Currently, there is no way to prevent tests from building using meson.
When cross-compiling, building the tests isn't necessary.
Instead, only build the tests on the following conditions:
1) If not cross-compiling.
2) If cross-compiling, and there is an exe wrapper.
This reverts commit 80fcb1bc26.
G_DISABLE_DEPRECATED should never be used by anybody, least of all by
GLib. We have deprecation annotations for the compiler, these days, and
they are much better suited than a macro that makes symbols appear and
disappear. The fact that gtk-doc doesn't understand the deprecation
annotations is a limitation of gtk-doc, and it's gtk-doc that ought to be
fixed.
Commit 80fcb1bc broke GStreamer, which disables old API that was
deprecated before the introduction of the deprecation annotations, but
still uses newly deprecated one, and relies on the deprecation
annotations to do their thing. It also broke libsoup, as it uses
GValueArray in its own API.
This is not new; all of its methods have been deprecated for a long
time. Make the deprecation more obvious, however, by marking the whole
section as deprecated.
Note that GArray can’t *quite* do everything that GValueArray could.
See #1069 for work to fix this. This documentation block can be updated
again once that’s fixed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As pointed out by gtk-doc, these are all symbols which have been marked
as deprecated, but which aren’t protected by a deprecation guard. We
can’t use G_DEPRECATED_IN_* for them, as they are all non-function
symbols. Instead, wrap them in #ifndef G_DISABLE_DEPRECATED.
In some cases, we also need to wrap one or two functions which use the
deprecated types in G_DISABLE_DEPRECATED too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
g_object_set_data() should only ever be used with a small, bounded set
of keys, or the memory usage of the quark lookup table will grow
unbounded. Document that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #682
Grouping things together makes them easier to find and keep up to date.
This doesn’t modify any of the comments or make any functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
They were originally generated by glib-genmarshal, which documents its
output as being under the same license as the containing project. In
this case, that’s LGPL.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The threads used to iterate at least 10000 times before setting the
"seen thread" flag to true. After porting they inadvertently did that
in the first iteration.
Previously, the test assumed that thread1 and thread2 would be scheduled
enough to set seen_thread{1,2} by the fact that the test runs for a high
number of iterations. On some platforms/schedulers, that’s not true,
which causes the test to spuriously fail.
Fix that by forcing the test to continue iterating until both threads
are seen. If this takes too long, the Meson test runner timeout will be
hit and the test will be terminated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, all three threads would access several global variables
without locking.
Fix that by using atomic accesses to data stored within the
test_closure_refcount() function, which also eliminates the global state
(which would confuse further tests if they were added to this file).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out if G_DISABLE_ASSERT is defined; and
g_assert_*() provide more specific error messages on failure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These functions are not run more than once, so the variables don’t need
to be static to save state between runs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
GValue g_type field is used for synchronization with g_once_init_enter,
and so it should be written to only with g_once_init_leave.
Replace structure copy with memcpy that copies the one remaining field
of GValue, i.e., data array.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
I'm trying to use `-fsanitize=thread` for OSTree, and some of
these issues seem to go into GLib. Also, the sanitizers work better if
the userspace libraries are built with them too.
This fix is similar to
b6814bb37c
Mixing atomic and non-atomic reads trips TSAN, so let's change the
assertions to operate on the local values returned from atomic
read/writes.
Without this change I couldn't even *build* GLib with TSAN, since we
use gresources during compilation, which uses GSubprocess, which hits
this code.
(Minor review fixes made by Philip Withnall <withnall@endlessm.com>.)
https://gitlab.gnome.org/GNOME/glib/issues/1224
This is an analogous commit to c1f5e528. The original fix only touched
gtype.h and not gtypemodule.h.
The *_init() functions have prototypes incompatible with *InitFunc types they
are being cast to. This upsets GCC 8's -Wcast-function-type that's enabled by
default with -Wextra.
Let's not have the public header files emit a warning and neutralize it by
doing a void(*)(void) cast first.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1666
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
And mention why it’s not a GInterfaceInitFunc as people who have read
the GObject docs cover-to-cover might expect.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Note that it's not reported with gcc. It's only reported with g++.
C++ code to reproduce this warning:
#include <glib-object.h>
G_BEGIN_DECLS
#define GARROW_TYPE_FILE (garrow_file_get_type())
G_DECLARE_INTERFACE(GArrowFile,
garrow_file,
GARROW,
FILE,
GObject)
struct _GArrowFileInterface {
GTypeInterface g_iface;
};
G_DEFINE_INTERFACE(GArrowFile,
garrow_file,
G_TYPE_OBJECT)
static void
garrow_file_default_init(GArrowFileInterface *iface)
{
}
G_END_DECLS
Build command line:
% g++ -Wall -shared -o liba.so a.cpp $(pkg-config --cflags --libs gobject-2.0)
Message:
In file included from /tmp/local.glib/include/glib-2.0/gobject/gobject.h:24,
from /tmp/local.glib/include/glib-2.0/gobject/gbinding.h:29,
from /tmp/local.glib/include/glib-2.0/glib-object.h:23,
from a.cpp:1:
a.cpp: In function 'GType garrow_file_get_type()':
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:219:50: warning: '<<' in boolean context, did you mean '<' ? [-Wint-in-bool-context]
#define G_TYPE_MAKE_FUNDAMENTAL(x) ((GType) ((x) << G_TYPE_FUNDAMENTAL_SHIFT))
~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:2026:11: note: in definition of macro '_G_DEFINE_INTERFACE_EXTENDED_BEGIN'
if (TYPE_PREREQ) \
^~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:1758:47: note: in expansion of macro 'G_DEFINE_INTERFACE_WITH_CODE'
#define G_DEFINE_INTERFACE(TN, t_n, T_P) G_DEFINE_INTERFACE_WITH_CODE(TN, t_n, T_P, ;)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
a.cpp:16:1: note: in expansion of macro 'G_DEFINE_INTERFACE'
G_DEFINE_INTERFACE(GArrowFile,
^~~~~~~~~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:178:25: note: in expansion of macro 'G_TYPE_MAKE_FUNDAMENTAL'
#define G_TYPE_OBJECT G_TYPE_MAKE_FUNDAMENTAL (20)
^~~~~~~~~~~~~~~~~~~~~~~
a.cpp:18:20: note: in expansion of macro 'G_TYPE_OBJECT'
G_TYPE_OBJECT)
^~~~~~~~~~~~~
Conceptually the binding is kept alive as long as both the source and
target exist. This means that an API user needs to take some care to
either hold a reference or only use a pointer to the binding as long as
also holding references to both objects.
Clarify the documentation a bit.
Turns out the fix in commit 93555577c wasn't enough, when using glib as
subproject and the parent project uses only libgio_dep, and include
<gi18n.h>, it won't find libintl.h because it's in the
include_directories of libglib_dep. Fix that by declaring dependencies
explicitly, which is the right thing to do since glib and gobject are
public dependencies of gio. That reflects what we do for the pkg-config
file as well.
When passing a function to G_IMPLEMENT_INTERFACE, it actually has to
take two arguments. Who knew?
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When using glib as subproject we are forced to pass glib_dep,
gobject_dep and gio_dep to any build target. If we pass only gio_dep it
will missing include directory for glib and gobject.
Add tests using an object declared with G_DECLARE_FINAL_TYPE, that is derived
from another, declared using G_DECLARE_DERIVABLE_TYPE, and that
thus uses _GLIB_DEFINE_AUTOPTR_CHAINUP to define cleanup functions.
And verify that both g_autoptr(Type) and g_auto(s)list(Type) work
