After 'Machine as QOM' series the machine type input triggers
the creation of the machine class.
If the machine type is set in the configuration file, the machine
class is not updated accordingly and remains the default.
Fixed that by querying the machine options after the configuration
file is loaded.
Cc: qemu-stable@nongnu.org
Reported-by: William Dauchy <william@gandi.net>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 364c3e6b8d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
spapr_tce_table_finalize() can SEGV if the object was not previously
realized. In particular this can be triggered by running
qemu-system-ppc -device spapr-tce-table,?
The basic problem is that we have mismatched initialization versus
finalization: spapr_tce_table_finalize() is attempting to undo things that
are done in spapr_tce_table_realize(), not an instance_init function.
Therefore, replace spapr_tce_table_finalize() with
spapr_tce_table_unrealize().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 5f9490de56)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Because of wrong return value of .save_live_pending() in
migration/block.c, migration finishes before the whole disk is
transferred. Such situation occurs when the migration process is fast
enough, for example when source and dest are on the same host.
If in the bulk phase we return something < max_size, we will skip
transferring the tail of the device. Currently we have "set pending to
BLOCK_SIZE if it is zero" for bulk phase, but there no guarantee, that
it will be < max_size.
True approach is to return, for example, max_size+1 when we are in the
bulk phase.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
Message-id: 1419933856-4018-2-git-send-email-vsementsov@parallels.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 04636dc410)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If QEMU is started with -numa ... Windows only notices that
CPU has been hot-added but it will not online such CPUs.
It's caused by the fact that possible CPUs are flagged as
not enabled in SRAT and Windows honoring that information
doesn't use corresponding CPU.
ACPI 5.0 Spec regarding to flag says:
"
Table 5-47 Local APIC Flags
...
Enabled: if zero, this processor is unusable, and the operating system
support will not attempt to use it.
"
Fix QEMU to adhere to spec and mark possible CPUs as enabled
in SRAT.
With that Windows onlines hot-added CPUs as expected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit dd0247e09a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If TB ends with an opcode that crosses page boundary and the following
page is not executable then EPC1 for the code fetch exception wrongly
points at the beginning of the TB. Always treat instruction that crosses
page boundary as a separate TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 01673a3401)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When stopping an audio voice, call the audio backend's fini
method before calling audio_pcm_hw_free_resources_ rather than
afterwards. This allows backends which use helper threads (like
pulseaudio) to terminate those threads before the conv_buf or
mix_buf are freed and avoids race conditions where the helper
may access a NULL pointer or freed memory.
Cc: qemu-stable@nongnu.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418406239-9838-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit b28fb27b5e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Old kernels that used high memory only allowed the initrd to be in the
first 896MB of memory. If you load the initrd above, they complain
that "initrd extends beyond end of memory".
In order to fix this, while not breaking machines with small amounts
of memory fixed by cdebec5 (linuxboot: compute initrd loading address,
2014-10-06), we need to distinguish two cases. If pc.c placed the
initrd at end of memory, use the new algorithm based on the e801
memory map. If instead pc.c placed the initrd at the maximum address
specified by the bzImage, leave it there.
The only interesting part is that the low-memory info block is now
loaded very early, in real mode, and thus the 32-bit address has
to be converted into a real mode segment. The initrd address is
also patched in the info block before entering real mode, it is
simpler that way.
This fixes booting the RHEL4.8 32-bit installation image with 1GB
of RAM.
Cc: qemu-stable@nongnu.org
Cc: mst@redhat.com
Cc: jsnow@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 269e235849)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Even though hw/i386/pc.c tries to compute a valid loading address for the
initrd, close to the top of RAM, this does not take into account other
data that is malloced into that memory by SeaBIOS.
Luckily we can easily look at the memory map to find out how much memory is
used up there. This patch places the initrd in the first four gigabytes,
below the first hole (as returned by INT 15h, AX=e801h).
Without this patch:
[ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[ 0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff]
With this patch:
[ 0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[ 0.000000] RAMDISK: [mem 0x07112000-0x07fdffff]
So linuxboot is able to use the 64k that were added as padding for
QEMU <= 2.1.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit cdebec5e40)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c5f6e493bb)
Conflicts:
tests/qemu-iotests/group
*removed context from upstream iotest groups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3b5e14c76a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 9e52c53b8c)
*included to maintain parity with unit tests which inject errors
via blkdebug. needed for:
"qcow2: Flushing the caches in qcow2_close may fail"
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In qcow2_alloc_cluster_offset(), *num is limited to
INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is
of type uint64_t, we might as well cast *num to that type before
performing the shift.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 11c89769dc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2247798d13)
Conflicts:
tests/qemu-iotests/group
*removed context dependencies from upstream iotest groups
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f798068c56)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b2439d26f0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f75613cf24)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL in bdrv_img_create(), which is important so that
the create_opts pointer in that function is not NULL after the
qemu_opts_append() calls and when going into qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit c614972408)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.
A way to test this issue is the following:
$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M
Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit fd752801ae)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ef8104378c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5f535a941e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The code in invalidate_and_set_dirty() needs to handle addr/length
combinations which cross guest physical page boundaries. This can happen,
for example, when disk I/O reads large blocks into guest RAM which previously
held code that we have cached translations for. Unfortunately we were only
checking the clean/dirty status of the first page in the range, and then
were calling a tb_invalidate function which only handles ranges that don't
cross page boundaries. Fix the function to deal with multipage ranges.
The symptoms of this bug were that guest code would misbehave (eg segfault),
in particular after a guest reboot but potentially any time the guest
reused a page of its physical RAM for new code.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1416167061-13203-1-git-send-email-peter.maydell@linaro.org
(cherry picked from commit f874bf905f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Old BIOSes left some padding by mistake after the req_size/resp_size.
New QEMU does not like it, thinking it is a bidirectional command.
As a workaround, we can check if the ANY_LAYOUT bit is set; if not, we
always consider the first buffer as the virtio-scsi request/response,
because, back when QEMU did not support ANY_LAYOUT, it expected the
payload to start at the second element of the iovec.
This can show up during migration.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 55783a5521)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Memory slots have to be page aligned to get entered into KVM. There
is existing logic that tries to ensure that we pad memory slots that
are not page aligned to the biggest region that would still fit in the
alignment requirements.
Unfortunately, that logic is broken. It tries to calculate the start
offset based on the region size.
Fix up the logic to do the thing it was intended to do and document it
properly in the comment above it.
With this patch applied, I can successfully run an e500 guest with more
than 3GB RAM (at which point RAM starts overlapping subpage memory regions).
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit f2a64032a1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Entry opcode needs to check if moving to new register frame would cause
register window overflow. Entry used in function prologue never
overflows because preceding windowed call* opcode writes return address
to the target register window frame, causing overflow exceptions at the
point of call. But when a sequence of entry opcodes is used for register
window spilling there may not be a call or other opcode that would cause
window check between entries and they would not raise overflow exception
themselves resulting in data corruption.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 1b3e71f8ee)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A linux guest will be issuing messages:
[ 32.124042] DC390: Deadlock in DataIn_0: DMA aborted unfinished: 000000 bytes remain!!
[ 32.126348] DC390: DataIn_0: DMA State: 0
and the HBA will fail to work properly.
Reason is the emulation is not setting the 'DMA transfer done'
status correctly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c3543fb5fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit f8833a37c0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If there are still pending i/o while deleting snapshot,
because deleting snapshot is done in non-coroutine context, and
the pending i/o read/write (bdrv_co_do_rw) is done in coroutine context,
so it's possible to cause concurrency problem between above two operations.
Add bdrv_drain_all() to bdrv_snapshot_delete() to avoid this problem.
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 201410211637596311287@sangfor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3432a1929e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
U-boot for xtensa always treats uImage load address as virtual address.
This is important when booting uImage on xtensa core with MMUv2, because
MMUv2 has fixed non-identity virtual-to-physical mapping after reset.
Always do virtual-to-physical translation of uImage load address and
load uImage at the translated address. This fixes booting uImage kernels
on dc232b and other MMUv2 cores.
Cc: qemu-stable@nongnu.org
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 6d2e453053)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 25bda50a0c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 0a2923f848)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.
To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.
This is CVE-2014-7815.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
[ kraxel: apply codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6908bfe8e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu_shutdown_requested may be interrupted by qemu_system_killed. If the
latter sets shutdown_requested after qemu_shutdown_requested has read it
but before it was cleared, the shutdown event is lost. Fix this by using
atomic_xchg.
This provides a different fix for the problem which commit 15124e142
attempts to deal with. That commit breaks use of ^C to drop into gdb,
and so this approach is better (and 15124e142 can be reverted).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 817ef04db2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit 57f97834ef cleaned up
the cac_applet_pki_process_apdu function to have a single
exit point. Unfortunately, that commit introduced a bug
where the sign buffer can get free'd and nullified while
it's still being used.
This commit corrects the bug by introducing a boolean to
track whether or not the sign buffer should be freed in
the function exit path.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Alon Levy <alon@pobox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 81b49e8f89)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
While writing an L1 table sector, qcow2_write_l1_entry() copies the
respective range from s->l1_table to the local "buf" array. The size of
s->l1_table does not have to be a multiple of L1_ENTRIES_PER_SECTOR;
thus, limit the index which is used for copying all entries to the L1
size.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1391444fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Switch vmsvga_update_rect over to use vmsvga_verify_rect. Slight change
in behavior: We don't try to automatically fixup rectangles any more.
In case we find invalid update requests we'll do a full-screen update
instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
(cherry picked from commit 1735fe1edb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Quick & easy stopgap for CVE-2014-3689: We just compile out the
hardware acceleration functions which lack sanity checks. Thankfully
we have capability bits for them (SVGA_CAP_RECT_COPY and
SVGA_CAP_RECT_FILL), so guests should deal just fine, in theory.
Subsequent patches will add the missing checks and re-enable the
hardware acceleration emulation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
(cherry picked from commit 83afa38eb2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We used to be able to address both the QEMU and the KVM APIC via "apic".
This doesn't work anymore. So we need to use their parent class to turn
off the vapic on machines that should not expose them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit df1fd4b541)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is
dropped again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon
unplug the virtio-9p child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8f3d60e568)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-9p-pci all duplicate the qdev properties of their
V9fsState child. This approach does not work well with
string or pointer properties since we must be careful
about leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
V9fsState child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 48833071d9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-balloon child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 91ba212088)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-rng child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 352fa88dfb)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-rng-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIORNG child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIORNG child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8ee486ae33)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-serial child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e77ca8b92a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-serial-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSerial child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSerial child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4f456d8025)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-scsi/vhost-scsi child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1312f12bcc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSCSI/VHostSCSI child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSCSI/VHostSCSI child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit c39343fd81)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-net child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6a0c6b5978)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the
qdev properties of their VirtIONet child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIONet child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7779edfeb1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU currently allows the number of VCPUs to not be a multiple of the
number of threads per socket, but the smbios socket count calculation
introduced by commit c97294ec1b doesn't
take that into account, triggering an assertion. e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 -smp 4,sockets=2,cores=6,threads=1
qemu-system-x86_64: /home/ehabkost/rh/proj/virt/qemu/hw/i386/smbios.c:825: smbios_get_tables: Assertion `smbios_smp_sockets >= 1' failed.
Aborted (core dumped)
Socket count calculation doesn't belong to smbios.c and should
eventually be moved to the main SMP topology configuration code. But
while we don't move the code, at least make it correct by rounding up
the division.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: qemu-stable@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 7dfddd7f88)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since 3687d532 we've been unconditionally adding qom-test to our qtests
for every arch. However, some archs inherit their tests from Makefile
variables for other archs, such as i386/x86_64,
microblaze/microblazeel, and xtensa/xtensaeb. Since these are evaluated
in a lazy manner, we ultimately end up adding qom-test twice.
In the case x86_64, where we have a large number of machine types that
we rerun qom-test for, this has lead to a fairly noticeable increase
in the overall run-time of `make check` (78s vs. 42s on my machine).
Similar speed-ups are visible for other such archs, but not nearly as
significant.
Fix this by only adding qom-test to an arch's test list if it's not
already present.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 2b8419cb49)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It should not break memory hotplug feature if there is non-NUMA option.
This patch would also allow to use pc-dimm as replacement for initial memory
for non-NUMA configs.
Note: After this patch, the memory hotplug can work normally for Linux guest OS
when there is non-NUMA option and NUMA option. But not support Windows guest OS
to hotplug memory with no-NUMA config, actully, it's Windows limitation.
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit fc50ff0666)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Header length check should happen only if backend is kernel. For user
backend there is no reason to reset this bit.
vhost-user code does not define .has_vnet_hdr_len so
VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides
support it.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d8e80ae37a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a QMP client changes the polling interval time by setting
the guest-stats-polling-interval property, the interval value
is stored and manipulated as an int64_t variable.
However, the balloon_stats_change_timer() function, which is
used to set the actual timer with the interval value, takes
an int instead, causing an overflow for big interval values.
This commit fix this bug by changing balloon_stats_change_timer()
to take an int64_t and also it limits the polling interval value
to UINT_MAX to avoid other kinds of overflow.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 1f9296b51a)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit cdaa86a54 ("Add G_IO_HUP handler for socket chardev") exposed a bug in
the way the HMP monitor handles its command buffer. When a client closes the
connection to the monitor, tcp_chr_read() will detect the G_IO_HUP condition
and call tcp_chr_disconnect() to close the server-side connection too. Due to
the fact that monitor reads 1 byte at a time (for each tcp_chr_read()), the
monitor readline state / buffers might contain junk (i.e. a half-finished
command). Thus, without calling readline_restart() on mon->rs in
CHR_EVENT_OPEN, future HMP commands will fail.
Signed-off-by: Stratos Psomadakis <psomas@grnet.gr>
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit e5554e2015)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is more of an exercise of the dealloc visitor, where it may
erroneously use an uninitialized discriminator field as indication
that union fields corresponding to that discriminator field/type are
present, which can lead to attempts to free random chunks of heap
memory.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit cb55111b4e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In some cases an input visitor might bail out on filling out a
struct for various reasons, such as missing fields when running
in strict mode. In the case of a QAPI Union type, this may lead
to cases where the .kind field which encodes the union type
is uninitialized. Subsequently, other visitors, such as the
dealloc visitor, may use this .kind value as if it were
initialized, leading to assumptions about the union type which
in this case may lead to segfaults. For example, freeing an
integer value.
However, we can generally rely on the fact that the always-present
.data void * field that we generate for these union types will
always be NULL in cases where .kind is uninitialized (at least,
there shouldn't be a reason where we'd do this purposefully).
So pass this information on to Visitor implementation via these
optional start_union/end_union interfaces so this information
can be used to guard against the situation above. We will make
use of this information in a subsequent patch for the dealloc
visitor.
Cc: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(cherry picked from commit cee2dedb85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch initializes monitor for gdbstub with the qemu_chr_alloc function
instead of just allocating the memory. Initialization function call
is required, because it also creates chr_write_lock mutex, which is used
when writing to this character device.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 462efe9e53)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 8c46f7ec85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit cc943c36fa
pci: Use bus master address space for delivering MSI/MSI-X messages
breaks virtio-net for rhel6.[56] x86 guests because they don't
enable bus mastering for virtio PCI devices. For the same reason,
rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore.
Old guests forgot to enable bus mastering, enable it automatically on
DRIVER (guests use some devices before DRIVER_OK).
Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit e43c0b2ea5)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The spec says (and real HW confirms this) that, if the bus master bit
is 0, the device will not generate any PCI accesses. MSI and MSI-X
messages fall among these, so we should use the corresponding address
space to deliver them. This will prevent delivery if bus master support
is disabled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit cc943c36fa)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When we migrate we ask the kernel about its current belief on what the guest
time would be. However, I've seen cases where the kvmclock guest structure
indicates a time more recent than the kvm returned time.
To make sure we never go backwards, calculate what the guest would have seen as time at the point of migration and use that value instead of the kernel returned one when it's more recent.
This bases the view of the kvmclock after migration on the
same foundation in host as well as guest.
Signed-off-by: Alexander Graf <agraf@suse.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9a48bcd1b8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add back the PCIe config capabilities on XHCI cards in non-PCIe slots,
but only for machine types before 2.1.
This fixes a migration incompatibility in the XHCI PCI devices
caused by:
058fdcf52c - xhci: add endpoint cap on express bus only
Note that in fixing it for compatibility with older QEMUs, it breaks
compatibility with existing QEMU 2.1's on older machine types.
The status before this patch was (if it used an XHCI adapter):
machine type | source qemu
any pre-2.1 - FAIL
any 2.1... - PASS
With this patch:
machine type | source qemu
any pre-2.1 - PASS
pre-2.1 2.1... - FAIL
2.1 2.1... - PASS
A test to trigger it is to add '-device nec-usb-xhci,id=xhci,addr=0x12'
to the command line.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6043e92c2)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If memory allocation fails when using the -mem-prealloc command-line
option, QEMU exits without printing any error information to
the user:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
# echo $?
1
This commit adds an error message, so that we print instead:
# qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
qemu: unable to map backing store for hugepages: Cannot allocate memory
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit e4d9df4fb1)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At present, this function doesn't have partial cleanup implemented,
which will cause resource leaks in some scenarios.
Example:
1. Assume that "dc->realize(dev, &local_err)" executes successful
and local_err == NULL;
2. device hotplug in hotplug_handler_plug() executes but fails
(it is prone to occur). Then local_err != NULL;
3. error_propagate(errp, local_err) and return. But the resources
which have been allocated in dc->realize() will be leaked.
Simple backtrace:
dc->realize()
|->device_realize
|->pci_qdev_init()
|->do_pci_register_device()
|->etc.
Add fuller cleanup logic which assures that function can
goto appropriate error label as local_err population is
detected at each relevant point.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 1d45a705fc)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Forcefully unrealize all children regardless of errors in earlier
iterations (if any). We should keep going with cleanup operation
rather than report an error immediately. Therefore store the first
child unrealization failure and propagate it at the end. We also
forcefully unregister vmsd and unrealize actual object, too.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit cd4520adca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since QEMU 2.1, we are allocating more space for ACPI tables, so no
space is left after initrd for the BIOS to allocate memory.
Besides ACPI tables, there are a few other uses of high memory in
SeaBIOS: SMBIOS tables and USB drivers use it in particular. These uses
allocate a very small amount of memory. Malloc metadata also lives
there. So we need _some_ extra padding there to avoid initrd breakage,
but not much.
John Snow found a case where RHEL5 was broken by the recent change to
ACPI_TABLE_SIZE; in his case 4KB of extra padding are fine, but just to
be safe I am adding 32KB, which is roughly the same amount of padding
that was left by QEMU 2.0 and earlier.
Move initrd to leave some space for the BIOS.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 438f92ee9f)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.
In the future, we might be able to drop checking vm_running
completely, and check vm state directly.
Reported-by: Dietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9e8e8c4865)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On vm stop, vm_running state set to stopped
before device is notified, so callbacks can get envoked with
vm_running = false; and this is not an error.
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 131c5221fe)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch is predicated on cc943c, which was dropped from
stable tree for other reasons.
This reverts commit 0824ca6bd1.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.
Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 4d1b279b06)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch adds a subsection with exception_index field to the VMState for
correct saving the CPU state.
Without this patch, simulator could miss the pending exception in the saved
virtual machine state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 6c3bff0ed8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit cf7330c759)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Related spice-only bug. We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card. It's also used with qxl in vga mode.
When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer. In theory the guest can write,
indirectly via spice-server. The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.
Fix that by switching to dynamic allocation for the buffer.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit ab9509ccea)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Plug a bunch of holes in the bochs dispi interface parameter checking.
Add a function doing verification on all registers. Call that
unconditionally on every register write. That way we should catch
everything, even changing one register affecting the valid range of
another register.
Some of the holes have been added by commit
e9c6149f6a. Before that commit the
maximum possible framebuffer (VBE_DISPI_MAX_XRES * VBE_DISPI_MAX_YRES *
32 bpp) has been smaller than the qemu vga memory (8MB) and the checking
for VBE_DISPI_MAX_XRES + VBE_DISPI_MAX_YRES + VBE_DISPI_MAX_BPP was ok.
Some of the holes have been there forever, such as
VBE_DISPI_INDEX_X_OFFSET and VBE_DISPI_INDEX_Y_OFFSET register writes
lacking any verification.
Security impact:
(1) Guest can make the ui (gtk/vnc/...) use memory rages outside the vga
frame buffer as source -> host memory leak. Memory isn't leaked to
the guest but to the vnc client though.
(2) Qemu will segfault in case the memory range happens to include
unmapped areas -> Guest can DoS itself.
The guest can not modify host memory, so I don't think this can be used
by the guest to escape.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit c1b886c45d)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
VgaState->vram_size is the size of the pci bar. In case of qxl not the
whole pci bar can be used as vga framebuffer. Add a new variable
vbe_size to handle that case. By default (if unset) it equals
vram_size, but qxl can set vbe_size to something else.
This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results
and sanity checks are done with the correct size too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 54a85d4624)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
whenever we start vhost, virtio could have outstanding packets
queued, when they complete later we'll modify the ring
while vhost is processing it.
To prevent this, purge outstanding packets on vhost start.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 086abc1ccd)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
devices rely on packet callbacks eventually running,
but we violate this rule whenever we purge the queue.
To fix, invoke callbacks on all packets on purge.
Set length to 0, this way callers can detect that
this happened and re-queue if necessary.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 07d8084624)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.
If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.
To avoid this, we forbid receiving packets in generic net code when
VM is not running.
Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e1d64c084b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If we start Windows 2008 R2 DataCenter with number of cpu less than 8,
The system will use APIC Flat Logical destination mode as default configuration,
Which has an upper limit of 8 CPUs.
The fault is that VM can not show all processors within Task Manager if
we hot-add cpus when the number of cpus in VM extends the limit of 8.
If we use cluster destination model, the problem will be solved.
Note:
This flag was introduced later than ACPI v1.0 specification while QEMU
generates v1.0 tables only, but...
linux kernel ignores this flag, so patch has no influence on it.
Tested with Win[XPsp3|Srv2003EE|Srv2008DC|Srv2008R2|Srv2012R2], there
isn't BSODs and guests boot just fine. In cases guest doesn't support
cpu-hotplug, cpu becomes visible after reboot and in case the guest
supports cpu-hotplug, it works as expected with this patch.
Cc: qemu-stable@nongnu.org
Signed-off-by: huangzhichao <huangzhichao@huawei.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
(cherry picked from commit 07b81ed937)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As vhost core can use backend_features during init, clear it earlier to
avoid using uninitialized memory.
This use would be harmless since vhost scsi ignores the result
anyway, but initializing earlier will help prevent valgrind errors,
and make scsi and net behave similarly.
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 3a1655fc53)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit a9f98bb5eb "vhost: multiqueue
support" changed the order of stopping the device. Previously
vhost_dev_stop would disable backend and only afterwards, unset guest
notifiers. We now unset guest notifiers while vhost is still
active. This can lose interrupts causing guest networking to fail. In
particular, this has been observed during migration.
To fix this, several other changes are needed:
- remove the hdev->started assertion in vhost.c since we may want to
start the guest notifiers before vhost starts and stop the guest
notifiers after vhost is stopped.
- introduce the vhost_net_set_vq_index() and call it before setting
guest notifiers. This is to guarantee vhost_net has the correct
virtqueue index when setting guest notifiers.
MST: fix up error handling.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>
Reported-by: "Zhangjie (HZ)" <zhangjie14@huawei.com>
Tested-by: William Dauchy <william@gandi.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit cd7d1d26b0)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit 783e770693
virtio-net: stop/start bh when appropriate
is incomplete: BH might execute within the same main loop iteration but
after vmstop, so in theory, we might trigger an assertion.
I was unable to reproduce this in practice,
but it seems clear enough that the potential is there, so worth fixing.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit e8bcf84200)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 2c7ffc414 added support for honouring the CPACR coprocessor
access control register bits which may disable access to VFP
and Neon instructions. However it failed to account for the
fact that the CPACR is only present starting from the ARMv6
architecture version, so it accidentally disabled VFP completely
for ARMv5 CPUs like the ARM926. Linux would detect this as
"no VFP present" and probably fall back to its own emulation,
but other guest OSes might crash or misbehave.
This fixes bug LP:1359930.
Reported-by: Jakub Jermar <jakub@jermar.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1408714940-7192-1-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit ed1f13d607)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The SDM specifies (June 2014 Vol3 11.11.5):
On a hardware reset, the P6 and more recent processors clear the
valid flags in variable-range MTRRs and clear the E flag in the
IA32_MTRR_DEF_TYPE MSR to disable all MTRRs. All other bits in the
MTRRs are undefined.
We currently do none of that, so whatever MTRR settings you had prior
to reset is what you have after reset. Usually this doesn't matter
because KVM often ignores the guest mappings and uses write-back
anyway. However, if you have an assigned device and an IOMMU that
allows NoSnoop for that device, KVM defers to the guest memory
mappings which are now stale after reset. The result is that OVMF
rebooting on such a configuration takes a full minute to LZMA
decompress the firmware volume, a process that is nearly instant on
the initial boot.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9db2efd95e)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The MTRR state in KVM currently runs completely independent of the
QEMU state in CPUX86State.mtrr_*. This means that on migration, the
target loses MTRR state from the source. Generally that's ok though
because KVM ignores it and maps everything as write-back anyway. The
exception to this rule is when we have an assigned device and an IOMMU
that doesn't promote NoSnoop transactions from that device to be cache
coherent. In that case KVM trusts the guest mapping of memory as
configured in the MTRR.
This patch updates kvm_get|put_msrs() so that we retrieve the actual
vCPU MTRR settings and therefore keep CPUX86State synchronized for
migration. kvm_put_msrs() is also used on vCPU reset and therefore
allows future modificaitons of MTRR state at reset to be realized.
Note that the entries array used by both functions was already
slightly undersized for holding every possible MSR, so this patch
increases it beyond the 28 new entries necessary for MTRR state.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d1ae67f626)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We currently define the number of variable range MTRR registers as 8
in the CPUX86State structure and vmstate, but use MSR_MTRRcap_VCNT
(also 8) to report to guests the number available. Change this to
use MSR_MTRRcap_VCNT consistently.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d8b5c67b05)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit e8f6d00c30 ("target-i386: raise
page fault for reserved physical address bits") added a check that the
NX bit is not set on PAE PDPEs, but it also added it to rsvd_mask for
the rest of the function. This caused any PDEs or PTEs with NX set to be
erroneously rejected, making PAE guests with NX support unusable.
Signed-off-by: William Grant <wgrant@ubuntu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 1844e68eca)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QOM backends can refer to chardevs, but not vice versa. So
process -chardev and -fsdev options before -object
This fixes the rng-egd backend to virtio-rng.
Reported-by: Amos Kong <akong@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7b71758d79)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36fa has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit 8c46f7ec85)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The thread pool has a race condition if two elements complete before
thread_pool_completion_bh() runs:
If element A's callback waits for element B using aio_poll() it will
deadlock since pool->completion_bh is not marked scheduled when the
nested aio_poll() runs.
Fix this by marking the BH scheduled while thread_pool_completion_bh()
is executing. This way any nested aio_poll() loops will enter
thread_pool_completion_bh() and complete the remaining elements.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 3c80ca158c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
EventNotifier is implemented using an eventfd or pipe. It therefore
consumes file descriptors, which can be limited by rlimits and should
therefore be used sparingly.
Switch from EventNotifier to QEMUBH in thread-pool.c. Originally
EventNotifier was used because qemu_bh_schedule() was not thread-safe
yet.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit c2e50e3d11)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
commit 868270f23d
acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.
As a result, issues on boot and halt are observed.
Fix this up by doubling reserved memory for new machine types.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 927766c7d3)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.
The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 288d332202)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When running VMware ESXi under qemu-kvm the guest discards frames
that are too short. Short ARP Requests will be dropped, this prevents
guests on the same bridge as VMware ESXi from communicating. This patch
simply adds the padding on the network device itself.
Signed-off-by: Ben Draper <ben@xrsa.net>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 40a87c6c9b)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8d9eb33ca0)
Conflicts:
tests/qemu-iotests/group
*fix up context mismatches due to lack of 099 and 103 tests
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The following O_DIRECT read from a <512 byte file fails:
$ truncate -s 320 test.img
$ qemu-io -n -c 'read -P 0 0 512' test.img
qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument
Note that qemu-io completes successfully without the -n (O_DIRECT)
option.
This patch fixes qemu-iotests ./check -nocache -vmdk 059.
Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 61ed73cff4)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit d832fb4d66)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.
This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT. Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.
Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts. After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.
Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only). Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels. Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 863714ba6c)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>. To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.
However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a65c9c17ce)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When we take an exception resulting from a BRK instruction,
the architecture requires that the "preferred return address"
reported to the exception handler is the address of the BRK
itself, not the following instruction (like undefined
insns, and in contrast with SVC, HVC and SMC). Follow this,
rather than incorrectly reporting the address of the following
insn.
(We do get this correct for the A32/T32 BKPT insns.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
(cherry picked from commit 229a138d74)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The error messages before and after patch are:
before:
qemu-system-x86_64: total memory for NUMA nodes (134217728) should equal RAM size (20000000)
after:
qemu-system-x86_64: total memory for NUMA nodes (0x8000000) should equal RAM size (0x20000000)
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit c68233aee8)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If user specifies a node number that exceeds the available numa nodes in
emulated system for pc-dimm device, the device will report an invalid _PXM
to OSPM. Fix this by checking the node property value.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit cfe0ffd027)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 58ac321135 introduced a check to ide dma processing which
constrains all requests to drive size. However, apparently, some
valid requests (like TRIM) does not fit in this constraint, and
fails in 2.1. So check the range only for reads and writes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit d66168ed68)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Some non-linux systems, for example a system with
FreeBSD kernel and glibc, may declare struct mmsghdr
(in glibc) but may not have linux-specific header
file linux/ip.h. The actual implementation in qemu
includes this linux-specific header file unconditionally,
so compilation fails if it is not present. Include
this header in the configure test too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit bff6cb7296)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When new MSI-X vectors are enabled we need to disable MSI-X and
re-enable it with the correct number of vectors. That means we need
to reprogram the eventfd triggers for each vector. Prior to f4d45d47
vector->use tracked whether a vector was masked or unmasked and we
could always pick the KVM path when available for unmasked vectors.
Now vfio doesn't track mask state itself and vector->use and virq
remains configured even for masked vectors. Therefore we need to ask
the MSI-X code whether a vector is masked in order to select the
correct signaling path. As noted in the comment, MSI relies on
hardware to handle masking.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org # QEMU 2.1
(cherry picked from commit c048be5cc9)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Update -device FOO,help to include QOM properties in addition to qdev
properties. Devices are gradually adding more QOM properties that are
not reflected as qdev properties.
It is important to report all device properties since management tools
like libvirt use this information (and device-list-properties QMP) to
detect the presence of QEMU features.
This patch reuses the device-list-properties QMP machinery to avoid code
duplication.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Cole Robinson <crobinso@redhat.com>
(cherry picked from commit ef523587da)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The "hotplugged" device property was not reported before commit
f4eb32b590 ("qmp: show QOM properties in
device-list-properties"). Fix this difference.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 4115dd6527)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-08-26 16:46:01 -05:00
144 changed files with 1899 additions and 475 deletions
@@ -1160,7 +1160,9 @@ static int pty_chr_write(CharDriverState *chr, const uint8_t *buf, int len)
if(!s->connected){
/* guest sends data, check for (re-)connect */
pty_chr_update_read_handler_locked(chr);
return0;
if(!s->connected){
return0;
}
}
returnio_channel_send(s->fd,buf,len);
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.