- Update to 7.2.1 (v7-stable), a pure bug-fixing release:
- bugfix: ruleset()-object did only support a single statement
- added -D rsyslogd option to enable config parser debug mode
- improved syntax error messages by outputting the error token
- the rsyslog core now suspeneds actions after 10 failures in
a row. This was former the case after 1,000 failures and could
cause rsyslog to be spammed/ressources misused.
See the v6 compatibility doc for more details.
- ommongodb rate-limits error messages to prevent spamming the
syslog closes (for v7.2):
http://bugzilla.adiscon.com/show_bug.cgi?id=366
- Enabled compilation of kmsg, the kernel’s new structured logging
system modile, mmaudit the message modification module supporting
Linux audit format and mmjsonparse providing the cee-enhanced
syslog format support message modification module.
- Update to 7.2.0 (v7-stable) a full structured-logging/CEE enabled
version which provides following features compared to v5-stable:
* greatly improved configuration language – the new language is
much more intuitive than the legacy format. It will also prevent
some typical mistakes simply be not permitting these invalid
constructs. Note that legacy format is still fully supported
(and you can of course do the same mistakes if you use legacy
format).
* greatly improved execution engine – with nested if/then/else
constructs as well as the capability to modify variables during
processing.
* full support for structured logging and project lumberjack/CEE.
this includes everything from being able to create, interpret
and handle JSON-based structured log messages, including the
OBS-URL: https://build.opensuse.org/request/show/139692
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/rsyslog?expand=0&rev=59
- bugfix: ruleset()-object did only support a single statement
- added -D rsyslogd option to enable config parser debug mode
- improved syntax error messages by outputting the error token
- the rsyslog core now suspeneds actions after 10 failures in
a row. This was former the case after 1,000 failures and could
cause rsyslog to be spammed/ressources misused.
See the v6 compatibility doc for more details.
- ommongodb rate-limits error messages to prevent spamming the
syslog closes (for v7.2):
http://bugzilla.adiscon.com/show_bug.cgi?id=366
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=106
version which provides following features compared to v5-stable:
* greatly improved configuration language – the new language is
much more intuitive than the legacy format. It will also prevent
some typical mistakes simply be not permitting these invalid
constructs. Note that legacy format is still fully supported
(and you can of course do the same mistakes if you use legacy
format).
* greatly improved execution engine – with nested if/then/else
constructs as well as the capability to modify variables during
processing.
* full support for structured logging and project lumberjack/CEE.
this includes everything from being able to create, interpret
and handle JSON-based structured log messages, including the
ability to normalize legacy text log messages.
* more plugins – like support for MongoDB, HDFS, and ElasticSearch
as well as for the kernel’s new structured logging system.
* higher performance – many optimizations all over the code, like
5 to 10 times faster execution time for script-based filters,
enhanced multithreaded TCP input plugin, DNS cache and many more.
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=104
multiple facilities with the same priority pattern in one
statement using the comma operator. This started to cause a
start failure with rsyslog-6.4.x (bnc#780607) and seems to
be a bug in rsyslog (upstream verify in progress).
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=96
- bugfix: multiple main queues with same queue file name were not
detected. This lead to queue file corruption. While the root
cause is a config error, it is a bug that this important and
hard to find config error was not detected by rsyslog.
- bugfix: “jsonf” property replacer option did generate invalid
JSON in JSON, we have “fieldname”:”value”, but the option
emitted “fieldname”=”value”. Interestingly, this was accepted
by a couple of sinks, most importantly elasticsearch. Now the
correct format is emitted, which causes a remote chance that
some things that relied on the wrong format will break.
Thanks to Miloslav Trmač for the patch
- change $!all-json did emit an empty (thus non-JSON) string if
no libee data was present. It now emits {} and thus valid JSON.
There is a small risk that this may break some things that
relied on the previous inconsistency. Thanks to Miloslav Trmač
for the patch
- bugfix: omusrsmsg incorrect return state & config warning
handling. During config file processing, Omusrmsg often
incorrectly returned a warning status, even when no warning was
present (caused by uninitialized variable). Also, the core
handled warning messages incorrectly, and treated them as
errors. As a result, omusrmsg (most often) could not properly be
loaded. Note that this only occurs with legacy config action
syntax. This was a regression caused by an incorrect merge in to
the 6.3.x codebase.
Thanks to Stefano Mason for alerting us of this bug.
- bugfix: Fixed TCP CheckConnection handling in omfwd.c. Interface
needed to be changed in lower stream classes. Syslog TCP Sending
is now resumed properly. Unfixed, that lead to non-detection of
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=93
- bugfix: ommysql did not properly init/exit the mysql runtime
library this could lead to segfaults. Triggering condition:
multiple action instances using ommysql. Thanks to Tomas
Heinrich for reporting this problem and providing an initial
patch (which my solution is based on, I need to add more code
to clean the mess up).
- bugfix: rsyslog did not terminate when delayable inputs were
blocked due to unvailable sources. Fixes:
http://bugzilla.adiscon.com/show_bug.cgi?id=299
Thanks to Marcin M for bringing up this problem and Andre
Lorbach for helping to reproduce and fix it.
- bugfix: active input in “light delay state” could block
rsyslog termination, at least for prolonged period of time
- bugfix: imptcp input name could not be set. Config directive
was accepted, but had no effect
bugfix: assigned ruleset was lost when using disk queues
This looked quite hard to diagnose for disk-assisted queues,
as the pure memory part worked well, but ruleset info was lost
for messages stored inside the disk queue.
- bugfix: hostname was not requeried on HUP
Thanks to Per Jessen for reporting this bug and Marius
Tomaschewski for his help in testing the fix.
- bugfix: inside queue.c, some thread cancel states were not
correctly reset. While this is a bug, we assume it did have
no practical effect because the reset as it was done was set
to the state the code actually had at this point. But better
fix this…
- Removed obsolete requery hostname patch
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=82
- bugfix: instabilities when using RFC5424 header fields
Thanks to Kaiwang Chen for the patch
- bugfix: imuxsock did truncate part of received message if it did
not contain a proper date. The truncation occured because we
removed that part of the messages that was expected to be the date.
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=295
- bugfix: potential abort after reading invalid X.509 certificate
closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290
Thanks to Tomas Heinrich for the patch
- bugfix: stats counter were not properly initialized on creation
- FQDN hostname for multihomed host was not always set to the correct
name if multiple aliases existed. Thanks to Tomas Heinreich for the
patch.
- updated to 5.8.6 [V5-stable]:
- bugfix: missing whitespace after property-based filter was not
detected
- bugfix: $OMFileFlushInterval period was doubled - now using correct
value
- bugfix: ActionQueue could malfunction due to index error
Thanks to Vlad Grigorescu for the patch
- bugfix: $ActionExecOnlyOnce interval did not work properly
Thanks to Tomas Heinrich for the patch
- bugfix: race condition when extracting program name, APPNAME,
structured data and PROCID (RFC5424 fields) could lead to invalid
characters e.g. in dynamic file names or during forwarding (general
malfunction ofthese fields in templates, mostly under heavy load)
- bugfix: imuxsock did no longer ignore message-provided timestamp,
if so configured (the *default*). Lead to no longer sub-second
timestamps.
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=76
file, marked the /etc/rsyslog.early.conf obsolete.
Note: rsyslog will be started early/before network using its normal
/etc/rsyslog.conf config file (adopted scripts in syslog-service
package). When any kind of remote logging is in use, then on-disk
queues should be enabled. To start it after the network, please set
the SYSLOG_REQUIRES_NETWORK=yes variable in /etc/sysconfig/syslog
(bnc#728565).
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=74
- update to 5.8.5 [V5-stable]
- bugfix/security: off-by-two bug in legacy syslog parser,
CVE-2011-3200 bnc#714658
- bugfix: mark message processing did not work correctly
- bugfix: potential hang condition during tag emulation
- bugfix: too-early string termination during tag emulation
- bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup
(msg.c)
- bugfix: fixed incorrect state handling for Discard Action
(transactions) Note: This caused all messages in a batch to be
set to COMMITTED, even if they were discarded.
OBS-URL: https://build.opensuse.org/request/show/81345
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/rsyslog?expand=0&rev=45
- bugfix/security: off-by-two bug in legacy syslog parser,
CVE-2011-3200 bnc#714658
- bugfix: mark message processing did not work correctly
- bugfix: potential hang condition during tag emulation
- bugfix: too-early string termination during tag emulation
- bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup
(msg.c)
- bugfix: fixed incorrect state handling for Discard Action
(transactions) Note: This caused all messages in a batch to be
set to COMMITTED, even if they were discarded.
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=71
- Update to 5.8.4 [V5-stable]
- bugfix: potential misadressing in property replacer
- bugfix: memcpy overflow can occur in allowed sender checkig if
a name is resolved to IPv4-mapped-on-IPv6 address Found by
Ismail Dönmez at suse
- bugfix: potential misadressing in property replacer
- bugfix: MSGID corruption in RFC5424 parser under some
circumstances closes:
http://bugzilla.adiscon.com/show_bug.cgi?id=275
- remove rsyslog-5.8.0-memcpy.patch:
applied upstream
- fix build for older distros:
only buildrequire systemd-devel for newer than 11.4, use systemd
for the others (forwarded request 79342 from darix)
OBS-URL: https://build.opensuse.org/request/show/79348
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/rsyslog?expand=0&rev=41
- Update to 5.8.4 [V5-stable]
- bugfix: potential misadressing in property replacer
- bugfix: memcpy overflow can occur in allowed sender checkig if
a name is resolved to IPv4-mapped-on-IPv6 address Found by
Ismail Dönmez at suse
- bugfix: potential misadressing in property replacer
- bugfix: MSGID corruption in RFC5424 parser under some
circumstances closes:
http://bugzilla.adiscon.com/show_bug.cgi?id=275
- remove rsyslog-5.8.0-memcpy.patch:
applied upstream
- fix build for older distros:
only buildrequire systemd-devel for newer than 11.4, use systemd
for the others
OBS-URL: https://build.opensuse.org/request/show/79342
OBS-URL: https://build.opensuse.org/package/show/Base:System/rsyslog?expand=0&rev=67
