- Enhanced SELinux functionality. Added Fedora patches:
* openssh-7.8p1-role-mls.patch
Proper handling of MLS systems and basis for other SELinux
improvements
* openssh-6.6p1-privsep-selinux.patch
Properly set contexts during privilege separation
* openssh-6.6p1-keycat.patch
Add ssh-keycat command to allow retrival of authorized_keys
on MLS setups with polyinstantiation
* openssh-6.6.1p1-selinux-contexts.patch
Additional changes to set the proper context during privilege
separation
* openssh-7.6p1-cleanup-selinux.patch
Various changes and putting the pieces together
For now we don't ship the ssh-keycat command, but we need the patch
for the other SELinux infrastructure
This change fixes issues like bsc#1214788, where the ssh daemon
needs to act on behalf of a user and needs a proper context for this
OBS-URL: https://build.opensuse.org/request/show/1123220
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=252
- Update to openssh 9.3p2
* No changes for askpass, see main package changelog for
details
- Update to openssh 9.3p2 (bsc#1213504, CVE-2023-38408):
Security
========
Fix CVE-2023-38408 - a condition where specific libaries loaded via
ssh-agent(1)'s PKCS#11 support could be abused to achieve remote
code execution via a forwarded agent socket if the following
conditions are met:
* Exploitation requires the presence of specific libraries on
the victim system.
* Remote exploitation requires that the agent was forwarded
to an attacker-controlled system.
Exploitation can also be prevented by starting ssh-agent(1) with an
empty PKCS#11/FIDO allowlist (ssh-agent -P '') or by configuring
an allowlist that contains only specific provider libraries.
This vulnerability was discovered and demonstrated to be exploitable
by the Qualys Security Advisory team.
In addition to removing the main precondition for exploitation,
this release removes the ability for remote ssh-agent(1) clients
to load PKCS#11 modules by default (see below).
Potentially-incompatible changes
--------------------------------
* ssh-agent(8): the agent will now refuse requests to load PKCS#11
modules issued by remote clients by default. A flag has been added
to restore the previous behaviour "-Oallow-remote-pkcs11".
Note that ssh-agent(8) depends on the SSH client to identify
requests that are remote. The OpenSSH >=8.9 ssh(1) client does
this, but forwarding access to an agent socket using other tools
may circumvent this restriction.
OBS-URL: https://build.opensuse.org/request/show/1099810
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=249
- Update to openssh 9.3p1
* No changes for askpass, see main package changelog for
details
- Update to openssh 9.3p1:
= Security
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in
OpenSSH 8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This
problem was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the
system's standard library lacks this function and portable
OpenSSH was not compiled with the ldns library (--with-ldns).
getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to
fetch SSHFP records. This problem was found by the Coverity
static analyzer.
= New features
* ssh-keygen(1), ssh-keyscan(1): accept -Ohashalg=sha1|sha256
when outputting SSHFP fingerprints to allow algorithm
selection. bz3493
OBS-URL: https://build.opensuse.org/request/show/1087770
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=247
- Version update to 8.9p1:
= Security
* sshd(8): fix an integer overflow in the user authentication path
that, in conjunction with other logic errors, could have yielded
unauthenticated access under difficult to exploit conditions.
This situation is not exploitable because of independent checks in
the privilege separation monitor. Privilege separation has been
enabled by default in since openssh-3.2.2 (released in 2002) and
has been mandatory since openssh-7.5 (released in 2017). Moreover,
portable OpenSSH has used toolchain features available in most
modern compilers to abort on signed integer overflow since
openssh-6.5 (released in 2014).
Thanks to Malcolm Stagg for finding and reporting this bug.
= Potentially-incompatible changes
* sshd(8), portable OpenSSH only: this release removes in-built
support for MD5-hashed passwords. If you require these on your
system then we recommend linking against libxcrypt or similar.
* This release modifies the FIDO security key middleware interface
and increments SSH_SK_VERSION_MAJOR.
= New features
* ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for
restricting forwarding and use of keys added to ssh-agent(1)
A detailed description of the feature is available at
https://www.openssh.com/agent-restrict.html and the protocol
extensions are documented in the PROTOCOL and PROTOCOL.agent
files in the source release.
* ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid
ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the
default KEXAlgorithms list (after the ECDH methods but before the
prime-group DH ones). The next release of OpenSSH is likely to
make this key exchange the default method.
* ssh-keygen(1): when downloading resident keys from a FIDO token,
pass back the user ID that was used when the key was created and
append it to the filename the key is written to (if it is not the
default). Avoids keys being clobbered if the user created multiple
resident keys with the same application string but different user
IDs.
* ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys
on tokens that provide user verification (UV) on the device itself,
including biometric keys, avoiding unnecessary PIN prompts.
* ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to
perform matching of principals names against an allowed signers
file. To be used towards a TOFU model for SSH signatures in git.
* ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added
to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at
authentication time.
* ssh-keygen(1): allow selection of hash at sshsig signing time
(either sha512 (default) or sha256).
* ssh(1), sshd(8): read network data directly to the packet input
buffer instead of indirectly via a small stack buffer. Provides a
modest performance improvement.
* ssh(1), sshd(8): read data directly to the channel input buffer,
providing a similar modest performance improvement.
* ssh(1): extend the PubkeyAuthentication configuration directive to
accept yes|no|unbound|host-bound to allow control over one of the
protocol extensions used to implement agent-restricted keys.
= Bugfixes
* sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and
PubkeyAuthOptions can be used in a Match block. PR277.
* sshd(8): fix possible string truncation when constructing paths to
.rhosts/.shosts files with very long user home directory names.
* ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512
exchange hashes
* ssh(1): don't put the TTY into raw mode when SessionType=none,
avoids ^C being unable to kill such a session. bz3360
* scp(1): fix some corner-case bugs in SFTP-mode handling of
~-prefixed paths.
* ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to
select RSA keys when only RSA/SHA2 signature algorithms are
configured (this is the default case). Previously RSA keys were
not being considered in the default case.
* ssh-keysign(1): make ssh-keysign use the requested signature
algorithm and not the default for the key type. Part of unbreaking
hostbased auth for RSA/SHA2 keys.
* ssh(1): stricter UpdateHostkey signature verification logic on
the client- side. Require RSA/SHA2 signatures for RSA hostkeys
except when RSA/SHA1 was explicitly negotiated during initial
KEX; bz3375
* ssh(1), sshd(8): fix signature algorithm selection logic for
UpdateHostkeys on the server side. The previous code tried to
prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some
cases. This will use RSA/SHA2 signatures for RSA keys if the
client proposed these algorithms in initial KEX. bz3375
* All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2).
This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1)
and sftp-server(8), as well as the sshd(8) listen loop and all
other FD read/writability checks. On platforms with missing or
broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is
available.
* ssh-keygen(1): the "-Y find-principals" command was verifying key
validity when using ca certs but not with simple key lifetimes
within the allowed signers file.
* ssh-keygen(1): make sshsig verify-time argument parsing optional
* sshd(8): fix truncation in rhosts/shosts path construction.
* ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA
keys (we already did this for RSA keys). Avoids fatal errors for
PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B
"cryptoauthlib"; bz#3364
* ssh(1), ssh-agent(1): improve the testing of credentials against
inserted FIDO: ask the token whether a particular key belongs to
it in cases where the token supports on-token user-verification
(e.g. biometrics) rather than just assuming that it will accept it.
Will reduce spurious "Confirm user presence" notifications for key
handles that relate to FIDO keys that are not currently inserted in at
least some cases. bz3366
* ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to
allow for the preceding two ECN bits. bz#3373
* ssh-keygen(1): add missing -O option to usage() for the "-Y sign"
option.
* ssh-keygen(1): fix a NULL deref when using the find-principals
function, when matching an allowed_signers line that contains a
namespace restriction, but no restriction specified on the
command-line
* ssh-agent(1): fix memleak in process_extension(); oss-fuzz
issue #42719
* ssh(1): suppress "Connection to xxx closed" messages when LogLevel
is set to "error" or above. bz3378
* ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing
compressed packet data. bz3372
* scp(1): when recursively transferring files in SFTP mode, create the
destination directory if it doesn't already exist to match scp(1) in
legacy RCP mode behaviour.
* scp(1): many improvements in error message consistency between scp(1)
in SFTP mode vs legacy RCP mode.
* sshd(8): fix potential race in SIGTERM handling PR289
* ssh(1), ssh(8): since DSA keys are deprecated, move them to the
end of the default list of public keys so that they will be tried
last. PR295
* ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match
wildcard principals in allowed_signers files
= Portability
* ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's
implementation does not work in a chroot when the kernel does not
have close_range(2). It tries to read from /proc/self/fd and when
that fails dies with an assertion of sorts. Instead, call
close_range(2) directly from our compat code and fall back if
that fails. bz#3349,
* OS X poll(2) is broken; use compat replacement. For character-
special devices like /dev/null, Darwin's poll(2) returns POLLNVAL
when polled with POLLIN. Apparently this is Apple bug 3710161 -
not public but a websearch will find other OSS projects
rediscovering it periodically since it was first identified in
2005.
* Correct handling of exceptfds/POLLPRI in our select(2)-based
poll(2)/ppoll(2) compat implementation.
* Cygwin: correct checking of mbstowcs() return value.
* Add a basic SECURITY.md that refers people to the openssh.com
website.
* Enable additional compiler warnings and toolchain hardening flags,
including -Wbitwise-instead-of-logical, -Wmisleading-indentation,
-fzero-call-used-regs and -ftrivial-auto-var-init.
* HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version
is not reliable.
- Rebased patches:
* openssh-7.7p1-ldap.patch
* openssh-8.0p1-gssapi-keyex.patch
* openssh-8.1p1-audit.patch
* openssh-8.4p1-vendordir.patch
* openssh-reenable-dh-group14-sha1-default.patch
OBS-URL: https://build.opensuse.org/request/show/960041
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
- Version upgrade to 8.8p1
* No changes for askpass, see main package changelog for
details
- Version update to 8.8p1:
= Security
* sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise
supplemental groups when executing an AuthorizedKeysCommand or
AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or
AuthorizedPrincipalsCommandUser directive has been set to run the
command as a different user. Instead these commands would inherit
the groups that sshd(8) was started with.
Depending on system configuration, inherited groups may allow
AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to
gain unintended privilege.
Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are
enabled by default in sshd_config(5).
= Potentially-incompatible changes
* This release disables RSA signatures using the SHA-1 hash algorithm
by default. This change has been made as the SHA-1 hash algorithm is
cryptographically broken, and it is possible to create chosen-prefix
hash collisions for <USD$50K.
For most users, this change should be invisible and there is
no need to replace ssh-rsa keys. OpenSSH has supported RFC8332
RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys
will automatically use the stronger algorithm where possible.
Incompatibility is more likely when connecting to older SSH
implementations that have not been upgraded or have not closely tracked
improvements in the SSH protocol. For these cases, it may be necessary
to selectively re-enable RSA/SHA1 to allow connection and/or user
authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms
options.
= New features
* ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs
directive to accept a "none" argument to specify the default
behaviour.
= Bugfixes
* scp(1): when using the SFTP protocol, continue transferring files
after a transfer error occurs, better matching original scp/rcp
behaviour.
* ssh(1): fixed a number of memory leaks in multiplexing,
* ssh-keygen(1): avoid crash when using the -Y find-principals
command.
* A number of documentation and manual improvements, including
bz#3340, PR139, PR215, PR241, PR257
- Additional changes from 8.7p1 release:
= Potentially-incompatible changes
* scp(1): this release changes the behaviour of remote to remote
copies (e.g. "scp host-a:/path host-b:") to transfer through the
local host by default. This was previously available via the -3
flag. This mode avoids the need to expose credentials on the
origin hop, avoids triplicate interpretation of filenames by the
shell (by the local system, the copy origin and the destination)
and, in conjunction with the SFTP support for scp(1) mentioned
below, allows use of all authentication methods to the remote
hosts (previously, only non-interactive methods could be used).
A -R flag has been added to select the old behaviour.
* ssh(1)/sshd(8): both the client and server are now using a
stricter configuration file parser. The new parser uses more
shell-like rules for quotes, space and escape characters. It is
also more strict in rejecting configurations that include options
lacking arguments. Previously some options (e.g. DenyUsers) could
appear on a line with no subsequent arguments. This release will
reject such configurations. The new parser will also reject
configurations with unterminated quotes and multiple '='
characters after the option name.
* ssh(1): when using SSHFP DNS records for host key verification,
ssh(1) will verify all matching records instead of just those
with the specific signature type requested. This may cause host
key verification problems if stale SSHFP records of a different
or legacy signature type exist alongside other records for a
particular host. bz#3322
* ssh-keygen(1): when generating a FIDO key and specifying an
explicit attestation challenge (using -Ochallenge), the challenge
will now be hashed by the builtin security key middleware. This
removes the (undocumented) requirement that challenges be exactly
32 bytes in length and matches the expectations of libfido2.
* sshd(8): environment="..." directives in authorized_keys files are
now first-match-wins and limited to 1024 discrete environment
variable names.
= New features
* scp(1): experimental support for transfers using the SFTP protocol
as a replacement for the venerable SCP/RCP protocol that it has
traditionally used. SFTP offers more predictable filename handling
and does not require expansion of glob(3) patterns via the shell
on the remote side.
* sftp-server(8): add a protocol extension to support expansion of
~/ and ~user/ prefixed paths. This was added to support these
paths when used by scp(1) while in SFTP mode.
* ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to
the ssh(1) -f flag. GHPR231
* ssh(1): add a StdinNull directive to ssh_config(5) that allows the
config file to do the same thing as -n does on the ssh(1) command-
line. GHPR231
* ssh(1): add a SessionType directive to ssh_config, allowing the
configuration file to offer equivalent control to the -N (no
session) and -s (subsystem) command-line flags. GHPR231
* ssh-keygen(1): allowed signers files used by ssh-keygen(1)
signatures now support listing key validity intervals alongside
they key, and ssh-keygen(1) can optionally check during signature
verification whether a specified time falls inside this interval.
This feature is intended for use by git to support signing and
verifying objects using ssh keys.
* ssh-keygen(8): support printing of the full public key in a sshsig
signature via a -Oprint-pubkey flag.
= Bugfixes
* ssh(1)/sshd(8): start time-based re-keying exactly on schedule in
the client and server mainloops. Previously the re-key timeout
could expire but re-keying would not start until a packet was sent
or received, causing a spin in select() if the connection was
quiescent.
* ssh-keygen(1): avoid Y2038 problem in printing certificate
validity lifetimes. Dates past 2^31-1 seconds since epoch were
displayed incorrectly on some platforms. bz#3329
* scp(1): allow spaces to appear in usernames for local to remote
and scp -3 remote to remote copies. bz#1164
* ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication
in favour of KbdInteractiveAuthentication. The former is what was in
SSHv1, the latter is what is in SSHv2 (RFC4256) and they were
treated as somewhat but not entirely equivalent. We retain the old
name as a deprecated alias so configuration files continue to work
as well as a reference in the man page for people looking for it.
bz#3303
* ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name
when extracting a key from a PKCS#11 certificate. bz#3327
* ssh(1): restore blocking status on stdio fds before close. ssh(1)
needs file descriptors in non-blocking mode to operate but it was
not restoring the original state on exit. This could cause
problems with fds shared with other programs via the shell,
bz#3280 and GHPR246
* ssh(1)/sshd(8): switch both client and server mainloops from
select(3) to pselect(3). Avoids race conditions where a signal
may arrive immediately before select(3) and not be processed until
an event fires. bz#2158
* ssh(1): sessions started with ControlPersist were incorrectly
executing a shell when the -N (no shell) option was specified.
bz#3290
* ssh(1): check if IPQoS or TunnelDevice are already set before
overriding. Prevents values in config files from overriding values
supplied on the command line. bz#3319
* ssh(1): fix debug message when finding a private key to match a
certificate being attempted for user authentication. Previously it
would print the certificate's path, whereas it was supposed to be
showing the private key's path. GHPR247
* sshd(8): match host certificates against host public keys, not
private keys. Allows use of certificates with private keys held in
a ssh-agent. bz#3524
* ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which
allows RSA/SHA2 signatures for public key authentication but fails
to advertise this correctly via SSH2_MSG_EXT_INFO. This causes
clients of these server to incorrectly match
PubkeyAcceptedAlgorithmse and potentially refuse to offer valid
keys. bz#3213
* sftp(1)/scp(1): degrade gracefully if a sftp-server offers the
limits@openssh.com extension but fails when the client tries to
invoke it. bz#3318
* ssh(1): allow ssh_config SetEnv to override $TERM, which is
otherwise handled specially by the protocol. Useful in ~/.ssh/config
to set TERM to something generic (e.g. "xterm" instead of
"xterm-256color") for destinations that lack terminfo entries.
* sftp-server(8): the limits@openssh.com extension was incorrectly
marked as an operation that writes to the filesystem, which made it
unavailable in sftp-server read-only mode. bz#3318
* ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when
the update removed more host keys than remain present.
* Many manual page fixes.
- Additional changes from 8.6p1 release:
= Security
* sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this
option was enabled with a set of patterns that activated logging
in code that runs in the low-privilege sandboxed sshd process, the
log messages were constructed in such a way that printf(3) format
strings could effectively be specified the low-privilege code.
= New features
* sftp-server(8): add a new limits@openssh.com protocol extension
that allows a client to discover various server limits, including
maximum packet size and maximum read/write length.
* sftp(1): use the new limits@openssh.com extension (when available)
to select better transfer lengths in the client.
* sshd(8): Add ModuliFile keyword to sshd_config to specify the
location of the "moduli" file containing the groups for DH-GEX.
* unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to
enable printing of the elapsed time in seconds of each test.
= Bugfixes
* ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in
manual pages with the current default. GHPR174
* ssh(1): ensure that pkcs11_del_provider() is called before exit.
GHPR234
* ssh(1), sshd(8): fix problems in string->argv conversion. Multiple
backslashes were not being dequoted correctly and quoted space in
the middle of a string was being incorrectly split. GHPR223
* ssh(1): return non-zero exit status when killed by signal; bz#3281
* sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum
packet size. Also handle zero-length reads that are not explicitly
banned by the spec.
- Additional changes from 8.5p1 release:
= Security
* ssh-agent(1): fixed a double-free memory corruption that was
introduced in OpenSSH 8.2 . We treat all such memory faults as
potentially exploitable. This bug could be reached by an attacker
with access to the agent socket.
= Potentially-incompatible changes
* ssh(1), sshd(8): this release changes the first-preference signature
algorithm from ECDSA to ED25519.
* ssh(1), sshd(8): set the TOS/DSCP specified in the configuration
for interactive use prior to TCP connect. The connection phase of
the SSH session is time-sensitive and often explicitly interactive.
The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
* ssh(1), sshd(8): remove the pre-standardization cipher
rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before
it was standardized in RFC4253 (2006), has been deprecated and
disabled by default since OpenSSH 7.2 (2016) and was only briefly
documented in ssh.1 in 2001.
* ssh(1), sshd(8): update/replace the experimental post-quantum
hybrid key exchange method based on Streamlined NTRU Prime coupled
with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org
method is replaced with sntrup761x25519-sha512@openssh.com.
* ssh(1): disable CheckHostIP by default. It provides insignificant
benefits while making key rotation significantly more difficult,
especially for hosts behind IP-based load-balancers.
= New features
* ssh(1): this release enables UpdateHostkeys by default subject to
some conservative preconditions:
- The key was matched in the UserKnownHostsFile (and not in the
GlobalKnownHostsFile).
- The same key does not exist under another name.
- A certificate host key is not in use.
- known_hosts contains no matching wildcard hostname pattern.
- VerifyHostKeyDNS is not enabled.
- The default UserKnownHostsFile is in use.
* ssh(1), sshd(8): add a new LogVerbose configuration directive for
that allows forcing maximum debug logging by file/function/line
pattern-lists.
* ssh(1): when prompting the user to accept a new hostkey, display
any other host names/addresses already associated with the key.
* ssh(1): allow UserKnownHostsFile=none to indicate that no
known_hosts file should be used to identify host keys.
* ssh(1): add a ssh_config KnownHostsCommand option that allows the
client to obtain known_hosts data from a command in addition to
the usual files.
* ssh(1): add a ssh_config PermitRemoteOpen option that allows the
client to restrict the destination when RemoteForward is used
with SOCKS.
* ssh(1): for FIDO keys, if a signature operation fails with a
"incorrect PIN" reason and no PIN was initially requested from the
user, then request a PIN and retry the operation. This supports
some biometric devices that fall back to requiring PIN when reading
of the biometric failed, and devices that require PINs for all
hosted credentials.
* sshd(8): implement client address-based rate-limiting via new
sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
directives that provide more fine-grained control on a per-origin
address basis than the global MaxStartups limit.
= Bugfixes
* ssh(1): Prefix keyboard interactive prompts with "(user@host)" to
make it easier to determine which connection they are associated
with in cases like scp -3, ProxyJump, etc. bz#3224
* sshd(8): fix sshd_config SetEnv directives located inside Match
blocks. GHPR201
* ssh(1): when requesting a FIDO token touch on stderr, inform the
user once the touch has been recorded.
* ssh(1): prevent integer overflow when ridiculously large
ConnectTimeout values are specified, capping the effective value
(for most platforms) at 24 days. bz#3229
* ssh(1): consider the ECDSA key subtype when ordering host key
algorithms in the client.
* ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
PubkeyAcceptedAlgorithms. The previous name incorrectly suggested
that it control allowed key algorithms, when this option actually
specifies the signature algorithms that are accepted. The previous
name remains available as an alias. bz#3253
* ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
* sftp-server(8): add missing lsetstat@openssh.com documentation
and advertisement in the server's SSH2_FXP_VERSION hello packet.
* ssh(1), sshd(8): more strictly enforce KEX state-machine by
banning packet types once they are received. Fixes memleak caused
by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
* sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
platforms instead of being limited by LONG_MAX. bz#3206
* Minor man page fixes (capitalization, commas, etc.) bz#3223
* sftp(1): when doing an sftp recursive upload or download of a
read-only directory, ensure that the directory is created with
write and execute permissions in the interim so that the transfer
can actually complete, then set the directory permission as the
final step. bz#3222
* ssh-keygen(1): document the -Z, check the validity of its argument
earlier and provide a better error message if it's not correct.
bz#2879
* ssh(1): ignore comments at the end of config lines in ssh_config,
similar to what we already do for sshd_config. bz#2320
* sshd_config(5): mention that DisableForwarding is valid in a
sshd_config Match block. bz3239
* sftp(1): fix incorrect sorting of "ls -ltr" under some
circumstances. bz3248.
* ssh(1), sshd(8): fix potential integer truncation of (unlikely)
timeout values. bz#3250
* ssh(1): make hostbased authentication send the signature algorithm
in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type.
This make HostbasedAcceptedAlgorithms do what it is supposed to -
filter on signature algorithm and not key type.
- Rebased patches:
* openssh-7.7p1-IPv6_X_forwarding.patch
* openssh-7.7p1-X11_trusted_forwarding.patch
* openssh-7.7p1-X_forward_with_disabled_ipv6.patch
* openssh-7.7p1-cavstest-ctr.patch
* openssh-7.7p1-cavstest-kdf.patch
* openssh-7.7p1-disable_openssl_abi_check.patch
* openssh-7.7p1-eal3.patch
* openssh-7.7p1-enable_PAM_by_default.patch
* openssh-7.7p1-fips.patch
* openssh-7.7p1-fips_checks.patch
* openssh-7.7p1-host_ident.patch
* openssh-7.7p1-hostname_changes_when_forwarding_X.patch
* openssh-7.7p1-ldap.patch
* openssh-7.7p1-no_fork-no_pid_file.patch
* openssh-7.7p1-pam_check_locks.patch
* openssh-7.7p1-pts_names_formatting.patch
* openssh-7.7p1-remove_xauth_cookies_on_exit.patch
* openssh-7.7p1-seccomp_ipc_flock.patch
* openssh-7.7p1-seccomp_stat.patch
* openssh-7.7p1-send_locale.patch
* openssh-7.7p1-sftp_force_permissions.patch
* openssh-7.7p1-sftp_print_diagnostic_messages.patch
* openssh-7.7p1-systemd-notify.patch
* openssh-7.9p1-keygen-preserve-perms.patch
* openssh-7.9p1-revert-new-qos-defaults.patch
* openssh-8.0p1-gssapi-keyex.patch
* openssh-8.1p1-audit.patch
* openssh-8.1p1-seccomp-clock_gettime64.patch
* openssh-8.1p1-seccomp-clock_nanosleep.patch
* openssh-8.1p1-seccomp-clock_nanosleep_time64.patch
* openssh-8.1p1-use-openssl-kdf.patch
* openssh-8.4p1-vendordir.patch
* openssh-fips-ensure-approved-moduli.patch
* openssh-link-with-sk.patch
* openssh-reenable-dh-group14-sha1-default.patch
* openssh-whitelist-syscalls.patch
- Removed openssh-fix-ssh-copy-id.patch (fixed upstream).
OBS-URL: https://build.opensuse.org/request/show/922068
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
- update to 8.4p1:
Security
========
* ssh-agent(1): restrict ssh-agent from signing web challenges for
FIDO/U2F keys.
* ssh-keygen(1): Enable FIDO 2.1 credProtect extension when generating
a FIDO resident key.
* ssh(1), ssh-keygen(1): support for FIDO keys that require a PIN for
each use. These keys may be generated using ssh-keygen using a new
"verify-required" option. When a PIN-required key is used, the user
will be prompted for a PIN to complete the signature operation.
New Features
------------
* sshd(8): authorized_keys now supports a new "verify-required"
option to require FIDO signatures assert that the token verified
that the user was present before making the signature. The FIDO
protocol supports multiple methods for user-verification, but
currently OpenSSH only supports PIN verification.
* sshd(8), ssh-keygen(1): add support for verifying FIDO webauthn
signatures. Webauthn is a standard for using FIDO keys in web
browsers. These signatures are a slightly different format to plain
FIDO signatures and thus require explicit support.
* ssh(1): allow some keywords to expand shell-style ${ENV}
environment variables. The supported keywords are CertificateFile,
ControlPath, IdentityAgent and IdentityFile, plus LocalForward and
RemoteForward when used for Unix domain socket paths. bz#3140
* ssh(1), ssh-agent(1): allow some additional control over the use of
ssh-askpass via a new $SSH_ASKPASS_REQUIRE environment variable,
including forcibly enabling and disabling its use. bz#69
* ssh(1): allow ssh_config(5)'s AddKeysToAgent keyword accept a time
OBS-URL: https://build.opensuse.org/request/show/863944
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=222
- Fix build breakage caused by missing security key objects:
+ Modify openssh-7.7p1-cavstest-ctr.patch.
+ Modify openssh-7.7p1-cavstest-kdf.patch.
+ Add openssh-link-with-sk.patch.
- Add openssh-fips-ensure-approved-moduli.patch (bsc#1177939).
This ensures only approved DH parameters are used in FIPS mode.
- Add openssh-8.1p1-ed25519-use-openssl-rng.patch (bsc#1173799).
This uses OpenSSL's RAND_bytes() directly instead of the internal
ChaCha20-based implementation to obtain random bytes for Ed25519
curve computations. This is required for FIPS compliance.
OBS-URL: https://build.opensuse.org/request/show/849311
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=219
- Version update to 8.3p1:
= Potentially-incompatible changes
* sftp(1): reject an argument of "-1" in the same way as ssh(1) and
scp(1) do instead of accepting and silently ignoring it.
= New features
* sshd(8): make IgnoreRhosts a tri-state option: "yes" to ignore
rhosts/shosts, "no" allow rhosts/shosts or (new) "shosts-only"
to allow .shosts files but not .rhosts.
* sshd(8): allow the IgnoreRhosts directive to appear anywhere in a
sshd_config, not just before any Match blocks.
* ssh(1): add %TOKEN percent expansion for the LocalFoward and
RemoteForward keywords when used for Unix domain socket forwarding.
* all: allow loading public keys from the unencrypted envelope of a
private key file if no corresponding public key file is present.
* ssh(1), sshd(8): prefer to use chacha20 from libcrypto where
possible instead of the (slower) portable C implementation included
in OpenSSH.
* ssh-keygen(1): add ability to dump the contents of a binary key
revocation list via "ssh-keygen -lQf /path".
- Additional changes from 8.2p1 release:
= Potentially-incompatible changes
* ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures
(i.e. the client and server CASignatureAlgorithms option) and will
use the rsa-sha2-512 signature algorithm by default when the
ssh-keygen(1) CA signs new certificates.
* ssh(1), sshd(8): this release removes diffie-hellman-group14-sha1
from the default key exchange proposal for both the client and
server.
* ssh-keygen(1): the command-line options related to the generation
OBS-URL: https://build.opensuse.org/request/show/811897
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=211
Add openssh-7.9p1-keygen-preserve-perms.patch (bsc#1150574).
This attempts to preserve the permissions of any existing
known_hosts file when modified by ssh-keygen (for instance,
with -R).
Run 'ssh-keygen -A' on startup only if SSHD_AUTO_KEYGEN="yes"
in /etc/sysconfig/ssh. This is set to "yes" by default, but
can be changed by the system administrator (bsc#1139089).
Add openssh-7.9p1-keygen-preserve-perms.patch (bsc#1150574).
This attempts to preserve the permissions of any existing
known_hosts file when modified by ssh-keygen (for instance,
with -R).
OBS-URL: https://build.opensuse.org/request/show/738490
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=198
Version update to 8.1p1:
* ssh-keygen(1): when acting as a CA and signing certificates with
an RSA key, default to using the rsa-sha2-512 signature algorithm.
Certificates signed by RSA keys will therefore be incompatible
with OpenSSH versions prior to 7.2 unless the default is
overridden (using "ssh-keygen -t ssh-rsa -s ...").
* ssh(1): Allow %n to be expanded in ProxyCommand strings
* ssh(1), sshd(8): Allow prepending a list of algorithms to the
default set by starting the list with the '^' character, E.g.
"HostKeyAlgorithms ^ssh-ed25519"
* ssh-keygen(1): add an experimental lightweight signature and
verification ability. Signatures may be made using regular ssh keys
held on disk or stored in a ssh-agent and verified against an
authorized_keys-like list of allowed keys. Signatures embed a
namespace that prevents confusion and attacks between different
usage domains (e.g. files vs email).
* ssh-keygen(1): print key comment when extracting public key from a
private key.
* ssh-keygen(1): accept the verbose flag when searching for host keys
in known hosts (i.e. "ssh-keygen -vF host") to print the matching
host's random-art signature too.
* All: support PKCS8 as an optional format for storage of private
keys to disk. The OpenSSH native key format remains the default,
but PKCS8 is a superior format to PEM if interoperability with
non-OpenSSH software is required, as it may use a less insecure
key derivation function than PEM's.
- Additional changes from 8.0p1 release:
* scp(1): Add "-T" flag to disable client-side filtering of
server file list.
* sshd(8): Remove support for obsolete "host/port" syntax.
OBS-URL: https://build.opensuse.org/request/show/737034
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=197
