- update to 3.2.4
* DANE interoperability. Postfix builds with OpenSSL 1.0.0 or
1.0.1 failed to send email to some sites with "TLSA 2 X X" DNS
records associated with an intermediate CA certificate. Problem
report and initial fix by Erwan Legrand.
* Missing dynamicmaps support in the Postfix sendmail command.
This broke authorized_submit_users settings that use a
dynamically-loaded map type. Problem reported by Ulrich Zehl.
OBS-URL: https://build.opensuse.org/request/show/537545
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=284
that daemon_directory and shlib_directory is different to
avoid use of the shared directories also as per-instance directories.
For this reason daemon_directory was set to /usr/lib/postfix/bin/.
shlib_directory stands /usr/lib/postfix/.
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=280
- update to 3.2.3
* Extension propagation was broken with "recipient_delimiter = .".
This change reverts a change that was trying to be too clever.
* The postqueue command would abort with a panic message after it
experienced an output write error while listing the mail queue.
This change restores a write error check that was lost with the
Postfix 3.2 rewrite of the vbuf_print formatter.
* Restored sanity checks for dynamically-specified width and precision
in format strings (%*, %.*, and %*.*). These checks were lost with
the Postfix 3.2 rewrite of the vbuf_print formatter.
OBS-URL: https://build.opensuse.org/request/show/528692
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=275
- FATE#322322 Update postfix to version 3.X
Merging changes with SLES12-SP2
Removeved patches: add_missed_library.patch bnc#947707.diff dynamic_maps.patch postfix-db6.diff
postfix-opensslconfig.patch bnc#947519.diff dynamic_maps_pie.patch
postfix-linux45.patch postfix-post-install.patch
These are included in the new version of postfix
- Remove references to SuSEconfig.postfix from sysconfig docs.
(bsc#871575)
- bnc#947519 SuSEconfig.postfix should enforce umask 022
- bnc#947707 mail generated by Amavis being prevented from being re-adressed by /etc/postfix/virtual
- bnc#972346 /usr/sbin/SuSEconfig.postfix is wrong
OBS-URL: https://build.opensuse.org/request/show/449692
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=248
- update to 3.1.4
* The postscreen daemon did not merge the client test status information
for concurrent sessions from the same IP address.
* The Postfix SMTP server falsely rejected a sender address when validating
a sender address with "smtpd_reject_unlisted_recipient = yes" or with
"reject_unlisted_sender". Cause: the address validation code did not query sender_canonical_maps.
* The virtual delivery agent did not detect failure to skip to the end
of a mailbox file, so that mail would be delivered to the beginning of the file.
This could happen when a mailbox file was already larger than the virtual mailbox size limit.
* The postsuper logged an incorrect rename operation count after creating a missing directory.
* The Postfix SMTP server falsely rejected mail when a sender-dependent "error"
transport was configured. Cause: the SMTP server address validation code
was not updated when the sender_dependent_default_transport_maps feature
was introduced.
* The Postfix SMTP server falsely rejected an SMTPUTF8 sender address, when "smtpd_delay_reject = no".
* The "postfix tls deploy-server-cert" command used the wrong certificate
and key file. This was caused by a cut-and-paste error in the postfix-tls-script file.
OBS-URL: https://build.opensuse.org/request/show/448623
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=247
- bnc#981097 config.postfix creates broken main.cf for tls client configuration
- bnc#981099 /etc/sysconfig/postfix: POSTFIX_SMTP_TLS_CLIENT incomplete
- update to 3.1.1:
- The new address_verify_pending_request_limit
parameter introduces a safety limit for the number of address
verification probes in the active queue. The default limit is 1/4
of the active queue maximum size. The queue manager enforces the
limit by tempfailing probe messages that exceed the limit. This
design avoids dependencies on global counters that get out of sync
after a process or system crash.
- Machine-readable, JSON-formatted queue listing with "postqueue -j"
(no "mailq" equivalent).
- The milter_macro_defaults feature provides an optional list of macro
name=value pairs. These specify default values for Milter macros when
no value is available from the SMTP session context.
- Support to enforce a destination-independent delay between email
deliveries. The following example inserts 20 seconds of delay
between all deliveries with the SMTP transport, limiting the delivery
rate to at most three messages per minute.
smtp_transport_rate_delay = 20s
- Historically, the default setting "postscreen_dnsbl_ttl = 1h" assumes
that a "not found" result from a DNSBL server will be valid for one
hour. This may have been adequate five years ago when postscreen
was first implemented, but nowadays, that one hour can result in
missed opportunities to block new spambots.
To address this, postscreen now respects the TTL of DNSBL "not
found" replies, as well as the TTL of DNSWL replies (both "found"
and "not found"). The TTL for a "not found" reply is determined
according to RFC 2308 (the TTL of an SOA record in the reply).
Support for DNSBL or DNSWL reply TTL values is controlled by two
OBS-URL: https://build.opensuse.org/request/show/397601
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=235
- fix build on sle11 by pointing _libexecdir to /usr/lib all the
time.
- some distros did not pull pkgconfig indirectly. pull it directly.
- fix building the dynamic maps: the old build had postgresql e.g.
with missing symbols.
- convert to AUXLIBS_* instead of plain AUXLIBS which is needed
for proper dynamic maps.
- reordered the CCARGS and AUXLIBS* lines to group by feature
- use pkgconfig or *_config tools where possible
- picked up signed char from fedora spec file
- enable lmdb support: new BR lmdb-devel, new subpackage
postfix-lmdb.
- don't delete vmail user/groups
OBS-URL: https://build.opensuse.org/request/show/376737
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=233
- update to 3.1.0
- Since version 3.0 postfix supports dynamic loading of cdb:, ldap:,
lmdb:, mysql:, pcre:, pgsql:, sdbm:, and sqlite: database clients.
Thats why the patches dynamic_maps.patch and dynamic_maps_pie.patch
could be removed.
- Adapting all the patches to postfix 3.1.0
- The patch postfix-db6.diff is not more neccessary
- Backwards-compatibility safety net.
With NEW Postfix installs, you MUST install a main.cf file with
the setting "compatibility_level = 2". See conf/main.cf for an
example.
With UPGRADES of existing Postfix systems, you MUST NOT change the
main.cf compatibility_level setting, nor add this setting if it
does not exist.
Several Postfix default settings have changed with Postfix 3.0. To
avoid massive frustration with existing Postfix installations,
Postfix 3.0 comes with a safety net that forces Postfix to keep
running with backwards-compatible main.cf and master.cf default
settings. This safety net depends on the main.cf compatibility_level
setting (default: 0). Details are in COMPATIBILITY_README.
- Major changes - tls
* [Feature 20160207] A new "postfix tls" command to quickly enable
opportunistic TLS in the Postfix SMTP client or server, and to
manage SMTP server keys and certificates, including certificate
signing requests and TLSA DNS records for DANE.
* As of the middle of 2015, all supported Postfix releases no longer
nable "export" grade ciphers for opportunistic TLS, and no longer
use the deprecated SSLv2 and SSLv3 protocols for mandatory or
OBS-URL: https://build.opensuse.org/request/show/373635
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=232
* Fix for DMARC implementations based on SPF policy plus DKIM Milter.
* The Postfix SMTP server logged an incorrect client name in reject
messages for check_reverse_client_hostname_access and check_reverse_client_hostname_{mx,ns}_access.
* The qmqpd daemon crashed with null pointer bug when logging a lost connection while not in a mail transaction.
* The TLS client logged that an anonymous TLS connection was "Untrusted", instead of "Anonymous".
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=230
- postfix-SuSE.tar.gz/postfix.service: None of
nss-lookup.target network.target local-fs.target time-sync.target
should be Wanted or Required except by the services
the implement the relevant functionality i.e network.target
is wanted/required by networkmanager, wicked,
systemd-network. other software must be ordered After them,
see systemd.special(7)
OBS-URL: https://build.opensuse.org/request/show/309705
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=223
- Bugfix (introduced: Postfix 2.6):
sender_dependent_relayhost_maps ignored the relayhost setting
in the case of a DUNNO lookup result. It would use the
recipient domain instead. Viktor Dukhovni. Wietse took the
pieces of code that enforce the precedence of a
sender-dependent relayhost, the global relayhost, and the
recipient domain, and put that code together in once place so
that it is easier to maintain. File:
trivial-rewrite/resolve.c.
- Bitrot: prepare for future changes in OpenSSL API. Viktor
Dukhovni. File: tls_dane.c.
- Incompatibility: specifying "make makefiles" with "CC=command"
will no longer override the default WARN setting.
OBS-URL: https://build.opensuse.org/package/show/server:mail/postfix?expand=0&rev=216
