Accepting request 823346 from devel:kubic

OBS-URL: https://build.opensuse.org/request/show/823346
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/libcontainers-common?expand=0&rev=26

_service

@@ -4,24 +4,32 @@
 <param name="url">https://github.com/containers/storage.git</param>
 <param name="scm">git</param>
 <param name="filename">storage</param>
-<param name="versionformat">1.19.1</param>
-<param name="revision">v1.19.1</param>
+<param name="versionformat">1.20.2</param>
+<param name="revision">v1.20.2</param>
 </service>
 
 <service name="tar_scm" mode="disabled">
 <param name="url">https://github.com/containers/image.git</param>
 <param name="scm">git</param>
 <param name="filename">image</param>
-<param name="versionformat">5.4.4</param>
-<param name="revision">v5.4.4</param>
+<param name="versionformat">5.5.1</param>
+<param name="revision">v5.5.1</param>
 </service>
 
 <service name="tar_scm" mode="disabled">
-<param name="url">https://github.com/containers/libpod.git</param>
+<param name="url">https://github.com/containers/podman.git</param>
 <param name="scm">git</param>
-<param name="filename">libpod</param>
-<param name="versionformat">1.9.3</param>
-<param name="revision">v1.9.3</param>
+<param name="filename">podman</param>
+<param name="versionformat">2.0.3</param>
+<param name="revision">v2.0.3</param>
+</service>
+
+<service name="tar_scm" mode="disabled">
+<param name="url">https://github.com/containers/common.git</param>
+<param name="scm">git</param>
+<param name="filename">common</param>
+<param name="versionformat">0.14.6</param>
+<param name="revision">v0.14.6</param>
 </service>
 
 <service name="recompress" mode="disabled">

common-0.14.6.tar.xz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:0e9111b89df5325547c3014d17eeadf9be2f4e69c1c69f0605ad502960438e83
+size 2194176

containers.conf

@@ -0,0 +1,438 @@
+# The containers configuration file specifies all of the available configuration
+# command-line options/flags for container engine tools like Podman & Buildah,
+# but in a TOML format that can be easily modified and versioned.
+
+# Please refer to containers.conf(5) for details of all configuration options.
+# Not all container engines implement all of the options.
+# All of the options have hard coded defaults and these options will override
+# the built in defaults. Users can then override these options via the command
+# line. Container engines will read containers.conf files in up to three
+# locations in the following order:
+#  1. /usr/share/containers/containers.conf
+#  2. /etc/containers/containers.conf
+#  3. $HOME/.config/containers/containers.conf (Rootless containers ONLY)
+#  Items specified in the latter containers.conf, if they exist, override the
+# previous containers.conf settings, or the default settings.
+
+[containers]
+
+# List of devices. Specified as
+# "<device-on-host>:<device-on-container>:<permissions>", for example:
+# "/dev/sdc:/dev/xvdc:rwm".
+# If it is empty or commented out, only the default devices will be used
+#
+# devices = []
+
+# List of volumes. Specified as
+# "<directory-on-host>:<directory-in-container>:<options>", for example:
+# "/db:/var/lib/db:ro".
+# If it is empty or commented out, no volumes will be added
+#
+# volumes = []
+
+# Used to change the name of the default AppArmor profile of container engine.
+#
+# apparmor_profile = "container-default"
+
+# List of annotation. Specified as
+# "key=value"
+# If it is empty or commented out, no annotations will be added
+#
+# annotations = []
+
+# Default way to to create a cgroup namespace for the container
+# Options are:
+# `private` Create private Cgroup Namespace for the container.
+# `host`    Share host Cgroup Namespace with the container.
+#
+# cgroupns = "private"
+
+# Control container cgroup configuration
+# Determines  whether  the  container will create CGroups.
+# Options are:
+# `enabled`   Enable cgroup support within container
+# `disabled`  Disable cgroup support, will inherit cgroups from parent
+# `no-conmon` Container engine runs run without conmon
+#
+# cgroups = "enabled"
+
+# List of default capabilities for containers. If it is empty or commented out,
+# the default capabilities defined in the container engine will be added.
+#
+# default_capabilities = [
+#    "AUDIT_WRITE",
+#    "CHOWN",
+#    "DAC_OVERRIDE",
+#    "FOWNER",
+#    "FSETID",
+#    "KILL",
+#    "MKNOD",
+#    "NET_BIND_SERVICE",
+#    "NET_RAW",
+#    "SETGID",
+#    "SETPCAP",
+#    "SETUID",
+#    "SYS_CHROOT",
+# ]
+
+# A list of sysctls to be set in containers by default,
+# specified as "name=value",
+# for example:"net.ipv4.ping_group_range = 0 1000".
+#
+# default_sysctls = [
+#  "net.ipv4.ping_group_range=0 1000",
+# ]
+
+# A list of ulimits to be set in containers by default, specified as
+# "<ulimit name>=<soft limit>:<hard limit>", for example:
+# "nofile=1024:2048"
+# See setrlimit(2) for a list of resource names.
+# Any limit not specified here will be inherited from the process launching the
+# container engine.
+# Ulimits has limits for non privileged container engines.
+#
+# default_ulimits = [
+#  "nofile"="1280:2560",
+# ]
+
+# List of default DNS options to be added to /etc/resolv.conf inside of the container.
+#
+# dns_options = []
+
+# List of default DNS search domains to be added to /etc/resolv.conf inside of the container.
+#
+# dns_searches = []
+
+# Set default DNS servers.
+# This option can be used to override the DNS configuration passed to the
+# container. The special value "none" can be specified to disable creation of
+# /etc/resolv.conf in the container.
+# The /etc/resolv.conf file in the image will be used without changes.
+#
+# dns_servers = []
+
+# Environment variable list for the conmon process; used for passing necessary
+# environment variables to conmon or the runtime.
+#
+# env = [
+#    "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
+# ]
+
+# Pass all host environment variables into the container.
+#
+# env_host = false
+
+# Path to OCI hooks directories for automatically executed hooks.
+#
+# hooks_dir = [
+#     "/usr/share/containers/oci/hooks.d",
+# ]
+
+# Default proxy environment variables passed into the container.
+# The environment variables passed in include:
+# http_proxy, https_proxy, ftp_proxy, no_proxy, and the upper case versions of
+# these. This option is needed when host system uses a proxy but container
+# should not use proxy. Proxy environment variables specified for the container
+# in any other way will override the values passed from the host.
+#
+# http_proxy = true
+
+# Run an init inside the container that forwards signals and reaps processes.
+#
+# init = false
+
+#  Container init binary, if init=true, this is the init binary to be used for containers.
+#
+init_path = "/usr/bin/catatonit"
+
+# Default way to to create an IPC namespace (POSIX SysV IPC) for the container
+# Options are:
+# `private` Create private IPC Namespace for the container.
+# `host`    Share host IPC Namespace with the container.
+#
+# ipcns = "private"
+
+# Flag tells container engine to whether to use container separation using
+# MAC(SELinux)labeling or not.
+# Flag is ignored on label disabled systems.
+#
+# label = true
+
+# Logging driver for the container. Available options: k8s-file and journald.
+#
+# log_driver = "k8s-file"
+
+# Maximum size allowed for the container log file. Negative numbers indicate
+# that no size limit is imposed. If positive, it must be >= 8192 to match or
+# exceed conmon's read buffer. The file is truncated and re-opened so the
+# limit is never exceeded.
+#
+# log_size_max = -1
+
+# Default way to to create a Network namespace for the container
+# Options are:
+# `private` Create private Network Namespace for the container.
+# `host`    Share host Network Namespace with the container.
+# `none`    Containers do not use the network
+#
+# netns = "private"
+
+# Create /etc/hosts for the container.  By default, container engine manage
+# /etc/hosts, automatically adding  the container's  own  IP  address.
+#
+# no_hosts = false
+
+# Maximum number of processes allowed in a container.
+#
+# pids_limit = 2048
+
+# Default way to to create a PID namespace for the container
+# Options are:
+# `private` Create private PID Namespace for the container.
+# `host`    Share host PID Namespace with the container.
+#
+# pidns = "private"
+
+# Path to the seccomp.json profile which is used as the default seccomp profile
+# for the runtime.
+#
+# seccomp_profile = "/usr/share/containers/seccomp.json"
+
+# Size of /dev/shm. Specified as <number><unit>.
+# Unit is optional, values:
+# b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
+# If the unit is omitted, the system uses bytes.
+#
+# shm_size = "65536k"
+
+# Set timezone in container. Takes IANA timezones as well as "local",
+# which sets the timezone in the container to match the host machine.
+#
+# tz = ""
+
+# Set umask inside the container
+#
+# umask="0022"
+
+# Default way to to create a UTS namespace for the container
+# Options are:
+# `private`        Create private UTS Namespace for the container.
+# `host`    Share host UTS Namespace with the container.
+#
+# utsns = "private"
+
+# Default way to to create a User namespace for the container
+# Options are:
+# `auto`        Create unique User Namespace for the container.
+# `host`    Share host User Namespace with the container.
+#
+# userns = "host"
+
+# Number of UIDs to allocate for the automatic container creation.
+# UIDs are allocated from the "container" UIDs listed in
+# /etc/subuid & /etc/subgid
+#
+# userns_size=65536
+
+# The network table contains settings pertaining to the management of
+# CNI plugins.
+
+[network]
+
+# Path to directory where CNI plugin binaries are located.
+#
+cni_plugin_dirs = ["/usr/lib/cni"]
+
+# Path to the directory where CNI configuration files are located.
+#
+# network_config_dir = "/etc/cni/net.d/"
+
+[engine]
+
+# Cgroup management implementation used for the runtime.
+# Valid options "systemd" or "cgroupfs"
+#
+# cgroup_manager = "systemd"
+
+# Environment variables to pass into conmon
+#
+# conmon_env_vars = [
+#        "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+# ]
+
+# Paths to look for the conmon container manager binary
+#
+# conmon_path = [
+#        "/usr/libexec/podman/conmon",
+#        "/usr/local/libexec/podman/conmon",
+#        "/usr/local/lib/podman/conmon",
+#        "/usr/bin/conmon",
+#        "/usr/sbin/conmon",
+#        "/usr/local/bin/conmon",
+#        "/usr/local/sbin/conmon"
+# ]
+
+# Specify the keys sequence used to detach a container.
+# Format is a single character [a-Z] or a comma separated sequence of
+# `ctrl-<value>`, where `<value>` is one of:
+# `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_`
+#
+# detach_keys = "ctrl-p,ctrl-q"
+
+# Determines whether engine will reserve ports on the host when they are
+# forwarded to containers. When enabled, when ports are forwarded to containers,
+# ports are held open by as long as the container is running, ensuring that
+# they cannot be reused by other programs on the host. However, this can cause
+# significant memory usage if a container has many ports forwarded to it.
+# Disabling this can save memory.
+#
+# enable_port_reservation = true
+
+# Environment variables to be used when running the container engine (e.g., Podman, Buildah).
+# For example "http_proxy=internal.proxy.company.com".
+# Note these environment variables will not be used within the container.
+# Set the env section under [containers] table, if you want to set environment variables for the container.
+# env = []
+
+# Selects which logging mechanism to use for container engine events.
+# Valid values are `journald`, `file` and `none`.
+#
+# events_logger = "journald"
+
+# Default transport method for pulling and pushing for images
+#
+# image_default_transport = "docker://"
+
+# Default command to run the infra container
+#
+# infra_command = "/pause"
+
+# Infra (pause) container image name for pod infra containers.  When running a
+# pod, we start a `pause` process in a container to hold open the namespaces
+# associated with the  pod.  This container does nothing other then sleep,
+# reserving the pods resources for the lifetime of the pod.
+#
+# infra_image = "k8s.gcr.io/pause:3.2"
+
+# Specify the locking mechanism to use; valid values are "shm" and "file".
+# Change the default only if you are sure of what you are doing, in general
+# "file" is useful only on platforms where cgo is not available for using the
+# faster "shm" lock type.  You may need to run "podman system renumber" after
+# you change the lock type.
+#
+# lock_type** = "shm"
+
+# Default engine namespace
+# If engine is joined to a namespace, it will see only containers and pods
+# that were created in the same namespace, and will create new containers and
+# pods in that namespace.
+# The default namespace is "", which corresponds to no namespace. When no
+# namespace is set, all containers and pods are visible.
+#
+# namespace = ""
+
+# Whether to use chroot instead of pivot_root in the runtime
+#
+# no_pivot_root = false
+
+# Number of locks available for containers and pods.
+# If this is changed, a lock renumber must be performed (e.g. with the
+# 'podman system renumber' command).
+#
+# num_locks = 2048
+
+# Whether to pull new image before running a container
+# pull_policy = "missing"
+
+# Directory for persistent engine files (database, etc)
+# By default, this will be configured relative to where the containers/storage
+# stores containers
+# Uncomment to change location from this default
+#
+# static_dir = "/var/lib/containers/storage/libpod"
+
+# Directory for temporary files. Must be tmpfs (wiped after reboot)
+#
+# tmp_dir = "/var/run/libpod"
+
+# Directory for libpod named volumes.
+# By default, this will be configured relative to where containers/storage
+# stores containers.
+# Uncomment to change location from this default.
+#
+# volume_path = "/var/lib/containers/storage/volumes"
+
+# Default OCI runtime
+#
+# runtime = "runc"
+
+# List of the OCI runtimes that support --format=json.  When json is supported
+# engine will use it for reporting nicer errors.
+#
+# runtime_supports_json = ["crun", "runc", "kata"]
+
+# List of the OCI runtimes that supports running containers without cgroups.
+#
+# runtime_supports_nocgroups = ["crun"]
+
+# List of the OCI runtimes that supports running containers with KVM Separation.
+#
+# runtime_supports_kvm = ["kata"]
+
+# Number of seconds to wait for container to exit before sending kill signal.
+# stop_timeout = 10
+
+# Index to the active service
+# active_service = production
+
+# map of service destinations
+# [service_destinations]
+#   [service_destinations.production]
+#     URI to access the Podman service
+#     Examples:
+#       rootless "unix://run/user/$UID/podman/podman.sock" (Default)
+#       rootfull "unix://run/podman/podman.sock (Default)
+#       remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock
+#       remote rootfull ssh://root@10.10.1.136:22/run/podman/podman.sock
+#     uri="ssh://user@production.example.com/run/user/1001/podman/podman.sock"
+#     Path to file containing ssh identity key
+#     identity = "~/.ssh/id_rsa"
+
+# Paths to look for a valid OCI runtime (runc, runv, kata, etc)
+[engine.runtimes]
+# runc = [
+#        "/usr/bin/runc",
+#        "/usr/sbin/runc",
+#        "/usr/local/bin/runc",
+#        "/usr/local/sbin/runc",
+#        "/sbin/runc",
+#        "/bin/runc",
+#        "/usr/lib/cri-o-runc/sbin/runc",
+# ]
+
+# crun = [
+#            "/usr/bin/crun",
+#            "/usr/sbin/crun",
+#            "/usr/local/bin/crun",
+#            "/usr/local/sbin/crun",
+#            "/sbin/crun",
+#            "/bin/crun",
+#            "/run/current-system/sw/bin/crun",
+# ]
+
+# kata = [
+#            "/usr/bin/kata-runtime",
+#            "/usr/sbin/kata-runtime",
+#            "/usr/local/bin/kata-runtime",
+#            "/usr/local/sbin/kata-runtime",
+#            "/sbin/kata-runtime",
+#            "/bin/kata-runtime",
+#            "/usr/bin/kata-qemu",
+#            "/usr/bin/kata-fc",
+# ]
+
+# The [engine.runtimes] table MUST be the last entry in this file.
+# (Unless another table is added)
+# TOML does not provide a way to end a table other than a further table being
+# defined, so every key hereafter will be part of [runtimes] and not the main
+# config.

image-5.4.4.tar.xz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:725415ff2b8e8ce6b24c22be50f16ac11ee03826508d22bcc0e1fb86f757cf77
-size 302968

image-5.5.1.tar.xz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e4fedb64bd9196c0526b3d69de2113aaeb66a10680b21b22bbc5369224a2d312
+size 305952

libcontainers-common.changes

@@ -1,3 +1,21 @@
+-------------------------------------------------------------------
+Tue Jul 28 13:22:02 UTC 2020 - Ralf Haferkamp <rhafer@suse.com>
+
+- Added containers/common tarball for containers.conf(5) man page
+- Install containers.conf default configuration in
+  /usr/share/containers
+- libpod repository on github got renamed to podman
+- Update to image 5.5.1
+  - Add documentation for credHelpera
+  - Add defaults for using the rootless policy path
+- Update libpod/podman to 2.0.3
+  - docs: user namespace can't be shared in pods
+  - Switch references from libpod.conf to containers.conf
+  - Allow empty host port in --publish flag
+  - update document login see config.json as valid
+- Update storage to 1.20.2
+  - Add back skip_mount_home
+
 -------------------------------------------------------------------
 Fri Jun 19 09:57:44 UTC 2020 - Ralf Haferkamp <rhafer@suse.com>
 

libcontainers-common.spec

@@ -15,17 +15,20 @@
 # Please submit bugfixes or comments via https://bugs.opensuse.org/
 #
 
-# libpodver - version from containers/libpod
-%define libpodver 1.9.3
+# commonver - version from containers/common
+%define commonver 0.14.6
+
+# podman - version from containers/podman
+%define podmanver 2.0.3
 
 # storagever - version from containers/storage
-%define storagever 1.19.1
+%define storagever 1.20.2
 
 # imagever - version from containers/image
-%define imagever 5.4.4
+%define imagever 5.5.1
 
 Name:           libcontainers-common
-Version:        20200603
+Version:        20200727
 Release:        0
 Summary:        Configuration files common to github.com/containers
 License:        Apache-2.0 and GPL-3.0+
@@ -38,8 +41,10 @@ Source3:        policy.json
 Source4:        storage.conf
 Source5:        mounts.conf
 Source6:        registries.conf
-Source7:        libpod-%{libpodver}.tar.xz
+Source7:        podman-%{podmanver}.tar.xz
 Source8:        default.yaml
+Source9:        common-%{commonver}.tar.xz
+Source10:       containers.conf
 BuildRequires:  go-go-md2man
 Provides:       libcontainers-image
 Provides:       libcontainers-storage
@@ -56,7 +61,8 @@ github.com/containers libraries, such as Buildah, CRI-O, Podman and Skopeo.
 %prep
 %setup -q -T -D -b 0 -n image-%{imagever}
 %setup -q -T -D -b 1 -n storage-%{storagever}
-%setup -q -T -D -b 7 -n libpod-%{libpodver}
+%setup -q -T -D -b 7 -n podman-%{podmanver}
+%setup -q -T -D -b 9 -n common-%{commonver}
 # copy the LICENSE file in the build root
 cd ..
 cp %{SOURCE2} .
@@ -82,12 +88,16 @@ done
 rename '.5.md' '.5' docs/*
 rename '.md' '.1' docs/*
 cd ..
-# compile subset of containers/libpod manpages
-cd libpod-%{libpodver}
+# compile subset of containers/podman manpages
+cd podman-%{podmanver}
 go-md2man -in docs/source/markdown/containers-mounts.conf.5.md -out docs/source/markdown/containers-mounts.conf.5 
 go-md2man -in pkg/hooks/docs/oci-hooks.5.md -out pkg/hooks/docs/oci-hooks.5
 cd ..
 
+cd common-%{commonver}
+make docs
+cd ..
+
 %install
 cd ..
 install -d -m 0755 %{buildroot}/%{_sysconfdir}/containers
@@ -101,8 +111,9 @@ install -D -m 0644 %{SOURCE5} %{buildroot}/%{_datadir}/containers/mounts.conf
 install -D -m 0644 %{SOURCE5} %{buildroot}/%{_sysconfdir}/containers/mounts.conf
 install -D -m 0644 %{SOURCE6} %{buildroot}/%{_sysconfdir}/containers/registries.conf
 install -D -m 0644 %{SOURCE8} %{buildroot}/%{_sysconfdir}/containers/registries.d/default.yaml
-install -D -m 0644 libpod-%{libpodver}/seccomp.json %{buildroot}/%{_datadir}/containers/seccomp.json
-install -D -m 0644 libpod-%{libpodver}/seccomp.json %{buildroot}/%{_sysconfdir}/containers/seccomp.json
+install -D -m 0644 %{SOURCE10} %{buildroot}/%{_datadir}/containers/containers.conf
+install -D -m 0644 podman-%{podmanver}/seccomp.json %{buildroot}/%{_datadir}/containers/seccomp.json
+install -D -m 0644 podman-%{podmanver}/seccomp.json %{buildroot}/%{_sysconfdir}/containers/seccomp.json
 
 install -d %{buildroot}/%{_mandir}/man1
 install -d %{buildroot}/%{_mandir}/man5
@@ -110,8 +121,9 @@ install -D -m 0644 image-%{imagever}/docs/*.1 %{buildroot}/%{_mandir}/man1/
 install -D -m 0644 image-%{imagever}/docs/*.5 %{buildroot}/%{_mandir}/man5/
 install -D -m 0644 storage-%{storagever}/docs/*.1 %{buildroot}/%{_mandir}/man1/
 install -D -m 0644 storage-%{storagever}/docs/*.5 %{buildroot}/%{_mandir}/man5/
-install -D -m 0644 libpod-%{libpodver}/pkg/hooks/docs/oci-hooks.5 %{buildroot}/%{_mandir}/man5/
-install -D -m 0644 libpod-%{libpodver}/docs/source/markdown/containers-mounts.conf.5 %{buildroot}/%{_mandir}/man5/
+install -D -m 0644 podman-%{podmanver}/pkg/hooks/docs/oci-hooks.5 %{buildroot}/%{_mandir}/man5/
+install -D -m 0644 podman-%{podmanver}/docs/source/markdown/containers-mounts.conf.5 %{buildroot}/%{_mandir}/man5/
+install -D -m 0644 common-%{commonver}/docs/containers.conf.5 %{buildroot}/%{_mandir}/man5/
 
 %post
 # If installing, check if /var/lib/containers (or /var/lib in its defect) is btrfs and set driver
@@ -140,6 +152,7 @@ fi
 %config(noreplace) %{_sysconfdir}/containers/seccomp.json
 %config(noreplace) %{_sysconfdir}/containers/registries.d/default.yaml
 %{_datadir}/containers/seccomp.json
+%{_datadir}/containers/containers.conf
 
 %{_mandir}/man1/*.1%{?ext_man}
 %{_mandir}/man5/*.5%{?ext_man}

libpod-1.9.3.tar.xz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:040c48a18116eeae239dee548ca977f49fe5ce89663f39d5b720a918c0495a8e
-size 5085100

podman-2.0.3.tar.xz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:306e5d273a6b3d298bc921d1c71a7bcadc07f304c63264c57339b85197db4326
+size 5352032

storage-1.19.1.tar.xz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:8770d1183c94cca77c5f14f17528c619d9d0c0588bf2eb388163f00b613c0f63
-size 1550304

storage-1.20.2.tar.xz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e58d95f7fa0c3de2af79065e238865f40a44e43809f4f63a36997db740c56e7a
+size 1564396