- Version upgrade to 8.8p1
* No changes for askpass, see main package changelog for
details
- Version update to 8.8p1:
= Security
* sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise
supplemental groups when executing an AuthorizedKeysCommand or
AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or
AuthorizedPrincipalsCommandUser directive has been set to run the
command as a different user. Instead these commands would inherit
the groups that sshd(8) was started with.
Depending on system configuration, inherited groups may allow
AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to
gain unintended privilege.
Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are
enabled by default in sshd_config(5).
= Potentially-incompatible changes
* This release disables RSA signatures using the SHA-1 hash algorithm
by default. This change has been made as the SHA-1 hash algorithm is
cryptographically broken, and it is possible to create chosen-prefix
hash collisions for <USD$50K.
For most users, this change should be invisible and there is
no need to replace ssh-rsa keys. OpenSSH has supported RFC8332
RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys
will automatically use the stronger algorithm where possible.
Incompatibility is more likely when connecting to older SSH
implementations that have not been upgraded or have not closely tracked
improvements in the SSH protocol. For these cases, it may be necessary
to selectively re-enable RSA/SHA1 to allow connection and/or user
authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms
options.
= New features
* ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs
directive to accept a "none" argument to specify the default
behaviour.
= Bugfixes
* scp(1): when using the SFTP protocol, continue transferring files
after a transfer error occurs, better matching original scp/rcp
behaviour.
* ssh(1): fixed a number of memory leaks in multiplexing,
* ssh-keygen(1): avoid crash when using the -Y find-principals
command.
* A number of documentation and manual improvements, including
bz#3340, PR139, PR215, PR241, PR257
- Additional changes from 8.7p1 release:
= Potentially-incompatible changes
* scp(1): this release changes the behaviour of remote to remote
copies (e.g. "scp host-a:/path host-b:") to transfer through the
local host by default. This was previously available via the -3
flag. This mode avoids the need to expose credentials on the
origin hop, avoids triplicate interpretation of filenames by the
shell (by the local system, the copy origin and the destination)
and, in conjunction with the SFTP support for scp(1) mentioned
below, allows use of all authentication methods to the remote
hosts (previously, only non-interactive methods could be used).
A -R flag has been added to select the old behaviour.
* ssh(1)/sshd(8): both the client and server are now using a
stricter configuration file parser. The new parser uses more
shell-like rules for quotes, space and escape characters. It is
also more strict in rejecting configurations that include options
lacking arguments. Previously some options (e.g. DenyUsers) could
appear on a line with no subsequent arguments. This release will
reject such configurations. The new parser will also reject
configurations with unterminated quotes and multiple '='
characters after the option name.
* ssh(1): when using SSHFP DNS records for host key verification,
ssh(1) will verify all matching records instead of just those
with the specific signature type requested. This may cause host
key verification problems if stale SSHFP records of a different
or legacy signature type exist alongside other records for a
particular host. bz#3322
* ssh-keygen(1): when generating a FIDO key and specifying an
explicit attestation challenge (using -Ochallenge), the challenge
will now be hashed by the builtin security key middleware. This
removes the (undocumented) requirement that challenges be exactly
32 bytes in length and matches the expectations of libfido2.
* sshd(8): environment="..." directives in authorized_keys files are
now first-match-wins and limited to 1024 discrete environment
variable names.
= New features
* scp(1): experimental support for transfers using the SFTP protocol
as a replacement for the venerable SCP/RCP protocol that it has
traditionally used. SFTP offers more predictable filename handling
and does not require expansion of glob(3) patterns via the shell
on the remote side.
* sftp-server(8): add a protocol extension to support expansion of
~/ and ~user/ prefixed paths. This was added to support these
paths when used by scp(1) while in SFTP mode.
* ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to
the ssh(1) -f flag. GHPR231
* ssh(1): add a StdinNull directive to ssh_config(5) that allows the
config file to do the same thing as -n does on the ssh(1) command-
line. GHPR231
* ssh(1): add a SessionType directive to ssh_config, allowing the
configuration file to offer equivalent control to the -N (no
session) and -s (subsystem) command-line flags. GHPR231
* ssh-keygen(1): allowed signers files used by ssh-keygen(1)
signatures now support listing key validity intervals alongside
they key, and ssh-keygen(1) can optionally check during signature
verification whether a specified time falls inside this interval.
This feature is intended for use by git to support signing and
verifying objects using ssh keys.
* ssh-keygen(8): support printing of the full public key in a sshsig
signature via a -Oprint-pubkey flag.
= Bugfixes
* ssh(1)/sshd(8): start time-based re-keying exactly on schedule in
the client and server mainloops. Previously the re-key timeout
could expire but re-keying would not start until a packet was sent
or received, causing a spin in select() if the connection was
quiescent.
* ssh-keygen(1): avoid Y2038 problem in printing certificate
validity lifetimes. Dates past 2^31-1 seconds since epoch were
displayed incorrectly on some platforms. bz#3329
* scp(1): allow spaces to appear in usernames for local to remote
and scp -3 remote to remote copies. bz#1164
* ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication
in favour of KbdInteractiveAuthentication. The former is what was in
SSHv1, the latter is what is in SSHv2 (RFC4256) and they were
treated as somewhat but not entirely equivalent. We retain the old
name as a deprecated alias so configuration files continue to work
as well as a reference in the man page for people looking for it.
bz#3303
* ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name
when extracting a key from a PKCS#11 certificate. bz#3327
* ssh(1): restore blocking status on stdio fds before close. ssh(1)
needs file descriptors in non-blocking mode to operate but it was
not restoring the original state on exit. This could cause
problems with fds shared with other programs via the shell,
bz#3280 and GHPR246
* ssh(1)/sshd(8): switch both client and server mainloops from
select(3) to pselect(3). Avoids race conditions where a signal
may arrive immediately before select(3) and not be processed until
an event fires. bz#2158
* ssh(1): sessions started with ControlPersist were incorrectly
executing a shell when the -N (no shell) option was specified.
bz#3290
* ssh(1): check if IPQoS or TunnelDevice are already set before
overriding. Prevents values in config files from overriding values
supplied on the command line. bz#3319
* ssh(1): fix debug message when finding a private key to match a
certificate being attempted for user authentication. Previously it
would print the certificate's path, whereas it was supposed to be
showing the private key's path. GHPR247
* sshd(8): match host certificates against host public keys, not
private keys. Allows use of certificates with private keys held in
a ssh-agent. bz#3524
* ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which
allows RSA/SHA2 signatures for public key authentication but fails
to advertise this correctly via SSH2_MSG_EXT_INFO. This causes
clients of these server to incorrectly match
PubkeyAcceptedAlgorithmse and potentially refuse to offer valid
keys. bz#3213
* sftp(1)/scp(1): degrade gracefully if a sftp-server offers the
limits@openssh.com extension but fails when the client tries to
invoke it. bz#3318
* ssh(1): allow ssh_config SetEnv to override $TERM, which is
otherwise handled specially by the protocol. Useful in ~/.ssh/config
to set TERM to something generic (e.g. "xterm" instead of
"xterm-256color") for destinations that lack terminfo entries.
* sftp-server(8): the limits@openssh.com extension was incorrectly
marked as an operation that writes to the filesystem, which made it
unavailable in sftp-server read-only mode. bz#3318
* ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when
the update removed more host keys than remain present.
* Many manual page fixes.
- Additional changes from 8.6p1 release:
= Security
* sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this
option was enabled with a set of patterns that activated logging
in code that runs in the low-privilege sandboxed sshd process, the
log messages were constructed in such a way that printf(3) format
strings could effectively be specified the low-privilege code.
= New features
* sftp-server(8): add a new limits@openssh.com protocol extension
that allows a client to discover various server limits, including
maximum packet size and maximum read/write length.
* sftp(1): use the new limits@openssh.com extension (when available)
to select better transfer lengths in the client.
* sshd(8): Add ModuliFile keyword to sshd_config to specify the
location of the "moduli" file containing the groups for DH-GEX.
* unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to
enable printing of the elapsed time in seconds of each test.
= Bugfixes
* ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in
manual pages with the current default. GHPR174
* ssh(1): ensure that pkcs11_del_provider() is called before exit.
GHPR234
* ssh(1), sshd(8): fix problems in string->argv conversion. Multiple
backslashes were not being dequoted correctly and quoted space in
the middle of a string was being incorrectly split. GHPR223
* ssh(1): return non-zero exit status when killed by signal; bz#3281
* sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum
packet size. Also handle zero-length reads that are not explicitly
banned by the spec.
- Additional changes from 8.5p1 release:
= Security
* ssh-agent(1): fixed a double-free memory corruption that was
introduced in OpenSSH 8.2 . We treat all such memory faults as
potentially exploitable. This bug could be reached by an attacker
with access to the agent socket.
= Potentially-incompatible changes
* ssh(1), sshd(8): this release changes the first-preference signature
algorithm from ECDSA to ED25519.
* ssh(1), sshd(8): set the TOS/DSCP specified in the configuration
for interactive use prior to TCP connect. The connection phase of
the SSH session is time-sensitive and often explicitly interactive.
The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
* ssh(1), sshd(8): remove the pre-standardization cipher
rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before
it was standardized in RFC4253 (2006), has been deprecated and
disabled by default since OpenSSH 7.2 (2016) and was only briefly
documented in ssh.1 in 2001.
* ssh(1), sshd(8): update/replace the experimental post-quantum
hybrid key exchange method based on Streamlined NTRU Prime coupled
with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org
method is replaced with sntrup761x25519-sha512@openssh.com.
* ssh(1): disable CheckHostIP by default. It provides insignificant
benefits while making key rotation significantly more difficult,
especially for hosts behind IP-based load-balancers.
= New features
* ssh(1): this release enables UpdateHostkeys by default subject to
some conservative preconditions:
- The key was matched in the UserKnownHostsFile (and not in the
GlobalKnownHostsFile).
- The same key does not exist under another name.
- A certificate host key is not in use.
- known_hosts contains no matching wildcard hostname pattern.
- VerifyHostKeyDNS is not enabled.
- The default UserKnownHostsFile is in use.
* ssh(1), sshd(8): add a new LogVerbose configuration directive for
that allows forcing maximum debug logging by file/function/line
pattern-lists.
* ssh(1): when prompting the user to accept a new hostkey, display
any other host names/addresses already associated with the key.
* ssh(1): allow UserKnownHostsFile=none to indicate that no
known_hosts file should be used to identify host keys.
* ssh(1): add a ssh_config KnownHostsCommand option that allows the
client to obtain known_hosts data from a command in addition to
the usual files.
* ssh(1): add a ssh_config PermitRemoteOpen option that allows the
client to restrict the destination when RemoteForward is used
with SOCKS.
* ssh(1): for FIDO keys, if a signature operation fails with a
"incorrect PIN" reason and no PIN was initially requested from the
user, then request a PIN and retry the operation. This supports
some biometric devices that fall back to requiring PIN when reading
of the biometric failed, and devices that require PINs for all
hosted credentials.
* sshd(8): implement client address-based rate-limiting via new
sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
directives that provide more fine-grained control on a per-origin
address basis than the global MaxStartups limit.
= Bugfixes
* ssh(1): Prefix keyboard interactive prompts with "(user@host)" to
make it easier to determine which connection they are associated
with in cases like scp -3, ProxyJump, etc. bz#3224
* sshd(8): fix sshd_config SetEnv directives located inside Match
blocks. GHPR201
* ssh(1): when requesting a FIDO token touch on stderr, inform the
user once the touch has been recorded.
* ssh(1): prevent integer overflow when ridiculously large
ConnectTimeout values are specified, capping the effective value
(for most platforms) at 24 days. bz#3229
* ssh(1): consider the ECDSA key subtype when ordering host key
algorithms in the client.
* ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
PubkeyAcceptedAlgorithms. The previous name incorrectly suggested
that it control allowed key algorithms, when this option actually
specifies the signature algorithms that are accepted. The previous
name remains available as an alias. bz#3253
* ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
* sftp-server(8): add missing lsetstat@openssh.com documentation
and advertisement in the server's SSH2_FXP_VERSION hello packet.
* ssh(1), sshd(8): more strictly enforce KEX state-machine by
banning packet types once they are received. Fixes memleak caused
by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
* sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
platforms instead of being limited by LONG_MAX. bz#3206
* Minor man page fixes (capitalization, commas, etc.) bz#3223
* sftp(1): when doing an sftp recursive upload or download of a
read-only directory, ensure that the directory is created with
write and execute permissions in the interim so that the transfer
can actually complete, then set the directory permission as the
final step. bz#3222
* ssh-keygen(1): document the -Z, check the validity of its argument
earlier and provide a better error message if it's not correct.
bz#2879
* ssh(1): ignore comments at the end of config lines in ssh_config,
similar to what we already do for sshd_config. bz#2320
* sshd_config(5): mention that DisableForwarding is valid in a
sshd_config Match block. bz3239
* sftp(1): fix incorrect sorting of "ls -ltr" under some
circumstances. bz3248.
* ssh(1), sshd(8): fix potential integer truncation of (unlikely)
timeout values. bz#3250
* ssh(1): make hostbased authentication send the signature algorithm
in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type.
This make HostbasedAcceptedAlgorithms do what it is supposed to -
filter on signature algorithm and not key type.
- Rebased patches:
* openssh-7.7p1-IPv6_X_forwarding.patch
* openssh-7.7p1-X11_trusted_forwarding.patch
* openssh-7.7p1-X_forward_with_disabled_ipv6.patch
* openssh-7.7p1-cavstest-ctr.patch
* openssh-7.7p1-cavstest-kdf.patch
* openssh-7.7p1-disable_openssl_abi_check.patch
* openssh-7.7p1-eal3.patch
* openssh-7.7p1-enable_PAM_by_default.patch
* openssh-7.7p1-fips.patch
* openssh-7.7p1-fips_checks.patch
* openssh-7.7p1-host_ident.patch
* openssh-7.7p1-hostname_changes_when_forwarding_X.patch
* openssh-7.7p1-ldap.patch
* openssh-7.7p1-no_fork-no_pid_file.patch
* openssh-7.7p1-pam_check_locks.patch
* openssh-7.7p1-pts_names_formatting.patch
* openssh-7.7p1-remove_xauth_cookies_on_exit.patch
* openssh-7.7p1-seccomp_ipc_flock.patch
* openssh-7.7p1-seccomp_stat.patch
* openssh-7.7p1-send_locale.patch
* openssh-7.7p1-sftp_force_permissions.patch
* openssh-7.7p1-sftp_print_diagnostic_messages.patch
* openssh-7.7p1-systemd-notify.patch
* openssh-7.9p1-keygen-preserve-perms.patch
* openssh-7.9p1-revert-new-qos-defaults.patch
* openssh-8.0p1-gssapi-keyex.patch
* openssh-8.1p1-audit.patch
* openssh-8.1p1-seccomp-clock_gettime64.patch
* openssh-8.1p1-seccomp-clock_nanosleep.patch
* openssh-8.1p1-seccomp-clock_nanosleep_time64.patch
* openssh-8.1p1-use-openssl-kdf.patch
* openssh-8.4p1-vendordir.patch
* openssh-fips-ensure-approved-moduli.patch
* openssh-link-with-sk.patch
* openssh-reenable-dh-group14-sha1-default.patch
* openssh-whitelist-syscalls.patch
- Removed openssh-fix-ssh-copy-id.patch (fixed upstream).
OBS-URL: https://build.opensuse.org/request/show/922068
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
- Version update to 7.9p1
* No actual changes for the askpass
* See main package changelog for details
- Version update to 7.9p1
* ssh(1), sshd(8): the setting of the new CASignatureAlgorithms
option (see below) bans the use of DSA keys as certificate
authorities.
* sshd(8): the authentication success/failure log message has
changed format slightly. It now includes the certificate
fingerprint (previously it included only key ID and CA key
fingerprint).
* ssh(1), sshd(8): allow most port numbers to be specified using
service names from getservbyname(3) (typically /etc/services).
* sshd(8): support signalling sessions via the SSH protocol.
A limited subset of signals is supported and only for login or
command sessions (i.e. not subsystems) that were not subject to
a forced command via authorized_keys or sshd_config. bz#1424
* ssh(1): support "ssh -Q sig" to list supported signature options.
Also "ssh -Q help" to show the full set of supported queries.
* ssh(1), sshd(8): add a CASignatureAlgorithms option for the
client and server configs to allow control over which signature
formats are allowed for CAs to sign certificates. For example,
this allows banning CAs that sign certificates using the RSA-SHA1
signature algorithm.
* sshd(8), ssh-keygen(1): allow key revocation lists (KRLs) to
revoke keys specified by SHA256 hash.
* ssh-keygen(1): allow creation of key revocation lists directly
from base64-encoded SHA256 fingerprints. This supports revoking
keys using only the information contained in sshd(8)
OBS-URL: https://build.opensuse.org/request/show/643660
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=159
- Update to 7.8p1:
* no actual changes for the askpass
- Format with spec-cleaner
- Respect cflags
- Use gtk3 rather than gtk2 which is being phased out
- Remove the mention of the SLE12 in the README.SUSE
- Install firewall rules only when really needed (<SLE15)
- Version update to 7.8p1:
* For most details see release notes file
* ssh-keygen(1): write OpenSSH format private keys by default
instead of using OpenSSL's PEM format
- Rebase patches to apply on 7.8p1 release:
* openssh-7.7p1-fips.patch
* openssh-7.7p1-cavstest-kdf.patch
* openssh-7.7p1-fips_checks.patch
* openssh-7.7p1-gssapi_key_exchange.patch
* openssh-7.7p1-audit.patch
* openssh-7.7p1-openssl_1.1.0.patch
* openssh-7.7p1-ldap.patch
* openssh-7.7p1-IPv6_X_forwarding.patch
* openssh-7.7p1-sftp_print_diagnostic_messages.patch
* openssh-7.7p1-disable_short_DH_parameters.patch
* openssh-7.7p1-hostname_changes_when_forwarding_X.patch
* openssh-7.7p1-pam_check_locks.patch
* openssh-7.7p1-seed-prng.patch
* openssh-7.7p1-systemd-notify.patch
* openssh-7.7p1-X11_trusted_forwarding.patch
- Dropped patches:
OBS-URL: https://build.opensuse.org/request/show/642573
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=153
- Upgrade to 7.7p1 (bsc#1094068)
- Upgrade to 7.7p1 (bsc#1094068)
Most important changes (more details below):
* Drop compatibility support for pre-2001 SSH implementations
* sshd(1) does not load DSA keys by default
Distilled upstream log:
---- Potentially-incompatible changes
* ssh(1)/sshd(8): Drop compatibility support for some very old
SSH implementations, including ssh.com <=2.* and OpenSSH <=
3.*. These versions were all released in or before 2001 and
predate the final SSH RFCs. The support in question isn't
necessary for RFC-compliant SSH implementations.
---- New Features
* experimental support for PQC XMSS keys (Extended Hash-Based
Signatures), not compiled in by default.
* sshd(8): Add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on
which routing domain a connection was received on (currently
supported on OpenBSD and Linux).
* sshd_config(5): Add an optional rdomain qualifier to the
ListenAddress directive to allow listening on different
routing domains. This is supported only on OpenBSD and Linux
at present.
* sshd_config(5): Add RDomain directive to allow the
authenticated session to be placed in an explicit routing
domain. This is only supported on OpenBSD at present.
* sshd(8): Add "expiry-time" option for authorized_keys files
to allow for expiring keys.
* ssh(1): Add a BindInterface option to allow binding the
OBS-URL: https://build.opensuse.org/request/show/611002
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=145
- upgrade to 7.6p1
see main package changelog for details
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
- Update to vanilla 7.6p1
Most important changes (more details below):
* complete removal of the ancient SSHv1 protocol
* sshd(8) cannot run without privilege separation
* removal of suport for arcfourm blowfish and CAST ciphers
and RIPE-MD160 HMAC
* refuse RSA keys shorter than 1024 bits
Distilled upstream log:
- OpenSSH 7.3
---- Security
* sshd(8): Mitigate a potential denial-of-service attack
against the system's crypt(3) function via sshd(8). An
attacker could send very long passwords that would cause
excessive CPU use in crypt(3). sshd(8) now refuses to accept
password authentication requests of length greater than 1024
characters. Independently reported by Tomas Kuthan (Oracle),
Andres Rojas and Javier Nieto.
* sshd(8): Mitigate timing differences in password
authentication that could be used to discern valid from
invalid account names when long passwords were sent and
particular password hashing algorithms are in use on the
server. CVE-2016-6210, reported by EddieEzra.Harari at
verint.com
* ssh(1), sshd(8): Fix observable timing weakness in the CBC
OBS-URL: https://build.opensuse.org/request/show/551548
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=127
- upgrade to 7.6p1
see main package changelog for details
- Update to vanilla 7.6p1
Most important changes (more details below):
* complete removal of the ancient SSHv1 protocol
* sshd(8) cannot run without privilege separation
* removal of suport for arcfourm blowfish and CAST ciphers
and RIPE-MD160 HMAC
* refuse RSA keys shorter than 1024 bits
Distilled upstream log:
- OpenSSH 7.3
---- Security
* sshd(8): Mitigate a potential denial-of-service attack
against the system's crypt(3) function via sshd(8). An
attacker could send very long passwords that would cause
excessive CPU use in crypt(3). sshd(8) now refuses to accept
password authentication requests of length greater than 1024
characters. Independently reported by Tomas Kuthan (Oracle),
Andres Rojas and Javier Nieto.
* sshd(8): Mitigate timing differences in password
authentication that could be used to discern valid from
invalid account names when long passwords were sent and
particular password hashing algorithms are in use on the
server. CVE-2016-6210, reported by EddieEzra.Harari at
verint.com
* ssh(1), sshd(8): Fix observable timing weakness in the CBC
padding oracle countermeasures. Reported by Jean Paul
Degabriele, Kenny Paterson, Torben Hansen and Martin
Albrecht. Note that CBC ciphers are disabled by default and
OBS-URL: https://build.opensuse.org/request/show/539322
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=122
- upgrade to 7.2p2
- changing license to 2-clause BSD to match source
- enable trusted X11 forwarding by default
[-X11_trusted_forwarding]
- set UID for lastlog properly [-lastlog]
- enable use of PAM by default [-enable_PAM_by_default]
- copy command line arguments properly [-saveargv-fix]
- do not use pthreads in PAM code [-dont_use_pthreads_in_PAM]
- fix paths in documentation [-eal3]
- prevent race consitions triggered by SIGALRM [-blocksigalrm]
- do send and accept locale environment variables by default
[-send_locale]
- handle hostnames changes during X forwarding
[-hostname_changes_when_forwarding_X]
- try to remove xauth cookies on exit
[-remove_xauth_cookies_on_exit]
- properly format pts names for ?tmp? log files
[-pts_names_formatting]
- check locked accounts when using PAM [-pam_check_locks]
- chenge default PermitRootLogin to 'yes' to prevent unwanted
surprises on updates from older versions.
See README.SUSE for details
[-allow_root_password_login]
- Disable DH parameters under 2048 bits by default and allow
lowering the limit back to the RFC 4419 specified minimum
through an option (bsc#932483, bsc#948902)
[-disable_short_DH_parameters]
- Add getuid() and stat() syscalls to the seccomp filter
OBS-URL: https://build.opensuse.org/request/show/398802
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=103
- Cleanup with spec-cleaner
- Update of the master OpenSSH to 7.1p2
- Take refreshed and updated audit patch from redhat
* Remove our old patches:
+ openssh-6.6p1-audit1-remove_duplicit_audit.patch
+ openssh-6.6p1-audit2-better_audit_of_user_actions.patch
+ openssh-6.6p1-audit3-key_auth_usage-fips.patch
+ openssh-6.6p1-audit3-key_auth_usage.patch
+ openssh-6.6p1-audit4-kex_results-fips.patch
+ openssh-6.6p1-audit4-kex_results.patch
+ openssh-6.6p1-audit5-session_key_destruction.patch
+ openssh-6.6p1-audit6-server_key_destruction.patch
+ openssh-6.6p1-audit7-libaudit_compat.patch
+ openssh-6.6p1-audit8-libaudit_dns_timeouts.patch
* add openssh-6.7p1-audit.patch
- Reenable the openssh-6.6p1-ldap.patch
- Update the fips patch from RH build openssh-6.6p1-fips.patch
- Update and refresh openssh-6.6p1-gssapi_key_exchange.patch
- Remove fips-check patch as it is merged to fips patch
* openssh-6.6p1-fips-checks.patch
- Rebase and enable chroot patch:
* openssh-6.6p1-sftp_homechroot.patch
- Reenable rebased patch for linux seed:
* openssh-6.6p1-seed-prng.patch
- Reenable key converting patch:
* openssh-6.6p1-key-converter.patch
- Version update to 7.1p2:
* various upstream bugfixes and cleanups
OBS-URL: https://build.opensuse.org/request/show/354941
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=95
- Update of the underlying OpenSSH to 6.6p1
- update to 6.6p1
Security:
* sshd(8): when using environment passing with a sshd_config(5)
AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could
be tricked into accepting any enviornment variable that
contains the characters before the wildcard character.
Features since 6.5p1:
* ssh(1), sshd(8): removal of the J-PAKE authentication code,
which was experimental, never enabled and has been
unmaintained for some time.
* ssh(1): skip 'exec' clauses other clauses predicates failed
to match while processing Match blocks.
* ssh(1): if hostname canonicalisation is enabled and results
in the destination hostname being changed, then re-parse
ssh_config(5) files using the new destination hostname. This
gives 'Host' and 'Match' directives that use the expanded
hostname a chance to be applied.
Bugfixes:
* ssh(1): avoid spurious "getsockname failed: Bad file
descriptor" in ssh -W. bz#2200, debian#738692
* sshd(8): allow the shutdown(2) syscall in seccomp-bpf and
systrace sandbox modes, as it is reachable if the connection
is terminated during the pre-auth phase.
* ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1
bignum parsing. Minimum key length checks render this bug
unexploitable to compromise SSH 1 sessions.
* sshd_config(5): clarify behaviour of a keyword that appears
in multiple matching Match blocks. bz#2184
OBS-URL: https://build.opensuse.org/request/show/230097
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=76
- Update of the underlying OpenSSH to 6.5p1
- Update to 6.5p1
Features since 6.4p1:
* ssh(1), sshd(8): support for key exchange using ECDH in
Daniel Bernstein's Curve25519; default when both the client
and server support it.
* ssh(1), sshd(8): support for Ed25519 as a public key type fo
rboth server and client. Ed25519 is an EC signature offering
better security than ECDSA and DSA and good performance.
* Add a new private key format that uses a bcrypt KDF to better
protect keys at rest. Used unconditionally for Ed25519 keys,
on demand for other key types via the -o ssh-keygen(1)
option. Intended to become default in the near future.
Details documented in PROTOCOL.key.
* ssh(1), sshd(8): new transport cipher
"chacha20-poly1305@openssh.com" combining Daniel Bernstein's
ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode. Details documented
PROTOCOL.chacha20poly1305.
* ssh(1), sshd(8): refuse RSA keys from old proprietary clients
and servers that use the obsolete RSA+MD5 signature scheme.
It will still be possible to connect with these
clients/servers but only DSA keys will be accepted, and
OpenSSH will refuse connection entirely in a future release.
* ssh(1), sshd(8): refuse old proprietary clients and servers
that use a weaker key exchange hash calculation.
* ssh(1): increase the size of the Diffie-Hellman groups
requested for each symmetric key size. New values from NIST
Special Publication 800-57 with the upper limit specified by
OBS-URL: https://build.opensuse.org/request/show/222365
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=63
- Update of the underlying OpenSSH to 6.4p1
- Update to 6.4p1
Features since 6.2p2:
* ssh-agent(1) support in sshd(8); allows encrypted hostkeys, or
hostkeys on smartcards.
* ssh(1)/sshd(8): allow optional time-based rekeying via a
second argument to the existing RekeyLimit option. RekeyLimit
is now supported in sshd_config as well as on the client.
* sshd(8): standardise logging of information during user
authentication.
* The presented key/cert and the remote username (if available)
is now logged in the authentication success/failure message on
the same log line as the local username, remote host/port and
protocol in use. Certificates contents and the key
fingerprint of the signing CA are logged too.
* ssh(1) ability to query what cryptographic algorithms are
supported in the binary.
* ssh(1): ProxyCommand=- for cases where stdin and stdout
already point to the proxy.
* ssh(1): allow IdentityFile=none
* ssh(1)/sshd(8): -E option to append debugging logs to a
specified file instead of stderr or syslog.
* sftp(1): support resuming partial downloads with the "reget"
command and on the sftp commandline or on the "get"
commandline with the "-a" (append) option.
* ssh(1): "IgnoreUnknown" configuration option to selectively
suppress errors arising from unknown configuration directives.
* sshd(8): support for submethods to be appended to required
authentication methods listed via AuthenticationMethods.
OBS-URL: https://build.opensuse.org/request/show/220466
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=58
- Update for 6.2p2
- Update to version 6.2p2
* ssh(1)/sshd(8): Added support for AES-GCM authenticated encryption
* ssh(1)/sshd(8): Added support for encrypt-then-mac (EtM) MAC modes
* ssh(1)/sshd(8): Added support for the UMAC-128 MAC
* sshd(8): Added support for multiple required authentication
* sshd(8)/ssh-keygen(1): Added support for Key Revocation Lists
* ssh(1): When SSH protocol 2 only is selected (the default), ssh(1)
now immediately sends its SSH protocol banner to the server without
waiting to receive the server's banner, saving time when connecting.
* dozens of other changes, see http://www.openssh.org/txt/release-6.2
OBS-URL: https://build.opensuse.org/request/show/185789
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=51
Features:
* sshd(8): This release turns on pre-auth sandboxing sshd by default for
new installs, by setting UsePrivilegeSeparation=sandbox in sshd_config.
* ssh-keygen(1): Add options to specify starting line number and number of
lines to process when screening moduli candidates, allowing processing
of different parts of a candidate moduli file in parallel
* sshd(8): The Match directive now supports matching on the local (listen)
address and port upon which the incoming connection was received via
LocalAddress and LocalPort clauses.
* sshd(8): Extend sshd_config Match directive to allow setting AcceptEnv
and {Allow,Deny}{Users,Groups}
* Add support for RFC6594 SSHFP DNS records for ECDSA key types. bz#1978
* ssh-keygen(1): Allow conversion of RSA1 keys to public PEM and PKCS8
* sshd(8): Allow the sshd_config PermitOpen directive to accept "none" as
an argument to refuse all port-forwarding requests.
* sshd(8): Support "none" as an argument for AuthorizedPrincipalsFile
* ssh-keyscan(1): Look for ECDSA keys by default. bz#1971
* sshd(8): Add "VersionAddendum" to sshd_config to allow server operators
to append some arbitrary text to the server SSH protocol banner.
Bugfixes:
* ssh(1)/sshd(8): Don't spin in accept() in situations of file
descriptor exhaustion. Instead back off for a while.
* ssh(1)/sshd(8): Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs as
they were removed from the specification. bz#2023,
* sshd(8): Handle long comments in config files better. bz#2025
* ssh(1): Delay setting tty_flag so RequestTTY options are correctly
picked up. bz#1995
* sshd(8): Fix handling of /etc/nologin incorrectly being applied to root
on platforms that use login_cap.
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=42
