- Update to version 059+suse.375.gafb362e4:
* fix(network-legacy): handle do_dhcp calls without arguments (bsc#1210640)
fips=1 and separate /boot break s390x (bsc#1204478):
* fix(fips): move fips-boot script to pre-pivot
* fix(fips): only unmount /boot if it was mounted by the fips module
* feat(fips): add progress messages
* fix(fips): do not blindly remove /boot
OBS-URL: https://build.opensuse.org/request/show/1082465
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=494
- Update to version 057+suse.337.g4162a70e:
* fix(network-legacy): misleading duplicate address detection using wicked (bsc#1201235)
A series of fixes for NVMeoF boot (bsc#1203368):
* fix(man): dracut.cmdline.7: clarify "rd.nvmf.discover=fc,auto"
* fix(network): avoid double brackets around IPv6 address
* feat(nvmf): set rd.neednet=1 if tcp records encountered
* fix(man): dracut.cmdline(7): correct syntax for rd.nonvmf
* fix(network): don't use same ifname multiple times
* fix(nvmf): run cmdline hook before parse-ip-opts.sh
* fix(nvmf): avoid calling "exit" in a cmdline hook
* fix(nvmf): make sure "rd.nvmf.discover=fc,auto" takes precedence
* fix(nvmf): don't use "finished" queue for autoconnect
* fix(nvmf): don't create did-setup file
* fix(nvmf): no need to load the nvme module
* fix(nvmf): don't try to validate network connections in cmdline hook
* fix(nvmf): nvme list-subsys prints the address using commas as separator
* fix(systemd): add missing modprobe@.service (bsc#1203749)
* fix(i18n): do not fail if FONT in /etc/vconsole.conf has the file extension (bsc#1203267)
OBS-URL: https://build.opensuse.org/request/show/1010479
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=476
- Update to version 057+suse.315.gd210fc38:
* chore(suse): update spec
Fix "directories not owned by a package" caused by bash-completion directories not owned by dracut.
Do not install modules incompatible with the system architecture.
* chore(suse): change default persistent policy
* ci(suse.conf.example): update SUSE-specific config
* chore(suse): fix 99-debug.conf
OBS-URL: https://build.opensuse.org/request/show/1003523
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=474
- Update to version 055+suse.226.g44139dde:
* fix(zfcp_rules): remove collect based udev rule creators
* fix(dasd_rules): remove collect based udev rule creators
* fix(kernel-modules-extra): handle zstd module extension
* fix(ifcfg): add SUSE specific write-ifcfg file (bsc#1193518)
* fix(dracut-functions): skip iSCSI sessions without initiatorname (bsc#1195011)
* fix(dracut-functions.sh): ip route parsing (bsc#1195011)
* fix(fips): missing sourcing of dracut-lib
* fix(fips): wrong error message
* fix(network-legacy): install only existing SUSE specific files (bsc#1194879)
* fix(network-legacy): set dhclient as optional (bsc#1194879)
* fix(40network): consistent use of "$gw" for gateway (bsc#1192685)
* fix(multipathd-configure.service): drop unneeded dependencies
* fix(multipath): check if mpathconf is available
* fix(multipathd.service): drop dependencies on iscsi and iscsid
* fix(multipathd.service): adapt to upstream multipath-tools unit file
* fix(multipathd.service): remove dependency on systemd-udev-settle
* fix(fips): avoid shellcheck warnings
* fix(fips): get _vmname value only if it is needed
* fix(fips.sh): respect rd.fips.skipkernel
* fix(fips): alignment with the upstream format
OBS-URL: https://build.opensuse.org/request/show/949590
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=452
- Update to version 055+suse.194.gdd41932a:
* fix(network-legacy): add wicked as an alternative to arping (bsc#1193670)
* fix(network): add wicked as an alternative to arping (bsc#1193670)
- Update to version 055+suse.191.g67eb4ea8:
* fix(dracut-initramfs-restore.sh): add test for SUSE initrd name (bsc#1194570)
* fix(dracut.spec): require util-linux-systemd (bsc#1194162)
* fix(network-wicked): multiple path corrections
* fix(drm): add privacy screen modules to the initrd (bsc#1193590)
* fix(dracut.spec): update usrmerged mkinitrd dir
* fix(url-lib): improve ca-bundle detection (bsc#1175892)
OBS-URL: https://build.opensuse.org/request/show/946940
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=451
- Update to version 055+suse.158.g51e87247:
* chore(suse): add fido2 module (jsc#SLE-21070)
* feat(crypt): check if fido2 module is needed in hostonly mode (jsc#SLE-21070)
* feat(fido2): introducing the fido2 module (jsc#SLE-21070)
* feat(crypt): check if tpm2-tss module is needed in hostonly mode (jsc#SLE-21070)
* fix(dracut-functions.sh): get block device driver if in a virtual subsystem (bsc#1189776)
* fix(mdraid): allow UUID comparison for more than one UUID (bsc#1192665)
* fix(dracut.spec): update dependency for suse-module-tools
* fix(network-legacy): route parsing issues in ifup (bsc#1182688)
* fix(systemd-udevd): make collect optional (bsc#1177870)
OBS-URL: https://build.opensuse.org/request/show/935123
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=449
- Update to version 055+suse.106.g760b0c69:
* chore(suse): add Conflicts for old suse-module-tools to specfile (bsc#1187115)
- Update to version 055+suse.104.g9d45c1df:
* feat(suse-initrd): add INITRD_MODULES from /etc/sysconfig/kernel, too
* fix(suse-initrd): call dracut_instmods with hostonly=
* fix(suse-initrd): use $kernel rather than $(uname -r)
- Update to version 055+suse.100.ga2700279:
* fix(suse-initrd): remove references to INITRD_MODULES (bsc#1187115)
* chore(suse): erase conditional for usrmerge from specfile
* chore(suse): fix specfile for usrmerge
OBS-URL: https://build.opensuse.org/request/show/900623
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=437
* docs: update NEWS.md and AUTHORS
* fix(fs-lib): install fsck utilities
* fix(integrity): require ALLOW_METADATA_WRITES to come from EVM config file
* fix(install): configure logging earlier
* fix(warpclock): minor cleanups
* fix(dash): minor cleanups
* fix(mksh): minor cleanups
* feat(install): add default value for --firmwaredirs
* fix(dracut-functions): get_maj_min without get_maj_min_cache_file set
* fix(dracut): pipe hardlink output to `dinfo`
* fix(install): sane default --kerneldir
* fix(bash): minor cleanups
* fix(squash): don't mount the mount points if already mounted
* ci: add shfmt to Fedora containers
* fix(base): add missing `str_replace` to `dracut-dev-lib.sh`
* feat(dracut.sh): detect running in a container
* fix(base): split out `dracut-dev-lib.sh`
* fix(dracut-util): print error message with trailing newline
* fix(packit): downstream has renamed the master branch to main
- Update to version 054+suse.96.gb5aa64d2:
* fix(suse-initrd) fix list of modprobe.d directories
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=436
mkinitrd is now in its own subpackage "dracut-mkinit-deprecated",
which requires dracut. If you need mkinitrd, require "mkinitrd".
However note that in the long run, mkinit will go away. It is
preferred to call dracut directly.
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=435
* chore(suse) update spec
- Update to version 054+suse.94.g1648453e:
* chore(suse): re-add SUSE mkinitrd
- Update to version 054+suse.93.gd393f006:
With this release dracut has undergone a major overhaul.
A lot of systemd related modules have been added.
The integration test suite has finally ironed out the flaky behaviour due to the parallel device probing of the kernel,
which bit sometimes in the non-kvm github CI. So, if you see any /dev/sda in a setup script with more than two hard drives,
chances are, that the script works on the wrong disk. Same goes for network interfaces.
This release is also fully shellcheck'ed with ShellCheck-0.7.2 and indented with shfmt and astyle.
The dracut project builds test containers every day for:
opensuse/tumbleweed-dnf:latest
archlinux:latest
fedora:rawhide
fedora:latest
fedora:33
These containers can easily be used to run the integration tests locally without root permissions via podman.
We hope this serves as a blueprint for your distribution's CI process.
More information can be found in docs/HACKING.md.
Bug Fixes
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=434
Highlights: https://github.com/dracutdevs/dracut/releases/tag/053
dracut.sh:
unfreeze /boot on exit (d87ae137)
proper return code for inst_multiple in dracut-init.sh (d437970c)
fcoe:
rename rd.nofcoe to rd.fcoe (6f7823bc)
rd.nofcoe=0 should disable fcoe (805b46c2)
i18n:
get rid of eval calls (5387ed24), backported for 052 downstream
create the keyboard symlinks again (9e1c7f3d), backported for 052 downstream
network-manager:
run as a service if systemd module is present (c17c5b76)
rework how NM is started in debug mode (34c73b33)
drm: skip empty modalias files in drm module setup (c3f24184)
Highlights: https://github.com/dracutdevs/dracut/releases/tag/052
- Link release announcement for 052, fix typo
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=427
* chore: update suse/dracut.spec
- Update to version 052+suse.88.gc78b4ac8:
* fix(i18n): get rid of `eval` calls
* fix(i18n): create the keyboard symlinks again
* docs: update NEWS.md and AUTHORS
* chore: add `CONTRIBUTORS` target to Makefile
* docs: update docs/RELEASE.md
* docs: move NEWS to NEWS.md
* ci: force binary files for grep on disk images
* docs: RELEASE.md
* fix: shellcheck for dracut-init.sh
* fix: shellcheck for dracut-init.sh
* fix: shellcheck for dracut-init.sh
* fix: shellcheck for dracut-init.sh
* fix: shellcheck for dracut-init.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut.sh
* fix: shellcheck for dracut-functions.sh
* fix: shellcheck for dracut-logger.sh
* fix: shellcheck for modules.d/99squash/module-setup.sh
* fix: shellcheck for modules.d/99squash/clear-squash.sh
* fix: shellcheck for modules.d/99fs-lib/module-setup.sh
* fix: shellcheck for modules.d/99base/module-setup.sh
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=424
