Compared to the previous sr#726248, added BuildIgnore directives to fix
building for the ppc64 and armv7l ports, and edited the (sub)package
descriptions some more.
- Moved hp-scan and hp-uiscan to a separate package "hp-scan".
These tools pull in PIL and python3-scikit-image, which causes
a rather big dependency list, which is only available in openSUSE.
This allows us also to get rid of the non-functional "hp-scan" tool
in SLE.
- Fixed --with-htmldir so that documentation is packaged
- Improved package descriptions and summaries
* Clarified the relationship of hplip-hpijs, hplip-sane, and hplip
* Shortened the descriptions
* Removed reference to HTML documention in package description
- Added -devel dependencies as required by post-build-checks
- Minor spec file cleanup (macro usage)
- Fixed build failures on non-standard architectures by adding BuildIgnore
These failures are actually caused by some ports catching up
slowly with package updates. But our BuildIgnores are helpful
nonetheless, making the build environment leaner.
OBS-URL: https://build.opensuse.org/request/show/726787
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=176
- Added hp-uiscan application
- Updated URLs and source URLs
- Updated/rebased hplip-misc-missing-includes-and-definitions.patch
- Added hplip-remove-imageprocessor.diff which fully removes references
to the closed source ImageProcessor. Thanks to Didier Raboud from Debian.
- Addded hplip-orblite-return-null.diff to let a function return NULL
insetad of nothing.
- update to 3.19.3
I have successfully tested with Leap 15 in my office environment
OBS-URL: https://build.opensuse.org/request/show/694147
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=170
- Version Upgrade to 3.17.6:
* Added support for the following new printers:
- HP LaserJet Enterprise M607n
- HP LaserJet Enterprise M607dn
- HP LaserJet Enterprise M608n
- HP LaserJet Enterprise M608dn
- HP LaserJet Enterprise M608x
- HP LaserJet Enterprise M608dh
- HP LaserJet Enterprise M609dn
- HP LaserJet Enterprise M609x
- HP LaserJet Managed E60055dn
- HP LaserJet Managed E60065dn
- HP LaserJet Managed E60065x
- HP LaserJet Managed E60075dn
- HP LaserJet Managed E60075x
- HP LaserJet Enterprise MFP M631dn
- HP LaserJet Enterprise Flow MFP M631h
- HP LaserJet Enterprise MFP M631z
- HP LaserJet Enterprise Flow MFP M632z
- HP LaserJet Enterprise MFP M632fht
- HP LaserJet Enterprise MFP M632h
- HP LaserJet Enterprise Flow MFP M633z
- HP LaserJet Enterprise MFP M633fh
- HP LaserJet Managed MFP E62555dn
- HP LaserJet Managed Flow MFP E62565h
- HP LaserJet Managed MFP E62565hs
- HP LaserJet Managed Flow MFP E62565z
- HP LaserJet Managed Flow MFP E62575z
- HP Color LaserJet Enterprise M652dn
- HP Color LaserJet Enterprise M652n
OBS-URL: https://build.opensuse.org/request/show/509494
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=143
- Version upgrade to 3.16.10:
* Added Support for the Following New Printers:
- HP officejetPro7740 wide Format All in one
- HP Office jet 6950 All-in-One printer
- HP ScanJet Pro 3000 s3 Sheet-feed Scanner
- HP ScanJet Enterprise Flow 5000 s4 Sheet-feed Scanner
- HP Scanjet Entrprise Flow 7000 s3 sheetfeed Scanner
- HP Color LaserJet Pro MFP M277c6
* Notes to follow:
- For scanjets scan using command "hp-scan --adf --size=size_name"
- "hp-scan --help" for all size_name
OBS-URL: https://build.opensuse.org/request/show/440826
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=132
- Fixed device communication/detection problems with mdns/Bonjour
see https://bugs.launchpad.net/hplip/+bug/1616861
In my home network, the HP printer/scanner (ENVY 5530) often fails with messages like this:
hp-toolbox[7119]: [7119]: error: Unable to communicate with device (code=12): hp:/net/ENVY_5530_series?zc=HP3464A9E628B4
I've tracked this down to two problems with the MDNS implementation in HPLIP:
1. On a multi-homed host, HPLIP uses only one interface for MDNS multicast send and receive. This leads to failure if the printer is not on the "default" network. The code uses just INADDR_ANY in its multicast IP_MULTPATH_IF and IP_ADD_MEMBERSHIP setsockopt calls, meaning that the kernel has to figure out the interface to use. This fails if the system has no default route, or if the HP device is on a different network than the default route. The solution is to receive and send multicast on all interfaces.
2. MDNS authorities (including HP printers) don't answer every query, especially the same query is repeated quickly. The latter happens when the HP tools start, causing the MDNS lookup procedure to fail and the "communication error" to be detected. This can be solved by retrying the query after a short wait (1-2s).
This build contains fixes for both problems.
OBS-URL: https://build.opensuse.org/request/show/423113
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=128
selinux support config
- Remove another nested conditions that are the same
- remove patch104: do_not_open_mdns_port.diff, no more needed
because since HPLIP 3.15.11 there is no longer "open_mdns_port=..."
in distros.dat for any "SUSE" distribution
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=124
* python3 support (not enabled to work on older distros now)
* Support for KF5 systemtray
* Fixed issues:
+ 1388126 - Doesn't build against libjpeg-turbo 1.3.90
+ 1395676 - hpcups crashes if DEVICE_URI not set in environment
+ 1388007 - Incorrect call to hpmudext.device_open
+ 1187055 - plugin download fails if python links to python3
+ 802999 - Incorrect IEEE 1284 Device IDs for many models
* For more info see http://hplipopensource.com/hplip-web/release_notes.html
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=106
- Make and install Python compiled bytecode files
(.pyc compiled python and .pyo optimized compiled python)
because normal users do not have write permissions to the
install location /usr/share/hplip/ so that for normal users
Python would recompile the sources every time,
see https://en.opensuse.org/openSUSE:Packaging_Python
- Hardlink .pyc and .pyo when they have same content but
do not run "fdupes buildroot/_datadir/hplip" because
fdupes will link any files with same content there
which can have unexpected side-effects (cf. bnc#784670).
- Removed RPM preun script that had deleted leftover .pyc
and .pyo files if made during run-time (see the entry below
dated Fri Feb 16 11:52:28 CET 2007) because now those files
are provided in the package.
- Removed trailing whitespaces in RPM changelog file.
OBS-URL: https://build.opensuse.org/request/show/256945
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=101
- From openSUSE 13.2 on explicitly
"BuildRequires cups-filters-foomatic-rip"
to avoid that foomatic-filters is used for build
in the "Printing" development project (where foomatic-filters
intentionally exists also for openSUSE_13.2 and openSUSE_Factory)
which would not match what is used for build in openSUSE:13.2 or
openSUSE:Factory (where foomatic-filters is intentionally dropped
and replaced by cups-filters-foomatic-rip). Using the matching
package for build results that the backward compatibility link
/usr/lib/cups/filter/foomatic-rip-hplip points to a foomatic-rip
executable that is used by default on the runtime system.
OBS-URL: https://build.opensuse.org/request/show/250076
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=99
- PPDs that require a proprietary plugin from HP must be moved to
the hplip main-package because the proprietary plugin from HP
must be downloaded and installed by using HP's "hp-plugin" tool
that belongs to the hplip main-package. Accordingly PPDs that
require a proprietary plugin from HP are in a new directory
/usr/share/cups/model/manufacturer-PPDs/hplip-plugin
that belongs to the hplip main-package (bnc#876690).
OBS-URL: https://build.opensuse.org/request/show/249259
OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=98
