This makes the Meson build code for it a little more generic, and adds
support for installed tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While this was useful for local testing while developing the test, it’s
not widely applicable. Look the binary up in the current `${PATH}` if
it’s not specified using `G_TEST_BUILDDIR`.
This is needed to get the `mkenums.py` test working as an
installed-test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
We already have the GType with which the GValue should be initialized,
so requiring an initialized GValue is not really necessary, and it
actually complicates code that wraps GObject, by requiring the retrieval
of the GParamSpec in order to get the property type. Additionally, it
introduces a mostly unnecessary g_value_reset().
We already changed g_object_getv() to allow passing uninitialized
GValues, but this fell through the cracks.
Closes: #737
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
The threads used to iterate at least 10000 times before setting the
"seen thread" flag to true. After porting they inadvertently did that
in the first iteration.
Previously, the test assumed that thread1 and thread2 would be scheduled
enough to set seen_thread{1,2} by the fact that the test runs for a high
number of iterations. On some platforms/schedulers, that’s not true,
which causes the test to spuriously fail.
Fix that by forcing the test to continue iterating until both threads
are seen. If this takes too long, the Meson test runner timeout will be
hit and the test will be terminated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, all three threads would access several global variables
without locking.
Fix that by using atomic accesses to data stored within the
test_closure_refcount() function, which also eliminates the global state
(which would confuse further tests if they were added to this file).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out if G_DISABLE_ASSERT is defined; and
g_assert_*() provide more specific error messages on failure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These functions are not run more than once, so the variables don’t need
to be static to save state between runs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Add tests using an object declared with G_DECLARE_FINAL_TYPE, that is derived
from another, declared using G_DECLARE_DERIVABLE_TYPE, and that
thus uses _GLIB_DEFINE_AUTOPTR_CHAINUP to define cleanup functions.
And verify that both g_autoptr(Type) and g_auto(s)list(Type) work
This makes it easier to debug test failures, by ensuring that g_debug()
and g_test_message() are printed as TAP diagnostics.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1528
Signed-off-by: Simon McVittie <smcv@collabora.com>
g_object_bind_property() (transfer none) returns a GBinding with an existing internal
reference which is active as long as the "binding" is. This allows to optionally use
the binding without any memory management, as it will remove itself when it is no longer
needed.
There are currently three ways to remove the "binding" and as a result the reference:
1) Either the source or target dies and we get notified by a weakref callback
2) The user unrefs the binding until it is destroyed (which is semi-legal,
but worked and is used in the test suite)
3) The user calls g_binding_unbind()
In case (3) the problem was that it always calls unref even if the "binding" is already
gone, leading to crashes when called from bindings multiple times.
In #1373 and !197 it was noticed that a function always unrefs which would be a
"transfer full" annotation, but the problem here is that it should only remove the
ref when removing the "binding" and the annotation should stay "transfer none".
As a side effect of this fix it is now also possible to call g_binding_unbind() multiple
times where every call after the first is a no-op.
This also adds explicit tests for case (1) and (3) - only case (3) is affected by this change.
Part of runMkenumsWithHeader() was duplicated in test_reproducible(),
and would otherwise need to be duplicated again in upcoming tests. Many
places duplicated decoding stdout/stderr and checking the exit code.
Introduce a named tuple for the returned fields; and factor out writing
a template file to pass with --template.
The new python module, added with 0.46, works with Python 2 and 3 and
allows to pass a path for the interpreter to use, if the need arises.
Previously the meson build set PYTHON, used in the shebang line of
the scripts installed by glib, to the full path of the interpreter.
The new meson module doesn't expose that atm, but we should set it to
a executable name anyway, and not a full path.
The implementation is silently discarding this anyway, and
g_object_unref() is using atomic operations. So this should be safe.
Having this here triggers -Wdiscarded-qualifiers when g_clear_pointer()
is fixed to use __typeof__().
The implementation is silently discarding this anyway, and
g_object_unref() is using atomic operations. So this should be safe.
Having this here triggers -Wdiscarded-qualifiers when g_clear_pointer()
is fixed to use __typeof__().
Switch the check which tests whether the object has been finalised from
being a use-after-free, to using a weak pointer which is nullified on
finalisation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It's been 4 years and 8 development cycles since we introduced
G_ADD_PRIVATE and offset-based private data access. It is now
time to finally deprecate the old mechanism.
Closes: #699
Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
The timer tests expect that a small value for sleep does not result in
no sleep at all. Round up to the next millisecond to bring it more in line
with other platforms.
This fixes the glib/timer tests.
This makes the 'threadtests' time out since that uses small usleeps a lot and
until now didn't wait at all, but now always waits a msec. Reduce the amount
of tests done on Windows to get the runtime down to something reasonable again.
https://bugzilla.gnome.org/show_bug.cgi?id=795569
Weak-pointers are currently lacking g_set_object() & g_clear_object()
helpers equivalent. New functions (and macros, both are provided) are
convenient in many case, especially for the property's notify-on-set
pattern:
if (g_set_weak_pointer (...))
g_object_notify (...)
Inspired by Christian Hergert's original implementation for
gnome-builder.
https://bugzilla.gnome.org/show_bug.cgi?id=749527
