Accepting request 397969 from Base:System

Automatic submission by obs-autosubmit OBS-URL: https://build.opensuse.org/request/show/397969 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/u-boot?expand=0&rev=75
2016-05-30 07:55:54 +00:00 · 2016-05-30 07:55:54 +00:00 · 475ab01269
commit 475ab01269
parent 51760cc5b2
89 changed files with 1053 additions and 296 deletions
--- a/0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+++ b/0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
@ -0,0 +1,40 @@
+From fabd591c6ba9c5ee5357d10c3284bf21ea585931 Mon Sep 17 00:00:00 2001
+From: Guillaume GARDET <guillaume.gardet@free.fr>
+Date: Wed, 18 May 2016 14:12:43 +0200
+Subject: [PATCH] video: ipu: Fix build with hard-float ARM toolchain
+
+Build with hard-float ARM toolchain was broken by commit 3cb4f25c: 
+'video: ipu: avoid overflow issue'.
+To fix it, we use do_div function.
+
+Build tested for mx6qsabrelite_defconfig.
+
+Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
+Cc: Peng Fan <van.freenix@gmail.com>
+Cc: Sandor Yu <sandor.yu@nxp.com>
+Cc: Anatolij Gustschin <agust@denx.de>
+Cc: Stefano Babic <sbabic@denx.de>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Cc: Tom Rini <trini@konsulko.com>
+
+---
+ drivers/video/ipu_common.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c
+index 36d4b23..e319c82 100644
+--- a/drivers/video/ipu_common.c
+++ b/drivers/video/ipu_common.c
+@@ -352,7 +352,8 @@ static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate)
+ 	 */
+ 	__raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id));
+ 
+-	clk->rate = (u64)(clk->parent->rate * 16) / div;
+	do_div(parent_rate, div);
+	clk->rate = parent_rate;
+ 
+ 	return 0;
+ }
+-- 
+1.8.4.5
+
--- a/0003-exynos-Set-CNTFRQ.patch
+++ b/0003-exynos-Set-CNTFRQ.patch
@ -1,39 +0,0 @@
-From a5026e4f60cc43cc9d5e685643f306140b53ba03 Mon Sep 17 00:00:00 2001
-From: Alexander Graf <agraf@suse.de>
-Date: Mon, 1 Feb 2016 21:41:06 +0100
-Subject: [PATCH 3/3] exynos: Set CNTFRQ
-
-Commit 73a1cb27 moved the check whether we should set the architected
-timer frequency from CONFIG_SYS_CLK_FREQ to CONFIG_TIMER_CLK_FREQ, but
-did not update all users of it.
-
-The one where I (finally) realized why KVM didn't work is the Arndale
-board, so this patch adds the respective define to it.
-
-Signed-off-by: Alexander Graf <agraf@suse.de>
-Fixes: 73a1cb27
-
---
-
-v1 -> v2:
-
-  - Map to CONFIG_SYS_CLK_FREQ instead of redefining to the same number
---
- include/configs/exynos-common.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
-index f97f03c..98474d3 100644
--- a/include/configs/exynos-common.h
-+++ b/include/configs/exynos-common.h
-@@ -29,6 +29,7 @@
- 
- /* input clock of PLL: 24MHz input clock */
- #define CONFIG_SYS_CLK_FREQ		24000000
-+#define CONFIG_TIMER_CLK_FREQ		CONFIG_SYS_CLK_FREQ
- 
- #define CONFIG_SETUP_MEMORY_TAGS
- #define CONFIG_CMDLINE_TAG
-- 
-1.8.5.6
-
--- a/u-boot-2016.05-rc3.tar.bz2
+++ b/u-boot-2016.05-rc3.tar.bz2
@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:ce7380814b4c399f10323d799677853efc731d888d4eff359f78f52aeb27bbc7
-size 11342439
--- a/u-boot-2016.05.tar.bz2
+++ b/u-boot-2016.05.tar.bz2
@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:87d02275615aaf0cd007b54cbe9fbadceef2bee7c79e6c323ea1ae8956dcb171
+size 11325053
--- a/u-boot-a10-olinuxino-lime.changes
+++ b/u-boot-a10-olinuxino-lime.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a10-olinuxino-lime.spec
+++ b/u-boot-a10-olinuxino-lime.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a10-olinuxino-lime
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a10-olinuxino-lime platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-a13-olinuxino.changes
+++ b/u-boot-a13-olinuxino.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a13-olinuxino.spec
+++ b/u-boot-a13-olinuxino.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a13-olinuxino
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a13-olinuxino platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-a13-olinuxinom.changes
+++ b/u-boot-a13-olinuxinom.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a13-olinuxinom.spec
+++ b/u-boot-a13-olinuxinom.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a13-olinuxinom
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a13-olinuxinom platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-a20-olinuxino-lime.changes
+++ b/u-boot-a20-olinuxino-lime.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a20-olinuxino-lime.spec
+++ b/u-boot-a20-olinuxino-lime.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a20-olinuxino-lime
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a20-olinuxino-lime platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-a20-olinuxino-lime2.changes
+++ b/u-boot-a20-olinuxino-lime2.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a20-olinuxino-lime2.spec
+++ b/u-boot-a20-olinuxino-lime2.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a20-olinuxino-lime2
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a20-olinuxino-lime2 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-a20-olinuxinomicro.changes
+++ b/u-boot-a20-olinuxinomicro.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-a20-olinuxinomicro.spec
+++ b/u-boot-a20-olinuxinomicro.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-a20-olinuxinomicro
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the a20-olinuxinomicro platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-am335xboneblack.changes
+++ b/u-boot-am335xboneblack.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-am335xboneblack.spec
+++ b/u-boot-am335xboneblack.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-am335xboneblack
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the am335xboneblack platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-am335xevm.changes
+++ b/u-boot-am335xevm.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-am335xevm.spec
+++ b/u-boot-am335xevm.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-am335xevm
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the am335xevm platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-am57xxevm.changes
+++ b/u-boot-am57xxevm.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-am57xxevm.spec
+++ b/u-boot-am57xxevm.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-am57xxevm
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the am57xxevm platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-am57xxevmnodt.changes
+++ b/u-boot-am57xxevmnodt.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-am57xxevmnodt.spec
+++ b/u-boot-am57xxevmnodt.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-am57xxevmnodt
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the am57xxevmnodt platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-arndale.changes
+++ b/u-boot-arndale.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-arndale.spec
+++ b/u-boot-arndale.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-arndale
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the arndale platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-bananapi.changes
+++ b/u-boot-bananapi.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-bananapi.spec
+++ b/u-boot-bananapi.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-bananapi
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the bananapi platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-clearfog.changes
+++ b/u-boot-clearfog.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-clearfog.spec
+++ b/u-boot-clearfog.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-clearfog
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the clearfog platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-colibrit20.changes
+++ b/u-boot-colibrit20.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-colibrit20.spec
+++ b/u-boot-colibrit20.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-colibrit20
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the colibrit20 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-cubieboard.changes
+++ b/u-boot-cubieboard.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-cubieboard.spec
+++ b/u-boot-cubieboard.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-cubieboard
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the cubieboard platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-cubieboard2.changes
+++ b/u-boot-cubieboard2.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-cubieboard2.spec
+++ b/u-boot-cubieboard2.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-cubieboard2
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the cubieboard2 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-cubietruck.changes
+++ b/u-boot-cubietruck.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-cubietruck.spec
+++ b/u-boot-cubietruck.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-cubietruck
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the cubietruck platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-firefly-rk3288.changes
+++ b/u-boot-firefly-rk3288.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-firefly-rk3288.spec
+++ b/u-boot-firefly-rk3288.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-firefly-rk3288
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the firefly-rk3288 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-highbank.changes
+++ b/u-boot-highbank.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-highbank.spec
+++ b/u-boot-highbank.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-highbank
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the highbank platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-hyundaia7hd.changes
+++ b/u-boot-hyundaia7hd.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-hyundaia7hd.spec
+++ b/u-boot-hyundaia7hd.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-hyundaia7hd
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the hyundaia7hd platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-jetson-tk1.changes
+++ b/u-boot-jetson-tk1.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-jetson-tk1.spec
+++ b/u-boot-jetson-tk1.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-jetson-tk1
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the jetson-tk1 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-melea1000.changes
+++ b/u-boot-melea1000.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-melea1000.spec
+++ b/u-boot-melea1000.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-melea1000
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the melea1000 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-merriia80optimus.changes
+++ b/u-boot-merriia80optimus.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-merriia80optimus.spec
+++ b/u-boot-merriia80optimus.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-merriia80optimus
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the merriia80optimus platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-mx53loco.changes
+++ b/u-boot-mx53loco.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-mx53loco.spec
+++ b/u-boot-mx53loco.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-mx53loco
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the mx53loco platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-mx6cuboxi.changes
+++ b/u-boot-mx6cuboxi.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-mx6cuboxi.spec
+++ b/u-boot-mx6cuboxi.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-mx6cuboxi
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the mx6cuboxi platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-mx6qsabrelite.changes
+++ b/u-boot-mx6qsabrelite.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-mx6qsabrelite.spec
+++ b/u-boot-mx6qsabrelite.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-mx6qsabrelite
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the mx6qsabrelite platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-odroid-xu3.changes
+++ b/u-boot-odroid-xu3.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-odroid-xu3.spec
+++ b/u-boot-odroid-xu3.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-odroid-xu3
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the odroid-xu3 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-odroid.changes
+++ b/u-boot-odroid.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-odroid.spec
+++ b/u-boot-odroid.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-odroid
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the odroid platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-omap3beagle.changes
+++ b/u-boot-omap3beagle.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-omap3beagle.spec
+++ b/u-boot-omap3beagle.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-omap3beagle
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the omap3beagle platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-omap4panda.changes
+++ b/u-boot-omap4panda.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-omap4panda.spec
+++ b/u-boot-omap4panda.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-omap4panda
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the omap4panda platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-orangepipc.changes
+++ b/u-boot-orangepipc.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-orangepipc.spec
+++ b/u-boot-orangepipc.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-orangepipc
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the orangepipc platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-p2371-2180.changes
+++ b/u-boot-p2371-2180.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-p2371-2180.spec
+++ b/u-boot-p2371-2180.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-p2371-2180
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the p2371-2180 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-paz00.changes
+++ b/u-boot-paz00.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-paz00.spec
+++ b/u-boot-paz00.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-paz00
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the paz00 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-pcm051rev3.changes
+++ b/u-boot-pcm051rev3.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-pcm051rev3.spec
+++ b/u-boot-pcm051rev3.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-pcm051rev3
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the pcm051rev3 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-qemu-ppce500.changes
+++ b/u-boot-qemu-ppce500.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-qemu-ppce500.spec
+++ b/u-boot-qemu-ppce500.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-qemu-ppce500
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the qemu-ppce500 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-rpi.changes
+++ b/u-boot-rpi.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-rpi.spec
+++ b/u-boot-rpi.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-rpi
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the rpi platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-rpi2.changes
+++ b/u-boot-rpi2.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-rpi2.spec
+++ b/u-boot-rpi2.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-rpi2
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the rpi2 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-rpi3.changes
+++ b/u-boot-rpi3.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-rpi3.spec
+++ b/u-boot-rpi3.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-rpi3
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the rpi3 platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-snow.changes
+++ b/u-boot-snow.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-snow.spec
+++ b/u-boot-snow.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-snow
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the snow platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-spring.changes
+++ b/u-boot-spring.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-spring.spec
+++ b/u-boot-spring.spec
@ -28,10 +28,10 @@
 %define udoo_spl 0

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-spring
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the spring platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot-udoo.changes
+++ b/u-boot-udoo.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot-udoo.spec
+++ b/u-boot-udoo.spec
@ -28,10 +28,10 @@
 %define udoo_spl 1

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-udoo
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the udoo platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"
--- a/u-boot.changes
+++ b/u-boot.changes
@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Wed May 18 13:07:24 UTC 2016 - afaerber@suse.de
+
+- Fix rpi3 installation location
+
+-------------------------------------------------------------------
+Wed May 18 12:22:31 UTC 2016 - guillaume@opensuse.org
+
+- Add 0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
+  to fix build on iMX boards (with hard-float toolchains)
+
+-------------------------------------------------------------------
+Tue May 17 12:53:24 UTC 2016 - guillaume@opensuse.org
+
+- Update to 2016.05
+- Remove upstreamed patch:
+  * 0003-exynos-Set-CNTFRQ.patch
+
 -------------------------------------------------------------------
 Wed May  4 20:22:57 UTC 2016 - afaerber@suse.de

--- a/u-boot.spec
+++ b/u-boot.spec
@ -19,10 +19,10 @@


 # 'archive_version' differs from 'version' for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        Tools for the U-Boot Firmware
 License:        GPL-2.0
--- a/u-boot.spec.in
+++ b/u-boot.spec.in
@ -28,10 +28,10 @@
 %define udoo_spl UDOO_SPL

 # archive_version differs from version for RC version only
-%define archive_version 2016.05-rc3
+%define archive_version 2016.05

 Name:           u-boot-BOARDNAME
-Version:        2016.05~rc3
+Version:        2016.05
 Release:        0
 Summary:        The U-Boot firmware for the BOARDNAME platform
 License:        GPL-2.0
@ -44,8 +44,8 @@ Source300:      u-boot-rpmlintrc
 Patch1:         0001-XXX-openSUSE-XXX-Load-dtb-from-partition-2.patch
 # Move omap3 to distro boot method
 Patch2:         0002-XXX-openSUSE-XXX-omap3-Move-to-distro-bootcmd.patch
-# Fix exynos KVM support
-Patch3:         0003-exynos-Set-CNTFRQ.patch
+# UPSTREAM: Fix build with hard-float ARM toolchain (Fix iMX boards)
+Patch3:         0001-video-ipu-Fix-build-with-hard-float-ARM-toolchain.-I.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 # Arndale board need DTC >= 1.4
 BuildRequires:  bc
@ -55,7 +55,7 @@ BuildRequires:  dtc >= 1.4.0
 BuildRequires:  qemu
 Provides:       qemu-ppc:%{_datadir}/qemu/u-boot.e500
 %endif
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 # Owns /boot/vc directory
 BuildRequires:  raspberrypi-firmware
 %endif
@ -103,7 +103,7 @@ done
 export NO_BRP_STRIP_DEBUG=true
 export NO_DEBUGINFO_STRIP_DEBUG=true
 %define uboot_dir /boot
-%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2"
+%if "%{name}" == "u-boot-rpi" || "%{name}" == "u-boot-rpi2" || "%{name}" == "u-boot-rpi3"
 %define uboot_dir /boot/vc
 %endif
 %if "%{name}" == "u-boot-qemu-ppce500"