Update submodules from pool/perl-Perl-Tidy#1 and create patchinfo.20260129102824525983.93181000773252/_patchinfo

.gitmodules

@@ -9494,10 +9494,6 @@
 	path = lua-cosmo
 	url = ../../pool/lua-cosmo
 	branch = leap-16.0
-[submodule "lua-editorconfig-core-lua"]
-	path = lua-editorconfig-core-lua
-	url = ../../pool/lua-editorconfig-core-lua
-	branch = leap-16.0
 [submodule "lua-fennel"]
 	path = lua-fennel
 	url = ../../pool/lua-fennel
@@ -9562,10 +9558,6 @@
 	path = lua-mpack
 	url = ../../pool/lua-mpack
 	branch = leap-16.0
-[submodule "lua-penlight"]
-	path = lua-penlight
-	url = ../../pool/lua-penlight
-	branch = leap-16.0
 [submodule "lua-readline"]
 	path = lua-readline
 	url = ../../pool/lua-readline

patchinfo.20260129102824525983.93181000773252/_patchinfo

@@ -0,0 +1,407 @@
+<patchinfo>
+  <packager>tinita</packager>
+  <rating>moderate</rating>
+  <category>recommended</category>
+  <summary>Recommended update for perl-Perl-Tidy</summary>
+  <description>This update for perl-Perl-Tidy fixes the following issues:
+
+Changes in perl-Perl-Tidy:
+
+- updated to 20260109.0.0 (20260109)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2026 01 09
+      - A new parameter --break-at-old-trailing-loops, or -botl, keeps
+        existing line breaks at these trailing loop control keywords:
+           'for', 'foreach', 'while', 'until'.
+        This is the default. For example, given the following two input lines:
+          FindExt::scan_ext("../$_")
+            foreach qw(cpan dist ext);
+        The new default keeps two lines. The previous version flattened the
+        statement, since it fits on a single line:
+          FindExt::scan_ext("../$_") foreach qw(cpan dist ext);
+        Use -nbotl to deactivate this new option.
+      - A related new parameter --break-at-old-trailing-conditionals, or -botc
+        keeps existing line breaks at trailing conditional control keywords:
+            'if', 'unless'.
+        This is the default.  The capability was previously handled by
+        parameter --break-at-old-logical-breakpoints, or -bol, which was also
+        true by default, but which also also controls logical breakpoints,
+        such as '&amp;&amp;'. This change simplifies the input.
+        Use -nbotc to deactivate this option.
+      - A new switch --blanks-before-opening-comments, -bboc, has been added
+        for issue git #192.  This is on by default and allows perltidy to insert
+        a blank line before full-line comments which start at a new indentation
+        level.  Use the negated form to prevent such blank lines, -nbboc
+        or --noblanks-before-opening-comments
+      - A new parameter --dump-keyword-usage, or -dku, can be used to dump a
+        list of the the perl builtin keywords used in a file. A companion flag
+        --dump-keyword-usage-list=s can be used to give a specific list of
+        keywords or user functions to be included in the list.
+      - When the -html option is used with the default --pod2html setting,
+        perltidy will look for a pod-to-html formatter in this order:
+        Pod::Simple::XHTML, Pod::Simple::HTML, and Pod::Html.  A preferred
+        formatter can be selected with --use-pod-formatter=s. Previously
+        the only option was Pod::Html, and it can still be selected with
+        --use-pod-formatter="Pod::Html". The reason for this update is
+        that this older formatter has limitations, and requires the
+        creation of a temporary file for data transfer. This update also
+        allows formatting of pod text containing non-ascii characters.
+      - When perltidy is run with the -html option, and pod is rendered to html
+        with Pod::Html, the pod2html option 'backlink' could not be set in
+        in previous versions due to a programming error. This has been fixed.
+        This setting can now be made by giving perltidy the flag '--podbacklink'.
+      - The default for --timeout-in-seconds is reduced from 10 to 5 seconds.
+        A default value of 10 seemed excessive. It can be changed with -tos=n.
+      - The option --delete-weld-interfering-commas, or -dwic, has been
+        made much more accurate. It now makes fewer unnecessary comma deletions.
+      - This version does more extensive checking of all string input parameters
+        and will exit early on an error.  The intention is to catch input errors
+        as early as possible.
+      - Fixed issue with --dump-mixed-call-parens. A trailing statement modifier
+        such as the following 'if' was incorrectly being counted as having parens:
+          return $class if ($old_quote - $new_quote) == 0;
+
+- updated to 20250912.0.0 (20250912)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 09 12
+      - Fix git #191, where a new check to escape whitespace in a qw() quote
+        in perl-5.43.2 caused Perl::Tidy to emit unwanted warning messages.
+      - A new output field for the --dump-block-summary command gives
+        the number of lines of comments and pod in a block.  For subs and
+        anonymous subs, the existence of header comments is also indicated.
+      - Added --dump-nested-ternaries, --warn-nested-ternaries, and
+        --nested-ternary-maximum-depth=n. These can be used to locate
+        nested ternary statements in a script.
+      - For the --line-up-parentheses option, a line length tolerance was
+        adjusted by 1 character to help keep table formatting unchanged when
+        adding and deleting trailing commas.  This can occasionally change
+        formatting of some small lists when formatted with -lp.
+      - In hash key lists which have side comments after sub blocks,
+        long lines which were previously broken before a comma may now
+        be broken after a previous '=&gt;'. This change was made to
+        fix a very rare stability problem. For example:
+        OLD:
+          '+' =&gt; sub { $turtle-&gt;turn( $changes-&gt;{"dtheta"} ); }
+          ,               # Turn clockwise
+        NEW:
+          '+' =&gt;
+              sub { $turtle-&gt;turn( $changes-&gt;{"dtheta"} ); },    # Turn clockwise
+      - Fixed undefined variable reference when --dump-block-summary was
+        run with --dump-block-types='package'. The dump was okay, but
+        an error message like the following was emitted:
+        Use of uninitialized value $seqno in hash element ...
+      - The parameter --integer-range-check no longer accepts a 0 value, which
+        allowed integer range checks to be skipped.  This option was included
+        temporarily when new range-checking code was added to provide a
+        workaround in case problems arose with the new logic.  No problems have
+        been encountered, so this has been removed.
+
+- updated to 20250711.0.0 (20250711)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 07 11
+      - Update for issue git #187: add vertical alignment of colons
+        used as attribute separators. These colons have token type 'A',
+        and this vertical alignment will be on by default (since all
+        vertical alignments occur by default).  For example:
+          # old default
+          field $tile_size : param;
+          field $bar : reader : writer;
+          # new default with alignment of token type 'A'
+          field $tile_size  : param;
+          field $bar        : reader : writer;
+        This alignment can be turned off to recover the previous formatting
+        with --valign-exclusion-list='A', or -vxl='A'.
+      - Update for issue git #186: if a closing format skipping comment
+        '#&gt;&gt;&gt;' is encountered before any '#&lt;&lt;&lt;' is seen, then format
+        skipping is assumed to start with the first line of the file.
+        Use --nodetect-format-skipping-from-start or -ndfsfs to prevent
+        this check.
+      - Added option --code-skipping-from-start, or -csfs. This causes
+        code-skipping to begin from the start of a file even though there
+        is no starting marker comment, '#&lt;&lt;V'.
+      - Fixed a bug involving the --format-skipping option. If a line in
+        the skipped code had trailing blanks, then the newline at the end
+        of that line was lost.
+      - Added a check to insure that format skipping begin and end markers
+        strictly alternate along the lines of a file. If these markers
+        do not alternate, a warning occurs and formatting is skipped.
+        This is intended to help catch errors.
+      - For lists which contain here docs and which are formatted with
+        the --line-up-parentheses option, the formatting may in some
+        cases change to more closely follow the -lp style.
+
+- updated to 20250616.0.0 (20250616)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 06 16
+      - Added support for the assigning logical xor ^^= operator
+      - For input parameters which allow a paren type to be selected, the
+        selection 'f' (function call) now includes functions called with
+        a direct arrow before the paren, '-&gt;('. This was an oversight which
+        has been corrected.
+      - A new parameter --break-at-old-comma-types=s, or -boct=s, allows the
+        parameter --break-at-old-comma-breakpoints (-boc) to be limited to
+        selected container types.  For example, -boc -boct='f(' means break
+        at old commas but only if they are function call lists.
+      - A new parameter --cuddled-paren-brace-weld, or -cpbw, has been added to
+        handle issue git #184. This modifies --cuddled-paren-brace by
+        preventing a paren and following brace from getting separated in
+        certain situations. The difference is illustrated here:
+          # perltidy -cpb alone has no effect for this short snippet:
+          if (   $Kouter_opening == $Kfirst
+              &amp;&amp; $has_tight_paren{$type_prev} )
+          {
+              $Kref = $Kprev;
+          }
+          # perltidy -cpb -cpbw keeps the closing paren next to the opening brace:
+          if (
+                 $Kouter_opening == $Kfirst
+              &amp;&amp; $has_tight_paren{$type_prev}
+          ) {
+              $Kref = $Kprev;
+          }
+      - The parameter --maximum-fields-per-table, or -mft, now accepts a string
+        input which can limit its application to certain containers. For
+        example, -mft='f(1' means that function call lists should be formatted
+        with just 1 item per line. It has no effect on other tables. The
+        manual has further information.
+      - Add option --break-open-compact-parens=s, discussed in git #78.
+        This changes the default formatting for lists which would normally
+        be displayed compactly on two lines. It causes them to be formatted
+        in the same way as long lists, with line breaks at the opening and
+        closing parentheses.
+      - Add option --skip-formatting-except-id=NAME, or -sfei=NAME, discussed
+        in git #183.  This allows formatting to apply only to lines tagged
+        with #&lt;&lt;&lt; id=NAME, where NAME is a user-defined tag. The special
+        variation -sfei='-' can be used to run perltidy with full checking
+        but without any formatting changes.
+      - A relatively rare problem with the formatting combination -xci and -lp or
+        -xlp has been fixed.  Some lines had more leading spaces that intended.
+      - New option -m added to --dump-mismatched-returns and
+        --warn-mismatched-returns. This checks for multiple array
+        return sizes. A warning occurs when a sub has multiple returns
+        of finite lists with different counts greater than 1, and
+        not all of them are matched with calls.
+      - Improved support for Object::Pad, see git #182.
+      - A limitation on the treatment  of lexical subs has been fixed. Previously,
+        a lexical sub with the same name as a quote operator would produce a warning,
+        and might cause a tokenization error.
+      - Here targets in quotes are now located and handled correctly.
+
+- updated to 20250311.0.0 (20250311)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 03 11
+      - The options --want-call-parens and --nowant-call-parens were accidentally
+        being skipped in version 20250214. This has been fixed.
+      - Fixed git #32, a tokenization error with message "hit EOF seeking end of
+        quote/pattern" for a function call without paren or arg before a
+        ternary operator.
+      - A new option --dump-similar-keys will dump hash keys which are
+        similar but slightly different to standard output and then exit.
+        A related option --warn-similar-keys will report keys with are similar
+        to the error output while formatting. Both of these can be controlled
+        by parameters which are described in the input manual.
+      - A new option --dump-hash-keys will dump all hash keys found by
+        perltidy to standard output.
+      - The output table for --dump-block-summary has an additional field.
+        It is an alternate McCabe complexity count which is the same as
+        the previous count except for subs. For subs, the complexity number
+        is reduced by the values for any contained anonymous subs.
+      - Fix git #181, remove continuation indentation from closing brace
+        of an anonymous sub which terminates an input stream.
+
+- updated to 20250214.0.0 (20250214)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 02 14
+      - A new option --keep-old-blank-lines-exceptions=s, or --kblx=s,
+        allows selected blank lines to be ignored when an input stream
+        is read. The parameter s is used to select the blank lines to
+        be ignored. This option provides an inverse to other blank line
+        parameters. The manual has details. See discussion git #180.
+      - A new option --warn-unused-keys, or -wuk, has been added which will
+        produce warnings for unused hash keys during formatting. This is similar
+        to --dump-unused-keys, which just exits and does not continue formatting.
+        A related new parameter --warn-unused-keys-cutoff=N provides control
+        over a filter which prevents warnings for keys which appear to be
+        members of large hashes used to communicate with external packages.
+        The manual has details.  See git #177.
+      - A new option --pack-opening-types='-&gt;' has been added to provide more
+        control over breaks of method call chains.  It tells perltidy not to
+        break at every method call when a chain of calls spans multiple lines.
+        This was the behavior in versions prior to 20250105. The default
+        starting with 20250105 is to break at each call of a method call chain
+        which spans multiple lines. See git #171.
+
+- updated to 20250105.0.0 (20250105)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2025 01 05
+      - If a file consists only of comments, then the starting indentation will
+        be guessed from the indentation of the first comment. Previously it would
+        be guessed to be zero. Parameter --starting-indentation-level=n can be
+        used to specify an indentation and avoid a guess. This issue can
+        arise when formatting a block of comments from within an editor.
+      - Added missing 'use File::Temp' for -html option. This was causing the
+        message: "Undefined subroutine &amp;File::Temp::tempfile called at ..."
+        See git #176.
+      - A new parameter --dump-unique-keys, or -duk, dumps a list of hash keys
+        which appear to be used just once, and do not appear among the quoted
+        strings in a file. For example:
+           perltidy -duk File.pm &gt;output.txt
+        This can help locate misspelled hash keys.
+      - Line breaks at long chains of method calls now break at all calls
+        with args in parens, as in this example from git #171
+          # Old default
+          sub bla_p( $value = 42 ) {
+              return Mojo::Promise-&gt;resolve($value)-&gt;then( sub { shift() / 2 } )
+                -&gt;then( sub { shift() + 6 } )-&gt;then( sub { shift() / 2 } )
+                -&gt;catch( sub { warn shift } );
+          }
+          # New default
+          sub bla_p( $value = 42 ) {
+              return Mojo::Promise-&gt;resolve($value)
+                -&gt;then( sub { shift() / 2 } )
+                -&gt;then( sub { shift() + 6 } )
+                -&gt;then( sub { shift() / 2 } )
+                -&gt;catch( sub { warn shift } );
+          }
+      - Parameter --break-at-old-method-breakpoints, or -bom, has been
+      updated to insure that it only applies to lines beginning with
+      method calls, as intended.  Line breaks for all lines beginning with
+      '-&gt;', even non-method calls, can be retained by using
+      --keep-old-breakpoints_before='-&gt;'.
+      - Added parameter --multiple-token-tightness=s, or -mutt=s.
+      The default value --paren-tightness=1 adds space within the parens
+      if, and only if, the container holds multiple tokens.  Some perltidy
+      tokens may be rather long, and it can be preferable to also space some of
+      them as if they were multiple tokens.  This can be done with this parameter,
+      and it applies to parens as well as square brackets and curly braces.
+      For example, the default below has no space within the square brackets:
+          # perltidy
+          my $rlist = [qw( alpha beta gamma )];
+      Spaces can be obtained with:
+          # perltidy -mutt='q*'
+          my $rlist = [ qw( alpha beta gamma ) ];
+      The parameter -mutt='q*' means treat qw and similar quote operators as
+      multiple tokens.  The manual has details; git #120 has another example.
+      - Added parameter --indent-leading-semicolon, -ils; see git #171. When
+      this is negated, a line with a leading semicolon does not get the extra
+      leading continuation indentation spaces (defined with -ci=n).
+      - Space around here doc delimiters follow spacing controls better. For
+      example, a space is now added before the closing paren here:
+         OLD: (without the here doc):
+         push( @script, &lt;&lt;'EOT');
+         NEW:
+         push( @script, &lt;&lt;'EOT' );
+      Also, any spaces between the '&lt;&lt;' and here target are removed (git #174):
+         OLD:
+         push( @script, &lt;&lt;  'EOT');
+         NEW:
+         push( @script, &lt;&lt;'EOT' );
+      - Added parameter --break-at-trailing-comma-types=s, or -btct=s, where
+      s is a string which selects trailing commas.  For example, -btct='f(b'
+      places a line break after all bare trailing commas in function calls.
+      The manual has details.
+      - Fix git #165, strings beginning with v before =&gt; gave an incorrect error
+      message.
+      - The parameter --add-lone-trailing-commas, -altc, is now on by default.
+      This will simplify input for trailing comma operations. Use
+      --noadd-lone-trailing-commas, or -naltc to turn it off.
+      - More edge cases for adding and deleting trailing commas are now handled
+      (git #156).
+      - A problem has been fixed in which the addition or deletion of trailing
+      commas with the -atc or -dtc flags did not occur due to early convergence
+      when the -conv flag was set (git #143).
+      - Added parameter --qw-as-function, or -qwaf, discussed in git #164.
+      When this parameter is set, a qw list which begins with 'qw(' is
+      formatted as if it were a function call with call args being a list
+      of comma-separated quoted items. For example, given this input:
+      @fields = qw( $st_dev	   $st_ino    $st_mode $st_nlink   $st_uid
+        $st_gid $st_rdev    $st_size $st_atime   $st_mtime  $st_ctime
+        $st_blksize $st_blocks);
+      # perltidy -qwaf
+      @fields = qw(
+          $st_dev   $st_ino   $st_mode  $st_nlink
+          $st_uid   $st_gid   $st_rdev  $st_size
+          $st_atime $st_mtime $st_ctime $st_blksize
+          $st_blocks
+      );
+
+- updated to 20240903.0.0 (20240903)
+   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md
+
+  ## 2024 09 03
+      - Add partial support for Syntax::Operator::In and Syntax::Keyword::Match
+        (see git #162).
+      - Add --timeout-in-seconds=n, or -tos=n.  When the standard input supplies
+        the input stream, and the input has not been received within n seconds,
+        perltidy will end with a timeout message.  The intention is to catch
+        a situation where perltidy is accidentally invoked without a file to
+        process and therefore waits for input from the system standard input
+        (stdin), which never arrives.  The default is n=10.
+        This check can be turned off with -tos=0.
+      - Add parameter --closing-side-comment-exclusion-list=string, or
+        -cscxl=string, where string is a list of block types to exclude
+        for closing side comment operations.  Also, closing side comments
+        now work for anonymous subs if a --closing-side-comment-list (-cscl)
+        is not specified, and when 'asub' is requested with -cscl=asub.
+        Use -cscxl=asub to prevent this.
+      - Include check for unused constants in --dump-unusual-variables and
+        --warn-variable-types (new issue type 'c'). Also expand checks to
+        cover variables introduced with 'use vars'.
+      - Include signature variables in --dump-unusual-variables and
+        --warn-variable-types; see git #158.
+      - Add logical xor operator ^^ available in perl version 5.40, as
+        noted in git #157.
+      - Keyword 'state' now has default space before a paren, like 'my'.
+        Previously there was no space and no control.  So the default
+        is now "state ($x)". This space can be removed with -nsak='state'.
+      - Add options --add-lone-trailing-commas, -altc and
+        --delete-lone-trailing-commas, -dltc, to provide control over adding
+        and deleting the only comma in a list.  See discussion in git #143
+        and the updated manual.
+      - Add options --dump-mismatched-returns (or -dmr) and
+        --warn-mismatched-returns (or -wmr).  These options report function
+        calls where the number of values requested may disagree with sub
+        return statements.  The -dump version writes the results for a single
+        file to standard output and exits:
+           perltidy -dmr somefile.pl &gt;results.txt
+        The -warn version formats as normal but reports any issues as warnings in
+        the error file:
+           perltidy -wmr somefile.pl
+        The -warn version may be customized with the following additional
+        parameters if necessary to avoid needless warnings:
+        --warn-mismatched-return-types=s (or -wmrt=s),
+        --warn-mismatched-return-exclusion-list=s (or -wmrxl=s)
+        where 's' is a control string. These are explained in the manual.
+      - Updates for issue git #151:
+        (1) --warn-variable-types=u is now okay if a named file is processed.
+        (2) --warn-variable-exclusion-list=s now allows leading and/or
+        trailing * on variable names to allow a wildcard match. For example
+        -wvxl='*_unused' is okay and would match $var1_unused and $var2_unused.
+        (3) --dump-unusual-variables now outputs the filename.
+      - A option was added to filter unimplemented parameters from perltidy
+        configuration files, suggested in git #146.  It works like this: if
+        a line in the config file begins with three dashes followed by a
+        parameter name (rather than two dashes), then the line will be removed
+        if the parameter is unknown. Otherwise, a dash will be removed to make
+        the line valid.
+      - Parameters --dump-mismatched-args (or -dma) and
+        --warn-mismatched-args (or -wma) have been updated to catch more
+        arg count issues.
+      - Fixed issue git #143, extend -add-trailing-commas to apply to a list
+        with just a fat comma.
+      - The minimum perl version is 5.8.1. Previously it was 5.8.0, which was
+        not correct because of the use of utf8::is_utf8.
+      - Fixed issue git #142, test failure installing on perl versions before
+        version 5.10.  The error caused the new parameter
+        -interbracket-arrow-style=s not to work. Except for this limitation,
+        Version 20240511 will work on older perl versions.
+</description>
+  <package>perl-Perl-Tidy</package>
+</patchinfo>

patchinfo.20260129192137252985.93181000773252/_patchinfo

@@ -1,18 +0,0 @@
-<patchinfo>
-  <packager>eroca</packager>
-  <rating>moderate</rating>
-  <category>recommended</category>
-  <summary>Recommended update for lua-penlight, lua-editorconfig-core-lua</summary>
-  <description>This update for lua-penlight, lua-editorconfig-core-lua fixes the following issues:
-
-Introduce lua-penlight and lua-editorconfig-core-lua.
-</description>
-  <package>lua-penlight</package>
-  <package>lua-penlight:luajit</package>
-  <package>lua-penlight:lua53</package>
-  <package>lua-penlight:lua54</package>
-  <package>lua-editorconfig-core-lua</package>
-  <package>lua-editorconfig-core-lua:luajit</package>
-  <package>lua-editorconfig-core-lua:lua53</package>
-  <package>lua-editorconfig-core-lua:lua54</package>
-</patchinfo>