- Update to version 0.8.6+10+suse.47711374:
* Github workflows: add CI for SUSE-specific branches
- Disabled LTO for multipath-tools
* The test for is_valid_path fails if LTO is enabled, just
disabling it for %check is insufficient.
- Update to version 0.8.6+9+suse.6c05a61:
Update to upstream 0.8.6.
* add eh_deadline option to avoid endless SCSI error handling
* add wwid_recheck option to detect storage configuration changes
* add library versioning for libmultipath, libmpathpersist etc. and
to libmultipath plugins
* move some global symbols to libmultipath (udev, logsink, etc)
and provide default implementations for get_multipath_config() etc.
This allows simplifiying libmpathpersist_example.c drastically.
* fixes for shutdown issues and various race conditions on exit
* improve cleanup on exit, fix memory leaks
* add libmpathvalid library
* fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
* Avoid access to root FS while queueing IO (bsc#1178049,
bsc#1181234)
* lots of bug fixes, additions to built-in hardware table, and
CI improvements (bsc#1186212)
* kpartx: free loop device after listing partitions (boo#1107187)
Bug fixes on top of 0.8.5 mentioned below are also included in
this upstream version.
(bsc#1182072, bsc#1177371)
(bsc#1181435, bsc#1183666)
OBS-URL: https://build.opensuse.org/request/show/894131
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=253
- Update to version 0.8.4+192+suse.1bc10ad:
* Fix handling of hardware properties for maps without paths
(bsc#1176644)
- Update to version 0.8.4+190+suse.fe234ea:
* Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439)
- multipathd: allow shutdown during configure()
* fix compilation of external programs with -lmultipath
(bsc#1133957, necessary after the above fix)
* Minor upstream fixes
OBS-URL: https://build.opensuse.org/request/show/835004
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=230
- Update to version 0.8.4+31+suse.8f53764:
* Fix sporadic build failures caused by missing build dependencies
- Update to version 0.8.4+29+suse.c27ed8d:
* multipath-tools: Makefile.inc: set -Wno-error=clobbered
* Makefile.inc: keep warning flags during rpm build
* Eliminate compiler warnings on 32bit build.
* Fixes for tests under i586
- Spec file: add %check section to run multipath-tools CI
* not on SLE12, as cmocka is missing
* add build dependency on cmocka for building tests
* run "make test" with parallel make
- Update to version 0.8.4+19+suse.48fc2f4:
* multipath: add "-e" option to enable foreign libraries
* libmultipath: set "enable_foreign" to NONE by default
* deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
(included in factory git repo now).
* Makefile: dependency fixes for parallel build
- Get rid of %is_opensuse:
* drop build workaround for Leap 42.1
* build libdmmp for everything except SLE12/Leap42 and older
- Other spec file updates:
* use %make_build to speed up build (possible with 0.8.4)
- Migrated to .obscpio format.
- Update to version 0.8.4+16+suse.f319f7ea
- Changed github workflow back from merge-based to rebase-based.
This makes it much easier to assess differences between upstream
and SUSE code.
OBS-URL: https://build.opensuse.org/request/show/803707
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=212
- Update to version 0.8.1+28+suse.fea562a:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don't reset prio for
inaccessible paths (bsc#1118495)
- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation
* various minor fixes (coverity)
* libmultipath: hwtable: add Lenovo DE series (bsc#1125507)
OBS-URL: https://build.opensuse.org/request/show/711931
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=195
- Disable kmod() style dependencies again (bsc#1119414)
* For TW, dependencies will be autogenerated
(gh#openSUSE/rpm-config-SUSE#3)
* For SLE, feature is currently rejected (jsc#SLE-3853)
- Update to version 0.8.1+8+suse.8c11498:
* Avoid deadlock situation during udev settle
(bsc#1131789, bsc#1125145)
- multipath -u: test socket connection in non-blocking mode
* Fix priority handling for offline paths
(bsc#1118495)
- Update to upstream 0.8.1
* Avoid device IO in "multipath -u" (bsc#1125145)
* multipathd: protect all access to running_state
(bsc##1110060, bsc#1110439)
* Improve handling of changed WWIDs and temporary failure
to obtain WWID. Option "disable_changed_wwids" is now ignored.
* Fixes for PATH_PENDING state handling (bsc#1125043)
OBS-URL: https://build.opensuse.org/request/show/699727
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=193
- Re-enable kmod-style dependencies for multipath-tools package
(bsc#1119414)
- Separate out libmpath0 (bsc#1119414)
- Spec file improvements
* Add Conflicts: for older multipath-tools to libmpath0
* Move license files to the libmpath0 package, which contains the
code with complex licensing. The executables are GPL-2.0 anyway.
* Remove bogus dependency of -devel package on device-mapper
* -devel package depends on libmpath0, not multipath-tools
* Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
(John Vandenberg <jayvdb@gmail.com>)
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from
%pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
- Update to version 0.8.0+17+suse.a28893f:
* Code-identical to 0.7.9+139+suse.ed9d450, except for new
version number
- Disable kmod() style dependencies for now, as they are causing
problems with image builds (bsc#1119414). They'd been active
for SLE15-SP1 only, anyway.
- _service: determine "tag offset" manually, the patch count
determined by git is far too high.
- Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
OBS-URL: https://build.opensuse.org/request/show/690443
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=189
- Add kmod(xyz) style dependencies for SLE15-SP1
(jsc#SLE-3853, fate#326579)
- Update to version 0.7.9+138+suse.0edd0a2:
- Include reviewed fixes from upstream
* libmutipath: continue to use old state on PATH_PENDING
* libmultipath: disable user_friendly_names for NetApp
* multipath: blacklist zram devices
* various fixes for martinal path code
* minor fixes suggested by coverity
- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG
(bsc#1127873)
OBS-URL: https://build.opensuse.org/request/show/681784
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=182
- Update to version 0.7.9+108+suse.3fd53bf:
* libmultipath: fix compilation with older kernel headers
(bsc#1121066)
- merged upstream fb824725
* Improved NVMe support in both native and dm-mpath mode
added basic NVMe ANA support (bsc#1119898)
* multipathd: fix daemon not really shutdown
(bsc##1110060, bsc#1110439)
- Update to version 0.7.9+90+suse.f81e290:
* libmultipath: Increase SERIAL_SIZE to 128 bytes
(bsc#1107179)
- Update to version 0.7.9+89+suse.df77b66:
- re-enable "san_path_err_xy" options
These have been removed upstream, but they were supported
in SLE-15/Leap15.0, so we can't simply throw them away.
Improve documentation, mark them as deprecated, but keep
the code in place.
OBS-URL: https://build.opensuse.org/request/show/663641
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=173
- Update to version 0.7.9+85+suse.766b95e:
* upstream patch series to make verbosity level 3
less verbose and thus better usable (bsc#1118937)
* fix for handling device size mismatch in coalesce_paths()
(bsc#1037379)
* libmultipath: fix false removes in dmevents polling code
(bsc#1116272)
* Spec file: remove build dependency on dracut which causes
build errors for some distributions
OBS-URL: https://build.opensuse.org/request/show/657556
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=170
- Update to version 0.7.9+58+suse.0790830:
* libmpathpersist: fix off-by-one error in PRIN length check
(bsc#1099007)
* multipathd: fix mpp->hwe handling when paths are freed
(fix possible crash caused by new hardware table code)
- Update to version 0.7.9+55+suse.9fc8439:
(note the "55" is due to former merge operations. We actually
only have 7 patches on top of upstream. All other patches
referenced below as "not upstream" have been merged).
* Bump version to 0.7.9
* multipathd: reset delay_wait_checks counter on failure
(bsc#1114771)
* multipathd: fix irritating "minor number mismatch" message
(bsc#1111116)
* fix posible failure to shut down (bsc#1110060, bsc#1110439)
* upstream "checker overhaul" - cleanups and improvements for
path checkers
* Upstream fixes for failures handling path initializiation
* various small upstream bug fixes.
OBS-URL: https://build.opensuse.org/request/show/652111
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=168
This fixes the problem with the previous submission
(missing Obsoletes: tag)
- Update to version 0.7.7+75+suse.6287aef:
Added minor updates from upstream
* multipath-tools: add info about how to enable ALUA in ONTAP
* multipath-tools: add directio path_checker for DASD devices
* multipath-tools: make Product Name mandatory and add all of them
Minor rebase, as some SUSE patches have been merged upstream
(all mentioned in previous changelogs)
- Update to version 0.7.7+72+suse.4b24466:
* multipath: fix return code handling in delegate_to_multipathd
(bsc#1098177)
* multipath: don't start multipathd unnecessarily
(bsc#1098177)
* added Obsoletes: for multipath-tools-rbd.
* libmultipath: Fix sgio_get_vpd() (bsc#1099484)
OBS-URL: https://build.opensuse.org/request/show/621304
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=164
- Update to version 0.7.7+70+suse.4a5941e:
* libmultipath: change partition_delimiter default to "-part"
(bsc#1073622, bsc#1056526)
* change default for find_multipaths to "greedy" (bsc#1099054)
* libmultipath: allow distributions to change partition_delim default
(bsc#1073622, bsc#1056526)
- Update to version 0.7.7+67+suse.a7d1e14:
- RBD/RADOS backend support has been removed upstream
remove support for it in openSUSE, too (boo#1099037)
- libdmmp version has changed to 0.2.0
- New patches not yet upstream:
* multipathd: fix mpp->hwe handling on path removal (boo#1099028)
* libmultipath: print correct default for delay_*_checks (boo#1099026)
* libmultipath: avoid error messages from RDAC check (bsc#1075539)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
(bsc#1099007)
* multipathd: fix buffer size in cli_getprkey (bsc#1099028)
* libmultipath: fix gcc 8.1 "truncated output" warnings
(bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus
(bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus
(bsc#1099007)
- SUSE specific patches preserved:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
OBS-URL: https://build.opensuse.org/request/show/619018
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=163
- No functional changes, just licenses
- Spec file: fix %license tags and info after closer inspection
(bsc#1088801)
* kpartx is under GPL-2.0-only
* rbd is under LGPL-2.1-only
- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
* Added fossology assessment as README.licenses
* multipath-tools: create LICENSES dir with the text of all used licences
- Update to version 0.7.3+61+suse.d4d0494:
* 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
(bsc#1084748)
OBS-URL: https://build.opensuse.org/request/show/595137
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=159
- Update to version 0.7.3+10+suse.70ccb55b0439:
- Rebase to upstream release 0.7.3
* libmultipath: add pthread_cleanup hook for udev monitor
* libmultipath: pull functions into util.c
* libmultipath: change reservation_key to a be64
* libmpathpersist: fix update_prflag code
* multipath: add alternate reservation_key method
* mpathpersist: add support for prkeys file
* multipath-tools: minor edition and corrections in multipath.conf.5
* multipath-tools: fix incorrect length for strncmp in uevent.c
* multipath-tools: clarify how to dump the multipathd config
* multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
* libmultipath: sanitize fd handling
* multipath-tools: link internal libraries before foreigns
* multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
* multipath-tools: add support for all arrays from Sun StorEdge 3000 family
* multipath-tools: add Xiotech iglu blaze arrays to hwtable
* multipath-tools: add Dot Hill/Seagate arrays to hwtable
* libmultipath: update INFINIDAT builtin config
* multipath-tools: add info about adding new hardware
* multipath-tools: Remove the limitation of IPC command reply length.
* multipath-tools: libdmmp: Improve timeout mechanism
* multipath-tools: libdmmp: New function to flush and reconfig
* Bump version to 0.7.3
- minor fixes for upstream 0.7.3
* libmultipath: ensure checker->fd == -1 if not set
* libmpathpersist: add support for prkeys file v3
* multipath: add man page info for my prkey changes
- Patch series for NVMe discovery and failover (bsc#1038865)
* discovery: sanitize NVMe discovery
OBS-URL: https://build.opensuse.org/request/show/528058
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=134
- Update to version 0.7.2+44.3a8d750c:
Misc bug fixes:
* multipathd: don't flood system with sd_notify calls (bsc#1056011)
* libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
* libmultipath: add_feature: allow only 1 feature (bsc#1055635)
* multipath: delegate dangerous commands to multipathd (bsc#1047639)
* libmultipath: fix partition_delimiter config option (bsc#1056526)
* kpartx: helper functions for name and uuid generation (bsc#1056508)
* kpartx: search partitions by UUID, and rename (bsc#1056508)
* kpartx: fix a corner case when renaming partitions (bsc#1056508)
* kpartx: -d must work with empty partition table (boo#1056599)
* kpartx: only recognize dasd part table on DASD (boo#1056599)
Rework of the udev rules related to multipath and kpartx (bsc#1054363):
* libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
* libmultipath: add get_udev_device
* libmultipath: get_refwwid: use get_udev_device
* libmultipath: use const char* in some dm helpers
* libmultipath: add DI_NOIO flag for pathinfo
* libmultipath: add dm_get_multipath
* multipath: implement "check usable paths" (-C/-U)
* 11-dm-mpath.rules: multipath -U for READY check
* 11-dm-mpath.rules: import more ID_FS_xxx vars from db
* 11-dm-mpath.rules: no need to test before IMPORT
* 11-dm-mpath.rules: handle new maps with READY==0
* 11-dm-mpath.rules: don't set READY->ACTIVATION
* 11-dm-mpath.rules: Remember DM_ACTIVATION
* multipath.rules: set ID_FS_TYPE to "mpath_member"
* kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
* kpartx.rules: improved logic for by-uuid and by-label links
OBS-URL: https://build.opensuse.org/request/show/520380
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=132
- Update to version 0.7.2+11+suse.448921a2:
* multipath.conf.5: document no_partitions compat support
* libmultipath: fixup compat support for 'features "1 no_partitions"'
- Dropped 67-kpartx-compat.rules (SUSE legacy).
* symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
only "/dev/mapper/${UUID}-part${X}" (with "minus")
- Dropped automatic kpartx invocation on dmraid devices (fate#323743)
- Rebase to upstream multipath-tools 0.7.2:
- Update to version 0.7.2+8+suse.95e8f43e:
OBS-URL: https://build.opensuse.org/request/show/516239
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=130
- Rebase to upstream multipath-tools 0.7.2.
- Drop 67-kpartx-compat.rules
- Update to version 0.7.2+8+suse.95e8f43e:
* libmultipath: retain_attached_hw_handler obsolete with 4.3+
* multipath-tools: move up TEMPLATE in hwtable
* multipath-tools: delete libdmmp/docs/man directory in make clean
* libmultipath: fix unit to seconds in log message for checker timeout
* multipath-tools: add HPE StoreVirtual 3200 family to hwtable
* multipath-tools: add HPE MSA 2050/2052 to hwtable
* multipath-tools: add/change fujitsu arrays
* multipath-tools: check sysfs path state for NVMe/NVMf
* multipath-tools: sync third-party headers with 3.13 upstream
* multipath-tools: beautify path_latency.c code
* multipath-tools: fix format in multipath.conf.5
* libmultipath: update 3PARdata builtin config
* Bump version to 0.7.2
* libmultipath: don't try to set hwhandler if it is retained
(bsc#1037533)
* libmultipath: don't [un]set queue_if_no_path after domap
* kpartx/devmapper.h: remove dm_no_partitions
* libmultipath: compat support for 'features "1 no_partitions"'
(fate#323406)
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
(bsc#1047180)
* kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
* kpartx.rules: skip creating by-uuid and by-label links
(fate#32340)
- Update to version 0.7.1+69+suse.3bfa5af1:
* Merge branch 'sles12-sp3-fixes' into sles12-sp3
OBS-URL: https://build.opensuse.org/request/show/516121
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=129
- Update to version 0.7.1+62+suse.7fd2387b:
* Revert "kpartx: use mapname if no uuid is present"
(bsc#1037533, bsc#1033541)
- "no_path_retry" patch series (bsc#1043027)
* libmultipath: load_config: skip setting unnecessary defaults
* libmultipath: add/remove_feature: use const char* for feature
* libmultipath: clarify option conflicts for "features"
* libmultipath: merge_hwe: fix queue_if_no_path logic
* libmultipath: assemble_map: fix queue_if_no_path logic
* multipath.conf.5: document no_path_retry vs. queue_if_no_path
* multipath.conf.5: Remove ??? and other minor fixes
* libmultipath: add deprecated warning for some features settings
- _service: Use "sles12-sp3" branch as revision, as factory
and SLE12-SP3 submissions are in sync. Will be changed when
factory forks off (latest at SLE12-SP3 GA).
OBS-URL: https://build.opensuse.org/request/show/505512
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=126
- Update to version 0.7.1+53+suse.07c2f6ac:
Merged upstream fixes:
* multipath: Merge the DELL MD3xxx device configs
* multipath: fix up position independent code
* libmultipath: fix partition detection
* kpartx: default to running in sync mode
* libmultipath: force udev reloads
* kpartx: only check for 'no_partitions' feature on dm devices
* kpartx: test-kpartx: new unit test program
* kpartx: remove is_loop_device
* kpartx: relax and improve UUID check in dm_compare_uuid
* kpartx: dm_remove_partmaps: support non-dm devices
* kpartx: dm_devn: return error for non-existent device
* kpartx: don't treat multi-linear mappings as partitions
* libmultipath: don't treat multi-linear mappings as partitions
* kpartx: use partition UUID for non-DM devices
* kpartx: use absolute path for regular files
* kpartx: find_loop_by_file: use sysfs
* kpartx: include sys/sysmacros.h
* libmultipath: print.c: make sure lines are 0-terminated
* multipath-tools: fix compilation with gcc < 4.9
* libmultipath: print alias with no_path_retry message
* multipathd: force reload device on all resizes
* libmultipath: refactor calls to get dm device info
* libmultipath: fix suspended devs from failed reloads
* kpartx: fix device checks
* mpath_persist: Don't join threads that don't exist
* multipath-tools: document uid_attribute for NVME devices
* Makefile: Remove assignments to unused variables
OBS-URL: https://build.opensuse.org/request/show/503640
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=122
---------------------------------------------------------------------
- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
- spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
- Update to version 0.7.1+7+suse.3edc5f7d:
* kpartx: use mapname if no uuid is present (bsc#1033541)
* kpartx: relax check when checking for a kpartx device (bsc#1033541)
* libmpathpersist: use extern struct udev (bsc#1027188)
* kpartx: include sys/sysmacros.h (fix compilation warning)
- Update to upstream version 0.7.1:
* multipath-tools: improve processing efficiency for addition and deletion of multipath devices
* uevent_can_discard: optimize devpath check
* multipathd: fix SIGUSR2 handling
* multipath-tools: clean up libdmmp/Makefile
* multipath-tools: libdmmp: Fix incorrect use of __attribute__
* multipath-tools: Remove trailing whitespaces
* multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
* multipath-tools: build objects for libdmmp and libmpathpersist independently
* libdmmp: minor Makefile cleanup
* multipath-tools: remove incdir from Makefiles
* libdmmp: don't disconnect from multipathd twice
* multipathd: don't call strlen on NULL variables
* libdmmp: move libdmmp.pc install location
* multipathd: drop lock before calling uev_add_path
* multipathd: allow devices to switch from RW to RO
* libmultipath: don't set max_sectors_kb on reloads
* Remove a trailing tab
* multipath: fix segfault with disable_changed_wwids
* multipath-tools: amend text from multipath/multipath.conf.5
* Bump the version code and date
* multipath-tools: replace multipath configuration output
OBS-URL: https://build.opensuse.org/request/show/491762
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=120
- Update to version 0.6.4+103+suse.bcb5d0f4:
* changed to official github repo openSUSE/multipath-tools
(no changes code-wise)
- Spec file: Added dependency on sg3_utils (#boo1028857)
- spec file changes: optional librados and libdmmp support
* enabled by default on Factory and Leap
(disable with --without-rados, --without-libdmmp)
* disabled by default on SLES12
(enable with --with-rados, --with-libdmmp)
* libdmmp0_1_0 and libdmmp-devel as separate packages
* minor fixes for RPMLINT warnings
- Update to version 0.6.4+102.0119472d:
* rebased, code-wise identical to previous checkout
- Update to version 0.6.4+102.df7d367e:
* libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
(bsc#1004858)
- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
* Make libdmmp build optional
* multipath.rules: use -i flag to multipath
* kpartx: create symlinks for dmraid devices
* kpartx: Add udev compability rules for SUSE
* libmultipath/checkers: make RADOS checker optional
* multipathd: fixup check for new path states (bsc#1019798)
* tur: Add pthread_testcancel() (bsc#101979)
* kpartx: sanitize delete partitions (bsc#100869)
* libmultipath: coalesce_paths: trigger uevent if nothing done
OBS-URL: https://build.opensuse.org/request/show/478509
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=114
- Include fixes from upstream:
* memory leak in orphan_paths
* More hardware table cleanups
* Add 'serial' keyword to weightedpath prioritizer
- Set timeout for CLI commands correctly (bsc#990265)
- Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
- multipathd.service: Fixup Wants= and Before= statements
(bsc#991742, bsc#986734)
- Include patches from upstream:
* Cleanup hardware tables by removing default entries
* More formatting fixes
* Order keywords in multipath.conf.5
* Change default pgpolicy from 'failover' to 'group_by_prio'
* kpartx: Fix check whether to detach a loop device
* Fix partly traversed loop in coalesce_paths()
* Fix memory leak in reconfigure()
* Cleanup include header files
* Bump version code to 0.6.2
- Fix multipath -l <devmap> without output (bsc#990480)
- Fix spelling in a log message
- Fix type of rcu_unregister()
- Do not perform POSIX mutex operations inside a signal handler
- Ensure that signals are delivered to the uxsock thread
- Fix memory leak in path group policies
- Update tarball to 0.6.2+suse20160728.d96f423
OBS-URL: https://build.opensuse.org/request/show/417043
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=102
