Accepting request 1297697 from network:utilities

OBS-URL: https://build.opensuse.org/request/show/1297697
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/iperf?expand=0&rev=43

iperf-3.17.1.tar.gz.sha256

@@ -1 +0,0 @@
-84404ca8431b595e86c473d8f23d8bb102810001f15feaf610effd3b318788aa  iperf-3.17.1.tar.gz

iperf-3.19.1.tar.gz.sha256

@@ -0,0 +1 @@
+dc63f89ec581ea99f8b558d8eb35109de06383010db5a1906c208a562ba0c270  iperf-3.19.1.tar.gz

iperf.changes

@@ -1,3 +1,90 @@
+-------------------------------------------------------------------
+Mon Aug 04 16:53:44 CEST 2025 - Arvin Schnell <aschnell@suse.com>
+
+- update to 3.19.1:
+  * SECURITY NOTE: Thanks to Han Lee with Apple Information
+    Security for finding and reporting several memory errors
+  * off-by-one heap overflow has been fixed in authentication
+    (bsc#1247519, CVE-2025-54349, ESNET-SECADV-2025-0003)
+  * assert in authentication has been removed
+    (bsc#1247520, CVE-2025-54350, ESNET-SECADV-2025-0002)
+  * a buffer overflow in the --skip-rx-copy option for zerocopy
+    has been fixed (bsc#1247522, CVE-2025-54351,
+    ESNET-SECADV-2025-0001)
+
+-------------------------------------------------------------------
+Wed May 21 16:25:34 UTC 2025 - Aeneas Jaißle <aj@ajaissle.de>
+
+- update to 3.19
+  * iperf3 now supports the use of Multi-Path TCP (MPTCPv1) on Linux
+    with the use of the `-m` or `--mptcp` flag. (PR #1661)
+  * iperf3 now supports a `--cntl-ka` option to enable TCP keepalives
+    on the control connection. (#812, #835, PR #1423)
+  * iperf3 now supports the `MSG_TRUNC` receive option, specified by
+    the `--skip-rx-copy`. This theoretically improves the rated
+    throughput of tests at high bitrates by not delivering network
+    payload data to userspace. (#1678, PR #1717)
+  * A bug that caused the bitrate setting to be ignored when bursts
+    are set, has been fixed. (#1773, #1820, PR #1821, PR #1848)
+  * The congestion control protocol setting, if used, is now
+    properly reset between tests. (PR #1812)
+  * iperf3 now exits with a non-error 0 exit code if exiting via a
+    `SIGTERM`, `SIGHUP`, or `SIGINT`. (#1009, PR# 1829)
+  * The current behavior of iperf3 with respect to the `-n` and `-k`
+    options is now documented as correct. (#1768, #1775, #596, PR #1800)
+
+- switched to official sources from https://downloads.es.net/pub/iperf/
+  following the note on https://software.es.net/iperf/obtaining.html#source-distributions
+  GitHub releases are not guaranteed to always be released with
+  proper checksums, signage and downloads.
+
+- removed patches: iperf-gcc15.patch (included upstream)
+
+-------------------------------------------------------------------
+Wed May  7 09:40:33 UTC 2025 - pgajdos@suse.com
+
+- added patches
+  https://github.com/esnet/iperf/commit/beadb59b90e8d3339d31f9f15525108072fde135
+  + iperf-gcc15.patch
+
+-------------------------------------------------------------------
+Mon Jan 27 17:55:30 UTC 2025 - Dirk Müller <dmueller@suse.com>
+
+- update to 3.18 (bsc#1234705, CVE-2024-53580):
+  * SECURITY NOTE: Thanks to Leonid Krolle Bi.Zone for
+    discovering a JSON type security vulnerability that caused a
+    segmentation fault in the server. (CVE-2024-53580)
+    This has now been fixed. (PR#1810)
+  * UDP packets per second now reports the correct number of
+    packets, by reporting NET_SOFTERROR if there's a EAGAIN/EINTR
+    errno if no data was sent (#1367/PR#1379).
+  * Several segmentation faults related to threading were fixed.
+    One where `pthread_cancel` was called on an improperly
+    initialized thread (#1801), another where threads were being
+    recycled (#1760/PR#1761), and another where threads were
+    improperly handling signals (#1750/PR#1752).
+  * A segmentation fault from calling `freeaddrinfo` with `NULL`
+    was fixed (PR#1755).
+  * Some JSON options were fixed, including checking the size for
+    `json_read` (PR#1709), but the size limit was removed for
+    received server output (PR#1779).
+  * A rcv-timeout error has been fixed. The Nread timeout was
+    hardcoded and timed out before the `--rcv-timeout` option
+  * There is no longer a limit on the omit time period
+  * Fixed an output crash under 32-bit big-endian systems
+  * An issue was fixed where CPU utilization was unexpectedly
+    high during limited baud rate tests. The `--pacing-timer`
+    option was removed, but it is still available in the library
+  * Add SCTP information to `--json` output and fixed compile
+    error when SCTP is not supported (#1731).
+  * `--fq-rate` was changed from a uint to a uint64 to allow
+    pacing above 32G.  Not yet tested on big-endian systems
+
+-------------------------------------------------------------------
+Fri Nov 15 14:49:57 UTC 2024 - Georg Pfuetzenreuter <georg.pfuetzenreuter@suse.com>
+
+- Build with OpenSSL for key based authentication support
+
 -------------------------------------------------------------------
 Wed May 15 10:53:18 UTC 2024 - Dirk Müller <dmueller@suse.com>
 
@@ -507,4 +594,3 @@ Fri Aug 27 18:18:45 UTC 2010 - reddwarf@opensuse.org
 Tue Mar 30 13:03:23 UTC 2010 - poletti.marco@gmail.com
 
 - Initial package, version 2.0.4
-

iperf.spec

@@ -1,7 +1,9 @@
 #
 # spec file for package iperf
 #
-# Copyright (c) 2024 SUSE LLC
+# Copyright (c) 2025 SUSE LLC and contributors
+# Copyright (c) 2025 SUSE LLC and contributors
+# Copyright (c) 2025 SUSE LLC and contributors
 #
 # All modifications and additions to the file contributed by third parties
 # remain the property of their copyright owners, unless otherwise agreed
@@ -18,7 +20,7 @@
 
 %define soname  0
 Name:           iperf
-Version:        3.17.1
+Version:        3.19.1
 Release:        0
 Summary:        A tool to measure network performance
 License:        BSD-3-Clause
@@ -26,12 +28,15 @@ Group:          Productivity/Networking/Diagnostic
 URL:            https://software.es.net/iperf/
 Source:         https://downloads.es.net/pub/iperf/iperf-%{version}.tar.gz
 Source1:        https://downloads.es.net/pub/iperf/iperf-%{version}.tar.gz.sha256
+# GH: https://github.com/esnet/iperf/releases/download/%%{version}/iperf-%%{version}.tar.gz
+# GH: https://github.com/esnet/iperf/releases/download/%%{version}/iperf-%%{version}.tar.gz.sha256
 Requires:       lib%{name}%{soname} = %{version}-%{release}
 %if %{?sles_version} && %{?sles_version} <= 11
 BuildRequires:  libuuid-devel
 %else
 BuildRequires:  pkgconfig(uuid)
 %endif
+BuildRequires:  pkgconfig(openssl)
 
 %description
 Iperf is a tool for active measurements of the maximum achievable bandwidth
@@ -78,7 +83,7 @@ other parameters.
 This package contains development files.
 
 %prep
-%setup -q
+%autosetup -p1
 
 %build
 %configure --disable-static