f4734b651d
- update to 1.28.0:
* The QmiDevice interfaces to work with the expected data format and the wwan
interface name should now be considered to be specific to QMI devices exposed
by the upstream 'qmi_wwan' kernel driver. If the device is exposed with a
different driver (e.g. PCIe or QRTR) these methods will always fail.
* The QmiDevice now supports configuring the 'pass_through' sysfs setting in
the network interfaces exposed by the 'qmi_wwan' kernel driver, with a new
'qmap-pass-through' expected data format type. In this mode, the network
device will be managed by the rmnet kernel driver. A new method is also
provided to check in runtime whether a given expected data format value is
supported by the kernel or not.
* The QmiDevice now includes methods to list, create and delete links on the
network interface, that can be used to setup QMAP based multiplexing of
different data streams, e.g. connected to different APNs. When using the
'qmi_wwan' kernel driver, the link management logic depends on the configured
expected data format:
** rmnet netlink operations will be used if 'qmap-pass-through' expected
data format is configured.
** add_mux/del_mux operations will be used if 'raw-ip' expected data format
is configured.
* New services:
** New 'SAR' (Specific Absorption Rate) service, with support for the "Set RF
State" and "Get RF State" request/responses.
* New request/response/indications:
** uim: implement "Refresh Register" request/response.
** uim: implement "Refresh Register All" request/response.
** uim: implement "Refresh Complete" request/response.
** uim: implement "Refresh" indication.
** loc: implement "Get Engine Lock" request/response.
** loc: implement "Set Engine Lock" request/response.
** nas: implement "Get DRX" request/response.
** nas: implement "Get PLMN Name" request/response.
** wms: implement "Send Ack" request/response.
** wds: implement "Bind Data Port" request/response.
** wds: implement "Get Max LTE Attach PDN Number" request/response.
** wds: implement "Get LTE Attach PDN List" request/response.
** wds: implement "Set LTE Attach PDN List" request/response.
** wds: implement "Set LTE Attach PDN List" indication.
** wds: implement "Get LTE Attach Parameters" request/response.
** wds: renamed "Get Default Profile Num" to "Get Default Profile Number",
and provided compat symbols to avoid breaking API.
** wds: renamed "Set Default Profile Num" to "Set Default Profile Number",
and provided compat symbols to avoid breaking API.
* New TLVs supported in existing messages:
** nas: added the "Rx Chain 2/3 Info" TLVs in "Get Tx Rx Info".
** nas: added the "LTE Info Timing Advance" TLV in "Get Cell Location Info".
** nas: added the "LTE Voice Domain", "CDMA Registration Zone ID", "GSM
Routing Area Code", "WCDMA Routing Area Code" and "CDMA Resolved MCC"
TLVs in "Get System Info".
* libqmi-glib:
** Added support for 'embedded' and 'pcie' endpoint types.
** Added support for QMAPv5 data aggregation type.
* qmicli:
** When built with QRTR support, the '--device' option now allows QRTR URIs
(e.g. 'qrtr://0').
** New '--link-list', '--link-add', '--link-delete' and '--link-delete-all'
commands.
** New '--uim-monitor-refresh-file' command.
** New '--uim-monitor-refresh-all' command.
** New '--wds-bind-data-port' command.
** New '-loc-get-operation-mode' and '--loc-set-operation-mode' commands.
** New '-loc-get-engine-lock' and '--loc-set-engine-lock' commands.
** New '--wds-get-lte-attach-parameters' command.
** New '--wds-get-max-lte-attach-pdn-num' command.
** New '--wds-get-lte-attach-pdn-list' and '--wds-set-lte-attach-pdn-list'
commands.
** Updated the '--wds-start-network' command with a timeout of 180s.
** Updated the '--wds-stop-network' command with a timeout of 120s.
** Updated the '--dms-set-firmware-preference' command to use a key-value
pair based input instead of predefined fields.
* collections:
** basic: added UIM event registration commands.
** basic: added UIM slot management commands.
** basic: added UIM refresh related commands.
** basic: added WDS bind data port commands.
** basic: added WDS initial LTE bearer management commands.
** basic: added NAS PLMN name commands.
OBS-URL: https://build.opensuse.org/request/show/874481
OBS-URL: https://build.opensuse.org/package/show/network/libqmi?expand=0&rev=38
127 lines
3.7 KiB
RPMSpec
127 lines
3.7 KiB
RPMSpec
#
|
|
# spec file for package libqmi
|
|
#
|
|
# Copyright (c) 2020 SUSE LLC
|
|
# Copyright (c) 2012 Dominique Leuenberger, Amsterdam, The Netherlands.
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
%define _soname libqmi-glib5
|
|
|
|
Name: libqmi
|
|
Version: 1.28.0
|
|
Release: 0
|
|
# NOTE: The file headers state LESSER GPL, which is a mistake. The upstream intended license is LIBRARY GPL 2.0+
|
|
Summary: Library to control QMI devices
|
|
License: LGPL-2.1-or-later AND GPL-2.0-or-later
|
|
Group: Hardware/Modem
|
|
URL: https://www.freedesktop.org/wiki/Software/libqmi/
|
|
Source0: https://www.freedesktop.org/software/libqmi/%{name}-%{version}.tar.xz
|
|
Source99: libqmi-rpmlintrc
|
|
|
|
BuildRequires: pkgconfig
|
|
BuildRequires: python3-base
|
|
BuildRequires: pkgconfig(gio-2.0)
|
|
BuildRequires: pkgconfig(gio-unix-2.0)
|
|
BuildRequires: pkgconfig(glib-2.0) >= 2.36
|
|
BuildRequires: pkgconfig(gobject-2.0)
|
|
BuildRequires: pkgconfig(gudev-1.0) >= 147
|
|
BuildRequires: pkgconfig(mbim-glib) >= 1.14
|
|
|
|
%description
|
|
libqmi is a glib-based library for talking to WWAN modems and devices
|
|
which speak the Qualcomm MSM Interface (QMI) protocol.
|
|
|
|
%package -n %{_soname}
|
|
Summary: Library to control QMI devices
|
|
Group: System/Libraries
|
|
# The tools are a useful addition
|
|
Recommends: %{name}-tools
|
|
|
|
%description -n %{_soname}
|
|
libqmi is a glib-based library for talking to WWAN modems and devices
|
|
which speak the Qualcomm MSM Interface (QMI) protocol.
|
|
|
|
%package tools
|
|
Summary: Helper utilities to control QMI devices
|
|
Group: Hardware/Modem
|
|
|
|
%description tools
|
|
libqmi is a glib-based library for talking to WWAN modems and devices
|
|
which speak the Qualcomm MSM Interface (QMI) protocol.
|
|
|
|
This package contains command line tools to manage such devices.
|
|
|
|
%package devel
|
|
Summary: Development files for the QMI device control library
|
|
Group: Development/Languages/C and C++
|
|
Requires: %{_soname} = %{version}
|
|
|
|
%description devel
|
|
A GLib/GIO based library to control QMI devices
|
|
|
|
This package contains files required to link sources against libqmi.
|
|
|
|
%prep
|
|
%autosetup -p1
|
|
|
|
%build
|
|
# Do not rely on env for choosing python
|
|
sed -i "s|env python|python3|g" build-aux/qmi-codegen/*
|
|
%configure \
|
|
--disable-static
|
|
%make_build
|
|
|
|
%install
|
|
%make_install
|
|
find %{buildroot} -type f -name "*.la" -delete -print
|
|
|
|
%check
|
|
make %{?_smp_mflags} check
|
|
|
|
%post -n %{_soname} -p /sbin/ldconfig
|
|
%postun -n %{_soname} -p /sbin/ldconfig
|
|
|
|
%files tools
|
|
%license COPYING
|
|
%doc NEWS
|
|
%{_bindir}/qmi-network
|
|
%{_bindir}/qmicli
|
|
%{_bindir}/qmi-firmware-update
|
|
# Own dirs to avoid depending on them while building
|
|
%dir %{_datadir}/bash-completion
|
|
%dir %{_datadir}/bash-completion/completions
|
|
%{_datadir}/bash-completion/completions/qmicli
|
|
%{_libexecdir}/qmi-proxy
|
|
%{_mandir}/man1/qmi-network.1%{?ext_man}
|
|
%{_mandir}/man1/qmicli.1%{?ext_man}
|
|
%{_mandir}/man1/qmi-firmware-update.1%{?ext_man}
|
|
|
|
%files -n %{_soname}
|
|
%license COPYING.LIB
|
|
|
|
%{_libdir}/libqmi-glib.so.*
|
|
|
|
%files devel
|
|
%doc AUTHORS README TODO
|
|
#Own these directories to not depend on gtk-doc
|
|
%dir %{_datadir}/gtk-doc
|
|
%dir %{_datadir}/gtk-doc/html
|
|
%doc %{_datadir}/gtk-doc/html/libqmi-glib/
|
|
%{_includedir}/libqmi-glib/
|
|
%{_libdir}/libqmi-glib.so
|
|
%{_libdir}/pkgconfig/qmi-glib.pc
|
|
|
|
%changelog
|