The xkb official name for the Arabic keyboard layout is 'ara'.
However xkb has for at least the past 15 years also permitted it to
be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this
synoynm was removed, which breaks compilation of QEMU:
FAILED: pc-bios/keymaps/ar
/home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar
xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths
xkbcommon: ERROR: 1 include paths searched:
xkbcommon: ERROR: /usr/share/X11/xkb
xkbcommon: ERROR: 3 include paths could not be added:
xkbcommon: ERROR: /home/fred/.config/xkb
xkbcommon: ERROR: /home/fred/.xkb
xkbcommon: ERROR: /etc/xkb
xkbcommon: ERROR: Abandoning symbols file "(unnamed)"
xkbcommon: ERROR: Failed to compile xkb_symbols
xkbcommon: ERROR: Failed to compile keymap
The upstream xkeyboard-config change removing the compat
mapping is:
470ad2cd8f
Make QEMU always ask for the 'ara' xkb layout, which should work on
both older and newer xkeyboard-config. We leave the QEMU name for
this keyboard layout as 'ar'; it is not the only one where our name
for it deviates from the xkb standard name.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709
(cherry picked from commit 497fad3897)
Resolves: https://bugzilla.suse.com/show_bug.cgi?id=1212966
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Create separate packages for qemu-img and qemu-pr-helper.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Co-authored-by: Vasiliy Ulyanov <vulyanov@suse.de>
Since version 8.0.0, virtiofsd is not part of QEMU sources any longer.
We therefore have also moved it to a separate package. To retain
compatibility and consistency of behavior, require such a package as an
hard dependency.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
For example, let's try to avoid recommending GUI UI stuff, unless GTK is
already installed. This way we avoid things like bringing in an entire
graphic stack on servers.
References: bsc#1205680
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
- The qemu-headless subpackage was defined but never build, because it
had no files. Fix that by putting there just a simple README.
- Move the docs in a dedicated subpackage
Resolves: bsc#1209629
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
As part of the effort to close the gap with Leap I think we are fine
removing the $pkgversion component to creating a unique CONFIG_STAMP.
This stamp is only used in creating a unique symbol used in ensuring the
dynamically loaded modules correspond correctly to the loading qemu.
The default inputs to producing this unique symbol are somewhat reasonable
as a generic mechanism, but specific packaging and maintenance practices
might require the default to be modified for best use. This is an example
of that.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
We are disabling the following tests:
qemu-system-ppc64 / display-vga-test
They are failing due to some memory corruption errors. We believe that
this might be due to the combination of the compiler version and of LTO,
and will take up the investigation within the upstream community.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Executing tests in obs is very fickle, since you aren't guaranteed
reliable cpu time. Triple the timeout for each test to help ensure
we don't fail a test because the stars align against us.
Signed-off-by: Bruce Rogers <brogers@suse.com>
[DF: Small tweaks necessary for rebasing on top of 6.2.0]
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Since we have a quite restricted execution environment, as far as
networking is concerned, we need to change the error message we expect
in test 162. There is actually no routing set up so the error we get is
"Network is unreachable". Change the expected output accordingly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Revert commit "tests/qtest: enable more vhost-user tests by default"
(8dcb404bff), as it causes prooblem when building with GCC 12 and LTO
enabled.
This should be considered temporary, until the actual reason why the
code of the tests that are added in that commit breaks.
It has been reported upstream, and will be (hopefully) solved there:
https://lore.kernel.org/qemu-devel/1d3bbff9e92e7c8a24db9e140dcf3f428c2df103.camel@suse.com/
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
SG_IO may return additional status in the 'status', 'driver_status',
and 'host_status' fields. When either of these fields are set the
command has not been executed normally, so we should not continue
processing this command but rather return an error.
scsi_read_complete() already checks for these errors,
scsi_write_complete() does not.
References: bsc#1178049
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
While using SCSI passthrough, Following scenario makes qemu doesn't
realized the capacity change of remote scsi target:
1. online resize the scsi target.
2. issue 'rescan-scsi-bus.sh -s ...' in host.
3. issue 'rescan-scsi-bus.sh -s ...' in vm.
In above scenario I used to experienced errors while accessing the
additional disk space in vm. I think the reasonable operations should
be:
1. online resize the scsi target.
2. issue 'rescan-scsi-bus.sh -s ...' in host.
3. issue 'block_resize' via qmp to notify qemu.
4. issue 'rescan-scsi-bus.sh -s ...' in vm.
The errors disappear once I notify qemu by block_resize via qmp.
So this patch replaces the number of logical blocks of READ CAPACITY
response from scsi target by qemu's bs->total_sectors. If the user in
vm wants to access the additional disk space, The administrator of
host must notify qemu once resizeing the scsi target.
Bonus is that domblkinfo of libvirt can reflect the consistent capacity
information between host and vm in case of missing block_resize in qemu.
E.g:
...
<disk type='block' device='lun'>
<driver name='qemu' type='raw'/>
<source dev='/dev/sdc' index='1'/>
<backingStore/>
<target dev='sda' bus='scsi'/>
<alias name='scsi0-0-0-0'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
...
Before:
1. online resize the scsi target.
2. host:~ # rescan-scsi-bus.sh -s /dev/sdc
3. guest:~ # rescan-scsi-bus.sh -s /dev/sda
4 host:~ # virsh domblkinfo --domain $DOMAIN --human --device sda
Capacity: 4.000 GiB
Allocation: 0.000 B
Physical: 8.000 GiB
5. guest:~ # lsblk /dev/sda
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 8G 0 disk
└─sda1 8:1 0 2G 0 part
After:
1. online resize the scsi target.
2. host:~ # rescan-scsi-bus.sh -s /dev/sdc
3. guest:~ # rescan-scsi-bus.sh -s /dev/sda
4 host:~ # virsh domblkinfo --domain $DOMAIN --human --device sda
Capacity: 4.000 GiB
Allocation: 0.000 B
Physical: 8.000 GiB
5. guest:~ # lsblk /dev/sda
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 4G 0 disk
└─sda1 8:1 0 2G 0 part
References: [SUSE-JIRA] (SLE-20965)
Signed-off-by: Lin Ma <lma@suse.com>
The final step of xl migrate|save for an HVM domU is saving the state of
qemu. This also involves releasing all block devices. While releasing
backends ought to be a separate step, such functionality is not
implemented.
Unfortunately, releasing the block devices depends on the optional
'live' option. This breaks offline migration with 'virsh migrate domU
dom0' because the sending side does not release the disks, as a result
the receiving side can not properly claim write access to the disks.
As a minimal fix, remove the dependency on the 'live' option. Upstream
may fix this in a different way, like removing the newly added 'live'
parameter entirely.
Fixes: 5d6c599fe1 ("migration, xen: Fix block image lock issue on live migration")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
References: bsc#1079730, bsc#1101982, bsc#1063993
Signed-off-by: Bruce Rogers <brogers@suse.com>
Provide monitor naming of xen disks, and plumb guest driver
notification through xenstore of resizing instigated via the
monitor.
[BR: minor edits to pass qemu's checkpatch script]
[BR: significant rework needed due to upstream xen disk qdevification]
[BR: At this point, monitor_add_blk call is all we need to add!]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Add code to read the suse specific suse-diskcache-disable-flush flag out
of xenstore, and set the equivalent flag within QEMU.
Patch taken from Xen's patch queue, Olaf Hering being the original author.
[bsc#879425]
[BR: minor edits to pass qemu's checkpatch script]
[BR: With qdevification of xen-block, code has changed significantly]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Allow for guests with higher amounts of ram. The current thought
is that 2TB specified on qemu commandline would be an appropriate
limit. Note that this requires the next higher bit value since
the highest address is actually more than 2TB due to the pci
memory hole.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The DSDT needs to be updated as well, or tests will fail.
The necessary changes are the following ones:
@@ -5,13 +5,13 @@
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of /tmp/aml-ML87L1, Thu May 19 16:20:30 2022
+ * Disassembly of tests/data/acpi/microvm/DSDT.pcie, Thu May 19 16:20:30 2022
*
* Original Table Header:
* Signature "DSDT"
* Length 0x00000BCF (3023)
* Revision 0x02
- * Checksum 0xD1
+ * Checksum 0xD8
* OEM ID "BOCHS "
* OEM Table ID "BXPC "
* OEM Revision 0x00000001 (1)
@@ -1256,10 +1256,10 @@
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
0x0000000000000000, // Granularity
- 0x0000030000000000, // Range Minimum
- 0x000003FFFFFFFFFF, // Range Maximum
+ 0x000000C000000000, // Range Minimum
+ 0x000000FFFFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
- 0x0000010000000000, // Length
+ 0x0000004000000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
Name (SUPP, Zero)
We cannot, however, commit the modified binary as part of this patch,
will not apply it. The binary is instead put in the package, and copied
in place in the spec file, just before 'make check'.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
For SLES we want users to be able to use large memory configurations
with KVM without fiddling with ulimit -Sv.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[BR: add include for sys/resource.h]
Signed-off-by: Bruce Rogers <brogers@suse.com>
Change from using glib alloc and free routines to those
from libc. Also perform safety measure of dropping privs
to user if configured no-caps.
References: boo#988279
Signed-off-by: Bruce Rogers <brogers@suse.com>
[AF: Rebased for v2.7.0-rc2]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Virtio-Console can only process one character at a time. Using it on S390
gave me strange "lags" where I got the character I pressed before when
pressing one. So I typed in "abc" and only received "a", then pressed "d"
but the guest received "b" and so on.
While the stdio driver calls a poll function that just processes on its
queue in case virtio-console can't take multiple characters at once, the
muxer does not have such callbacks, so it can't empty its queue.
To work around that limitation, I introduced a new timer that only gets
active when the guest can not receive any more characters. In that case
it polls again after a while to check if the guest is now receiving input.
This patch fixes input when using -nographic on s390 for me.
[AF: Rebased for v2.7.0-rc2]
[BR: minor edits to pass qemu's checkpatch script]
Signed-off-by: Bruce Rogers <brogers@suse.com>
When using hugetlbfs (which is required for HV mode KVM on 970), we
check for MMU notifiers that on 970 can not be implemented properly.
So disable the check for mmu notifiers on PowerPC guests, making
KVM guests work there, even if possibly racy in some odd circumstances.
Signed-off-by: Bruce Rogers <brogers@suse.com>
When doing lseek, SEEK_SET indicates that the offset is an unsigned variable.
Other seek types have parameters that can be negative.
When converting from 32bit to 64bit parameters, we need to take this into
account and enable SEEK_END and SEEK_CUR to be negative, while SEEK_SET stays
absolute positioned which we need to maintain as unsigned.
Signed-off-by: Alexander Graf <agraf@suse.de>
Linux syscalls pass pointers or data length or other information of that sort
to the kernel. This is all stuff you don't want to have sign extended.
Otherwise a host 64bit variable parameter with a size parameter will extend
it to a negative number, breaking lseek for example.
Pass syscall arguments as ulong always.
Signed-off-by: Alexander Graf <agraf@suse.de>
[JRZ: changes from linux-user/qemu.h wass moved to linux-user/user-internals.h]
Signed-off-by: Jose R Ziviani <jziviani@suse.de>
[DF: Forward port, i.e., use ulong for do_prctl too]
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Fedora 17 for ARM reads /proc/cpuinfo and fails if it doesn't contain
ARM related contents. This patch implements a quick hack to expose real
/proc/cpuinfo data taken from a real world machine.
The real fix would be to generate at least the flags automatically based
on the selected CPU. Please do not submit this patch upstream until this
has happened.
Signed-off-by: Alexander Graf <agraf@suse.de>
[AF: Rebased for v1.6 and v1.7]
Signed-off-by: Andreas Färber <afaerber@suse.de>
[DF: Restructured it a bit, to make ARM look like other arch-es]
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
It's easy enough to handle either per-spec or legacy smbios structures
in the smbios file input without regard to the machine type used, by
simply applying the basic smbios formatting rules. then depending on
what is detected. terminal numm bytes are added or removed for machine
type specific processing.
References: bsc#994082, bsc#1084316, boo#1131894
Signed-off-by: Bruce Rogers <brogers@suse.com>
We add a --cross-file reference so that we can do cross compilation
of qboot from an aarch64 build.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Certain rom subpackages build from qemu git-submodules call the date
program to include date information in the packaged binaries. This
causes repeated builds of the package to be different, wkere the only
real difference is due to the fact that time build timestamp has
changed. To promote reproducible builds and avoid customers being
prompted to update packages needlessly, we'll use the timestamp of the
VERSION file as the packaging timestamp for all packages that build in a
timestamp for whatever reason.
References: bsc#1011213
Signed-off-by: Bruce Rogers <brogers@suse.com>
The sgabios submodule is no longer there, so let's get rid of any
reference to it from our spec files.
Remove no longer supported './configure' options.
We're also not set yet for using the set_version service, so we need to
update the following manually:
- the Version: tags in the spec files
- the rpm/seabios_version and rpm/skiboot_version files (see qemu.spec
for instructions on how to do that)
- the %{sbver} variable in rpm/common.inc
A better solution for handling this aspect is being worked on.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Make sure we use the branches of the submodule repositories that have
our downstream patches applied.
* roms/seabios
- [openSUSE] build: be explicit about -mx86-used-note=no
- [openSUSE] build: enable cross compilation on ARM
- [openSUSE] switch to python3 as needed
* roms/ipxe
- [openSUSE] [build] Silence GCC 12 spurious warnings
- [openSUSE] [test] help compiler out by initializing array
- [openSUSE] [build] Makefile: fix issues of build reproducibility
- [ath5k] Add missing AR5K_EEPROM_READ in ath5k_eeprom_read_turbo_modes
* roms/qboot
- [openSUSE] add cross.ini file to handle aarch64 based build
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
In an upstream tarball there are some special files, generated by a
script that is run when the archive is prepared. Let's make our
repository look a little more like that, so we can build it properly.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Stash the "packaging files" in the QEMU repository, in the rpm/
directory. During package build, they will be pulled out from there
and used as appropriate.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
There are some error paths in blk_exp_add() that jump to 'fail:' before
'exp' is even created. So we can't just unconditionally access exp->blk.
Add a NULL check, and switch from exp->blk to blk, which is available
earlier, just to be extra sure that we really cover all cases where
BlockDevOps could have been set for it (in practice, this only happens
in drv->create() today, so this part of the change isn't strictly
necessary).
Fixes: Coverity CID 1509238
Fixes: de79b52604
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a184563778)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The VirtioInfoList is already allocated by QAPI_LIST_PREPEND and
need not be allocated by the caller.
Fixes Coverity CID 1508724.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 0bfd14149b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU aborts when default RAM backend should be used (i.e. no
explicit '-machine memory-backend=' specified) but user
has created an object which 'id' equals to default RAM backend
name used by board.
$QEMU -machine pc \
-object memory-backend-ram,id=pc.ram,size=4294967296
Actual results:
QEMU 7.2.0 monitor - type 'help' for more information
(qemu) Unexpected error in object_property_try_add() at ../qom/object.c:1239:
qemu-kvm: attempt to add duplicate property 'pc.ram' to object (type 'container')
Aborted (core dumped)
Instead of abort, check for the conflicting 'id' and exit with
an error, suggesting how to remedy the issue.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2207886
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230522131717.3780533-1-imammedo@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit a37531f238)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We cannot use the generic reentrancy guard in the LSI code, so
we have to manually prevent endless reentrancy here. The problematic
lsi_execute_script() function has already a way to detect whether
too many instructions have been executed - we just have to slightly
change the logic here that it also takes into account if the function
has been called too often in a reentrant way.
The code in fuzz-lsi53c895a-test.c has been taken from an earlier
patch by Mauro Matteo Cascella.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1563
Message-Id: <20230522091011.1082574-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit b987718bbb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When the OHCI controller's framenumber is incremented, HccaPad1 register
should be set to zero (Ref OHCI Spec 4.4)
ReactOS uses hccaPad1 to determine if the OHCI hardware is running,
consequently it fails this check in current qemu master.
Signed-off-by: Ryan Wendland <wendland@live.com.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1048
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 6301460ce9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When _FORTIFY_SOURCE=2, glibc version is 2.35, and GCC version is
12.1.0, the compiler complains as follows:
In file included from /usr/include/features.h:490,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from /usr/lib/gcc/aarch64-unknown-linux-gnu/12.1.0/include/stdint.h:9,
from /home/alarm/q/var/qemu/include/qemu/osdep.h:94,
from ../util/vfio-helpers.c:13:
In function 'readlink',
inlined from 'sysfs_find_group_file' at ../util/vfio-helpers.c:116:9,
inlined from 'qemu_vfio_init_pci' at ../util/vfio-helpers.c:326:18,
inlined from 'qemu_vfio_open_pci' at ../util/vfio-helpers.c:517:9:
/usr/include/bits/unistd.h:119:10: error: argument 2 is null but the corresponding size argument 3 value is 4095 [-Werror=nonnull]
119 | return __glibc_fortify (readlink, __len, sizeof (char),
| ^~~~~~~~~~~~~~~
This error implies the allocated buffer can be NULL. Use
g_file_read_link(), which allocates buffer automatically to avoid the
error.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
(cherry picked from commit dbdea0dbfe)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
igb_receive_internal() used to check the iov length to determine
copy the iovs to a contiguous buffer, but the check is flawed in two
ways:
- It does not ensure that iovcnt > 0.
- It does not take virtio-net header into consideration.
The size of this copy is just 22 octets, which can be even less than
the code size required for checks. This (wrong) optimization is probably
not worth so just remove it. Removing this also allows igb to assume
aligned accesses for the ethernet header.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit dc9ef1bf45)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
e1000e_receive_internal() used to check the iov length to determine
copy the iovs to a contiguous buffer, but the check is flawed in two
ways:
- It does not ensure that iovcnt > 0.
- It does not take virtio-net header into consideration.
The size of this copy is just 18 octets, which can be even less than
the code size required for checks. This (wrong) optimization is probably
not worth so just remove it.
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 310a128eae)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
igb does not properly ensure the buffer passed to
net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header.
Allow it to pass scattered data to net_rx_pkt_set_protocols().
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 2f0fa232b8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While the datasheet of e1000e says it checks CTRL.VME for tx VLAN
tagging, igb's datasheet has no such statements. It also says for
"CTRL.VLE":
> This register only affects the VLAN Strip in Rx it does not have any
> influence in the Tx path in the 82576.
(Appendix A. Changes from the 82575)
There is no "CTRL.VLE" so it is more likely that it is a mistake of
CTRL.VME.
Fixes: fba7c3b788 ("igb: respect VMVIR and VMOLR for VLAN")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit e209716749)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
igb's advanced descriptor uses a packet type encoding different from
one used in e1000e's extended descriptor. Fix the logic to encode
Rx packet type accordingly.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit ed447c60b3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before this change, e1000 and the common code updated BPRC and MPRC
depending on the matched filter, but e1000e and igb decided to update
those counters by deriving the packet type independently. This
inconsistency caused a multicast packet to be counted twice.
Updating BPRC and MPRC depending on are fundamentally flawed anyway as
a filter can be used for different types of packets. For example, it is
possible to filter broadcast packets with MTA.
Always determine what counters to update by inspecting the packets.
Fixes: 3b27430177 ("e1000: Implementing various counters")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit f3f9b726af)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The bytes and packets counter registers are cleared on read.
Copying the "total counter" registers to the "good counter" registers has
side effects.
If the "total" register is never read by the OS, it only gets incremented.
This leads to exponential growth of the "good" register.
This commit increments the counters individually to avoid this.
Signed-off-by: Timothée Cocault <timothee.cocault@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 8d689f6aae)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
nbd_drained_poll() generally runs in the main thread, not whatever
iothread the NBD server coroutine is meant to run in, so it can't
directly reenter the coroutines to wake them up.
The code seems to have the right intention, it specifies the correct
AioContext when it calls qemu_aio_coroutine_enter(). However, this
functions doesn't schedule the coroutine to run in that AioContext, but
it assumes it is already called in the home thread of the AioContext.
To fix this, add a new thread-safe qio_channel_wake_read() that can be
called in the main thread to wake up the coroutine in its AioContext,
and use this in nbd_drained_poll().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 7c1f51bf38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In QEMU 8.0, we've been seeing deadlocks in bdrv_graph_wrlock(). They
come from callers that hold an AioContext lock, which is not allowed
during polling. In theory, we could temporarily release the lock, but
callers are inconsistent about whether they hold a lock, and if they do,
some are also confused about which one they hold. While all of this is
fixable, it's not trivial, and the best course of action for 8.0.1 is
probably just disabling the graph locking code temporarily.
We don't currently rely on graph locking yet. It is supposed to replace
the AioContext lock eventually to enable multiqueue support, but as long
as we still have the AioContext lock, it is sufficient without the graph
lock. Once the AioContext lock goes away, the deadlock doesn't exist any
more either and this commit can be reverted. (Of course, it can also be
reverted while the AioContext lock still exists if the callers have been
fixed.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 80fc5d2600)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 58a2e3f5c3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: pick this one up so the next patch which disables this applies cleanly)
QEMU's event loop supports nesting, which means that event handler
functions may themselves call aio_poll(). The condition that triggered a
handler must be reset before the nested aio_poll() call, otherwise the
same handler will be called and immediately re-enter aio_poll. This
leads to an infinite loop and stack exhaustion.
Poll handlers are especially prone to this issue, because they typically
reset their condition by finishing the processing of pending work.
Unfortunately it is during the processing of pending work that nested
aio_poll() calls typically occur and the condition has not yet been
reset.
Disable a poll handler during ->io_poll_ready() so that a nested
aio_poll() call cannot invoke ->io_poll_ready() again. As a result, the
disabled poll handler and its associated fd handler do not run during
the nested aio_poll(). Calling aio_set_fd_handler() from inside nested
aio_poll() could cause it to run again. If the fd handler is pending
inside nested aio_poll(), then it will also run again.
In theory fd handlers can be affected by the same issue, but they are
more likely to reset the condition before calling nested aio_poll().
This is a special case and it's somewhat complex, but I don't see a way
around it as long as nested aio_poll() is supported.
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2186181
Fixes: c382706925 ("block: Mark bdrv_co_io_(un)plug() and callers GRAPH_RDLOCK")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230502184134.534703-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6d740fb01b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commit 93a97dc520 ("virtio-net: enable vq reset feature") enables
unconditionally vq reset feature as long as the device is emulated.
This makes impossible to actually disable the feature, and it causes
migration problems from qemu version previous than 7.2.
The entire final commit is unneeded as device system already enable or
disable the feature properly.
This reverts commit 93a97dc520.
Fixes: 93a97dc520 ("virtio-net: enable vq reset feature")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230504101447.389398-1-eperezma@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1fac00f70b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since it's implementation on v8.0.0-rc0, having the PCI_ERR_UNCOR_MASK
set for machine types < 8.0 will cause migration to fail if the target
QEMU version is < 8.0.0 :
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10a read: 40 device: 0 cmask: ff wmask: 0 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load e1000e:parent_obj
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:02.0/e1000e'
qemu-system-x86_64: load of migration failed: Invalid argument
The above test migrated a 7.2 machine type from QEMU master to QEMU 7.2.0,
with this cmdline:
./qemu-system-x86_64 -M pc-q35-7.2 [-incoming XXX]
In order to fix this, property x-pcie-err-unc-mask was introduced to
control when PCI_ERR_UNCOR_MASK is enabled. This property is enabled by
default, but is disabled if machine type <= 7.2.
Fixes: 010746ae1d ("hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Message-Id: <20230503002701.854329-1-leobras@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1576
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 5ed3dabe57)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU invokes vhost_svq_add() when adding a guest's element
into SVQ. In vhost_svq_add(), it uses vhost_svq_available_slots()
to check whether QEMU can add the element into SVQ. If there is
enough space, then QEMU combines some out descriptors and some
in descriptors into one descriptor chain, and adds it into
`svq->vring.desc` by vhost_svq_vring_write_descs().
Yet the problem is that, `svq->shadow_avail_idx - svq->shadow_used_idx`
in vhost_svq_available_slots() returns the number of occupied elements,
or the number of descriptor chains, instead of the number of occupied
descriptors, which may cause wrapping in SVQ descriptor ring.
Here is an example. In vhost_handle_guest_kick(), QEMU forwards
as many available buffers to device by virtqueue_pop() and
vhost_svq_add_element(). virtqueue_pop() returns a guest's element,
and then this element is added into SVQ by vhost_svq_add_element(),
a wrapper to vhost_svq_add(). If QEMU invokes virtqueue_pop() and
vhost_svq_add_element() `svq->vring.num` times,
vhost_svq_available_slots() thinks QEMU just ran out of slots and
everything should work fine. But in fact, virtqueue_pop() returns
`svq->vring.num` elements or descriptor chains, more than
`svq->vring.num` descriptors due to guest memory fragmentation,
and this causes wrapping in SVQ descriptor ring.
This bug is valid even before marking the descriptors used.
If the guest memory is fragmented, SVQ must add chains
so it can try to add more descriptors than possible.
This patch solves it by adding `num_free` field in
VhostShadowVirtqueue structure and updating this field
in vhost_svq_add() and vhost_svq_get_buf(), to record
the number of free descriptors.
Fixes: 100890f7ca ("vhost: Shadow virtqueue buffers forwarding")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230509084817.3973-1-yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
(cherry picked from commit 5d410557de)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Compared to other SSE instructions, VUCOMISx and VCOMISx are different:
the single and double precision versions are distinguished through a
prefix, however they use no-prefix and 0x66 for SS and SD respectively.
Scalar values usually are associated with 0xF2 and 0xF3.
Because of these, they incorrectly perform a 128-bit memory load instead
of a 32- or 64-bit load. Fix this by writing a custom decoding function.
I tested that the reproducer is fixed and the test-avx output does not
change.
Reported-by: Gabriele Svelto <gsvelto@mozilla.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1637
Fixes: f8d19eec0d ("target/i386: reimplement 0x0f 0x28-0x2f, add AVX", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2b55e479e6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using linux 6.x guest, at boot time, an inquiry on a scsi-generic
device makes qemu crash. This is caused by a buffer overflow when
scsi-generic patches the block limits VPD page.
Do the operations on a temporary on-stack buffer that is guaranteed
to be large enough.
Reported-by: Théo Maillart <tmaillart@freebox.fr>
Analyzed-by: Théo Maillart <tmaillart@freebox.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9bd634b2f5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit fe904ea824 added a fail_inactivate label, which tries to
reactivate disks on the source after a failure while s->state ==
MIGRATION_STATUS_ACTIVE, but didn't actually use the label if
qemu_savevm_state_complete_precopy() failed. This failure to
reactivate is also present in commit 6039dd5b1c (also covering the new
s->state == MIGRATION_STATUS_DEVICE state) and 403d18ae (ensuring
s->block_inactive is set more reliably).
Consolidate the two labels back into one - no matter HOW migration is
failed, if there is any chance we can reach vm_start() after having
attempted inactivation, it is essential that we have tried to restart
disks before then. This also makes the cleanup more like
migrate_fd_cancel().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502205212.134680-1-eblake@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6dab4c93ec)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: minor context tweak near added comment in migration/migration.c)
No need to declare a temporary variable.
Suggested-by: Juan Quintela <quintela@redhat.com>
Fixes: 1df36e8c6289 ("migration: Handle block device inactivation failures better")
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 5d39f44d7a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Consider what happens when performing a migration between two host
machines connected to an NFS server serving multiple block devices to
the guest, when the NFS server becomes unavailable. The migration
attempts to inactivate all block devices on the source (a necessary
step before the destination can take over); but if the NFS server is
non-responsive, the attempt to inactivate can itself fail. When that
happens, the destination fails to get the migrated guest (good,
because the source wasn't able to flush everything properly):
(qemu) qemu-kvm: load of migration failed: Input/output error
at which point, our only hope for the guest is for the source to take
back control. With the current code base, the host outputs a message, but then appears to resume:
(qemu) qemu-kvm: qemu_savevm_state_complete_precopy_non_iterable: bdrv_inactivate_all() failed (-1)
(src qemu)info status
VM status: running
but a second migration attempt now asserts:
(src qemu) qemu-kvm: ../block.c:6738: int bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
Whether the guest is recoverable on the source after the first failure
is debatable, but what we do not want is to have qemu itself fail due
to an assertion. It looks like the problem is as follows:
In migration.c:migration_completion(), the source sets 'inactivate' to
true (since COLO is not enabled), then tries
savevm.c:qemu_savevm_state_complete_precopy() with a request to
inactivate block devices. In turn, this calls
block.c:bdrv_inactivate_all(), which fails when flushing runs up
against the non-responsive NFS server. With savevm failing, we are
now left in a state where some, but not all, of the block devices have
been inactivated; but migration_completion() then jumps to 'fail'
rather than 'fail_invalidate' and skips an attempt to reclaim those
those disks by calling bdrv_activate_all(). Even if we do attempt to
reclaim disks, we aren't taking note of failure there, either.
Thus, we have reached a state where the migration engine has forgotten
all state about whether a block device is inactive, because we did not
set s->block_inactive in enough places; so migration allows the source
to reach vm_start() and resume execution, violating the block layer
invariant that the guest CPUs should not be restarted while a device
is inactive. Note that the code in migration.c:migrate_fd_cancel()
will also try to reactivate all block devices if s->block_inactive was
set, but because we failed to set that flag after the first failure,
the source assumes it has reclaimed all devices, even though it still
has remaining inactivated devices and does not try again. Normally,
qmp_cont() will also try to reactivate all disks (or correctly fail if
the disks are not reclaimable because NFS is not yet back up), but the
auto-resumption of the source after a migration failure does not go
through qmp_cont(). And because we have left the block layer in an
inconsistent state with devices still inactivated, the later migration
attempt is hitting the assertion failure.
Since it is important to not resume the source with inactive disks,
this patch marks s->block_inactive before attempting inactivation,
rather than after succeeding, in order to prevent any vm_start() until
it has successfully reactivated all devices.
See also https://bugzilla.redhat.com/show_bug.cgi?id=2058982
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit 403d18ae38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
linux-user getgroups(), setgroups(), getgroups32() and setgroups32()
used alloca() to allocate grouplist arrays, with unchecked gidsetsize
coming from the "guest". With NGROUPS_MAX being 65536 (linux, and it
is common for an application to allocate NGROUPS_MAX for getgroups()),
this means a typical allocation is half the megabyte on the stack.
Which just overflows stack, which leads to immediate SIGSEGV in actual
system getgroups() implementation.
An example of such issue is aptitude, eg
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=811087#72
Cap gidsetsize to NGROUPS_MAX (return EINVAL if it is larger than that),
and use heap allocation for grouplist instead of alloca(). While at it,
fix coding style and make all 4 implementations identical.
Try to not impose random limits - for example, allow gidsetsize to be
negative for getgroups() - just do not allocate negative-sized grouplist
in this case but still do actual getgroups() call. But do not allow
negative gidsetsize for setgroups() since its argument is unsigned.
Capping by NGROUPS_MAX seems a bit arbitrary, - we can do more, it is
not an error if set size will be NGROUPS_MAX+1. But we should not allow
integer overflow for the array being allocated. Maybe it is enough to
just call g_try_new() and return ENOMEM if it fails.
Maybe there's also no need to convert setgroups() since this one is
usually smaller and known beforehand (KERN_NGROUPS_MAX is actually 63, -
this is apparently a kernel-imposed limit for runtime group set).
The patch fixes aptitude segfault mentioned above.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20230409105327.1273372-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 1e35d32789)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add new -run-with option with an async-teardown=on|off parameter. It is
visible in the output of query-command-line-options QMP command, so it
can be discovered and used by libvirt.
The option -async-teardown is now redundant, deprecate it.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Fixes: c891c24b1a ("os-posix: asynchronous teardown for shutdown on Linux")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230505120051.36605-2-imbrenda@linux.ibm.com>
[thuth: Add curly braces to fix error with GCC 8.5, fix bug in deprecated.rst]
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 80bd81cadd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context tweak in docs/about/deprecated.rst)
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 88693ab2a5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed
out when free is called. Do the teardown in _disconnect(). This
matches the setup done in _connect().
trace-events are also added for the XenDevOps functions.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20230502143722.15613-1-jandryuk@gmail.com>
[C.S.: - Remove redundant return in xen_9pfs_free().
- Add comment to trace-events. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
(cherry picked from commit 92e667f6fd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
GCC13 reports an error :
../util/async.c: In function ‘aio_bh_poll’:
include/qemu/queue.h:303:22: error: storing the address of local variable ‘slice’ in ‘*ctx.bh_slice_list.sqh_last’ [-Werror=dangling-pointer=]
303 | (head)->sqh_last = &(elm)->field.sqe_next; \
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
../util/async.c:169:5: note: in expansion of macro ‘QSIMPLEQ_INSERT_TAIL’
169 | QSIMPLEQ_INSERT_TAIL(&ctx->bh_slice_list, &slice, next);
| ^~~~~~~~~~~~~~~~~~~~
../util/async.c:161:17: note: ‘slice’ declared here
161 | BHListSlice slice;
| ^~~~~
../util/async.c:161:17: note: ‘ctx’ declared here
But the local variable 'slice' is removed from the global context list
in following loop of the same routine. Add a pragma to silent GCC.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230420202939.1982044-1-clg@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d66ba6dc1c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: cherry-picked to stable-8.0 to eliminate CI failures on win*)
In check_s2_mmu_setup() we have a check that is attempting to
implement the part of AArch64.S2MinTxSZ that is specific to when EL1
is AArch32:
if !s1aarch64 then
// EL1 is AArch32
min_txsz = Min(min_txsz, 24);
Unfortunately we got this wrong in two ways:
(1) The minimum txsz corresponds to a maximum inputsize, but we got
the sense of the comparison wrong and were faulting for all
inputsizes less than 40 bits
(2) We try to implement this as an extra check that happens after
we've done the same txsz checks we would do for an AArch64 EL1, but
in fact the pseudocode is *loosening* the requirements, so that txsz
values that would fault for an AArch64 EL1 do not fault for AArch32
EL1, because it does Min(old_min, 24), not Max(old_min, 24).
You can see this also in the text of the Arm ARM in table D8-8, which
shows that where the implemented PA size is less than 40 bits an
AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit
IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to
constrain the IPA to the implemented PA size.
Because of part (2), we can't do this as a separate check, but
have to integrate it into aa64_va_parameters(). Add a new argument
to that function to indicate that EL1 is 32-bit. All the existing
callsites except the one in get_phys_addr_lpae() can pass 'false',
because they are either doing a lookup for a stage 1 regime or
else they don't care about the tsz/tsz_oob fields.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org
(cherry picked from commit 478dccbb99)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we take a PNG screenshot the ordering of the colour channels in
the data is not correct, resulting in the image having weird
colouring compared to the actual display. (Specifically, on a
little-endian host the blue and red channels are swapped; on
big-endian everything is wrong.)
This happens because the pixman idea of the pixel data and the libpng
idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values,
with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits
0-7. This means that on little-endian systems the bytes in memory
are
B G R A
and on big-endian systems they are
A R G B
libpng, on the other hand, thinks of pixels as being a series of
values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA
always wants bytes in the order
R G B A
This isn't the same as the pixman order for either big or little
endian hosts.
The alpha channel is also unnecessary bulk in the output PNG file,
because there is no alpha information in a screenshot.
To handle the endianness issue, we already define in ui/qemu-pixman.h
various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent
byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and
PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of
R G B
and 3 bytes per pixel.
(PPM format screenshots get this right; they already use the
PIXMAN_BE_r8g8b8 format.)
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622
Fixes: 9a0a119a38 ("Added parameter to take screenshot with screendump as PNG")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org
(cherry picked from commit cd22a0f520)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org
(cherry picked from commit fcc0b0418f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reproduce issue with
configure --enable-qom-cast-debug ...
qemu-system-x86_64 -display none -machine q35,cxl=on -device pxb-cxl,bus=pcie.0
hw/pci-bridge/pci_expander_bridge.c:54:PXB_DEV: Object 0x5570e0b1ada0 is not an instance of type pxb
Aborted
The type conversion results in the right state structure, but PXB_DEV is
not a parent of PXB_CXL_DEV hence the error. Rather than directly
cleaning up the inheritance, this is the minimal fix which will be
followed by the cleanup.
Fixes: 154070eaf6 ("hw/pxb-cxl: Support passthrough HDM Decoders unless overridden")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230420142750.6950-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9136f661c7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit da4afaff07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
job_cancel_locked() drops the job list lock temporarily and it may call
aio_poll(). We must assume that the list has changed after this call.
Also, with unlucky timing, it can end up freeing the job during
job_completed_txn_abort_locked(), making the job pointer invalid, too.
For both reasons, we can't just continue at block_job_next_locked(job).
Instead, start at the head of the list again after job_cancel_locked()
and skip those jobs that we already cancelled (or that are completing
anyway).
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230503140142.474404-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e2626874a3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
meson.build files choose whether to build modules based on foo.found()
expressions. If a feature is enabled (e.g. --enable-gtk), these expressions
are true even if the code is not used by any emulator, and this results
in an unexpected difference between modular and non-modular builds.
For non-modular builds, the files are not included in any binary, and
therefore the source files are never processed. For modular builds,
however, all .so files are unconditionally built by default, and therefore
a normal "make" tries to build them. However, the corresponding trace-*.h
files are absent due to this conditional:
if have_system
trace_events_subdirs += [
...
'ui',
...
]
endif
which was added to avoid wasting time running tracetool on unused trace-events
files. This causes a compilation failure; fix it by skipping module builds
entirely if (depending on the module directory) have_block or have_system
are false.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit ef709860ea)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The float32_exp2 function is computing wrong exponent of 2.
For example, with the following set of values {0.1, 2.0, 2.0, -1.0},
the expected output would be {1.071773, 4.000000, 4.000000, 0.500000}.
Instead, the function is computing {1.119102, 3.382044, 3.382044, -0.191022}
Looking at the code, the float32_exp2() attempts to do this
2 3 4 5 n
x x x x x x x
e = 1 + --- + --- + --- + --- + --- + ... + --- + ...
1! 2! 3! 4! 5! n!
But because of the typo it ends up doing
x x x x x x x
e = 1 + --- + --- + --- + --- + --- + ... + --- + ...
1! 2! 3! 4! 5! n!
This is because instead of the xnp which holds the numerator, parts_muladd
is using the xp which is just 'x'. Commit '572c4d862ff2' refactored this
function, and mistakenly used xp instead of xnp.
Cc: qemu-stable@nongnu.org
Fixes: 572c4d862f "softfloat: Convert float32_exp2 to FloatParts"
Partially-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1623
Reported-By: Luca Barbato (https://gitlab.com/lu-zero)
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-Id: <168304110865.537992.13059030916325018670.stgit@localhost.localdomain>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 1098cc3fcf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most export types install BlockDeviceOps pointers. It is easy to forget
to remove them because that happens automatically via the "drive" qdev
property in hw/ but not block/export/.
Put blk_set_dev_ops(blk, NULL, NULL) calls in the core export.c code so
the export types don't need to remember.
This fixes the nbd and vhost-user-blk export types.
Fixes: fd6afc501a ("nbd/server: Use drained block ops to quiesce the server")
Fixes: ca858a5fe9 ("vhost-user-blk-server: notify client about disk resize")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502211119.720647-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit de79b52604)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In allwinner-sun8i-emac we just read directly from guest memory into
a host FrameDescriptor struct and back. This only works on
little-endian hosts. Reading and writing of descriptors is already
abstracted into functions; make those functions also handle the
byte-swapping so that TransferDescriptor structs as seen by the rest
of the code are always in host-order, and fix two places that were
doing ad-hoc descriptor reading without using the functions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org
(cherry picked from commit a4ae17e5ec)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In allwinner_sdhost_process_desc() we just read directly from
guest memory into a host TransferDescriptor struct and back.
This only works on little-endian hosts. Abstract the reading
and writing of descriptors into functions that handle the
byte-swapping so that TransferDescriptor structs as seen by
the rest of the code are always in host-order.
This fixes a failure of one of the avocado tests on s390.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424165053.1428857-2-peter.maydell@linaro.org
(cherry picked from commit 3e20d90824)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In several places in the 32-bit Arm translate.c, we try to use
load_cpu_field() to load from a CPUARMState field into a TCGv_i32
where the field is actually 64-bit. This works on little-endian
hosts, but gives the wrong half of the register on big-endian.
Add a new load_cpu_field_low32() which loads the low 32 bits
of a 64-bit field into a TCGv_i32. The new macro includes a
compile-time check against accidentally using it on a field
of the wrong size. Use it to fix the two places in the code
where we were using load_cpu_field() on a 64-bit field.
This fixes a bug where on big-endian hosts the guest would
crash after executing an ERET instruction, and a more corner
case one where some UNDEFs for attempted accesses to MSR
banked registers from Secure EL1 might go to the wrong EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230424153909.1419369-2-peter.maydell@linaro.org
(cherry picked from commit 7f3a3d3dc4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Allwinner PIC model uses set_bit() and clear_bit() to update the
values in its irq_pending[] array when an interrupt arrives. However
it is using these functions wrongly: they work on an array of type
'long', and it is passing an array of type 'uint32_t'. Because the
code manually figures out the right array element, this works on
little-endian hosts and on 32-bit big-endian hosts, where bits 0..31
in a 'long' are in the same place as they are in a 'uint32_t'.
However it breaks on 64-bit big-endian hosts.
Remove the use of set_bit() and clear_bit() in favour of using
deposit32() on the array element. This fixes a bug where on
big-endian 64-bit hosts the guest kernel would hang early on in
bootup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152833.1334136-1-peter.maydell@linaro.org
(cherry picked from commit 2c5fa0778c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org
(cherry picked from commit 0acbdb4c4a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org
[PMM: Moved the "make arm_write_bootloader() function public" part
to its own patch; updated commit message to note that this fixes
an actual bug; adjust to the API changes noted in previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 902bba549f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0fe43f0abf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The msf2-emac ethernet controller has functions emac_load_desc() and
emac_store_desc() which read and write the in-memory descriptor
blocks and handle conversion between guest and host endianness.
As currently written, emac_store_desc() does the endianness
conversion in-place; this means that it effectively consumes the
input EmacDesc struct, because on a big-endian host the fields will
be overwritten with the little-endian versions of their values.
Unfortunately, in all the callsites the code continues to access
fields in the EmacDesc struct after it has called emac_store_desc()
-- specifically, it looks at the d.next field.
The effect of this is that on a big-endian host networking doesn't
work because the address of the next descriptor is corrupted.
We could fix this by making the callsite avoid using the struct; but
it's more robust to have emac_store_desc() leave its input alone.
(emac_load_desc() also does an in-place conversion, but here this is
fine, because the function is supposed to be initializing the
struct.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org
(cherry picked from commit d565f58b38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit ad5c6ddea3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 5242876f37 we deprecated the dtb-kaslr-seed property of
the virt board, but forgot the "since n.n" tag in the documentation
of this in deprecated.rst.
This deprecation note first appeared in the 7.1 release, so
retrospectively add the correct "since 7.1" annotation to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230420122256.1023709-1-peter.maydell@linaro.org
(cherry picked from commit ac64ebbecf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We are a bit premature in recommending -blockdev/-device as the best
way to configure block devices. It seems there are times the more
human friendly -drive still makes sense especially when -snapshot is
involved.
Improve the language to hopefully make things clearer.
Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230424092249.58552-7-alex.bennee@linaro.org>
(cherry picked from commit c1654c3e37)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
with Q35 using ACPI PCI hotplug by default, user's request to unplug
device is ignored when it's issued before guest OS has been booted.
And any additional attempt to request device hot-unplug afterwards
results in following error:
"Device XYZ is already in the process of unplug"
arguably it can be considered as a regression introduced by [2],
before which it was possible to issue unplug request multiple
times.
Accept new uplug requests after timeout (1ms). This brings ACPI PCI
hotplug on par with native PCIe unplug behavior [1] and allows user
to repeat unplug requests at propper times.
Set expire timeout to arbitrary 1msec so user won't be able to
flood guest with SCI interrupts by calling device_del in tight loop.
PS:
ACPI spec doesn't mandate what OSPM can do with GPEx.status
bits set before it's booted => it's impl. depended.
Status bits may be retained (I tested with one Windows version)
or cleared (Linux since 2.6 kernel times) during guest's ACPI
subsystem initialization.
Clearing status bits (though not wrong per se) hides the unplug
event from guest, and it's upto user to repeat device_del later
when guest is able to handle unplug requests.
1) 18416c62e3 ("pcie: expire pending delete")
2)
Fixes: cce8944cc9 ("qdev-monitor: Forbid repeated device_del")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
CC: mst@redhat.com
CC: anisinha@redhat.com
CC: jusual@redhat.com
CC: kraxel@redhat.com
Message-Id: <20230418090449.2155757-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
(cherry picked from commit 0f689cf5ad)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If hostlen is zero, there is a possibility that addrstr[hostlen - 1]
underflows and, if a closing bracked is there, hostlen - 2 is passed
to g_strndup() on the next line. If websocket==false then
addrstr[0] would be a colon, but if websocket==true this could in
principle happen.
Fix it by checking hostlen.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3f9c41c5df)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
