- Update to new upstream release 1.41
* sg_zone: new utility for open, close and finish
zone commands introduced in zbc-r02
* sg_rep_zones and sg_reset_wp: change opcodes as
indicated in zbc-r02
* sg_read_buffer: add READ BUFFER(16) support (spc5r02)
* sg_logs: add --enumerate and acronyms
* allow decode from hex or binary in file
* decode environmental reporting + limits lpages
* sg_write_buffer: add --timeout=TO option
* sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
plus support for zoning service actions
* sg_lib: in Linux blocked devices yield ENXIO from
ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY
* clean up sg_warnings_stream handling
* sg_inq+sg_vpd: fix SCSI name string decoding in
device identification VPD page (0x83)
* increase sanity on Unit Serial number VPD page
* improve rdac vpd page reporting (vendor)
* sg_inq: improve NAA handling in dev_id VPD page
* update version descriptor list to 20150126
OBS-URL: https://build.opensuse.org/request/show/315568
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=51
- Update to new upstream release 1.39
* This release adds some ZBC support in the form of sg_rep_zones
and sg_reset_wp.
* It tracks changes made by www.t10.org since April 2014.
- Remove
0001-Split-59-scsi-sg_utils.rules-for-multipath-support.patch,
0003-sg_inq-compability-links-for-ata_id.patch,
0004-sg_inq-suppress-warning-messages-for-export.patch,
sginfo-inq-fields-strip-blank.patch (merged upstream).
OBS-URL: https://build.opensuse.org/request/show/237855
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=39
- Update to version 1.36
- sg_vpd: Protocol-specific port information VPD page
for SAS SSP, persistent connection (spl3r2), power
disable (spl3r3)
- block device characteristics: add FUAB bit
- sg_xcopy: handle more descriptor types; handle zero
maximum segment length; allow list IDs to be disabled;
improve skip/seek handling; allow xcopy on destination
- sg_reset: and --no-esc option to stop reset escalation
- clean up cli, add long option names
- sg_luns: add --test=ALUN option for decoding LUNs
- decoded luns output in decimal or hex (if -HH given)
- add '--linux' option to show Linux LUN after T10
representation, can map one to the other
- sg_inq: add --vendor option to show standard inquiry's
vendor specific fields in ASCII
- take resid into account with response output
- sg_sync: add --16 (for 16 byte command) and --timeout=
- sg_logs: add data compression page (ssc4)
- sg_sat_set_features: increase --lba from 1 to 4 bytes
- sg_write_same: add --ndob option (sbc3r35d)
- sg_map: mark as deprecated
- sginfo: mark as deprecated, especially -l (list)
- sg_lib: improve snprintf handling
- sg_lib_data: sync asc/ascq codes with T10 20130117
- sg_cmds (lib): if noisy given, give more UA info
- make code more C++ friendly
OBS-URL: https://build.opensuse.org/request/show/178508
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=25
- sg_compare_and_write: new utility
- sg_inq+sg_vpd: block device characteristics VPD page:
add product_type, WABEREQ, WACEREQ and VBULS fields
- sg_inq: more --export option changes for udev
- sg_vpd: add more rdac vendor specific vpd pages
- sg_verify: add --ebytchk option for sbc3r34 changes
- sg_stpg: --offline option: fix 'Invalid state 0xe'
- sg_ses: Door Lock element changed to Door element and
abbreviation changed from 'dl' to 'do' (ses3r05)
- archive/rescan-scsi-bus.sh: upgrade to version 1.53hr
- move rescan-scsi-bus.sh to scripts directory
- sync to sbc3r34
- sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field
- sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17
- clean up man page summary lines
- sg_xcopy: new dd like utility for extended copy command
- sg_copy_results: new utility for receive copy results
- sg_verify: add 16 byte cdb, bytchk (data-out buffer)
and group number support
- sync to spc4r36 and sbc3r32
- sg_inq: add --export so sg_inq can replace udev's scsi_id
- decode old EMC Symmetrix abuse of VPD page 0x83
- sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83
- sg_ses: increase max dpage response size to 64 KB
- allow ident,locate on enclosure controller
- more sanity for additional element status descriptor
- sg_sanitize: add --ause, --fail and --test=
- sg_luns: add long extended flat space addressing format
- sg_logs: add ATA pass-through results lpage (SAT-2)
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=19
- sg_ses: major rework of indexes (again), now two level
- sg_write_buffer: new --specific option for mode specific
field; new mode 13 (spc4r32)
- sg_vpd: add hp3par volume info vendor VPD page
- fix 'scsi ports' [0x88] page problem
- add 'sinq' pseudo page for standard inquiry response
- add power consumption page
- sg_format: add --poll= option for request sense polling
- improve handling of disks > 2 TB and DIF (protection)
- sg_logs: LB provision lpage extra (sbc3r28)
- sg_modes: application tag mpage subcode 0xf0->0x2
- sg_write_same: no prot fields when wrprotect=0
- sg_get_lba_status: reflect change in sbc3r25 to Parameter
Data Length response field (offset reduced from 8 to 4)
- sg_inq, sg_vpd: sync with spc4r33
- win32: change DataBufferOffset type per MSDN; caused
problem with 64 bit machines (with buffered interface)
- sg_luns: tweak documentation for vendor specific reports
- add man pages for scsi_loging_level, scsi_mandat,
scsi_satl and scsi_temperature
OBS-URL: https://build.opensuse.org/package/show/Base:System/sg3_utils?expand=0&rev=14
