- Enable (disabled by default) installation of headers needed
to build drivers.
- Use python macros from build config
* preamble
* 0001-fix-cpu-compatibility.patch
0002-SLE15-SP3-compatibility-patch-for-kni.patch
manually (bsc#1200620)
- rename
- Add patch to resolve build error reported in Staging:E project
* https://doc.dpdk.org/guides/rel_notes/release_19_11.html#new-features
- Changed to multibuild (bsc#1151455).
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
more details can be found in
- Remove CONFIG_RTE_LIBRTE_MBUF_OFFLOAD as cryptodev is not depending
- Added support for aarch64 compilation.
- Disabled aarch64 dpdk-examples package for the time being as it
- Removed unwanted files(bsc#984437).
- Applied all the fixes recommended by upstream for
- DPDK is most common vhost-user backend, Adding upstream patches to
- Added CONFIG_RTE_BUILD_COMBINE_LIBS flags to club all all *.so into
- Intial version 2.2.0(fate#319169)
OBS-URL: https://build.opensuse.org/request/show/1203005
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/dpdk?expand=0&rev=67
* preamble
* 0001-fix-cpu-compatibility.patch
0002-SLE15-SP3-compatibility-patch-for-kni.patch
manually (bsc#1200620)
- rename
- Add patch to resolve build error reported in Staging:E project
* https://doc.dpdk.org/guides/rel_notes/release_19_11.html#new-features
- Changed to multibuild (bsc#1151455).
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
more details can be found in
- Remove CONFIG_RTE_LIBRTE_MBUF_OFFLOAD as cryptodev is not depending
- Added support for aarch64 compilation.
- Disabled aarch64 dpdk-examples package for the time being as it
- Removed unwanted files(bsc#984437).
- Applied all the fixes recommended by upstream for
- DPDK is most common vhost-user backend, Adding upstream patches to
- Added CONFIG_RTE_BUILD_COMBINE_LIBS flags to club all all *.so into
- Intial version 2.2.0(fate#319169)
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=170
- Add patches to fix vulnerability where malicious guest can harm the host
using vhost crypto, this includes executing code in host (VM Escape),
reading host application memory space to guest and causing partially
denial of service in the host (bsc#1176590).
* 0001-vhost-crypto-fix-pool-allocation.patch
* 0002-vhost-crypto-fix-incorrect-descriptor-deduction.patch
* 0003-vhost-crypto-fix-missed-request-check-for-copy-mode.patch
* 0004-vhost-crypto-fix-incorrect-write-back-source.patch
* 0005-vhost-crypto-fix-data-length-check.patch
* 0006-vhost-crypto-fix-possible-TOCTOU-attack.patch
OBS-URL: https://build.opensuse.org/request/show/838479
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=121
- Update to v19.11.1. For a list of changes, check:
* https://doc.dpdk.org/guides/rel_notes/release_19_11.html#new-features
- Removed patches no longer applying to the code base:
* 0001-vhost-fix-possible-denial-of-service-on-SET_VRING_NU.patch
* 0002-vhost-fix-possible-denial-of-service-by-leaking-FDs.patch
* 0002-fix-cpu-compatibility.patch
- Rebased patches:
* 0001-fix-cpu-compatibility.patch
- Add patches to fix vulnerability where malicious guest/container can
cause resource leak resulting a Denial-of-Service, or memory corruption
and crash, or information leak in vhost-user backend application
(bsc#1171477, CVE-2020-10722, CVE-2020-10723, CVE-2020-10724,
CVE-2020-10725, CVE-2020-10726).
* 0001-vhost-check-log-mmap-offset-and-size-overflow.patch
* 0002-vhost-fix-vring-index-check.patch
* 0003-vhost-crypto-validate-keys-lengths.patch
* 0004-vhost-fix-translated-address-not-checked.patch
* 0005-vhost-fix-potential-memory-space-leak.patch
* 0006-vhost-fix-potential-fd-leak.patch
OBS-URL: https://build.opensuse.org/request/show/807340
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=115
- remove -Wno-error=array-bounds as its no longer needed
- Add -U_FORTIFY_SOURCE to fix gcc8 error:
"error: inlining failed in call to always_inline 'memcpy': target specific option mismatch"
- remove -Wno-error=array-bounds as its no longer needed
- Add -U_FORTIFY_SOURCE to fix gcc8 error:
"error: inlining failed in call to always_inline 'memcpy': target specific option mismatch"
OBS-URL: https://build.opensuse.org/request/show/683764
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=98
- Update to 18.11; some of the changes are:
* Added support for using externally allocated memory in DPDK.
* Added check for ensuring allocated memory is addressable by devices.
* Updated the C11 memory model version of the ring library.
* Added NXP CAAM JR PMD.
* Added support for GEN3 devices to Intel QAT driver.
* Added Distributed Software Eventdev PMD.
* Updated KNI kernel module, rte_kni library, and KNI sample application.
* Add a new sample application for vDPA.
* Updated mlx5 driver.
** Improved security of PMD to prevent the NIC from getting stuck when the application misbehaves.
** Reworked flow engine to supported e-switch flow rules (transfer attribute).
** Added support for header re-write(L2-L4), VXLAN encap/decap, count, match on TCP flags and multiple flow groups with e-switch flow rules.
** Added support for match on metadata, VXLAN and MPLS encap/decap with flow rules.
** Added support for RTE_ETH_DEV_CLOSE_REMOVE flag to provide better support for representors.
** Added support for meson build.
** Fixed build issue with PPC.
** Added support for BlueField VF.
** Added support for externally allocated static memory for DMA.
all the changes can be viwed in http://doc.dpdk.org/guides/rel_notes/release_18_11.html
[- 0001-enic-fix-Type-punning-and-strict-aliasing-warning.patch]
- Update to 18.11; some of the changes are:
* Added support for using externally allocated memory in DPDK.
* Added check for ensuring allocated memory is addressable by devices.
* Updated the C11 memory model version of the ring library.
* Added NXP CAAM JR PMD.
* Added support for GEN3 devices to Intel QAT driver.
* Added Distributed Software Eventdev PMD.
* Updated KNI kernel module, rte_kni library, and KNI sample application.
OBS-URL: https://build.opensuse.org/request/show/668322
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=93
- Fixed a problem with ABI compatibility; API/ABI compatibility is
guaranteed by DPDK upstream community across subsequent bug-fix
releases. However, the .spec file broke it by defining the wrong
version which included also the bug-fix release number.
- Fixed a problem with ABI compatibility; API/ABI compatibility is
guaranteed by DPDK upstream community across subsequent bug-fix
releases. However, the .spec file broke it by defining the wrong
version which included also the bug-fix release number.
OBS-URL: https://build.opensuse.org/request/show/637575
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=88
- Update to 18.0.2.2; some of the changes are:
* Added function to allow releasing internal EAL resources on exit
* Added igb, ixgbe and i40e ethernet driver to support RSS with flow API
* Updated i40e driver to support PPPoE/PPPoL2TP
* Added MAC loopback support for i40e
* Added support of run time determination of number of queues per i40e VF
* Updated mlx4/mlx5 driver
* Added NVGRE and UDP tunnels support in Solarflare network PMD
* Added AVF (Adaptive Virtual Function) net PMD
* Added feature supports for live migration from vhost-net to vhost-user
* Updated the AESNI-MB PMD
* Updated the DPAA_SEC crypto driver to support rte_security
* Added New eventdev Ordered Packet Distribution Library (OPDL) PMD
* Added GRO support for VxLAN-tunneled packets
- Removed 0002-dpdk-eal-ppc-rte_smp_mb.patch since incorporated
upstream
- Update to 18.0.2.2; some of the changes are:
* Added function to allow releasing internal EAL resources on exit
* Added igb, ixgbe and i40e ethernet driver to support RSS with flow API
* Updated i40e driver to support PPPoE/PPPoL2TP
* Added MAC loopback support for i40e
* Added support of run time determination of number of queues per i40e VF
* Updated mlx4/mlx5 driver
* Added NVGRE and UDP tunnels support in Solarflare network PMD
* Added AVF (Adaptive Virtual Function) net PMD
* Added feature supports for live migration from vhost-net to vhost-user
* Updated the AESNI-MB PMD
* Updated the DPAA_SEC crypto driver to support rte_security
* Added New eventdev Ordered Packet Distribution Library (OPDL) PMD
* Added GRO support for VxLAN-tunneled packets
- Removed 0002-dpdk-eal-ppc-rte_smp_mb.patch since incorporated
upstream
OBS-URL: https://build.opensuse.org/request/show/617394
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=82
- Update to 18.02.1
- Restrict untrusted guest to misuse virtio to corrupt
host application(ovs-dpdk) memory which can lead all VM to lose
connectivity(CVE-2018-1059,bsc#1089638).
Changes:
* Add deprecation notice for rte_vhost_gpa_to_vva()
* Patch vhost-net and vhost-scsi examples
* Fixes checkpatch warnings
* Take VIRTIO_RING_F_EVENT_IDX into account when ring size (Tiwei)
* Fix next chuncks translation access rights in Rx paths (Tiwei)
* vhost: fix indirect descriptors table translation size
* vhost: check all range is mapped when translating GPAs
* vhost: introduce safe API for GPA translation
* vhost: ensure all range is mapped when translating QVAs
* vhost: add support for non-contiguous indirect descs tables
* vhost: handle virtually non-contiguous buffers in Tx
* vhost: handle virtually non-contiguous buffers in Rx
* vhost: handle virtually non-contiguous buffers in Rx-mrg
* examples/vhost: move to safe GPA translation API
* examples/vhost_scsi: move to safe GPA translation API
* vhost/crypto: move to safe GPA translation API
* vhost: deprecate unsafe GPA translation API
- Update to 18.02.1
- Restrict untrusted guest to misuse virtio to corrupt
host application(ovs-dpdk) memory which can lead all VM to lose
connectivity(CVE-2018-1059,bsc#1089638).
Changes:
* Add deprecation notice for rte_vhost_gpa_to_vva()
* Patch vhost-net and vhost-scsi examples
OBS-URL: https://build.opensuse.org/request/show/600113
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=80
- Removed 0002-kni-fix-build-on-SLE12-SP3.patch since no longer referenced in .spec files
- Added 0002-dpdk-eal-ppc-rte_smp_mb.patch to fix an issue on ppc64le platforms with v18.02
- Updated to version 18.02; some of the changes include:
* Added function to allow releasing internal EAL resources on exit
* Added igb, ixgbe and i40e ethernet driver to support RSS with flow API
* Updated i40e driver to support PPPoE/PPPoL2TP
* Added MAC loopback support for i40e
* Added support of run time determination of number of queues per i40e VF
* Updated mlx5 driver
* Updated mlx4 driver
* Added NVGRE and UDP tunnels support in Solarflare network PMD
* Added AVF (Adaptive Virtual Function) net PMD
* Added feature supports for live migration from vhost-net to vhost-user
* Updated the AESNI-MB PMD
* Updated the DPAA_SEC crypto driver to support rte_security
* Added Wireless Base Band Device (bbdev) abstraction
* Added New eventdev Ordered Packet Distribution Library (OPDL) PMD
* Added new pipeline use case for dpdk-test-eventdev application
* Updated Eventdev sample application to support event devices based on capability
* Added Rawdev, a generic device support library
* Added new multi-process communication channel
* Added GRO support for VxLAN-tunneled packets
* Increased default Rx and Tx ring size in sample applications
* Added new DPDK build system using the tools “meson” and “ninja” [EXPERIMENTAL]
- Removed 0002-kni-fix-build-on-SLE12-SP3.patch since no longer referenced in .spec files
- Added 0002-dpdk-eal-ppc-rte_smp_mb.patch to fix an issue on ppc64le platforms with v18.02
- Updated to version 18.02; some of the changes include:
* Added function to allow releasing internal EAL resources on exit
* Added igb, ixgbe and i40e ethernet driver to support RSS with flow API
* Updated i40e driver to support PPPoE/PPPoL2TP
* Added MAC loopback support for i40e
* Added support of run time determination of number of queues per i40e VF
* Updated mlx5 driver
* Updated mlx4 driver
* Added NVGRE and UDP tunnels support in Solarflare network PMD
* Added AVF (Adaptive Virtual Function) net PMD
* Added feature supports for live migration from vhost-net to vhost-user
* Updated the AESNI-MB PMD
* Updated the DPAA_SEC crypto driver to support rte_security
* Added Wireless Base Band Device (bbdev) abstraction
* Added New eventdev Ordered Packet Distribution Library (OPDL) PMD
* Added new pipeline use case for dpdk-test-eventdev application
* Updated Eventdev sample application to support event devices based on capability
* Added Rawdev, a generic device support library
* Added new multi-process communication channel
* Added GRO support for VxLAN-tunneled packets
* Increased default Rx and Tx ring size in sample applications
* Added new DPDK build system using the tools “meson” and “ninja” [EXPERIMENTAL]
OBS-URL: https://build.opensuse.org/request/show/583318
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=77
- The vm_power example does not work for ppc64le since it uses the IXGBE PMD driver which is not available for that platform:
* Disable CONFIG_RTE_LIBRTE_POWER for the sample application;
* Disable CONFIG_RTE_LIBRTE_IXGBE_PMD for the actual PMD driver;
- The vm_power example does not work for ppc64le since it uses the IXGBE PMD driver which is not available for that platform:
* Disable CONFIG_RTE_LIBRTE_POWER for the sample application;
* Disable CONFIG_RTE_LIBRTE_IXGBE_PMD for the actual PMD driver;
OBS-URL: https://build.opensuse.org/request/show/580872
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=72
- Upgraded to latest stable release 17.11.1 (LTS): some of the fixes include:
* location changes of the GPL and LGPL licenses;
* net/mlx4:
- fix drop flow resources leak
* net/bnxt:
- double increment of idx during Tx ring alloc
- group info usage
- check for ether type
- size of Tx ring in HW
- number of pools for RSS
- return code in MAC address set
- link speed setting with autoneg off
* net/nfp:
- MTU settings
- jumbo settings
- CRC strip check behaviour
* net/sfc:
- multicast address list copy memory leak
- DMA memory leak after kvarg processing failure
- fix label name to be consistent
* net/i40e:
- VLAN offload setting issue
- FDIR input set conflict
- FDIR rule confiliction issue
- setting MAC address of VF
- flow director Rx resource defect
- warn when writing global registers
- multiple driver support
- interrupt conflict with multi-driver
- Rx interrupt
OBS-URL: https://build.opensuse.org/request/show/580648
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=71
- Upgraded to latest major 17.11; some of the fixes include:
* Extended port_id range from uint8_t to uint16_t
* Added a new driver for Marvell Armada 7k/8k devices
* Updated mlx4 driver
* Updated mlx5 driver
* Added SoftNIC PMD
* Added support for NXP DPAA Devices
* Updated support for Cavium OCTEONTX Device
* Added PF support to the Netronome NFP PMD
* Updated bnxt PMD
* Added bus agnostic functions to cryptodev for PMD initialization
* Updated QAT crypto PMD
* Updated the AESNI MB PMD
* Updated the OpenSSL PMD
* Added NXP DPAA SEC crypto PMD
* Add new benchmarking mode to dpdk-test-crypto-perf application
* Added IOMMU support to libvhost-user
* Added the Generic Segmentation Offload Library
* Added the Flow Classification Library
- Removed 0002-kni-fix-build-on-SLE12-SP3.patch since patch merged upstream and available in 17.11
- Upgraded to latest major 17.11; some of the fixes include:
* Extended port_id range from uint8_t to uint16_t
* Added a new driver for Marvell Armada 7k/8k devices
* Updated mlx4 driver
* Updated mlx5 driver
* Added SoftNIC PMD
* Added support for NXP DPAA Devices
* Updated support for Cavium OCTEONTX Device
* Added PF support to the Netronome NFP PMD
* Updated bnxt PMD
* Added bus agnostic functions to cryptodev for PMD initialization
* Updated QAT crypto PMD
* Updated the AESNI MB PMD
* Updated the OpenSSL PMD
* Added NXP DPAA SEC crypto PMD
* Add new benchmarking mode to dpdk-test-crypto-perf application
* Added IOMMU support to libvhost-user
* Added the Generic Segmentation Offload Library
* Added the Flow Classification Library
- Removed 0002-kni-fix-build-on-SLE12-SP3.patch since patch merged upstream and available in 17.11
OBS-URL: https://build.opensuse.org/request/show/562907
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=66
- Upgraded to latest stable 17.08.1; some of the fixes include:
* net/qede: disable per-VF Tx switching feature
* revert "net/virtio: flush Rx queues on start"
* various fixes for mlx5 PMD drivers
* various fixes for bnxt PMD drivers
* various fixes for i40e PMD drivers
* various fixes for crypto PMD drivers
* testpmd: fix for non-consecutive ports
* ethdev: fix ABI version
- Upgraded to latest stable 17.08.1; some of the fixes include:
* net/qede: disable per-VF Tx switching feature
* revert "net/virtio: flush Rx queues on start"
* various fixes for mlx5 PMD drivers
* various fixes for bnxt PMD drivers
* various fixes for i40e PMD drivers
* various fixes for crypto PMD drivers
* testpmd: fix for non-consecutive ports
* ethdev: fix ABI version
OBS-URL: https://build.opensuse.org/request/show/555936
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=62
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
Some of the new features are listed below:
* Increase minimum x86 ISA version to SSE4.2
* Added Fail-Safe PMD
* Added support for generic flow API (rte_flow) on igb NICs
* Added support for generic flow API (rte_flow) on enic
* Added support for Chelsio T6 family of adapters
* Added latency and performance improvements for cxgbe
* Updated mlx5 driver
* Added NXP DPAA2 Eventdev PMD
* Added dpdk-test-eventdev test application
* from 17.05:
* Added mbuf raw free API
* Added free Tx mbuf on demand API
* Added VFIO hotplug support
* Added PowerPC support for i40e and its vector PMD
* Added VF max bandwidth setting in i40e
* Added LiquidIO network PMD
* Added support for NXP DPAA2 Network PMD
* Added support for NXP DPAA2 - FSLMC bus
* Added support for the Wind River Systems AVP PMD
* Added vmxnet3 version 3 support
* Added MTU feature support to Virtio and Vhost
* Added event driven programming model library (rte_eventdev)
* Added Software Eventdev PMD
* Added Cavium OCTEONTX Eventdev PMD
* Added NXP DPAA2 SEC crypto PMD
* from 17.02:
* Added generic EAL API for I/O device memory read/write operations
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
* Added generic flow API (rte_flow)
* Added APIs for MACsec offload support to the ixgbe PMD
* Added Solarflare libefx-based network PMD.
* Added support for Mellanox ConnectX-5 adapters (mlx5)
* Added ARMv8 crypto PMD
* Added crypto performance test application
* more details can be found in
http://dpdk.org/doc/guides/rel_notes/release_17_08.htmlhttp://dpdk.org/doc/guides/rel_notes/release_17_05.htmlhttp://dpdk.org/doc/guides/rel_notes/release_17_02.html
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
- Split libs into a subpackage to provide multiple installable versions on same sytem
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
Some of the new features are listed below:
* Increase minimum x86 ISA version to SSE4.2
* Added Fail-Safe PMD
* Added support for generic flow API (rte_flow) on igb NICs
* Added support for generic flow API (rte_flow) on enic
* Added support for Chelsio T6 family of adapters
* Added latency and performance improvements for cxgbe
* Updated mlx5 driver
* Added NXP DPAA2 Eventdev PMD
* Added dpdk-test-eventdev test application
* from 17.05:
* Added mbuf raw free API
* Added free Tx mbuf on demand API
* Added VFIO hotplug support
* Added PowerPC support for i40e and its vector PMD
* Added VF max bandwidth setting in i40e
* Added LiquidIO network PMD
* Added support for NXP DPAA2 Network PMD
* Added support for NXP DPAA2 - FSLMC bus
* Added support for the Wind River Systems AVP PMD
* Added vmxnet3 version 3 support
* Added MTU feature support to Virtio and Vhost
* Added event driven programming model library (rte_eventdev)
* Added Software Eventdev PMD
* Added Cavium OCTEONTX Eventdev PMD
* Added NXP DPAA2 SEC crypto PMD
* from 17.02:
* Added generic EAL API for I/O device memory read/write operations
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
* Added generic flow API (rte_flow)
* Added APIs for MACsec offload support to the ixgbe PMD
* Added Solarflare libefx-based network PMD.
* Added support for Mellanox ConnectX-5 adapters (mlx5)
* Added ARMv8 crypto PMD
* Added crypto performance test application
* more details can be found in
http://dpdk.org/doc/guides/rel_notes/release_17_08.htmlhttp://dpdk.org/doc/guides/rel_notes/release_17_05.htmlhttp://dpdk.org/doc/guides/rel_notes/release_17_02.html
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
- Split libs into a subpackage to provide multiple installable versions on same sytem
OBS-URL: https://build.opensuse.org/request/show/522138
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/dpdk?expand=0&rev=19
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
Some of the new features are listed below:
* Increase minimum x86 ISA version to SSE4.2
* Added Fail-Safe PMD
* Added support for generic flow API (rte_flow) on igb NICs
* Added support for generic flow API (rte_flow) on enic
* Added support for Chelsio T6 family of adapters
* Added latency and performance improvements for cxgbe
* Updated mlx5 driver
* Added NXP DPAA2 Eventdev PMD
* Added dpdk-test-eventdev test application
* from 17.05:
* Added mbuf raw free API
* Added free Tx mbuf on demand API
* Added VFIO hotplug support
* Added PowerPC support for i40e and its vector PMD
* Added VF max bandwidth setting in i40e
* Added LiquidIO network PMD
* Added support for NXP DPAA2 Network PMD
* Added support for NXP DPAA2 - FSLMC bus
* Added support for the Wind River Systems AVP PMD
* Added vmxnet3 version 3 support
* Added MTU feature support to Virtio and Vhost
* Added event driven programming model library (rte_eventdev)
* Added Software Eventdev PMD
* Added Cavium OCTEONTX Eventdev PMD
* Added NXP DPAA2 SEC crypto PMD
* from 17.02:
* Added generic EAL API for I/O device memory read/write operations
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
OBS-URL: https://build.opensuse.org/request/show/520811
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=58
- Do not use obsolete pci_enable_msix for() kernel > 4.8
[+0006-kni-fix-ethtool-build-with-kernel-4.11.patch,
+0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
- Do not use obsolete pci_enable_msix for() kernel > 4.8
[+0006-kni-fix-ethtool-build-with-kernel-4.11.patch,
+0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
OBS-URL: https://build.opensuse.org/request/show/511193
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=54
- Upgrade to LTS release of 16.11 which contains fixes below(fate#321541):
- Add _constraints file to force build dpdk with sse3 enabled x86 machine(bsc#993462).
+0037-examples-ethtool-fix-build.patch,
+_constraints]
- Upgrade to LTS release of 16.11 which contains fixes below(fate#321541):
- Add _constraints file to force build dpdk with sse3 enabled x86 machine(bsc#993462).
+0037-examples-ethtool-fix-build.patch,
+_constraints]
OBS-URL: https://build.opensuse.org/request/show/479084
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=38
- Upgrade to LTS release of 16.11 which contains fixes below:
* app/test: fix symmetric session free in crypto perf tests
* app/testpmd: fix check for invalid ports
* app/testpmd: fix static build link ordering
* crypto/aesni_gcm: fix IV size in capabilities
* crypto/aesni_gcm: fix J0 padding bytes
* crypto/aesni_mb: fix incorrect crypto session
* crypto/openssl: fix extra bytes written at end of data
* crypto/openssl: fix indentation in guide
* crypto/qat: fix IV size in capabilities
* crypto/qat: fix to avoid buffer overwrite in OOP case
* cryptodev: fix crash on null dereference
* cryptodev: fix loop in device query
* devargs: reset driver name pointer on parsing failure
* drivers/crypto: fix different auth/cipher keys
* ethdev: check maximum number of queues for statistics
* ethdev: fix extended statistics name index
* ethdev: fix port data mismatched in multiple process model
* ethdev: fix port lookup if none
* ethdev: remove invalid function from version map
* examples/ethtool: fix driver information
* examples/ethtool: fix querying non-PCI devices
* examples/ip_pipeline: fix coremask limitation
* examples/ip_pipeline: fix parsing of pass-through pipeline
* examples/l2fwd-crypto: fix overflow
* examples/vhost: fix calculation of mbuf count
* examples/vhost: fix lcore initialization
* mempool: fix API documentation
* mempool: fix stack handler dequeue
* net/af_packet: fix fd use after free
OBS-URL: https://build.opensuse.org/request/show/476754
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=36
- Do not disable cryptodev as EXPREMENTAL tag has been removed.
- Remove CONFIG_RTE_LIBRTE_MBUF_OFFLOAD as cryptodev is not depending
on it anymore and its removed from the upstream.
- Do not disable cryptodev as EXPREMENTAL tag has been removed.
- Remove CONFIG_RTE_LIBRTE_MBUF_OFFLOAD as cryptodev is not depending
on it anymore and its removed from the upstream.
OBS-URL: https://build.opensuse.org/request/show/458688
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=33
* Added software parser for packet type.
* Improved offloads support in mbuf.
* Added vhost-user dequeue zero copy support.
* Added vhost-user indirect descriptors support.
* Added vhost PMD xstats.
* Added virtio NEON support for ARM.
* Updated the ixgbe base driver.
* Added APIs for VF management to the ixgbe PMD.
* Updated the enic driver.
* Added openssl PMD.
* Added support for new gcc -march option.
Detailed changes can be obtained from http://dpdk.org/doc/guides/rel_notes/release_16_11.html
* enic: Fixed several flow director issues.
* enic: Fixed inadvertent setting of L4 checksum ptype on ICMP packets.
* enic: Fixed high driver overhead when servicing Rx queues beyond the first.
* Added software parser for packet type.
* Improved offloads support in mbuf.
* Added vhost-user dequeue zero copy support.
* Added vhost-user indirect descriptors support.
* Added vhost PMD xstats.
* Added virtio NEON support for ARM.
* Updated the ixgbe base driver.
* Added APIs for VF management to the ixgbe PMD.
* Updated the enic driver.
* Added openssl PMD.
* Added support for new gcc -march option.
Detailed changes can be obtained from http://dpdk.org/doc/guides/rel_notes/release_16_11.html
* enic: Fixed several flow director issues.
* enic: Fixed inadvertent setting of L4 checksum ptype on ICMP packets.
* enic: Fixed high driver overhead when servicing Rx queues beyond the first.
OBS-URL: https://build.opensuse.org/request/show/455753
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=29
- Update to version 16.11(fate#321541). Some of the new features are listed below:
* Added software parser for packet type.
* Improved offloads support in mbuf.
* Added vhost-user dequeue zero copy support.
* Added vhost-user indirect descriptors support.
* Added vhost PMD xstats.
* Added virtio NEON support for ARM.
* Updated the ixgbe base driver.
* Added APIs for VF management to the ixgbe PMD.
* Updated the enic driver.
* Added openssl PMD.
* Added support for new gcc -march option.
Detailed changes can be obtained from http://dpdk.org/doc/guides/rel_notes/release_16_11.html
- Resolved fixes in the updated versions are :
enic: Fixed several flow director issues.
enic: Fixed inadvertent setting of L4 checksum ptype on ICMP packets.
enic: Fixed high driver overhead when servicing Rx queues beyond the first.
- Update to version 16.11(fate#321541). Some of the new features are listed below:
* Added software parser for packet type.
* Improved offloads support in mbuf.
* Added vhost-user dequeue zero copy support.
* Added vhost-user indirect descriptors support.
* Added vhost PMD xstats.
* Added virtio NEON support for ARM.
* Updated the ixgbe base driver.
* Added APIs for VF management to the ixgbe PMD.
* Updated the enic driver.
* Added openssl PMD.
* Added support for new gcc -march option.
OBS-URL: https://build.opensuse.org/request/show/454432
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=28
- Added dependency on gcc6 to build for aarch64 (armv8a) successfully
- Added support to build code for Thunderx platform:
* New patch (0001-rte-vars-fix-for-thunderx.patch) to fix DPDK cross-compile environment
- Introduced new dpdk-thunderx.spec file:
* Removed architectures not supporting Thunderx platform (e.g. x86)
* Added dependency on gcc v5.0 for armv8a-crc
- Update to version 16.07.2. Some of the fixes are listed below:
* ethdev: prevent duplicate event callback
* hash: fix bucket size usage
OBS-URL: https://build.opensuse.org/request/show/448521
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=21
- Update to version 16.07.2. Some of the fixes are listed below:
* ethdev: prevent duplicate event callback
* hash: fix bucket size usage
* hash: fix unlimited cuckoo path
* lpm: fix freeing memory
* lpm: fix freeing unused sub-table on rule delete
* mempool: fix leak if populate fails
* mempool: fix search of maximum contiguous pages
* pci: fix probing error if no driver found
* net/bnx2x: fix maximum PF queues
* net/bnxt: fix bit shift size
* net/bnxt: fix crash when closing
* net/enic: fix Rx queue index when not using Rx scatter
* net/enic: fix crash on MTU update or Rx queue reconfigure
* net/enic: fix crash with removed flow director filters
* net/enic: fix max packet length check
* net/enic: fix multi-queue Rx performance
* net/enic: revert truncated packets counter fix
* net/fm10k: fix VF Tx queue initialization
* net/i40e: fix Rx hang when disable LLDP
* net/ixgbe: fix VF registers
* net/thunderx: fix Tx checksum handling
* [The list of changes is rather long so please consult the following
resources for the complete list of new features, bugfixes and other
changes in this release:
- http://dpdk.org/doc/guides-16.07/rel_notes/release_16_07.html#id2]
OBS-URL: https://build.opensuse.org/request/show/442938
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=19
- Update to version 16.07.1. Some of the fixes are listed below:
* contigmem: zero all pages during mmap
* crypto/null: fix key size increment value
* hash: fix false zero signature key hit lookup
* mem: fix crash on hugepage mapping error
* mbuf: fix error handling on pool creation
* net/e1000: fix returned number of available Rx descriptors
* net/enic: fix freeing memory for descriptor ring
* net/i40e: fix dropping packets with ethertype 0x88A8
* net/i40e: fix mbuf leak during Rx queue release
* net/i40e: fix null pointer dereferences when using VMDq+RSS
* net/ixgbe/base: fix possible corruption of shadow RAM
* net/ixgbe: fix VF reset to apply to correct VF
* net/virtio_user: fix error management during init
* [The list of changes is rather long so please consult the following
resources for the complete list of new features, bugfixes and other
changes in this release:
- http://dpdk.org/doc/guides-16.07/rel_notes/release_16_07.html#fixes-in-16-07-01-stable-release]
OBS-URL: https://build.opensuse.org/request/show/441965
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=17
- Drop code for generating our own linker script.
* Commit 948fd64befc3 (" mk: replace the combined library with a
linker script") added upstream support for building and installing
a linker script so we drop our code from the spec file which
generated a much larger and possibly broken linker script resulting
to linking issues (boo#1002534)
- Update to version 16.07. Some of the new features are listed below:
* Removed the mempool cache memory if caching is not being used.
* Added mempool external cache for non-EAL thread.
* Changed the memory allocation scheme in the mempool library.
* Added a new driver for Broadcom NetXtreme-C devices.
* Added a new driver for ThunderX nicvf devices.
* Added mailbox interrupt support for ixgbe and igb VFs.
* Updated the ixgbe base driver.
* Updated the i40e base driver.
* Updated the enic driver.
* Updated the mlx5 driver.
* Added support for virtio on IBM POWER8.
* Added support for Virtio in containers.
* Added vhost-user client mode.
* Added NSH packet recognition in i40e.
* Added AES-CTR support to AESNI MB PMD.
* Added AES counter mode support for Intel QuickAssist devices.
* Added KASUMI SW PMD.
* Added multi-writer support for RTE Hash with Intel TSX.
* Improved IP Pipeline Application.
* Added keepalive enhancements.
* Added packet capture framework.
OBS-URL: https://build.opensuse.org/request/show/433598
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=15
- Add _constraints file to force build dpdk with sse3 enabled x86 machine.
- Enable compilation for ppc64le with the help of Rüdiger(ro@suse.de).
- Enable example package for aarch64 using Rüdiger(ro@suse.de) changes.
- Do not enable PMD_RING on ppc64le (missing rte_eth_from_rings).
- Disable examples that need LPM which is disabled on non-x86.
[+0036-examples-fix-build-dependencies.patch,
+0037-examples-ethtool-fix-build.patch]
OBS-URL: https://build.opensuse.org/request/show/417972
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=13
- Create DPDK packages for 32 bit x86(bsc#977639).
- Add upstream patch for the ixgbe driver
* 0007-ixgbe-fix-VLAN-filter-missing-brackets.patch: Fix VLAN
filtering logic by adding the missing brackets in the 'if' statement.
- DPDK is most common vhost-user backend, Adding upstream patches to
help qemu vm live migration with vhost-user (fate#320713).
[+ 0004-54f9e32-vhost-handle-dirty-pages-logging-request.patch
+ 0005-d293dac-vhost-claim-support-of-guest-announce.patch
+ 0006-d639996-vhost-enable-log_shmfd-protocol-feature.patch]
OBS-URL: https://build.opensuse.org/request/show/395036
OBS-URL: https://build.opensuse.org/package/show/network/dpdk?expand=0&rev=2
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
