Several different codebases in GNOME want to implement wall clocks.
While we could pretty easily share a private library, it's not a
substantial amount of code, and GLib already has a lot of the
necessary system-specific detection and handling infrastructure.
Note this initial implementation just wakes up once a second in the
cancel_on_set case; we'll add the Linux-specific handling in a
subsequent commit.
https://bugzilla.gnome.org/show_bug.cgi?id=655129
* Load modules from paths listed in GIO_EXTRA_MODULES environment
variable first.
* Ignore duplicate modules based on module basename.
* Add the concept of GIOModuleScope which allows other callers to
skip duplicate loaded modules, or block specific modules based on
basename.
* Document behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=656914
Rework property getters to use a vfunc so we can take the fast path
and avoid allocating memory for both the skeleton and the proxy
cases. This requires some special case because of how GVariant expects
you to free memory in some cases, see #657100. Add test cases for
this.
Document the _get_ functions as not being thread-safe and also
generate _dup_ C getters (which are thread-safe).
Mark all the generated _get_, _dup_ and _set_ as (skip) as non-C
languages should just use GObject properties and not the (socalled)
"C binding".
Signed-off-by: David Zeuthen <davidz@redhat.com>
The main rationale for adding it was to avoid having gnome-shell
mmap'ing /etc/localtime once a second. However, we can just as easily
run inotify there, and given no one else was clamoring for a way to
detect when the time zone changes, I don't see a need for public API
here - at least not yet.
In the bigger picture, I just don't believe that the vast majority of
applications are going to go out of their way to instantiate and keep
around a random GTimeZoneMonitor class. And if they do, it's has the
side effect that for other bits of code in the process, local GDateTime
instances may start varying again!
So, if code can't rely on local GDateTime instances being in a
consistent state anyways, let's just do that always. The
documentation now says that this is the case. Applications have
always been able to work in a consistent local time zone by
instantiating a zone and then using it for GDateTime constructors.
We fix the "gnome-shell stats /etc/localtime once a second" issue by
using timerfd (in glib) and inotify (in gnome-shell).
https://bugzilla.gnome.org/show_bug.cgi?id=655129
At the same time, also add g_mkdtemp_full and g_dir_make_tmp
variants. The patch also unifies the unique-name-generating
code for all variants of mkstemp and mkdtemp and adds tests
for the new functions.
Based on patches by Paolo Bonzini,
http://bugzilla.gnome.org/show_bug.cgi?id=118563
This implements g_hmac_xxx() functionality using the standard checksum
functions supported by glib.
HMAC is a secure way to hash a key and a password. Many other
approaches fraught with append and prepend issues.
Includes test cases defined in relevant RFCs
https://bugzilla.gnome.org/show_bug.cgi?id=652480
The implementation of GValue is not public or documented. When
allocated on the stack, initializing a GValue is usually done as
documented with:
GValue value = { 0, };
There is lot code around (including WebKit) that added all the missing
fields, resulting in this ugly and non-obvious:
GValue value = { 0, { { 0 } } };
However, this doesn't play nice with -Wmissing-field-initializers for
example. Thus, G_VALUE_INIT.
http://bugzilla.gnome.org/show_bug.cgi?id=654793http://bugzilla.gnome.org/show_bug.cgi?id=577231
The database is an abstract object implemented by the various TLS
backends, which is used by GTlsConnection to lookup certificates
and keys, as well as verify certificate chains.
Also add GTlsInteraction, which can be used to prompt the user
for a password or PIN (used with the database).
https://bugzilla.gnome.org/show_bug.cgi?id=636572
Also add convenience _with_unix_fd_list variants to GDBusConnection,
GDBusProxy and GDBusMethodInvocation types to easily support this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is possible now that we have better support for object path
arrays, see
http://git.gnome.org/browse/glib/commit/?id=19878998bc386db78614f1c92ff8524a81479c7b
Note that this breaks the ABI of generated code but since
gdbus-codegen(1) has never yet been in a stable GLib release, this is
fine.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This commit changes GLib size units policy. We now prefer SI units and
allow for use of proper IEC units where desired.
g_format_size_for_display() which incorrectly mixed IEC units with SI
suffixes is left unmodified, but has been deprecated.
g_format_size() has been introduced which uses SI units and suffixes.
g_format_size_full() has also been added which takes a flags argument to
allow for use of IEC units (with correct suffixes). It also allows for
a "long format" output which includes the total number of bytes. For
example: "238.5 MB (238,472,938 bytes)".
Add G_VARIANT_TYPE_OBJECT_PATH_ARRAY along with accessor functions
g_variant_new_objv, g_variant_get_objv and g_variant_dup_objv. Also add
support for '^ao' and '^a&o' format strings for g_variant_new() and
g_variant_get().
https://bugzilla.gnome.org/show_bug.cgi?id=654955
This function implements the following logic:
if (g_variant_is_floating (value))
g_variant_ref_sink (value);
which is used for consuming the return value of callbacks that may or
may not return floating references.
This patch also replaces a few instances of the above code with the new
function (GSettings, GDBus) and lifts a long-standing restriction on the
use of floating values as the return value for signal handlers by
improving g_value_take_variant().
https://bugzilla.gnome.org/show_bug.cgi?id=627974
The function can be used to let regex compile non-NUL-terminated
strings without redesigning the way the pattern is stored in GRegex
objects and retrieved with g_regex_get_pattern.
https://bugzilla.gnome.org/show_bug.cgi?id=615895
This commit represents an API break to GAction in the following ways:
- the 'set_state' entry in the GActionInterface vtable has been
renamed to 'change_state'. The number and order of vtable items has
not otherwise changed.
- g_action_set_state() has been renamed to g_action_change_state() to
match the updated vtable entry.
- the "state" property of the GAction interface has been changed to
read-only to reflect the fact that g_action_set_state() no longer
exists.
- GSimpleActionClass has been hidden. GSimpleAction can no longer be
subclassed.
>> Rationale
g_action_set_state() has never been a true setter in the sense that
calling it will update the value of the "state" property. It has always
been closer to "request 'state' to be changed to this value" with
semantics defined by the implementor of the interface. This is why the
equivalent method in GActionGroup had its name changed from 'set' to
'change'. This change makes the two interfaces more consistent and
removes any implication about the effect that calling set_state() should
have on the 'state' property.
>> Impact
This incompatible API break was undertaken only because I strongly
suspect that it will go entirely unnoticed. If the break actually
affects anybody, then we will accommodate them (possibly going as far as
to revert this commit entirely).
The virtual table change only impacts implementors of GAction. I
strongly suspect that this is nobody (except for GSimpleAction).
The hiding of GSimpleActionClass only impacts impacts subclasses of
GSimpleAction. I strongly suspect that none of these exist.
The changing of the property to be read-only only affects people who
were trying to change the state by using GObject properties. I strongly
suspect that this is nobody at all.
The removal of the g_action_set_state() call is the most dangerous, but
I still suspect that it will impact nobody outside of GLib. If anybody
is impacted by this change then, at their request, I will reintroduce
the API as a deprecated alias for g_action_change_state().
Rather than having the gtk-doc build machinery have a list of header
files to exclude, change the GLib build to dump a list of public
header files generated from the maintained Makefile.am files for
each of glib/, gobject/, gio/.
Also, for glib, always install glib-unix.h, even on non-Unix
platforms, for the same reason we install gwin32.h even on Unix.
https://bugzilla.gnome.org/show_bug.cgi?id=651745
See https://bugs.freedesktop.org/show_bug.cgi?id=37890#c6 where it was
discovered that dbus-send(1) actually doesn't work (either libdbus-1's
flush implementation or dbus-send(1)'s usage of it is broken) so it's
useful to have here.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This avoids the generated types (e.g. ExampleAnimal, ExampleCat,
ExampleObject and ExampleObjectManagerClient) being referenced in the
core gio docs. This was requested by Matthias.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- remove all inline assembly versions
- implement the atomic operations using either GCC intrinsics, the
Windows interlocked API or a mutex-based fallback
- drop gatomic-gcc.c since these are now defined in the header file.
Adjust Makefile.am accordingly.
- expand the set of operations: support 'get', 'set', 'compare and
exchange', 'add', 'or', and 'xor' for both integers and pointers
- deprecate g_atomic_int_exchange_and_add since g_atomic_int_add (as
with all the new arithmetic operations) now returns the prior value
- unify the use of macros: all functions are now wrapped in macros that
perform the proper casts and checks
- remove G_GNUC_MAY_ALIAS use; it was never required for the integer
operations (since casting between pointers that only vary in
signedness of the target is explicitly permitted) and we avoid the
need for the pointer operations by using simple 'void *' instead of
'gpointer *' (which caused the 'type-punned pointer' warning)
- provide function implementations of g_atomic_int_inc and
g_atomic_int_dec_and_test: these were strictly macros before
- improve the documentation to make it very clear exactly which types
of pointers these operations may be used with
- remove a few uses of the now-deprecated g_atomic_int_exchange_and_add
- drop initialisation of gatomic from gthread (by using a GStaticMutex
instead of a GMutex)
- update glib.symbols and documentation sections files
Closes#650823 and #650935
For example, if setting a property on a skeleton from another thread
than where it was constructed, the idle handler responsible for
emitting the PropertiesChanged() signal could run immediately and
clear skeleton->priv->changed_properties_idle_source causing
g_source_unref() to be called with a NULL pointer. This race was
easily be fixed by adding a lock to the skeleton object.
In addition to fixing this race, also move the code for setting up the
idle handler to a class handler for the GObject::notify signal. This
change allows use of g_object_freeze_notify() and g_object_thaw_notify()
to perform atomic property changes from another thread than the one
that the skeleton was created in.
Signed-off-by: David Zeuthen <davidz@redhat.com>
.. and add a C setter to do this. Also make the C getter return a
reference since the property may be set from another thread. Also
change the constructor to _not_ take a GDBusConnection since this is
something you almost always want to do _after_ creating it. The
API/ABI break is fine as there has never been a GLib release with this
type.
https://bugzilla.gnome.org/show_bug.cgi?id=648959
Signed-off-by: David Zeuthen <davidz@redhat.com>
This new API allows watching a few select Unix signals;
looking through the list on my system, I didn't see anything
else that I think it'd reasonable to watch.
We build on the previous patch to make the child watch helper thread
that existed on Unix handle these signals in the threaded case.
In the non-threaded case, they're just global variables.
https://bugzilla.gnome.org/show_bug.cgi?id=644941
GLib historically has been designed to be "mostly" portable; there
are some functions only available on Unix like g_io_channel_unix_new(),
but these are typically paired with obvious counterparts for Win32.
However, as GLib is used not only by portable software, but components
targeting Unix (or even just Linux), there are a few cases where it
would be very convenient if GLib shipped built-in functionality.
This initial patch is a basic wrapper around pipe2(), including
fallbacks for older kernels. This pairs well with the
existing g_spawn_*() API and its child_setup functionality.
However, in the future, I want to add a signal() wrapper here,
complete with proxying the signal to a mainloop. I have initial code
for this, but doing it sanely (including factoring out gmain.c's
private worker thread), is a complex task, and I don't want to block
on that.
See also gwin32.h for Win32 specific functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=644941
And use this for a) documentation purposes; and b) to preserve C ABI
when an interface is extended. See
https://bugzilla.gnome.org/show_bug.cgi?id=647577#c5
for more details. Also add test cases for this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without getting into a debate about the reasons why you may or may not
want to use unsigned integers, it's sufficient to note that people have
been using them and requesting this functionality.
Bug #641755.
Make the schema argument to gsettings list-recursively optional.
This allows to search for not exactly known keys by going
gsettings list-recursively | grep 'font'
g_variant_new("as", NULL); now gives an empty array of strings, for
example.
This was documented as working already, but was never actually
implemented (due to the fact that it muddies the water when considering
maybe types). It's being implemented now because its convenience to
programmers exceeds any damage done to the conceptual purity of the API.
One new GUnicodeBreak enum member. Three new GUnicodeScript members,
and one member renamed to fix a typo.
Tests, docs, and scripts are updated. PCRE update still needed.
The existing docs are a bit inconsistent in that they say to follow
the dbus convention, but then give an example that doesn't.
This commit changes things to be how Ryan says they should be.
This commit also changes (maintaining compatibility) the way
user-specified default applications are stored (as in, those for which
g_app_info_set_as_default_for_type() has been called.
We now store the default application for a content type in a new group
in the mimeapps.list keyfile, and "Added Associations" tracks only the
applications that have been added by the user, following a
most-recently-used first order.
This is useful in GtkAppChooser-like widgets to pre-select the last used
application when constructing a widget.
https://bugzilla.gnome.org/show_bug.cgi?id=636311
The necessary review and integration work has not happened, and
we don't want to enshrine it in this unproven state.
It will be back when the world is ready for it.
Make the certificate and peer-certificate properties virtual, and add
peer-certificate-errors as well. Change the documentation on
peer-certificate to say that it's not set until after the handshake
succeeds (which means notify::peer-certificate can be used to tell
when a handshake has completed).
Trying to do this as a signal won't work well with either
GTlsCertificateDB (in which case looking up a certificate in the db is
a blocking/asynchronous act) or session resumption support (in which
case the certificate or lack thereof is part of the session definition
and so needs to be known immediately). Make the caller use
g_tls_connection_set_certificate() ahead of time (or when retrying)
instead.
Add a method to verify a certificate against a CA; this can be used
for apps that need to test against non-default CAs.
Also make the GTlsCertificate::issuer property virtual
This adds an extension point for TLS connections to gio, with a
gnutls-based implementation in glib-networking.
Full TLS support is still a work in progress; the current API is
missing some features, and parts of it may still be changed before
2.28.
https://bugzilla.gnome.org/show_bug.cgi?id=588189
GProxyConnection is a class that was added for proxy support;
g_socket_client_connect() returns a GSocketConnection, but in some
cases (eg, encrypted SOCKS), GProxy might return a GIOStream that is
not a GSocketConnection. In that case, GSocketClient would wrap the
stream up in a GProxyConnection, which is a subclass of
GSocketConnection but uses the input/output streams of the wrapped
connection.
GTlsConnection is not a GSocketConnection, so it has the same problem,
so it will need the same treatment. Rename the class to
GTcpWrapperStream, and make it public, so people can extract the base
stream from it when necessary.
(This is not ideal and GSocketClient will need to be revisited as an
API at some point...)
https://bugzilla.gnome.org/show_bug.cgi?id=588189
When interfacing with APIs that expect unix-style async I/O, it is
useful to be able to tell in advance whether a read/write is going to
block. This adds new interfaces GPollableInputStream and
GPollableOutputStream that can be implemented by a GInputStream or
GOutputStream to add _is_readable/_is_writable, _create_source, and
_read_nonblocking/_write_nonblocking methods.
Also, implement for GUnixInput/OutputStream and
GSocketInput/OutputStream
https://bugzilla.gnome.org/show_bug.cgi?id=634241
g_cancellable_create_source() returns a GSource that triggers when its
corresponding GCancellable is cancelled. This can be used with
g_source_add_child_source() to add cancellability to a source.
Port gasynchelper's FDSource to use this rather than doing its own
cancellable handling, and also fix up its callback argument order to
be more normal.
https://bugzilla.gnome.org/show_bug.cgi?id=634239
This adds "child source" support to GSource. A child source behaves
basically like a GPollFD; when you add a source to a context, all of
its child sources are added with the same priority; when you destroy a
source, all of its child sources are destroyed; and when a child
source triggers, its parent source's dispatch function is run.
Use cases include:
- adding a GTimeoutSource to another source to cause the source to
automatically trigger after a certain timeout.
- wrapping an existing source type with a new type that has
a different callback signature
- creating a source that triggers based on different conditions
at different times.
https://bugzilla.gnome.org/show_bug.cgi?id=634239
Add support for passing the full contents of the environment to the
primary instance (by storing it in the platform_data) when
G_APPLICATION_SEND_ENVIRONMENT is in the flags.
Add some helpers for freeing a linked list along with its elements by
providing a GDestroyNotify to call on each of them.
Add a test.
Based on a patch from Cosimo Cecchi.
Add some words and example code to the documentation about why you might
want to manually invoke gsettings-data-convert and how you should go
about doing that.
Timezone handling is complicated. Really complicated.
In order to simplify it a little bit, we need to expose the GTimeZone
structure.
First of all, we allow creating time zone information directly from the
offset and the DST state, and then pass it to the g_date_time_new_full()
constructor. We also need to clean up the mess that is UTC-vs.-localtime
for the other constructors.
We also allow creating a GTimeZone from the Olson zoneinfo database
names; a time zone created like this will be "floating": it will just
reference the zoneinfo file - which are mmap()'ed, kept in a cache and
refcounted. Once the GTimeZone has been associated with a GDateTime, it
will be "anchored" to it: the offset will be resolved, as well as the
DST state.
https://bugzilla.gnome.org/show_bug.cgi?id=50076
These functions are meant to replace the read_until() flavour, with the
following improvements:
- consistency between the synchronous and asynchronous versions as to
if the separator character is read (it never is).
- support for using a nul byte as a separator character by way of
addition of a length parameter which allows stop_chars to be treated
as a byte array rather than a nul-terminated string.
The read_until() functions are not yet formally deprecated, but a note
has been added to the documentation warning not to use them as they will
be in the future.
This is bug #584284.
Since we added g_object_notify_by_pspec(), an efficient way to install
and notify properties relies on storing the GParamSpec pointers inside
a static arrays, like we do for signal identifiers.
Instead of multiple calls to g_object_class_install_property(), we
should have a single function to take the static array of GParamSpecs
and iterate it.
https://bugzilla.gnome.org/show_bug.cgi?id=626919
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Rework filter functions as per
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
This commit breaks ABI. However, this ABI break affects only
applications using filter functions. The only known user of is dconf.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Don't actually use this yet as that will require a couple of
modifications to the filter function signature. This is part of the
bug-fix for
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
Signed-off-by: David Zeuthen <davidz@redhat.com>
... that is, make it private. This makes sense because users are never
expected to create such objects themselves - only the GDBus core will
need this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Allow modifying a GDBusMessage in a filter function and also add tests
for this. This breaks API but leaves ABI (almost) intact - at least
dconf's GSettings backend (the only big user I know of) will keep
working.
https://bugzilla.gnome.org/show_bug.cgi?id=624546
Signed-off-by: David Zeuthen <davidz@redhat.com>
This allow application to take control over certain proxy protocol
handling. When a proxy protocol must be used and is found in the
application proxies, GSocketClient will simply TCP connect to the proxy
server and return the connection.
Reviewed-by: Dan Winship <danw@gnome.org>
Using this rather than g_socket_client_connect() or
g_socket_client_connect_to_host() allows #GSocketClient to
determine when to use application-specific proxy protocols.
Reviewed-by: Dan Winship <danw@gnome.org>
This functionnallity can be disabled using property enable-proxy. It
enumerates addresses using GSocketConnectable::proxy_enumerate() instead of
enumerate(). When the returned address is of type GProxyAddress (a type
based on GInetSocketAddress), it gets the proxy protocol handler using
g_proxy_get_default_for_protocol() and call connect() on it.
Reviewed-by: Dan Winship <danw@gnome.org>
This patch implements method proxy_enumerate from GSocketConnectable for
all connectables (GNetworkAddress, GNetworkService, GInetSocketAddress
and GUnixSocketAddress).
Reviewed-by: Dan Winship <danw@gnome.org>
An implementation of GSocketAddressEnumerator that handles proxy
enumeration. This class is mainly usefull for Connectables implementation
such as NetworkService, NetworkAddress and SocketAddress to handle proxies.
Reviewed-by: Dan Winship <danw@gnome.org>
Implement an extension point for proxy protocol implementation. This
is mainly useful for socket-based proxy where it is possible to use the
proxied socket the same way it would for other stream based socket.
Reviewed-by: Dan Winship <danw@gnome.org>
This method allow creating a network address from a URI. If no port is
found in the URI, the default_port parameter will be used. Note that new
property scheme is there for future TLS implementation.
Reviewed-by: Dan Winship <danw@gnome.org>
A GSocketInetAddress representing the proxy server address with additional
properties proxy type, destination address and port, username and password.
Reviewed-by: Dan Winship <danw@gnome.org>
This extension point allow extending GLib with library like LibProxy that
interprets system proxy settings and finds the appropriate configuration
based on the type of connection being made.
Reviewed-by: Dan Winship <danw@gnome.org>
Add GZlibCompressor:file-info property. If it contains a non-NULL
GFileInfo, and the compressor is in GZIP mode, the filename and
modification time from the file info are written to the GZIP header
in the output data.
Add GZlibDeompressor:file-info property. If the decompressor is in GZIP
mode, and the GZIP data contains a GZIP header, the filename and
modification time are read from it, stored in a GFileInfo, and the
file-info property is notified.
Bug #617691.
If sending a lot of data and/or the other peer is not reading it, then
socket buffers can overflow. This is communicated from the kernel by
returning EAGAIN. In GIO, it is modelled by g_output_stream_write()
and g_socket_send_message() returning G_IO_ERROR_WOULD_BLOCK.
It is also problematic that that we're using synchronous IO in the
shared GDBus IO thread. It means that one GDBusConnection can lock up
others.
It turns out that by porting from g_output_stream_write() to
g_output_stream_write_async() we fix the EAGAIN issue. For GSocket, we
still need to handle things manually (by creating a GSource) as
g_socket_send_message() is used.
We check the new behavior in Michael's producer/consumer test case (at
/gdbus/overflow in gdbus-peer.c) added in the last commit.
Also add a test case that sends and receives a 20 MiB message.
Also add a new `transport' G_DBUS_DEBUG option so it is easy to
inspect partial writes:
$ G_DBUS_DEBUG=transport ./gdbus-connection -p /gdbus/connection/large_message
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 0 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 128000 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 256000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 43669 bytes of message with serial 4 and
size 20971669 from offset 20928000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 16 bytes of message with serial 3 and
size 20971620 to offset 0 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 15984 bytes of message with serial 3 and
size 20971620 to offset 16 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 16000 bytes of message with serial 3 and
size 20971620 to offset 16000 from a GSocketInputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 144000 bytes of message with serial 3 and
size 20971620 to offset 20720000 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 107620 bytes of message with serial 3 and
size 20971620 to offset 20864000 from a GSocketInputStream
OK
https://bugzilla.gnome.org/show_bug.cgi?id=626748
Signed-off-by: David Zeuthen <davidz@redhat.com>
Previously if a GSocketConnection had a blocking GSocket, it would
sometimes block during asynchonous I/O, and if it had a non-blocking
socket, it would sometimes return G_IO_ERROR_WOULD_BLOCK from
synchronous I/O. This fixes the connection to not depend on the socket
state.
https://bugzilla.gnome.org/show_bug.cgi?id=616458
This prints all GDBusMethodInvocation API usage and is normally used
with the `incoming' option. Example:
# G_DBUS_DEBUG=incoming,return ./polkitd --replace
Entering main event loop
Connected to the system bus
Registering null backend at priority -10
[...]
Acquired the name org.freedesktop.PolicyKit1
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.26
serial 299
========================================================================
GDBus-debug:Return:
>>>> METHOD ERROR org.freedesktop.PolicyKit1.Error.Failed
message `Cannot determine session the caller is in'
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.26
reply-serial 299
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.2402
serial 25
========================================================================
GDBus-debug:Return:
>>>> METHOD RETURN
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.2402
reply-serial 25
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also use this in the test cases to check that serialization to and
from both big and little endian works.
Signed-off-by: David Zeuthen <davidz@redhat.com>
