically
to journald, but actually to wherever the application chooses to output
it.
The main implementation of `GDebugController` is `GDebugControllerDBus`,
which is intended to be used on Linux. Other implementations may be
added in future for other platforms, or larger applications may want to
provide their own implementation which integrates with their ecosystem.
The `GDebugControllerDBus` implementation exposes a D-Bus interface at
`/org/gtk/Debugging` with a method to enable or disable debug
output at runtime.
This could be used by external harnesses, such as GNOME Builder or
systemd, to give a uniform way to get debug output from an application.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1190
As with the previous commit, this isn’t needed for GLib’s tests to work
correctly, but is probably needed in other projects which might be
tempted to copy and paste the Meson tooling from GLib.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4330
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This isn’t needed to make the tests any better (it doesn’t really affect
them), but is probably needed for anyone who copies this Meson code in
order to add `glib-compile-resources` support to their project. It’s
pretty unlikely that someone would want to compile *and export* a
resource from a shared library.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4334
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Credentials are often used to check peer processes details.
With AF_UNIX sockets on Windows, SIO_AF_UNIX_GETPEERPID can
be used to retrive the peer PID.
We will probably introduce more advanced mechanisms later on, though,
but I am not a Windows API expert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
On !UNIX, return an error for send_fd() & receive_fd().
(the unixfdmessage unit is not compiled on !UNIX)
The header is installed under the common GIO include directory.
Ensure G_TYPE_UNIX_CONNECTION is registered on all platforms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The header is now also installed under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move the header under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
They are not allowed in the specification, and can lead to infinite
loops when parsing.
That’s a security issue if your application is accepting D-Bus messages
from untrusted peers (perhaps in a peer-to-peer connection). It’s not
exploitable when your application is connected to a bus (such as the
system or session buses), as the bus daemons (dbus-daemon or
dbus-broker) filter out such broken messages and don’t forward them.
Arrays of zero-length elements are disallowed in the D-Bus
specification: https://dbus.freedesktop.org/doc/dbus-specification.html#container-types
oss-fuzz#41428, #41435Fixes: #2557
Glib cannot be built statically on Windows because glib, gobject and gio
modules need to perform specific initialization when DLL are loaded and
cleanup when unloaded. Those initializations and cleanups are performed
using the DllMain function which is not called with static builds.
Issue is known for a while and solutions were already proposed but never
merged (see: https://gitlab.gnome.org/GNOME/glib/-/issues/692). Last
patch is from version 2.36.x and since then the
"constructor/destructor" mechanism has been implemented and used in
other part of the system.
This patch takes back the old idea and updates it to the last version of
glib to allow static compilation on Windows.
WARNING: because DllMain doesn't exist anymore in static compilation
mode, there is no easy way of knowing when a Windows thread finishes.
This patch implements a workaround for glib threads created by calling
g_thread_new(), so all glib threads created through glib API will behave
exactly the same way in static and dynamic compilation modes.
Unfortunately, Windows threads created by using CreateThread() or
_beginthread/ex() will not work with glib TLS functions. If users need
absolutely to use a thread NOT created with glib API under Windows and
in static compilation mode, they should not use glib functions within
their thread or they may encounter memory leaks when the thread finishes.
This should not be an issue as users should use exclusively the glib API
to manipulate threads in order to be cross-platform compatible and this
would be very unlikely and cumbersome that they may mix up Windows native
threads API with glib one.
Closes#692
The gdbus-codegen tool generates documentation from the XML introspection
description of a D-Bus interface. Currently, only DocBook is supported at
the moment, but not every modern documentation generator can handle that
format. The reStructuredText format is a bit more well-supported,
especially in documentation generators for non-C languages.
Unlike DocBook, we get to make our own structure and conventions for how
we structure the documentation when using reStructuredText.
When parsing a comment we're adding <para> elements ourselves, but the
DocBook generator already wraps any block of text that does not start
with a <para> element with one.
xucred does not provide the peer pid id, but this can be fetched
from the socket LOCAL_PEERPID option. Note that we only support
it when creating the credentials from a local socket, if
the credential comes from a message over a socket the peer
pid id will not be set and -1 will be returned when trying
to get the pid for the credential.
D-Bus reference implementation doesn't require more than the claimed
process SID as part of the AUTH initial data for EXTERNAL.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The code is based from #1351 patch and existing similar code in
gdbusprivate.c. The next commit will replace that existing code with
those helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This commit puts an additional underscore before the external symbol
`_g_binary_test1_resource_data` when using gcc for Windows, to match
the compiler's expectation.
Fixes#2571
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Using ld_flags would work, but that does not propagate ldflags to users
of glib. Meson's dependency() call will propagate apple framework
dependencies to downstream users.
Not everything should be an int. This code is quite dated. We now try to
use `guint8*` to represent arbitrary binary data, rather than `guchar*`
(which makes it sound like some form of string).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
While it’s not a supported public part of the API, exporting this
symbol from the library means we can easily test the DNS record parser,
which is important to do since it handles untrusted data from the
network.
This tests for #2503. It's fragile, but there is no non-fragile way to
test this. If the test breaks in the future, it will pass without
successfully testing the bug, not fail spuriously, so I think this is
OK.
We should run test_pass_fd twice, once using gspawn's fork/exec codepath
and once attempting to use its posix_spawn() codepath. There's no
guarantee we'll actually get the posix_spawn() codepath, but it works
for now on Linux.
For good measure, run it a third time with no flags at all.
This causes the test to fail if I separately break the fd remapping
implementation. Without this, we fail to test fd remapping on the
posix_spawn() codepath.
Specs say that on Unix id should be desktop file id from the xdg menu
specification, however, currently code just uses basename of .desktop file.
Fix that by finding the .desktop file in all the desktop_file_dirs and use
basename only as a fallback.
See https://specifications.freedesktop.org/menu-spec/latest/go01.html#term-desktop-file-id
and https://specifications.freedesktop.org/desktop-entry-spec/latest/ar01s02.html#desktop-file-id
"To determine the ID of a desktop file, make its full path relative to the
$XDG_DATA_DIRS component in which the desktop file is installed, remove the
"applications/" prefix, and turn '/' into '-'."
Also, add unit test that verifies Desktop Id is being correctly set
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
This is sad, but GResolver has one member variable for historical
reasons, to implement the reload signal. Since it offers a global
singleton, we should make sure it's really safe to use from multiple
threads at once.
This call was needed once upon a time, when GResolver had subclasses
that presumably relied on this. Nowadays, we have only
GThreadedResolver, which does not need it. res_init() is dangerous
because it modifies global state, so let's get rid of it.
meson in git master now warns about a missing `check:` kwarg, and may
eventually change the default from false to true.
Take the opportunity to require `objcopy --help` to succeed -- it is
unlikely to fail, but if it does something insane happened.
We used to use a pipe for the dbus daemon stdout to read the defined
address, but that was already requiring a workaround to ensure that dbus
daemon children were then able to write to stdout.
However the current implementation is still causing troubles in some
cases in which the daemon is very verbose, leading to hangs when writing
to stdout.
As per this, just don't handle stdout ourself, but use instead a
specific pipe to get the address address. That can now be safely closed
once we've received the data we need.
This reverts commit d80adeaa96.
Fixes: #2537
The code in `g_dbus_message_new_from_blob()` has now been fixed to
correctly error out on all truncated messages, so there’s no need for an
arbitrary programmer error if the input is too short to contain a valid
D-Bus message header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2528
Perform strict bounds checking when reading data from the D-Bus message,
and propagate errors to the callers.
Previously, truncated D-Bus messages could cause out-of-bounds reads.
This is a security issue, but one which is only exploitable when
communicating with an untrusted peer (who might send malicious
messages). Almost all D-Bus traffic is with a session or system bus,
where the dbus-daemon or dbus-broker is trusted, and is known to have
already rejected malformed (malicious) messages.
Accordingly, this is only exploitable with peer-to-peer D-Bus
conversations with an untrusted peer.
(Includes some minor cleanups from Philip Withnall.)
oss-fuzz#17408
Fixes: #2528
Since
https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/173,
there is now a really surprising implication to using a non-default
GTlsDatabase: your database could do nothing at all other than wrap the
default database, which you would expect to result in no behavior
changes, but in fact it causes fewer security checks to be performed
during certificate verification. This is because certificate
verification moved from GTlsDatabase to GTlsConnection, allowing for
more security checks to be performed. But if using a non-default
GTlsDatabase, we have to fall back to letting GTlsDatabase to the
verification, as before.
This is the best we can do. It's not a regression for applications,
because it means applications get the previous pre-2.72 behavior. But it
does mean that new security checks added in 2.72 are not applied, which
is unfortunate, so we should warn developers about this.
This feature has been reverted for now because I messed up the
implementation and it was doing sync I/O during async API calls. Oops!
Since it's not present in 2.70 nor in 2.72, let's remove the reference
to the exact GLib version that this behavior was introduced in. I'd like
to get it working properly for 2.74, but it's not ready yet and just
changing the version to 2.74 feels optimistic.
Rather than waiting for a fixed period of time, poll in a loop until the
condition the test is expecting is true.
A better solution would be to use a `GSource` and wait until that’s
dispatched. But doing so might affect the behaviour of the
`GInputStream` under test, so busy-wait instead.
Fixes this CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/1630758
```
(some socket debug output)
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1037:test_converter_pollable: assertion failed (res == -1): (1 == -1)
```
I could not reproduce the failure remotely with a few hundred
invocations of the test, so it might only present itself on BSD, which
presumably has different socket timing behaviour from Linux.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/gio-du.c: In function 'main':
gio/tests/gio-du.c:74:11: error: parameter 'argc' set but not used
74 | main (int argc, char **argv)
| ~~~~^~~~
gio/ginputstream.c: In function 'g_input_stream_real_skip':
gio/ginputstream.c:433:31: error: comparison of integer expressions of different signedness: 'goffset' {aka 'long long int'} and 'long long unsigned int'
433 | (start + count) > (guint64) end)
| ^
gio/gwin32appinfo.c: In function 'uwp_package_cb':
gio/gwin32appinfo.c:3383:17: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < supported_extgroups->len; i++)
^
gio/gwin32appinfo.c:3389:29: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_ext = 0; i_ext < grp->extensions->len; i_ext++)
^
gio/gwin32appinfo.c:3430:35: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_verb = 0; i_verb < grp->verbs->len; i_verb++)
^
gio/gwin32appinfo.c:3463:33: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_hverb = 0; i_hverb < ext->verbs->len; i_hverb++)
^
gio/gwin32appinfo.c:3478:17: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < supported_protocols->len; i++)
^
gio/gwin32appinfo.c:3541:33: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_hverb = 0; i_hverb < url->verbs->len; i_hverb++)
^
gio/gwin32appinfo.c: In function 'g_win32_app_info_launch_internal':
gio/gwin32appinfo.c:4799:37: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (p_index = 0; p_index <= g_strv_length (envp); p_index++)
^~
gio/gwin32packageparser.c: In function 'WIN32_FROM_HRESULT':
gio/gwin32packageparser.c:99:30: warning: comparison of integer expressions of different signedness: 'long unsigned int' and 'long int'
if ((hresult & 0xFFFF0000) == MAKE_HRESULT (SEVERITY_ERROR, FACILITY_WIN32, 0) ||
^~
This was previously done (by commit 63038d1e4c) in one of the cases
where `kill_test_service()` was called — but not the other.
This meant that one instance of `gdbus-testserver` could still be
around when (as it happens, due to the order of the tests) the
`/gdbus/proxy/no-match-rule` test was run. It would start a second
instance of `gdbus-testserver`, which would exit early due to the test
name still being owned on the bus. The first (killed) instance of
`gdbus-testserver` would then exit, leaving no test servers running, and
hence the new test would fail.
This was being seen as frequent CI failures, particularly on FreeBSD
(must have slightly different timing for process signalling and
termination from Linux).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Once upon a time, we tried to return all possible certificate errors,
but it never actually worked reliably and nowadays we have given up.
This needs to be documented because a reasonable developer would not
expect it.
Because mistakes could be security-critical, I decided to copy the same
warning in several different places rather than relying only on
cross-referencese.
These are known leaks, as they were being done in tests which were
checking precondition failures.
However, since we know what happens when the failures occur, we can
still free the input data reliably, so do that.
This improves the valgrind output for `actions` to show zero definite
leaks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `actions` test previously waited an arbitrary 100ms for various
D-Bus messages to be sent/received, before checking the results of those
messages.
Normally, this would work, but on heavily loaded CI systems, it would
sometimes fail. For example,
https://gitlab.gnome.org/GNOME/glib/-/jobs/1611701.
Fix that by waiting for the condition being checked to evaluate to true,
rather than waiting an arbitrary period of time. On faster machines,
this will speed the tests up too.
Assume that the global default `GMainContext` is in use, so a
`GMainContext*` pointer doesn’t have to be passed around.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/gcontenttype-win32.c: In function 'get_registry_classes_key':
gio/gcontenttype-win32.c:66:78: warning: comparison of integer expressions of different signedness: 'DWORD' {aka 'long unsigned int'} and 'int'
if (ExpandEnvironmentStringsW (wc_temp, wc_temp_expanded, len) == len)
^~
This allows the flag to allow interactive auth to be set. Previously, it
was unconditionally unset.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
D-Bus has an upper limit on number of Match rules and it's rather easy to hit
with a big number of proxies with signal subscriptions. This happens with
NetworkManager with hundreds of devices or connection settings. By passing
G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE to g_dbus_connection_signal_subscribe(), the
user can call AddMatch with a less granular match instead of a match per every
proxy.
Tests subsequently added by Philip Withnall.
Fixes: #1109
- Isolate the first meaningful paragraph, for gi-docgen's summary
- Describe get_object() as a binding API
- Fix reference to get_item() inside get_item_type()
g_check_setuid does more than setuid checks when using AT_SECURE.
Make sure that it is referenced in the error message to help
users debug in case or errors
Closes#2518
Fix another variant of the previous commit, this time specific to the
idle callback of a method call on a subtree object, racing with
unregistration of that subtree.
In this case, the `process_subtree_vtable_message_in_idle_cb()` idle
callback already has a pointer to the right `ExportedSubtree` struct,
but again doesn’t have a strong reference to it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
If `g_dbus_connection_unregister_object()` (or `unregister_subtree()`)
was called from one thread, while an idle callback for a method call (or
a property get or set) was being invoked in another, it was possible for
the two to race after the idle callback had checked that the
object/subtree was registered, but before it had finished dereferencing
all the data related to that object/subtree.
Unregistering the object/subtree would immediately free the data,
leading the idle callback to cause a use-after-free error.
Fix that by giving the idle callback a strong reference to the data from
inside the locked section where it checks whether the object/subtree is
still registered.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2400
This is needed for an upcoming change which decouples their lifecycle
from their presence in the `map_id_to_ei` and `map_id_to_es` hash
tables.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
Move it further up the file, but make no changes to it. This will help
with a subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
This introduces no functional changes; it only simplifies the code.
Instead of maintaining a separate pointer to the backend iff it’s a
`GDelayedSettingsBackend`, just test the `backend` pointer’s type.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2426
Previously, the delay-apply status of the parent `GSettings` object
would be partially inherited: `settings->priv->backend` in the child
`GSettings` object would point to a `GDelayedSettingsBackend`, but
`settings->priv->delayed` would be `NULL`.
The expectation from https://bugzilla.gnome.org/show_bug.cgi?id=720891
was that `get_child()` would fully inherit delay-apply status.
So, ensure that `settings->priv->delayed` is correctly set to point to
the delayed backend when constructing any `GSettings`. Update the tests
to work again (presumably the inverted test was an oversight in the
original changes).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
`g_settings_reset()` changes the value of the setting to `NULL`;
`add_to_tree()` was not handling that correctly.
Add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
Add missing (nullable), and use 2-space indentation to avoid markdown
pre-formatted blocks when unwanted.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As this would have undesirable consequence.
Quoting Philip Withnall:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2305#note_1294729:
The documentation never said anything about accepting absolute paths,
so any code which is relying on that is relying on undocumented
behaviour. We’re allowed to change that.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
`standard::name` must be available for `g_file_enumerator_get_child()`
to work. Emit a critical warning and return if it’s not. This is similar
to the existing behaviour in `g_file_enumerator_iterate()`.
Improve the documentation to mention this.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2507
The code cannot function correctly if the `standard::name` attribute is
not present, so upgrade the existing warning to a critical warning and
return if it fails in `g_file_enumerator_iterate()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2507
It was Red Hat specific when it was introduced in 2004, was never
supported by mount(8) upstream, and was removed entirely in 2008.
It’s confusing for GLib to keep references to it around.
Thanks to Karel Zak for digging up the history of it:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2298#note_1294519
And thanks to Xidorn Quan for looking into it in the first place (see
!2298).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/gsocket.c: In function 'g_socket_get_available_bytes':
gio/gsocket.c:3141:17: warning: comparison of integer expressions of different signedness: 'u_long' {aka 'long unsigned int'} and 'int'
if (avail == -1)
^~
gio/gsocket.c: In function 'g_socket_send_messages_with_timeout':
gio/gsocket.c:5283:19: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < num_messages; ++i)
^
gio/gsocket.c:5308:76: warning: operand of ?: changes signedness from 'int' to 'gsize' {aka 'long long unsigned int'} due to unsignedness of other operand
result = pollable_result == G_POLLABLE_RETURN_OK ? bytes_written : -1;
^~
gio/win32/gwinhttpfile.c: In function 'g_winhttp_file_query_info':
gio/win32/gwinhttpfile.c:554:13: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long long unsigned int'}
n == wcslen (content_length))
^~
gio/win32/gwin32fsmonitorutils.c: In function 'g_win32_fs_monitor_handle_event':
gio/win32/gwin32fsmonitorutils.c:107:11: warning: comparison of integer expressions of different signedness: 'GFileMonitorEvent' {aka 'enum <anonymous>'} and 'int'
if (fme != -1)
^~
gio/win32/gwinhttpvfs.c: In function 'g_winhttp_vfs_get_file_for_uri':
gio/win32/gwinhttpvfs.c:172:17: warning: comparison of integer expressions of different signedness: 'int' and 'long long unsigned int'
for (i = 0; i < G_N_ELEMENTS (winhttp_uri_schemes); i++)
^
gio/win32/gwinhttpvfs.c: In function 'g_winhttp_vfs_get_supported_uri_schemes':
gio/win32/gwinhttpvfs.c:210:17: warning: comparison of integer expressions of different signedness: 'int' and 'long long unsigned int'
for (i = 0; i < G_N_ELEMENTS (winhttp_uri_schemes); i++)
^
The "recursive:" kwarg is available in the targeted minimum version of
meson, and is basically required if you want to not emit warnings and
maybe error with --fatal-meson-warnings.
There are two basic solutions to this problem:
- The current default behavior is false, so explicitly opt in to that
value. None of these internal libraries use recursive objects anyway.
- Use link_with to link to the static library directly, rather than the
extracted objects.
Option 2 is what used to be done before commit
62af03bda8, but it only works with meson
>=0.52 and previously had buggy behavior.
Since the minimum version of meson is now 0.52, it is safe to revert
that commit and go back to using link_with, and therefore option 2 is
chosen.
Previously, the code validated that child objects have a path with the
object manager strictly as a prefix. That doesn’t work in the case where
the object manager’s path is `/`. This case is not recommended, but is
supported.
If the object manager’s path is `/`, validate that child objects’ paths
are not equal to it. If they are equal to it, warn the user rather than
emitting a critical warning, since we can’t expect any users who’ve not
been compliant with the spec to instantly rework their D-Bus APIs.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2500
Emit this when we're about to spawn or DBus activate a GAppInfo. This
allows lauchers to keep the appinfo associated with a startup id.
We use a GVariant to allow for future exansion of the supplied data.
When using g_desktop_app_info_launch_uris_as_manager the "launched"
signal allows to map a desktop-startup-id to a GAppInfo. Make this
possible for DBus activation too.
Since we don't have a PID there we pass a 0. Update the signal
description accordingly.
These should be implemented by loadable IO module libraries, but are not
callable in GLib itself.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2498
This is a partial revert of commit
f378352051, as the previous commits have
silenced the AddressSanitizer warnings for `GContentType`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2310
The function pointer casts silence the compiler and allow the code to
build (and even run in the typical case). However, when building with
control flow integrity checks, the runtime (rightfully) complains about
calling a function via a mismatched function pointer type.
In order to make xdgmime properly relocatable so that unit tests can use
it without it reading and modifying the user’s actual xdgmime files, and
without the need to call setenv() (and get tied up with thread safety
problems), add a xdg_mime_set_dirs() method to allow the dirs to be
overridden. They will still default to the values of $XDG_DATA_HOME and
$XDG_DATA_DIRS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Allocate an empty cache object, check cache objects for being empty
before using them.
Otherwise the code will re-read cache every 5 seconds, as NULL cache
does not trigger the code that stores mtime, which makes the cache
file appear modified/unloaded permanently.
https://bugzilla.gnome.org/show_bug.cgi?id=735696
Since returning exactly one match has special significance, don't
give up matching before we've found at least 2 types. Also, make
sure that we don't return the same mime type more than once.
Bug 541236.
If an `InterfacesRemoved` signal is received for an object which doesn’t
exist in the local map of interfaces, don’t emit a warning.
This seems to happen in the real world (see #2401). Without a trace of
the D-Bus traffic it’s not possible to know exactly what situation is
causing this, but it seems possible that the peer could disappear and
its `notify::name-owner` signal could be processed before its
`InterfacesRemoved` signal, or something similar.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2401
Relax assertion about opened registry key as it may have been removed
in the meantime between enumeration and when opening, or (more likely)
we may not have the required permissions to open the some enumerated
keys (i.e. RegOpenKeyExW fails and returns ERROR_ACCESS_DENIED).
Fixes https://gitlab.com/inkscape/inbox/-/issues/5669
Instead of calling xterm when it clearly does not exist and causes a silent error,
inform the user that the launch failed so they can take the right action.
Also added (transfer full) or (transfer none) annotations while I was at it.
This is the result of checking each `Returns:` line in these files. I’ve
only considered nullability and transferability, and not other (potentially
missing or incorrect) annotations.
Helps: #2227
If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
