- Update to version 0.4.90+git25.95cfa9e:
* wpctl: fix settings --help listing
* docs: conf_file: small updates
* docs: installing: update dependency versions
* si-linkables: do not fully reset when the underlying proxy is
destroyed
* registry: move to a separate file and decouple it from the
object manager
* log: docs: document the log topic definition macros
* monitors/bluez: add 'internal' prefix to internal bluez node
names.
* monitor/bluez: set node.name property when creating combine
stream
* meson: bump min pipewire version to 1.0.2
* scripts: fix regression in state-routes.lua when marking routes
as 'active'
* scripts: improve linking logs
* monitors: use parseBool for boolean properties in rules
* config: add {device|node}.disable
* object-interest: make WP_INTEREST_MATCH_ALL part of the enum
* proxy: make the FEATURES_MINIMAL and FEATURES_ALL constants
part of the enum
* log: fix WP_LOG_LEVEL_TRACE value in the g-i bindings
* base-dirs: wrap flag groups in parenthesis
* log.h: define G_LOG_DOMAIN only if
WP_USE_LOCAL_LOG_TOPIC_IN_G_LOG is defined
* meson: make sure the boolean options have boolean values
* meson: move the common CFLAGS to project-wide scope
* scripts: make sure target is not nil when iterating filters
with matching targets
OBS-URL: https://build.opensuse.org/request/show/1157293
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=71
- Update to version 0.4.90 (0.5.0 RC1)
* Highlights:
- The configuration system has been changed back to load files
from the WirePlumber configuration directories, such as
/etc/wireplumber and $XDG_CONFIG_HOME/wireplumber, unlike in
the pre-releases. This was done because issues were observed
with installations that use a different prefix for pipewire
and wireplumber. If you had a wireplumber.conf file in
/etc/pipewire or $XDG_CONFIG_HOME/pipewire, you should move
it to /etc/wireplumber or $XDG_CONFIG_HOME/wireplumber
respectively (!601)
- The internal base directories lookup system now also respects
the XDG_CONFIG_DIRS and XDG_DATA_DIRS environment variables,
and their default values as per the XDG spec, so it is
possible to install configuration files also in places like
/etc/xdg/wireplumber and override system-wide data paths
(!601)
- wpctl now has a settings subcommand to show, change and
delete settings at runtime. This comes with changes in the
WpSettings system to validate settings using a schema that is
defined in the configuration file. The schema is also
exported on a metadata object, so it is available to any
client that wants to expose WirePlumber settings (!599, !600)
- The WpConf API has changed to not be a singleton and support
opening arbitrary config files. The main config file now
needs to be opened prior to creating a WpCore and passed to
the core using a property. The core uses that without letting
the underlying pw_context open and read the default
client.conf. The core also closes the WpConf after all
components are loaded, which means all the config loading is
OBS-URL: https://build.opensuse.org/request/show/1154974
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=67
- Add patch from upstream to remove the "clear-persistent"
sub-command and add a "settings" sub-command:
* 0001-wpctl-add-settings-subcomand-to-show_-delete-or-change.patch
- Update to version 0.4.82 (0.5.0 pre-release 2)
* Highlights:
- Bluetooth auto-switching is now implemented with a virtual
source node. When an application links to it, the actual
device switches to the HSP/HFP profile to provide the real
audio stream. This is a more robust solution that works with
more applications and is more user-friendly than the previous
application whitelist approach
- Added support for dynamic log level changes via the PipeWire
settings metadata. Also added support for log level patterns
in the configuration file
- The "persistent" (i.e. stored) settings approach has changed
to use two different metadata objects: sm-settings and
persistent-sm-settings. Changes in the former are applied in
the current session but not stored, while changes in the
latter are stored and restored at startup. Some work was also
done to expose a wpctl interface to read and change these
settings, but more is underway
- Several WirePlumber-specific node properties that used to be
called target.* have been renamed to node.* to match the
PipeWire convention of node.dont-reconnect. These are also
now fully documented
* Other changes:
- Many documentation updates
- Added support for SNAP container permissions
- Fixed multiple issues related to restoring the Route
OBS-URL: https://build.opensuse.org/request/show/1147639
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=66
- Update to version 0.4.16:
* Additions:
- Added a new "sm-objects" script that allows loading objects
on demand via metadata entries that describe the object to
load; this can be used to load pipewire modules, such as
filters or network sources/sinks, on demand
- Added a mechanism to override device profile priorities in
the configuration, mainly as a way to re-prioritize Bluetooth
codecs, but this also can be used for other devices
- Added a mechanism in the endpoints policy to allow connecting
filters between a certain endpoint's virtual sink and the
device sink; this is specifically intended to allow plugging
a filter-chain to act as equalizer on the Multimedia endpoint
- Added wp_core_get_own_bound_id() method in WpCore
* Changes:
- PipeWire 0.3.68 is now required
- policy-dsp now has the ability to hide hardware nodes behind
the DSP sink to prevent hardware misuse or damage
- JSON parsing in Lua now allows keys inside objects to be
without quotes
- Added optional argument in the Lua JSON parse() method to
limit recursions, making it possible to partially parse a
JSON object
- It is now possible to pass nil in Lua object constructors
that expect an optional properties object; previously,
omitting the argument was the only way to skip the properties
- The endpoints policy now marks the endpoint nodes as
"passive" instead of marking their links, adjusting for the
behavior change in PipeWire 0.3.68
- Removed the "passive" property from si-standard-link, since
OBS-URL: https://build.opensuse.org/request/show/1128888
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=63
- Add patch from upstream that fixes too many matches for property
interest:
* 0001-object-manager-reduce-the-amount-of-globals-that-initially.patch
- Add patch from upstream that fixes an odd failure of a test after
applying the previous patch:
* 0002-object-manager-use-an-idle-callback-to-expose-tmp-globals.patch
- Add patch from upstream that adds ability to hide parent nodes,
which is useful to prevent hardware misuse or damage by poorly
behaves/configured clients:
* 0001-policy-dsp-add-ability-to-hide-parent-nodes.patch
OBS-URL: https://build.opensuse.org/request/show/1121397
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=61
- Update to version 0.4.15:
* Additions:
- A new "DSP policy" module has been added; its purpose is to
automatically load a filter-chain when a certain hardware
device is present, so that audio always goes through this
software DSP before reaching the device. This is mainly to
support Apple M1/M2 devices, which require a software DSP
to be always present
- WpImplModule now supports loading module arguments directly
from a SPA-JSON config file; this is mainly to support DSP
configuration for Apple M1/M2 and will likely be reworked
for 0.5
- Added support for automatically combining Bluetooth LE Audio
device sets (e.g. pairs of earbuds) (!500)
- Added command line options in wpctl to display device/node
names and nicknames instead of descriptions
- Added zsh completions file for wpctl
- The device profile selection policy now respects the
device.profile property if it is set on the device; this is
useful to hand-pick a profile based on static configuration
rules (alsa_monitor.rules)
* Changes/Fixes:
- Linking policy now sends an error to the client before
destroying the node, if it determines that the node cannot be
linked to any target; this fixes error reporting on the
client side
- Fixed a crash in suspend-node that could happen when
destroying virtual sinks that were loaded from another
process such as pw-loopback
- Virtual machine default period size has been bumped to 1024
OBS-URL: https://build.opensuse.org/request/show/1117592
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=60
- Backport the workaround from SLE/Leap for the bug in systemd
scripts that didn't set the default enable state for the
wireplumber user service when installing wireplumber. The bug
(boo#1200485) was fixed but that's only for new installations
while this workaround will fix old installations (boo#1202008).
This is used to automatically fix installations of
SLE 15 SP4/Leap 15.4 that were not updated during it's lifetime
and upgrade directly to SP5/15.5 .
OBS-URL: https://build.opensuse.org/request/show/1058202
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=56
- wpctl now supports using
@DEFAULT_{AUDIO_,VIDEO_,}{SINK,SOURCE}@ as ID, almost like
pactl. Additionally, it supports a --pid flag for changing
volume and mute state by specifying a process ID, applying
the state to all nodes of a specific client process.
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=43
- Update to version 0.4.9:
* Fixes:
- restore-stream no longer crashes if properties for it are not
present in the config (#190)
- spa-json no longer crashes on non-x86 architectures
- Fixed a potential crash in the bluetooth auto-switch module
(#193)
- Fixed a race condition that would cause Zoom desktop audio
sharing to fail (#197)
- Surround sound in some games is now exposed properly
(pipewire#876)
- Fixed a race condition that would cause the default source &
sink to not be set at startup
- policy-node now supports the 'target.object' key on streams
and metadata
- Multiple fixes in policy-node that make the logic in some
cases behave more like PulseAudio (regarding nodes with the
dont-reconnect property and regarding following the default
source/sink)
- Fixed a bug with parsing unquoted strings in spa-json
* Misc:
- The policy now supports configuring "persistent" device
profiles. If a device is manually set to one of these
profiles, then it will not be auto-switched to another
profile automatically under any circumstances (#138, #204)
- The device-activation module was re-written in lua
- Brave, Edge, Vivaldi and Telegram were added in the bluetooth
auto-switch applications list
- ALSA nodes now use the PCM name to populate node.nick, which
is useful at least on HDA cards using UCM, where all outputs
OBS-URL: https://build.opensuse.org/request/show/964074
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=35
- Update to version 0.4.8:
* Highlights:
- Added bluetooth profile auto-switching support. Bluetooth
headsets will now automatically switch to the HSP/HFP profile
when making a call and go back to the A2DP profile after the
call ends (#90)
- Added an option (enabled by default) to auto-switch to
echo-cancel virtual device nodes when the echo-cancel module
is loaded in pipewire-pulse, if there is no other configured
default node
* Fixes:
- Fixed a regression that prevented nodes from being selected
as default when using the pro-audio profile (#163)
- Fixed a regression that caused encoded audio streams to stall
(#178)
- Fixed restoring bluetooth device profiles
* Library:
- A new WpSpaJson API was added as a front-end to spa-json.
This is also exposed to Lua, so that Lua scripts can natively
parse and write data in the spa-json format
* Misc:
- wpctl can now list the configured default sources and sinks
and has a new command that allows clearing those configured
defaults, so that wireplumber goes back to choosing the
default nodes based on node priorities
- The restore-stream script now has its own configuration file
in main.lua.d/40-stream-defaults.lua and has independent
options for restoring properties and target nodes
- The restore-stream script now supports rule-based
configuration to disable restoring volume properties and/or
OBS-URL: https://build.opensuse.org/request/show/952225
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=30
- Back to version 0.4.6, and add patches incrementally
to bisect it and find the issue
* 0001-policy-node-fix-typo-when-finding-best-target.patch
* 0002-policy-node-schedule-a-rescan-without-timeout-if-def.patch
* 0003-policy-node-find-best-linkable-if-default-one-cannot.patch
* 0004-spa-pod-fix-different-architecture-errors-for-boolea.patch
* 0005-config-update-the-endpoints-config.patch
* 0006-policy-endpoint-client.lua-fix-record-with-endpoints.patch
* 0007-default-nodes-check-if-the-ports-exist-in-rescan_om.patch
* 0008-scripts-monitors-log-warning-if-spa-devices-were-not.patch
- Remove revert from previous change:
* 0001-reversed-default-nodes-check-if-default-node-has-available-ro.patch
OBS-URL: https://build.opensuse.org/request/show/948445
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=24
- Since wireplumber keeps failing to run in openQA since 0.4.7,
let's drop all patches added since then:
* 0001-core-add-API-to-check-if-running-in-a-virtual-machine.patch
* 0002-alsa-monitor-set-period-size-and-headroom-props-if-running-in-virtual-machine.patch
* 0002-default-nodes-handle-nodes-without-Routes.patch
- And revert one of the commits introduced in 0.4.7:
* 0001-reversed-default-nodes-check-if-default-node-has-available-ro.patch
OBS-URL: https://build.opensuse.org/request/show/948381
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=23
- Update to version 0.4.7:
* Fixed a regression in 0.4.6 that caused the selection of the
default audio sources and sinks to be delayed until some event,
which effectively caused losing audio output in many
circumstances (glfo#pipewire/wireplumber#148,
glfo#pipewire/wireplumber#150, glfo#pipewire/wireplumber#151,
glfo#pipewire/wireplumber#153)
* Fixed a regression in 0.4.6 that caused the echo-cancellation
pipewire module (and possibly others) to not work
* A default sink or source is now not selected if there is no
available route for it (glfo#pipewire/wireplumber#145)
* Fixed an issue where some clients would wait for a bit while
seeking (glfo#pipewire/wireplumber#146)
* Fixed audio capture in the endpoints-based policy
* Fixed an issue that would cause certain lua scripts to error
out with older configuration files
(glfo#pipewire/wireplumber#158)
- Drop patches already included upstream:
* 0001-policy-node-schedule-rescan-without-timeout-if-defined-target-is-not-found.patch
* 0002-policy-node-find-best-linkable-if-default-one-cannot-be-linked.patch
OBS-URL: https://build.opensuse.org/request/show/946064
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=19
- Reformat .changes file to limit lines to 67 chars when possible.
* Fix briefly switching output to a secondary device when
switching device profiles (#85)
* Scripts are now also looked up in
$XDG_CONFIG_HOME/wireplumber/scripts
* Add support for using strings as log level selectors in
WIREPLUMBER_DEBUG.
- Drop patches merged upstream:
* 0001-m-reserve-device-replace-the-hash-table-key-on-new-insert.patch
* 0002-policy-node-wait-for-nodes-when-we-become-unlinked.patch
- Add patch from upstream to fix a pulse client hanging issue:
* 0001-policy-node-schedule-rescan-without-timeout-if-defined-target-is-not-found.patch
- Add patch from upstream to fix an issue with
libpipewire-module-echo-cancel:
* 0002-policy-node-find-best-linkable-if-default-one-cannot-be-linked.patch
OBS-URL: https://build.opensuse.org/request/show/945249
OBS-URL: https://build.opensuse.org/package/show/multimedia:libs/wireplumber?expand=0&rev=18
