merge upstream

Signed-off-by: Marco Chiappero <marco.chiappero@suse.com>

.gitignore

@@ -1,3 +1,4 @@
 */.osc
 */__pycache__
 .venv/
+.idea/

.obs/common.py

@@ -1,3 +1,3 @@
-PROJECT = "isv:SUSE:Edge:3.3"
+PROJECT = "isv:SUSE:Edge:Factory"
 REPOSITORY = "https://src.opensuse.org/suse-edge/Factory"
-BRANCH = "3.3"
+BRANCH = "main"

.pre-commit-config.yaml

@@ -3,7 +3,7 @@ repos:
     hooks:
       - id: check-manifest
         name: "Check release-manifest"
-        entry: python3 .obs/manifest-check.py
+        entry: .obs/manifest-check.py
         language: python
         additional_dependencies: ['ruamel.yaml']
         pass_filenames: false

_config

@@ -1,4 +1,5 @@
 Prefer: -libqpid-proton10 -python311-urllib3_1
+Prefer: -cargo1.58 -cargo1.57 cargo1.88
 
 Macros:
 %__python3 /usr/bin/python3.11
@@ -60,6 +61,7 @@ BuildFlags: onlybuild:release-manifest-image
     BuildFlags: excludebuild:endpoint-copier-operator-image
     BuildFlags: excludebuild:ironic-image
     BuildFlags: excludebuild:ironic-ipa-downloader-image
+    BuildFlags: excludebuild:kiwi-builder-image
     BuildFlags: excludebuild:kubectl-image
     BuildFlags: excludebuild:kube-rbac-proxy-image
     BuildFlags: excludebuild:metallb-controller-image
@@ -104,7 +106,7 @@ BuildFlags: onlybuild:release-manifest-image
     Patterntype: none
     BuildEngine: podman
     Prefer: sles-release
-    BuildFlags: dockerarg:SLE_VERSION=15.6
+    BuildFlags: dockerarg:SLE_VERSION=15.7
 
     # Publish multi-arch container images only once all archs have been built
     PublishFlags: archsync
@@ -149,6 +151,10 @@ BuildFlags: onlybuild:release-manifest-image
 %else
     %if "%{sub %{reverse %_project} 1 7}" != "%{reverse :ToTest}" && "%{sub %{reverse %_project} 1 9}" != "%{reverse :Snapshot}"
       BuildFlags: excludebuild:kiwi-builder-image
+    %else
+      %ifarch aarch64
+        BuildFlags: onlybuild:kiwi-builder-image
+      %endif
     %endif
 %endif
 

_meta

@@ -45,7 +45,7 @@
       <path project="SUSE:SLFO:Products:SLES:16.0" repository="standard"/>
       <path project="SUSE:SLFO:Main:Build" repository="standard"/>
     {%- else %}
-      <path project="SUSE:CA" repository="SLE_15_SP6"/>
+      <path project="SUSE:CA" repository="SLE_15_SP7"/>
       <path project="{{ project }}" repository="standard"/>
     {%- endif %}
     <arch>x86_64</arch>
@@ -56,8 +56,8 @@
     {%- if release_project is defined and not for_release %}
     <releasetarget project="{{ release_project }}" repository="standard" trigger="manual"/>
     {%- endif %}
-    <path project="{{ ironic_base }}:2024.2" repository="15.6"/>
-    <path project="SUSE:SLE-15-SP6:Update" repository="standard"/>
+    <path project="{{ ironic_base }}:2025.1" repository="15.7"/>
+    <path project="SUSE:SLE-15-SP7:Update" repository="standard"/>
     <arch>x86_64</arch>
     <arch>aarch64</arch>
   </repository>

akri-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1-%RELEASE%
 annotations:

baremetal-operator-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%baremetal-operator:%%baremetal-operator_version%%.1
 #!BuildTag: %%IMG_PREFIX%%baremetal-operator:%%baremetal-operator_version%%.1-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

edge-image-builder-image/Dockerfile

@@ -1,6 +1,5 @@
 #!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1
 #!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
 MAINTAINER SUSE LLC (https://www.suse.com/)

edge-image-builder-image/artifacts.yaml

@@ -5,7 +5,7 @@ metallb:
 endpoint-copier-operator:
   chart: endpoint-copier-operator
   repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+  version: "%%CHART_MAJOR%%.0.1+up0.3.0"
 kubernetes:
   k3s:
     selinuxPackage: k3s-selinux-1.6-1.slemicro.noarch

endpoint-copier-operator-chart/Chart.yaml

@@ -1,8 +1,8 @@
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0-%RELEASE%
 apiVersion: v2
-appVersion: v0.2.0
+appVersion: v0.3.0
 description: A Helm chart for Kubernetes
 name: endpoint-copier-operator
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+version: "%%CHART_MAJOR%%.0.1+up0.3.0"

endpoint-copier-operator-chart/templates/deployment.yaml

@@ -20,8 +20,23 @@ spec:
       labels:
         {{- include "endpoint-copier-operator.selectorLabels" . | nindent 8 }}
     spec:
+      {{- if .Values.priorityClassName }}
+      priorityClassName: {{ .Values.priorityClassName }}
+      {{- end }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
       containers:
       - command:
         - /manager

endpoint-copier-operator-chart/templates/rbac/role.yaml

@@ -7,9 +7,9 @@ metadata:
   name: {{ include "endpoint-copier-operator.fullname" . }}
 rules:
 - apiGroups:
-  - ""
+  - "discovery.k8s.io"
   resources:
-  - endpoints
+  - endpointslices
   verbs:
   - create
   - delete

endpoint-copier-operator-chart/values.yaml

@@ -8,7 +8,7 @@ image:
   repository: %%IMG_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator
   pullPolicy: IfNotPresent
   # Overrides the image tag whose default is the chart appVersion.
-  tag: "0.2.0"
+  tag: "0.3.0"
 
 nameOverride: "endpoint-copier-operator"
 fullnameOverride: "endpoint-copier-operator"
@@ -29,6 +29,8 @@ podSecurityContext:
   seccompProfile:
     type: RuntimeDefault
 
+priorityClassName: "system-cluster-critical"
+
 securityContext:
   allowPrivilegeEscalation: false
   capabilities:
@@ -37,11 +39,11 @@ securityContext:
 
 resources:
   limits:
-    cpu: 500m
-    memory: 128Mi
-  requests:
-    cpu: 10m
+    cpu: 100m
     memory: 64Mi
+  requests:
+    cpu: 5m
+    memory: 32Mi
 
 autoscaling:
   enabled: false

endpoint-copier-operator-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator:%%endpoint-copier-operator_version%%
 #!BuildTag: %%IMG_PREFIX%%endpoint-copier-operator:%%endpoint-copier-operator_version%%-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

endpoint-copier-operator/_service

@@ -2,7 +2,7 @@
  <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/endpoint-copier-operator</param>
     <param name="scm">git</param>
-    <param name="revision">v0.2.0</param>
+    <param name="revision">v0.3.0</param>
     <param name="version">_auto_</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="changesgenerate">enable</param>

endpoint-copier-operator/endpoint-copier-operator.spec

@@ -17,14 +17,14 @@
 
 
 Name:           endpoint-copier-operator
-Version:        0.2.0
-Release:        0.2.0
+Version:        0.3.0
+Release:        0.3.0
 Summary:        Implements a Kubernetes API for copying endpoint resources
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/endpoint-copier-operator
 Source:         endpoint-copier-operator-%{version}.tar
 Source1:        vendor.tar.gz
-BuildRequires:  golang(API) = 1.20
+BuildRequires:  golang(API) = 1.24
 ExcludeArch:    s390
 ExcludeArch:    %{ix86}
 

frr-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: MIT
 #!BuildTag: %%IMG_PREFIX%%frr:8.5.6
 #!BuildTag: %%IMG_PREFIX%%frr:8.5.6-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

frr-k8s-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%frr-k8s:v%%frr-k8s_version%%
 #!BuildTag: %%IMG_PREFIX%%frr-k8s:v%%frr-k8s_version%%-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

ironic-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.4
-#!BuildTag: %%IMG_PREFIX%%ironic:26.1.2.4-%RELEASE%
-#!BuildVersion: 15.6
+#!BuildTag: %%IMG_PREFIX%%ironic:29.0.4.1
+#!BuildTag: %%IMG_PREFIX%%ironic:29.0.4.1-%RELEASE%
 
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
@@ -20,11 +19,11 @@ RUN sed -i -e 's%^# rpm.install.excludedocs = no.*%rpm.install.excludedocs = yes
 
 #!ArchExclusiveLine: x86_64
 RUN if [ "$(uname -m)" = "x86_64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends syslinux python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
+      zypper --installroot /installroot --non-interactive install --no-recommends syslinux python311-devel python311 python311-pip python311-sushy-oem-idrac python311-proliantutils python311-sushy python311-pyinotify python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi ipcalc ipmitool iproute2 bind-utils procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic; \
     fi
 #!ArchExclusiveLine: aarch64
 RUN if [ "$(uname -m)" = "aarch64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
+      zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python311-sushy-oem-idrac python311-proliantutils python311-sushy python311-pyinotify python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi ipcalc ipmitool iproute2 bind-utils procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic; \
     fi
     
 # DATABASE
@@ -32,7 +31,9 @@ RUN mkdir -p /installroot/var/lib/ironic && \
   /installroot/usr/bin/sqlite3 /installroot/var/lib/ironic/ironic.sqlite "pragma journal_mode=wal" && \
   zypper --installroot /installroot --non-interactive remove sqlite3
 
+# build actual image
 FROM micro AS final
+
 MAINTAINER SUSE LLC (https://www.suse.com/)
 # Define labels according to https://en.opensuse.org/Building_derived_containers
 LABEL org.opencontainers.image.title="SLE Openstack Ironic Container Image"
@@ -40,8 +41,8 @@ LABEL org.opencontainers.image.description="Openstack Ironic based on the SLE Ba
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opencontainers.image.version="26.1.2.4"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic:26.1.2.4-%RELEASE%"
+LABEL org.opencontainers.image.version="29.0.4.1"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic:29.0.4.1-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -62,14 +63,19 @@ RUN echo 'alias mkisofs="xorriso -as mkisofs"' >> ~/.bashrc
 COPY mkisofs_wrapper /usr/bin/mkisofs
 RUN set -euo pipefail; chmod +x /usr/bin/mkisofs
 
-COPY auth-common.sh configure-ironic.sh ironic-common.sh rundnsmasq runhttpd runironic runlogwatch.sh tls-common.sh configure-nonroot.sh ironic-probe.j2 /bin/
-RUN set -euo pipefail; chmod +x /bin/auth-common.sh; chmod +x /bin/configure-ironic.sh; chmod +x /bin/ironic-common.sh; chmod +x /bin/rundnsmasq; chmod +x /bin/runhttpd; chmod +x /bin/runironic; chmod +x /bin/runlogwatch.sh; chmod +x /bin/tls-common.sh; chmod +x /bin/configure-nonroot.sh;
 RUN mkdir -p /tftpboot
 RUN mkdir -p $GRUB_DIR
 
-# No need to support the Legacy BIOS boot
-#RUN cp /usr/share/syslinux/pxelinux.0 /tftpboot
-#RUN cp /usr/share/syslinux/chain.c32 /tftpboot/
+COPY scripts/ /bin/
+COPY configure-nonroot.sh /bin/
+RUN set -euo pipefail; chmod +x /bin/configure-ironic.sh /bin/ironic-probe.sh /bin/rundatabase-upgrade /bin/rundnsmasq /bin/runhttpd /bin/runironic /bin/runlogwatch.sh /bin/runonline-data-migrations /bin/configure-nonroot.sh
+
+RUN mv /bin/ironic-probe.sh /bin/ironic-readiness
+RUN cp /bin/ironic-readiness /bin/ironic-liveness
+
+COPY ironic-config/inspector.ipxe.j2 ironic-config/httpd-ironic-api.conf.j2 \
+     ironic-config/ipxe_config.template ironic-config/dnsmasq.conf.j2 \
+     /tmp/
 
 # IRONIC #
 RUN cp /usr/share/ipxe/undionly.kpxe /tftpboot/undionly.kpxe
@@ -77,7 +83,7 @@ RUN cp /usr/share/ipxe/undionly.kpxe /tftpboot/undionly.kpxe
 RUN if [ "$(uname -m)" = "x86_64" ];then \
       cp /usr/share/ipxe/ipxe-x86_64.efi /tftpboot/ipxe.efi ;\
     fi
-#!ArchExclusiveLine: x86_64
+#!ArchExclusiveLine: aarch64 
 RUN if [ "$(uname -m)" = "aarch64" ]; then\ 
       cp /usr/share/ipxe/snp-arm64.efi /tftpboot/ipxe.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp-arm64.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp.efi ;\
     fi
@@ -85,23 +91,17 @@ RUN if [ "$(uname -m)" = "aarch64" ]; then\
 COPY --from=base /tmp/esp-x86_64.img /tmp/uefi_esp-x86_64.img
 COPY --from=base /tmp/esp-aarch64.img /tmp/uefi_esp-arm64.img
 
-COPY ironic.conf.j2 /etc/ironic/
-COPY inspector.ipxe.j2 httpd-ironic-api.conf.j2 ipxe_config.template /tmp/
-COPY network-data-schema-empty.json /etc/ironic/
-
-# DNSMASQ
-COPY dnsmasq.conf.j2 /etc/
-
-# Custom httpd config, removes all but the bare minimum needed modules
-COPY httpd.conf.j2 /etc/httpd/conf/
-COPY httpd-modules.conf /etc/httpd/conf.modules.d/
-COPY apache2-vmedia.conf.j2 /etc/httpd-vmedia.conf.j2
-COPY apache2-ipxe.conf.j2 /etc/httpd-ipxe.conf.j2
+COPY ironic-config/ironic.conf.j2 ironic-config/network-data-schema-empty.json /etc/ironic/
 
 # Workaround
 # Removing the 010-ironic.conf file that comes with the package 
 RUN rm /etc/ironic/ironic.conf.d/010-ironic.conf
 
+# Custom httpd config, removes all but the bare minimum needed modules
+COPY ironic-config/httpd.conf.j2 /etc/httpd/conf/
+COPY ironic-config/httpd-modules.conf /etc/httpd/conf.modules.d/
+COPY ironic-config/apache2-vmedia.conf.j2 /tmp/httpd-vmedia.conf.j2
+COPY ironic-config/apache2-ipxe.conf.j2 /tmp/httpd-ipxe.conf.j2
+
 # configure non-root user and set relevant permissions
-RUN configure-nonroot.sh && \
-  rm -f /bin/configure-nonroot.sh
+RUN configure-nonroot.sh && rm -f /bin/configure-nonroot.sh

ironic-image/auth-common.sh

@@ -1,59 +0,0 @@
-#!/usr/bin/bash
-
-set -euxo pipefail
-
-export IRONIC_REVERSE_PROXY_SETUP=${IRONIC_REVERSE_PROXY_SETUP:-false}
-
-# Backward compatibility
-if [[ "${IRONIC_DEPLOYMENT:-}" == "Conductor" ]]; then
-    export IRONIC_EXPOSE_JSON_RPC=true
-else
-    export IRONIC_EXPOSE_JSON_RPC="${IRONIC_EXPOSE_JSON_RPC:-false}"
-fi
-
-IRONIC_HTPASSWD_FILE=/etc/ironic/htpasswd
-if [[ -f "/auth/ironic/htpasswd" ]]; then
-    IRONIC_HTPASSWD=$(</auth/ironic/htpasswd)
-fi
-export IRONIC_HTPASSWD=${IRONIC_HTPASSWD:-${HTTP_BASIC_HTPASSWD:-}}
-
-configure_client_basic_auth()
-{
-    local auth_config_file="/auth/$1/auth-config"
-    local dest="${2:-/etc/ironic/ironic.conf}"
-    if [[ -f "${auth_config_file}" ]]; then
-        # Merge configurations in the "auth" directory into the default ironic configuration file
-        crudini --merge "${dest}" < "${auth_config_file}"
-    fi
-}
-
-configure_json_rpc_auth()
-{
-    if [[ "${IRONIC_EXPOSE_JSON_RPC}" == "true" ]]; then
-        if [[ -z "${IRONIC_HTPASSWD}" ]]; then
-            echo "FATAL: enabling JSON RPC requires authentication"
-            exit 1
-        fi
-        printf "%s\n" "${IRONIC_HTPASSWD}" > "${IRONIC_HTPASSWD_FILE}-rpc"
-    fi
-}
-
-configure_ironic_auth()
-{
-    local config=/etc/ironic/ironic.conf
-    # Configure HTTP basic auth for API server
-    if [[ -n "${IRONIC_HTPASSWD}" ]]; then
-        printf "%s\n" "${IRONIC_HTPASSWD}" > "${IRONIC_HTPASSWD_FILE}"
-        if [[ "${IRONIC_REVERSE_PROXY_SETUP}" == "false" ]]; then
-            crudini --set "${config}" DEFAULT auth_strategy http_basic
-            crudini --set "${config}" DEFAULT http_basic_auth_user_file "${IRONIC_HTPASSWD_FILE}"
-        fi
-    fi
-}
-
-write_htpasswd_files()
-{
-    if [[ -n "${IRONIC_HTPASSWD:-}" ]]; then
-        printf "%s\n" "${IRONIC_HTPASSWD}" > "${IRONIC_HTPASSWD_FILE}"
-    fi
-}

ironic-image/configure-nonroot.sh

@@ -1,53 +1,70 @@
 #!/usr/bin/bash
 
+# This script changes permissions to allow Ironic container to run as non-root
+# user. As the same image is used to run ironic, ironic-httpd, ironic-dsnmasq,
+# and ironic-log-watch via BMO's ironic k8s manifest, it has
+# to be configured to work with multiple different users and groups, while they
+# share files via bind mounts (/shared, /certs/*), which can only get one
+# group id as "fsGroup". Additionally, dnsmasq needs three capabilities to run
+# which we provide via "setcap", and "allowPrivilegeEscalation: true" in
+# manifest.
+
+set -eux
+
+# user and group are from ironic rpms (uid 997, gid 994)
 NONROOT_UID=10475
 NONROOT_GID=10475
-USER="ironic-suse"
+IRONIC_USER="ironic-suse"
+IRONIC_GROUP="ironic-suse"
 
-groupadd -r -g ${NONROOT_GID} ${USER}
+groupadd -r -g ${NONROOT_GID} ${IRONIC_GROUP}
 useradd -r -g ${NONROOT_GID} \
            -u ${NONROOT_UID} \
            -d /var/lib/ironic \
            -s /sbin/nologin \
-           ${USER}
+           ${IRONIC_USER}
 
-# create ironic's http_root directory
-mkdir -p /shared/html
-chown "${NONROOT_UID}":"${NONROOT_GID}" /shared/html
+# most containers mount /shared but dnsmasq can live without it
+mkdir -p /shared
+mkdir -p /data
+mkdir -p /conf
+chown "${IRONIC_USER}":"${IRONIC_GROUP}" /shared
+chown "${IRONIC_USER}":"${IRONIC_GROUP}" /data
+chown "${IRONIC_USER}":"${IRONIC_GROUP}" /conf
 
 # we'll bind mount shared ca and ironic certificate dirs here
 # that need to have correct ownership as the entire ironic in BMO
 # deployment shares a single fsGroup in manifest's securityContext
 mkdir -p /certs/ca
-chown "${NONROOT_UID}":"${NONROOT_GID}" /certs{,/ca}
+chown "${IRONIC_USER}":"${IRONIC_GROUP}" /certs{,/ca}
 chmod 2775 /certs{,/ca}
 
 # apache2 permission changes
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /etc/apache2
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /run
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /etc/apache2
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /run
 
 # ironic and httpd related changes
 mkdir -p /etc/httpd/conf.d
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /etc/ironic /etc/httpd /etc/httpd
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /var/log
-chmod 2775 /etc/ironic /etc/httpd/conf /etc/httpd/conf.d
-chmod 664 /etc/ironic/* /etc/httpd/conf/* /etc/httpd/conf.d/*
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /etc/ironic /etc/httpd/conf /etc/httpd/conf.d /etc/httpd/conf.modules.d/
+chmod 2775 /etc/ironic /etc/httpd/conf /etc/httpd/conf.d /etc/httpd/conf.modules.d/
+#chmod 664 /etc/ironic/* /etc/httpd/conf/* /etc/httpd/conf.d/*
+chmod 664 /etc/ironic/* /etc/httpd/conf/* /etc/httpd/conf.modules.d/*
 
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /var/lib/ironic
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /var/lib/ironic
+chmod 2775 /var/lib/ironic
 chmod 664 /var/lib/ironic/ironic.sqlite
 
 # dnsmasq, and the capabilities required to run it as non-root user
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /etc/dnsmasq.conf /var/lib/dnsmasq
-chmod 2775 /var/lib/dnsmasq
-touch /var/lib/dnsmasq/dnsmasq.leases
-chmod 664 /etc/dnsmasq.conf /var/lib/dnsmasq/dnsmasq.leases
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /etc/dnsmasq.conf
+#handled at chart level
+#setcap "cap_net_raw,cap_net_admin,cap_net_bind_service=+eip" /usr/sbin/dnsmasq
 
 # ca-certificates permission changes
 touch /var/lib/ca-certificates/ca-bundle.pem.new
-chown -R "${NONROOT_UID}":"${NONROOT_GID}" /var/lib/ca-certificates/
+chown -R "${IRONIC_USER}":"${IRONIC_GROUP}" /var/lib/ca-certificates/
 chmod -R +w /var/lib/ca-certificates/
 
 # probes that are created before start
 touch /bin/ironic-{readi,live}ness
-chown root:"${NONROOT_GID}" /bin/ironic-{readi,live}ness
+chown root:"${IRONIC_GROUP}" /bin/ironic-{readi,live}ness
 chmod 775 /bin/ironic-{readi,live}ness

ironic-image/inspector-apache.conf.j2

@@ -1,57 +0,0 @@
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-
-
-{% if env.LISTEN_ALL_INTERFACES | lower == "true" %}
-Listen {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
- <VirtualHost *:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}>
-{% else %}
-Listen {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
- <VirtualHost {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}>
-{% endif %}
-    {% if env.IRONIC_INSPECTOR_PRIVATE_PORT == "unix" %}
-    ProxyPass "/"  "unix:/shared/inspector.sock|http://127.0.0.1/"
-    ProxyPassReverse "/"  "unix:/shared/inspector.sock|http://127.0.0.1/"
-    {% else %}
-    ProxyPass "/"  "http://127.0.0.1:{{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}/"
-    ProxyPassReverse "/"  "http://127.0.0.1:{{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}/"
-    {% endif %}
-
-    SetEnv APACHE_RUN_USER ironic-suse
-    SetEnv APACHE_RUN_GROUP ironic-suse
-
-    ErrorLog /dev/stdout
-    LogLevel debug
-    CustomLog /dev/stdout combined
-
-    SSLEngine On
-    SSLProtocol {{ env.IRONIC_SSL_PROTOCOL }}
-    SSLCertificateFile {{ env.IRONIC_INSPECTOR_CERT_FILE }} 
-    SSLCertificateKeyFile {{ env.IRONIC_INSPECTOR_KEY_FILE }}
-
-    {% if "INSPECTOR_HTPASSWD" in env and env.INSPECTOR_HTPASSWD | length %}
-    <Location / >
-        AuthType Basic
-        AuthName "Restricted area"
-        AuthUserFile "/etc/ironic-inspector/htpasswd"
-        Require valid-user
-    </Location>
-
-    <Location ~ "^/(v1/?)?$" >
-        Require all granted
-    </Location>
-
-    <Location /v1/continue >
-        Require all granted
-    </Location>
-    {% endif %}
-</VirtualHost>

ironic-image/inspector.ipxe.j2

@@ -1,10 +0,0 @@
-#!ipxe
-
-:retry_boot
-echo In inspector.ipxe
-imgfree
-# NOTE(dtantsur): keep inspection kernel params in [mdns]params in
-# ironic-inspector-image and configuration in configure-ironic.sh
-kernel --timeout 60000 http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/images/ironic-python-agent-${buildarch}.kernel ipa-insecure=1 ipa-inspection-collectors={{ env.IRONIC_IPA_COLLECTORS }} systemd.journald.forward_to_console=yes BOOTIF=${mac} ipa-debug=1 ipa-enable-vlan-interfaces={{ env.IRONIC_ENABLE_VLAN_INTERFACES }} ipa-inspection-dhcp-all-interfaces=1 ipa-collect-lldp=1 {{ env.INSPECTOR_EXTRA_ARGS }} initrd=ironic-python-agent.initramfs {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} || goto retry_boot
-initrd --timeout 60000 http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/images/ironic-python-agent-${buildarch}.initramfs || goto retry_boot
-boot

ironic-image/ironic-common.sh

@@ -1,107 +0,0 @@
-#!/usr/bin/bash
-
-set -euxo pipefail
-
-IRONIC_IP="${IRONIC_IP:-}"
-PROVISIONING_INTERFACE="${PROVISIONING_INTERFACE:-}"
-PROVISIONING_IP="${PROVISIONING_IP:-}"
-PROVISIONING_MACS="${PROVISIONING_MACS:-}"
-IPXE_CUSTOM_FIRMWARE_DIR="${IPXE_CUSTOM_FIRMWARE_DIR:-/shared/custom_ipxe_firmware}"
-
-get_provisioning_interface()
-{
-    if [[ -n "$PROVISIONING_INTERFACE" ]]; then
-        # don't override the PROVISIONING_INTERFACE if one is provided
-        echo "$PROVISIONING_INTERFACE"
-        return
-    fi
-
-    local interface="provisioning"
-
-    if [[ -n "${PROVISIONING_IP}" ]]; then
-        if ip -br addr show | grep -qi " ${PROVISIONING_IP}/"; then
-            interface="$(ip -br addr show | grep -i " ${PROVISIONING_IP}/" | cut -f 1 -d ' ' | cut -f 1 -d '@')"
-        fi
-    fi
-
-    for mac in ${PROVISIONING_MACS//,/ }; do
-        if ip -br link show up | grep -qi "$mac"; then
-            interface="$(ip -br link show up | grep -i "$mac" | cut -f 1 -d ' ' | cut -f 1 -d '@')"
-            break
-        fi
-    done
-
-    echo "$interface"
-}
-
-PROVISIONING_INTERFACE="$(get_provisioning_interface)"
-export PROVISIONING_INTERFACE
-
-export LISTEN_ALL_INTERFACES="${LISTEN_ALL_INTERFACES:-true}"
-
-# Wait for the interface or IP to be up, sets $IRONIC_IP
-wait_for_interface_or_ip()
-{
-    # If $PROVISIONING_IP is specified, then we wait for that to become available on an interface, otherwise we look at $PROVISIONING_INTERFACE for an IP
-    if [[ -n "$PROVISIONING_IP" ]]; then
-        # Convert the address using ipcalc which strips out the subnet. For IPv6 addresses, this will give the short-form address
-        IRONIC_IP="$(ipcalc "${PROVISIONING_IP}" | grep "^Address:" | awk '{print $2}')"
-        export IRONIC_IP
-        until grep -F " ${IRONIC_IP}/" <(ip -br addr show); do
-            echo "Waiting for ${IRONIC_IP} to be configured on an interface"
-            sleep 1
-        done
-    else
-        until [[ -n "$IRONIC_IP" ]]; do
-            echo "Waiting for ${PROVISIONING_INTERFACE} interface to be configured"
-            IRONIC_IP="$(ip -br add show scope global up dev "${PROVISIONING_INTERFACE}" | awk '{print $3}' | sed -e 's%/.*%%' | head -n 1)"
-            export IRONIC_IP
-            sleep 1
-        done
-    fi
-
-    # If the IP contains a colon, then it's an IPv6 address, and the HTTP
-    # host needs surrounding with brackets
-    if [[ "$IRONIC_IP" =~ .*:.* ]]; then
-        export IPV=6
-        export IRONIC_URL_HOST="[$IRONIC_IP]"
-    else
-        export IPV=4
-        export IRONIC_URL_HOST="$IRONIC_IP"
-    fi
-}
-
-render_j2_config()
-{
-    ls $1 # DEBUG
-    python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < "$1"
-    python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < "$1" > "$2"
-    ls $2 # DEBUG
-}
-
-run_ironic_dbsync()
-{
-    if [[ "${IRONIC_USE_MARIADB:-true}" == "true" ]]; then
-        # It's possible for the dbsync to fail if mariadb is not up yet, so
-        # retry until success
-        until ironic-dbsync --config-file /etc/ironic/ironic.conf upgrade; do
-            echo "WARNING: ironic-dbsync failed, retrying"
-            sleep 1
-        done
-    else
-        # SQLite does not support some statements. Fortunately, we can just create
-        # the schema in one go if not already created, instead of going through an upgrade
-        DB_VERSION="$(ironic-dbsync --config-file /etc/ironic/ironic.conf version)"
-        if [[ "${DB_VERSION}" == "None" ]]; then
-            ironic-dbsync --config-file /etc/ironic/ironic.conf create_schema
-        fi
-    fi
-}
-
-# Use the special value "unix" for unix sockets
-export IRONIC_PRIVATE_PORT=${IRONIC_PRIVATE_PORT:-unix}
-
-export IRONIC_ACCESS_PORT=${IRONIC_ACCESS_PORT:-6385}
-export IRONIC_LISTEN_PORT=${IRONIC_LISTEN_PORT:-$IRONIC_ACCESS_PORT}
-
-export IRONIC_ENABLE_DISCOVERY=${IRONIC_ENABLE_DISCOVERY:-${IRONIC_INSPECTOR_ENABLE_DISCOVERY:-false}}

ironic-image/ironic-config/apache2-ipxe.conf.j2

@@ -1,4 +1,5 @@
-Listen {{ env.IPXE_TLS_PORT }}
+Listen 0.0.0.0:{{ env.IPXE_TLS_PORT }}
+Listen [::]:{{ env.IPXE_TLS_PORT }}
 
 <VirtualHost *:{{ env.IPXE_TLS_PORT }}>
     ErrorLog /dev/stderr

ironic-image/ironic-config/apache2-vmedia.conf.j2

@@ -1,4 +1,5 @@
-Listen {{ env.VMEDIA_TLS_PORT }}
+Listen 0.0.0.0:{{ env.VMEDIA_TLS_PORT }}
+Listen [::]:{{ env.VMEDIA_TLS_PORT }}
 
 <VirtualHost *:{{ env.VMEDIA_TLS_PORT }}>
     ErrorLog /dev/stderr
@@ -10,12 +11,12 @@ Listen {{ env.VMEDIA_TLS_PORT }}
     SSLCertificateFile {{ env.IRONIC_VMEDIA_CERT_FILE }}
     SSLCertificateKeyFile {{ env.IRONIC_VMEDIA_KEY_FILE }}
 
-    <Directory "/shared">
+    <Directory "/shared/html/">
+        Options Indexes FollowSymLinks
         AllowOverride None
         Require all granted
     </Directory>
-
-    <Directory "/shared/html">
+    <Directory ~ "/shared/html/(redfish|ilo)/">
         Options Indexes FollowSymLinks
         AllowOverride None
         Require all granted

ironic-image/ironic-config/dnsmasq.conf.j2

@@ -3,6 +3,7 @@ bind-dynamic
 enable-tftp
 tftp-root=/shared/tftpboot
 log-queries
+dhcp-leasefile=/data/dnsmasq/dnsmasq.leases
 
 # Configure listening for DNS (0 disables DNS)
 port={{ env.DNS_PORT }}
@@ -31,11 +32,11 @@ dhcp-match=ipxe,175
 # Client is already running iPXE; move to next stage of chainloading
 {%- if env.IPXE_TLS_SETUP == "true"  %}
 # iPXE with (U)EFI
-dhcp-boot=tag:efi,tag:ipxe,http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/custom-ipxe/snponly.efi
+dhcp-boot=tag:efi,tag:ipxe,{{ env.IRONIC_HTTP_URL }}/custom-ipxe/snponly.efi
 # iPXE with BIOS
-dhcp-boot=tag:ipxe,http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/custom-ipxe/undionly.kpxe
+dhcp-boot=tag:ipxe,{{ env.IRONIC_HTTP_URL }}/custom-ipxe/undionly.kpxe
 {% else %}
-dhcp-boot=tag:ipxe,http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/boot.ipxe
+dhcp-boot=tag:ipxe,{{ env.IRONIC_HTTP_URL }}/boot.ipxe
 {% endif %}
 
 # Note: Need to test EFI booting
@@ -59,8 +60,8 @@ ra-param={{ env.PROVISIONING_INTERFACE }},0,0
 
 dhcp-vendorclass=set:pxe6,enterprise:343,PXEClient
 dhcp-userclass=set:ipxe6,iPXE
-dhcp-option=tag:pxe6,option6:bootfile-url,tftp://{{ env.IRONIC_URL_HOST }}/snponly.efi
-dhcp-option=tag:ipxe6,option6:bootfile-url,http://{{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}/boot.ipxe
+dhcp-option=tag:pxe6,option6:bootfile-url,{{ env.IRONIC_TFTP_URL }}/snponly.efi
+dhcp-option=tag:ipxe6,option6:bootfile-url,{{ env.IRONIC_HTTP_URL }}/boot.ipxe
 
 # It can be used when setting DNS or GW variables.
 {%- if env["GATEWAY_IP"] is undefined %}

ironic-image/ironic-config/httpd-ironic-api.conf.j2

@@ -12,11 +12,21 @@
 
 
 {% if env.LISTEN_ALL_INTERFACES | lower == "true" %}
-Listen {{ env.IRONIC_LISTEN_PORT }}
+Listen 0.0.0.0:{{ env.IRONIC_LISTEN_PORT }}
+Listen [::]:{{ env.IRONIC_LISTEN_PORT }}
  <VirtualHost *:{{ env.IRONIC_LISTEN_PORT }}>
 {% else %}
-Listen {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_LISTEN_PORT }}
- <VirtualHost {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_LISTEN_PORT }}>
+{% if env.ENABLE_IPV4 %}
+Listen {{ env.IRONIC_IP }}:{{ env.IRONIC_LISTEN_PORT }}
+{% endif %}
+{% if env.ENABLE_IPV6 %}
+Listen [{{ env.IRONIC_IPV6 }}]:{{ env.IRONIC_LISTEN_PORT }}
+{% endif %}
+{% if env.IRONIC_URL_HOSTNAME is defined and env.IRONIC_URL_HOSTNAME|length %}
+<VirtualHost {{ env.IRONIC_URL_HOSTNAME }}:{{ env.IRONIC_LISTEN_PORT }}>
+{% else %}
+<VirtualHost {% if env.ENABLE_IPV4 %}{{ env.IRONIC_IP }}:{{ env.IRONIC_LISTEN_PORT }}{% endif %} {% if env.ENABLE_IPV6 %}[{{ env.IRONIC_IPV6 }}]:{{ env.IRONIC_LISTEN_PORT }}{% endif %}>
+{% endif %}
 {% endif %}
 
     {% if env.IRONIC_PRIVATE_PORT == "unix" %}
@@ -45,7 +55,7 @@ Listen {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_LISTEN_PORT }}
          {% if "IRONIC_HTPASSWD" in env and env.IRONIC_HTPASSWD | length %}
             AuthType Basic
             AuthName "Restricted area"
-            AuthUserFile "/etc/ironic/htpasswd"
+            AuthUserFile {{ env.HTPASSWD_FILE }}
             Require valid-user
          {% endif %}
     </Location>

ironic-image/ironic-config/httpd-modules.conf

@@ -17,4 +17,4 @@ LoadModule authn_core_module /usr/lib64/apache2/mod_authn_core.so
 LoadModule auth_basic_module /usr/lib64/apache2/mod_auth_basic.so
 LoadModule authn_file_module /usr/lib64/apache2/mod_authn_file.so
 LoadModule authz_user_module /usr/lib64/apache2/mod_authz_user.so
-LoadModule access_compat_module /usr/lib64/apache2/mod_access_compat.so
+#LoadModule access_compat_module /usr/lib64/apache2/mod_access_compat.so

ironic-image/ironic-config/httpd.conf.j2

@@ -1,10 +1,16 @@
-ServerRoot "/etc/httpd"
+ServerRoot {{ env.HTTPD_DIR }}
 {%- if env.LISTEN_ALL_INTERFACES | lower == "true" %}
-Listen {{ env.HTTP_PORT }}
+Listen 0.0.0.0:{{ env.HTTP_PORT }}
+Listen [::]:{{ env.HTTP_PORT }}
 {% else %}
-Listen {{ env.IRONIC_URL_HOST }}:{{ env.HTTP_PORT }}
+{% if env.ENABLE_IPV4 %}
+Listen {{ env.IRONIC_IP }}:{{ env.HTTP_PORT }}
 {% endif %}
-Include conf.modules.d/*.conf
+{% if env.ENABLE_IPV6 %}
+Listen [{{ env.IRONIC_IPV6 }}]:{{ env.HTTP_PORT }}
+{% endif %}
+{% endif %}
+Include /etc/httpd/conf.modules.d/*.conf
 User ironic-suse
 Group ironic-suse
 

ironic-image/ironic-config/inspector.ipxe.j2

@@ -0,0 +1,10 @@
+#!ipxe
+
+:retry_boot
+echo In inspector.ipxe
+imgfree
+# NOTE(dtantsur): keep inspection kernel params in [mdns]params in
+# ironic-inspector-image and configuration in configure-ironic.sh
+kernel --timeout 60000 {{ env.IRONIC_HTTP_URL }}/images/ironic-python-agent-${buildarch}.kernel ipa-insecure={{ env.IPA_INSECURE }} ipa-inspection-collectors={{ env.IRONIC_IPA_COLLECTORS }} systemd.journald.forward_to_console=yes BOOTIF=${mac} ipa-debug=1 ipa-enable-vlan-interfaces={{ env.IRONIC_ENABLE_VLAN_INTERFACES }} ipa-inspection-dhcp-all-interfaces=1 ipa-collect-lldp=1 {{ env.INSPECTOR_EXTRA_ARGS }} initrd=ironic-python-agent-${buildarch}.initramfs {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} || goto retry_boot
+initrd --timeout 60000 {{ env.IRONIC_HTTP_URL }}/images/ironic-python-agent-${buildarch}.initramfs || goto retry_boot
+boot

ironic-image/ironic-config/ironic.conf.j2

@@ -25,8 +25,15 @@ rpc_transport = none
 use_stderr = true
 # NOTE(dtantsur): the default md5 is not compatible with FIPS mode
 hash_ring_algorithm = sha256
+{% if env.ENABLE_IPV4 %}
 my_ip = {{ env.IRONIC_IP }}
+{% endif %}
+{% if env.ENABLE_IPV6 %}
+my_ipv6 = {{ env.IRONIC_IPV6 }}
+{% endif %}
+
 host = {{ env.IRONIC_CONDUCTOR_HOST }}
+tempdir = {{ env.IRONIC_TMP_DATA_DIR }}
 
 # If a path to a certificate is defined, use that first for webserver
 {% if env.WEBSERVER_CACERT_FILE %}
@@ -49,6 +56,7 @@ deploy_logs_local_path = /shared/log/ironic/deploy
 # retries here works around such problems without affecting the normal path.
 # See https://bugzilla.redhat.com/show_bug.cgi?id=1822763
 max_command_attempts = 30
+certificates_path = {{ env.IRONIC_GEN_CERT_DIR }}
 
 [api]
 {% if env.IRONIC_REVERSE_PROXY_SETUP == "true" %}
@@ -63,7 +71,7 @@ port = {{ env.IRONIC_PRIVATE_PORT }}
 {% endif %}
 public_endpoint = {{ env.IRONIC_BASE_URL }}
 {% else %}
-host_ip = {% if env.LISTEN_ALL_INTERFACES | lower == "true" %}::{% else %}{{ env.IRONIC_IP }}{% endif %}
+host_ip = {{ env.IRONIC_HOST_IP }}
 port = {{ env.IRONIC_LISTEN_PORT }}
 {% if env.IRONIC_TLS_SETUP == "true" %}
 enable_ssl_api = true
@@ -83,7 +91,11 @@ send_sensor_data = {{ env.SEND_SENSOR_DATA }}
 # Power state is checked every 60 seconds and BMC activity should
 # be avoided more often than once every sixty seconds.
 send_sensor_data_interval = 160
-bootloader = {{ env.IRONIC_BOOT_BASE_URL }}/uefi_esp-{{ env.DEPLOY_ARCHITECTURE }}.img
+{% if env.VMEDIA_TLS_PORT %}
+bootloader = {{ env.IRONIC_HTTPS_VMEDIA_URL }}/uefi_esp-{{ env.DEPLOY_ARCHITECTURE }}.img
+{% else %}
+bootloader = {{ env.IRONIC_HTTP_URL }}/uefi_esp-{{ env.DEPLOY_ARCHITECTURE }}.img
+{% endif %}
 verify_step_priority_override = management.clear_job_queue:90
 # We don't use this feature, and it creates an additional load on the database
 node_history = False
@@ -95,16 +107,19 @@ deploy_kernel = file://{{ env.IRONIC_DEFAULT_KERNEL }}
 {% if env.IRONIC_DEFAULT_RAMDISK is defined %}
 deploy_ramdisk = file://{{ env.IRONIC_DEFAULT_RAMDISK }}
 {% endif %}
+{% if env.DISABLE_DEEP_IMAGE_INSPECTION | lower == "true" %}
+disable_deep_image_inspection = True
+{% endif %}
 
 [database]
-{% if env.IRONIC_USE_MARIADB | lower == "false" %}
-connection = sqlite:////var/lib/ironic/ironic.sqlite
+{% if env.IRONIC_USE_MARIADB | lower == "true" %}
+connection = {{ env.MARIADB_CONNECTION }}
+{% else %}
+connection = {{ env.LOCAL_DB_URI }}
 # Synchronous mode is required for data integrity in case of operating system
 # crash. In our case we restart the container from scratch, so we can save some
 # IO by not doing syncs all the time.
 sqlite_synchronous = False
-{% else %}
-connection = {{ env.MARIADB_CONNECTION }}
 {% endif %}
 
 [deploy]
@@ -112,15 +127,15 @@ default_boot_option = local
 erase_devices_metadata_priority = 10
 erase_devices_priority = 0
 http_root = /shared/html/
-http_url = {{ env.IRONIC_BOOT_BASE_URL }}
+http_url = {% if env.VMEDIA_TLS_PORT %}{{ env.IRONIC_HTTPS_VMEDIA_URL }}{% else %}{{ env.IRONIC_HTTP_URL }}{% endif %}
 fast_track = {{ env.IRONIC_FAST_TRACK }}
 {% if env.IRONIC_BOOT_ISO_SOURCE %}
 ramdisk_image_download_source = {{ env.IRONIC_BOOT_ISO_SOURCE }}
 {% endif %}
 {% if env.IRONIC_EXTERNAL_HTTP_URL %}
 external_http_url = {{ env.IRONIC_EXTERNAL_HTTP_URL }}
-{% elif env.IRONIC_VMEDIA_TLS_SETUP == "true" %}
-external_http_url = https://{{ env.IRONIC_URL_HOST }}:{{ env.VMEDIA_TLS_PORT }}
+{% elif env.VMEDIA_TLS_PORT %}
+external_http_url = {{ env.IRONIC_HTTPS_VMEDIA_URL }}
 {% endif %}
 {% if env.IRONIC_EXTERNAL_CALLBACK_URL %}
 external_callback_url = {{ env.IRONIC_EXTERNAL_CALLBACK_URL }}
@@ -175,8 +190,8 @@ cipher_suite_versions = 3,17
 # unauthenticated connections from other processes in the same host since the
 # containers are in host networking.
 auth_strategy = http_basic
-http_basic_auth_user_file = /etc/ironic/htpasswd-rpc
-host_ip = {% if env.LISTEN_ALL_INTERFACES | lower == "true" %}::{% else %}{{ env.IRONIC_IP }}{% endif %}
+http_basic_auth_user_file = {{ env.IRONIC_RPC_HTPASSWD_FILE }}
+host_ip = {{ env.IRONIC_HOST_IP }}
 {% if env.IRONIC_TLS_SETUP == "true" %}
 use_ssl = true
 cafile = {{ env.IRONIC_CACERT_FILE }}
@@ -187,11 +202,6 @@ insecure = {{ env.IRONIC_INSECURE }}
 [nova]
 send_power_notifications = false
 
-[oslo_messaging_notifications]
-driver = prometheus_exporter
-location = /shared/ironic_prometheus_exporter
-transport_url = fake://
-
 [pxe]
 # NOTE(dtantsur): keep this value at least 3x lower than
 # [conductor]deploy_callback_timeout so that at least some retries happen.
@@ -201,7 +211,7 @@ images_path = /shared/html/tmp
 instance_master_path = /shared/html/master_images
 tftp_master_path = /shared/tftpboot/master_images
 tftp_root = /shared/tftpboot
-kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes net.ifnames={{ '0' if env.PREDICTABLE_NIC_NAMES == 'false' else '1' }}
+kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes
 # This makes networking boot templates generated even for nodes using local
 # boot (the default), ensuring that they boot correctly even if they start
 # netbooting for some reason (e.g. with the noop management interface).
@@ -214,14 +224,14 @@ ipxe_config_template = /tmp/ipxe_config.template
 
 [redfish]
 use_swift = false
-kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes net.ifnames={{ '0' if env.PREDICTABLE_NIC_NAMES == 'false' else '1' }}
+kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes
 
 [ilo]
-kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes net.ifnames={{ '0' if env.PREDICTABLE_NIC_NAMES == 'false' else '1' }}
+kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes
 use_web_server_for_images = true
 
 [irmc]
-kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes net.ifnames={{ '0' if env.PREDICTABLE_NIC_NAMES == 'false' else '1' }}
+kernel_append_params = nofb nomodeset vga=normal ipa-insecure={{ env.IPA_INSECURE }} {% if env.ENABLE_FIPS_IPA %}fips={{ env.ENABLE_FIPS_IPA|trim }}{% endif %} {% if env.IRONIC_RAMDISK_SSH_KEY %}sshkey="{{ env.IRONIC_RAMDISK_SSH_KEY|trim }}"{% endif %} {{ env.IRONIC_KERNEL_PARAMS|trim }} systemd.journald.forward_to_console=yes
 
 [service_catalog]
 endpoint_override = {{ env.IRONIC_BASE_URL }}

ironic-image/ironic-inspector.conf.j2

@@ -1,68 +0,0 @@
-[DEFAULT]
-auth_strategy = noauth
-debug = true
-transport_url = fake://
-use_stderr = true
-{% if env.INSPECTOR_REVERSE_PROXY_SETUP == "true" %}
-{% if env.IRONIC_INSPECTOR_PRIVATE_PORT == "unix" %}
-listen_unix_socket = /shared/inspector.sock
-# NOTE(dtantsur): this is not ideal, but since the socket is accessed from
-# another container, we need to make it world-writeable.
-listen_unix_socket_mode = 0666
-{% else %}
-listen_port = {{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}
-listen_address = 127.0.0.1
-{% endif %}
-{% elif env.LISTEN_ALL_INTERFACES | lower == "true" %}
-listen_port = {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
-listen_address = ::
-{% else %}
-listen_port = {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
-listen_address = {{ env.IRONIC_IP }}
-{% endif %}
-host = {{ env.IRONIC_IP }}
-{% if env.IRONIC_INSPECTOR_TLS_SETUP == "true" and env.INSPECTOR_REVERSE_PROXY_SETUP == "false" %}
-use_ssl = true
-{% endif %}
-
-[database]
-connection = sqlite:////var/lib/ironic-inspector/ironic-inspector.db
-
-{% if env.IRONIC_INSPECTOR_ENABLE_DISCOVERY == "true" %}
-[discovery]
-enroll_node_driver = ipmi
-{% endif %}
-
-[ironic]
-auth_type = none
-endpoint_override = {{ env.IRONIC_BASE_URL }}
-{% if env.IRONIC_TLS_SETUP == "true" %}
-cafile = {{ env.IRONIC_CACERT_FILE }}
-insecure = {{ env.IRONIC_INSECURE }}
-{% endif %}
-
-[processing]
-add_ports = all
-always_store_ramdisk_logs = true
-keep_ports = present
-{% if env.IRONIC_INSPECTOR_ENABLE_DISCOVERY == "true" %}
-node_not_found_hook = enroll
-{% endif %}
-permit_active_introspection = true
-power_off = false
-processing_hooks = $default_processing_hooks,lldp_basic
-ramdisk_logs_dir = /shared/log/ironic-inspector/ramdisk
-store_data = database
-
-[pxe_filter]
-driver = noop
-
-[service_catalog]
-auth_type = none
-endpoint_override = {{ env.IRONIC_INSPECTOR_BASE_URL }}
-
-{% if env.IRONIC_INSPECTOR_TLS_SETUP == "true" and env.INSPECTOR_REVERSE_PROXY_SETUP == "false" %}
-[ssl]
-cert_file = {{ env.IRONIC_INSPECTOR_CERT_FILE }}
-key_file = {{ env.IRONIC_INSPECTOR_KEY_FILE }}
-{% endif %}

ironic-image/ironic-probe.j2

@@ -1,9 +0,0 @@
-#!/bin/bash
-
-set -eu -o pipefail
-
-curl -sSf {{ env.PROBE_CURL_ARGS }} "{{ env.PROBE_URL }}"
-
-# TODO(dtantsur): when PROBE_KIND==readiness, try the conductor and driver API
-# to make sure the conductor is ready. This requires having access to secrets
-# since these endpoints are authenticated.

ironic-image/runironic

@@ -1,23 +0,0 @@
-#!/usr/bin/bash
-
-# This setting must go before configure-ironic since it has different defaults.
-export IRONIC_USE_MARIADB=${IRONIC_USE_MARIADB:-false}
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-# Ramdisk logs
-mkdir -p /shared/log/ironic/deploy
-
-run_ironic_dbsync
-
-if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
-        kill $(pgrep ironic)
-    done &
-fi
-
-configure_ironic_auth
-
-exec /usr/bin/ironic

ironic-image/runironic-api

@@ -1,13 +0,0 @@
-#!/usr/bin/bash
-
-export IRONIC_DEPLOYMENT="API"
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-export IRONIC_REVERSE_PROXY_SETUP=false
-
-python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < /tmp/httpd-ironic-api.conf.j2 > /etc/httpd/conf.d/ironic.conf
-
-# shellcheck disable=SC1091
-. /bin/runhttpd

ironic-image/runironic-conductor

@@ -1,20 +0,0 @@
-#!/usr/bin/bash
-
-export IRONIC_DEPLOYMENT="Conductor"
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-# Ramdisk logs
-mkdir -p /shared/log/ironic/deploy
-
-run_ironic_dbsync
-
-if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
-        kill $(pgrep ironic)
-    done &
-fi
-
-exec /usr/bin/ironic-conductor

ironic-image/runironic-exporter

@@ -1,12 +0,0 @@
-#!/usr/bin/bash
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-FLASK_RUN_HOST=${FLASK_RUN_HOST:-0.0.0.0}
-FLASK_RUN_PORT=${FLASK_RUN_PORT:-9608}
-
-export IRONIC_CONFIG="/etc/ironic/ironic.conf"
-
-exec gunicorn -b "${FLASK_RUN_HOST}:${FLASK_RUN_PORT}" -w 4 \
-    ironic_prometheus_exporter.app.wsgi:application

ironic-image/runironic-inspector

@@ -1,62 +0,0 @@
-#!/usr/bin/bash
-
-set -euxo pipefail
-
-CONFIG=/etc/ironic-inspector/ironic-inspector.conf
-
-export IRONIC_INSPECTOR_ENABLE_DISCOVERY=${IRONIC_INSPECTOR_ENABLE_DISCOVERY:-false}
-export INSPECTOR_REVERSE_PROXY_SETUP=${INSPECTOR_REVERSE_PROXY_SETUP:-false}
-
-# shellcheck disable=SC1091
-. /bin/tls-common.sh
-# shellcheck disable=SC1091
-. /bin/ironic-common.sh
-# shellcheck disable=SC1091
-. /bin/auth-common.sh
-
-if [[ "$USE_IRONIC_INSPECTOR" == "false" ]]; then
-    echo "FATAL: ironic-inspector is disabled via USE_IRONIC_INSPECTOR"
-    exit 1
-fi
-
-wait_for_interface_or_ip
-
-IRONIC_INSPECTOR_PORT=${IRONIC_INSPECTOR_ACCESS_PORT}
-if [[ "$IRONIC_INSPECTOR_TLS_SETUP" == "true" ]]; then
-    if [[ "${INSPECTOR_REVERSE_PROXY_SETUP}" == "true" ]] && [[ "${IRONIC_INSPECTOR_PRIVATE_PORT}" != "unix" ]]; then
-        IRONIC_INSPECTOR_PORT=$IRONIC_INSPECTOR_PRIVATE_PORT
-    fi
-else
-    export INSPECTOR_REVERSE_PROXY_SETUP="false" # If TLS is not used, we have no reason to use the reverse proxy
-fi
-
-export IRONIC_INSPECTOR_BASE_URL="${IRONIC_INSPECTOR_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_INSPECTOR_PORT}"
-export IRONIC_BASE_URL="${IRONIC_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_ACCESS_PORT}"
-
-build_j2_config()
-{
-    local CONFIG_FILE="$1"
-    python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < "$CONFIG_FILE.j2"
-}
-
-# Merge with the original configuration file from the package.
-build_j2_config "$CONFIG" | crudini --merge "$CONFIG"
-
-configure_inspector_auth
-
-configure_client_basic_auth ironic "${CONFIG}"
-
-ironic-inspector-dbsync --config-file "${CONFIG}" upgrade
-
-if [[ "$INSPECTOR_REVERSE_PROXY_SETUP" == "false" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_INSPECTOR_CERT_FILE}" | while read -r file event; do
-        kill $(pgrep ironic)
-    done &
-fi
-
-# Make sure ironic traffic bypasses any proxies
-export NO_PROXY="${NO_PROXY:-},$IRONIC_IP"
-
-# shellcheck disable=SC2086
-exec /usr/bin/ironic-inspector

ironic-image/runlogwatch.sh

@@ -1,19 +0,0 @@
-#!/usr/bin/bash
-
-# Ramdisk logs path
-LOG_DIR="/shared/log/ironic/deploy"
-
-# The ironic container creates the directory, wait for
-# it to exist before running inotifywait or it can fail causing
-# a spurious restart
-while [ ! -d "${LOG_DIR}" ]; do
-  echo "Waiting for ${LOG_DIR}"
-  sleep 5
-done
-
-inotifywait -m "${LOG_DIR}" -e close_write |
-    while read -r path _action file; do
-        echo "************ Contents of ${path}/${file} ramdisk log file bundle **************"
-        tar -xOzvvf "${path}/${file}" | sed -e "s/^/${file}: /"
-        rm -f "${path}/${file}"
-    done

ironic-image/scripts/auth-common.sh

@@ -0,0 +1,97 @@
+#!/usr/bin/bash
+
+set -euxo pipefail
+
+export IRONIC_REVERSE_PROXY_SETUP=${IRONIC_REVERSE_PROXY_SETUP:-false}
+
+# CUSTOM_CONFIG_DIR is also managed in the ironic-common.sh, in order to
+# keep auth-common and ironic-common separate (to stay consistent with the
+# architecture) part of the ironic-common logic had to be duplicated
+CUSTOM_CONFIG_DIR="${CUSTOM_CONFIG_DIR:-/conf}"
+IRONIC_CONF_DIR="${CUSTOM_CONFIG_DIR}/ironic"
+
+# Backward compatibility
+if [[ "${IRONIC_DEPLOYMENT:-}" == "Conductor" ]]; then
+    export IRONIC_EXPOSE_JSON_RPC=true
+else
+    export IRONIC_EXPOSE_JSON_RPC="${IRONIC_EXPOSE_JSON_RPC:-false}"
+fi
+
+IRONIC_HTPASSWD_FILE="${IRONIC_CONF_DIR}/htpasswd"
+export IRONIC_RPC_HTPASSWD_FILE="${IRONIC_HTPASSWD_FILE}-rpc"
+if [[ -f "/auth/ironic/htpasswd" ]]; then
+    IRONIC_HTPASSWD=$(</auth/ironic/htpasswd)
+fi
+if [[ -f "/auth/ironic-rpc/htpasswd" ]]; then
+    IRONIC_RPC_HTPASSWD=$(</auth/ironic-rpc/htpasswd)
+fi
+export IRONIC_HTPASSWD=${IRONIC_HTPASSWD:-${HTTP_BASIC_HTPASSWD:-}}
+export IRONIC_RPC_HTPASSWD=${IRONIC_RPC_HTPASSWD:-${IRONIC_HTPASSWD}}
+
+if [[ -n "${MARIADB_PASSWORD:-}" ]]; then
+    echo "WARNING: passing MARIADB_PASSWORD is deprecated, mount a secret under /auth/mariadb instead"
+elif [[ -f /auth/mariadb/password ]]; then
+    MARIADB_PASSWORD=$(</auth/mariadb/password)
+fi
+
+if [[ -z "${MARIADB_USER:-}" ]] && [[ -f /auth/mariadb/username ]]; then
+    MARIADB_USER=$(</auth/mariadb/username)
+fi
+
+IRONIC_CONFIG="${IRONIC_CONF_DIR}/ironic.conf"
+
+configure_json_rpc_auth()
+{
+    if [[ "${IRONIC_EXPOSE_JSON_RPC}" != "true" ]]; then
+        return
+    fi
+
+    local auth_config_file="/auth/ironic-rpc/auth-config"
+    local username_file="/auth/ironic-rpc/username"
+    local password_file="/auth/ironic-rpc/password"
+    if [[ -f "${username_file}" ]] && [[ -f "${password_file}" ]]; then
+        crudini --set "${IRONIC_CONFIG}" json_rpc username "$(<${username_file})"
+        set +x
+        crudini --set "${IRONIC_CONFIG}" json_rpc password "$(<${password_file})"
+        set -x
+    elif [[ -f "${auth_config_file}" ]]; then
+        echo "WARNING: using auth-config is deprecated, mount a secret directly"
+        # Merge configurations in the "auth" directory into the default ironic configuration file
+        crudini --merge "${IRONIC_CONFIG}" < "${auth_config_file}"
+    else
+        echo "FATAL: no client-side credentials provided for JSON RPC"
+        echo "HINT: mount a secret with username and password fields under /auth/ironic-rpc"
+        exit 1
+    fi
+
+    if [[ -z "${IRONIC_RPC_HTPASSWD}" ]]; then
+        if [[ -f "${username_file}" ]] && [[ -f "${password_file}" ]]; then
+            htpasswd -c -i -B "${IRONIC_RPC_HTPASSWD_FILE}" "$(<${username_file})" <"${password_file}"
+        else
+            echo "FATAL: enabling JSON RPC requires authentication"
+            echo "HINT: mount a secret with either username and password or htpasswd under /auth/ironic-rpc"
+            exit 1
+        fi
+    else
+        printf "%s\n" "${IRONIC_RPC_HTPASSWD}" > "${IRONIC_RPC_HTPASSWD_FILE}"
+    fi
+}
+
+configure_ironic_auth()
+{
+    # Configure HTTP basic auth for API server
+    if [[ -n "${IRONIC_HTPASSWD}" ]]; then
+        printf "%s\n" "${IRONIC_HTPASSWD}" > "${IRONIC_HTPASSWD_FILE}"
+        if [[ "${IRONIC_REVERSE_PROXY_SETUP}" == "false" ]]; then
+            crudini --set "${IRONIC_CONFIG}" DEFAULT auth_strategy http_basic
+            crudini --set "${IRONIC_CONFIG}" DEFAULT http_basic_auth_user_file "${IRONIC_HTPASSWD_FILE}"
+        fi
+    fi
+}
+
+write_htpasswd_files()
+{
+    if [[ -n "${IRONIC_HTPASSWD:-}" ]]; then
+        printf "%s\n" "${IRONIC_HTPASSWD}" > "${IRONIC_HTPASSWD_FILE}"
+    fi
+}

ironic-image/scripts/configure-ironic.sh

@@ -3,6 +3,7 @@
 set -euxo pipefail
 
 IRONIC_EXTERNAL_IP="${IRONIC_EXTERNAL_IP:-}"
+export VMEDIA_TLS_PORT="${VMEDIA_TLS_PORT:-}"
 
 # Define the VLAN interfaces to be included in introspection report, e.g.
 #   all - all VLANs on all interfaces using LLDP information
@@ -19,10 +20,11 @@ export IRONIC_ENABLE_VLAN_INTERFACES=${IRONIC_ENABLE_VLAN_INTERFACES:-${IRONIC_I
 
 export HTTP_PORT=${HTTP_PORT:-80}
 
-export IRONIC_USE_MARIADB=${IRONIC_USE_MARIADB:-true}
-
-if [[ "$IRONIC_USE_MARIADB" == "true" ]]; then
-    MARIADB_PASSWORD=${MARIADB_PASSWORD}
+if [[ "${IRONIC_USE_MARIADB}" == true ]]; then
+    if [[ -z "${MARIADB_PASSWORD:-}" ]]; then
+        echo "FATAL: IRONIC_USE_MARIADB requires password, mount a secret under /auth/mariadb"
+        exit 1
+    fi
     MARIADB_DATABASE=${MARIADB_DATABASE:-ironic}
     MARIADB_USER=${MARIADB_USER:-ironic}
     MARIADB_HOST=${MARIADB_HOST:-127.0.0.1}
@@ -32,13 +34,9 @@ if [[ "$IRONIC_USE_MARIADB" == "true" ]]; then
     fi
 fi
 
-# TODO(dtantsur): remove the explicit default once we get
-# https://review.opendev.org/761185 in the repositories
-NUMPROC="$(grep -c "^processor" /proc/cpuinfo)"
-if [[ "$NUMPROC" -lt 4 ]]; then
-    NUMPROC=4
-fi
-export NUMWORKERS=${NUMWORKERS:-$NUMPROC}
+# zero makes it do cpu number detection on Ironic side
+export NUMWORKERS=${NUMWORKERS:-0}
+
 
 # Whether to enable fast_track provisioning or not
 export IRONIC_FAST_TRACK=${IRONIC_FAST_TRACK:-true}
@@ -54,11 +52,21 @@ export IRONIC_IPA_COLLECTORS=${IRONIC_IPA_COLLECTORS:-default,logs}
 
 wait_for_interface_or_ip
 
+if [[ "$(echo "$LISTEN_ALL_INTERFACES" | tr '[:upper:]' '[:lower:]')" == "true" ]]; then
+export IRONIC_HOST_IP="::"
+elif [[ -n "${ENABLE_IPV6}" ]]; then
+export IRONIC_HOST_IP="$IRONIC_IPV6"
+else
+export IRONIC_HOST_IP="$IRONIC_IP"
+fi
+
+if [[ "${VMEDIA_TLS_PORT}" ]]; then
+   export IRONIC_HTTPS_VMEDIA_URL="https://${IRONIC_URL_HOST}:${VMEDIA_TLS_PORT}"
+fi
+
 # Hostname to use for the current conductor instance.
 export IRONIC_CONDUCTOR_HOST=${IRONIC_CONDUCTOR_HOST:-${IRONIC_URL_HOST}}
 
-export IRONIC_BASE_URL=${IRONIC_BASE_URL:-"${IRONIC_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_ACCESS_PORT}"}
-
 if [[ -n "$IRONIC_EXTERNAL_IP" ]]; then
     export IRONIC_EXTERNAL_CALLBACK_URL=${IRONIC_EXTERNAL_CALLBACK_URL:-"${IRONIC_SCHEME}://${IRONIC_EXTERNAL_IP}:${IRONIC_ACCESS_PORT}"}
     if [[ "$IRONIC_VMEDIA_TLS_SETUP" == "true" ]]; then
@@ -74,9 +82,9 @@ if [[ -f "${IMAGE_CACHE_PREFIX}.kernel" ]] && [[ -f "${IMAGE_CACHE_PREFIX}.initr
     export IRONIC_DEFAULT_RAMDISK="${IMAGE_CACHE_PREFIX}.initramfs"
 fi
 
-if [[ -f /etc/ironic/ironic.conf ]]; then
+if [[ -f "${IRONIC_CONF_DIR}/ironic.conf" ]]; then
     # Make a copy of the original supposed empty configuration file
-    cp /etc/ironic/ironic.conf /etc/ironic/ironic.conf_orig
+    cp "${IRONIC_CONF_DIR}/ironic.conf" "${IRONIC_CONF_DIR}/ironic.conf.orig"
 fi
 
 # oslo.config also supports Config Opts From Environment, log them to stdout
@@ -84,9 +92,6 @@ echo 'Options set from Environment variables'
 env | grep "^OS_" || true
 
 mkdir -p /shared/html
-mkdir -p /shared/ironic_prometheus_exporter
-
-configure_json_rpc_auth
 
 if [[ -f /proc/sys/crypto/fips_enabled ]]; then
     ENABLE_FIPS_IPA=$(cat /proc/sys/crypto/fips_enabled)
@@ -94,26 +99,17 @@ if [[ -f /proc/sys/crypto/fips_enabled ]]; then
 fi
 
 # The original ironic.conf is empty, and can be found in ironic.conf_orig
-render_j2_config /etc/ironic/ironic.conf.j2 /etc/ironic/ironic.conf
+render_j2_config "/etc/ironic/ironic.conf.j2" \
+    "${IRONIC_CONF_DIR}/ironic.conf"
 
-configure_client_basic_auth ironic-rpc
+configure_json_rpc_auth
 
 # Make sure ironic traffic bypasses any proxies
-export NO_PROXY="${NO_PROXY:-},$IRONIC_IP"
+export NO_PROXY="${NO_PROXY:-}"
 
-PROBE_CURL_ARGS=
-if [[ "${IRONIC_REVERSE_PROXY_SETUP}" == "true" ]]; then
-    if [[ "${IRONIC_PRIVATE_PORT}" == "unix" ]]; then
-        PROBE_URL="http://127.0.0.1:6385"
-        PROBE_CURL_ARGS="--unix-socket /shared/ironic.sock"
-    else
-        PROBE_URL="http://127.0.0.1:${IRONIC_PRIVATE_PORT}"
+if [[ -n "$IRONIC_IPV6" ]]; then
+export NO_PROXY="${NO_PROXY},${IRONIC_IPV6}"
 fi
-else
-        PROBE_URL="${IRONIC_BASE_URL}"
+if [[ -n "$IRONIC_IP" ]]; then
+export NO_PROXY="${NO_PROXY},${IRONIC_IP}"
 fi
-export PROBE_CURL_ARGS
-export PROBE_URL
-
-PROBE_KIND=readiness render_j2_config /bin/ironic-probe.j2 /bin/ironic-readiness
-PROBE_KIND=liveness render_j2_config /bin/ironic-probe.j2 /bin/ironic-liveness

ironic-image/scripts/ironic-common.sh

@@ -0,0 +1,295 @@
+#!/usr/bin/bash
+
+set -euxo pipefail
+
+# Export IRONIC_IP to avoid needing to lean on IRONIC_URL_HOST for consumption in
+# e.g. dnsmasq configuration
+export IRONIC_IP="${IRONIC_IP:-}"
+IRONIC_IPV6="${IRONIC_IPV6:-}"
+PROVISIONING_INTERFACE="${PROVISIONING_INTERFACE:-}"
+PROVISIONING_IP="${PROVISIONING_IP:-}"
+PROVISIONING_MACS="${PROVISIONING_MACS:-}"
+IRONIC_URL_HOSTNAME="${IRONIC_URL_HOSTNAME:-}"
+IPXE_CUSTOM_FIRMWARE_DIR="${IPXE_CUSTOM_FIRMWARE_DIR:-/shared/custom_ipxe_firmware}"
+CUSTOM_CONFIG_DIR="${CUSTOM_CONFIG_DIR:-/conf}"
+CUSTOM_DATA_DIR="${CUSTOM_DATA_DIR:-/data}"
+export DNSMASQ_CONF_DIR="${CUSTOM_CONFIG_DIR}/dnsmasq"
+export DNSMASQ_DATA_DIR="${CUSTOM_DATA_DIR}/dnsmasq"
+export DNSMASQ_TEMP_DIR="${CUSTOM_CONFIG_DIR}/dnsmasq"
+export HTTPD_DIR="${CUSTOM_CONFIG_DIR}/httpd"
+export HTTPD_CONF_DIR="${HTTPD_DIR}/conf"
+export HTTPD_CONF_DIR_D="${HTTPD_DIR}/conf.d"
+export IRONIC_CONF_DIR="${CUSTOM_CONFIG_DIR}/ironic"
+export IRONIC_DB_DIR="${CUSTOM_DATA_DIR}/db"
+export IRONIC_GEN_CERT_DIR="${CUSTOM_DATA_DIR}/auto_gen_certs"
+export IRONIC_TMP_DATA_DIR="${CUSTOM_DATA_DIR}/tmp"
+export PROBE_CONF_DIR="${CUSTOM_CONFIG_DIR}/probes"
+
+mkdir -p "${IRONIC_CONF_DIR}" "${PROBE_CONF_DIR}" "${HTTPD_CONF_DIR}" \
+    "${HTTPD_CONF_DIR_D}" "${DNSMASQ_CONF_DIR}" "${DNSMASQ_TEMP_DIR}" \
+    "${IRONIC_DB_DIR}" "${IRONIC_GEN_CERT_DIR}" "${DNSMASQ_DATA_DIR}" \
+    "${IRONIC_TMP_DATA_DIR}"
+
+export HTPASSWD_FILE="${IRONIC_CONF_DIR}/htpasswd"
+export LOCAL_DB_URI="sqlite:///${IRONIC_DB_DIR}/ironic.sqlite"
+
+export IRONIC_USE_MARIADB=${IRONIC_USE_MARIADB:-false}
+
+
+get_ip_of_hostname()
+{
+    if [[ "$#" -ne 2 ]]; then
+        echo "${FUNCNAME}: two parameters required, $# provided" >&2
+        return 1
+    fi
+
+    case $2 in
+        4)
+            QUERY="a";;
+        6)
+            QUERY="aaaa";;
+        *)
+            echo "${FUNCNAME}: the second parameter should be [a|aaaa] for A and AAAA records"
+            return 1;;
+    esac
+
+    local HOSTNAME=$1
+
+    echo $(nslookup -type=${QUERY} "${HOSTNAME}" | tail -n2 | grep -w "Address:" | cut -d " " -f2)
+}
+
+get_interface_of_ip()
+{
+    local IP_VERS=""
+
+    if [[ "$#" -gt 2 ]]; then
+        echo "${FUNCNAME}: too many parameters" >&2
+        return 1
+    fi
+
+    if [[ "$#" -eq 2 ]]; then
+        case $2 in
+        4|6)
+            local IP_VERS="-${2}"
+            ;;
+        *)
+            echo "${FUNCNAME}: the second parameter should be [4|6] (or missing for both)" >&2
+            return 2
+            ;;
+        esac
+    fi
+
+    local IP_ADDR=$1
+
+    # Convert the address using ipcalc which strips out the subnet.
+    # For IPv6 addresses, this will give the short-form address
+    IP_ADDR="$(ipcalc "${IP_ADDR}" | grep "^Address:" | awk '{print $2}')"
+
+    echo $(ip ${IP_VERS} -br addr show scope global | grep -i " ${IP_ADDR}/" | cut -f 1 -d ' ' | cut -f 1 -d '@')
+}
+
+get_ip_of_interface()
+{
+    local IP_VERS=""
+
+    if [[ "$#" -gt 2 ]]; then
+        echo "${FUNCNAME}: too many parameters" >&2
+        return 1
+    fi
+
+    if [[ "$#" -eq 2 ]]; then
+        case $2 in
+        4|6)
+            local IP_VERS="-${2}"
+            ;;
+        *)
+            echo "${FUNCNAME}: the second parameter should be [4|6] (or missing for both)" >&2
+            return 2
+            ;;
+        esac
+    fi
+
+    local IFACE=$1
+
+    echo $(ip ${IP_VERS} -br addr show scope global up dev ${IFACE} | awk '{print $3}' | sed -e 's%/.*%%' | head -n 1)
+}
+
+get_provisioning_interface()
+{
+    if [[ -n "$PROVISIONING_INTERFACE" ]]; then
+        # don't override the PROVISIONING_INTERFACE if one is provided
+        echo "$PROVISIONING_INTERFACE"
+        return
+    fi
+
+    local interface=""
+
+    for mac in ${PROVISIONING_MACS//,/ }; do
+        if ip -br link show up | grep -i "$mac" &>/dev/null; then
+            interface="$(ip -br link show up | grep -i "$mac" | cut -f 1 -d ' ' | cut -f 1 -d '@')"
+            break
+        fi
+    done
+
+    echo "$interface"
+}
+
+PROVISIONING_INTERFACE="$(get_provisioning_interface)"
+export PROVISIONING_INTERFACE
+
+export LISTEN_ALL_INTERFACES="${LISTEN_ALL_INTERFACES:-true}"
+
+# Wait for the interface or IP to be up, sets $IRONIC_IP
+wait_for_interface_or_ip()
+{
+    # If $PROVISIONING_IP is specified, then we wait for that to become
+    # available on an interface, otherwise we look at $PROVISIONING_INTERFACE
+    # for an IP
+    if [[ -n "${PROVISIONING_IP}" ]]; then
+        local IFACE_OF_IP=""
+
+        until [[ -n "$IFACE_OF_IP" ]]; do
+            echo "Waiting for ${PROVISIONING_IP} to be configured on an interface..."
+            IFACE_OF_IP="$(get_interface_of_ip "${PROVISIONING_IP}")"
+            sleep 1
+        done
+
+        echo "Found $PROVISIONING_IP on interface \"${IFACE_OF_IP}\"!"
+
+        export PROVISIONING_INTERFACE="$IFACE_OF_IP"
+	# If the IP contains a colon, then it's an IPv6 address
+        if [[ "$PROVISIONING_IP" =~ .*:.* ]]; then
+            export IRONIC_IPV6="$PROVISIONING_IP"
+            export IRONIC_IP=""
+        else
+            export IRONIC_IP="$PROVISIONING_IP"
+        fi
+    elif [[ -n "${IRONIC_IP}" ]]; then
+        if [[ "$IRONIC_IP" =~ .*:.* ]]; then
+            export IRONIC_IPV6="$IRONIC_IP"
+            export IRONIC_IP=""
+        fi
+    elif [[ -n "${PROVISIONING_INTERFACE}" ]]; then
+        until [[ -n "$IRONIC_IPV6" ]] || [[ -n "$IRONIC_IP" ]]; do
+            echo "Waiting for ${PROVISIONING_INTERFACE} interface to be configured..."
+
+            IRONIC_IPV6="$(get_ip_of_interface "${PROVISIONING_INTERFACE}" 6)"
+            sleep 1
+
+            IRONIC_IP="$(get_ip_of_interface "${PROVISIONING_INTERFACE}" 4)"
+            sleep 1
+        done
+
+        if [[ -n "$IRONIC_IPV6" ]]; then
+            echo "Found $IRONIC_IPV6 on interface \"${PROVISIONING_INTERFACE}\"!"
+	    export IRONIC_IPV6
+        fi
+        if [[ -n "$IRONIC_IP" ]]; then
+            echo "Found $IRONIC_IP on interface \"${PROVISIONING_INTERFACE}\"!"
+	    export IRONIC_IP
+        fi
+    elif [[ -n "$IRONIC_URL_HOSTNAME" ]]; then
+        local IPV6_IFACE=""
+        local IPV4_IFACE=""
+        
+        # we should get at least one IP address
+        until [[ -n "$IPV6_IFACE" ]] || [[ -n "$IPV4_IFACE" ]]; do
+            local IPV6_RECORD=""
+            local IPV4_RECORD=""
+
+            IPV6_RECORD="$(get_ip_of_hostname "${IRONIC_URL_HOSTNAME}" 6)"
+            IPV4_RECORD="$(get_ip_of_hostname "${IRONIC_URL_HOSTNAME}" 4)"
+
+            # We couldn't get any IP
+            if [[ -z "$IPV4_RECORD" ]] && [[ -z "$IPV6_RECORD" ]]; then
+                echo "${FUNCNAME}: no valid IP found for hostname ${IRONIC_URL_HOSTNAME}" >&2
+                return 1
+            fi
+
+            echo "Waiting for ${IPV6_RECORD} to be configured on an interface"
+            IPV6_IFACE="$(get_interface_of_ip "${IPV6_RECORD}" 6)"
+            sleep 1
+
+            echo "Waiting for ${IPV4_RECORD} to be configured on an interface"
+            IPV4_IFACE="$(get_interface_of_ip "${IPV4_RECORD}" 4)"
+            sleep 1
+        done
+
+        # Add some debugging output
+        if [[ -n "$IPV6_IFACE" ]]; then
+            echo "Found $IPV6_RECORD on interface \"${IPV6_IFACE}\"!"
+            export IRONIC_IPV6="$IPV6_RECORD"
+        fi
+        if [[ -n "$IPV4_IFACE" ]]; then
+            echo "Found $IPV4_RECORD on interface \"${IPV4_IFACE}\"!"
+            export IRONIC_IP="$IPV4_RECORD"
+        fi
+
+        # Make sure both IPs are asigned to the same interface
+        if [[ -n "$IPV6_IFACE" ]] && [[ -n "$IPV4_IFACE" ]] && [[ "$IPV6_IFACE" != "$IPV4_IFACE" ]]; then
+            echo "Warning, the IPv4 and IPv6 addresses from \"${HOSTNAME}\" are assigned to different " \
+            "interfaces (\"${IPV6_IFACE}\" and \"${IPV4_IFACE}\")" >&2
+        fi
+
+    else
+        echo "Cannot determine an interface or an IP for binding and creating URLs"
+        return 1
+    fi
+
+    # Define the URLs based on the what we have found,
+    # prioritize IPv6 for IRONIC_URL_HOST
+    if [[ -n "$IRONIC_IP" ]]; then
+        export ENABLE_IPV4=yes
+        export IRONIC_URL_HOST="$IRONIC_IP"
+    fi
+    if [[ -n "$IRONIC_IPV6" ]]; then
+        export ENABLE_IPV6=yes
+        export IRONIC_URL_HOST="[${IRONIC_IPV6}]" # The HTTP host needs surrounding with brackets
+    fi
+
+    # Once determined if we have IPv4 and/or IPv6, override the hostname if provided
+    if [[ -n "$IRONIC_URL_HOSTNAME" ]]; then
+        IRONIC_URL_HOST=$IRONIC_URL_HOSTNAME
+    fi
+
+    # Avoid having to construct full URL multiple times while allowing
+    # the override of IRONIC_HTTP_URL for environments in which IRONIC_IP
+    # is unreachable from hosts being provisioned.
+    export IRONIC_HTTP_URL="${IRONIC_HTTP_URL:-http://${IRONIC_URL_HOST}:${HTTP_PORT}}"
+    export IRONIC_TFTP_URL="${IRONIC_TFTP_URL:-tftp://${IRONIC_URL_HOST}}"
+    export IRONIC_BASE_URL=${IRONIC_BASE_URL:-"${IRONIC_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_ACCESS_PORT}"}
+}
+
+render_j2_config()
+{
+    python3.11 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < "$1" > "$2"
+}
+
+run_ironic_dbsync()
+{
+    if [[ "${IRONIC_USE_MARIADB}" == "true" ]]; then
+        # It's possible for the dbsync to fail if mariadb is not up yet, so
+        # retry until success
+        until ironic-dbsync --config-file "${IRONIC_CONF_DIR}/ironic.conf" upgrade; do
+            echo "WARNING: ironic-dbsync failed, retrying"
+            sleep 1
+        done
+    else
+        # SQLite does not support some statements. Fortunately, we can just
+        # create the schema in one go if not already created, instead of going
+        # through an upgrade
+        cp "/var/lib/ironic/ironic.sqlite" "${IRONIC_DB_DIR}/ironic.sqlite"
+        DB_VERSION="$(ironic-dbsync --config-file "${IRONIC_CONF_DIR}/ironic.conf" version)"
+        if [[ "${DB_VERSION}" == "None" ]]; then
+            ironic-dbsync --config-file "${IRONIC_CONF_DIR}/ironic.conf" create_schema
+        fi
+    fi
+}
+
+# Use the special value "unix" for unix sockets
+export IRONIC_PRIVATE_PORT=${IRONIC_PRIVATE_PORT:-unix}
+
+export IRONIC_ACCESS_PORT=${IRONIC_ACCESS_PORT:-6385}
+export IRONIC_LISTEN_PORT=${IRONIC_LISTEN_PORT:-$IRONIC_ACCESS_PORT}
+
+export IRONIC_ENABLE_DISCOVERY=${IRONIC_ENABLE_DISCOVERY:-${IRONIC_INSPECTOR_ENABLE_DISCOVERY:-false}}

ironic-image/scripts/ironic-probe.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+set -eu -o pipefail
+
+# shellcheck disable=SC1091
+. /bin/ironic-common.sh
+# shellcheck disable=SC1091
+. /bin/auth-common.sh
+
+PROBE_CURL_ARGS=
+if [[ "${IRONIC_REVERSE_PROXY_SETUP}" == "true" ]]; then
+    if [[ "${IRONIC_PRIVATE_PORT}" == "unix" ]]; then
+        PROBE_URL="http://127.0.0.1:6385"
+        PROBE_CURL_ARGS="--unix-socket /shared/ironic.sock"
+    else
+        PROBE_URL="http://127.0.0.1:${IRONIC_PRIVATE_PORT}"
+    fi
+else
+        PROBE_URL="${IRONIC_BASE_URL}"
+fi
+
+# shellcheck disable=SC2086
+curl -sSf ${PROBE_CURL_ARGS} "${PROBE_URL}"

ironic-image/scripts/rundatabase-upgrade

@@ -0,0 +1,10 @@
+#!/usr/bin/bash
+
+set -euxo pipefail
+
+# shellcheck disable=SC1091
+. /bin/configure-ironic.sh
+
+# NOTE(dtantsur): no retries here: this script is supposed to be run as a Job
+# that is retried on failure.
+exec ironic-dbsync --config-file "${IRONIC_CONF_DIR}/ironic.conf" upgrade

ironic-image/scripts/rundnsmasq

@@ -13,7 +13,11 @@ export DNS_PORT=${DNS_PORT:-0}
 
 wait_for_interface_or_ip
 if [[ "${DNS_IP:-}" == "provisioning" ]]; then
-    export DNS_IP="$IRONIC_URL_HOST"
+    if [[ "${IPV}" == "4" ]]; then
+      export DNS_IP="${IRONIC_IP}"
+    else
+      export DNS_IP="[${IRONIC_IP}]"
+    fi
 fi
 
 mkdir -p /shared/tftpboot
@@ -32,12 +36,12 @@ fi
 # Template and write dnsmasq.conf
 # we template via /tmp as sed otherwise creates temp files in /etc directory
 # where we can't write
-python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' </etc/dnsmasq.conf.j2 >/tmp/dnsmasq.conf
+python3.11 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' <"/tmp/dnsmasq.conf.j2" >"${DNSMASQ_TEMP_DIR}/dnsmasq_temp.conf"
 
 for iface in $(echo "$DNSMASQ_EXCEPT_INTERFACE" | tr ',' ' '); do
-    sed -i -e "/^interface=.*/ a\except-interface=${iface}" /tmp/dnsmasq.conf
+    sed -i -e "/^interface=.*/ a\except-interface=${iface}" "${DNSMASQ_TEMP_DIR}/dnsmasq_temp.conf"
 done
-cat /tmp/dnsmasq.conf > /etc/dnsmasq.conf
-rm /tmp/dnsmasq.conf
+cat "${DNSMASQ_TEMP_DIR}/dnsmasq_temp.conf" > "${DNSMASQ_CONF_DIR}/dnsmasq.conf"
+rm "${DNSMASQ_TEMP_DIR}/dnsmasq_temp.conf"
 
-exec /usr/sbin/dnsmasq -d -q -C /etc/dnsmasq.conf
+exec /usr/sbin/dnsmasq -d -q -C "${DNSMASQ_CONF_DIR}/dnsmasq.conf"

ironic-image/scripts/runhttpd

@@ -28,25 +28,29 @@ wait_for_interface_or_ip
 mkdir -p /shared/html
 chmod 0777 /shared/html
 
-IRONIC_BASE_URL="${IRONIC_SCHEME}://${IRONIC_URL_HOST}"
-
-INSPECTOR_EXTRA_ARGS=" ipa-inspection-callback-url=${IRONIC_BASE_URL}:${IRONIC_ACCESS_PORT}/v1/continue_inspection"
+INSPECTOR_EXTRA_ARGS=" ipa-inspection-callback-url=${IRONIC_BASE_URL}/v1/continue_inspection"
 
 if [[ "$IRONIC_FAST_TRACK" == "true" ]]; then
-    INSPECTOR_EXTRA_ARGS+=" ipa-api-url=${IRONIC_BASE_URL}:${IRONIC_ACCESS_PORT}"
+    INSPECTOR_EXTRA_ARGS+=" ipa-api-url=${IRONIC_BASE_URL}"
 fi
 export INSPECTOR_EXTRA_ARGS
 
 # Copy files to shared mount
 render_j2_config /tmp/inspector.ipxe.j2 /shared/html/inspector.ipxe
 cp /tmp/uefi_esp*.img /shared/html/
+# cp -r /etc/httpd/* "${HTTPD_DIR}"
+if [[ -f "${HTTPD_CONF_DIR}/httpd.conf" ]]; then
+    mv "${HTTPD_CONF_DIR}/httpd.conf" "${HTTPD_CONF_DIR}/httpd.conf.example"
+fi
 
 # Render the core httpd config
-render_j2_config /etc/httpd/conf/httpd.conf.j2 /etc/httpd/conf/httpd.conf
+render_j2_config "/etc/httpd/conf/httpd.conf.j2" \
+    "${HTTPD_CONF_DIR}/httpd.conf"
 
 if [[ "$IRONIC_TLS_SETUP" == "true" ]]; then
     if [[ "${IRONIC_REVERSE_PROXY_SETUP}" == "true" ]]; then
-        render_j2_config /tmp/httpd-ironic-api.conf.j2 /etc/httpd/conf.d/ironic.conf
+        render_j2_config "/tmp/httpd-ironic-api.conf.j2" \
+            "${HTTPD_CONF_DIR_D}/ironic.conf"
     fi
 else
     export IRONIC_REVERSE_PROXY_SETUP="false" # If TLS is not used, we have no reason to use the reverse proxy
@@ -56,33 +60,24 @@ write_htpasswd_files
 
 # Render httpd TLS configuration for /shared/html/<redifsh;ilo>
 if [[ "$IRONIC_VMEDIA_TLS_SETUP" == "true" ]]; then
-    render_j2_config /etc/httpd-vmedia.conf.j2 /etc/httpd/conf.d/vmedia.conf
+    render_j2_config "/tmp/httpd-vmedia.conf.j2" \
+        "${HTTPD_CONF_DIR_D}/vmedia.conf"
 fi
 
 # Render httpd TLS configuration for /shared/html
 if [[ "$IPXE_TLS_SETUP" == "true" ]]; then
     mkdir -p /shared/html/custom-ipxe
     chmod 0777 /shared/html/custom-ipxe
-    render_j2_config "/etc/httpd-ipxe.conf.j2" "/etc/httpd/conf.d/ipxe.conf"
+    render_j2_config "/tmp/httpd-ipxe.conf.j2" "${HTTPD_CONF_DIR_D}/ipxe.conf"
     cp "${IPXE_CUSTOM_FIRMWARE_DIR}/undionly.kpxe" \
        "${IPXE_CUSTOM_FIRMWARE_DIR}/snponly.efi" \
        "/shared/html/custom-ipxe"
 fi
 
 # Set up inotify to kill the container (restart) whenever cert files for ironic api change
-if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
-        kill -WINCH $(pgrep httpd)
-    done &
-fi
+configure_restart_on_certificate_update "${IRONIC_TLS_SETUP}" httpd "${IRONIC_CERT_FILE}"
 
 # Set up inotify to kill the container (restart) whenever cert of httpd for /shared/html/<redifsh;ilo> path change
-if [[ "$IRONIC_VMEDIA_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_VMEDIA_CERT_FILE}" | while read -r file event; do
-        kill -WINCH $(pgrep httpd)
-    done &
-fi
+configure_restart_on_certificate_update "${IRONIC_VMEDIA_TLS_SETUP}" httpd "${IRONIC_VMEDIA_CERT_FILE}"
 
-exec /usr/sbin/httpd -DFOREGROUND -f /etc/httpd/conf/httpd.conf
+exec /usr/sbin/httpd -DFOREGROUND -f "${HTTPD_CONF_DIR}/httpd.conf"

ironic-image/scripts/runironic

@@ -0,0 +1,18 @@
+#!/usr/bin/bash
+
+# shellcheck disable=SC1091
+. /bin/configure-ironic.sh
+
+# Ramdisk logs
+mkdir -p /shared/log/ironic/deploy
+
+# Allows skipping dbsync if it's done by an external job
+if [[ "${IRONIC_SKIP_DBSYNC:-false}" != true ]]; then
+    run_ironic_dbsync
+fi
+
+configure_restart_on_certificate_update "${IRONIC_TLS_SETUP}" ironic "${IRONIC_CERT_FILE}"
+
+configure_ironic_auth
+
+exec /usr/bin/ironic --config-dir "${IRONIC_CONF_DIR}"

ironic-image/scripts/runlogwatch.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/bash
+
+# Ramdisk logs path
+LOG_DIR="/shared/log/ironic/deploy"
+
+mkdir -p "${LOG_DIR}"
+
+# shellcheck disable=SC2034
+python3.11 -m pyinotify --raw-format -e IN_CLOSE_WRITE -v "${LOG_DIR}" |
+    while read -r event dir mask maskname filename filepath pathname wd; do
+        #NOTE(elfosardo): a pyinotify event looks like this:
+        # <Event dir=False mask=0x8 maskname=IN_CLOSE_WRITE name=mylogs.gzip path=/shared/log/ironic/deploy pathname=/shared/log/ironic/deploy/mylogs.gzip wd=1 >
+        FILENAME=$(echo "${filename}" | cut -d'=' -f2-)
+        echo "************ Contents of ${LOG_DIR}/${FILENAME} ramdisk log file bundle **************"
+        tar -xOzvvf "${LOG_DIR}/${FILENAME}" | sed -e "s/^/${FILENAME}: /"
+        rm -f "${LOG_DIR}/${FILENAME}"
+    done

ironic-image/scripts/runonline-data-migrations

@@ -0,0 +1,10 @@
+#!/usr/bin/bash
+
+set -euxo pipefail
+
+# shellcheck disable=SC1091
+. /bin/configure-ironic.sh
+
+# NOTE(dtantsur): no retries here: this script is supposed to be run as a Job
+# that is retried on failure.
+exec ironic-dbsync --config-file "${IRONIC_CONF_DIR}/ironic.conf" online_data_migrations

ironic-image/scripts/tls-common.sh

@@ -95,3 +95,21 @@ if [[ -f "$MARIADB_CACERT_FILE" ]]; then
 else
     export MARIADB_TLS_ENABLED="false"
 fi
+
+configure_restart_on_certificate_update()
+{
+    local enabled="$1"
+    local service="$2"
+    local cert_file="$3"
+    local signal="TERM"
+
+    if [[ "${enabled}" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
+        if [[ "${service}" == httpd ]]; then
+            signal="WINCH"
+        fi
+        python3 -m pyinotify --raw-format -e IN_DELETE_SELF -v "${cert_file}" |
+            while read -r; do
+                pkill "-${signal}" "${service}"
+            done &
+    fi
+}

ironic-ipa-downloader-image/Dockerfile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.7
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.8
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -18,11 +18,11 @@ FROM micro AS final
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Based Ironic IPA Downloader Container Image"
 LABEL org.opencontainers.image.description="ironic-ipa-downloader based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="3.0.6"
+LABEL org.opencontainers.image.version="3.0.8"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.7-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.8-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/Dockerfile.aarch64

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.7
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.8
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -18,11 +18,11 @@ FROM micro AS final
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Based Ironic IPA Downloader Container Image"
 LABEL org.opencontainers.image.description="ironic-ipa-downloader based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="3.0.6"
+LABEL org.opencontainers.image.version="3.0.8"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.7-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.8-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/Dockerfile.x86_64

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.7
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.8
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -18,11 +18,11 @@ FROM micro AS final
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE Based Ironic IPA Downloader Container Image"
 LABEL org.opencontainers.image.description="ironic-ipa-downloader based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="3.0.6"
+LABEL org.opencontainers.image.version="3.0.8"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.7-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.8-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/get-resource.sh

@@ -6,6 +6,8 @@ export http_proxy=${http_proxy:-$HTTP_PROXY}
 export https_proxy=${https_proxy:-$HTTPS_PROXY}
 export no_proxy=${no_proxy:-$NO_PROXY}
 
+IMAGES_BASE_PATH="/srv/tftpboot/openstack-ironic-image"
+
 if [ -d "/tmp/ironic-certificates" ]; then
   sha256sum /tmp/ironic-certificates/* > /tmp/certificates.sha256
   if cmp "/shared/certificates.sha256" "/tmp/certificates.sha256"; then
@@ -26,14 +28,14 @@ if [ -z "${IPA_BASEURI}" ]; then
   IMAGE_CHANGED=1
   # SLES BASED IPA - ironic-ipa-ramdisk-x86_64 and ironic-ipa-ramdisk-aarch64 packages
   mkdir -p /shared/html/images
-  if [ -f /tmp/initrd-x86_64.zst ]; then
-    cp /tmp/initrd-x86_64.zst /shared/html/images/ironic-python-agent-x86_64.initramfs
-    cp /tmp/openstack-ironic-image.x86_64*.kernel /shared/html/images/ironic-python-agent-x86_64.kernel
+  if [ -f ${IMAGES_BASE_PATH}/initrd-x86_64.zst ]; then
+    cp ${IMAGES_BASE_PATH}/initrd-x86_64.zst /shared/html/images/ironic-python-agent-x86_64.initramfs
+    cp ${IMAGES_BASE_PATH}/openstack-ironic-image.x86_64*.kernel /shared/html/images/ironic-python-agent-x86_64.kernel
   fi
   # Use arm64 as destination for iPXE compatibility
-  if [ -f /tmp/initrd-aarch64.zst ]; then
-    cp /tmp/initrd-aarch64.zst /shared/html/images/ironic-python-agent-arm64.initramfs
-    cp /tmp/openstack-ironic-image.aarch64*.kernel /shared/html/images/ironic-python-agent-arm64.kernel
+  if [ -f ${IMAGES_BASE_PATH}/initrd-aarch64.zst ]; then
+    cp ${IMAGES_BASE_PATH}/initrd-aarch64.zst /shared/html/images/ironic-python-agent-arm64.initramfs
+    cp ${IMAGES_BASE_PATH}/openstack-ironic-image.aarch64*.kernel /shared/html/images/ironic-python-agent-arm64.kernel
   fi
 
   cp /tmp/images.sha256 /shared/images.sha256

kube-rbac-proxy-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%kube-rbac-proxy:%%kube-rbac-proxy_version%%
 #!BuildTag: %%IMG_PREFIX%%kube-rbac-proxy:%%kube-rbac-proxy_version%%-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

kube-rbac-proxy/_service

@@ -2,7 +2,7 @@
  <service name="obs_scm">
     <param name="url">https://github.com/brancz/kube-rbac-proxy</param>
     <param name="scm">git</param>
-    <param name="revision">v0.18.1</param>
+    <param name="revision">v0.18.2</param>
     <param name="version">_auto_</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="changesgenerate">enable</param>

kube-rbac-proxy/kube-rbac-proxy.spec

@@ -17,8 +17,8 @@
 
 
 Name:           kube-rbac-proxy
-Version:        0.18.1
-Release:        0.18.1
+Version:        0.18.2
+Release:        0.18.2
 Summary:        The kube-rbac-proxy is a small HTTP proxy for a single upstream
 License:        Apache-2.0
 URL:            https://github.com/brancz/kube-rbac-proxy

kubectl-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%kubectl:1.32.4
 #!BuildTag: %%IMG_PREFIX%%kubectl:1.32.4-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2-%RELEASE%
 annotations:

metal3-chart/Chart.yaml

@@ -1,28 +1,28 @@
-#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.7_up0.11.5
-#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.7_up0.11.5-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.12_up0.12.2
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.12_up0.12.2-%RELEASE%
 apiVersion: v2
-appVersion: 0.11.5
+appVersion: 0.12.2
 dependencies:
 - alias: metal3-baremetal-operator
   name: baremetal-operator
   repository: file://./charts/baremetal-operator
-  version: 0.9.2
+  version: 0.9.4
 - alias: metal3-ironic
   name: ironic
   repository: file://./charts/ironic
-  version: 0.10.5
+  version: 0.11.2
 - alias: metal3-mariadb
   condition: global.enable_mariadb
   name: mariadb
   repository: file://./charts/mariadb
-  version: 0.5.4
+  version: 0.6.1
 - alias: metal3-media
   condition: global.enable_metal3_media_server
   name: media
   repository: file://./charts/media
-  version: 0.6.2
+  version: 0.6.5
 description: A Helm chart that installs all of the dependencies needed for Metal3
 icon: https://github.com/cncf/artwork/raw/master/projects/metal3/icon/color/metal3-icon-color.svg
 name: metal3
 type: application
-version: "%%CHART_MAJOR%%.0.7+up0.11.5"
+version: "%%CHART_MAJOR%%.0.12+up0.12.2"

metal3-chart/charts/baremetal-operator/Chart.yaml

@@ -3,4 +3,4 @@ appVersion: 0.9.1
 description: A Helm chart for baremetal-operator, used by Metal3
 name: baremetal-operator
 type: application
-version: 0.9.2
+version: 0.9.4

metal3-chart/charts/baremetal-operator/templates/_helpers.tpl

@@ -61,3 +61,19 @@ Create the name of the service account to use
 {{- default "default" .Values.serviceAccount.name }}
 {{- end }}
 {{- end }}
+
+{{/*
+Create the URL to use for connecting to the Ironic servers (e.g. API, cache)
+*/}}
+{{- define "baremetal-operator.ironicHttpHost" -}}
+{{- $hostIP := include "metal3.hostIP" . -}}
+{{- with .Values.global }}
+{{- if .provisioningHostname }}
+{{- .provisioningHostname }}
+{{- else if regexMatch ".*:.*" $hostIP}}
+{{- print "[" $hostIP "]" }}
+{{- else }}
+{{- $hostIP }}
+{{- end }}
+{{- end }}
+{{- end }}

metal3-chart/charts/baremetal-operator/templates/configmap-ironic.yaml

@@ -1,10 +1,10 @@
   {{- $enableTLS := .Values.global.enable_tls }}
   {{- $enableVMediaTLS := .Values.global.enable_vmedia_tls }}
   {{- $protocol := ternary "https" "http" $enableTLS }}
-  {{- $ironicIP := .Values.global.ironicIP | default "" }}
-  {{- $ironicApiHost := print $ironicIP ":6385" }}
-  {{- $ironicBootHost := print $ironicIP ":6180" }}
-  {{- $ironicCacheHost := print $ironicIP ":6180" }}
+  {{- $ironicHost := include "baremetal-operator.ironicHttpHost" . | required "Missing host information for BMO to connect to Ironic" }}
+  {{- $ironicApiHost := print $ironicHost ":6385" }}
+  {{- $ironicBootHost := print $ironicHost ":6180" }}
+  {{- $ironicCacheHost := print $ironicHost ":6180" }}
   {{- $deployArch := .Values.global.deployArchitecture }}
 
 apiVersion: v1
@@ -12,8 +12,8 @@ data:
   IRONIC_ENDPOINT: "{{ $protocol }}://{{ $ironicApiHost }}/v1/"
   # Switch VMedia to HTTP if enable_vmedia_tls is false
   {{- if and $enableTLS $enableVMediaTLS }}
-    {{- $ironicBootHost = print $ironicIP ":" .Values.global.vmediaTLSPort }}
-    {{- $ironicCacheHost = print $ironicIP ":" .Values.global.vmediaTLSPort }}
+    {{- $ironicBootHost = print $ironicHost ":" .Values.global.vmediaTLSPort }}
+    {{- $ironicCacheHost = print $ironicHost ":" .Values.global.vmediaTLSPort }}
     {{- $protocol = "https" }}
   RESTART_CONTAINER_CERTIFICATE_UPDATED: "true"
   {{- else }}

metal3-chart/charts/baremetal-operator/templates/metrics_service.yaml

@@ -6,6 +6,7 @@ metadata:
     control-plane: controller-manager
   name: {{ include "baremetal-operator.fullname" . }}-controller-manager-metrics-service
 spec:
+  ipFamilyPolicy: PreferDualStack
   ports:
   - name: https
     port: 8443

metal3-chart/charts/baremetal-operator/templates/service-webhook.yaml

@@ -5,6 +5,7 @@ metadata:
     {{- include "baremetal-operator.labels" . | nindent 4 }}
   name: {{ include "baremetal-operator.fullname" . }}-webhook-service
 spec:
+  ipFamilyPolicy: PreferDualStack
   ports:
   - port: 443
     targetPort: 9443

metal3-chart/charts/ironic/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
-appVersion: 26.1.2
+appVersion: 29.0.4
 description: A Helm chart for Ironic, used by Metal3
 name: ironic
 type: application
-version: 0.10.5
+version: 0.11.2

metal3-chart/charts/ironic/templates/_helpers.tpl

@@ -83,3 +83,50 @@ Get ironic CA volumeMounts
   readOnly: true
 {{- end }}
 {{- end }}
+
+{{/*
+Get the formatted "External" hostname or IP based URL
+*/}}
+{{- define "ironic.externalHttpUrl" }}
+{{- $host := ternary (include "metal3.hostIP" .) .Values.global.externalHttpHost (empty .Values.global.externalHttpHost) }}
+{{- if regexMatch ".*:.*" $host }}
+{{- $host = print "[" $host "]" }}
+{{- end }}
+{{- $protocol := "http" }}
+{{- $port := "6180" }}
+{{- if .Values.global.enable_vmedia_tls }}
+{{- $protocol = "https" }}
+{{- $port = .Values.global.vmediaTLSPort | default "6185" }}
+{{- end }}
+{{- print $protocol "://" $host ":" $port }}
+{{- end }}
+
+{{/*
+Get the command to use for Liveness and Readiness probes
+*/}}
+{{- define "ironic.probeCommand" }}
+{{- $host := "127.0.0.1" }}
+{{- if eq .Values.listenOnAll false }}
+{{- $host = coalesce .Values.global.provisioningIP .Values.global.ironicIP .Values.global.provisioningHostname }}
+{{- if regexMatch ".*:.*" $host }}
+{{- $host = print "[" $host "]" }}
+{{- end }}
+{{- end }}
+{{- print "curl -sSfk https://" $host ":6385" }}
+{{- end }}
+
+{{/*
+Create the subjectAltNames section to be set on the Certificate
+*/}}
+{{- define "ironic.subjectAltNames" -}}
+{{- with .Values.global }}
+{{- if .provisioningHostname }}
+dnsNames:
+- {{ .provisioningHostname }}
+{{- end -}}
+{{- if or .ironicIP .provisioningIP }}
+ipAddresses:
+  - {{ coalesce .provisioningIP .ironicIP }}
+{{- end }}
+{{- end }}
+{{- end }}

metal3-chart/charts/ironic/templates/certificates.yaml

@@ -6,8 +6,7 @@ metadata:
 spec:
   commonName: ironic-ca
   isCA: true
-  ipAddresses:
-  - {{ .Values.global.ironicIP }}
+  {{- include "ironic.subjectAltNames" . | indent 2 }}
   issuerRef:
     kind: Issuer
     name: selfsigned-issuer
@@ -19,8 +18,7 @@ metadata:
   name: ironic-cert
 spec:
   commonName: ironic-cert
-  ipAddresses:
-  - {{ .Values.global.ironicIP }}
+  {{- include "ironic.subjectAltNames" . | indent 2 }}
   issuerRef:
     kind: Issuer
     name: ca-issuer
@@ -33,8 +31,7 @@ metadata:
   name: ironic-vmedia-cert
 spec:
   commonName: ironic-vmedia-cert
-  ipAddresses:
-  - {{ .Values.global.ironicIP }}
+  {{- include "ironic.subjectAltNames" . | indent 2 }}
   issuerRef:
     kind: Issuer
     name: ca-issuer

metal3-chart/charts/ironic/templates/configmap.yaml

@@ -1,21 +1,13 @@
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: ironic-bmo
+  name: ironic
   labels:
     {{- include "ironic.labels" . | nindent 4 }}
 data:
-  {{- $enableTLS := .Values.global.enable_tls }}
-  {{- $enableVMediaTLS := .Values.global.enable_vmedia_tls }}
-  {{- $protocol := ternary "https" "http" $enableTLS }}
-  {{- $ironicIP := .Values.global.ironicIP | default "" }}
-  {{- $ironicApiHost := print $ironicIP ":6385" }}
-  {{- $ironicBootHost := print $ironicIP ":6180" }}
-  {{- $ironicCacheHost := print $ironicIP ":6180" }}
   {{- $deployArch := .Values.global.deployArchitecture }}
 
   {{- if  ( .Values.global.enable_dnsmasq ) }}
-  DNSMASQ_BOOT_SERVER_ADDRESS: {{ $ironicBootHost }}
   DNSMASQ_DNS_SERVER_ADDRESS: {{ .Values.global.dnsmasqDNSServer }}
   DNSMASQ_DEFAULT_ROUTER: {{ .Values.global.dnsmasqDefaultRouter }}
   DHCP_RANGE: {{ .Values.global.dhcpRange }}
@@ -25,40 +17,21 @@ data:
   {{- end }}
   HTTP_PORT: "6180"
   PREDICTABLE_NIC_NAMES: "{{ .Values.global.predictableNicNames }}"
-  USE_IRONIC_INSPECTOR: "false"
-  IRONIC_API_BASE_URL: {{ $protocol }}://{{ $ironicApiHost }}
-  IRONIC_API_HOST: {{ $ironicApiHost }}
-  IRONIC_API_HTTPD_SERVER_NAME: {{ $ironicApiHost }}
-  IRONIC_ENDPOINT: {{ $protocol }}://{{ $ironicApiHost }}/v1/
-  # Switch VMedia to HTTP if enable_vmedia_tls is false
-  {{- if and $enableTLS $enableVMediaTLS }}
-    {{- $ironicBootHost = print $ironicIP ":" .Values.global.vmediaTLSPort }}
-    {{- $ironicCacheHost = print $ironicIP ":" .Values.global.vmediaTLSPort }}
-    {{- $protocol = "https" }}
-  {{- else }}
-    {{- $protocol = "http" }}
-  {{- end }}
-  IRONIC_EXTERNAL_HTTP_URL: {{ $protocol }}://{{ $ironicCacheHost }}
-  CACHEURL: {{ $protocol }}://{{ $ironicCacheHost }}/images
-  DEPLOY_KERNEL_URL: {{ $protocol }}://{{ $ironicBootHost }}/images/ironic-python-agent-{{ $deployArch }}.kernel
-  DEPLOY_RAMDISK_URL: {{ $protocol }}://{{ $ironicBootHost }}/images/ironic-python-agent-{{ $deployArch }}.initramfs
+  IRONIC_EXTERNAL_HTTP_URL: {{ include "ironic.externalHttpUrl" . }}
   DEPLOY_ARCHITECTURE: {{ $deployArch }}
-  IRONIC_BOOT_BASE_URL: {{ $protocol }}://{{ $ironicBootHost }}
-  IRONIC_VMEDIA_HTTPD_SERVER_NAME: {{ $ironicBootHost }}
   ENABLE_PXE_BOOT: "{{ .Values.global.enable_pxe_boot }}"
   {{- if .Values.global.provisioningInterface }}
   PROVISIONING_INTERFACE: {{ .Values.global.provisioningInterface }}
   {{- end }}
   {{- if .Values.global.provisioningIP }}
-  PROVISIONING_IP: {{ .Values.global.provisioningIP }}
+  PROVISIONING_IP: {{ include "metal3.hostIP" . }}
+  {{- else if .Values.global.ironicIP }}
+  IRONIC_IP: {{ include "metal3.hostIP" . }}
+  {{- else if .Values.global.provisioningHostname }}
+  IRONIC_URL_HOSTNAME: {{ .Values.global.provisioningHostname }}
   {{- end }}
-  IRONIC_ILO_USE_SWIFT: "false"
-  IRONIC_ILO_USE_WEB_SERVER_FOR_IMAGES: "true"
   IRONIC_FAST_TRACK: "true"
-  LISTEN_ALL_INTERFACES: "true"
-  {{- if .Values.global.ironicIP }}
-  IRONIC_IP: {{ .Values.global.ironicIP }}
-  {{- end }}
+  LISTEN_ALL_INTERFACES: "{{ .Values.listenOnAll }}"
   {{- if  ( .Values.global.enable_tls ) }}
   RESTART_CONTAINER_CERTIFICATE_UPDATED: "true"
   IRONIC_KERNEL_PARAMS: {{ .Values.global.ironicKernelParams }} tls.enabled=true

metal3-chart/charts/ironic/templates/deployment.yaml

@@ -39,10 +39,10 @@ spec:
         - /bin/runhttpd
         envFrom:
         - configMapRef:
-            name: ironic-bmo
+            name: ironic
         livenessProbe:
           exec:
-            command: ["sh", "-c", "curl -sSfk https://127.0.0.1:6385"]
+            command: ["sh", "-c", "{{ include "ironic.probeCommand" . }}"]
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
@@ -60,7 +60,7 @@ spec:
         {{- end }}
         readinessProbe:
           exec:
-            command: ["sh", "-c", "curl -sSfk https://127.0.0.1:6385"]
+            command: ["sh", "-c", "{{ include "ironic.probeCommand" . }}"]
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
@@ -97,7 +97,7 @@ spec:
         - /bin/runironic
         envFrom:
         - configMapRef:
-            name: ironic-bmo
+            name: ironic
         env:
         {{- if .Values.global.enable_basicAuth }}
         - name: IRONIC_HTPASSWD
@@ -170,7 +170,7 @@ spec:
         - /bin/rundnsmasq
         envFrom:
         - configMapRef:
-            name: ironic-bmo
+            name: ironic
         livenessProbe:
           exec:
             command:

metal3-chart/charts/ironic/templates/service.yaml

@@ -10,6 +10,7 @@ metadata:
   {{- end }}
 spec:
   type: {{ .Values.service.type }}
+  ipFamilyPolicy: PreferDualStack
   ports:
   {{- $enableTLS := .Values.global.enable_tls }}
   {{- $enableVMediaTLS := .Values.global.enable_vmedia_tls }}

metal3-chart/charts/ironic/values.yaml

@@ -32,6 +32,12 @@ global:
   # IP Address assigned to network interface on provisioning network
   provisioningIP: ""
 
+  # Fully Qualified Domain Name used by Ironic for both binding (to the
+  # associated IPv4 and/or IPv6 addresses) and exposing the API, dnsmask and
+  # media, also used by BMO. Note, this is the only way to enable a fully
+  # working dual-stack configuration.
+  provisioningHostname: ""
+
   # Whether the NIC names should be predictable or not
   predictableNicNames: "true"
 
@@ -52,15 +58,17 @@ global:
 
 replicaCount: 1
 
+listenOnAll: true
+
 images:
   ironic:
     repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/ironic
     pullPolicy: IfNotPresent
-    tag: 26.1.2.4
+    tag: 29.0.4.1
   ironicIPADownloader:
     repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/ironic-ipa-downloader
     pullPolicy: IfNotPresent
-    tag: 3.0.7
+    tag: 3.0.8
 
 nameOverride: ""
 fullnameOverride: ""

metal3-chart/charts/mariadb/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
-appVersion: 10.6.7
+appVersion: "10.11"
 description: A Helm chart for MariaDB, used by Metal3
 name: mariadb
 type: application
-version: 0.5.4
+version: 0.6.1

metal3-chart/charts/mariadb/templates/configmap-mariadb.yaml

@@ -0,0 +1,13 @@
+apiVersion: v1
+kind: ConfigMap 
+metadata:
+  name: mariadb-config
+  labels:
+    {{- include "mariadb.labels" . | nindent 4 }}
+data:
+  ironic.conf: |
+    [mariadb]
+    max_connections 64
+    max_heap_table_size 1M
+    innodb_buffer_pool_size 5M
+    innodb_log_buffer_size 512K

metal3-chart/charts/mariadb/templates/configmap.yaml

@@ -5,4 +5,7 @@ metadata:
   labels:
     {{- include "mariadb.labels" . | nindent 4 }}
 data:
-  RESTART_CONTAINER_CERTIFICATE_UPDATED: "false"
+  MARIADB_USER: ironic
+  MARIADB_RANDOM_ROOT_PASSWORD: "yes"
+  MARIADB_DATABASE: ironic
+  MARIADB_AUTO_UPGRADE: "yes"

metal3-chart/charts/mariadb/templates/deployment.yaml

@@ -25,23 +25,50 @@ spec:
       serviceAccountName: {{ include "mariadb.serviceAccountName" . }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      initContainers:
+      # This would run during entrypoint if run as root
+      - name: set-volume-owners
+        image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+            runAsUser: 0
+            allowPrivilegeEscalation: true
+            capabilities:
+              drop:
+              - ALL
+              add:
+              - CHOWN
+              - FOWNER
+              - DAC_OVERRIDE
+            seccompProfile:
+              type: RuntimeDefault
+        volumeMounts:
+          - name: mariadb-conf
+            mountPath: /etc/mysql/conf.d
+          - name: mariadb-run
+            mountPath: /run/mysql
+          {{- $volmounts }}
+        command: ['bash', '-c', 'source /usr/local/bin/docker-entrypoint.sh && docker_create_db_directories']
+        env:
+          - name: DATADIR
+            value: /var/lib/mysql
+          - name: SOCKET
+            value: /run/mysql/mysql.sock
       containers:
       - name: mariadb
         image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
+        envFrom:
+          - configMapRef:
+              name: mariadb-cm
         env:
           - name: MARIADB_PASSWORD
             valueFrom:
               secretKeyRef:
                 key: password
                 name: ironic-mariadb
-          - name: RESTART_CONTAINER_CERTIFICATE_UPDATED
-            valueFrom:
-              configMapKeyRef:
-                name: mariadb-cm
-                key: RESTART_CONTAINER_CERTIFICATE_UPDATED
         lifecycle:
           preStop:
             exec:
@@ -52,9 +79,9 @@ spec:
         livenessProbe:
           exec:
             command:
-              - sh
-              - -c
-              - mysqladmin status -uironic -p$(printenv MARIADB_PASSWORD)
+              - healthcheck.sh
+              - --connect
+              - --innodb_initialized
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
@@ -67,19 +94,29 @@ spec:
         readinessProbe:
           exec:
             command:
-              - sh
-              - -c
-              - mysqladmin status -uironic -p$(printenv MARIADB_PASSWORD)
+              - healthcheck.sh
+              - --connect
+              - --innodb_initialized
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
           successThreshold: 1
           timeoutSeconds: 10
         volumeMounts:
+            - name: mariadb-conf
+              mountPath: /etc/mysql/conf.d
+            - name: mariadb-run
+              mountPath: /run/mysql
             {{- $volmounts }}
       {{- with .Values.global.nodeSelector }}
       nodeSelector:
         {{- toYaml . | nindent 8 }}
       {{- end }}
       volumes:
+        - name: mariadb-conf
+          configMap:
+            name: mariadb-config
+        - name: mariadb-run
+          emptyDir:
+            sizeLimit: 20Mi
         {{- $volumes }}

metal3-chart/charts/mariadb/templates/service.yaml

@@ -5,6 +5,7 @@ metadata:
   labels:
     {{- include "mariadb.labels" . | nindent 4 }}
 spec:
+  ipFamilyPolicy: PreferDualStack
   type: {{ .Values.service.type }}
   selector:
     {{- include "mariadb.selectorLabels" . | nindent 4 }}

metal3-chart/charts/mariadb/values.yaml

@@ -12,9 +12,9 @@ service:
     targetPort: 3306
 
 image:
-  repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/suse/mariadb
+  repository: registry.suse.com/suse/mariadb
   pullPolicy: IfNotPresent
-  tag: 10.6.15.1
+  tag: 10.11
 
 nameOverride: ""
 fullnameOverride: ""
@@ -31,8 +31,8 @@ serviceAccount:
 podAnnotations: {}
 
 podSecurityContext:
-  runAsUser: 10060
-  fsGroup: 10060
+  runAsUser: 60
+  fsGroup: 60
 
 securityContext:
   allowPrivilegeEscalation: false
@@ -60,6 +60,7 @@ persistence:
 volumeMounts:
   - name: mariadb-data-volume
     mountPath: /var/lib/mysql
+    subPath: data
 
 volumes:
   - name: mariadb-data-volume

metal3-chart/charts/media/Chart.yaml

@@ -3,4 +3,4 @@ appVersion: 1.16.0
 description: A Helm chart for Media, used by Metal3
 name: media
 type: application
-version: 0.6.2
+version: 0.6.5

metal3-chart/charts/media/templates/service.yaml

@@ -5,6 +5,7 @@ metadata:
   labels:
     {{- include "media.labels" . | nindent 4 }}
 spec:
+  ipFamilyPolicy: PreferDualStack
   type: {{ .Values.service.type }}
   ports:
     - port: {{ .Values.service.port }}

metal3-chart/charts/media/values.yaml

@@ -24,7 +24,7 @@ replicaCount: 1
 image:
   repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/ironic
   pullPolicy: IfNotPresent
-  tag: 26.1.2.4
+  tag: 29.0.4.1
 
 imagePullSecrets: []
 nameOverride: ""

metal3-chart/templates/_helpers.tpl

@@ -60,3 +60,18 @@ Create the name of the service account to use
 {{- default "default" .Values.serviceAccount.name }}
 {{- end }}
 {{- end }}
+
+{{/*
+Produce the correct IP or hostname for Ironic provisioning
+*/}}
+{{- define "metal3.hostIP" -}}
+{{- with .Values.global }}
+{{- if and .provisioningHostname (or .provisioningIP .ironicIP) }}
+{{  fail "Please provide either provisioningHostname or provisioningIP or ironicIP" }}
+{{- end }}
+{{- if and .provisioningIP .ironicIP }}
+{{  fail "Please provide either ironicIP or provisioningIP" }}
+{{- end }}
+{{- coalesce .provisioningIP .ironicIP }}
+{{- end }}
+{{- end }}

metal3-chart/values.yaml

@@ -60,6 +60,15 @@ global:
   # IP Address assigned to network interface on provisioning network
   provisioningIP: ""
 
+  # Fully Qualified Domain Name used by Ironic for both binding (to the 
+  # associated IPv4 and/or IPv6 addresses) and exposing the API, dnsmask and
+  # media, also used by BMO. Note, this is the only way to enable a fully
+  # working dual-stack configuration.
+  provisioningHostname: ""
+
+  # Hostname or IP for accessing the Ironic API server from a non-provisioning network
+  externalHttpHost: ""
+
   # Name for the MariaDB service
   databaseServiceName: metal3-mariadb
 
@@ -115,8 +124,8 @@ metal3-mariadb:
   persistence:
     storageClass: ""
   image:
-    repository: "registry.suse.com/edge/mariadb"
-    tag: "10.6.15.1"
+    repository: "registry.suse.com/suse/mariadb"
+    tag: "10.11"
 
 #
 # Baremetal Operator

metallb-controller-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%metallb-controller:v%%metallb-controller_version%%
 #!BuildTag: %%IMG_PREFIX%%metallb-controller:v%%metallb-controller_version%%-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

metallb-speaker-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%metallb-speaker:v%%metallb-speaker_version%%
 #!BuildTag: %%IMG_PREFIX%%metallb-speaker:v%%metallb-speaker_version%%-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 

python-pyhelm3/_service

@@ -0,0 +1,3 @@
+<services>
+<service name="download_assets"></service>
+</services>

python-pyhelm3/pyhelm3.spec

@@ -0,0 +1,55 @@
+#
+# spec file for package python-pyhelm3
+#
+# Copyright (c) 2025 SUSE LLC
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
+
+Name:           python-pyhelm3
+Version:        0.4.0
+Release:        0
+Summary:        Python library for managing Helm releases using Helm 3
+License:        Apache-2.0
+URL:            https://github.com/azimuth-cloud/pyhelm3
+#!RemoteAsset
+Source:         https://files.pythonhosted.org/packages/source/p/pyhelm3/pyhelm3-%{version}.tar.gz
+BuildRequires:  python-rpm-macros
+BuildRequires:  %{python_module pip}
+BuildRequires:  %{python_module setuptools >= 42}
+BuildRequires:  %{python_module setuptools_scm >= 3.4}
+BuildRequires:  %{python_module wheel}
+BuildRequires:  fdupes
+Requires:       %{python_module pydantic}
+Requires:       %{python_module PyYAML}
+BuildArch:      noarch
+%python_subpackages
+
+%description
+Python library for managing Helm releases using Helm 3.
+
+%prep
+%autosetup -p1 -n pyhelm3-%{version}
+
+%build
+%pyproject_wheel
+
+%install
+%pyproject_install
+%python_expand %fdupes %{buildroot}%{$python_sitelib}
+
+%files %{python_files}
+%doc README.md
+%license LICENSE
+%{python_sitelib}/pyhelm3
+%{python_sitelib}/pyhelm3-%{version}.dist-info
+
+%changelog

release-manifest-image/Dockerfile

@@ -1,4 +1,4 @@
-#!BuildTag: %%IMG_PREFIX%%release-manifest:3.3.2
+#!BuildTag: %%IMG_PREFIX%%release-manifest:3.4.0
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 
@@ -7,11 +7,11 @@ FROM registry.suse.com/bci/bci-micro:$SLE_VERSION
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SUSE Edge Release Manifest"
 LABEL org.opencontainers.image.description="Release Manifest containing information about a specific SUSE Edge release"
-LABEL org.opencontainers.image.version="3.3.2"
+LABEL org.opencontainers.image.version="3.4.0"
 LABEL org.opencontainers.image.url="https://www.suse.com/solutions/edge-computing/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.3.2"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%release-manifest:3.4.0"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"
@@ -20,4 +20,4 @@ LABEL com.suse.image-type="release-manifest"
 LABEL com.suse.release-stage="released"
 # endlabelprefix
 
-COPY release_manifest.yaml release_manifest.yaml
+COPY release_manifest.yaml release_images.yaml ./

release-manifest-image/_service

@@ -2,6 +2,7 @@
   <service mode="buildtime" name="kiwi_metainfo_helper"/>
   <service name="replace_using_env" mode="buildtime">
     <param name="file">Dockerfile</param>
+    <param name="file">release_images.yaml</param>
     <param name="eval">IMG_PREFIX=$(rpm --macros=/root/.rpmmacros -E %{?img_prefix})</param>
     <param name="var">IMG_PREFIX</param>
     <param name="eval">IMG_REPO=$(rpm --macros=/root/.rpmmacros -E %manifest_repo)</param>

release-manifest-image/release_images.yaml

@@ -0,0 +1,64 @@
+images:
+  - name: quay.io/jetstack/cert-manager-cainjector:v1.14.2
+  - name: quay.io/jetstack/cert-manager-controller:v1.14.2
+  - name: quay.io/jetstack/cert-manager-webhook:v1.14.2
+  - name: registry.rancher.com/rancher/hardened-cluster-autoscaler:v1.10.2-build20250507
+  - name: registry.rancher.com/rancher/hardened-cni-plugins:v1.7.1-build20250509
+  - name: registry.rancher.com/rancher/hardened-coredns:v1.12.1-build20250507
+  - name: registry.rancher.com/rancher/hardened-etcd:v3.5.21-k3s1-build20250411
+  - name: registry.rancher.com/rancher/hardened-k8s-metrics-server:v0.7.2-build20250507
+  - name: registry.rancher.com/rancher/hardened-kubernetes:v1.32.5-rke2r1-build20250515
+  - name: registry.rancher.com/rancher/hardened-multus-cni:v4.2.0-build20250326
+  - name: registry.rancher.com/rancher/klipper-helm:v0.9.5-build20250306
+  - name: registry.rancher.com/rancher/mirrored-cilium-cilium:v1.17.3
+  - name: registry.rancher.com/rancher/mirrored-cilium-operator-generic:v1.17.3
+  - name: registry.rancher.com/rancher/mirrored-longhornio-csi-attacher:v4.8.1
+  - name: registry.rancher.com/rancher/mirrored-longhornio-csi-node-driver-registrar:v2.13.0
+  - name: registry.rancher.com/rancher/mirrored-longhornio-csi-provisioner:v5.2.0
+  - name: registry.rancher.com/rancher/mirrored-longhornio-csi-resizer:v1.13.2
+  - name: registry.rancher.com/rancher/mirrored-longhornio-csi-snapshotter:v8.2.0
+  - name: registry.rancher.com/rancher/mirrored-longhornio-livenessprobe:v2.15.0
+  - name: registry.rancher.com/rancher/mirrored-longhornio-longhorn-engine:v1.8.1
+  - name: registry.rancher.com/rancher/mirrored-longhornio-longhorn-instance-manager:v1.8.1
+  - name: registry.rancher.com/rancher/mirrored-longhornio-longhorn-manager:v1.8.1
+  - name: registry.rancher.com/rancher/mirrored-longhornio-longhorn-share-manager:v1.8.1
+  - name: registry.rancher.com/rancher/mirrored-longhornio-longhorn-ui:v1.8.1
+  - name: registry.rancher.com/rancher/mirrored-sig-storage-snapshot-controller:v8.2.0
+  - name: registry.rancher.com/rancher/neuvector-compliance-config:1.0.4
+  - name: registry.rancher.com/rancher/neuvector-controller:5.4.3
+  - name: registry.rancher.com/rancher/neuvector-enforcer:5.4.3
+  - name: registry.rancher.com/rancher/nginx-ingress-controller:v1.12.1-hardened6
+  - name: registry.rancher.com/rancher/rke2-cloud-provider:v1.32.0-rc3.0.20241220224140-68fbd1a6b543-build20250101
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%baremetal-operator:0.9.1.1
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator:0.3.0
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%ironic-ipa-downloader:3.0.8
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%ironic:26.1.2.5
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%metallb-controller:v0.14.9
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%metallb-speaker:v0.14.9
+  - name: %%IMG_REPO%%/%%IMG_PREFIX%%upgrade-controller:0.1.1
+  - name: registry.rancher.com/rancher/cluster-api-operator:v0.17.0
+  - name: registry.rancher.com/rancher/fleet-agent:v0.12.3
+  - name: registry.rancher.com/rancher/fleet:v0.12.3
+  - name: registry.rancher.com/rancher/hardened-node-feature-discovery:v0.15.7-build20250425
+  - name: registry.rancher.com/rancher/rancher-webhook:v0.7.2
+  - name: registry.rancher.com/rancher/rancher/turtles:v0.20.0
+  - name: registry.rancher.com/rancher/rancher:v2.11.2
+  - name: registry.rancher.com/rancher/shell:v0.4.1
+  - name: registry.rancher.com/rancher/system-upgrade-controller:v0.15.2
+  - name: registry.suse.com/rancher/cluster-api-addon-provider-fleet:v0.10.0
+  - name: registry.suse.com/rancher/cluster-api-controller:v1.9.5
+  - name: registry.suse.com/rancher/cluster-api-provider-metal3:v1.9.3
+  - name: registry.suse.com/rancher/cluster-api-provider-rke2-bootstrap:v0.16.1
+  - name: registry.suse.com/rancher/cluster-api-provider-rke2-controlplane:v0.16.1
+  - name: registry.suse.com/rancher/elemental-operator:1.6.8
+  - name: registry.suse.com/rancher/hardened-sriov-network-operator:v1.5.0-build20250425
+  - name: registry.suse.com/rancher/ip-address-manager:v1.9.4
+  - name: registry.suse.com/suse/sles/15.6/cdi-apiserver:1.61.0-150600.3.12.1
+  - name: registry.suse.com/suse/sles/15.6/cdi-controller:1.61.0-150600.3.12.1
+  - name: registry.suse.com/suse/sles/15.6/cdi-operator:1.61.0-150600.3.12.1
+  - name: registry.suse.com/suse/sles/15.6/cdi-uploadproxy:1.61.0-150600.3.12.1
+  - name: registry.suse.com/suse/sles/15.6/virt-api:1.4.0-150600.5.15.1
+  - name: registry.suse.com/suse/sles/15.6/virt-controller:1.4.0-150600.5.15.1
+  - name: registry.suse.com/suse/sles/15.6/virt-handler:1.4.0-150600.5.15.1
+  - name: registry.suse.com/suse/sles/15.6/virt-launcher:1.4.0-150600.5.15.1
+  - name: registry.suse.com/suse/sles/15.6/virt-operator:1.4.0-150600.5.15.1

release-manifest-image/release_manifest.yaml

@@ -1,13 +1,13 @@
 apiVersion: lifecycle.suse.com/v1alpha1
 kind: ReleaseManifest
 metadata:
-  name: release-manifest-3-3-2
+  name: release-manifest-3-4-0
 spec:
-  releaseVersion: 3.3.2
+  releaseVersion: 3.4.0
   components:
     kubernetes:
       k3s:
-        version: v1.32.5+k3s1
+        version: v1.32.4+k3s1
         coreComponents:
           - name: traefik-crd
             version: 34.2.1+up34.2.0
@@ -31,28 +31,28 @@ spec:
                 image: rancher/mirrored-metrics-server:v0.7.2
             type: Deployment
       rke2:
-        version: v1.32.5+rke2r1
+        version: v1.32.4+rke2r1
         coreComponents:
           - name: rke2-cilium
-            version: 1.17.301
+            version: 1.17.300
             type: HelmChart
           - name: rke2-canal
-            version: v3.30.0-build2025051500
+            version: v3.29.3-build2025040801
             type: HelmChart
           - name: rke2-calico-crd
-            version: v3.30.001
+            version: v3.29.101
             type: HelmChart
           - name: rke2-calico
-            version: v3.30.001
+            version: v3.29.300
             type: HelmChart
           - name: rke2-coredns
-            version: 1.42.000
+            version: 1.39.201
             type: HelmChart
           - name: rke2-ingress-nginx
-            version: 4.12.103
+            version: 4.12.101
             type: HelmChart
           - name: rke2-metrics-server
-            version: 3.12.201
+            version: 3.12.200
             type: HelmChart
           - name: rancher-vsphere-csi
             version: 3.3.1-rancher900
@@ -61,7 +61,7 @@ spec:
             version: 1.10.000
             type: HelmChart
           - name: harvester-cloud-provider
-            version: 0.2.1000
+            version: 0.2.900
             type: HelmChart
           - name: harvester-csi-driver
             version: 0.1.2300
@@ -89,7 +89,7 @@ spec:
         - prettyName: Rancher
           releaseName: rancher
           chart: rancher
-          version: 2.11.3
+          version: 2.11.2
           repository: https://charts.rancher.com/server-charts/prime
           values:
             postDelete:
@@ -97,12 +97,12 @@ spec:
         - prettyName: Longhorn
           releaseName: longhorn
           chart: longhorn
-          version: 106.2.1+up1.8.2
+          version: 106.2.0+up1.8.1
           repository: https://charts.rancher.io
           dependencyCharts:
             - releaseName: longhorn-crd
               chart: longhorn-crd
-              version: 106.2.1+up1.8.2
+              version: 106.2.0+up1.8.1
               repository: https://charts.rancher.io
         - prettyName: MetalLB
           releaseName: metallb
@@ -123,12 +123,12 @@ spec:
         - prettyName: NeuVector
           releaseName: neuvector
           chart: neuvector
-          version: 106.0.2+up2.8.7
+          version: 106.0.1+up2.8.6
           repository: https://charts.rancher.io
           dependencyCharts:
             - releaseName: neuvector-crd
               chart: neuvector-crd
-              version: 106.0.2+up2.8.7
+              version: 106.0.1+up2.8.6
               repository: https://charts.rancher.io
           addonCharts:
             - releaseName: neuvector-ui-ext
@@ -138,7 +138,7 @@ spec:
         - prettyName: EndpointCopierOperator
           releaseName: endpoint-copier-operator
           chart: '%%CHART_REPO%%/%%CHART_PREFIX%%endpoint-copier-operator'
-          version: '%%CHART_MAJOR%%.0.0+up0.2.1'
+          version: '%%CHART_MAJOR%%.0.1+up0.3.0'
         - prettyName: Elemental
           releaseName: elemental-operator
           chart: oci://registry.suse.com/rancher/elemental-operator-chart
@@ -171,7 +171,7 @@ spec:
         - prettyName: Metal3
           releaseName: metal3
           chart: '%%CHART_REPO%%/%%CHART_PREFIX%%metal3'
-          version: '%%CHART_MAJOR%%.0.7+up0.11.5'
+          version: '%%CHART_MAJOR%%.0.12+up0.12.2'
         - prettyName: RancherTurtles
           releaseName: rancher-turtles
           chart: '%%CHART_REPO%%/%%CHART_PREFIX%%rancher-turtles'

upgrade-controller-image/Dockerfile

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #!BuildTag: %%IMG_PREFIX%%upgrade-controller:0.1.1
 #!BuildTag: %%IMG_PREFIX%%upgrade-controller:0.1.1-%RELEASE%
-#!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro