statfs/statvfs is called several times when querying filesystem info.
This is because the G_FILE_ATTRIBUTE_FILESYSTEM_REMOTE attribute is set
over is_remote_fs function, which calls statfs/statvfs again. Let's use
the already known fstype instead of redundant statfs/statvfs calls.
This also changes g_local_file_is_remote implementation to use
g_local_file_query_filesystem_info to obtain fstype, which allows to
remove duplicated code from is_remote_fs function.
The G_FILE_ATTRIBUTE_FILESYSTEM_REMOTE currently works only for locations
in the home directory. Let's make it work also for files outside the home
directory.
There are glocalfile.h and glocalfileprivate.h header files currently.
None of those header files is public, so it doesn't make sense to have
two private headers for glocalfile.c. Let's remove glocalfileprivate.h.
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In glib-networking#127, it was reported that we don't properly implement
the documented behavior of these properties. However, we cannot fix it
because libsoup relies on the implemented behavior, and it's hard to
change that without cascading breakage. The practical solution is to
adjust our documentation to match reality. There should be no downsides
to this, and compat risk of changing the documentation is much smaller
than risk of changing the implementation, so I think this is the best we
can make of an unfortunate situation. See glib-networking#127 for full
discussion and glib-networking#129 for the regression when we attempted
to match the documented behavior.
Some editors automatically remove trailing blank lines, or
automatically add a trailing newline to avoid having a trailing
non-blank line that is not terminated by a newline. To avoid unrelated
whitespace changes when users of such editors contribute to GLib,
let's pre-emptively normalize all files.
Unlike more intrusive whitespace normalization like removing trailing
whitespace from each line, this seems unlikely to cause significant
issues with cherry-picking changes to stable branches.
Implemented by:
find . -name '*.[ch]' -print0 | \
xargs -0 perl -0777 -p -i -e 's/\n+\z//g; s/\z/\n/g'
Signed-off-by: Simon McVittie <smcv@collabora.com>
While these assertions look right at the first glance,
they actually crash the program. That's because GObject
insists on initializing all construct-only properties
to their default values, which results in
g_win32_registry_key_set_property() being called multiple
times with NULL string, once for each unset property.
If "path" is actually set by the caller, a subsequent
call to set "path-utf16" to NULL will fail an assertion,
since absolute_path is already non-NULL.
With assertions moved the set-to-NULL calls bail out before
an assertion is made.
This ensures that we do really export the symbols for Visual
Studio-style builds, by using _GLIB_EXTERN to decorate the generated
prototypes and including config.h so that we are sure the symbols are
actually exported.
This adds three options to gdbus-codegen so that we may be able to
use a self-defined symbol decorator, such as _GLIB_EXTERN, to decorate
the generated prototypes, to be used possibly to export the symbols, if
needed.
The other two options allows including headers that are required for the
specified symbol decorator to be usable and preprocessor macros that are
required for the symbol decorator to be defined appropriately, also when
needed.
Have the generated .c code decorate the prototypes with "G_MODULE_EXPORT"
instead of "extern" when --internal is not being used, so that we also
export the symbols from the generated code on Visual Studio-style
compilers. If --internal is used, we decorate the prototypes with
"G_GNUC_INTERNAL", as we did before.
Note that since the generated .c code does not attempt to include the
generated headers (if one is also generated), the gnerated headers are
still generated as they were before.
Sometimes this test was timing out due to the file monitor notifications
taking longer than the arbitrary 2s delay before ending the test and
checking its results at the end of `iclosed_cb()`.
Avoid that timing-dependence by ending the test when the expected file
monitor notifications are seen, or after a 10s timeout (if so, the test
is failed).
This makes the test run 4× faster in the normal case, as it’s no longer
waiting for a timeout to elapse if the file monitor notifications come
in sooner.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The test added for #1841 spawned 100000 threads. That was fine on a
desktop machine, but on a heavily loaded CI machine, it could result in
large (and unpredictable) slowdowns, resulting in the test taking over
120s in about 1 in 5 runs, and hence failing that CI pipeline due to a
timeout. When passing normally on CI, the test would take around 90s.
Here’s a histogram of time per iteration on a failing (timed out) test
run. Each iteration is one thread spawn:
Iteration duration (µs) | Frequency
------------------------+----------
≤100 | 0
100–200 | 30257
200–400 | 13696
400–800 | 1046
800–1000 | 123
1000–2000 | 583
2000–4000 | 3779
4000–8000 | 4972
8000–10000 | 1027
10000–20000 | 2610
20000–40000 | 650
40000–80000 | 86
80000–100000 | 10
100000–200000 | 2
>200000 | 0
There’s no actual need for the test to spawn 100000 threads, so rewrite
it to reuse a single thread, and pass new data to that thread.
Reverting the original commit (e4a690f5dd) reproduces the failure on
100 out of 100 test runs with this commit applied, so the test still
works.
The test now takes 3s, rather than 11s, to run on my computer, and has
passed when run with `meson test --repeat 1000 cancellable`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
An extra argument to g_win32_registry_key_get_value_w() and
g_win32_registry_key_get_value() indicates that RegLoadMUIStringW()
should be used instead of RegQueryValueExW(). It only works on
strings, and automatically resolves resource strings (the ones
that start with "@").
The extra argument is needed to find resource DLLs that are only
specified by their relative name.
It is critical to mention how the identity parameter is expected to be
handled. In particular, if identity is not passed, then the identity of
the server certificate will not be checked at all. This is in contrast
to the connection-level APIs, which are supposed to be fail-safe. The
database and certificate-level APIs are more manual.
There’s no need to call `access()` and then `stat()` on the keyring
directory to check that it exists, is a directory, and has the right
permissions. Just call `stat()`.
This eliminates one potential TOCTTOU race in this code.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1954
There was a time-of-check-to-time-of-use (TOCTTOU) race in the keyring
lock code, where it would check the existence of the lock file using
`access()`, then proceed to call `open(O_CREAT | O_EXCL)` to try and
create the lock file once `access()` showed that it didn’t exist.
The problem is that, because this is happening in a shared directory
(`~/.dbus-keyrings`), another process could quite legitimately create
the lock file in the meantime.
Instead, unconditionally call `open()` and ignore errors from it (which
will be returned if the lock file already exists) until it succeeds (or
the code times out).
This eliminates the TOCTTOU race, and simplifies the timeout behaviour
so there aren’t two loops (check for existence, try to create)
happening. It brings this code in line with what dbus.git does (see
`_dbus_keyring_lock()`).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1954
When multiple tests were run in parallel, this would race on its access
to `~/.dbus-keyrings` to authenticate with the D-Bus server, since the
keyring directory was not appropriately sandboxed to the unit test.
Use `G_TEST_OPTION_ISOLATE_DIRS` to automatically isolate each unit
test’s directory usage.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1954
Commit 721e385 left one remaining race in the filter test, with a
comment associated with it. Unfortunately, the (seemingly unrelated)
changes in #1841 to `GCancellable` seem to have made this remaining race
a lot more likely to fail on FreeBSD than before.
What’s likely to have happened (although I was unable to reproduce the
failure, due to not having a FreeBSD system; I was only able to
reproduce the problem as a 3/1000 failure on Linux, which is still worth
fixing) is that the atomic write of the `FilterData.serial` to be
expected by the filter function sometimes happened after the filter
function had executed, so the expected message was dropped and didn’t
result in an update to the `FilterData` state.
Rework the test so that instead of setting some expectations (on
`FilterData`) in one thread and then checking them in another thread,
the worker thread just unconditionally returns messages from the filter
function to the main thread, and then the main thread checks whether the
expected one has been filtered.
With this change applied, the `gdbus-connection` test passes 5000 times
in a row for me, on Linux; and doesn’t seem to fail any more on the
FreeBSD CI machines over a few runs. (Previously it failed on 4/5 runs.)
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #2092Fixes: #1957
Mention in the documentation that (presumably for performance reasons)
the search results from `g_desktop_app_info_search()` are not filtered
by executable presence or hidden attribute.
Perhaps they should be in future, but for now we should at least
document it.
Spotted by Will Thompson.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By default, meson builds glib with -Werror=format=2, which
implies -Werror=format-nonliteral. With these flags, clang errors
out on e.g. the g_message_win32_error function, due to "format
string is not a string literal". This function takes a format
string, and passes the va_list of the arguments onwards to
g_strdup_vprintf, which is annotated with printf attributes.
When passing a string+va_list to another function, GCC doesn't warn
with -Wformat-nonliteral. Clang however does warn, unless the
functions themselves (g_message_win32_error and set_error) are decorated
with similar printf attributes (to force the same checks upon the
caller) - see
https://clang.llvm.org/docs/AttributeReference.html#format
for reference.
Adding these attributes revealed one existing mismatched format string
(fixed in the preceding commit).
The GIO tests memory-monitor-dbus and memory-monitor-portal use a number
of third party Python modules that may not be present when running the
test case.
Instead of failing due to missing imports, catch the ImportError and
mock a test case that skips. This can't use the usual unittest.skip
logic because the test case class itself uses a 3rd party module.
Closes#2083.
There are two memory monitor tests that use Python's unittest module directly,
but GLib tests should be outputting TAP. Use the embedded TAPTestRunner to
ensure that TAP is output for these tests too.
The G_FILE_ATTRIBUTE_STANDARD_CONTENT_TYPE attribute doesn't have to be
always set. See https://gitlab.gnome.org/GNOME/gvfs/-/merge_requests/68
for more details. In that case, the g_file_query_default_handler function
fails with the "No application is registered as handling this file" error.
Let's fallback to the "standard::fast-content-type" attribute instead to
fix issues when opening such files.
https://gitlab.gnome.org/GNOME/nautilus/-/issues/1425
Meson 0.54.0 added a new method meson.override_dependency() that must be
used to ensure dependency consistency. This patch ensures a project that
depends on glib will never link to a mix of system and subproject
libraries. It would happen in such cases:
The system has glib 2.40 installed, and a project does:
dependency('glib-2.0', version: '>=2.60',
fallback: ['glib', 'glib_dep'])
dependency('gobject-2.0')
The first call will configure glib subproject because the system libglib
is too old, but the 2nd call will return system libgobject.
By overriding 'gobject-2.0' dependency while configuring glib subproject
during the first call, meson knows that on the 2nd call it must return
the subproject dependency instead of system dependency.
This also has the nice side effect that with Meson >0.54.0 an
application depending on glib can declare the fallback without knowing
the dependency variable name: dependency('glib-2.0', fallback: 'glib').
Slightly unexpectedly, `g_icon_serialize()` doesn’t produce a floating
`GVariant`, it produces one with full ownership and returns that. That’s
not the convention for `GVariant` return values from functions which
build variants, but there’s nothing we can do to change this now as that
would be an API break.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
D-Bus filter functions run in a worker thread. The `gdbus-connection`
test was sharing a `FilterData` struct between the main thread and the
filter function, which was occasionally (on the order of 0.01% of test
runs) causing spurious test failures due to racing on reads/writes of
`num_handled`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #480
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #480
If a username and password are specified by the caller, `GSocks5Proxy`
tells the server that it supports anonymous *and* username/password
authentication, and the server can choose which it prefers.
Otherwise, `GSocks5Proxy` only says that it supports anonymous
authentication. If that’s not acceptable to the server, the code was
previously returning `G_IO_ERROR_PROXY_AUTH_FAILED`. That error code
doesn’t indicate to the caller that authentication might succeed were
they to provide a username and password.
Change the error handling to make that clearer. A fuller solution would
be to expose more of the method negotiation in the `GSocks5Proxy` API,
so that the caller can specify ahead of time which authentication
methods they want to use. That can follow in issue #2059 though.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1988
They were not actually asynchronous, and hence caused blocking in the
main thread. Deleting them means the default implementation of those
vfuncs is used, which runs the sync implementation in a thread — which
is what is wanted here.
Spotted by Benjamin Otte.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #2051
There’s a minor race condition between cancellation of a `GCancellable`,
and disposal/finalisation of a `GCancellableSource` in another thread.
Thread A Thread B
g_cancellable_cancel(C)
→cancellable_source_cancelled(C, S)
g_source_unref(S)
cancellable_source_dispose(S)
→→g_source_ref(S)
→→# S is invalid at this point; crash
Thankfully, the `GCancellable` sets `cancelled_running` while it’s
emitting the `cancelled` signal, so if `cancellable_source_dispose()` is
called while that’s high, we know that the thread which is doing the
cancellation has already started (or is committed to starting) calling
`cancellable_source_cancelled()`.
Fix the race by resurrecting the `GCancellableSource` in
`cancellable_source_dispose()`, and signalling this using
`GCancellableSource.resurrected_during_cancellation`. Check for that
flag in `cancellable_source_cancelled()` and ignore cancellation if it’s
set.
The modifications to `resurrected_during_cancellation` and the
cancellable source’s refcount have to be done with `cancellable_mutex`
held so that they are seen atomically by each thread. This should not
affect performance too much, as it only happens during cancellation or
disposal of a `GCancellableSource`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1841
`g_assert()` is compiled out if `G_DISABLE_ASSERT` is defined, and
`g_assert_*()` gives more detailed failure messages.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Guard against NULL type being passed to
g_content_type_get_generic_icon_name() just as we protect
g_content_type_get_description(), otherwise it will cause a crash.
See https://gitlab.gnome.org/GNOME/gtk/issues/2482
Distributions will likely want to update GLib before
GObject-Introspection, to avoid circular dependencies.
Signed-off-by: Simon McVittie <smcv@debian.org>
It was checking for the main SOCKS5 version number, rather than the
subnegotiation version number. The username/password authentication
protocol is described in https://tools.ietf.org/html/rfc1929.
Spotted and diagnosed by lovetox.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1986
Clang warns about string+int not appending to the string (to try and
catch newbie mistakes). While this test didn’t expect that to happen, it
was substituting the same constant string in multiple places for no good
reason. Switch to a single static const string, which should also fix
the compiler warning.
We have to define the string length since it’s used in various
stack-allocated array lengths. This is the easiest fix without more
major refactoring of the test to be less 90s.
Also make things a bit more static.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When running under CI, each iteration takes so long that the total test
time is around 200s. If the CI runner is highly loaded, this can tip it
over the timeout of 360s.
Reduce the iteration counts unless running the test thoroughly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Currently the test waits for 1s before deciding that a refcount has been
leaked. But slow test machines might take longer than that between
scheduling different threads to sort out the refcount, so increase the
timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Previously, if the `--address` option was passed to `gdbus-tool`, it
would treat the connection as peer to peer. However, almost all the
commands `gdbus-tool` supports require a message bus (introspection,
calling a method with a destination, etc.). Only the `signal` command
would ever work on a peer-to-peer connection (if no `--dest` was
specified).
So change the `--address` option to generally create message bus
connections.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #938
bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Add a note to the documentation of
`g_dbus_connection_signal_unsubscribe()`, `g_bus_unwatch_name()` and
`g_bus_unown_name()` warning about the need to continue iterating the
caller’s thread-default `GMainContext` until the
unsubscribe/unwatch/unown operation is complete.
See the previous few commits and #1515 for an idea of the insidious bugs
that can be caused by not iterating the `GMainContext` until
everything’s synchronised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
`CallDestroyNotifyData` never uses that `GMainContext`, and holding a
ref to it could cause reference count cycles if the `GMainContext` is no
longer being iterated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
The fix for bgo#651133 (commit 7e0f890e38) introduced a kind of weak
ref, which had to be thread-safe due to the fact that `GDBusProxy`
operates in one thread but can emit signals in another.
Since that commit, `GWeakRef` was added, which does the same thing. Drop
the custom code in favour of it; this should be functionally equivalent,
but using an RW lock rather than a basic mutex, which should reduce
contention.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
mtab_file_changed_id is not currently removed when finalizing, which
could potentially lead to segfaults. Let's remove the source when
finalizing to avoid this.
mtab_file_changed_id might be set on thread default context, but it is
always cleared on the global context because of usage of g_idle_add. This
can cause the emission of redundant "mounts-change" signals. This should
not cause any issues to the client application, but let's attach the idle
source to the thread-default context instead to avoid those races for sure.
The `get_mounts_timestamp()` function uses `mount_poller_time` when
`proc_mounts_watch_source` is set, but the `mount_poller_time` is not
initialized in the same time as `proc_mounts_watch_source`. This may
cause that zero, or some outdated value is returned. Let's initialize
`mount_poller_time` to prevent invalid values to be returned.
The Nautilus test suite often crashes with "GLib-FATAL-CRITICAL:
g_source_is_destroyed: assertion 'g_atomic_int_get (&source->ref_count)
> 0' failed" if it is started with "GIO_USE_VOLUME_MONITOR=unix". This
is because GUnixMountMonitor is simultaneously used from multiple
threads over GLocalFile and GVolumeMonitor APIs. Let's add guards for
proc_mounts_watch_source and mount_poller_time variables to prevent
those crashes.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2030
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
This is a fairly large refactoring. The highlights are:
- Removing in-progress connections/addresses from GSocketClientAsyncConnectData:
This caused issues where multiple ConnectionAttempt's would step over eachother
and modify shared state causing bugs like accidentally bypassing a set proxy.
Fixes#1871Fixes#1989Fixes#1902
- Cancelling address enumeration on error/completion
- Queuing successful TCP connections and doing application layer work serially:
This is more in the spirit of Happy Eyeballs but it also greatly simplifies
the flow of connection handling so fewer tasks are happening in parallel
when they don't need to be.
The behavior also should more closely match that of g_socket_client_connect().
- Better track the state of address enumeration:
Previously we were over eager to treat enumeration finishing as an error.
Fixes#1872
See also #1982
- Add more detailed documentation and logging.
Closes#1995
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
There were a couple of custom paths which could end up being relative,
rather than absolute, due to not properly prefixing them with
`get_option('prefix')`.
The use of `join_paths()` here correctly drops all path components
before the final absolute path in the list of arguments. So if someone
configures GLib with an absolute path for `gio_module_dir`, that will be
used unprefixed; but if someone configures with a relative path, it will
be prefixed by `get_option('prefix)`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1919
The loops should continue iterating if the timeout is non-zero and we're
still waiting for the updated value. Otherwise, if things break, we'll
be waiting until we receive a value that never arrives.
"gio info" output doesn't contain any information about mount points, but
that information can be useful when debugging issues in facilities that
depend on knowing about mount points, such as the trash API.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Co-authored-by: Ondrej Holy <oholy@redhat.com>
Documentation says that g_file_peek_path() returns exactly the same
what g_file_get_path(), but this is not true. Apart from that the code
segfaults for some uris (e.g. for "trash:///"), it returns target-uri
for trash and recent schemes. This is unexpected and can lead to various
issues among others because the target-uri paths are not automatically
translated back to GDaemonFile as it is done with gvfsd-fuse paths.
g_file_get_path() returns NULL for trash and recent schemes, because
fuse paths are not provided for those schemes. So g_file_peek_path()
should return NULL as well. It is up to the concrete application to
use target-uri when appropriate.
This change was made as a part of commit 4808a957, however, neither
the commit message, neither the corresponding bug doesn't mention this
crucial change and doesn't give any clear reasoning. So let's revert
this.
The GMemoryMonitor interface uses G_DECLARE_INTERFACE, which provides a
typedef for the interface dummy type. We declare the same type inside
the global giotypes.h header, which leads to typedef redeclaration
warnings on toolchains that do not support—intentionally or not—the C11
feature of typedef redefinition.
While we do have a toolchain requirement for C11 typedef redefinitions
listed on our wiki, we also suspended it temporarily to allow users of
non-C11 compilers to work on newer versions of GLib; so, let's keep them
working a while longer.
Python tuple comparisons actually do what we want for comparing major
and minor versions, so tidy things up by using that.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This reverts commit b6d8efbebc.
This GLib API is good, but the implentation is not ready, so there's no
reason to commit to the API in GLib 2.64. We can reland again when the
implementation is ready.
There are three problems: (a) The glib-networking implementation normally
works, but the test has been broken for a long time. I'm not comfortable
with adding a major new feature without a working test. This is
glib-networking#104. (b) The WebKit implementation never landed. There
is a working patch, but it hasn't been accepted upstream yet. This API
isn't needed in GLib until WebKit is ready to start using it.
https://bugs.webkit.org/show_bug.cgi?id=200805. (c) Similarly, even if
the WebKit API was ready, that itself isn't useful until an application
is ready to start using it, and the Epiphany level work never happened.
Let's try again for GLib 2.66. Reverting this commit now just means we
gain another six months before committing to the API forever. No reason
to keep this in GLib 2.64 when nothing is using it yet.
Since we (optionally) require nanosecond precision for this
(utimes() is used on *nix), use SetFileTime(), which nominally
has 100ns granularity (actual filesystem might be coarser), instead of
g_utime (), which only has 1-second granularity.
Expand our private statbuf structure with st_mtim, st_atim and st_ctim
fields, which are structs that contain tv_sec and tv_nsec fields,
representing a timestamp with 1-second precision (same value as st_mtime, st_atime
and st_ctime) and a fraction of a second (in nanoseconds) that adds nanosecond
precision to the timestamp.
Because FILEETIME only has 100ns precision, this won't be very precise,
but it's better than nothing.
The private _g_win32_filetime_to_unix_time() function is modified
to also return the nanoseconds-remainder along with the seconds timestamp.
The timestamp struct that we're using is named gtimespec to ensure that
it doesn't clash with any existing timespec structs (MinGW-w64 has one,
MSVC doesn't).
This avoids a crash when starting Evolution, and fixes the
network-monitor and network-monitor-race test cases on my developer
workstation. (I assume the CI is not crashing due to lack of network
access there.)
Problem is that if a network already exists in the networks table,
g_hash_table_add() "destroys" (unrefs) it before adding the new one
(which we failed to ref before adding). This means we just accidentally
lost a ref. In practice, the network gets unexpectedly destroyed here
before returning.
Fixes#2020
This complements the `--glib-min-required` argument, just like the
`GLIB_MIN_REQUIRED` and `GLIB_MAX_ALLOWED` preprocessor defines which
control access to APIs in C.
Currently, it doesn’t affect code generation at all. When we next change
code generation, we will need to gate any new API usage on this
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1993
This makes it consistent with the `GLIB_MIN_REQUIRED` defines which are
used for API stability/versioning in C code.
It doesn’t otherwise change the behaviour of the `--glib-min-version`
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1993
Rather than using an array, which requires a lot of iteration over it to
check whether a particular network is present. Using a hash table only
requires iteration in the can_reach() case, where we need to match a
mask in the networks array, rather than equal it.
This should improve performance for large numbers of routes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1925
