SHA256
1
0
forked from pool/zlib

Accepting request 830216 from devel:libraries:c_c++

- Add patch to fix compression level switching
  bsc#1175811 bsc#1175830 bsc#1175831
  * zlib-compression-switching.patch

- Set -DDFLTCC_LEVEL_MASK=0x7e on s390/s390x jsc#13776

OBS-URL: https://build.opensuse.org/request/show/830216
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/zlib?expand=0&rev=78
This commit is contained in:
Dominique Leuenberger 2020-08-31 14:47:31 +00:00 committed by Git OBS Bridge
commit 6a683a888f
3 changed files with 203 additions and 1 deletions

View File

@ -0,0 +1,184 @@
Index: zlib-1.2.11/configure
===================================================================
--- zlib-1.2.11.orig/configure
+++ zlib-1.2.11/configure
@@ -923,7 +923,7 @@ cat > $test.c << EOF
#include <sys/sdt.h>
int main() { return 0; }
EOF
-if try ${CC} ${CFLAGS} $test.c; then
+if try $CC -c $CFLAGS $test.c; then
echo "Checking for sys/sdt.h ... Yes." | tee -a configure.log
CFLAGS="$CFLAGS -DHAVE_SYS_SDT_H"
SFLAGS="$SFLAGS -DHAVE_SYS_SDT_H"
Index: zlib-1.2.11/contrib/s390/dfltcc.c
===================================================================
--- zlib-1.2.11.orig/contrib/s390/dfltcc.c
+++ zlib-1.2.11/contrib/s390/dfltcc.c
@@ -350,8 +350,12 @@ int ZLIB_INTERNAL dfltcc_deflate(strm, f
int soft_bcc;
int no_flush;
- if (!dfltcc_can_deflate(strm))
+ if (!dfltcc_can_deflate(strm)) {
+ /* Clear history. */
+ if (flush == Z_FULL_FLUSH)
+ param->hl = 0;
return 0;
+ }
again:
masked_avail_in = 0;
@@ -376,7 +380,8 @@ again:
/* Clear history. */
if (flush == Z_FULL_FLUSH)
param->hl = 0;
- *result = need_more;
+ /* Trigger block post-processing if necessary. */
+ *result = no_flush ? need_more : block_done;
return 1;
}
@@ -403,13 +408,18 @@ again:
param->bcf = 0;
dfltcc_state->block_threshold =
strm->total_in + dfltcc_state->block_size;
- if (strm->avail_out == 0) {
- *result = need_more;
- return 1;
- }
}
}
+ /* No space for compressed data. If we proceed, dfltcc_cmpr() will return
+ * DFLTCC_CC_OP1_TOO_SHORT without buffering header bits, but we will still
+ * set BCF=1, which is wrong. Avoid complications and return early.
+ */
+ if (strm->avail_out == 0) {
+ *result = need_more;
+ return 1;
+ }
+
/* The caller gave us too much data. Pass only one block worth of
* uncompressed data to DFLTCC and mask the rest, so that on the next
* iteration we start a new block.
@@ -679,10 +689,15 @@ local inline int is_dfltcc_enabled(void)
* compiling with -m31, gcc defaults to ESA mode, however, since the kernel
* is 64-bit, it's always z/Architecture mode at runtime.
*/
- __asm__ volatile(".machinemode push\n"
+ __asm__ volatile(
+#ifndef __clang__
+ ".machinemode push\n"
".machinemode zarch\n"
+#endif
"stfle %[facilities]\n"
+#ifndef __clang__
".machinemode pop\n"
+#endif
: [facilities] "=Q" (facilities)
, [r0] "+r" (r0)
:
@@ -835,6 +850,28 @@ int ZLIB_INTERNAL dfltcc_deflate_params(
return Z_OK;
}
+int ZLIB_INTERNAL dfltcc_deflate_done(strm, flush)
+ z_streamp strm;
+ int flush;
+{
+ deflate_state FAR *state = (deflate_state FAR *)strm->state;
+ struct dfltcc_state FAR *dfltcc_state = GET_DFLTCC_STATE(state);
+ struct dfltcc_param_v0 FAR *param = &dfltcc_state->param;
+
+ /* When deflate(Z_FULL_FLUSH) is called with small avail_out, it might
+ * close the block without resetting the compression state. Detect this
+ * situation and return that deflation is not done.
+ */
+ if (flush == Z_FULL_FLUSH && strm->avail_out == 0)
+ return 0;
+
+ /* Return that deflation is not done if DFLTCC is used and either it
+ * buffered some data (Continuation Flag is set), or has not written EOBS
+ * yet (Block-Continuation Flag is set).
+ */
+ return !dfltcc_can_deflate(strm) || (!param->cf && !param->bcf);
+}
+
/*
Preloading history.
*/
@@ -888,6 +925,7 @@ int ZLIB_INTERNAL dfltcc_deflate_set_dic
append_history(param, state->window, dictionary, dict_length);
state->strstart = 1; /* Add FDICT to zlib header */
+ state->block_start = state->strstart; /* Make deflate_stored happy */
return Z_OK;
}
Index: zlib-1.2.11/contrib/s390/dfltcc_deflate.h
===================================================================
--- zlib-1.2.11.orig/contrib/s390/dfltcc_deflate.h
+++ zlib-1.2.11/contrib/s390/dfltcc_deflate.h
@@ -11,6 +11,7 @@ int ZLIB_INTERNAL dfltcc_deflate_params
int level,
int strategy,
int *flush));
+int ZLIB_INTERNAL dfltcc_deflate_done OF((z_streamp strm, int flush));
int ZLIB_INTERNAL dfltcc_deflate_set_dictionary OF((z_streamp strm,
const Bytef *dictionary,
uInt dict_length));
@@ -41,6 +42,7 @@ int ZLIB_INTERNAL dfltcc_deflate_get_dic
if (err == Z_STREAM_ERROR) \
return err; \
} while (0)
+#define DEFLATE_DONE dfltcc_deflate_done
#define DEFLATE_BOUND_ADJUST_COMPLEN(strm, complen, source_len) \
do { \
if (dfltcc_can_deflate((strm))) \
Index: zlib-1.2.11/deflate.c
===================================================================
--- zlib-1.2.11.orig/deflate.c
+++ zlib-1.2.11/deflate.c
@@ -75,6 +75,7 @@ const char deflate_copyright[] =
#define DEFLATE_GET_DICTIONARY_HOOK(strm, dict, dict_len) do {} while (0)
#define DEFLATE_RESET_KEEP_HOOK(strm) do {} while (0)
#define DEFLATE_PARAMS_HOOK(strm, level, strategy, hook_flush) do {} while (0)
+#define DEFLATE_DONE(strm, flush) 1
#define DEFLATE_BOUND_ADJUST_COMPLEN(strm, complen, sourceLen) do {} while (0)
#define DEFLATE_NEED_CONSERVATIVE_BOUND(strm) 0
#define DEFLATE_HOOK(strm, flush, bstate) 0
@@ -600,14 +601,15 @@ int ZEXPORT deflateParams(strm, level, s
DEFLATE_PARAMS_HOOK(strm, level, strategy, &hook_flush);
func = configuration_table[s->level].func;
- if ((strategy != s->strategy || func != configuration_table[level].func ||
- hook_flush != Z_NO_FLUSH) && s->last_flush != -2) {
+ if (((strategy != s->strategy || func != configuration_table[level].func) &&
+ s->last_flush != -2) || hook_flush != Z_NO_FLUSH) {
/* Flush the last buffer: */
- int err = deflate(strm, RANK(hook_flush) > RANK(Z_BLOCK) ?
- hook_flush : Z_BLOCK);
+ int flush = RANK(hook_flush) > RANK(Z_BLOCK) ? hook_flush : Z_BLOCK;
+ int err = deflate(strm, flush);
if (err == Z_STREAM_ERROR)
return err;
- if (strm->avail_in || (s->strstart - s->block_start) + s->lookahead)
+ if (strm->avail_in || (s->strstart - s->block_start) + s->lookahead ||
+ !DEFLATE_DONE(strm, flush))
return Z_BUF_ERROR;
}
if (s->level != level) {
Index: zlib-1.2.11/test/infcover.c
===================================================================
--- zlib-1.2.11.orig/test/infcover.c
+++ zlib-1.2.11/test/infcover.c
@@ -373,7 +373,7 @@ local void cover_support(void)
mem_setup(&strm);
strm.avail_in = 0;
strm.next_in = Z_NULL;
- ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream));
+ ret = inflateInit_(&strm, &ZLIB_VERSION[1], (int)sizeof(z_stream));
assert(ret == Z_VERSION_ERROR);
mem_done(&strm, "wrong version");

View File

@ -1,3 +1,15 @@
-------------------------------------------------------------------
Fri Aug 28 07:58:23 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>
- Add patch to fix compression level switching
bsc#1175811 bsc#1175830 bsc#1175831
* zlib-compression-switching.patch
-------------------------------------------------------------------
Thu Aug 27 06:55:29 UTC 2020 - Tomáš Chvátal <tchvatal@suse.com>
- Set -DDFLTCC_LEVEL_MASK=0x7e on s390/s390x jsc#13776
-------------------------------------------------------------------
Thu Aug 6 08:36:48 UTC 2020 - Lidong Zhong <lidong.zhong@suse.com>

View File

@ -43,6 +43,7 @@ Patch4: 410.patch
Patch5: zlib-no-version-check.patch
Patch6: bsc1174736-DFLTCC_LEVEL_MASK-set-to-0x1ff.patch
Patch7: bsc1174551-fxi-imcomplete-raw-streams.patch
Patch8: zlib-compression-switching.patch
BuildRequires: autoconf
BuildRequires: automake
BuildRequires: libtool
@ -126,12 +127,17 @@ developing applications which use minizip.
%patch5 -p1
%patch6 -p1
%patch7 -p1
%patch8 -p1
cp %{SOURCE4} .
%build
%global _lto_cflags %{_lto_cflags} -ffat-lto-objects
export LDFLAGS="-Wl,-z,relro,-z,now"
export CFLAGS="%{optflags}"
%ifarch s390x s390
export CFLAGS="%{optflags} -DDFLTCC_LEVEL_MASK=0x7e"
%else
export CFLAGS="%{optflags}"
%endif
# For sure not autotools build
CC="cc" ./configure \
--shared \