In commit 8ff5668, we are subscribing the GSettings backend later, but this
meant that we need to initialize cache_lock earlier, as we might try to
use that lock before a change notification is issued to subscribe the
backend, which would then cause an access violation if we are trying to
read GSettings values, as that lock is used to access the Windows Registry.
Initialize cache_lock once we initialize the GSettings Registry backend,
and delete it upon finalize, so that g_settings_read_from_backend() can
proceed normally, even if the GSettings backend is not yet subscribed.
https://bugzilla.gnome.org/show_bug.cgi?id=740413
GSettings objects begin watching for changes as soon as they are created
in order that they can emit the "changed" signal.
In the case of dconf, if we want to be able to emit the changed signal,
we need to go on the bus and add some match rules. This requires
creating the dconf helper thread and also requires initialising GDBus
(which creates another thread).
Some users of GSettings are never interested in the "changed" signal.
One of these users is the glib-networking code that gets run every time
a new network connection is created.
Some users are reporting that they are annoyed that simply establishing
a network connection would spawn two extra threads and create a D-Bus
connection.
In order to avoid doing unnecessary work for these simple uses, delay
the subscription until we know that we will actually need to do it.
We do this in a simple way, using a simple argument: in order for the
user to care that a value changed then they must have:
1) watched for a change signal; and then
2) actually read a value
If the user didn't actually read a value then they cannot possibly be
interested in if the value changed or not (since they never knew the old
value to begin with and therefore would be unable to observe that it
ever changed, since they have nothing to compare the new value with).
This really is a behaviour change, however, and it does impact at least
one user: the 'monitor' functionality of the GSettings commandline tool,
which is interested in reporting changes without ever having known the
original values. We add a workaround to the commandline tool in order
to ensure that it continues to function properly.
It's also possible to argue that it is completely valid to have read a
value and _then_ established a change signal connection under the
(correct) assumption that it would not have been possible to miss a
change signal by virtue of not having returned to the mainloop.
Although this argument is true, this pattern is extremely non-idiomatic,
and the problem is easily avoided by doing things in the usual order.
We never really talked about change notification in the overview
documentation for GSettings, so it seems like now is a good time to add
some discussion, including the new rules for when one can expect change
signals to be emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=733791
This should already work according to the documentation, but doesn't
because main_options is consumed before the check in
g_application_parse_command_line().
Fix by moving the check for main_options up.
https://bugzilla.gnome.org/show_bug.cgi?id=740157
It simplifies a little bit some code that inserts data relative to a
GList location, that might be NULL for the tail of the queue. A NULL
sibling is probably less useful for insert_after(), so it's more for
consistency with insert_before().
https://bugzilla.gnome.org/show_bug.cgi?id=736620
The win32 headers do:
#define interface struct
which is just evil and breaks other code that assumes it can use
"interface" as a variable name. gnetworking.h was supposed to be doing
"#undef interface" after including the win headers, but it did it too
soon, resulting in it getting redefined by a later include. Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=738551
g_tls_certificate_new_from_file() was only loading the complete chain
if it was fully valid, but we only meant to be validating that it
formed an actual chain (since the caller may be planning to ignore
other errors).
https://bugzilla.gnome.org/show_bug.cgi?id=729739
Fix a hang due to overflow by using unsigned numbers and explicitly
checking if the number overflows to zero. This also fixes the previous
logic which assigned an int which may be negative to an unsigned number
resulting in sign extension and strange results.
Use gsize rather than int to allow for large buffers on 64 bit machines.
https://bugzilla.gnome.org/show_bug.cgi?id=727988
Fix a hang due to overflow by using unsigned numbers and explicitly
checking if the number overflows to zero. This also fixes the previous
logic which assigned an int which may be negative to an unsigned number
resulting in sign extension and strange results.
Use gsize rather than int to allow for large streams on 64 bit machines.
https://bugzilla.gnome.org/show_bug.cgi?id=727988
If a given fd is being polled by multiple sources, we used to pass it
multiple times to g_poll(), which is technically illegal (and not
supported by the select()-based fallback implementation of poll() in
gpoll.c), and also made it more likely that we'd exceed the maximum
number of pollfds.
Fix it to merge together "duplicate" GPollFDs. The easiest way to do
this involves re-sorting context->poll_records into fd order rather
than priority order. This means we now have to walk the entire pollrec
list for every g_main_context_query() and g_main_context_poll(),
rather than only walking the list up to the current max_priority.
However, this will only have a noticeable effect if you have tons of
GPollFDs, and we're already too slow in that case anyway because of
other O(n) operations that happen too often. So this shouldn't change
much (and the new poll API will eventually let us be cleverer).
Remove some win32-specific code which did the same thing (but was
O(n^2)).
https://bugzilla.gnome.org/show_bug.cgi?id=11059
There are two consistent interpretations that could be taken for memory
handling of the 'invocation' parameter passed to the method_call() virtual
function of GDBusInterfaceVTable
- A reference is passed (transfer full) to the method_call() virtual function,
and that reference is then passed (transfer full) to the return_value/error
functions on GDBusMethodInvocation.
- An internal reference is retained from the point where method_call() is called
until the return_value/error function is called.
Since the return_value/error functions were already marked (transfer full),
we use the first interpretation, annotate the invocation parameter of
method call as (transfer full) and describe this in the documentation, along
with the idea that you are always supposed to call one of the return_value/error
functions.
See bug 738122 for the leak this caused in GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=738259
Clarify in the documentation that a GSource created with
g_cancellable_source_new() must be explicitly removed from its
GMainContext before the GCancellable can be finalised.
This could be a common way of leaking GCancellables.
https://bugzilla.gnome.org/show_bug.cgi?id=737259
da053e34 broke the tls-certificates test by requiring the backend to
implement g_tls_certificate_verify() (which the test TLS backend
didn't). Add a trivial implementation to make the test pass again;
we'll need something more complicated when we add tests that are
supposed to get errors.
So shortcut it.
I wrote this patch less as a performance optimization and more as a
clarification, so that people looking at the code can be assured of this
invariant.
https://bugzilla.gnome.org/show_bug.cgi?id=738374
These functions are inconsistent with our normal conventions in that
they set an output variable to a specified value, even in the case that
an error is thrown.
Document very clearly that this should be considered exceptional.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Similar to the previous patch, this commit contains a minor violation of
normal API conventions. See the explanation in the previous commit
message.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
Add an asynchronous version of _read_all().
This API is not fully consistent with the normal expectations of a
non-asynchronous version. Consistency between the sync and async version is
probably more important.
The API will still bind correctly, but access to all functionality will
not be available: specifically, in the case of an error, higher level
languages will be unable to determine how many bytes were successfully
read before the error. Most users will probably not want to use this
information anyway, so this is OK -- and if they do need the
information, then they can just write the loop for themselves.
Heavily based on a patch from Ignacio Casal Quinteiro.
https://bugzilla.gnome.org/show_bug.cgi?id=737451
We called getopt() to try to find out of the platform on which we are
running defaults to strict POSIX-style argument handling (ie: flags
following the first filename are considered as further filenames rather
than flags).
This is the default case on BSDs, for example. It is also the case on
GNU systems with the POSIXLY_CORRECT environment variable set.
Unfortunately many of our tools rely on being able to accept commandline
arguments in the non-strict ordering and the code for making these calls
is spread widely (for example in Makefile fragments invoking some of our
build tools).
For this reason we need to revert the getopt() check and only enable
strict POSIX mode in the case that the application explicitly opts into
it using the _set_strict_posix() API.
This also fixs a failure to build on Windows due to missing getopt().
https://bugzilla.gnome.org/show_bug.cgi?id=723160
With this patch it is fine to call g_hash_table_lookup and
g_hash_table_remove from destroy notification functions. Before
this could lead to an infinitie loop if g_hash_table_remove_all
was used.
https://bugzilla.gnome.org/show_bug.cgi?id=695082
Add a "posixly correct" mode to GOption to stop parsing arguments as
soon as the first non-option argument is encountered.
We determine the default value on the basis of duplicating the behaviour
of the system getopt() implementation (which we directly check the
behaviour of at runtime). On GNU systems this allows the user to modify
our behaviour using POSIXLY_CORRECT.
The user can change the value by g_option_context_set_strict_posix(),
which might be useful for some usecases of GOptionContext (as mentioned
in the doc string of this new function).
https://bugzilla.gnome.org/show_bug.cgi?id=723160
Commit e24e89b accidentally ironically introduced a typo when replacing
the code with symbolic contents. Specifically, "Added Associations" was
replaced with "Default Applications" when reading defaults.list, giving
a warning about the file containing a "Default Applications" group.
If this was intended, it should have not been lumped in with a cleanup.
Add GOBJECT_DEBUG=instance-count which enables internal accounting
of the number of instances of each GType, and g_type_get_instance_count()
to retrieve the result.
https://bugzilla.gnome.org/show_bug.cgi?id=354457
g_get_monotonic_time() and g_get_real_time() now always use different
clocks, so we cannot avoid correcting for their offset. Fixes failure
to time out on Mac OS X.
https://bugzilla.gnome.org/show_bug.cgi?id=738197
Internal allocation size (array->alloc) was being kept to 0 when a new
GByteArray was created from an already existing heap-allocated buffer.
Among other things, this was making g_byte_array_set_size() fully clear all
the buffer contents (not just the newly allocated memory) when
G_DEBUG=gc-friendly was being used...
if (G_UNLIKELY (g_mem_gc_friendly))
memset (array->data + array->alloc, 0, want_alloc - array->alloc);
https://bugzilla.gnome.org/show_bug.cgi?id=738170
This patch changes the behavior of the following functions:
g_tls_certificate_new_from_pem
g_tls_certificate_new_from_file
g_tls_certificate_new_from_files
If more than one certificate is found it will try to load the chain.
It is assumed that the chain will be in the right order (top-level
certificate will be the last one in the file). If the chain cannot be
verified, the first certificate in the file will be returned as before.
https://bugzilla.gnome.org/show_bug.cgi?id=729739
