a773986189
90 Commits
| Author | SHA256 | Message | Date | |
|---|---|---|---|---|
Ana Guerrero
|
a773986189 |
Accepting request 1187666 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1187666 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=52 |
||
Nikolay Gueorguiev
|
bb2eb423a1 |
- Amended the .spec file
* Replaced hard-coded '/usr/share' with %{_datadir}
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=73
|
||
|
Ana Guerrero
|
c6f25595ca |
Accepting request 1187530 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1187530 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=51 |
||
|
Nikolay Gueorguiev
|
dcb5b26c8a |
- Amended the .spec file (bsc#1227537)
* 'rpm.install.excludedocs = yes' in zypp.conf excludes the /usr/share/doc/.. * Added a check, if there is is /usr/share/doc file to be editted. OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=71 |
||
|
Ana Guerrero
|
27508c4aee |
Accepting request 1168604 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1168604 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=50 |
||
|
Nikolay Gueorguiev
|
57cb7f51b9 |
Accepting request 1168603 from home:ngueorguiev:branches:security:tls
- Amended the .spec file - Changed the package names +-------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +-------------+---------------------------------+--------------------------+ | '' | openssl-ibmca | Both engine and provider | | openssl1_1 | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | +-------------+---------------------------------+--------------------------+ OBS-URL: https://build.opensuse.org/request/show/1168603 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=69 |
||
|
Nikolay Gueorguiev
|
450c38b5ae |
Accepting request 1168592 from home:ngueorguiev:branches:security:tls
- Amended the .spec file
- Changed the package names
+-------------+---------------------------------+--------------------------+
| Flavor | Package name | Note |
+-------------+---------------------------------+--------------------------+
| '' | openssl-ibmca | Both engine and provider |
| openssl1_1 | openssl1_1-ibmca | openssl1 flavor |
| engine | openssl-ibmca-engine | Only engine |
| provider | openssl-ibmca-provider | Only provider |
+-------------+---------------------------------+--------------------------+
- Applied a patch for openssl1_1 (bsc#1221627)
* openssl1-rename-libica-files.patch
- Re-implemented flavors (openssl3, engine, provider) (bsc#1221627)
+------------+---------------------------------+--------------------------+
| Flavor | Package name | Note |
+------------+---------------------------------+--------------------------+
| '' | openssl-ibmca | openssl1 flavor |
| engine | openssl3-ibmca-engine | Only engine |
| provider | openssl3-ibmca-provider | Only provider |
| openssl3 | openssl3-ibmca | Both engine and provider |
+------------+---------------------------------+--------------------------+
- Changing/editing 'dynamic_path' after the installation on the target system
* From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in
/usr/share/doc/packages/openssl3-ibmca/ibmca-engine-opensslconfig
for openssl3 flavor
- Amended the .spec file (bsc#1221627)
* Removed the flavors
* Removed 'muiltibuild' environment
* Removed the 'provider' logic
- Updated the .spec file (bsc#1218933, bsc#1221627)
* Amended the .spec file to use modulesdir variable
- Implemented _multibuild environment (openssl1, engine, provider)
- Added a flag and logic for provider in the .spec file
* When provider is set to 1, it 'configures' the provider
* When provider is set to 0, it 'configures' the engine
- Removed an obsolete patch (implemented in the version 2.4.1)
* openssl-ibmca-engine-noregister.patch
- Upgrade to version 2.4.1 (jsc#PED-5422)
* Provider: Change the default log directory to /tmp
* Bug fixes
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1168592
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=68
|
||
|
Nikolay Gueorguiev
|
01268ca482 |
Accepting request 1168552 from home:ngueorguiev:branches:security:tls
- Amended the .spec file - Changed the package names +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | | openssl3 | openssl-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Applied a patch for openssl1_1 (bsc#1221627) * openssl1-rename-libica-files.patch OBS-URL: https://build.opensuse.org/request/show/1168552 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=67 |
||
|
Nikolay Gueorguiev
|
a4456cfb82 |
Accepting request 1168543 from home:ngueorguiev:branches:security:tls
- Amended the .spec file - Changed the package names +------------+---------------------------------+--------------------------+ | Flavor | Package name | Note | +------------+---------------------------------+--------------------------+ | '' | openssl1_1-ibmca | openssl1 flavor | | engine | openssl-ibmca-engine | Only engine | | provider | openssl-ibmca-provider | Only provider | | openssl3 | openssl-ibmca | Both engine and provider | +------------+---------------------------------+--------------------------+ - Applied a patch for openssl1_1 (bsc#1221627) * openssl1-rename-libica-files.patch OBS-URL: https://build.opensuse.org/request/show/1168543 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=66 |
||
|
Nikolay Gueorguiev
|
1c1bc15f2d |
Accepting request 1166593 from home:ngueorguiev:branches:security:tls
Re-implemented flavors (openssl3, engine, provider) OBS-URL: https://build.opensuse.org/request/show/1166593 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=65 |
||
|
Nikolay Gueorguiev
|
f97e95c8e8 |
Accepting request 1166481 from home:ngueorguiev:branches:security:tls
- Re-implemented flavors (openssl3, engine, provider) (bsc#1221627)
+------------+---------------------------------+--------------------------+
| Flavor | Package name | Note |
+------------+---------------------------------+--------------------------+
| '' | openssl-ibmca | openssl1 flavor |
| engine | openssl3-ibmca-engine | Only engine |
| provider | openssl3-ibmca-provider | Only provider |
| openssl3 | openssl3-ibmca | Both engine and provider |
+------------+---------------------------------+--------------------------+
- Changing/editing 'dynamic_path' after the installation on the target system
* From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in
/usr/share/doc/packages/openssl3-ibmca/ibmca-engine-opensslconfig
for openssl3 flavor
- Amended the .spec file (bsc#1221627)
* Removed the flavors
* Removed 'muiltibuild' environment
* Removed the 'provider' logic
- Updated the .spec file (bsc#1218933, bsc#1221627)
* Amended the .spec file to use modulesdir variable
- Implemented _multibuild environment (openssl1, engine, provider)
- Added a flag and logic for provider in the .spec file
* When provider is set to 1, it 'configures' the provider
* When provider is set to 0, it 'configures' the engine
- Removed an obsolete patch (implemented in the version 2.4.1)
* openssl-ibmca-engine-noregister.patch
- Upgrade to version 2.4.1 (jsc#PED-5422)
* Provider: Change the default log directory to /tmp
* Bug fixes
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1166481
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=64
|
||
|
Nikolay Gueorguiev
|
5fb994c222 |
Accepting request 1165422 from home:ngueorguiev:branches:security:tls
- Changing/editing 'dynamic_path' after the installation on the target system
* From /usr/lib64/ossl-modules to /usr/lib64/engines-3 in
/usr/share/doc/packages/openssl-ibmca/ibmca-engine-opensslconfig
- Amended the .spec file (bsc#1221627)
* Removed the flavors
* Removed 'muiltibuild' environment
* Removed the 'provider' logic
- Updated the .spec file (bsc#1218933, bsc#1221627)
* Amended the .spec file to use modulesdir variable
- Implemented _multibuild environment (openssl1, engine, provider)
- Added a flag and logic for provider in the .spec file
* When provider is set to 1, it 'configures' the provider
* When provider is set to 0, it 'configures' the engine
- Removed an obsolete patch (implemented in the version 2.4.1)
* openssl-ibmca-engine-noregister.patch
- Upgrade to version 2.4.1 (jsc#PED-5422)
* Provider: Change the default log directory to /tmp
* Bug fixes
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1165422
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=63
|
||
|
Nikolay Gueorguiev
|
81a2f2876e |
Accepting request 1164961 from home:ngueorguiev:branches:security:tls
- Amended the .spec file (bsc#1221627)
* Removed the flavors
* Removed 'muiltibuild' environment
* Removed the 'provider' logic
- Updated the .spec file (bsc#1218933, bsc#1221627)
* Amended the .spec file to use modulesdir variable
- Implemented _multibuild environment (openssl1, engine, provider)
- Added a flag and logic for provider in the .spec file
* When provider is set to 1, it 'configures' the provider
* When provider is set to 0, it 'configures' the engine
- Removed an obsolete patch (implemented in the version 2.4.1)
* openssl-ibmca-engine-noregister.patch
- Upgrade to version 2.4.1 (jsc#PED-5422)
* Provider: Change the default log directory to /tmp
* Bug fixes
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1164961
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=62
|
||
|
Nikolay Gueorguiev
|
57d149fac0 |
Accepting request 1164500 from home:ngueorguiev:branches:security:tls
- Amended the .spec file (bsc#1221627)
* Removed the flavors
* Removed 'muiltibuild' environment
* Removed the 'provider' logic
- Updated the .spec file (bsc#1218933, bsc#1221627)
* Amended the .spec file to use modulesdir variable
- Implemented _multibuild environment (openssl1, engine, provider)
- Added a flag and logic for provider in the .spec file
* When provider is set to 1, it 'configures' the provider
* When provider is set to 0, it 'configures' the engine
- Removed an obsolete patch (implemented in the version 2.4.1)
* openssl-ibmca-engine-noregister.patch
- Upgrade to version 2.4.1 (jsc#PED-5422)
* Provider: Change the default log directory to /tmp
* Bug fixes
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1164500
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=61
|
||
|
Nikolay Gueorguiev
|
6345fc1b78 |
Accepting request 1164459 from home:ngueorguiev:branches:security:tls
- Amended the .spec file (bsc#1221627) * Removed the flavors OBS-URL: https://build.opensuse.org/request/show/1164459 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=60 |
||
|
Ana Guerrero
|
41fec090e3 |
Accepting request 1159245 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1159245 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=49 |
||
|
Nikolay Gueorguiev
|
b35925491c |
Accepting request 1159244 from home:ngueorguiev:branches:security:tls
Updated the .spec file. OBS-URL: https://build.opensuse.org/request/show/1159244 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=58 |
||
|
Nikolay Gueorguiev
|
821561cda7 |
Accepting request 1159117 from home:ngueorguiev:branches:security:tls
- Updated the .spec file (bsc#1218933, bsc#1221627) * Amended the .spec file to use modulesdir variable - Implemented _multibuild environment (openssl1, engine, provider) - Added a flag and logic for provider in the .spec file * When provider is set to 1, it 'configures' the provider * When provider is set to 0, it 'configures' the engine OBS-URL: https://build.opensuse.org/request/show/1159117 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=57 |
||
|
Ana Guerrero
|
a2b4c89bce |
Accepting request 1117655 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1117655 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=48 |
||
|
Nikolay Gueorguiev
|
3f2f0b2b75 |
Accepting request 1117654 from home:ngueorguiev:branches:security:tls
- Removed an obsolete patch (implemented in the version 2.4.1) * openssl-ibmca-engine-noregister.patch - Upgrade to version 2.4.1 (jsc#PED-5422) * Provider: Change the default log directory to /tmp * Bug fixes OBS-URL: https://build.opensuse.org/request/show/1117654 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=55 |
||
|
Nikolay Gueorguiev
|
8672afbd14 |
Accepting request 1088271 from home:ngueorguiev:branches:security:tls
- Updated the .spec file, amended to use libica4 instead of libica
* Requires: libica4 >= 4
- Updated the .spec file
* uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1088271
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=54
|
||
|
Nikolay Gueorguiev
|
0183033f85 |
Accepting request 1087780 from home:ngueorguiev:branches:security:tls
- Updated the .spec file, amended to use libica4 instead of libica * BuildRequires: libica4 >= 4 * Requires: libica4 >= 4 OBS-URL: https://build.opensuse.org/request/show/1087780 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=53 |
||
Dominique Leuenberger
|
ed36411023 |
Accepting request 1083948 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1083948 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=47 |
||
|
Dominique Leuenberger
|
c848043467 |
Accepting request 1083237 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1083237 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=46 |
||
|
Nikolay Gueorguiev
|
c919c280fe |
Accepting request 1083947 from home:ngueorguiev:branches:security:tls
- Updated the .spec file * uses a flag openssl3 (1 or 0) to include or not the openssl3 libraries OBS-URL: https://build.opensuse.org/request/show/1083947 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=49 |
||
|
Nikolay Gueorguiev
|
1b6da356a1 |
Accepting request 1083236 from home:ngueorguiev:branches:security:tls
- Updated the .spec file as follow:
* BuildRequires: libica-devel >= 4.0.0
* BuildRequires: libica-tools >= 4.0.0
- Added dependency on libica4 (bsc#1209038)
* BuildRequires and Requires statements in .spec file for libica4
- Applies a patch (bsc#1210359)
* openssl-ibmca-engine-noregister.patch
- Updated the '#dynamic_path' line, as it was before, with the comment '#'.
- Upgraded openssl-ibmca to version 2.4.0 (bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1083236
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=48
|
||
|
Dominique Leuenberger
|
369e6366a1 |
Accepting request 1082896 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1082896 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=45 |
||
|
Nikolay Gueorguiev
|
b32f0b33a8 |
Accepting request 1082895 from home:ngueorguiev:branches:security:tls
- Updated the .spec file as follow: * BuildRequires: libica-devel >= 4.0.0 * BuildRequires: libica-tools >= 4.0.0 OBS-URL: https://build.opensuse.org/request/show/1082895 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=46 |
||
|
Dominique Leuenberger
|
88134080e3 |
Accepting request 1082459 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1082459 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=44 |
||
|
Nikolay Gueorguiev
|
98cd51e90c |
Accepting request 1082458 from home:ngueorguiev:branches:security:tls
- Added dependency on libica4 (bsc#1209038) * BuildRequires and Requires statements in .spec file for libica4 OBS-URL: https://build.opensuse.org/request/show/1082458 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=44 |
||
|
Dominique Leuenberger
|
63379767f2 |
Accepting request 1080297 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1080297 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=43 |
||
|
Nikolay Gueorguiev
|
8d6a266310 |
Accepting request 1080296 from home:ngueorguiev:branches:security:tls
- Applies a patch (bsc#1210359) * openssl-ibmca-engine-noregister.patch - Updated the '#dynamic_path' line, as it was before, with the comment '#'. OBS-URL: https://build.opensuse.org/request/show/1080296 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=42 |
||
|
Dominique Leuenberger
|
624becd10b |
Accepting request 1077683 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1077683 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=42 |
||
|
Nikolay Gueorguiev
|
e965f0bc6c |
Accepting request 1077682 from home:ngueorguiev:branches:security:tls
- Upgraded openssl-ibmca to version 2.4.0(bsc#1210059)
* openssl-ibmca 2.4.0
- Provider: Adjustments for OpenSSL versions 3.1 and 3.2
- Provider: Support RSA blinding
- Provider: Constant-time fixes for RSA PKCS#1 v1.5 and OAEP padding
- Provider: Support "implicit rejection" option for RSA PKCS#1 v1.5 padding
- Provider: Adjustments in OpenSSL config generator and example configs
- Engine: EC: Cache ICA key in EC_KEY object (performance improvement)
- Engine: Enable RSA blinding
- Updated .spec file removed '#' from the line containing
'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038)
- Added in %files
* /usr/lib64/engines-3/ibmca-provider.la
* /usr/lib64/engines-3/ibmca-provider.so
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/1077682
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=40
|
||
|
Dominique Leuenberger
|
2fbe69b3ae |
Accepting request 1077151 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1077151 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=41 |
||
|
Nikolay Gueorguiev
|
51e8b73820 |
Accepting request 1077150 from home:ngueorguiev:branches:security:tls
- Upgraded openssl-ibmca to version 2.4.0(bsc#1210058 and bsc#1210059) OBS-URL: https://build.opensuse.org/request/show/1077150 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=38 |
||
|
Dominique Leuenberger
|
4972679154 |
Accepting request 1071488 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1071488 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=40 |
||
|
Nikolay Gueorguiev
|
b511c86cb2 |
Accepting request 1071487 from home:ngueorguiev:branches:security:tls
- Updated .spec file removed '#' from the line containing 'sed -e 's/^dynamic_path/#dynamic_path/' (bsc#1209038) - Added in %files * /usr/lib64/engines-3/ibmca-provider.la * /usr/lib64/engines-3/ibmca-provider.so OBS-URL: https://build.opensuse.org/request/show/1071487 OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=36 |
||
Richard Brown
|
96a9aacece |
Accepting request 1008264 from security:tls
OBS-URL: https://build.opensuse.org/request/show/1008264 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=39 |
||
Mark Post
|
a906fc4547 |
Accepting request 1008263 from home:markkp:branches:security:tls
- Upgraded to version 2.3.1 (jsc#PED-597)
* openssl-ibmca 2.3.1
- Adjustments for libica 4.1.0
* openssl-ibmca 2.3.0
- First version including the provider
- Fix for engine build without OpenSSL 3.0 sources
* openssl-ibmca 2.2.3
- Fix PKEY segfault with OpenSSL 3.0
* openssl-ibmca 2.2.2
- Fix tests with OpenSSL 3.0
- Build against libica 4.0
- Removed a Requires for libica from the specfile.
- Removed the obsolete baselibs.conf file
OBS-URL: https://build.opensuse.org/request/show/1008263
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=34
|
||
|
Dominique Leuenberger
|
48092c76e8 |
Accepting request 962258 from security:tls
OBS-URL: https://build.opensuse.org/request/show/962258 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=38 |
||
|
Mark Post
|
39c822489c |
Accepting request 962257 from home:markkp:branches:security:tls
- Completely revamped the postinstall scriptlet so that it doesn't
need to know or care about how many lines are in either
/etc/ssl/openssl.cnf, or the sample file at
/usr/share/doc/packages/openssl-ibmca/openssl.cnf.sample
We're now using the ".include" directive for the openssl.cnf
file, and only modifying that file the minimum necessary to
implement the change. (bsc#1004463)
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginesdir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
- Upgrade to version 2.1.1 (jsc#SLE-13709)
* Bug fixes
- Upgrade to version 2.1.0 (jsc#SLE-7852, jsc#SLE-7882)
Add MSA9 CPACF support for X25519, X448, Ed25519 and Ed448
- Upgraded to version 2.0.3 (jsc#SLE-6123, jsc#SLE-6424)
* openssl-ibmca 2.0.3
Add MSA9 CPACF support for ECDSA sign/verify
- Dropped obsolete openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
- Changed the ExclusiveArch directive to include s390x only.
- The code in e_ibmca.c does a dlopen for libica.so.3, instead of
linking against the shared library. As a result, if the package
containing libica.so.3 isn't installed, problems occur. Added
a "Requires: libica3" to the spec file to fix this. (bsc#1142286)
- Made a couple of changes to the spec file based on the output
from spec-cleaner.
- Added openssl-ibmca-sles15sp1-Move-ERR_load-unload-to-bind_helper-resp-destroy-fun.patch
An Apache HTTP Server was set up with mod_ssl and the openssl
ibmca engine using libica and a CEX6A card. Whenever a worker
process is cleaned up a segmentation fault occurs.
(bsc#1138517)
- Upgraded to version 2.0.2 (Fate#325688)
* openssl-ibmca 2.0.2
Fix doing rsa-me, altough rsa-crt would be possible.
- Upgraded to version 2.0.1 (Fate#325688)
* openssl-ibmca 2.0.1
Dont fail when a libica symbol cannot be resolved.
- Made multiple changes to the spec file based on spec-cleaner output.
- Upgraded to version 2.0.0 (Fate#325688)
* openssl-ibmca 2.0.0
Add ECC support.
Add check and distcheck make-targets.
Project cleanup, code was broken into multiple files and coding style cleanup.
Improvements to compat macros for openssl.
Don't disable libica sw fallbacks.
Fix dlclose logic.
* openssl-ibmca 1.4.1
Fix structure size for aes-256-ecb/cbc/cfb/ofb
Update man page
Switch to ibmca.so filename to allow standalone use
Switch off Libica fallback mode if available
Make sure ibmca_init only runs once
Provide simple macro for DEBUG_PRINTF possibility
Cleanup and slight rework of function set_supported_meths
- Did some cleanup to the spec file, based on spec-cleanup.
- Removed the following obsolete patches:
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Added the following patches for bsc#1097463
* openssl-ibmca-sles15-Switch-to-ibmca.so-filename-to-allow-a-standalone-us.patch
* openssl-ibmca-sles15-Fix-lib-name-in-test-code.patch
* openssl-ibmca-sles15-Update-lib-name-in-documentation.patch
- Upgraded to version 1.4.0
* Re-license to Apache License v2.0
* Fix aes_gcm initialization.
* Update man page.
* Add macros for OpenSSL 0.9.8 compat.
* Remove AC_FUNC_MALLOC from configure.ac
* Add compat macro for OpenSSL 1.0.1e-fips.
* Setting 'foreign' strictness for automake.
* Add AES-GCM support.
* Rework EVP_aes macros.
* Remove dependency of old local OpenSSL headers.
* Fix engine initialization to set function pointers only once.
* Remove blank COPYING and NEWS files.
* Remove INSTALL and move its content to README.md
* Update README.md file to make use of markdown.
* Rename README file to README.md to use markdown
* Add CONTRIBUTING guidelines.
* Adding coding style documentation.
* Enable EVP_MD_FLAG_FIPS flag for SHA-*.
* Initialize rsa_keygen in RSA_METHOD for openssl < 1.1.0
* Fix SHA512 EVP digest struct to use
EVP_MD_FLAG_PKEY_METHOD_SIGNATURE when using OpenSSL 1.0
* Fix wrong parenthesis
* convert libica loading to dlopen() and friends
* Add support to DSO on new API of OpenSSL-1.1.0
- Removed obsolete openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch
- Added BuildRequires for autoconf, automake, and libtool.
- Updated BuildRequires for libica-devel to be >= 3.1.1
- Now that the openSSL engines directory is versioned:
* Modified the spec file to query the libcrypto package
for which directory to install the engine into.
* Removed openssl-ibmca-fix-enginepath.patch. Replaced it
with a sed command so that it will provide the correct
versioned engines directory
- Removed openssl-ibmca-configure.patch. It doesn't seem to
be needed any longer.
- Added openssl-ibmca-fix-sha512-evp-digest-to-use-evp_md_flag_pkey_method_signature.patch (bsc#1032113)
- Added libica-tools to the BuildRequires due to repackaging of libica.
- Renamed BuildRequires from libica2-devel to libica-devel for the
same reason.
- Tweaked a comment to get rid of an rpmlint warning message.
- fixed ssl configuration merging (bsc#1004463)
- openssl-ibmca-fix-enginepath.patch: fix the engine path
- Use macro for configure (fate#319941)
- Use url for source
- Enable parallel building
- Cleanup spec file with spec-cleaner
- Upgraded to version 1.3.0 (fate#319941)
- Updated openssl-ibmca-configure.patch to apply cleanly
- Removed obsolete patches
- openssl-ibmca-README.patch
- openssl-ibmca-sha256-digest-length.patch
- openssl-pkey.patch
- openssl-des-ede.patch
- Did some spec file cleanup.
- Fixed %post script to update library path (the only dynamic part
of the ibmca configuration) every time the package is installed.
(bsc#966139)
- Updated AUTHORS, INSTALL, and README (bsc#942839)
- %post and %postun added to properly update openssl.cnf (bsc#942839)
- Updated to used libica2 == v2.4.2 for SLE12-SP1 (bsc#951138)
- Remove dependency on fillup anf insserv; the package provides
neither sysconfig file nor sysvinit script
- Remove depreciated AUTHORS section
- Use %configure macro
- Add openssl-ibmca-configure.patch
- the openssl engines moved to /%_lib/engines bnc#905480
- Forced requirement of libica-2_3_0 (bnc#890824)
- openssl-des-ede.patch: fixed a crash during benchmark (bnc#879922)
- openssl-pkey.patch: defer HMAC signing to pkey framework, fixes
fips self-test during EC key creation (bnc#879922)
- spec file cleaned up a bit
- openssl-ibmca-sha256-digest-length.patch: SHA256: Fixed message
digest length definition in sha256 template (bnc#868275)
- update to 1.2.0
- removed patches:
ibmca-configure.patch
ibmca-segfault.fix.patch
ibmca-sw-fix.patch
openssl-ibmca-1.0.0.rc2-memset-fix.patch
- make it exclusivearch for s390/s390x as the required libica
is only available for s390/s390x
- Made required libica-2_1_0 s390 specific
- Added x86_64 to ExclusiveArch as %ix86 doesn't do it
- Removed libica requirement - allowing build process to find it
- Added COPYING to %files
- Requiring libica 2.1.0 or greater
- enable ppc64le
- fix build (add autoconf automake libtool to BuildRequires)
- disable libtool --finish call
- own engines directory
- package baselibs.conf
- obsolete old -XXbit packages (bnc#437293)
- added baselibs.conf file to build xxbit packages
for multilib support
- added fixes by IBM (bug #243801):
ibmca-segfault.fix: rewrite ibmca_mod_expto remove improper use of BIGNUM
object
ibmca-sw-fix: rewrite ibmca_mod_exp_crtto remove improper use of BIGNUM
object
openssl-ibmca-1.0.0.rc2-memset-fix.patch: fix memory initialization problem
- updated README (bug #185508)
- Fixed configure.in to build correctly
- Fixed spec file
- Initial version from Mike Halcrow
OBS-URL: https://build.opensuse.org/request/show/962257
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=32
|
||
|
Dominique Leuenberger
|
babc73a7c0 |
Accepting request 919875 from security:tls
- Upgraded to version 2.2.1 (jsc#SLE-18333)
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginedir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
OBS-URL: https://build.opensuse.org/request/show/919875
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=37
|
||
|
Mark Post
|
15e938deea | OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=31 | ||
|
Mark Post
|
1d544502b1 | OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=30 | ||
|
Mark Post
|
52066f802c | OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=29 | ||
|
Mark Post
|
c55615e3ce | OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=28 | ||
|
Mark Post
|
0e4a3b4ec5 |
- Upgraded to version 2.2.1
* openssl-ibmca 2.2.1
Bug fixes
* openssl-ibmca 2.2.0
Implement fallbacks based on OpenSSL
Disable software fallbacks from libica
Allow to specify default library (libica vs. libica-cex) to use
Provide "libica" engine ctrl to switch library at load time
Update README.md
Remove libica link dependency
Generate sample configuration files from system configuration
Restructure registration global data
* openssl-ibmca 2.1.3
Bug fix
* openssl-ibmca 2.1.2
Bug fixes
- Modified spec file to
* Define a global variable enginedir the same was as IBM does
instead of _ENGINE_DIR as we had been doing.
* Implemented %make_build macro according to spec-cleaner
* Changed the package description to match IBM's.
* Removed the redundant "autoreconf --force --install"
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=27
|
||
|
Dominique Leuenberger
|
ee3a48b42e |
Accepting request 836412 from security:tls
- Upgrade to version 2.1.1 (jsc#SLE-13709) Changed Jira reference to the Epic and not the Team task. OBS-URL: https://build.opensuse.org/request/show/836412 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssl-ibmca?expand=0&rev=36 |
||
|
Mark Post
|
8b93ec06de | OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-ibmca?expand=0&rev=25 |