- Update to new upstream version 2.4.23
- Allow saving config when Modbus master timeout is changed for RS485 Bricklet
- Enable Python development mode when running from source
- Fix socket leak on connect error
- Add manual y-axis scaling for plot widget
- Remove all driver files for Windows 7 and earlier
- Fix calibration dialog title for Compass Bricklet plugin
- Fix Galileo satellite numbers for GPS Bricklet 3.0
- Add support for IPv6 connections
- Add commandline options to specify host, port and secret
- Add tab select menu that stays in the top left corner
- Fix corner cases in IMU Brick(let) plugin untab handling
- Add manual firmware list update button if auto-search for updates is disabled
OBS-URL: https://build.opensuse.org/request/show/1061063
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=27
- Update to new upstream version 2.4.22
- Add support for GPS Bricklet 3.0 and ESP32 (Ethernet) Brick
- Add Data Logger support for GPS Bricklet 3.0
- Improve plot color palette for dark themes
- Rework plot timing logic to greatly reduce jitter
- Draw a vertical line to indicate time jumps in plots
- Fix driver installation on Windows
- Upgrade bundled Python to 3.9 on Windows (Windows 8.1 required)
- added 0001-red-Handle-service-provider-country-codes-missing-in.patch to fix build
OBS-URL: https://build.opensuse.org/request/show/997979
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=25
- Update to new upstream version 2.4.20
- Hide unused custom line ending controls in hex mode in RS485 Bricklet plugin
- Reuse thread in Data Logger timer to avoid slow memory leak
- Fix Data Logger device list clearing on config loading
- Fix slow memory leak in Data Logger data tab
- Add firmware version column to Health Monitor dialog
- Improve udev rule compatibility on Linux
- Add support for RTC driver config to HAT Brick plugin
- Add support for simple mode to NFC Bricklet plugin
- Increase required PySerial version to 3.0
- Add support for flashing ESP32 (Ethernet) Bricks
OBS-URL: https://build.opensuse.org/request/show/930534
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=22
- Add support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
- Add Data Logger support for DC 2.0, Industrial PTC and Silent Stepper Bricklet 2.0
- Fix Healthmonitor error handling
- Filter Updates/Flashing and RED Brick Console serial port selection based on
USB product- and vendor-ID
version 2.4.18:
- Add minimal health monitor dialog
- Fix state handling for untabbed plugins
- Force correct UI state after aborting autoreconnect on error
- Handle errors while opening Data Logger debug log file
- Update download.tinkerforge.com certificate chain to fix update autodetection
- Autoselect download directory for Brick Viewer downloads
- Check if NFC Bricklet is in correct state to start cardemu discovery
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=19
- Fix monoflop handling to cover full uint32 duration range
- Better indicate disconnected state
- Highlight timeout error counter > 0 in bold red
- Fix slider/spinbox mismatch on auto-reconnect in DC Brick plugin
- Avoid UI jumps on value changes in Energy Monitor Bricklet plugin
- Add extra checkbox to avoid accidental port number changes
- Handle all errors while downloading firmware updates
version 2.4.13:
- Fix race condition in RED Brick program state tracking
- Report actual cause for connection errors
- Don't reset RED Brick tab on every enumerate callback (fixes tab reset on
selecting the Server Monitoring tab)
- Ensure that all dialogs have proper close buttons
- Fix close buttons for for detached tabs
- Fix race condition in RED Brick overview sorting
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=11
Update to new upstream version 2.4.12:
- make build reproducible (boo#1041090)
- Fix Server Monitoring support for Ambient Light 3.0 and IO-4 Bricklet 2.0
- Fix WIFI Extension 2.0 no-encryption configuration
- Add checkbox for setting the WIFI Extension 2.0 mesh password, old password is
not shown anymore
- Improve firmware update error handling
- Fix RS485 Bricklet Modbus slave logic for write-multiple-registers function
- Improve RS485 Bricklet input field history handling
- Fix Data Logger support for Color Bricklet 2.0
- Improve corner case handling in enumerate callback logic
- Fix error handling for RED Brick file upload
- Fix maximum number of LEDs for LED Strip Bricklet 2.0
- Show milliseconds in GPS Bricklet 2.0 timestamp
OBS-URL: https://build.opensuse.org/request/show/788096
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=7
update to new upstream version 2.4.11
- Make Thermal Imaging Bricklet image view detachable
- Fix firmware auto-update for Co-MCU Bricklets
- Avoid potential config file writing collision between two Brick Viewer
instances on Linux and macOS
- Notarize Brick Viewer app to make it ready for macOS 10.15
- Fix potential crash in WIFI Extension 2.0 firmware update detection logic
- Fix exception hook for Python 3.8
- Prefer hPa over mbar and Tesla over Gauss
- Add Data Logger support for RS232 Bricklet 2.0 data reading
- Add Server Monitoring support for Humidity Bricklet 2.0 temperature value
- Lower Hardened Runtime restrictions to make ctypes work again on macOS
- Fix encoding issues in Server Monitoring script
- remove integrated upstream patches
0001-Support-to-use-local-iso-codes-and-mobile-providers-.patch
0002-Fix-shebang.patch
OBS-URL: https://build.opensuse.org/request/show/761275
OBS-URL: https://build.opensuse.org/package/show/electronics/brickv?expand=0&rev=4