- Update to 1.5.6:
New features:
* Add SBAT metadata to the fwupd EFI binary
* Add support for GD32VF103 as found in the Longan Nano
* Add support for RMI PS2 devices
* Add support for the System76 Keyboard
* Allow downloading firmware from IPFS
* Install the UX data into a single .tar.xz file
* Add a plugin to update PixArt RF devices
* Add new hardware to use the elantp and rts54hid plugins
* Allow specifying more than one VendorID for a device
* Detect the AMD TSME encryption state for HSI-4
* Detect the AMI PK test key is not installed for HSI-1
* Add Maple Ridge Thunderbolt firmware parsing support
* Add --no-remote-check to ignore checking for download remotes
* Allow creating FMAP and Synaptics firmware using builder.xml
Fixes:
* Add support for the Starlabs LabTop L4
* Allow using an external ESP again
* Ask the user to reboot when required if downgrading
* Be more paranoid when parsing ASCII buffers and devices
* Check if the fwupd BootXXXX entry exists on failure
* Clear the pending flag if restarting the system
* Do not allow flashing using flashrom if BLE is enabled
* Do not allow Lenovo hardware to install multiple capsules
* Do not parse the OptionROM image
* Do not show Unknown [***] for every client connection
* Fix dnload wBlockNum wraparound for ST devices
* Fix OOM when using large ArchiveSizeMax values
* Fix several crashes spotted by AddressSanitizer
* Fix several places where the Goodix MOC plugin could crash
* Include the PCR0 to the report metadata
* Report the lockdown status from UEFI and SuperIO plugins
* Show a console warning if the system clock is not set
* Fix flashing a fingerprint reader that is in use
* Fix several critical warnings when parsing invalid firmware
* Fix updating DFU devices that use DNLOAD_BUSY
* Ignore the legacy UEFI OVMF dummy GUID
* Make libfwupd more thread safe to fix a crash in gnome-software
* Never show unprintable chars from invalid firmware in the logs
* Allow using fwupdtool as non-root for firmware commands
* Do not trust the Block.HintSystem boolean for ESP filtering
* Fix a memory leak when parsing Synaptics firmware
* Fix a possible crash when reading the Goodix MOC USB request
* Fix crashes when parsing invalid FMAP, DMC, Solokey and Synaptics images
- Deprecate fwupd-bsc1179790-disable-hintsystem.patch
OBS-URL: https://build.opensuse.org/request/show/873415
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=97
- Update to version 1.5.3:
- Enable supported_build to clarify that this package is supported (bsc#1179790)
- Drop fwupd-platform-integrity.conf since upstream disables the platform integrity module by default now due to incompleteness.
- Address fwupd-refresh.service in %preun, %pre, %post, and %postun and provide a rc link for it
- Version "Obsoletes: dbxtool" and "Obsoletes: fwupdate"
OBS-URL: https://build.opensuse.org/request/show/854209
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=93
- Update to version 1.3.9:
* Release fwupd 1.3.9
* Always check for PLAIN when doing vercmp() operations
* improved fish shell completion
* vli: Set the MSP430 version format to pair
* added completion script for fish shell
* Always return AppStream markup for remote agreements
* Do not fail loading in /etc/machine-id is not available
* fu-engine: Fixup broken-ness from 0c0fada18fc9cb2a0efec351db67f0867bf045cd
* Use xb_builder_source_add_simple_adapter
* fu-tool: Correctly append the release to devices in `get-details`
* For the `get-details` command make sure to always show devices
* fu-engine: Copy the version and format from donor device in get-details
* fu-engine: Use unknown for version format by default on get-details
* Inihbit all power management actions using logind when updating
* fu-device-list: Check protocol before de-duping devices
* ata: Switch off the verbose logging by default
* Discard the reason upgrades aren't available (Fixes: #1678)
* Improve the description of `fwupdtpmevlog` for man page
* Move `fwupdtpmevlog` into `bindir`
* uefi: Move `fwupdate` into `bindir`
* Move `fwupdtool` and `fwupdagent` into `bindir`
* ci: use standalone script to generate build dependencies
* Move the daemons from /usr/lib/fwupd to /usr/libexec/fwupd
* Use the recently released flashrom v1.2
* uefi: Apply capsule update even with single valid capsule
* Fix a critical warning when installing some firmware
* ebitdo: Fix the endpoint address logged in the error message
* fu-util: fix a logic error in report uploading introduced in e076d48afb74d1447936d353f12781755f13b047
* uefi: Find the correct lds and crt name when specifying -Defi_ldsdir
OBS-URL: https://build.opensuse.org/request/show/784891
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=67
- Update to version 1.3.1:
* Allow disabling all plugins
* trivial: Specify the tpm2-tss-devel version in the example spec file
* Move to CI Fedora 30
* modem-manager: Fix two build warnings on Fedora 30
* synapticsmst: Add another name quirk for the ThinkPad USB-C Dock
* Re-introduce GUID support to fwupdmgr and fwupdtool
* uefi-recovery: Add a plugin to add a fake ESRT entry for device recovery
* Add a DMI quirk for the Minnowboard Turbot
* trivial: Make it easy to disable or enable libflashrom for distros
* trivial: Don't use Recommends for RHEL 7
* unifying: fix timeout metadata
* ci: arch: minor improvements
* unifying: fix timeout
* Allow disabling SSL strict mode for broken corporate proxies
* trivial: Allow ignoring the daemon version check by using --force
* Try to only show DMI product name once
* trivial: fu-util-common: Show unknown devices as interesting devices
* dell: Use TSS to query and build TPM vendor strings for GUIDs
* trivial: dell: show reasons for lack of updates in `UpdateError`
* fu-util-common: strip all trailing whitespace in XML description
* trivial: fu-common: match all whitespace not just ' ' in `fu_common_strstrip`
* fu-util: show release output in get-details again
* unifying: use fu_firmware_strparse_uint16 to read be 16bit values
* unifying: fix incomplete hex file parsing
* fu-util/fu-tool: Print devices, remotes, releases using a tree
* Add aliases for `get-upgrades` and `upgrade`
* trivial: UEFI skip self tests if library fails to initialize
* libfwupd: Add a new private function `fwupd_remote_set_remotes_dir`
* trivial: add libtss2-dev into debian/control (Closes: #1324)
* trivial: Fix up the GtkDoc Since lines for API only available in 1.3.x
* trivial: Post branch version bump
* thunderbolt: Add support for kernel safety checks (Fixes: #1312)
* Include the kernel release as a runtime version
* trivial: fu-util: Drop GUID support from get-devices
* synapticsmst: Partially rewrite the plugin (Fixes#1105)
* Remove replug flag after the device comes back from reboot
* trivial: Fix running the tests on devices with the TPM in v1.2 mode
* trivial: fu-util-common: more cleanup related to topology
* trivial: fu-util: cleanup fwupdmgr get-details output
* trivial: Don't use topology printing in --verbose mode
* Make get-devices and get-topology aliases for one another
* trivial: Adjust daemon device sorting
* Make get-topology more useful by showing all information
* trivial: Fix fu_common_string_append_kv() to align properly with idx > 0
* trivial: dell-dock: correct an error preventing write_size from being set
* trivial: Do not warn about deprecated declarations
* trivial: Update BRs for the example Fedora package
* uefi: add test for TPM 2.0 PCR read function
* uefi: use tpm2-tss library to read PCR values
* fu-common: Use environment variables for systemd managed directories
* Use more systemd directives for directories
* trivial: fu-util: fix debug output for devices
* Allow turning off the timestamp prefix for debugging
* Add a ->udev_device_changed plugin vfunc
* Add fu_device_rescan() and a FuDevice->rescan() vfunc
* Remove the duplicate files in meson.build
* Hash the source files when generating the daemon hash
* Split up source files in the build script
* uefi: add support for tpm2-tools 4.X
* trivial: plugins: clarify stance on afuefi.efi
* trivial: plugins/: Update README
* trivial: disable gtkdoc by default
* trivial: update references of hughsie/fwupd to fwupd/fwupd
* Publish docs to fwupd.github.io using CircelCI
* Add support to integrate into the motd (Fixes: #1270)
* Simplify get-devices output to not show un-useful fields
* fu-engine/fu-config: Reload metadata store when configuration changes
* trivial: If no devices support updates, show messaging (Closes: #1295)
* trivial: uefi: set vendor name for system firwmare from DMI data
* unifying: update Solaar url
* thunderbolt: Fix logic to work properly with ICL thunderbolt controller
* Add fu_udev_device_get_device_file() helper
* trivial: Fix regression when using fu_device_incorporate()
* trivial: Fix a potential crash when using FuPlugin in the self tests
* synapticsmst: Make FuSynapticsmstConnection an actual GObject
* synapticsmst: Use the same style as other plugins
* trivial: Add some helper functions for GByteArray
* Do not use FuDevice metadata for the physical and logical IDs
* Use fu_common_string_append_kv() in subclassed device
* synapticsmst: Use G_DECLARE_FINAL_TYPE to simplify the object
* synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock
* trivial: remove unnecessary CUSTOMERID_DELL define
* synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock
* synapticsmst: Display the board ID in non-hex form in the error message
* synapticsmst: Use a more suitable icon for the device
* trivial: Remove unused variable
* Never use memcpy() in a possibly unsafe way
* Add a ->to_string() vfunc to FuFirmware
* Use FuFirmware as a container for firmware images
* Allow filtering devices when using the command line tools
* Be more accepting when trying to recover a failed database migration
* trivial: Add translation for X-ThunderboltController
* trivial: fixup standalone installer
* modem-manager: add counterpart GUID for the DW5821e
* solokey: Release the interface and rebind the kernel driver on close
* fu-tool: Port ability to update a single device from fwupdmgr
* uefi: Actually write the new device path if different than before
* Allow setting custom flags when using fwupdate
* trivial: Do not show a critical warning if no firmware is specified
* trivial: Fix overzealous search-replace action in user string
* Verify we don't break the ABI
* Fix a crash when stopping the fwupd service
* Relax the certificate time checks in the self tests for the legacy certificate
* trivial: add cache directory into systemd unit rw paths
* Never show AppStream markup on the console
* Do not segfault when trying to quit the downgrade selection
* trivial: Update icons for Thunderbolt and MST devices
* Add support for the SoloKey Secure
* trivial: Allow a device to *clear* a firmware version
* trivial: debian: For signed package fill out Built-Using (Closes: #932757)
* Allow specifying <firmware>GUID</firmware> to check any version exists
* trivial: post release version bump
* Release fwupd 1.2.10
* Disable the flashrom plugin by default
* trivial: thunderbolt: catch failure setting up device
* dell-esrt: Improve the experience for the plugin (Closes: #1245)
* fu-util: When unlocking prompt for reboot if applicable
* remove those PIDs with Bluetooth interface, Wacom updater doesn't support updating from Bluetooth interface
* flashrom: Only show DEBUG and DEBUG2 output if using --plugin-verbose=flashrom
* flashrom: Only call flashrom_programmer_init() on whitelisted boards
* flashrom: Fix no version format set
* fu-util: Show devices with an UpdateError in get-devices output
* trivial: uefi: use UEFI-dummy for device ID instead of just uefi
* trivial: fix error handling for non UEFI case (#1220)
* Add a specific error code for the low battery case
* Fix Fedora docker build missing directory: dist
* uefi: Determine whether running in legacy mode or not (Fixes: #1220)
* trivial: ci: debian: Only turn on flashrom when running CI
* trivial: Fix typos in error messages
* Allow client code to construct objects from GVariant blobs
* Export functionality to build an array of objects
* flashrom: Use libflashrom
* trivial: Fix the version script to pick up boxed types
* trivial: Correctly order the map entries according to vercmp rules
* trivial: Fix pylint issue in the version script
* Add meson target to fix translations
* Add support for 8bitdo USB Retro Receiver
* Use the newer features of GRWLock rather than reinventing it
* Revert "Allow SuperIO updates to be done live"
* uefi: Try to find a duplicate using the loadopt name
* uefi: Provide a quirk to disable the use of the UX capsule
* trivial: uefi: use the path for efibootmgr that was detected
* synaptics-prometheus: Fix installing CONFIG firmware updates
* synaptics-prometheus: Set the install duration from a quirk
* synaptics-prometheus: Don't emit critial warning when updating config firmware
* synaptics-prometheus: Fix missing field in the IOTA reply struct
* Create SECURITY.md
* redfish: Never set NULL device name
* modem-manager: Never set NULL device name
* ata: Never set NULL device name
* trivial: Add some parameter guards to FuDevice
* trivial: snap: make polkit directories if they don't exist (Fixes: #1205)
* trivial: fu-main: clarify missing PK file error
* synapticsmst: fix GUID generation (Closes: #1207)
* Lite Mk II flag for use-shim-unique
* trivial: circleci: try to fix automatic snap deployment
* Allow SuperIO updates to be done live
* fu-util-common: Support empty proxy strings (Fixes: #1199)
* trivial: uefi: clarify error message
* trivial: Fix non-systemd build
* trivial: Sync example spec file with downstream
* trivial: post release version bump
- Drop fwupd-bsc1143905-hash-the-source-files.patch: Applied upstream.
- Add pkgconfig(tss2-esys) BuildRequires: New dependency.
- Add gtk-doc BuildRequires and pass gtkdoc=true to meson, build
api docs even when using source service.
OBS-URL: https://build.opensuse.org/request/show/732869
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=59
- Update to version 1.2.9:
* Release fwupd 1.2.9
* trivial: Add two new translatable strings for new category types
* Check if the system is offline during install, rather than at startup
* Prompt the user to shutdown if requried when installing by ID
* Use the correct file extension for the offline updates cache
* trivial: Allow using --force to use the wrong daemon version
* trivial: Display the correct expected command
* standalone-installer: Be smarter about existing installed fwupd
* Add a plugin to update Synaptics Prometheus fingerprint readers
* trivial: standalone-installer: rename uninstall argument to cleanup
* fu-util: Check the daemon version is at least the client version
* fu-util: Check that daemon is started by expected unit
* fu-util-common: when stopping a daemon, check for snap too
* Allow using --force to trigger a duplicate offline update
* trivial: Allow using FuUsbDevice without a GUsbDevice
* trivial: Copy the icons if unset for the device child
* trivial: Copy the physical ID if unset for the device child
* trivial: Ensure the parent ID is up to date if the device ID changes
* trivial: Fix typo when setting the parent ID
* trivial: Disable the flatpak CI build
* Allow handling FORCE for devices that subclass FuDevice
* uefi: Fix a libasan failure when reading a UEFI variable
* trivial: Fix a memory leak found using libasan
* trivial: Fix an libasan failure in the dell plugin
* trivial: Fix some dead code spotted by coverity
* trivial: Fix a typo spotted by coverity
* trivial: Fix a missing config.h include in a new source file
* Dynamically read path to use for /system-update
* Display the remote warning on the console in an easy-to-read way
OBS-URL: https://build.opensuse.org/request/show/711904
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=53
- Add pesign-obs-integration to BuildRequires and add fwupd*.efi to
BRP_PESIGN_FILES to get it signed
- Add LC_IMAGES and use efivar only if %{with efi_fw_update}
+ Also update the version requirement of efivar
- Disable Redfish and NVME plugins if %{without efi_fw_update}
since those two plugins require efivar
- Remove fwup from BuildRequires since fwupdate is already merged
into fwupd.
OBS-URL: https://build.opensuse.org/request/show/657350
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=41
- cleanup of the last 1.1.1 changelog (I accidentally left the committer names in the changes which is not really needed)
- Update to version 1.1.2:
+ New Features:
- Add a new device flag "ignore-validation" that will override checks
- Add a new plugin to enumerate EC firmware
- Add a new plugin to update NVMe hardware
- Add a plugin for updating using the flashrom command line tool
- Allow the device list to take care of waiting for the device replug
- Allow updating just one specific device from the command line
- Allow upgrades using a self-signed fwupd.efi binary
- Download firmware if the user specifies a URI
- Include serial number in daemon device output when trusted
- Notify all plugins of device removals through a new vfunc
- Use boltd force power API if available
+ Bugfixes:
- Add an install hook for classic snap
- Allow forcing installation even if no AC power is applied
- Allow using --force to ignore version_lowest
- Always use the same HardwareIDs as Windows
- Check the device state before assuming a fake DFU runtime
- Copy over parent GUIDs from other plugin donors
- Detect location of python3 interpreter
- Do not add udev devices after a small delay
- Don't fail to run if compiled without GPG/PKCS7
- Fix a segfault in fwupdtool caused by cleanup of USB plugins
- Implement the systemd recommendations for offline updates
- Improve performance when reading keys from the quirk database
- Remove children of devices when the parent is removed
- Rewrite synapticsmst to use modern error handling
- Rewrite the unifying plugin to use the new daemon-provided functionality
- Show a time estimate on the progressbar after an update has started
OBS-URL: https://build.opensuse.org/request/show/635498
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=33
- Update to version 1.1.1:
+ New Features:
- Add support for the Synaptics Panamera hardware (Mario Limonciello)
- Add validation for Alpine and Titan Ridge (Andrei Emeltchenko, Mika Westerberg)
- Improve the Redfish plugin to actually work with real hardware (Gary Lin)
+ Bugfixes:
- Allow different plugins to add the same device (Richard Hughes)
- Allow flashing unifying devices in recovery mode (Richard Hughes)
- Allow running synapticsmst on non-Dell hardware (Mario Limonciello)
- Check the ESP for sanity at at startup (Richard Hughes, Mario Limonciello)
- Do not hold hidraw devices open forever (Richard Hughes)
- Don't override _FORTIFY_SOURCE when building the EFI binary (Richard Hughes)
- Don't show passwords in fwupdmgr (Richard Hughes, Mario Limonciello)
- Fix a potential segfault in smbios data parsing (Mario Limonciello)
- Fix encoding the GUID into the capsule EFI variable (Mario Limonciello)
- Fix various bugs when reading the thunderbolt version number (Mika Westerberg)
- Reboot synapticsmst devices at the end of flash cycle (Mario Limonciello)
- Show status messages when the daemon is initializing (Mario Limonciello)
- Show the correct title when updating devices (Richard Hughes, Mario Limonciello)
- Show the reasons that plugins are not run on the CLI (Mario Limonciello)
- Use localedir in po/make-images (Jan Tojnar)
OBS-URL: https://build.opensuse.org/request/show/634392
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=32
- Update to version 1.0.6:
+ New Features:
- Add bash completion for fwupdmgr.
- Add support for newest Thunderbolt chips.
- Allow all functions that take device arguments to be
prompted.
- Allow devices to use the runtime version when in bootloader
mode.
- Allow overriding ESP mount point via conf file.
- Delete any old fwupdate capsules and efivars when launching
fwupd.
- Generate Vala bindings.
+ Bugfixes:
- Allow ctrl-d out of the prompt for devices.
- Allow to create package out of provided binary.
- Correct handling of unknown Thunderbolt devices.
- Correctly detect new remotes that are manually copied.
- Fix a crash related to when passing device to downgrade in
CLI.
- Fix running the self tests when no fwupd is installed.
- Fix Unifying signature writing and parsing for Texas
bootloader.
- Only send success and failure reports to the server.
- Use a CNAME to redirect to the correct CDN for metadata.
- Use a longer timeout when powering back the Thunderbolt
device.
OBS-URL: https://build.opensuse.org/request/show/590770
OBS-URL: https://build.opensuse.org/package/show/Base:System/fwupd?expand=0&rev=24
