There are some corner cases where using the sync version of read/write
in a thread could cause thread-safety issues. In these cases it's
possible to override the output stream's splice_async() function,
but for input streams one would need to do some acrobatics to
stay thread-safe. Alternatively, some implementations may not even
override their sync read/write functions.
This patch refactors the default splice_async() implementation to
call the sync read and write functions in a thread only when both
async versions are thread-based. When one or both are non-threaded,
it calls the virtual write_async() and read_async() functions of the
involved streams within the same thread.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Refactor g_output_stream_close_async() into itself and an internal
variant for potential use inside other operations (splice_async).
The internal version must be called between
g_output_stream_set_pending() and g_output_stream_clear_pending().
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Previously, no testcases tested the close flags of
g_output_stream_splice_async. This patch adds tests for that and
also tests various combinations of threaded and non-threaded
GInputStream async reads and GOutputStream async writes.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the output stream's
write function internally uses threads. If it and the input stream's
read async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an output stream's
g_output_stream_write_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
In implementing a better g_output_stream_splice_async() and possibly
other situtations it's helpful to know whether the input stream's
read function internally uses threads. If it and the output stream's
write async functions use threads, then the splice function could
spawn a single thread for better efficiency.
This patch adds a function to determine whether an input stream's
g_input_stream_read_async() function internally uses threads.
https://bugzilla.gnome.org/show_bug.cgi?id=691581
Rather than always calling out to g_file_get_path() (which
might block, whatever the documentation might say), postpone
the call until we actually need it.
https://bugzilla.gnome.org/show_bug.cgi?id=708753
g_cancellable_disconnect will wait until any pending "cancelled"
handlers finish. This is useful because disconnecting a handler can have the
side-effect of freeing data that the cancelled handler may rely on.
Unfortunately, the code used to enforce this synchronization between
"cancelled" handlers and g_cancellable_disconnect will also cause
deadlock if the cancelled handler itself calls g_cancellable_disconect.
Obviously, if g_cancellable_disconnect is explicitly called by a "cancelled"
handler, then the "cancelled" handler is shouldering the responsibility
of not using any data that may be freed by disconnection.
Also, g_cancellable_disconnect can be called in unexpected places by
lower layers in the code (for instance as a result of g_source_destroy).
In practice, this means it's easy for deadlocks to inadvertently crop
up when using "cancelled" handlers.
For these reasons, it would be good to fix the deadlock.
This commit prevents the deadlock by allowing foregoing synchronization,
if a pending "cancelled" handler is in the same thread as the
g_cancellabale_disconnnect call.
https://bugzilla.gnome.org/show_bug.cgi?id=705395
In the real_..._async wrapper for GFile.measure_disk_usage, skip the
wrapping of the progress callback in the case that the user gave a NULL
callback to the async function. This is a performance improvement
because the sync version won't have to do continuous sampling of the
clock to issue a call to the wrapper which will then do nothing.
Unfortunately, I made this simplifying assumption when writing the
wrapper, but forgot to actually implement it when making the sync call.
As a result, the wrapper is still called, and invokes the NULL callback,
causing a segfault.
Make sure we pass NULL if the user's callback was NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Make use of __wgetmainargs() on Windows so that we can get wide char
versions of the argv's that are passed in when this test program is being
invoked. This is necessary as one might enter non-ASCII, such as
CJK characters filenames and/or directories to run the test program
against, so that we can process the name(s) and pass the proper
UTF-8-encoded name(s) of the files/directories that is being tested.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
It turns out that although dirent is available on mingw32 (where the
code was originally tested), it is not usable from MSVC.
Avoid portability problems by just using GDir.
Also, be careful about ensuring that we utf8-format filenames in our
error messages, and leave out the "file://" component since the strings
we're displaying are not URIs (and we don't want to make them URIs since
the extra escaping would reduce legibility).
Thanks to Chun-wei Fan <fanchunwei@src.gnome.org> for portions of this
patch and for reviews.
https://bugzilla.gnome.org/show_bug.cgi?id=707787
Virtaal installs a mime package for various .po-like file formats, one
of which has the extension .txt. This causes GLib to report ".txt"
files still as "text/plain" but no longer with complete certainty.
The result is that asserting !uncertain during the testsuite causes the
test to fail if Virtaal happens to be installed.
Remove this assertion.
On Windows and OS X, FIONREAD on a UDP socket gets the total number of
bytes available, not the number of bytes available in the next packet,
which is the more useful number (and how the function always behaved
on Linux).
On OS X, fix this by using SO_NREAD. On Windows, fix this by doing a
MSG_PEEK recv() into a giant buffer, since there is apparently no
other way to get the information.
https://bugzilla.gnome.org/show_bug.cgi?id=686786
The requested_conditions list access is not threadsafe. When passing
the socket ownership from a GSource callback to another thread, which
also creates a GSocketSource for the socket, it can happen that the
original GSocketSource is finalized at the same time as the new one
is created. This would cause inconsistencies in the requested_conditions
list and can cause assertions or completely undefined behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=705027
The RunDLL command call during get_session_address_dbus_launch() was
expecting _g_win32_run_session_bus@16 and g_win32_run_session_bus
on Win32 and Win64 respectively at least when GLib is compiled with MSVC,
not g_win32_run_session_bus@16, which caused annoying RunDLL error dialogue
boxes to show up during the use of GtkApplication (such as when running
gtk3-demo-application on Windows), prevented GtkApplication items from
being run for more than one time during the lifespan of the program,
and this also interfered with some GTK+ tests, causing them to fail.
Update accordingly to address the issue.
GNetworkAddress was allowing IPv6 scope ids in g_network_address_new()
/ g_network_address_parse(), but not in g_network_address_parse_uri().
Fix that.
Part of https://bugzilla.gnome.org/show_bug.cgi?id=669724
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
With UDP sockets, g_socket_bind() with allow_reuse=TRUE on Linux
behaved in a way that the documentation didn't suggest, and that
didn't match other OSes. (Specifically, it allowed binding multiple
multicast sockets to the same address.)
Since this behavior is useful, and since allow_reuse didn't have any
other meaning with UDP sockets, update the docs to reflect the Linux
behavior, and make it do the same thing on non-Linux.
https://bugzilla.gnome.org/show_bug.cgi?id=689245
Under C locale, open() in Python 3 sets the file encoding to ASCII.
As expat looks at encoding="..." in XML declaration, gdbus-codegen can
simply open the input file as binary and let expat decode the content.
https://bugzilla.gnome.org/show_bug.cgi?id=696633
When running a task in a thread, GTask may still be internally holding
a ref on the task in that thread even after the callback is called in
the original thread (depending on thread scheduling). Fix the test to
handle that by using a weak notify that signals a GCond, and wait for
that GCond from the main thread. (And add a corresponding check to
test_return_on_cancel().)
https://bugzilla.gnome.org/show_bug.cgi?id=705152
When an icon is requested as symbolic, our generic fallback algorithm
uses fullcolor icons when the specified icon name is not found, treating
the "-symbolic" suffix as another component of the icon name.
Change the algorithm to check beforehand if the icon is symbolic, remove
the suffix if so, and re-add it at the end for all the generated icon
names.
https://bugzilla.gnome.org/show_bug.cgi?id=680926
GFileMonitor takes great care to sample the thread-default main context
at the time that it is created in order that events can be dispatched to
the correct thread when they come in.
The inotify GFileMonitor implementation uses a global file descriptor
shared between all watches. It has to poll this file descriptor from
somewhere so it arbitrarily picks the default main context.
The problem with that is that the user might not be running it.
Let's use the GLib worker thread for this instead. It's guaranteed to
be running if you need it, and this is exactly the sort of problem it
was meant to solve.
https://bugzilla.gnome.org/show_bug.cgi?id=704873
The default GNOME 3.10 login process right now has gdm spawn a session
for the login screen, retaining the X server, but closing the session
bus. Right now in this scenario many GNOME components such as
gnome-settings-daemon attempt to "clean up" on shutdown by releasing
their owned names.
But they're shutting down because the session bus went away, so
releasing the name is pointless, and presently spews an error into the
journal.
This patch avoids that error spew, which helps system administrators
find *real* problems.
https://bugzilla.gnome.org/show_bug.cgi?id=704567
Add a missing Name entry, and add a terminal ; to the Actions
entry in org.gtk.test.dbusappinfo.desktop. desktop-file-validate
still contains about the DBusActivatable entry and about the
missing Exec entries. The former will go away when desktop-file-validate
gets updated for the latest spec revision.
Update GCancellableSource to call g_source_set_ready_time() when its
cancellable is cancelled, rather than manually checking the state of
the cancellable from prepare() and check().
This means that we now need to use g_cancellable_connect() rather than
g_signal_connect() at construction time, to avoid the connect/cancel
race condition. Likewise, use g_cancellable_disconnect() to avoid the
disconnect/cancel race condition when freeing the source. (In fact,
that was necessary in the earlier code as well, and might have
occasionally caused spurious criticals or worse.)
https://bugzilla.gnome.org/show_bug.cgi?id=701511
GPollableSource and GSocket's "broken" source never trigger on their
own, so with the changes to GSources in the last cycle, their check
and prepare functions are unnecessary (and undesired).
https://bugzilla.gnome.org/show_bug.cgi?id=701511
The unix input/output streams were using a gio-only source type that
was mostly identical to GUnixFDSource. Get rid of that source type
and just use GUnixFDSource instead.
https://bugzilla.gnome.org/show_bug.cgi?id=701511
For the glib-defined source types, and any source type that defines a
closure callback but not a closure marshal, use
g_cclosure_marshal_generic. And then remove all the other remaining
source closure marshals.
https://bugzilla.gnome.org/show_bug.cgi?id=701511
A counterpart for parsing of detailed actions into (name, target) pairs,
this new function prints them back.
We also add a new function to check for validity of action names. Only
valid action names are allowed when printing. Parsing accepts _some_
invalid names for backwards compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=704157
If the default route is via a device rather than a particular IP
address, then neither RTA_DST nor RTA_GATEWAY will be present in the
RTM_NEWROUTE message, and so GNetworkMonitorNetlink would ignore it,
and then think there was no default route. (This could happen with
certain kinds of VPNs, if they were set to route all traffic through
the VPN.)
Fix this by recognizing routes that specify RTA_OIF ("output
interface") instead of RTA_GATEWAY.
https://bugzilla.gnome.org/show_bug.cgi?id=701609
Add a fairly realistic testcase that ensures that GDesktopAppInfo with
DBusActivatable=true can successfully talk to GApplication for a variety
of purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=699259
A previous version of the patch had OnlyShowIn support for desktop file
actions. This was removed from the spec and the patch rewritten, but
this bit of documentation slipped through. Remove it.
For some time, the desktop file specification has supported "additional
application actions". This is intended to allow for additional methods
of starting an app, such as a mail client having a "Compose New Message"
action that brings up the compose window instead of the folder list.
This patch adds support for this with a relatively minimal API.
In the case that the application is a GApplication and DBusActivatable,
desktop actions are translated into GActions that have been added to the
application with g_action_map_add_action(). This more or less closes
the loop on being able to activate an application with an action
invocation (instead of 'activate').
https://bugzilla.gnome.org/show_bug.cgi?id=664444
Add a new type of GAction that represents the value of a property on an
object. As an example, this might be used on the "visible-child-name"
property of a GtkStack.
https://bugzilla.gnome.org/show_bug.cgi?id=703270
It's possible to get a org.freedesktop.Properties.GetAll call even if we
have no readable properties in the introspection, in which case we
should return the empty list in the usual way.
We should certainly _not_ be dispatching to the method call handler of
an interface which has no properties (since it will not be expecting
this).
Add a check to make sure that there is at least one readable property
before assuming that a NULL get_property handler implies that we want to
handle properties asynchronously.
Add a testcase that was failing before the change and works after it.
https://bugzilla.gnome.org/show_bug.cgi?id=703437
We don't use # or other forms of links in the section headings.
We also capitalize them and don't put a final period.
This commit corrects several headings to follow these rules.
As it turns out, we have examples of internal functions called
type_name_get_private() in the wild (especially among older libraries),
so we need to use a name for the per-instance private data getter
function that hopefully won't conflict with anything.
cd html && gtkdoc-mkhtml $mkhtml_options gio ../gio-docs.xml
../xml/gdbusconnection.xml:2063: parser error : Opening and ending tag mismatch: literal line 2062 and para
</para>
^
We do a bunch of new validity checks for return values in response to
calls on the D-Bus property API but we miss the 'goto out' in one case.
Add it.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
Add some type checking for the values returned from async property
handling calls, similar in spirit to the type checking we do for normal
method calls.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
The existing advice in the documentation to "simply" register the
"org.freedesktop.DBus.Properties" interface if you want to handle
properties asynchronously is pretty unreasonable. If you want to handle
this interface you have to deal with all properties for all interfaces
on the path, and you have to do all of the checking for yourself. You
also have to provide your own introspection data.
Introduce a new convention for dealing with properties asynchronously.
If the user provides NULL for their get_property() or set_property()
functions in the vtable and has properties registered then the
properties are sent to the method_call() handler. We get lucky here
that this function takes an "interface_name" parameter that we can set
to "org.freedesktop.DBus.Properties".
We also do the user the favour of setting the GDBusPropertyInfo on the
GDBusMethodInvocation for their convenience (for much the same reasons
as they might want the already-available GDBusMethodInfo).
Add a testcase as well as a bunch of documentation about this new
feature.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
Separate the code for validating a method call from the code for
actually scheduling it for dispatch.
This will allow property Get/Set/GetAll calls to be dispatched to the
method_call handler without duplicating a lot of code.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
We presently do a lot of checks on property sets (signature check,
correct interface, property exists, etc.) from the worker thread before
dispatching the call to the user's thread. The typecheck, however, is
saved until just before calling the user's vfunc, in their thread.
My best guess is that this was done to save having to unpack the value
from the tuple twice (since we don't unpack it until we're just about
the call the user).
This patch moves the check to the same place as all of the other checks.
The purpose of this change is to allow for sharing this check with the
(soon-to-be-introduced) case of handing property sets from
method_call().
This change has a minor side effect: error messages generated by sending
invalid values to property sets are no longer guaranteed to be correctly
ordered with respect to the void returns from successful property sets.
They will instead be correctly ordered with respect to the other error
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=698375
When parsing an address, we need to re-set "len" between IPv4 and
IPv6, since WSAStringToAddress() might set it to sizeof(struct sin_addr)
when trying to parse the string as IPv4, even if it fails. Also, we
need to make sure to not pass strings to WSAStringToAddress() that it
will accept but that we don't want it to.
When stringifying an address, we need to clear the sockaddr before
filling it in, so we don't accidentally end up with an unwanted
scope_id or the like.
https://bugzilla.gnome.org/show_bug.cgi?id=701401
Previously, g_file_copy() would (on Unix) create files with the
default mode of 644. For applications which might at user request
copy arbitrary private files such as ~/.ssh or /etc/shadow, a
world-readable copy would be temporarily exposed.
This patch is suboptimal in that it *only* fixes g_file_copy()
for the case where both source and destination are instances of
GLocalFile on Unix.
The reason for this is that the public GFile APIs for creating files
allow very limited control over the access permissions for the created
file; one can either say a file is "private" or not. Fixing
this by adding e.g. g_file_create_with_attributes() would make sense,
except this would entail 8 new API calls for all the variants of
_create(), _create_async(), _replace(), _replace_async(),
_create_readwrite(), _create_readwrite_async(), _replace_readwrite(),
_replace_readwrite_async(). That can be done as a separate patch
later.
https://bugzilla.gnome.org/show_bug.cgi?id=699959
Previously, we called g_file_query_info() *again* on the source at the
very end of the copy. This has the lame semantics that if the source
happened to be deleted, we would fail to apply attributes to the
destination. This could even be a security flaw.
This commit changes things so that we query info from the source
*stream* after opening - i.e. on Unix we use the proper fstat() and
friends. That way we operate more atomically.
https://bugzilla.gnome.org/show_bug.cgi?id=699959
The freedesktop application specification is largely overlapping the
GLib application D-Bus interface but implementing it will allow for
applications to be launched directly from desktop files, which we want.
We keep the old Gtk interface for compatibility reasons and because it
has some functionality not in the freedesktop spec (Busy state,
CommandLine, etc.).
https://bugzilla.gnome.org/show_bug.cgi?id=699259
Since services are based on D-Bus activation and desktop files are
supposed to be named like the busname for DBusActivatable applications
and since gnome-shell wants wmclass equal to the desktop file name, we
therefore want wmclass equal to the application ID in this case.
wmclass is determined from the prgname, which is otherwise pretty
pointless to set to some random thing in $(libexec) for a D-Bus service,
so set that to the appid.
This means that for D-Bus services, the following things are now all the
same:
- application ID
- prgname
- wmclass property set on all windows
- desktop file name
- well-known bus name
There are not many applications running as D-Bus services at present so
this shouldn't impact anybody except for gnome-clocks (where this change
will be fixing a bug) and gnome-terminal.
https://bugzilla.gnome.org/show_bug.cgi?id=699259
OS X's getaddrinfo() only supports IPv6 scope IDs that are interface
names, not numbers. So use if_indextoname() to get the name of an
interface and construct an address using that.
https://bugzilla.gnome.org/show_bug.cgi?id=700123
In the case that HAVE_DBUS_DAEMON was undefined (as in ostree where glib
is built before D-Bus) this test was failing. Move it inside the
HAVE_DBUS_DAEMON block.
Remove the complications that were introduced in an attempt to make the
gsettings and gschema-compile tests function as installed tests. These
tests are designed (in large part for gsettings and entirely for
gschema-compile) to test the in-tree tools and should not be testing the
system versions.
In the future we may want to move the use of the in-tree tools from the
gsettings testcase into the Makefile and install the resulting files,
allowing this testcase to run against those files, installed.
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
This should be the last users that need to be ported.
For some of the oldschool non-gtester-ified tests, we call g_test_init()
from main() because it is necessary in order to use
g_test_build_filename().
Since this feature is so utterly automake-centric, we may as well be
using the same terminology as automake itself (ie: although it's
BUILT_SOURCES, it's DIST_EXTRA, not DISTED).
Also add some comments to the enum explaining that these terms are
really corresponding directly to the automake terms.
https://bugzilla.gnome.org/show_bug.cgi?id=549783
Both g_[file|bytes]_icon_load() leave the `type' out parameter
untouched, while the async methods g_[file|bytes]_icon_load_finish()
always set it to NULL.
For consistency's sake NULLify it in the sync methods too.
https://bugzilla.gnome.org/show_bug.cgi?id=700725
While those strings ("Expecting 1 control message, got %d" and
"Expecting one fd, but got %d\n") have same singular/plural form
in english, it is not necessarily the case in other languages.
https://bugzilla.gnome.org/show_bug.cgi?id=695233
It's a recipe for race conditions and error; on some hardware
architectures one thread isn't guaranteed to see the results
of writes from another thread without a cache flush.
https://bugzilla.gnome.org/show_bug.cgi?id=700855
The test /gdbus/connection/large_message waits for a dbus name to appear.
The dbus name is created by a another process executed in the background.
If for some reason this fails, the test will likely wait forever.
This will avoid this situation by making the test fail if the dbus service
has not appeared after 10 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=698981
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
It tries to run glib-compile-schemas and glib-mkenums, which
we won't have in the runtime tree.
Anyways it's kind of a dumb test since the best test for
compilation tools is...compiling things, which we already
do frequently.
Although none of the in-tree GSocketConnectable types need it, other
types (like SoupAddress) may find it useful to be able to pass a URI
and a default-port to GProxyAddressEnumerator separately (the same way
you can with GNetworkAddress). So add a default-port property.
https://bugzilla.gnome.org/show_bug.cgi?id=698877
The GError should be initialized to NULL, otherwise we'll
"pile up" errors, then try to free an uninitialized pointer.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=699493
Not all systems have /usr/bin/true. Some have it in /bin/true.
Instead of trying to guess a hardcoded path to find it, let
g_app_info_create_from_commandline() internally search PATH
to find the program.
https://bugzilla.gnome.org/show_bug.cgi?id=698655
GUnixSocketAddress has some very strange logic for interpreting its
construct paramters. This logic behaves differently in these two cases:
g_object_new (G_TYPE_UNIX_SOCKET_ADDRESS,
"abstract", FALSE,
"address-type", ...,
NULL);
and
g_object_new (G_TYPE_UNIX_SOCKET_ADDRESS,
"address-type", ...,
NULL);
even though the default value for "abstract" is already FALSE.
Change the way the code works so that it is not sensitive to people
merely setting a property to its default value.
https://bugzilla.gnome.org/show_bug.cgi?id=698686
This function takes a GIcon, serialises it and sets the resulting
GVariant as the "icon" attribute on the menu item. We will need to add
a patch to Gtk to actually consume this icon.
Also add G_MENU_ATTRIBUTE_ICON.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Add support for serialising a GIcon to a GVariant and deserialising the
result back to a GIcon.
This solves a number of problems suffered by the existing to_string()
API, primarily these:
- not forcing the icon to be a utf8 string means that we can
efficiently encode a PNG (ie: just give the array of bytes)
- there is no need to ensure that proper types are loaded before using
the deserialisation interface. 'Foreign' icon types will probably
emit a serialised format the deserialises to a GBytesIcon.
We additionally clearly document what is required for being a consumer
or implementation of #GIcon.
Further patches will be required to GdkPixbuf and GVfsIcon to bring
their implementations in line with the new rules (essentially: introduce
implementations of the new serialize() API).
https://bugzilla.gnome.org/show_bug.cgi?id=688820
GBytesIcon is an icon that has a GBytes inside of it where the GBytes
contains some sort of encoded image in a widely-recognised file format.
Ideally this will be a PNG.
It implements GLoadableIcon, so GTK will already understand how to use
it, but we will add another patch there to make things more efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Split out the 'simple string format' cases of URIs, file paths and
themed icons to a separate function.
This function will be shared by g_icon_deserialize().
https://bugzilla.gnome.org/show_bug.cgi?id=688820
In the *_async_thread() functions, call the corresponding synchronous
function instead of calling the interface vfunc, which can be NULL.
In some cases the check for the vfunc == NULL was done, but to be
consistent it is better to always call the synchronous version (and the
code is simpler).
https://bugzilla.gnome.org/show_bug.cgi?id=548353
This feature is intended for clients that want to signal a desktop shell
their busy state, for instance because a long-running operation is
pending.
The API works in a similar way to g_application_hold and
g_application_release: applications can call g_application_mark_busy()
to increase a counter that will keep the application marked as busy
until the counter reaches zero again.
The busy state is exported read-only on the org.gtk.Application interface
for clients to use.
https://bugzilla.gnome.org/show_bug.cgi?id=672018
It is possible that the upstream servers return something, but
we then filter all results because they are of the wrong type.
In that case the API and subsequent GTask calls expect a GError
to be set.
https://bugzilla.gnome.org/show_bug.cgi?id=696857
to avoid warnings when built with -Wredundant-decls:
sessionmanager-presence-generated.c:316:1: warning: redundant redeclaration of ‘session_manager_presence_default_init’ [-Wredundant-decls]
sessionmanager-presence-generated.c:281:1: note: previous definition of ‘session_manager_presence_default_init’ was here
sessionmanager-presence-generated.c:1273:1: warning: redundant redeclaration of ‘object_default_init’ [-Wredundant-decls]
sessionmanager-presence-generated.c:1259:1: note: previous definition of ‘object_default_init’ was here
https://bugzilla.gnome.org/show_bug.cgi?id=696108
Expand and formalise the syntax for detailed action names, adding a
well-documented (and tested) public parser API for them.
Port the only GLib-based user of detailed action names to the new API:
g_menu_item_set_detailed_action(). The users in Gtk+ will also be
ported soon.
https://bugzilla.gnome.org/show_bug.cgi?id=688954
We need to close the stream *before* applying the file modes, because
g_file_replace() allocates a temporary file. At the moment we're
applying the modes to the extant file, then immediately rename()ing
over it with the default perms.
This regressed with commit 166766a89f.
The real fix here is to have g_file_create_with_info() so that we can
atomically create a file with the permissions we want.
https://bugzilla.gnome.org/show_bug.cgi?id=696014
_g_dbus_method_invocation_new is said to allow method_info == NULL,
but will crash inside g_dbus_method_info_ref when the method_info
really is NULL, because g_dbus_method_info_ref does not allow NULL as
parameter. Fixed by checking for NULL in _g_dbus_method_invocation_new
itself.
The leak itself happens because _g_dbus_method_invocation_new stores a
new reference to the method_info without also unreferencing it. Fixed
by adding the missing unref, protected by an if because the pointer
may be NULL.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=695376
