46366b5ad4
* send_raw can now take hex digits as colon-separated -- e.g.
send _raw icom xfe:xfe:x94:xe0:03:xfd
* Add IC7760
* IC7300 Mode filter can now be set by # (i.e. 1,2,3)
* Fixed AF6SA WRC rotor controller
* Added Rhode&Schwarz XK852
* Added Xiegu X6200
* Added Commradio CTX-10
* Added Guoehe PMR-171
* Added csntechnoligies.net S.A.T Satellite rotor control
* Added PSTRotator control
* Added Flex SmartSDR slices A-H
* Added Motorola Micom M2/M3
* Added SDR Radio SDRConsole -- TS-2000 is now hardware flow
control so need separate entry
* Added --set-conf=filter_usb, filter_usbd, and filter_cw to
allow Icom rigs set mode to set filter number too
* Added macros for applications to obtain pointers to Hamlib
structures(issues #1445, #1420, #487). Internal conversion is
still a WIP, but use of these macros will make the final cutover
transparent to applications.
* Added Guohe Q900 entry
* Unify behavior of all rigctl split commands
* Make the set_split_* commands modify the state of the specified
split VFO -- the current or targeted VFO do not have any effect
* Make the set_split_* commands enable split automatically if not
enabled
* Make the get_split_* commands return frequency of 0 Hz, mode
NONE and filter of 0 Hz if split is not enabled
* Allow all split commands to avoid VFO swapping if supported by
the rig model
* Improve Icom backend to set/get frequency, mode and filter
without VFO swapping if supported by the rig model
* Improve Yaesu newcat backend split handling
* Expose "Targetable features" (RIG_TARGETABLE_*) in dump_caps
output to allow clients to determine which commands can be
executed without VFO swapping
* Added RIG_FUNC_SYNC for FTDX101D/MP
* Added Barrett 4100
* Added DL2MAN (tr)uSDX -- needs refinement
* Added Thetis entry -- derived from FlexRadio/Apache PowerSDR
* Added VOICE/CW memory capability to many rigs -- thanks to David
Balharrie M0DGB/G8FKH
* Add -# --skip_init option to rigctl to skip rig initialization --
useful for executing commands quickly
* rig_caps is no longer constant -- this may break some 3rd party
relying on the "const" declaration.
* IC7610 now has IPP, DPP, and TX_INHIBIT functions set/get
* Hamlib now starts a multicast server that sends out rig
information. Does not receive commands yet. See README.multicast
* rigctld has new -b/bind-all option to try all interfaces
-- restores original behavior. This was done to fix duplicate
rigctld instances on Windows
* Yaesu rigs can now use send_morse to send keyer message 1-5
or a CW message up to 50 chars (which will use memory 1)
* rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,
VDD,TEMP arguments to set which meter to display
* reg get level displays meter number=name now
* Added parm BANDSELECT for Yaesu rigs
'p BANDSELECT' returns current band of VFOA
'P BANDSELECT BAND160M' example selects the 160M band
'P BANDSELECT ?' shows bands available for the rig
* Added rig_cm108_get/set_bit to API and get/set_gpio to
rigctl(d) for GPIO1,2,3,4 access on CM108
* Added BG2FX FX4/C/CR/L
* Fixed IC7610 to use new 0x25 0x26 command added in latest
firmware
* Fix W command in rigctld to work properly -- can take
terminating char or # of bytes to expect
* Add rig_set_debug_filename so Python can redirect debug stream
* Fix Yaesu LBL_NR to use proper values
* Add IC-905
* Add Anytone D578UVIII -- should work on any D558 model and
perhaps others too
* Add saebrtrack rotor
https://sites.google.com/site/marklhammond/saebrtrack
* Add offset_vfoa and offset_vfob applying to rig_set_freq
* Fix K4 to put it in K40 mode when requesting ID
* Fixes for M2 Rotors
* Add rigctlsync utility to synchronize frequency from a rig
to SDR# (or others)
* Add SDR# rig for use with SDR#'s gpredict plugin -- can only
get/set freq
* Add Apex Shared Loop rotator -- unidirectional only so far
* Add client_version to rigctld so client can report it's
version for future use/compatibility/alternatives
* Add --set-conf=tuner_control_pathname=hamlib_tuner_control
(default). If file exists then it will be called with 0/1
(Off/On) argument with 'U TUNER 0' or 'U TUNER 1". Default
path is for current directory
* Add MDS 4710/9710 rigs
* Add FLIR PTU-D48, E46, D100, D300 rotors
* Fix FTDX3000 rig split
* Fix rigctld/rigctltcp information
* Fix FT817 get/set_vfo
- remove patch hamlib-add-stdlib-header.patch (applied upstream)
OBS-URL: https://build.opensuse.org/package/show/hardware:sdr/hamlib?expand=0&rev=45
7 lines
195 B
Plaintext
7 lines
195 B
Plaintext
-----BEGIN PGP SIGNATURE-----
|
|
|
|
iF0EABECAB0WIQSC1k9rDmfNQfaJu6b7LFEw1VqIGQUCZ2q+GgAKCRD7LFEw1VqI
|
|
GdcHAJ94GjtX7o5rpLl2dwn3TrltzQ7NKACeOEaNoJmfTFNgUmGJb6JuVfHm89Q=
|
|
=nODu
|
|
-----END PGP SIGNATURE-----
|