SHA256
1
0
forked from pool/grub2

Accepting request 703735 from home:rwill:branches:Base:System

- Check/refresh zipl-kernel before hibernate on s390x.  (bsc#940457)
  (Getting rid of hardcoded 'vmlinuz', which failed on PPC as well.)
- Try to refresh zipl-kernel on failed kexec.  (bsc#1127293)
- Fully support "previous" zipl-kernel,
  with 'mem=1G' being available on dedicated entries.  (bsc#928131)

OBS-URL: https://build.opensuse.org/request/show/703735
OBS-URL: https://build.opensuse.org/package/show/Base:System/grub2?expand=0&rev=333
This commit is contained in:
Michael Chang 2019-05-20 06:03:38 +00:00 committed by Git OBS Bridge
parent 591f180452
commit df62b2deb2
6 changed files with 464 additions and 94 deletions

View File

@ -47,27 +47,30 @@ V16:
* dracut-grub2.sh: force read-only '/usr' for kexec. [bsc#932951]
V17:
* grub2-zipl-setup: remove arybase dependency by not referencing $[. [bsc#1055280]
V18:
* dracut-zipl-refresh.sh.in: initial submission. [bsc#1127293]
* dracut-grub2.sh: try to call zipl-refresh on failed kexec and drop
to an emergency shell otherwise
---
Makefile.util.def | 39 +++
configure.ac | 9
grub-core/Makefile.core.def | 7
grub-core/osdep/basic/no_platform.c | 7
grub-core/osdep/unix/platform.c | 11
grub-core/osdep/windows/platform.c | 6
include/grub/util/install.h | 4
util/grub-install-common.c | 1
util/grub-install.c | 43 +++
util/s390x/dracut-grub2.sh.in | 110 +++++++++
util/s390x/dracut-module-setup.sh.in | 19 +
util/s390x/zipl2grub.conf.in | 26 ++
util/s390x/zipl2grub.pl.in | 424 +++++++++++++++++++++++++++++++++++
13 files changed, 702 insertions(+), 4 deletions(-)
Makefile.util.def | 46 +++
configure.ac | 9
grub-core/Makefile.core.def | 7
grub-core/osdep/basic/no_platform.c | 7
grub-core/osdep/unix/platform.c | 11
grub-core/osdep/windows/platform.c | 6
include/grub/util/install.h | 4
util/grub-install-common.c | 1
util/grub-install.c | 43 +++
util/s390x/dracut-grub2.sh.in | 126 +++++++++
util/s390x/dracut-module-setup.sh.in | 19 +
util/s390x/dracut-zipl-refresh.sh.in | 183 ++++++++++++++
util/s390x/zipl2grub.conf.in | 26 ++
util/s390x/zipl2grub.pl.in | 423 +++++++++++++++++++++++++++++++++
14 files changed, 908 insertions(+), 3 deletions(-)
Index: grub-2.02/Makefile.util.def
===================================================================
--- grub-2.02.orig/Makefile.util.def
+++ grub-2.02/Makefile.util.def
--- a/Makefile.util.def
+++ b/Makefile.util.def
@@ -352,6 +352,7 @@ program = {
ldadd = grub-core/gnulib/libgnu.a;
ldadd = '$(LIBINTL) $(LIBDEVMAPPER) $(LIBUTIL) $(LIBZFS) $(LIBNVPAIR) $(LIBGEOM)';
@ -108,7 +111,7 @@ Index: grub-2.02/Makefile.util.def
common = grub-core/kern/emu/argp_common.c;
common = grub-core/osdep/init.c;
@@ -697,6 +702,38 @@ script = {
@@ -697,6 +702,46 @@ script = {
};
script = {
@ -143,11 +146,19 @@ Index: grub-2.02/Makefile.util.def
+ installdir = platform;
+};
+
+script = {
+ name = dracut-zipl-refresh;
+ common = util/s390x/dracut-zipl-refresh.sh.in;
+ enable = emu;
+ emu_condition = COND_s390x;
+ installdir = platform;
+};
+
+script = {
name = grub-mkconfig_lib;
common = util/grub-mkconfig_lib.in;
installdir = noinst;
@@ -1308,6 +1345,7 @@ program = {
@@ -1308,6 +1353,7 @@ program = {
ldadd = libgrubkern.a;
ldadd = grub-core/gnulib/libgnu.a;
ldadd = '$(LIBINTL) $(LIBDEVMAPPER) $(LIBZFS) $(LIBNVPAIR) $(LIBGEOM)';
@ -155,10 +166,8 @@ Index: grub-2.02/Makefile.util.def
};
program = {
Index: grub-2.02/configure.ac
===================================================================
--- grub-2.02.orig/configure.ac
+++ grub-2.02/configure.ac
--- a/configure.ac
+++ b/configure.ac
@@ -181,9 +181,9 @@ if test x$platform != xemu ; then
esac
fi
@ -182,10 +191,8 @@ Index: grub-2.02/configure.ac
AM_CONDITIONAL([COND_HOST_HURD], [test x$host_kernel = xhurd])
AM_CONDITIONAL([COND_HOST_LINUX], [test x$host_kernel = xlinux])
Index: grub-2.02/grub-core/Makefile.core.def
===================================================================
--- grub-2.02.orig/grub-core/Makefile.core.def
+++ grub-2.02/grub-core/Makefile.core.def
--- a/grub-core/Makefile.core.def
+++ b/grub-core/Makefile.core.def
@@ -1057,6 +1057,7 @@ module = {
module = {
name = videotest;
@ -240,10 +247,8 @@ Index: grub-2.02/grub-core/Makefile.core.def
};
module = {
Index: grub-2.02/grub-core/osdep/basic/no_platform.c
===================================================================
--- grub-2.02.orig/grub-core/osdep/basic/no_platform.c
+++ grub-2.02/grub-core/osdep/basic/no_platform.c
--- a/grub-core/osdep/basic/no_platform.c
+++ b/grub-core/osdep/basic/no_platform.c
@@ -44,3 +44,10 @@ grub_install_sgi_setup (const char *inst
{
grub_util_error ("%s", _("no SGI routines are available for your platform"));
@ -255,10 +260,8 @@ Index: grub-2.02/grub-core/osdep/basic/no_platform.c
+ grub_util_error ("%s", _("no zIPL routines are available for your platform"));
+}
+
Index: grub-2.02/grub-core/osdep/unix/platform.c
===================================================================
--- grub-2.02.orig/grub-core/osdep/unix/platform.c
+++ grub-2.02/grub-core/osdep/unix/platform.c
--- a/grub-core/osdep/unix/platform.c
+++ b/grub-core/osdep/unix/platform.c
@@ -233,3 +233,14 @@ grub_install_sgi_setup (const char *inst
imgfile, destname, NULL });
grub_util_warn ("%s", _("You will have to set `SystemPartition' and `OSLoader' manually."));
@ -274,10 +277,8 @@ Index: grub-2.02/grub-core/osdep/unix/platform.c
+ "-z", dest, NULL }))
+ grub_util_error (_("`%s' failed.\n"), PACKAGE"-zipl-setup");
+}
Index: grub-2.02/grub-core/osdep/windows/platform.c
===================================================================
--- grub-2.02.orig/grub-core/osdep/windows/platform.c
+++ grub-2.02/grub-core/osdep/windows/platform.c
--- a/grub-core/osdep/windows/platform.c
+++ b/grub-core/osdep/windows/platform.c
@@ -422,3 +422,9 @@ grub_install_sgi_setup (const char *inst
{
grub_util_error ("%s", _("no SGI routines are available for your platform"));
@ -288,10 +289,8 @@ Index: grub-2.02/grub-core/osdep/windows/platform.c
+{
+ grub_util_error ("%s", _("no zIPL routines are available for your platform"));
+}
Index: grub-2.02/include/grub/util/install.h
===================================================================
--- grub-2.02.orig/include/grub/util/install.h
+++ grub-2.02/include/grub/util/install.h
--- a/include/grub/util/install.h
+++ b/include/grub/util/install.h
@@ -99,6 +99,7 @@ enum grub_install_plat
GRUB_INSTALL_PLATFORM_I386_XEN,
GRUB_INSTALL_PLATFORM_X86_64_XEN,
@ -310,10 +309,8 @@ Index: grub-2.02/include/grub/util/install.h
int
grub_install_compress_gzip (const char *src, const char *dest);
int
Index: grub-2.02/util/grub-install-common.c
===================================================================
--- grub-2.02.orig/util/grub-install-common.c
+++ grub-2.02/util/grub-install-common.c
--- a/util/grub-install-common.c
+++ b/util/grub-install-common.c
@@ -666,6 +666,7 @@ static struct
[GRUB_INSTALL_PLATFORM_ARM_EFI] = { "arm", "efi" },
[GRUB_INSTALL_PLATFORM_ARM64_EFI] = { "arm64", "efi" },
@ -322,10 +319,8 @@ Index: grub-2.02/util/grub-install-common.c
};
char *
Index: grub-2.02/util/grub-install.c
===================================================================
--- grub-2.02.orig/util/grub-install.c
+++ grub-2.02/util/grub-install.c
--- a/util/grub-install.c
+++ b/util/grub-install.c
@@ -66,6 +66,7 @@ static int force_file_id = 0;
static char *disk_module = NULL;
static char *efidir = NULL;
@ -467,11 +462,9 @@ Index: grub-2.02/util/grub-install.c
case GRUB_INSTALL_PLATFORM_MIPSEL_LOONGSON:
case GRUB_INSTALL_PLATFORM_MIPSEL_QEMU_MIPS:
case GRUB_INSTALL_PLATFORM_MIPS_QEMU_MIPS:
Index: grub-2.02/util/s390x/dracut-grub2.sh.in
===================================================================
--- /dev/null
+++ grub-2.02/util/s390x/dracut-grub2.sh.in
@@ -0,0 +1,110 @@
+++ b/util/s390x/dracut-grub2.sh.in
@@ -0,0 +1,126 @@
+#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
@ -566,8 +559,23 @@ Index: grub-2.02/util/s390x/dracut-grub2.sh.in
+
+ debug "Trying grub2-emu (ro=$grub2rofs, TERM=$TERM, ctty=$_ctty)..."
+ setsid $CTTY -- chroot /sysroot $bindir/grub2-emu -X -X 0<>$_ctty 1>&0 2>&0
+ if [ -e /grub2force ] && [ $(cat /sys/kernel/kexec_loaded) = 1 ]; then
+ systemctl kexec
+
+ if [ -x /sysroot/usr/share/grub2/zipl-refresh ]; then
+ setsid $CTTY -- /sysroot/usr/share/grub2/zipl-refresh 0<>$_ctty 1>&0 2>&0
+ if [ $? != 0 ]; then
+ warn "Not continuing"
+ emergency_shell -n grub2-emu-zipl-refresh
+ else
+ echo "+ reboot" >& $_ctty
+ sleep 3
+ reboot
+ fi
+ else
+ echo "
+ Attention: 'grub2' failed to start the target kernel and 'zipl-refresh'
+ is not available. This should never happen. Please contact support." >& $_ctty
+ warn "Not continuing"
+ emergency_shell -n grub2-emu-kexec
+ fi
+
+ $grub2snap || umount /sysroot/.snapshots
@ -578,14 +586,13 @@ Index: grub-2.02/util/s390x/dracut-grub2.sh.in
+ $grub2roufs || mount -o remount,rw /sysroot/usr
+ $grub2rofs || mount -o remount,rw /sysroot
+ else
+ info "No $bindir/grub2-emu in /sysroot--trying to proceed without kexec..."
+ warn "No $bindir/grub2-emu in /sysroot--dropping to emergency shell..."
+ emergency_shell -n no-grub2-emu
+ fi
+fi
+
Index: grub-2.02/util/s390x/dracut-module-setup.sh.in
===================================================================
--- /dev/null
+++ grub-2.02/util/s390x/dracut-module-setup.sh.in
+++ b/util/s390x/dracut-module-setup.sh.in
@@ -0,0 +1,19 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
@ -606,10 +613,8 @@ Index: grub-2.02/util/s390x/dracut-module-setup.sh.in
+ #inst_multiple grub2-emu kexec
+}
+
Index: grub-2.02/util/s390x/zipl2grub.conf.in
===================================================================
--- /dev/null
+++ grub-2.02/util/s390x/zipl2grub.conf.in
+++ b/util/s390x/zipl2grub.conf.in
@@ -0,0 +1,26 @@
+## This is the template for '@zipldir@/config' and is subject to
+## rpm's %config file handling in case of grub2-s390x-emu package update.
@ -637,10 +642,8 @@ Index: grub-2.02/util/s390x/zipl2grub.conf.in
+ 1 = grub2
+ 2 = skip-grub2
+
Index: grub-2.02/util/s390x/zipl2grub.pl.in
===================================================================
--- /dev/null
+++ grub-2.02/util/s390x/zipl2grub.pl.in
+++ b/util/s390x/zipl2grub.pl.in
@@ -0,0 +1,423 @@
+#!/usr/bin/perl
+use strict;
@ -1065,3 +1068,189 @@ Index: grub-2.02/util/s390x/zipl2grub.pl.in
+System( @C);
+exit( $miss);
+
--- /dev/null
+++ b/util/s390x/dracut-zipl-refresh.sh.in
@@ -0,0 +1,183 @@
+#!/bin/bash
+# ex: ts=8 sw=4 sts=4 et filetype=sh syntax=off
+
+debug=false
+TIMEOUT=60
+[ -n "$SYSROOT" ] ||
+SYSROOT=/sysroot
+[ -d $SYSROOT/boot ] || SYSROOT=
+
+sync() { $SYSROOT/usr/bin/sync "$@"; }
+readlink() { $SYSROOT/usr/bin/readlink "$@"; }
+newline() { echo ""; }
+verbose() {
+ local a
+ local m
+ [ -n "$*" ] || return 0
+ m="+"
+ for a in "$@"; do
+ case "$a" in
+ (*" "*|*" "*|"") m="$m '$a'";;
+ (*) m="$m $a";;
+ esac
+ done
+ echo "$m"
+ [ -n "$SYSROOT" -o "$1" = "chroot" ] || return 0
+ "$@"
+}
+
+SYSK="$(readlink $SYSROOT/boot/image)"
+SYSK="${SYSK#image-}"
+ZIPK="$(readlink $SYSROOT/boot/zipl/image)"
+ZIPK="${ZIPK#image-}"
+PRVK="$(readlink $SYSROOT/boot/zipl/image.prev 2> /dev/null)"
+PRVK="${PRVK#image-}"
+RUNK="$(uname -r)"
+# if /boot/zipl is not accessible ZIPK will be empty, assume running kernel
+[ -n "$ZIPK" ] || ZIPK="$RUNK"
+
+[ -n "$SYSROOT" ] || {
+ echo "$0 is not intended for interactive use!"
+ $debug ||
+ exit 0
+ ## test:
+ TIMEOUT=6
+ RUNK=110; ZIPK=110; PRVK=101; SYSK=194
+ ##RUNK=$PRVK; ZIPK=$SYSK # previous booted, newest is default
+ ##t=$ZIPK; ZIPK=$PRVK; PRVK=$t; SYSK=$PRVK # unknown booted
+ ##ZIPK=$SYSK; PRVK="" # no update
+ ##ZIPK=$SYSK # try previous
+ echo "R=$RUNK S=$SYSK Z=$ZIPK P=$PRVK"
+ #verbose echo "a b" z
+ #verbose echo "^h ^j" ^z
+}
+
+trap newline EXIT
+
+echo -n "
+ Attention: 'grub2' failed to start the target kernel"
+
+if [ "$ZIPK" != "$RUNK" -a "$RUNK" != "$SYSK" ]; then
+ # i.e. "previous" has been selected via zipl, but it fails!?
+ [ "$RUNK" = "$PRVK" ] &&
+ echo " from previous" ||
+ echo " from unknown"
+
+ echo " ZIPL kernel ($RUNK). If default ($ZIPK)
+ fails as well, please contact support."
+ exit 1
+fi
+echo "."
+if [ "$ZIPK" = "$SYSK" ]; then
+ [ -z "$PRVK" ] &&
+ echo "
+ No kernel update readily available/installed. Please contact support." ||
+ echo "
+ You may want to try the previous kernel ($PRVK) with
+ 'IPL ... LOADPARM 4', as no update kernel is readily available/installed."
+ exit 1
+fi
+
+echo "
+ A newer kernel ($SYSK) is available and will be deployed
+ in $TIMEOUT seconds. To facilitate this, the affected file-systems have
+ to be made writable, then 'grub2-install --force' needs to be run,
+ and, on success, a 'reboot' will be initiated.
+
+ Press 'c[Enter]' to interrupt... "
+
+trap interrupted=1 INT
+interrupted=0
+input=""
+read -t $TIMEOUT input
+case "$input" in
+ ([Cc]) interrupted=2 ;;
+esac
+if [ $interrupted != 0 ]; then
+ echo "
+ Automatic update cancelled..."
+ exit 1
+fi
+trap - INT
+echo "
+ Attempting automatic update..."
+
+ismounted() {
+ local mode="$1"
+ local tgt="$2"
+ local dev mp fs opts dc
+ while read dev mp fs opts dc; do
+ [ "$mp" = "$tgt" ] || continue
+ case ",$opts," in
+ (*,$mode,*) return 0;;
+ esac
+ done < /proc/mounts
+ return 1
+}
+ismp() {
+ local sysr="$1"
+ local tgt="$2"
+ local dev mp fs opts dc
+ while read dev mp fs opts dc; do
+ case "$dev" in
+ ("#"*) continue;;
+ esac
+ [ "$mp" = "$tgt" ] || continue
+ return 0
+ done < $sysr/etc/fstab
+ return 1
+}
+chroot() {
+ local tgt="$1"; shift
+ if [ -z "$tgt" ]; then
+ echo -n "+"
+ verbose "$@"
+ else
+ /usr/bin/chroot "$tgt" "$@"
+ fi
+}
+cleanup() {
+ local mp
+ echo " # cleanup"
+ for mp in $UMOUNT; do
+ verbose chroot "$SYSROOT" umount $mp
+ done
+ for mp in $WMOUNT; do
+ verbose mount -o remount,ro $mp
+ done
+ sync; sync
+ [ -z "$EXIT" ] || echo "$EXIT"
+ echo ""
+}
+trap cleanup EXIT
+UMOUNT=""
+WMOUNT=""
+EXIT=""
+
+echo " # prepare"
+# remount $SYSROOT{,/boot{,/zipl}} read-write
+for mp in {"",/boot{,/zipl}}; do
+ [ -n "$SYSROOT$mp" ] || continue
+ if ismounted rw $SYSROOT$mp; then
+ echo " # $mp: already read-write: ignore"
+ elif ismounted ro $SYSROOT$mp; then
+ verbose mount -o remount,rw $SYSROOT$mp
+ WMOUNT="$SYSROOT$mp $WMOUNT"
+ elif ismp "$SYSROOT" $mp; then
+ verbose chroot "$SYSROOT" mount -w $mp || exit 1
+ UMOUNT="$mp $UMOUNT"
+ fi
+done
+if [ ! -w $SYSROOT/boot/zipl/config ]; then
+ EXIT="ERROR: $SYSROOT/boot/zipl/config not writable! Aborting..."
+ exit 1
+fi
+echo " # action"
+verbose chroot "$SYSROOT" grub2-zipl-setup --force
+ret=$?
+if [ $ret != 0 ]; then
+ EXIT=" # failed ($ret)"
+else
+ EXIT=" # done"
+fi
+exit $ret

View File

@ -1,22 +1,68 @@
---
util/s390x/zipl2grub.conf.in | 2 +-
util/s390x/zipl2grub.pl.in | 19 +++++++++++--------
2 files changed, 12 insertions(+), 9 deletions(-)
util/s390x/zipl2grub.conf.in | 30 +++++++++++++++++++-
util/s390x/zipl2grub.pl.in | 64 +++++++++++++++++++++++++++++--------------
2 files changed, 73 insertions(+), 21 deletions(-)
--- a/util/s390x/zipl2grub.conf.in
+++ b/util/s390x/zipl2grub.conf.in
@@ -8,7 +8,7 @@ defaultmenu = menu
@@ -10,17 +10,45 @@ defaultmenu = menu
image = @zipldir@/image
parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 "
+[grub2-mem1G]
+ target = @zipldir@
+ image = @zipldir@/image
+ ramdisk = @zipldir@/initrd,0x2000000
+ parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 mem=1G "
+
[skip-grub2]
target = @zipldir@
ramdisk = @zipldir@/initrd,0x2000000
image = @zipldir@/image
- parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 "
+ parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 mem=1G "
parameters = "root=@GRUB_DEVICE@ @GRUB_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ "
+#@
+#@[grub2-previous]
+#@ target = @zipldir@
+#@ image = @zipldir@/image.prev
+#@ ramdisk = @zipldir@/initrd.prev,0x2000000
+#@ parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 "
+#@
+#@[grub2-mem1G-previous]
+#@ target = @zipldir@
+#@ image = @zipldir@/image.prev
+#@ ramdisk = @zipldir@/initrd.prev,0x2000000
+#@ parameters = "root=@GRUB_DEVICE@ @GRUB_EMU_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ initgrub quiet splash=silent plymouth.enable=0 mem=1G "
+#@
+#@[skip-grub2-previous]
+#@ target = @zipldir@
+#@ image = @zipldir@/image.prev
+#@ ramdisk = @zipldir@/initrd.prev,0x2000000
+#@ parameters = "root=@GRUB_DEVICE@ @GRUB_CONMODE@ @GRUB_CMDLINE_LINUX@ @GRUB_CMDLINE_LINUX_DEFAULT@ "
[skip-grub2]
:menu
target = @zipldir@
- timeout = 16
+ timeout = 60
default = 1
prompt = 0
1 = grub2
2 = skip-grub2
+ 3 = grub2-mem1G
+#@ 4 = grub2-previous
+#@ 5 = skip-grub2-previous
+#@ 6 = grub2-mem1G-previous
--- a/util/s390x/zipl2grub.pl.in
+++ b/util/s390x/zipl2grub.pl.in
@@ -44,12 +44,12 @@ sub System(@) {
@@ -10,6 +10,7 @@ my $sysconfbl = '@sysconfdir@/sysconfig/
my $defimage = "/boot/image";
my $definitrd = "/boot/initrd";
my $Image = "$defimage";
+my $previous = ".prev";
my $zipldir = "";
my $running = "";
my $refresh = 1; # needs to default to "on" until most bugs are shaken out!
@@ -44,12 +45,12 @@ sub System(@) {
return 0 if ($debug);
system( @C);
if ($? == -1) {
@ -32,7 +78,46 @@
}
return( 0);
}
@@ -166,7 +166,9 @@ sub Usage($) {
@@ -74,11 +75,13 @@ sub ln($$) {
unlink( $_[1]) || Panic( 1, "$C: unlink: $!.\n") if ( -e $_[1]);
symlink($_[0], $_[1]) || Panic( 1, "$C: symlink: $!.\n");
}
-sub BootCopy($$$) {
+
+sub ManagePrev($$$){
my( $file, $dir, $tgt) = @_;
my $curr = "$dir/$tgt";
- my $prev = "$dir/$tgt.prev";
- Info(4, "Copy /boot/$file $dir $tgt\n");
+ my $prev = "$dir/$tgt$previous";
+ my $ret = 0;
+ Info(2, "Manage $prev\n");
if ( -l $curr ) {
my $curf = readlink( $curr);
if ( $curf ne $file ) {
@@ -88,7 +91,21 @@ sub BootCopy($$$) {
rm( $pref);
}
mv( $curr, $prev);
+ $ret = 1;
+ } else {
+ Info(2, " nothing to do ($curr -> $file).\n");
}
+ } else {
+ Info(2, " nothing to do ($curr no sym-link).\n");
+ }
+ return $ret;
+}
+sub BootCopy($$$) {
+ my( $file, $dir, $tgt) = @_;
+ my $curr = "$dir/$tgt";
+ Info(4, "Copy /boot/$file $dir $tgt\n");
+ if ( $tgt eq "image" && ManagePrev( $file, $dir, $tgt)) {
+ ManagePrev( $file, $dir, "initrd")
}
cp( "/boot/$file", "$dir/$file");
ln( $file, $curr);
@@ -163,7 +180,9 @@ sub Usage($) {
"zIPL directory missing.",
"Configuration template missing.",
"Configuration template unreadable.",
@ -43,7 +128,7 @@
""
);
my $msg = "";
@@ -190,7 +192,8 @@ while ( $#ARGV >= 0 ) {
@@ -186,7 +205,8 @@ while ( $#ARGV >= 0 ) {
(/^--?help/ || /^-h/) && (Usage(0));
(/^--zipldir$/ || /^-z$/) && ($zipldir = shift || Usage(2), next);
(/^--template$/ || /^-T$/) && ($in = shift || Usage(3), next);
@ -53,7 +138,39 @@
(/^-/) && (Usage(1));
Usage(1);
}
@@ -403,15 +406,15 @@ if ( -l $Image ) {
@@ -345,7 +365,7 @@ if ( $debug && $verbose > 2 ) {
open( IN, "< $in") ||
Panic( 1, "$C: Failed to open 'zipl.conf' template: $!.\n");
while ( <IN> ) {
- Info( 3, "$.. <$_$.. >");
+ Info( 4, "$.. <$_$.. >");
if ( $. == 1 && m{^## This} ) {
$_ = "## This file was written by 'grub2-install/$C'\n" .
"## filling '$in' as template\n";
@@ -366,7 +386,7 @@ while ( <IN> ) {
}
s{\@$k\@}{$v}g;
}
- Info( 2, $_);
+ Info( 3, $_);
$cfg .= $_;
}
if ( $miss ) {
@@ -374,13 +394,6 @@ if ( $miss ) {
Panic( 1, "$C: 'zipl.conf' template could not be filled. \n");
}
-my $ziplconf = "$zipldir/config";
-if ( ! $debug ) {
- open( OUT, "> $ziplconf") || die;
- print( OUT $cfg) || die;
- close( OUT);
-}
-
# copy out kernel and initrd
my $ziplimage = "$zipldir/image";
my $ziplinitrd = "$zipldir/initrd";
@@ -399,15 +412,15 @@ if ( -l $Image ) {
$Image = readlink( $Image);
}
my ($image, $version) = ($Image =~ m{^(?:/boot/)?([^-]+-(.+))$});
@ -72,3 +189,21 @@
}
if ( $refresh || ChkInitrd( $zipldir, "initrd") <= 0 ) {
MkInitrd( $initrd, $zipldir, $version);
@@ -417,6 +430,17 @@ if ( ChkInitrd( $zipldir, "initrd") == 0
$miss++;
}
+# write zipl config file
+my $ziplconf = "$zipldir/config";
+$cfg =~ s{#@}{}g if ( -r "$ziplimage$previous" && -r "$ziplinitrd$previous" );
+if ( ! $debug ) {
+ open( OUT, "> $ziplconf") || die;
+ print( OUT $cfg) || die;
+ close( OUT);
+} else {
+ print( STDERR $cfg);
+}
+
# now: go for it!
my @C = ( "/sbin/zipl", (($verbose) ? "-Vnc" : "-nc"), "$ziplconf" );
System( @C);

View File

@ -8,7 +8,14 @@ GRUB_ONCE="/usr/sbin/grub2-once"
GRUB_ENV="/boot/grub2/grubenv"
GRUB_EDITENV="/usr/bin/grub2-editenv"
GRUB_CONF="/boot/grub2/grub.cfg"
GRUB_SETUP=
BLKID="/usr/sbin/blkid"
ARCH=`uname -m`
VMLINUZ="vmlinuz"
case $ARCH in
ppc*) VMLINUZ="vmlinux" ;;
s390*) VMLINUZ="image"; GRUB_SETUP="/usr/sbin/grub2-zipl-setup" ;;
esac
error_quit()
{
@ -117,7 +124,6 @@ grub-once-restore()
find-kernel-entry()
{
NEXT_BOOT=""
ARCH=`uname -m`
declare -i I=0
# DEBUG "running kernel: $RUNNING" DIAG
while [ -n "${KERNELS[$I]}" ]; do
@ -126,10 +132,7 @@ find-kernel-entry()
# DEBUG "Found kernel symlink $BOOTING => $IMAGE" INFO
BOOTING=$IMAGE
fi
case $ARCH in
ppc*) BOOTING="${BOOTING#*vmlinux-}" ;;
*) BOOTING="${BOOTING#*vmlinuz-}" ;;
esac
BOOTING="${BOOTING#*${VMLINUZ}-}"
if [ "$RUNNING" == "$BOOTING" -a -n "${MENU_ENTRIES[$I]}" ]; then
NEXT_BOOT="${MENU_ENTRIES[$I]}"
echo " running kernel is grub menu entry $NEXT_BOOT (${KERNELS[$I]})"
@ -149,7 +152,7 @@ find-kernel-entry()
# if we did not find a kernel (or BOOT_LOADER is not GRUB) check,
# if the running kernel is still the one that will (probably) be booted for
# resume (default entry in menu.lst or, if there is none, the kernel file
# /boot/vmlinuz points to.)
# /boot/${VMLINUZ} points to.)
# This will only work, if you use "original" SUSE kernels.
# you can always override with the config variable set to "yes"
prepare-grub()
@ -164,13 +167,14 @@ prepare-grub()
# which kernel is booted with the default entry?
BOOTING="${KERNELS[$DEFAULT_BOOT]}"
# if there is no default entry (no menu.lst?) we fall back to
# the default of /boot/vmlinuz.
[ -z "$BOOTING" ] && BOOTING="vmlinuz"
# the default of /boot/${VMLINUZ}.
[ -z "$BOOTING" ] && BOOTING="${VMLINUZ}"
if IMAGE=`readlink /boot/$BOOTING` && [ -e "/boot/${IMAGE##*/}" ]; then
BOOTING=$IMAGE
fi
BOOTING="${BOOTING#*vmlinuz-}"
BOOTING="${BOOTING#*${VMLINUZ}-}"
echo "running kernel: '$RUNNING', probably booting kernel: '$BOOTING'"
check-setup "$RUNNING"
if [ "$BOOTING" != "$RUNNING" ]; then
error_quit "ERROR: kernel version mismatch, cannot suspend to disk"
fi
@ -180,6 +184,7 @@ prepare-grub()
T1=`date +"%s%N"`
sync; sync; sync # this is needed to speed up grub-once on reiserfs
T2=`date +"%s%N"`
check-setup "$RUNNING"
echo " running $GRUB_ONCE \"${NEXT_BOOT}\""
${GRUB_ONCE} "$NEXT_BOOT"
T3=`date +"%s%N"`
@ -191,6 +196,24 @@ prepare-grub()
echo "INFO: Done."
}
#############################################################################
check-setup()
{
local WANT="$VMLINUZ-$1"
[ -n "$GRUB_SETUP" ] || return
# implementation below is s390x-only (for now)
echo "INFO: check-setup \"$WANT\" .."
HAVE="/boot/zipl/$VMLINUZ"
[ -r "$HAVE" ] ||
error_quit "ERROR: no zipl kernel, cannot suspend to disk"
HAVE=$(readlink $HAVE) ||
error_quit "ERROR: zipl kernel no sym-link, cannot suspend to disk"
[ "$HAVE" != "$WANT" ] ||
{ echo " zipl kernel already in sync, nothing to do"; return; }
echo " running $GRUB_SETUP # (incl. dracut!)" # no --image as running is preferred!
${GRUB_SETUP} > /dev/null 2>&1
}
###### main()

View File

@ -1,8 +1,10 @@
Index: grub-2.02~beta2/util/s390x/zipl2grub.pl.in
===================================================================
--- grub-2.02~beta2.orig/util/s390x/zipl2grub.pl.in
+++ grub-2.02~beta2/util/s390x/zipl2grub.pl.in
@@ -361,6 +361,10 @@ while ( <IN> ) {
---
util/s390x/zipl2grub.pl.in | 4 ++++
1 file changed, 4 insertions(+)
--- a/util/s390x/zipl2grub.pl.in
+++ b/util/s390x/zipl2grub.pl.in
@@ -384,6 +384,10 @@ while ( <IN> ) {
} else {
$v = "";
}
@ -12,4 +14,4 @@ Index: grub-2.02~beta2/util/s390x/zipl2grub.pl.in
+ }
s{\@$k\@}{$v}g;
}
Info( 2, $_);
Info( 3, $_);

View File

@ -1,3 +1,21 @@
-------------------------------------------------------------------
Fri May 17 13:57:29 UTC 2019 - rw@suse.com
- Check/refresh zipl-kernel before hibernate on s390x. (bsc#940457)
(Getting rid of hardcoded 'vmlinuz', which failed on PPC as well.)
* grub2-systemd-sleep.sh
-------------------------------------------------------------------
Fri May 17 12:22:55 UTC 2019 - rw@suse.com
- Try to refresh zipl-kernel on failed kexec. (bsc#1127293)
* grub2-s390x-04-grub2-install.patch
- Fully support "previous" zipl-kernel,
with 'mem=1G' being available on dedicated entries. (bsc#928131)
* grub2-s390x-09-improve-zipl-setup.patch
- Refresh
* grub2-zipl-setup-fix-btrfs-multipledev.patch
-------------------------------------------------------------------
Fri May 3 02:42:27 UTC 2019 - mchang <mchang@suse.com>

View File

@ -941,6 +941,8 @@ install -m 755 -d $R%{dracutgrubmoddir}
for f in module-setup.sh grub2.sh; do
mv $R%{_datadir}/%{name}/%{grubarch}/dracut-$f $R%{dracutgrubmoddir}/$f
done
mv $R%{_datadir}/%{name}/%{grubarch}/dracut-zipl-refresh \
$R%{_datadir}/%{name}/zipl-refresh
rm -f $R%{_sysconfdir}/grub.d/30_os-prober
perl -ni -e '
@ -1149,6 +1151,7 @@ fi
%config(noreplace) %{_sysconfdir}/default/zipl2grub.conf.in
%{dracutlibdir}
%{_sbindir}/%{name}-zipl-setup
%{_datadir}/%{name}/zipl-refresh
%endif
%{_sbindir}/%{name}-install
%{_sbindir}/%{name}-mkconfig