- Update to version 0.11.0+183+suse.3973293:
* multipathd: fix hang during shutdown with queuing maps
(bsc#1238484).
This adds multipathd-queueing.service.
* multipath-tools: make multipathd listen on a pathname socket
(/run/multipathd.socket) besides listening on an abstract socket.
This allows connecting to multipathd from a containerized application
(gh#opensvc/multipath-tools#111). In client mode, applications
linked against libmpathcmd will attempt to connect to the pathname
socket first, and to the abstract socket if this fails.
The MULTIPATH_SOCKET_NAME environment variable can be used to
override the socket name.
* multipathd: trigger uevents for blacklisted paths in reconfigure
(bsc#1236321)
* libmultipath: remove buggy reinstate_paths function (forwarded request 1250441 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1250442
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=170
- Update to version 0.11.0+164+suse.24eeee7
- Reviewed Upstream changes from 0.12 development
* Continued rework of the path checker loop
* multipathd now sets the port_state of Fibre Channel remote ports to
"marginal" for NVMe devices, too (with nvme_core.multipath=N only).
* Make sure maps are reloaded in the path checker loop after detecting an
inconsistent or wrong kernel state (bsc#1236392)
* Make sure udev and systemd notice changes in multipath path state
when devices are added to or removed from multipath maps (bsc#1236321)
* Fix path grouping if a path device is added while offline with group_by_tpg
and group_by_serial path grouping policy
(gh#opensvc/multipath-tools#108, bsc#1236392)
* Fix the problem that `group_by_tpg` might be disabled if one or more
paths were offline during initial configuration (bsc#1236392)
* Fix multipathd crash because of invalid path group index value, for example
if an invalid path device was removed from a map.
(gh#opensvc/multipath-tools#105, bsc#1236392)
- Changes in Upstream 0.11.0 (see also NEWS.md)
* multipathd: set rport port_state to marginal for NVMe devices
* Fixed a memory leak in the nvme foreign library.
* Fixed a problem in the marginal path detection algorithm that could cause
the io error check for a recently failed path to be delayed.
(bsc#1236390)
* multipath-tools: add HPE MSA Gen7 (2070/2072) to hwtable
* multipath-tools: add SCST to hwtable
* Add defaults for SCST and HPE MSA Gen7 to hwtable
* Reduce log level of harmless "map ... doesn't exist" message
(bsc#1236390)
* Fixes for handling empty or incompletely created multipath maps
(bsc#1236390) (forwarded request 1240182 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1240184
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=169
- Reviewed Upstream changes from 0.12 development
* Continued rework of the path checker loop
* multipathd now sets the port_state of Fibre Channel remote ports to
"marginal" for NVMe devices, too (with nvme_core.multipath=N only).
* Make sure maps are reloaded in the path checker loop after detecting an
inconsistent or wrong kernel state (bsc#1236392)
* Make sure udev and systemd notice changes in multipath path state
when devices are added to or removed from multipath maps (bsc#1236321)
* Fix path grouping if a path device is added while offline with group_by_tpg
and group_by_serial path grouping policy
(gh#opensvc/multipath-tools#108, bsc#1236392)
* Fix the problem that `group_by_tpg` might be disabled if one or more
paths were offline during initial configuration (bsc#1236392)
* Fix multipathd crash because of invalid path group index value, for example
if an invalid path device was removed from a map.
(gh#opensvc/multipath-tools#105, bsc#1236392)
- Changes in Upstream 0.11.0 (see also NEWS.md)
* multipathd: set rport port_state to marginal for NVMe devices
* Fixed a memory leak in the nvme foreign library.
* Fixed a problem in the marginal path detection algorithm that could cause
the io error check for a recently failed path to be delayed.
(bsc#1236390)
* multipath-tools: add HPE MSA Gen7 (2070/2072) to hwtable
* multipath-tools: add SCST to hwtable
* Add defaults for SCST and HPE MSA Gen7 to hwtable
* Reduce log level of harmless "map ... doesn't exist" message
(bsc#1236390)
* Fixes for handling empty or incompletely created multipath maps
(bsc#1236390)
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=351
- Update to version 0.11.0~1+118+suse.4a51b1a
See NEWS.md for details about upstream changes in 0.11.0.
* Pre-release of upstream 0.11.0
* Rework of the path checking algorithm to reduce wait time and improve
performance
* Modified the systemd unit `multipathd.service` such that multipathd will now
restart after a failure or crash (gh#opensvc/multipath-tools#100)
* multipathd: move systemd watchdog handling into daemon (bsc#1232227)
* libmultipath: dm_get_maps(): don't bail out for single-map failures
(bsc#1233588, gh#opensvc/multipath-tools#102)
* libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL
* multipathd: fix deferred_failback_tick for reload removes (forwarded request 1225652 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1225653
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=168
See NEWS.md for details about upstream changes in 0.11.0.
* Pre-release of upstream 0.11.0
* Rework of the path checking algorithm to reduce wait time and improve
performance
* Modified the systemd unit `multipathd.service` such that multipathd will now
restart after a failure or crash (gh#opensvc/multipath-tools#100)
* multipathd: move systemd watchdog handling into daemon (bsc#1232227)
* libmultipath: dm_get_maps(): don't bail out for single-map failures
(bsc#1233588, gh#opensvc/multipath-tools#102)
* libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL
* multipathd: fix deferred_failback_tick for reload removes
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=349
- Update to 0.10.0+103+suse.0fc97cd
- Update to upstream 0.10.0 (see also NEWS.md)
* The `multipathd show daemon` command now shows `(reconfigure pending)`
if a reconfiguration has been triggered but not finished yet.
* Refactored the path checker loop. Paths are now checked for each multipath
map in turn
* Renamed public functions, variables, and macros to comply with the glibc policy
for reserved names (gh#opensvc/multipath-tools#91)
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8). (bsc#1229898)
* Fixed failure to remove maps even with `deferred_remove` (bug introduced in
0.9.9). (bsc#1229898)
* Fixed old mpathpersist bug leading to the error message "configured reservation
key doesn't match: 0x0" when `reservation_key` was configured in the
multipaths section of `multipath.conf`. (bsc#1228926, gh#opensvc/multipath-tools#92)
* Fixed output of `multipath -t` and `multipath -T` for the options
`force_sync` and `retrigger_tries`. (bsc#1229898, gh#opensvc/multipath-tools#88)
* Fixed adding maps by WWID in CLI (command `add map $WWID`). (bsc#1229898)
(bug introduced in 0.9.8). (bsc#1229898)
(bug introduced in 0.9.9). (bsc#1229898) (forwarded request 1197366 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1197370
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=166
- Update to upstream 0.10.0 (see also NEWS.md)
* The `multipathd show daemon` command now shows `(reconfigure pending)`
if a reconfiguration has been triggered but not finished yet.
* Refactored the path checker loop. Paths are now checked for each multipath
map in turn
* Renamed public functions, variables, and macros to comply with the glibc policy
for reserved names (gh#opensvc/multipath-tools#91)
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8). (bsc#1229898)
* Fixed failure to remove maps even with `deferred_remove` (bug introduced in
0.9.9). (bsc#1229898)
* Fixed old mpathpersist bug leading to the error message "configured reservation
key doesn't match: 0x0" when `reservation_key` was configured in the
multipaths section of `multipath.conf`. (bsc#1228926, gh#opensvc/multipath-tools#92)
* Fixed output of `multipath -t` and `multipath -T` for the options
`force_sync` and `retrigger_tries`. (bsc#1229898, gh#opensvc/multipath-tools#88)
* Fixed adding maps by WWID in CLI (command `add map $WWID`). (bsc#1229898)
(bug introduced in 0.9.8). (bsc#1229898)
(bug introduced in 0.9.9). (bsc#1229898)
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=344
- Update to version 0.9.9+161+suse.0c835ef:
* Update to upstream reviewed code path (787e00d)
* Added hardware defaults for Huawei storage arrays and XSG1 vendors
* Refactored and improved the libultipath / libdevmapper interface
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8).
* Fixed failure to remove maps even with `deferred_remove`
(bug introduced in 0.9.9).
* CI improvements
* Documentation fixes (forwarded request 1188706 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1188707
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=165
* Update to upstream reviewed code path (787e00d)
* Added hardware defaults for Huawei storage arrays and XSG1 vendors
* Refactored and improved the libultipath / libdevmapper interface
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8).
* Fixed failure to remove maps even with `deferred_remove`
(bug introduced in 0.9.9).
* CI improvements
* Documentation fixes
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=342
* Fix unit tests on Tumbleweed/armv7l
- Update to 0.9.9 upstream (see NEWS.md for details)
* Update udev rules to be compliant with device-mapper udev
rules update in LVM2 >= 2.03.24.
* Limit real-time scheduling priority to 10 by default. This
can now be configured in multipathd.service using "LimitRTPRIO="
* Set max_sectors_kb only on map creation, or when a new path
is added, to avoid IO errors
* The configuration option "flush_on_last_del" now takes the
values "always" (="yes"), "unused" (="no"), and "never". "yes"
and "no" are still supported
* Add wildcard %k for max_sectors_kb for CLI commands like
"multipath show {paths,maps} format"
* Accept WWID value in CLI commands that take a map name, like
"resize map $map"
* Removed support for CLI wildcards for pathgroups, which were
not function anyway.
* Fix map failure count for no_path_retry > 0
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=339
- Update to version 0.9.8~1+82+suse.dcd98a3:
* Adapt package version such that it shows as a 0.9.8 prerelease
* Add missing udev rules file
- Update to version 0.9.7+148+suse.9780ae0:
* 11-dm-mpath.rules: Fix quoting mistake (bsc#1219142)
- Update to version 0.9.7+148+suse.7d9953e.obscpio
* This is a multipath-tools 0.9.8 pre-release
* fix fast_io_fail for Infinibox (bsc#1219348)
* Fix activation of LVM volume groups during coldplug (bsc#1219142)
- Update to version 0.9.7+140+suse.2d78457:
* This is a multipath-tools 0.9.8 pre-release
* Socket activation via multipathd.socket has been disabled by default
because it has undesirable side effects on systems without multipath.
Users with multipath hardware should enable multipathd.service
* The restorequeueing CLI command now only enables queueing if
disablequeueing had been sent before
* Avoid multipathd hang during map flush
* multipathd now tracks the queueing mode of maps in its internal features string
* Improve error messages in 'multipathd -k'
* Fix segfault in autoresize code (bsc#1219289)
* Fix missing map reloads (bsc#1219796)
* Documentation fixes, spelling fixes, minor code fixes
OBS-URL: https://build.opensuse.org/request/show/1146796
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=160
An upstream PR for 0.9.8 is currently in preparation
(https://github.com/opensvc/multipath-tools/pull/81)
Some minor review is still missing before it can be merged upstream.
We need the included fixes as bug fixes for SLE15-SP6. Will update
to 0.9.8 asap when it's released; no relevant changes between 0.9.8
and this code base are expected.
- Update to version 0.9.7+148+suse.7d9953e.obscpio
* This is a multipath-tools 0.9.8 pre-release
* fix fast_io_fail for Infinibox (bsc#1219348)
* Fix activation of LVM volume groups during coldplug (bsc#1219143)
- Update to version 0.9.7+140+suse.2d78457:
* This is a multipath-tools 0.9.8 pre-release
* Socket activation via multipathd.socket has been disabled by default
because it has undesirable side effects on systems without multipath.
Users with multipath hardware should enable multipathd.service
* The restorequeueing CLI command now only enables queueing if
disablequeueing had been sent before
* Avoid multipathd hang during map flush
* multipathd now tracks the queueing mode of maps in its internal features string
* Improve error messages in 'multipathd -k'
* Fix segfault in autoresize code (bsc#1219289)
* Fix missing map reloads (bsc#1219796)
* Documentation fixes, spelling fixes, minor code fixes
OBS-URL: https://build.opensuse.org/request/show/1146255
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=326
- Update to version 0.9.7+93+suse.e2f2272:
* fix ANA prioritizer enablement logic (bsc#1218326)
* avoid setting queue_if_no_path on multipath maps for which the
no_path_retry timeout has expired
* the interactive commands "restorequeueing map X" and
"restorequeing maps" now only affect maps that had queueing
manually disabled using "disablequeuing maps" or
"disablequeuing map X" beforehand
* Spelling fixes (forwarded request 1137069 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1137070
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=159
- Update to version 0.9.7+93+suse.e2f2272:
* fix ANA prioritizer enablement logic (bsc#1218326)
* avoid setting queue_if_no_path on multipath maps for which the
no_path_retry timeout has expired
* the interactive commands "restorequeueing map X" and
"restorequeing maps" now only affect maps that had queueing
manually disabled using "disablequeuing maps" or
"disablequeuing map X" beforehand
* Spelling fixes
OBS-URL: https://build.opensuse.org/request/show/1137069
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=324
- Update to version 0.9.7+76+suse.5f857af:
* Update to upstream 0.9.7 (jsc#PED-6464)
* added max_retries config option to limit SCSI retries
* added auto_resize config option to enable resizing multipath maps automatically
* fixed memory and error handling for code using aio (marginal path code,
directio path checker)
* dropped modules-load.d/multipath.conf; replaced by a dependency on
modprobe@dm-multipath.service (systemd >= 245: SLE15-SP3 and later only)
and a softdep on sd_mod for the SCSI device handlers
(bsc#1217377)
* On SLE/Leap suse-module-tools doesn't ship a scsi_mod->sd_mod softdep yet.
Add it here, too. It will be overridden by s-m-t when it's added there.
* drop usr_prefix= setting in SLE build recipes (set to /usr by upstream
automatically) (forwarded request 1128106 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1128122
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=158
- Update to version 0.9.7+76+suse.5f857af:
* Update to upstream 0.9.7 (jsc#PED-6464)
* added max_retries config option to limit SCSI retries
* added auto_resize config option to enable resizing multipath maps automatically
* fixed memory and error handling for code using aio (marginal path code,
directio path checker)
* dropped modules-load.d/multipath.conf; replaced by a dependency on
modprobe@dm-multipath.service (systemd >= 245: SLE15-SP3 and later only)
and a softdep on sd_mod for the SCSI device handlers
(bsc#1217377)
* On SLE/Leap suse-module-tools doesn't ship a scsi_mod->sd_mod softdep yet.
Add it here, too. It will be overridden by s-m-t when it's added there.
* drop usr_prefix= setting in SLE build recipes (set to /usr by upstream
automatically)
OBS-URL: https://build.opensuse.org/request/show/1128106
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=322
- Update to version 0.9.6+115+suse.07776fb
* multipathd: Added support to handle FPIN-Li events for FC-NVMe
- Update to version 0.9.6+110+suse.5dfdf35:
* The options "bindings_file", "prkeys_file", and "wwids_file",
which have been deprecated since multipath-tools 0.8.8,
aren't supported any more. The paths to these files are now
hard-coded to "bindings", "prkeys" and "wwids" under
/etc/multipath.
* Strictly avoid assigning map aliases that are already taken
(bsc#1213265)
* Improve handling of user-friendly names
* avoid "multipath -d" (dry-run) changing SCSI timeouts in sysfs
(bsc#1213809)
- spec file:
* adapt prefix values to upstream changes
* fix compilation flags for "make check"
* pass EXTRAVERSION to build (forwarded request 1120227 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1120229
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=156
- Update to version 0.9.6+115+suse.07776fb
* multipathd: Added support to handle FPIN-Li events for FC-NVMe
- Update to version 0.9.6+110+suse.5dfdf35:
* The options "bindings_file", "prkeys_file", and "wwids_file",
which have been deprecated since multipath-tools 0.8.8,
aren't supported any more. The paths to these files are now
hard-coded to "bindings", "prkeys" and "wwids" under
/etc/multipath.
* Strictly avoid assigning map aliases that are already taken
(bsc#1213265)
* Improve handling of user-friendly names
* avoid "multipath -d" (dry-run) changing SCSI timeouts in sysfs
(bsc#1213809)
- spec file:
* adapt prefix values to upstream changes
* fix compilation flags for "make check"
* pass EXTRAVERSION to build
OBS-URL: https://build.opensuse.org/request/show/1120227
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=318
- Update to version 0.9.6+71+suse.525c32f:
* avoid changing SCSI timeouts in "multipath -d" (bsc#1213809)
- Update to version 0.9.6+70+suse.63925e8:
Upstream feature additions and bug fixes:
* ignore nvme devices by default if nvme native multipath is enabled
* add "group_by_tpg" path_grouping_policy
* add config options "detect_pgpolicy" and "detect_pgpolicy_use_tpg"
* libmultipath: add ALUA tpg path wildcard "%A"
* make prioritizer timeouts consistent with checker timeouts
* fix dev_loss_tmo even if not set in configuration (bsc#1212440)
* libmultipath: fix max_sectors_kb on adding path
* fix warnings reported by udevadm verify
OBS-URL: https://build.opensuse.org/request/show/1109325
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=313
- Update to version 0.9.4+79+suse.25c23a9:
* fix multipath-tools build with liburcu 0.14.0
- Upstream bug fixes:
* libmultipath: return 'pending' state when port is in transition
* multipath.rules: fix "smart" bug with failed valid path check
* libmpathpersist: fix resource leak in update_map_pr()
* libmultipath: keep renames from stopping other multipath actions (forwarded request 1072176 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1072177
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=151
- Update to version 0.9.4+68+suse.98559ea:
* libmultipath: bump ABI version to 18.0.0
* libmultipath: pathinfo: don't fail for devices lacking INQUIRY properties
(gh#opensvc/multipath-tools#56)
* libmpathpersist: use conf->timeout for updating persistent reservations
(gh#opensvc/multipath-tools#45)
* libmultipath: is_path_valid(): check if device is in use
(bsc#1203141) (added libmount dependency)
* libmultipath: orphan paths if coalesce_paths frees newmp (bsc#1207546)
* multipathd: handle no active paths in update_map_pr (bsc#1207546)
* multipathd: make pr registration consistent (bsc#1207546)
* libmultipath: don't leak memory on invalid strings (bsc#1207546)
* multipath.conf(5): improve documentation of dev_loss_tmo (bsc#1207546)
* libmpathpersist: fix command keyword ordering (bsc#1207546)
* libmultipath: fix 'show paths format' failure
* minor bugfixes
* hwtable fixes
* Build system rework
* spec file: adapt make command line to changes in build system
* spec file: use make -Orecurse (better readable output)
* spec file: use verbose build (forwarded request 1060999 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/1061002
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=150
- Update to version 0.9.4+68+suse.98559ea:
* libmultipath: bump ABI version to 18.0.0
* libmultipath: pathinfo: don't fail for devices lacking INQUIRY properties
(gh#opensvc/multipath-tools#56)
* libmpathpersist: use conf->timeout for updating persistent reservations
(gh#opensvc/multipath-tools#45)
* libmultipath: is_path_valid(): check if device is in use
(bsc#1203141) (added libmount dependency)
* libmultipath: orphan paths if coalesce_paths frees newmp (bsc#1207546)
* multipathd: handle no active paths in update_map_pr (bsc#1207546)
* multipathd: make pr registration consistent (bsc#1207546)
* libmultipath: don't leak memory on invalid strings (bsc#1207546)
* multipath.conf(5): improve documentation of dev_loss_tmo (bsc#1207546)
* libmpathpersist: fix command keyword ordering (bsc#1207546)
* libmultipath: fix 'show paths format' failure
* minor bugfixes
* hwtable fixes
* Build system rework
* spec file: adapt make command line to changes in build system
* spec file: use make -Orecurse (better readable output)
* spec file: use verbose build
OBS-URL: https://build.opensuse.org/request/show/1060999
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=304
- Update to version 0.9.1+48+suse.9c6c435:
* Upstream version update
* kpartx_id: remove bashism
* Doc: add multipathc.8 manual page
- Update to version 0.9.0+134+suse.dbf2e2d:
* Add multipathc command under GPL3.0, and split off libmpathutil
(bsc#1202616)
* Fix command completion in interactive mode (bsc#1201483)
* multipathd: fix use-after-free in handle_path_wwid_change()
(bsc#1201483)
* Improve startup time for very large multipath.conf (bsc#1200523)
* Avoid checker blocking event handling for huge number of devices
(boo#1203085)
* Cleanup sysfs accessors in libmultipath
* Minor upstream bug fixes
* Spelling fixes
* Documentation: add ALUA info to README.md, delete README.alua
OBS-URL: https://build.opensuse.org/request/show/1001779
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=291
Fix revision in _service file
- Update to version 0.9.0+39+suse.51a2ab1:
Upstream bug fixes:
* libmultipath: fix find_multipaths_timeout for unknown hardware
(boo#1201483)
* multipath-tools: fix "multipath -ll" for Native NVME Multipath devices
(boo#1201483)
- Update to version 0.9.0+33+suse.fdc6686
* multipath.conf: add support for "protocol" subsection in
"overrides" section to set certain config options by protocol.
* Removed the previously deprecated options getuid_callout,
config_dir, multipath_dir, pg_timeout
* hwable fixes and additions
* multipath.conf(5): add disclaimer about vendor support
* libmultipath, kpartx: fix callers of dm_get_next_target()
* Change built-in defaults for NVMe: group by prio, and immediate
failback
* Allow compilation with -D_FORTIFY_SOURCE=3
OBS-URL: https://build.opensuse.org/request/show/989504
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=143
Added changelog entries
- Update to version 0.9.0+33+suse.fdc6686
* multipath.conf: add support for "protocol" subsection in
"overrides" section to set certain config options by protocol.
* Removed the previously deprecated options getuid_callout,
config_dir, multipath_dir, pg_timeout
* Change built-in defaults for NVMe: group by prio, and immediate
failback
* Allow compilation with -D_FORTIFY_SOURCE=3
OBS-URL: https://build.opensuse.org/request/show/989269
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=286
- Update to version 0.8.9+90+suse.71a70fb:
* support overriding -D_FORTIFY_SOURCE in OPTFLAGS
* add -U_FORTIFY_SOURCE to optflags to avoid compilation errors
on old distros
- Update to version 0.8.9+87+suse.a1eb122:
* add ability to autodetect support for -D_FORTIFY_SOURCE=3
- Update to version 0.8.9+85+suse.a9da21c:
* This is a pre-release of multipath-tools 0.9.0
* multipath.conf: add "protocol" subsection in "overrides" section
This allows to set "dev_loss_tmo", "fast_io_fail_tmo", and
"eh_deadline" on a per-protocol basis rather than per storage
* multipath.conf: drop support for deprecated options:
getuid_callout, pg_timeout, config_dir, multipath_dir
* multipathd: don't switch to DAEMON_IDLE during startup
(bsc#1199346, bsc#1197570)
* multipathd: avoid delays during uevent processing (bsc#1199347)
* Fixes for minor issues reported by coverity
* Fix for memory leak with uid_attrs
* Fix possibility to redefine -D_FORTIFY_SOURCE macro.
* Updates for built in hardware db
- Update to version 0.8.9+42+suse.45974f11:
* Logging improvements
* Fix busy loop with delayed_reconfigure (bsc#1199342)
* multipathd: use remove_map_callback for delayed reconfigure
* multipathd: Don't keep starting TUR threads, if they always hang.
(bsc#1199345)
* Fix handling of path addition in read-only arrays on NVMe
OBS-URL: https://build.opensuse.org/request/show/976432
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=142
- Update to version 0.8.9+87+suse.a1eb122:
* add ability to autodetect support for -D_FORTIFY_SOURCE=3
- Update to version 0.8.9+85+suse.a9da21c:
* This is a pre-release of multipath-tools 0.9.0
* multipath.conf: add "protocol" subsection in "overrides" section
This allows to set "dev_loss_tmo", "fast_io_fail_tmo", and
"eh_deadline" on a per-protocol basis rather than per storage
* multipath.conf: drop support for deprecated options:
getuid_callout, pg_timeout, config_dir, multipath_dir
* multipathd: don't switch to DAEMON_IDLE during startup
(bsc#1199346, bsc#1197570)
* multipathd: avoid delays during uevent processing (bsc#1199347)
* Fixes for minor issues reported by coverity
* Fix for memory leak with uid_attrs
* Fix possibility to redefine -D_FORTIFY_SOURCE macro.
* Updates for built in hardware db
- Update to version 0.8.9+42+suse.45974f11:
* Logging improvements
* Fix busy loop with delayed_reconfigure (bsc#1199342)
* multipathd: use remove_map_callback for delayed reconfigure
* multipathd: Don't keep starting TUR threads, if they always hang.
(bsc#1199345)
* Fix handling of path addition in read-only arrays on NVMe
* Updates of built-in hardware database
- Update to upstream 0.8.9
* libmultipath: only warn once about unsupported dev_loss_tmo
* Otherwise code-identical to 0.8.8+64
OBS-URL: https://build.opensuse.org/request/show/976003
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=280
- Version 0.8.8+45+suse.628d603e
* fix handling of historical-service-time path selector (bsc#1195425)
* fix marking multipath devices as failed prematurely on startup
(bsc#1195426)
* multipathd.service: remove LimitCORE=infinity directive
This should only be enabled for debugging.
* multipathd.service: don't load scsi_dh modules (bsc#1195397)
This is done via modules-load.d functionality on (open)SUSE
- Upstream fixes:
* Fix claiming of paths with "find_multipaths strict"
* Avoid unnecessary read-only reloads
OBS-URL: https://build.opensuse.org/request/show/950721
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=138
- Version 0.8.8+45+suse.628d603e
* fix handling of historical-service-time path selector (bsc#1195425)
* fix marking multipath devices as failed prematurely on startup
(bsc#1195426)
* multipathd.service: remove LimitCORE=infinity directive
This should only be enabled for debugging.
* multipathd.service: don't load scsi_dh modules (bsc#1195397)
This is done via modules-load.d functionality on (open)SUSE
- Upstream fixes:
* Fix claiming of paths with "find_multipaths strict"
* Avoid unnecessary read-only reloads
OBS-URL: https://build.opensuse.org/request/show/950712
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=270
- Update to 0.8.8+38+suse.2bdd3a14.obscpio
* upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31
------------------------------------------------------------------
- Drop versioned dependency on libmpath0 again (bsc#1190622)
* Since 0.8.6, libmultipath and libmpathpersist have got proper ABI
versioning, and rpmbuild auto-generates dependencies on
libmultipath.so.0(LIBMULTIPATH_13.0.0) etc.
- Update to version 0.8.7+138+suse.7c9afe31:
New upstream version (pre-0.8.8)
* deprecate "config_dir" and "multipath_dir" config options
(will be removed in future version)
* remove dependency on systemd-udevd-settle.service (boo#1193336)
* fix crash in remove_map (boo#1193334)
* CLI: add path wildcard "%I" for init state
* CLI: add "reconfigure all" command
* allow multiple pending "reconfigure" commands (bsc#1189551)
* speed up "reconfigure" by avoiding unnecessary map reloads
(bsc#1189551)
* rework of CLI command handler (unix socket handler) to avoid
hanging CLI commands (bsc#1189551)
* fix multipathd startup after stop during reconfigure (boo#1193338)
* improve error detection and warning messages in config file parser
* fix exit status of multipath -T (bsc#1191900)
* fix defects reported by coverity (boo#1193342)
- avoid sleeping with locks held
- exit if bindings file is broken
- set umask before mkstemp
- add bounds and consistency checks in SCSI VPD parsing code
OBS-URL: https://build.opensuse.org/request/show/936067
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=136
* libmultipath:fix compilation with glibc 2.34 (bsc#1189099)
* libmultipath: avoid buffer size warning with systemd 240+
(bsc#1189176)
* libmultipath: use uint64_t for sg_id.lun (bsc#1187534)
- Upstream bug fixes:
* multipath-tools: make HUAWEI/XSG1 config work with alua and multibus
* multipath-tools: add info about HPE Alletra 6000 and 9000
* multipathd: cli_getprkey(): fix return value and "aptpl" support
* multipathd: don't rescan_path on wwid change in uev_update_path
* kpartx: Don't leak memory when getblock returns NULL
* multipath: free vectors in configure
* multipathd: fix ev_remove_path return code handling
* multipathd: remove duplicate orphan_paths in flush_map
* multipathd: don't fail to remove path once the map is removed
* multipathd: fix compilation issue with liburcu < 0.8
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=258
- Update to version 0.8.6+10+suse.47711374:
* Github workflows: add CI for SUSE-specific branches
- Disabled LTO for multipath-tools
* The test for is_valid_path fails if LTO is enabled, just
disabling it for %check is insufficient.
- Update to version 0.8.6+9+suse.6c05a61:
Update to upstream 0.8.6.
* add eh_deadline option to avoid endless SCSI error handling
* add wwid_recheck option to detect storage configuration changes
* add library versioning for libmultipath, libmpathpersist etc. and
to libmultipath plugins
* move some global symbols to libmultipath (udev, logsink, etc)
and provide default implementations for get_multipath_config() etc.
This allows simplifiying libmpathpersist_example.c drastically.
* fixes for shutdown issues and various race conditions on exit
* improve cleanup on exit, fix memory leaks
* add libmpathvalid library
* fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
* Avoid access to root FS while queueing IO (bsc#1178049,
bsc#1181234)
* lots of bug fixes, additions to built-in hardware table, and
CI improvements (bsc#1186212)
* kpartx: free loop device after listing partitions (boo#1107187)
Bug fixes on top of 0.8.5 mentioned below are also included in
this upstream version.
(bsc#1182072, bsc#1177371)
(bsc#1181435, bsc#1183666)
OBS-URL: https://build.opensuse.org/request/show/894440
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=131
- Update to version 0.8.6+10+suse.47711374:
* Github workflows: add CI for SUSE-specific branches
- Disabled LTO for multipath-tools
* The test for is_valid_path fails if LTO is enabled, just
disabling it for %check is insufficient.
- Update to version 0.8.6+9+suse.6c05a61:
Update to upstream 0.8.6.
* add eh_deadline option to avoid endless SCSI error handling
* add wwid_recheck option to detect storage configuration changes
* add library versioning for libmultipath, libmpathpersist etc. and
to libmultipath plugins
* move some global symbols to libmultipath (udev, logsink, etc)
and provide default implementations for get_multipath_config() etc.
This allows simplifiying libmpathpersist_example.c drastically.
* fixes for shutdown issues and various race conditions on exit
* improve cleanup on exit, fix memory leaks
* add libmpathvalid library
* fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
* Avoid access to root FS while queueing IO (bsc#1178049,
bsc#1181234)
* lots of bug fixes, additions to built-in hardware table, and
CI improvements (bsc#1186212)
* kpartx: free loop device after listing partitions (boo#1107187)
Bug fixes on top of 0.8.5 mentioned below are also included in
this upstream version.
(bsc#1182072, bsc#1177371)
(bsc#1181435, bsc#1183666)
OBS-URL: https://build.opensuse.org/request/show/894131
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=253
- Update to version 0.8.5+26+suse.2cbedfd:
Avoid "illegal request" errors on non-RDAC storage
(bsc#bsc#1182072, bsc#1177371)
- Update to version 0.8.5+23+suse.c11b054:
* multipath -U: reduce log level of "adding new path" message
(bsc#1181435)
- Update to version 0.8.5+22+suse.e1e3c48:
* multipath-tools tests: fix stringop-overflow build errors with gcc 11
(bsc#1181877)
* README moved to README.md (has been converted to markdown upstream)
- Update to version 0.8.5+12+suse.3b0e9ca
* cleanup disassemble_map() code path (bsc#1178377, bsc#1178379)
(bsc#1182917)
- added one more bug ref (new bug fixed in already present patch)
OBS-URL: https://build.opensuse.org/request/show/878610
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=128
- Update to version 0.8.4+192+suse.1bc10ad:
* Fix handling of hardware properties for maps without paths
(bsc#1176644)
- Update to version 0.8.4+190+suse.fe234ea:
* Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439)
- multipathd: allow shutdown during configure()
* fix compilation of external programs with -lmultipath
(bsc#1133957, necessary after the above fix)
* Minor upstream fixes
OBS-URL: https://build.opensuse.org/request/show/835004
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=230
- Update to version 0.8.4+31+suse.8f53764:
* Fix sporadic build failures caused by missing build dependencies
- Update to version 0.8.4+29+suse.c27ed8d:
* multipath-tools: Makefile.inc: set -Wno-error=clobbered
* Makefile.inc: keep warning flags during rpm build
* Eliminate compiler warnings on 32bit build.
* Fixes for tests under i586
- Spec file: add %check section to run multipath-tools CI
* not on SLE12, as cmocka is missing
* add build dependency on cmocka for building tests
* run "make test" with parallel make
- Update to version 0.8.4+19+suse.48fc2f4:
* multipath: add "-e" option to enable foreign libraries
* libmultipath: set "enable_foreign" to NONE by default
* deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
(included in factory git repo now).
* Makefile: dependency fixes for parallel build
- Get rid of %is_opensuse:
* drop build workaround for Leap 42.1
* build libdmmp for everything except SLE12/Leap42 and older
- Other spec file updates:
* use %make_build to speed up build (possible with 0.8.4)
- Migrated to .obscpio format.
- Update to version 0.8.4+16+suse.f319f7ea
- Changed github workflow back from merge-based to rebase-based.
This makes it much easier to assess differences between upstream
and SUSE code. (forwarded request 803707 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/805306
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=122
- Update to version 0.8.4+31+suse.8f53764:
* Fix sporadic build failures caused by missing build dependencies
- Update to version 0.8.4+29+suse.c27ed8d:
* multipath-tools: Makefile.inc: set -Wno-error=clobbered
* Makefile.inc: keep warning flags during rpm build
* Eliminate compiler warnings on 32bit build.
* Fixes for tests under i586
- Spec file: add %check section to run multipath-tools CI
* not on SLE12, as cmocka is missing
* add build dependency on cmocka for building tests
* run "make test" with parallel make
- Update to version 0.8.4+19+suse.48fc2f4:
* multipath: add "-e" option to enable foreign libraries
* libmultipath: set "enable_foreign" to NONE by default
* deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
(included in factory git repo now).
* Makefile: dependency fixes for parallel build
- Get rid of %is_opensuse:
* drop build workaround for Leap 42.1
* build libdmmp for everything except SLE12/Leap42 and older
- Other spec file updates:
* use %make_build to speed up build (possible with 0.8.4)
- Migrated to .obscpio format.
- Update to version 0.8.4+16+suse.f319f7ea
- Changed github workflow back from merge-based to rebase-based.
This makes it much easier to assess differences between upstream
and SUSE code.
OBS-URL: https://build.opensuse.org/request/show/803707
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=212
- Update to version 0.8.1+28+suse.fea562a:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don't reset prio for
inaccessible paths (bsc#1118495)
- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation
* various minor fixes (coverity)
* libmultipath: hwtable: add Lenovo DE series (bsc#1125507) (forwarded request 711931 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/711933
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=114
- Update to version 0.8.1+28+suse.fea562a:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don't reset prio for
inaccessible paths (bsc#1118495)
- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation
* various minor fixes (coverity)
* libmultipath: hwtable: add Lenovo DE series (bsc#1125507)
OBS-URL: https://build.opensuse.org/request/show/711931
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=195
- Disable kmod() style dependencies again (bsc#1119414)
* For TW, dependencies will be autogenerated
(gh#openSUSE/rpm-config-SUSE#3)
* For SLE, feature is currently rejected (jsc#SLE-3853)
- Update to version 0.8.1+8+suse.8c11498:
* Avoid deadlock situation during udev settle
(bsc#1131789, bsc#1125145)
- multipath -u: test socket connection in non-blocking mode
* Fix priority handling for offline paths
(bsc#1118495)
- Update to upstream 0.8.1
* Avoid device IO in "multipath -u" (bsc#1125145)
* multipathd: protect all access to running_state
(bsc##1110060, bsc#1110439)
* Improve handling of changed WWIDs and temporary failure
to obtain WWID. Option "disable_changed_wwids" is now ignored.
* Fixes for PATH_PENDING state handling (bsc#1125043) (forwarded request 699727 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/699729
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=113
- Disable kmod() style dependencies again (bsc#1119414)
* For TW, dependencies will be autogenerated
(gh#openSUSE/rpm-config-SUSE#3)
* For SLE, feature is currently rejected (jsc#SLE-3853)
- Update to version 0.8.1+8+suse.8c11498:
* Avoid deadlock situation during udev settle
(bsc#1131789, bsc#1125145)
- multipath -u: test socket connection in non-blocking mode
* Fix priority handling for offline paths
(bsc#1118495)
- Update to upstream 0.8.1
* Avoid device IO in "multipath -u" (bsc#1125145)
* multipathd: protect all access to running_state
(bsc##1110060, bsc#1110439)
* Improve handling of changed WWIDs and temporary failure
to obtain WWID. Option "disable_changed_wwids" is now ignored.
* Fixes for PATH_PENDING state handling (bsc#1125043)
OBS-URL: https://build.opensuse.org/request/show/699727
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=193
- Re-enable kmod-style dependencies for multipath-tools package
(bsc#1119414)
- Separate out libmpath0 (bsc#1119414)
- Spec file improvements
* Add Conflicts: for older multipath-tools to libmpath0
* Move license files to the libmpath0 package, which contains the
code with complex licensing. The executables are GPL-2.0 anyway.
* Remove bogus dependency of -devel package on device-mapper
* -devel package depends on libmpath0, not multipath-tools
* Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
(John Vandenberg <jayvdb@gmail.com>)
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from
%pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
- Update to version 0.8.0+17+suse.a28893f:
* Code-identical to 0.7.9+139+suse.ed9d450, except for new
version number
- Disable kmod() style dependencies for now, as they are causing
problems with image builds (bsc#1119414). They'd been active
for SLE15-SP1 only, anyway.
- _service: determine "tag offset" manually, the patch count
determined by git is far too high.
- Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
OBS-URL: https://build.opensuse.org/request/show/693797
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=111
- Re-enable kmod-style dependencies for multipath-tools package
(bsc#1119414)
- Separate out libmpath0 (bsc#1119414)
- Spec file improvements
* Add Conflicts: for older multipath-tools to libmpath0
* Move license files to the libmpath0 package, which contains the
code with complex licensing. The executables are GPL-2.0 anyway.
* Remove bogus dependency of -devel package on device-mapper
* -devel package depends on libmpath0, not multipath-tools
* Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
(John Vandenberg <jayvdb@gmail.com>)
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from
%pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
- Update to version 0.8.0+17+suse.a28893f:
* Code-identical to 0.7.9+139+suse.ed9d450, except for new
version number
- Disable kmod() style dependencies for now, as they are causing
problems with image builds (bsc#1119414). They'd been active
for SLE15-SP1 only, anyway.
- _service: determine "tag offset" manually, the patch count
determined by git is far too high.
- Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
OBS-URL: https://build.opensuse.org/request/show/690443
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=189
- Update to version 0.7.9+139+suse.ed9d450:
* multipath-tools: Build: properly parse systemd's version
- Add kmod(xyz) style dependencies for SLE15-SP1
(jsc#SLE-3853, fate#326579, bsc#1119414)
- Update to version 0.7.9+138+suse.0edd0a2:
- Include reviewed fixes from upstream
* libmutipath: continue to use old state on PATH_PENDING
* libmultipath: disable user_friendly_names for NetApp
* multipath: blacklist zram devices
* various fixes for martinal path code
- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG
(bsc#1127873)
* minor fixes suggested by coverity (bsc#1127879)
OBS-URL: https://build.opensuse.org/request/show/682522
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=110
- Add kmod(xyz) style dependencies for SLE15-SP1
(jsc#SLE-3853, fate#326579)
- Update to version 0.7.9+138+suse.0edd0a2:
- Include reviewed fixes from upstream
* libmutipath: continue to use old state on PATH_PENDING
* libmultipath: disable user_friendly_names for NetApp
* multipath: blacklist zram devices
* various fixes for martinal path code
* minor fixes suggested by coverity
- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG
(bsc#1127873)
OBS-URL: https://build.opensuse.org/request/show/681784
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=182
- Update to version 0.7.9+108+suse.3fd53bf:
* libmultipath: fix compilation with older kernel headers
(bsc#1121066)
- merged upstream fb824725
* Improved NVMe support in both native and dm-mpath mode
added basic NVMe ANA support (bsc#1119898)
* multipathd: fix daemon not really shutdown
(bsc##1110060, bsc#1110439)
- Update to version 0.7.9+90+suse.f81e290:
* libmultipath: Increase SERIAL_SIZE to 128 bytes
(bsc#1107179)
- Update to version 0.7.9+89+suse.df77b66:
- re-enable "san_path_err_xy" options
These have been removed upstream, but they were supported
in SLE-15/Leap15.0, so we can't simply throw them away.
Improve documentation, mark them as deprecated, but keep
the code in place.
OBS-URL: https://build.opensuse.org/request/show/663641
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=173
- Update to version 0.7.9+85+suse.766b95e:
* upstream patch series to make verbosity level 3
less verbose and thus better usable (bsc#1118937)
* fix for handling device size mismatch in coalesce_paths()
(bsc#1037379)
* libmultipath: fix false removes in dmevents polling code
(bsc#1116272)
* Spec file: remove build dependency on dracut which causes
build errors for some distributions
OBS-URL: https://build.opensuse.org/request/show/657556
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=170
- Update to version 0.7.9+58+suse.0790830:
* libmpathpersist: fix off-by-one error in PRIN length check
(bsc#1099007)
* multipathd: fix mpp->hwe handling when paths are freed
(fix possible crash caused by new hardware table code)
- Update to version 0.7.9+55+suse.9fc8439:
(note the "55" is due to former merge operations. We actually
only have 7 patches on top of upstream. All other patches
referenced below as "not upstream" have been merged).
* Bump version to 0.7.9
* multipathd: reset delay_wait_checks counter on failure
(bsc#1114771)
* multipathd: fix irritating "minor number mismatch" message
(bsc#1111116)
* fix posible failure to shut down (bsc#1110060, bsc#1110439)
* upstream "checker overhaul" - cleanups and improvements for
path checkers
* Upstream fixes for failures handling path initializiation
* various small upstream bug fixes.
OBS-URL: https://build.opensuse.org/request/show/652111
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=168
This fixes the problem with the previous submission
(missing Obsoletes: tag)
- Update to version 0.7.7+75+suse.6287aef:
Added minor updates from upstream
* multipath-tools: add info about how to enable ALUA in ONTAP
* multipath-tools: add directio path_checker for DASD devices
* multipath-tools: make Product Name mandatory and add all of them
Minor rebase, as some SUSE patches have been merged upstream
(all mentioned in previous changelogs)
- Update to version 0.7.7+72+suse.4b24466:
* multipath: fix return code handling in delegate_to_multipathd
(bsc#1098177)
* multipath: don't start multipathd unnecessarily
(bsc#1098177)
* added Obsoletes: for multipath-tools-rbd.
* libmultipath: Fix sgio_get_vpd() (bsc#1099484)
OBS-URL: https://build.opensuse.org/request/show/621304
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=164
- Update to version 0.7.7+70+suse.4a5941e:
* libmultipath: change partition_delimiter default to "-part"
(bsc#1073622, bsc#1056526)
* change default for find_multipaths to "greedy" (bsc#1099054)
* libmultipath: allow distributions to change partition_delim default
(bsc#1073622, bsc#1056526)
- Update to version 0.7.7+67+suse.a7d1e14:
- RBD/RADOS backend support has been removed upstream
remove support for it in openSUSE, too (boo#1099037)
- libdmmp version has changed to 0.2.0
- New patches not yet upstream:
* multipathd: fix mpp->hwe handling on path removal (boo#1099028)
* libmultipath: print correct default for delay_*_checks (boo#1099026)
* libmultipath: avoid error messages from RDAC check (bsc#1075539)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
(bsc#1099007)
* multipathd: fix buffer size in cli_getprkey (bsc#1099028)
* libmultipath: fix gcc 8.1 "truncated output" warnings
(bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus
(bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus
(bsc#1099007)
- SUSE specific patches preserved:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
OBS-URL: https://build.opensuse.org/request/show/619018
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=163
- No functional changes, just licenses
- Spec file: fix %license tags and info after closer inspection
(bsc#1088801)
* kpartx is under GPL-2.0-only
* rbd is under LGPL-2.1-only
- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
* Added fossology assessment as README.licenses
* multipath-tools: create LICENSES dir with the text of all used licences
- Update to version 0.7.3+61+suse.d4d0494:
* 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
(bsc#1084748)
OBS-URL: https://build.opensuse.org/request/show/595137
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=159
- Update to version 0.7.3+10+suse.70ccb55b0439:
- Rebase to upstream release 0.7.3
* libmultipath: add pthread_cleanup hook for udev monitor
* libmultipath: pull functions into util.c
* libmultipath: change reservation_key to a be64
* libmpathpersist: fix update_prflag code
* multipath: add alternate reservation_key method
* mpathpersist: add support for prkeys file
* multipath-tools: minor edition and corrections in multipath.conf.5
* multipath-tools: fix incorrect length for strncmp in uevent.c
* multipath-tools: clarify how to dump the multipathd config
* multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
* libmultipath: sanitize fd handling
* multipath-tools: link internal libraries before foreigns
* multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
* multipath-tools: add support for all arrays from Sun StorEdge 3000 family
* multipath-tools: add Xiotech iglu blaze arrays to hwtable
* multipath-tools: add Dot Hill/Seagate arrays to hwtable
* libmultipath: update INFINIDAT builtin config
* multipath-tools: add info about adding new hardware
* multipath-tools: Remove the limitation of IPC command reply length.
* multipath-tools: libdmmp: Improve timeout mechanism
* multipath-tools: libdmmp: New function to flush and reconfig
* Bump version to 0.7.3
- minor fixes for upstream 0.7.3
* libmultipath: ensure checker->fd == -1 if not set
* libmpathpersist: add support for prkeys file v3
* multipath: add man page info for my prkey changes
- Patch series for NVMe discovery and failover (bsc#1038865)
* discovery: sanitize NVMe discovery (forwarded request 528058 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/528059
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=91
- Update to version 0.7.3+10+suse.70ccb55b0439:
- Rebase to upstream release 0.7.3
* libmultipath: add pthread_cleanup hook for udev monitor
* libmultipath: pull functions into util.c
* libmultipath: change reservation_key to a be64
* libmpathpersist: fix update_prflag code
* multipath: add alternate reservation_key method
* mpathpersist: add support for prkeys file
* multipath-tools: minor edition and corrections in multipath.conf.5
* multipath-tools: fix incorrect length for strncmp in uevent.c
* multipath-tools: clarify how to dump the multipathd config
* multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
* libmultipath: sanitize fd handling
* multipath-tools: link internal libraries before foreigns
* multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
* multipath-tools: add support for all arrays from Sun StorEdge 3000 family
* multipath-tools: add Xiotech iglu blaze arrays to hwtable
* multipath-tools: add Dot Hill/Seagate arrays to hwtable
* libmultipath: update INFINIDAT builtin config
* multipath-tools: add info about adding new hardware
* multipath-tools: Remove the limitation of IPC command reply length.
* multipath-tools: libdmmp: Improve timeout mechanism
* multipath-tools: libdmmp: New function to flush and reconfig
* Bump version to 0.7.3
- minor fixes for upstream 0.7.3
* libmultipath: ensure checker->fd == -1 if not set
* libmpathpersist: add support for prkeys file v3
* multipath: add man page info for my prkey changes
- Patch series for NVMe discovery and failover (bsc#1038865)
* discovery: sanitize NVMe discovery
OBS-URL: https://build.opensuse.org/request/show/528058
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=134
- Update to version 0.7.2+44.3a8d750c:
Misc bug fixes:
* multipathd: don't flood system with sd_notify calls (bsc#1056011)
* libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
* libmultipath: add_feature: allow only 1 feature (bsc#1055635)
* multipath: delegate dangerous commands to multipathd (bsc#1047639)
* libmultipath: fix partition_delimiter config option (bsc#1056526)
* kpartx: helper functions for name and uuid generation (bsc#1056508)
* kpartx: search partitions by UUID, and rename (bsc#1056508)
* kpartx: fix a corner case when renaming partitions (bsc#1056508)
* kpartx: -d must work with empty partition table (boo#1056599)
* kpartx: only recognize dasd part table on DASD (boo#1056599)
Rework of the udev rules related to multipath and kpartx (bsc#1054363):
* libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
* libmultipath: add get_udev_device
* libmultipath: get_refwwid: use get_udev_device
* libmultipath: use const char* in some dm helpers
* libmultipath: add DI_NOIO flag for pathinfo
* libmultipath: add dm_get_multipath
* multipath: implement "check usable paths" (-C/-U)
* 11-dm-mpath.rules: multipath -U for READY check
* 11-dm-mpath.rules: import more ID_FS_xxx vars from db
* 11-dm-mpath.rules: no need to test before IMPORT
* 11-dm-mpath.rules: handle new maps with READY==0
* 11-dm-mpath.rules: don't set READY->ACTIVATION
* 11-dm-mpath.rules: Remember DM_ACTIVATION
* multipath.rules: set ID_FS_TYPE to "mpath_member"
* kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
* kpartx.rules: improved logic for by-uuid and by-label links (forwarded request 520380 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/520381
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=90
- Update to version 0.7.2+44.3a8d750c:
Misc bug fixes:
* multipathd: don't flood system with sd_notify calls (bsc#1056011)
* libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
* libmultipath: add_feature: allow only 1 feature (bsc#1055635)
* multipath: delegate dangerous commands to multipathd (bsc#1047639)
* libmultipath: fix partition_delimiter config option (bsc#1056526)
* kpartx: helper functions for name and uuid generation (bsc#1056508)
* kpartx: search partitions by UUID, and rename (bsc#1056508)
* kpartx: fix a corner case when renaming partitions (bsc#1056508)
* kpartx: -d must work with empty partition table (boo#1056599)
* kpartx: only recognize dasd part table on DASD (boo#1056599)
Rework of the udev rules related to multipath and kpartx (bsc#1054363):
* libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
* libmultipath: add get_udev_device
* libmultipath: get_refwwid: use get_udev_device
* libmultipath: use const char* in some dm helpers
* libmultipath: add DI_NOIO flag for pathinfo
* libmultipath: add dm_get_multipath
* multipath: implement "check usable paths" (-C/-U)
* 11-dm-mpath.rules: multipath -U for READY check
* 11-dm-mpath.rules: import more ID_FS_xxx vars from db
* 11-dm-mpath.rules: no need to test before IMPORT
* 11-dm-mpath.rules: handle new maps with READY==0
* 11-dm-mpath.rules: don't set READY->ACTIVATION
* 11-dm-mpath.rules: Remember DM_ACTIVATION
* multipath.rules: set ID_FS_TYPE to "mpath_member"
* kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
* kpartx.rules: improved logic for by-uuid and by-label links
OBS-URL: https://build.opensuse.org/request/show/520380
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=132
- Update to version 0.7.2+11+suse.448921a2:
* multipath.conf.5: document no_partitions compat support
* libmultipath: fixup compat support for 'features "1 no_partitions"'
- Dropped 67-kpartx-compat.rules (SUSE legacy).
* symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
only "/dev/mapper/${UUID}-part${X}" (with "minus")
- Dropped automatic kpartx invocation on dmraid devices (fate#323743)
- Rebase to upstream multipath-tools 0.7.2:
- Update to version 0.7.2+8+suse.95e8f43e: (forwarded request 516239 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/516240
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=89
- Update to version 0.7.2+11+suse.448921a2:
* multipath.conf.5: document no_partitions compat support
* libmultipath: fixup compat support for 'features "1 no_partitions"'
- Dropped 67-kpartx-compat.rules (SUSE legacy).
* symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
only "/dev/mapper/${UUID}-part${X}" (with "minus")
- Dropped automatic kpartx invocation on dmraid devices (fate#323743)
- Rebase to upstream multipath-tools 0.7.2:
- Update to version 0.7.2+8+suse.95e8f43e:
OBS-URL: https://build.opensuse.org/request/show/516239
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=130
- Rebase to upstream multipath-tools 0.7.2.
- Drop 67-kpartx-compat.rules
- Update to version 0.7.2+8+suse.95e8f43e:
* libmultipath: retain_attached_hw_handler obsolete with 4.3+
* multipath-tools: move up TEMPLATE in hwtable
* multipath-tools: delete libdmmp/docs/man directory in make clean
* libmultipath: fix unit to seconds in log message for checker timeout
* multipath-tools: add HPE StoreVirtual 3200 family to hwtable
* multipath-tools: add HPE MSA 2050/2052 to hwtable
* multipath-tools: add/change fujitsu arrays
* multipath-tools: check sysfs path state for NVMe/NVMf
* multipath-tools: sync third-party headers with 3.13 upstream
* multipath-tools: beautify path_latency.c code
* multipath-tools: fix format in multipath.conf.5
* libmultipath: update 3PARdata builtin config
* Bump version to 0.7.2
* libmultipath: don't try to set hwhandler if it is retained
(bsc#1037533)
* libmultipath: don't [un]set queue_if_no_path after domap
* kpartx/devmapper.h: remove dm_no_partitions
* libmultipath: compat support for 'features "1 no_partitions"'
(fate#323406)
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
(bsc#1047180)
* kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
* kpartx.rules: skip creating by-uuid and by-label links
(fate#32340)
- Update to version 0.7.1+69+suse.3bfa5af1:
* Merge branch 'sles12-sp3-fixes' into sles12-sp3
OBS-URL: https://build.opensuse.org/request/show/516121
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=129
- Update to version 0.7.1+62+suse.7fd2387b:
* Revert "kpartx: use mapname if no uuid is present"
(bsc#1037533, bsc#1033541)
- "no_path_retry" patch series (bsc#1043027)
* libmultipath: load_config: skip setting unnecessary defaults
* libmultipath: add/remove_feature: use const char* for feature
* libmultipath: clarify option conflicts for "features"
* libmultipath: merge_hwe: fix queue_if_no_path logic
* libmultipath: assemble_map: fix queue_if_no_path logic
* multipath.conf.5: document no_path_retry vs. queue_if_no_path
* multipath.conf.5: Remove ??? and other minor fixes
* libmultipath: add deprecated warning for some features settings
- _service: Use "sles12-sp3" branch as revision, as factory
and SLE12-SP3 submissions are in sync. Will be changed when
factory forks off (latest at SLE12-SP3 GA).
OBS-URL: https://build.opensuse.org/request/show/505512
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=126
- Update to version 0.7.1+53+suse.07c2f6ac:
Merged upstream fixes:
* multipath: Merge the DELL MD3xxx device configs
* multipath: fix up position independent code
* libmultipath: fix partition detection
* kpartx: default to running in sync mode
* libmultipath: force udev reloads
* kpartx: only check for 'no_partitions' feature on dm devices
* kpartx: test-kpartx: new unit test program
* kpartx: remove is_loop_device
* kpartx: relax and improve UUID check in dm_compare_uuid
* kpartx: dm_remove_partmaps: support non-dm devices
* kpartx: dm_devn: return error for non-existent device
* kpartx: don't treat multi-linear mappings as partitions
* libmultipath: don't treat multi-linear mappings as partitions
* kpartx: use partition UUID for non-DM devices
* kpartx: use absolute path for regular files
* kpartx: find_loop_by_file: use sysfs
* kpartx: include sys/sysmacros.h
* libmultipath: print.c: make sure lines are 0-terminated
* multipath-tools: fix compilation with gcc < 4.9
* libmultipath: print alias with no_path_retry message
* multipathd: force reload device on all resizes
* libmultipath: refactor calls to get dm device info
* libmultipath: fix suspended devs from failed reloads
* kpartx: fix device checks
* mpath_persist: Don't join threads that don't exist
* multipath-tools: document uid_attribute for NVME devices
* Makefile: Remove assignments to unused variables (forwarded request 503640 from mwilck)
OBS-URL: https://build.opensuse.org/request/show/503642
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=87
- Update to version 0.7.1+53+suse.07c2f6ac:
Merged upstream fixes:
* multipath: Merge the DELL MD3xxx device configs
* multipath: fix up position independent code
* libmultipath: fix partition detection
* kpartx: default to running in sync mode
* libmultipath: force udev reloads
* kpartx: only check for 'no_partitions' feature on dm devices
* kpartx: test-kpartx: new unit test program
* kpartx: remove is_loop_device
* kpartx: relax and improve UUID check in dm_compare_uuid
* kpartx: dm_remove_partmaps: support non-dm devices
* kpartx: dm_devn: return error for non-existent device
* kpartx: don't treat multi-linear mappings as partitions
* libmultipath: don't treat multi-linear mappings as partitions
* kpartx: use partition UUID for non-DM devices
* kpartx: use absolute path for regular files
* kpartx: find_loop_by_file: use sysfs
* kpartx: include sys/sysmacros.h
* libmultipath: print.c: make sure lines are 0-terminated
* multipath-tools: fix compilation with gcc < 4.9
* libmultipath: print alias with no_path_retry message
* multipathd: force reload device on all resizes
* libmultipath: refactor calls to get dm device info
* libmultipath: fix suspended devs from failed reloads
* kpartx: fix device checks
* mpath_persist: Don't join threads that don't exist
* multipath-tools: document uid_attribute for NVME devices
* Makefile: Remove assignments to unused variables
OBS-URL: https://build.opensuse.org/request/show/503640
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=122
---------------------------------------------------------------------
- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
- spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
- Update to version 0.7.1+7+suse.3edc5f7d:
* kpartx: use mapname if no uuid is present (bsc#1033541)
* kpartx: relax check when checking for a kpartx device (bsc#1033541)
* libmpathpersist: use extern struct udev (bsc#1027188)
* kpartx: include sys/sysmacros.h (fix compilation warning)
- Update to upstream version 0.7.1:
* multipath-tools: improve processing efficiency for addition and deletion of multipath devices
* uevent_can_discard: optimize devpath check
* multipathd: fix SIGUSR2 handling
* multipath-tools: clean up libdmmp/Makefile
* multipath-tools: libdmmp: Fix incorrect use of __attribute__
* multipath-tools: Remove trailing whitespaces
* multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
* multipath-tools: build objects for libdmmp and libmpathpersist independently
* libdmmp: minor Makefile cleanup
* multipath-tools: remove incdir from Makefiles
* libdmmp: don't disconnect from multipathd twice
* multipathd: don't call strlen on NULL variables
* libdmmp: move libdmmp.pc install location
* multipathd: drop lock before calling uev_add_path
* multipathd: allow devices to switch from RW to RO
* libmultipath: don't set max_sectors_kb on reloads
* Remove a trailing tab
* multipath: fix segfault with disable_changed_wwids
* multipath-tools: amend text from multipath/multipath.conf.5
* Bump the version code and date
* multipath-tools: replace multipath configuration output
OBS-URL: https://build.opensuse.org/request/show/491762
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=120
- Update to version 0.6.4+103+suse.bcb5d0f4:
* changed to official github repo openSUSE/multipath-tools
(no changes code-wise)
- Spec file: Added dependency on sg3_utils (#boo1028857)
- spec file changes: optional librados and libdmmp support
* enabled by default on Factory and Leap
(disable with --without-rados, --without-libdmmp)
* disabled by default on SLES12
(enable with --with-rados, --with-libdmmp)
* libdmmp0_1_0 and libdmmp-devel as separate packages
* minor fixes for RPMLINT warnings
- Update to version 0.6.4+102.0119472d:
* rebased, code-wise identical to previous checkout
- Update to version 0.6.4+102.df7d367e:
* libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
(bsc#1004858)
- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
* Make libdmmp build optional
* multipath.rules: use -i flag to multipath
* kpartx: create symlinks for dmraid devices
* kpartx: Add udev compability rules for SUSE
* libmultipath/checkers: make RADOS checker optional
* multipathd: fixup check for new path states (bsc#1019798)
* tur: Add pthread_testcancel() (bsc#101979)
* kpartx: sanitize delete partitions (bsc#100869)
* libmultipath: coalesce_paths: trigger uevent if nothing done
OBS-URL: https://build.opensuse.org/request/show/478509
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=114
- Include fixes from upstream:
* memory leak in orphan_paths
* More hardware table cleanups
* Add 'serial' keyword to weightedpath prioritizer
- Set timeout for CLI commands correctly (bsc#990265)
- Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
- multipathd.service: Fixup Wants= and Before= statements
(bsc#991742, bsc#986734)
- Include patches from upstream:
* Cleanup hardware tables by removing default entries
* More formatting fixes
* Order keywords in multipath.conf.5
* Change default pgpolicy from 'failover' to 'group_by_prio'
* kpartx: Fix check whether to detach a loop device
* Fix partly traversed loop in coalesce_paths()
* Fix memory leak in reconfigure()
* Cleanup include header files
* Bump version code to 0.6.2
- Fix multipath -l <devmap> without output (bsc#990480)
- Fix spelling in a log message
- Fix type of rcu_unregister()
- Do not perform POSIX mutex operations inside a signal handler
- Ensure that signals are delivered to the uxsock thread
- Fix memory leak in path group policies
- Update tarball to 0.6.2+suse20160728.d96f423
OBS-URL: https://build.opensuse.org/request/show/417043
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=102
- Remove 'udev_sync' argument from dm_simplecmd (bsc#903001)
- Ensure multipathd is started before systemd-udev-trigger
- Only import ID_FS_XXX variables if not set (bsc#909358)
- Fixup regular expression for HP MSA 2040 (bsc#920189)
- Add dependency on systemd-udevd.service (bsc#903001)
- Use ALUA for HP 3PAR (bsc#922105)
- Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)
- Load all device handler modules on startup (bsc#908529)
- libmultipath: make vpd page 0x80 optional (bsc#917963)
- Add HP MSA 2040 to the hardware table (bsc#920189)
- Revert 'Skip unhandled device types' (bsc#917701)
- skip uninitialized devices during reconfiguration (bnc#908915)
- memory overflow when printing help text (bnc#909742)
- Do not automatically fall back to vpd uid generation
- Improve vpd parsing
- multipathd: trigger all devices on startup (bnc#901465)
- Unset 'uid_attribute' on failure
- libmultipath: Fall back to SG_IO if no UID could be assigned
(bnc#908915)
- Assign local priority for NAA VPD descriptor (bnc#907483)
- libmultipath: finally fix dev_loss_tmo setting (bnc#889927)
- libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927)
- devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)
- kpartx: handle more than 256 loop devices (bnc#898427)
OBS-URL: https://build.opensuse.org/request/show/298597
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=89
- Fix segfault in recv_packet (bnc#896678)
- Fixup segfault due to double unlock
- Skip USB devices during discovery (bnc#865577)
- Ignore devices when sysfs_get_tgt_nodename fails (bnc#865577)
- Use sysfs attribute vpd_pg80 to read serial number
- Create rcmultipathd links (bnc#894513)
- multipathd: fix segfault in checkerloop() (bnc#894513)
- Use regenerate_posttrans rpm macros (bnc#892181)
OBS-URL: https://build.opensuse.org/request/show/249941
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=84
- Revert to ACT_RELOAD in domap() if the map exists
- multipathd: asynchronous configuration (bnc#891189)
- multipathd: timeout CLI commands when waiting for lock
(bnc#891189)
- Remove dm_udev_XXX wrapper functions
- uxlsnr: use typedef for trigger function
- multipathd: lock cli client list
- multipathd: Use standard lists for CLI handling
- Use strlen() when checking for valid wwid
- kpartx: zero out cookie (bnc#890902)
- multipathd: Check for empty wwid when processing events
(bnc#892214)
- Fixup device-mapper cookie handling yet again (bnc#890902)
- Allow zero-sized devices during configuration
- multipathd: issue warning on CLI command timeout (bnc#891189)
- Do not remove paths without uevent (bnc#890998)
- Fixup structure misalignment in config.h (bnc#890747)
- Do not print empty multipaths section
- Fixup 'uxsock_timeout' handling
- Reload map if reinstate failed (bnc#890854)
- Close memory leak in print_multipath_topology
- Implement 'uxsock_timeout' keyword (bnc#890551)
- Return error when receiving CLI packet (bnc#890551)
- multipath: do not print state 'orphan' for option '-l' (bnc#890551)
- Fix race conditions during uevent processing (bnc#890994)
OBS-URL: https://build.opensuse.org/request/show/245558
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=78
- Skip unhandled device types (bnc#881125)
- use 'uid_attribute' per default when generating WWID (bnc#881125)
- Use a default dev_loss_tmo of 600 (bnc#889927)
- Fixup device-mapper 'cookie' handling (bnc#886743)
- Remove last argument from verify_paths()
- Add paths with a size of '0' as 'ghost' paths
- Remove sysfs_get_dev()
- Use glibc 'major' and 'minor' macros
- Whitespace cleanup in mpath_persist
OBS-URL: https://build.opensuse.org/request/show/243670
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=76
- Patches from upstream:
* enable gcc format-security check
* Accept "*" as a valid regular expression
* check info.exists to get valid value
* Don't forget to reload table when both reload and rename
is required
* libmultipath: Simplify read_line()
* libmultipath: Zero-terminate sysfs_attr_get_value() result
* libmultipath: Print line number for which parsing failed
* libmultipath: Accept "*" as a valid regular expression
* multipath: Wrong sysfs attribute used for iSCSI settings
(bnc#883808)
- Check for valid DM_DEVICE_INFO before proceeding
(bnc#888453)
- Scalability fixes (bnc#880356):
* Separate out uevent parsing functions
* Use poll() when receiving uevents
* multipathd: push down lock in checkerloop()
* Allow specific CLI commands to run unlocked
* Push down vector lock during uevent processing
OBS-URL: https://build.opensuse.org/request/show/242290
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=72
- recovery_tmo for iSCSI sessions not updated (bnc#883808)
- Only filter for udev property if uid_attribute is present
- Read wwid from sysfs vpg_pg83 attribute
- Update multipath.conf.5 to clarify wwid generation
- kpartx: Fixup persistent name generation (bnc#887582)
- Revert 'return PATH_DOWN for quiesced paths'
- Do not treat 'transport-offline' paths as 'offline' (bnc#888378)
- multipath: Check for running daemon when called with '-u'
(bnc#886154)
OBS-URL: https://build.opensuse.org/request/show/241989
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=71
- multipath: use option '-i' when called from udev (bnc#885628)
- multipath: add option '-i' to ignore wwids file (bnc#885628)
- Update hwtable for EMC XtremIO (bnc#880510)
- Remove unused variable 'aas' from alua prioritzer
- Patches from upstream:
* Add multipath.conf force_sync option
* make prioritizers use checker_timeout, if set
* Improve multipath.conf syntax checking
* orphan paths on failed add
* Add missing interactive commands to multipathd man page
* Make multipathd orphan paths that were removed externally
* allow users to add wwids to /etc/multipath/wwids with -a
* change conf->dry_run to conf->cmd
* Return the correct size buffer in set_value()
* Fix memory issues in path reordering failure code paths
OBS-URL: https://build.opensuse.org/request/show/239529
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=69
- Fixup race condition with udev (bnc#883878)
- Cleanup foreground operation handling in multipathd
- Fix some minor issues in path reordering code (bnc#870465)
- Patches from upstream:
* Use existing user friendly names if possible
* kpartx: fix extended partition size for >512b sectors
* Mismatch between allocation length and transfer length in
rdac prio
* Mismatch between allocation length and transfer length in
emc_clariion prio.
OBS-URL: https://build.opensuse.org/request/show/238460
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=67
- Install multipath rule under 56-multipath.rules (bnc#873151)
- Implement option '-u' for uevents (bnc#873151)
- Remove trailing linefeed from sysfs attributes
- Make checker_put() and prio_put() idempotent
- Implement 'list path' CLI command
- Disable reassign maps per default
- Allow for NULL path when printing information
- Fixup wwid blacklist printing
- Use SCSI_IDENT_.* as the default property whitelist (bnc#872929)
- Do not call 'blkid' in kpartx.rules
- Allow empty wwids during discovery (bnc#872712)
- Always set verbosity to '0' when checking devices (bnc#867840)
- Fixup multipath rules for booting (bnc#870764)
- Fixup dependencies in multipathd.service (bnc#872712)
- Do not print empty device strings during discovery (bnc#872712)
- Use multipath wwid if path wwid is empty (bnc#872712)
- Set the correct PID when running in debug mode
- Fixup ordering cycle with systemd (bnc#863218) (forwarded request 229720 from hreinecke)
OBS-URL: https://build.opensuse.org/request/show/229874
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/multipath-tools?expand=0&rev=60
- Install multipath rule under 56-multipath.rules (bnc#873151)
- Implement option '-u' for uevents (bnc#873151)
- Remove trailing linefeed from sysfs attributes
- Make checker_put() and prio_put() idempotent
- Implement 'list path' CLI command
- Disable reassign maps per default
- Allow for NULL path when printing information
- Fixup wwid blacklist printing
- Use SCSI_IDENT_.* as the default property whitelist (bnc#872929)
- Do not call 'blkid' in kpartx.rules
- Allow empty wwids during discovery (bnc#872712)
- Always set verbosity to '0' when checking devices (bnc#867840)
- Fixup multipath rules for booting (bnc#870764)
- Fixup dependencies in multipathd.service (bnc#872712)
- Do not print empty device strings during discovery (bnc#872712)
- Use multipath wwid if path wwid is empty (bnc#872712)
- Set the correct PID when running in debug mode
- Fixup ordering cycle with systemd (bnc#863218)
OBS-URL: https://build.opensuse.org/request/show/229720
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=60
- Import multipath-tools from SLES11 SP1.
- Increase initial timeout for 'tur' checker (bnc#616694)
- Set geometry information for multipath maps (bnc#613363)
- Reset 'running' parameter for directio (bnc#600043)
- Add fallback to init script for older versions (bnc#602957)
- Add HP 2000 to internal hardware table (bnc#603359)
- Make path state messages unique
- Add 'reassign_maps' configuration parameter
- Profiling fixes:
* Update 'max_fds' handling
* Use strcmp() instead of strcmp_chomp()
* Simplify sysfs_get_device()
* Remove duplicate calls to path_offline()
* Simplify dm_get_name()
* Fixup devt2devname()
* Rework dm_reassign()
- check argument length in execute_program(bnc#610914)
- Do not use LOG_CONS when opening syslog (bnc#610914)
- Remove pid file usage from init scripts (bnc#600412)
- Fixup boot.multipath init script (bnc#600412)
- Always provide symlinks for udev (bnc#603785)
- Use minor number in ev_remove_map() (bnc#599770)
- signal_waiter() overwrites structure (bnc#591399)
- Serialize startup on large machines (bnc#598697)
- Update multipath(8) manpage for '-p' (bnc#602970)
- Mark 'readsector0' checker as deprecated (bnc#589340)
- Errorneous message 'error starting uevent listener'
- Graceful shutdown of logging thread (bnc#591399)
- Missing '-p' option for mkdir in mkinitrd script (bnc#597786)
- rdac message not printed correctly (bnc#598302)
- Use alias when printing log messages (bnc#598302)
- valgrind fixes (bnc#591399)
- Use VECTOR_SIZE() defines
- Update hwtable factorization
- Use log_close() on shutdown
- Use refcounting for checkers (bnc#591399)
- More valgrind fixes
- Provide correct persistent symlinks for user_friendly_names
(bnc#596301)
- Fixup hardware table for LSI arrays (bnc#597713)
- Reassign maps during startup (bnc#586834)
- Update manpage
- Use mkdir -p in mkinitrd setup script (bnc#597786).
- Remove 'minor' argument from add_map_without_path
- Check for correct device-mapper device in uevent handler
- Start uevent service handler from main thread
- Do not reassign multipath maps (bnc#594341)
- Protect waiter structure by mutex (bnc#581200)
- Log directly to syslog on shutdown (bnc#581200)
- Clear up uevent queue on shutdown
- Add more IBM/FAStT arrays (bnc#578738)
- Display average priority as group priority (bnc#588591)
- Implement 'wait event' cli command (bnc#586834)
- Reset existing maps (bnc#577894)
- Setup 'checkint' when loading config file (bnc#586847)
- Fix typo in persistent rules for by-label/by-uuid
- Update debug string in verify_paths()
- Evaluate feature setting in verify_paths() (bnc#584197)
- Fixup 'async_timeout' initialization again (bnc#580413)
- 'reset log' cli command crashes daemon (bnc#577889)
- Initialize 'async_timeout' variable correctly (bnc#580413)
- Add hardware defaults for EMC Invista (bnc#573870)
- Use '--replace-whitespace' for scsi_id (bnc#572209)
- Asynchronous mode for tur checker (bnc#552688)
- Update queue_if_no_path after sync with kernel state
(bnc#570932)
- Add 'max_polling_interval' config variable (bnc#570932)
- Add 'async_timeout' configuration variable (bnc#570932)
- Use default scsi_id callout for EMC Symmetrix (bnc#528481)
- Update path_offline() to return device status
- Update filename in init script
- Fixes from upstream:
* do not allow 0 size for multipath devices
* Add nexenta comstart hardware defaults
* Add checks for conf->xxx
* Add %z wildcard to display path serial
* don't pretend config file has setup parameters
* documentation fixes
- Fixup kpartx initrd script to handle loop devices (bnc#523749)
- Switch off 'queue_if_no_path' before removing maps (bnc#475523)
- Update logical partition handling (bnc#551827)
- Fix mkinitrd scripts for 64bit (bnc572143)
- Remove logical partitions maps with 'multipath -f'
- testing for existence of /lib64 is not sufficient to find out
if we are building for a lib64 platform
- Update dev_loss_tmo for no_path_retry (bnc#492469)
- Merge in changes from OpenSUSE 11.2
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- Update no_path_retry setting when evaluating features (bnc#542145)
- directio: block count calculation wrong (bnc#549028)
- multipath segfaults if configuration file contains errors
(bnc#540118)
- Fixup strip whitespaces from getuid output (bnc#542085)
- Change prefix for DASD devices to 'ccw'
- Update no_path_retry setting when evaluating features (bnc#542145)
- Update features when queue_if_no_path is set (bnc#511607)
- Ignore error messages when multipathd is not started
- Add debugging output for feature changes
- Add generic LSI/Engenio controller (bnc#508030)
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- TUR checker should not return 'failed' for reservation conflict
(bnc#498413)
- Check for errors in pthread_create()
- Lock vectors during shutdown
- Cleanup various MALLOC/REALLOC callers
- Fix multipathd crash on shutdown
- Do not run kpartx on dm-uevent messages (bnc#473352)
- Set pthread stacksize correctly (bnc#485287)
- Add STK arrays to internal hardware table (bnc#503855)
- Correct persistent symlink for cciss (bnc#497997)
- Backport some fixes from upstream (bnc#445023)
- Add 'reset log' cli command
- no_path_retry <N> causes I/O to fail (bnc#485281)
- Terminate uevent service queue
- Wait for daemon to shutdown (bnc#481389)
- Update cli request processing
- Safe memory allocation in cli_handlers
- Use 'LOG_CONS' option for openlog()
- Remove sysfs attribute cache
- Add 'shutdown' cli command
- Display FC error messages correctly
- Wait for devices in init script (bnc#487586)
- Always synchronize with dm state (bnc#447887)
- Add 'aas' path prioritizer (bnc#472069)
- Synchronize daemon startup with init file (bnc#481389)
- Merge feature string in assemble_map (bnc#507793)
-------------------------------------------------------------------
- Reset checker message for blocked checkers
- Increase priority for EMC Clariion arrays (bnc#484529)
- Start waiter threads for single paths correctly (bnc#473841)
- Use pthread_sigmask in alias.c when called from daemon.
- Add %pre and %post scripts to stop multipathd during update
- Don't set FC parameter on non-SCSI devices
- multipath -t crashes with invalid configuration file
- Don't remove partition mappings on stop (bnc#468826)
- Set stacksize for log thread
- Terminate all I/O before flushing maps (bnc#475523)
- Select 'features' keyword from multipath setting (bnc#465009)
- Use lists for uevent processing (bnc#478874)
- Set stacksize of uevent handling thread (bnc#478874)
- Increase uevent buffer size
- Strip trailing blanks from wwid
- Stack overflow in uev_trigger (bnc#476540)
- Fixup multibus zero path handling (bnc#476330)
- Update checker handling for blocked devices
- Only pass block events to multipathd
- Clean up uevent processing (bnc#478874)
- Set stacksize correctly for event processing thread (bnc#478874)
- Remove stray umask() call (bnc#458598)
- Don't call kpartx if no paths are active (bnc#473352)
- Multipathd dies immediately after startup (bnc#473029)
- Return ghost state if port is in standby (bnc#475816)
- Switch off queue_if_no_path before removing paths (bnc#475523)
- Fix leastpending loadbalancer output (bnc#444199)
- Start waitevent checker on new paths (bnc#473841)
- Use 'noflush' for kpartx (bnc#473352)
- Display multipath output for leastpending loadbalancer
properly (bnc#444199)
- Set queue_if_no_path setting during map reload (bnc#472253)
- Remove obsolete 'umount map' uevent handling
- Retry TUR on driver errors (bnc#456961)
- Copy persistent bindings file into initramfs (bnc#468804)
- Invert DM_STATE check for kpartx rules (bnc#440959)
- Correct dbg_malloc() definition
- Fix more memory leaks
- Double free on path release (bnc#458393)
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=16
# SUSE policy: disable partition deletion by default
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
