Rather than interning a property name string which isn’t canonicalised,
canonicalise it first, and enforce stricter validation on inputs.
The previous code was not incorrect (since the property machinery would
have canonicalised the property names itself, internally), but would
have resulted in non-canonical property names getting into the GQuark
table unnecessarily. With the new code, the interned property names from
property installation time should be consistently reused.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
Inline with the stricter version of the property naming rules from the
documentation, tighten up the validation of property names at
installation time.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It provides more useful output on failure, and isn’t compiled out when
building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The documentation says that parameter names must be alphanumeric (plus
`-` or `_`) and that canonicalisation turns `_` into `-`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
There’s no need to have the property naming documentation in two places,
with one version of it being stricter than the other. Rationalise it to
one place, link to that consistently, and settle on the stricter
version.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #358
We cannot just call
G_PARAM_SPEC_GET_CLASS (pspec)->value_set_default (pspec, &dflt_value);
without initializing the GValue first. It would call
param_string_set_default(), which would set the pointer value
to a cloned string (which later never gets released, because
the GValue is not known to hold a string).
Fixes: 6ad799ac67
Since we have the type of the GValue we're going to initialize, we can
allow passing an empty (but valid) GValue when retrieving the default
value of a GParamSpec.
This will eliminate additional checks and an unnecessary reset.
If we're cross-compiling, the installed-tests are useful even if we
can't run them on the build machine: we can copy them to the host
machine (possibly via a distro package like Debian's libglib2.0-tests)
and run them there.
While I'm changing the build-tests condition anyway, deduplicate it.
Based on a patch by Helmut Grohne.
Bug-Debian: https://bugs.debian.org/941509
Signed-off-by: Simon McVittie <smcv@collabora.com>
I don’t think these could be hit in practice due to the guarantees of
the type system, but the static analyser doesn’t know that — so make the
assertions clearer to shut it up.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
The static analyser can’t yet work out how `g_autofree` works, so
disable those tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
The macros for the probes confuse the static analyser, and are often
called with arguments which the analyser things shouldn’t be used any
more (for example, the address of a block of memory which has just been
freed).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
The previous documentation said this:
g_type_add_interface_static:
"Adds the static interface_type to instantiable_type"
g_type_add_interface_dynamic:
"Adds the dynamic interface_type to instantiable_type"
The above suggests that if one is adding a static interface to a dynamic
object, one should use g_type_add_interface_static because the interface
is static, but the code and usage (with the newly added
G_IMPLEMENTS_INTERFACE_DYNAMIC) imply that this is wrong, and that
what matters is whether the *instanciable_type* is dynamic or not.
Hence this patch moves the "static" and "dynamic" words close to
"instantiable_type".
Closes issue #259
This uses a 32bit hole in the GObject structure on 64bit arches
as a flag field which can be optionally used for some preformance hints.
Currently there is a flag that gets set any time you connect to a signal
on a GObject which is used as early bailout for signal emissions, and using
the flags field instead of a user-data for checking if a GObject is
under construction.
The Python runtime is not amenable to Valgrind, and leak checking is a
lot less relevant in Python compared to C.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #487
These macros wrap functions which were only introduced in certain
versions of GLib. The functions are correctly marked as introduced in
those versions, but the macros aren’t, which can result in not getting
appropriate deprecation warnings if you’re using those APIs when you
have said you’re targeting older GLib versions using
`GLIB_VERSION_MAX_ALLOWED`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1860
"Uninitialized value" is partially correct, since it has not been
initialized with a type, but it's more precise to say
"zero-initialized value". It is still a programming error to pass a
pointer to uninitialized memory with arbitrary contents as the value.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We're using the `install` argument for configure_file() all over the
place.
The support for an `install` argument for configure_file() was added in
Meson 0.50, but we haven't bumped the minimum version of Meson we
require, yet; which means we're getting compatibility warnings when
using recent versions of Meson, and undefined behaviour when using older
versions.
The configure_file() object defaults to `install: false`, unless an
install directory is used. This means that all instances of an `install`
argument with an explicit `true` or `false` value can be removed,
whereas all instances of `install` with a value determined from a
configuration option must be turned into an explicit conditional.
Connect the dots between G_ADD_PRIVATE and the various G_DEFINE_* macros
that use it, as well as expanding the code example for
G_DEFINE_TYPE_EXTENDED with a private instance data declaration.
Closes: #943
The two test scripts actually assumed some *NIX paradigms, so we need
to adapt them so that they can work on Windows as well, the changes are
namely:
-Call the glib-mkenums and glib-genmarshal Python scripts with the
Python interpreter, not just relying on shebang lines, on Windows.
This is because the native Windows console (cmd.exe) does not support
shebang lines, for subprocess.run().
-Use NamedTemporaryFile with delete=False, otherwise Windows cannot find
the temp files we need when running the tests.
-Use universal_newlines=True for subprocess.run() so that we do not need
to worry out line ending differences on different systems.
-Make sure we are not in the temp directories we create, where the tests
are being run, upon cleanup. Windows does not like deleting
directories that we are currently in.
On Windows and possibly other platforms the '%p' printf modifier does
not prefix printed values with '0x', so do not expect the warning
message to contain the '0x' prefix for the handler pointer value.
When building a valist marshaller, we can avoid reffing a GParamSpec
if the argument is known to always be static. The marshaller we ship in
`gmarshal.c` got this right, but marshallers generated by
glib-genmarshal were missing the optimisation. Fix that, and add a unit
test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1792
Using the generic marshaller has drawbacks beyond performance. One such
drawback is that it breaks the stack unwinding from the Linux kernel due
to having unsufficient data to walk past ffi_call_unixt64. That means that
performance profiling by application developers looks grouped among
seemingly unrelated code paths.
Related to GNOME/Initiatives#10
If we specify a c_marshaller, g_signal_newv() will never assign an
va_marshaller automatically. So either use NULL (for simple cases), or
specify both to avoid the generic performance penalty.
When building a valist marshaller, we can avoid a string copy if the
argument is known to always be static. The marshaller we ship in
`gmarshal.c` got this right, but marshallers generated by
glib-genmarshal were missing the optimisation. Fix that, and add a unit
test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1792
The old (Perl) implementation of glib-genmarshal used
g_variant_ref_sink() to correctly handle floating inputs; the Python
version should do the same.
Includes a unit test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1793
This is a basic test suite for the `glib-genmarshal` utility, lifted
mostly directly from the tests for `glib-mkenums`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This makes the Meson build code for it a little more generic, and adds
support for installed tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While this was useful for local testing while developing the test, it’s
not widely applicable. Look the binary up in the current `${PATH}` if
it’s not specified using `G_TEST_BUILDDIR`.
This is needed to get the `mkenums.py` test working as an
installed-test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
We already have the GType with which the GValue should be initialized,
so requiring an initialized GValue is not really necessary, and it
actually complicates code that wraps GObject, by requiring the retrieval
of the GParamSpec in order to get the property type. Additionally, it
introduces a mostly unnecessary g_value_reset().
We already changed g_object_getv() to allow passing uninitialized
GValues, but this fell through the cracks.
Closes: #737
These have all been documented as deprecated for a long time, but we’ve
never had a way to programmatically mark them as deprecated. Do that
now.
This is based on the list of deprecations from the reverted commit
80fcb1bc2.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #638
Use the new `GLIB_DEPRECATED_{TYPE,ENUMERATOR}*` macros to annotate types
and enumerators as deprecated, rather than using `G_DISABLE_DEPRECATED`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It allows to disconnect a signal handler from GObject instance and at the same
time to nullify the signal handler.
Provided also a macro for handler type conversion.
Since out-of-source-tree builds are now used after switching to meson,
we don't need .gitignore files in the source directories to ignore
build artifacts.
This fixes build errors when doing a meson build after an autotools
build, because generated files such as gio/xdp-dbus.c won't show up in
a `git status`, or be removed by a `git clean -f`, and so it won't be
obvious that such files need to be removed for the meson build to
succeed.
Currently, there is no way to prevent tests from building using meson.
When cross-compiling, building the tests isn't necessary.
Instead, only build the tests on the following conditions:
1) If not cross-compiling.
2) If cross-compiling, and there is an exe wrapper.
This reverts commit 80fcb1bc26.
G_DISABLE_DEPRECATED should never be used by anybody, least of all by
GLib. We have deprecation annotations for the compiler, these days, and
they are much better suited than a macro that makes symbols appear and
disappear. The fact that gtk-doc doesn't understand the deprecation
annotations is a limitation of gtk-doc, and it's gtk-doc that ought to be
fixed.
Commit 80fcb1bc broke GStreamer, which disables old API that was
deprecated before the introduction of the deprecation annotations, but
still uses newly deprecated one, and relies on the deprecation
annotations to do their thing. It also broke libsoup, as it uses
GValueArray in its own API.
This is not new; all of its methods have been deprecated for a long
time. Make the deprecation more obvious, however, by marking the whole
section as deprecated.
Note that GArray can’t *quite* do everything that GValueArray could.
See #1069 for work to fix this. This documentation block can be updated
again once that’s fixed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As pointed out by gtk-doc, these are all symbols which have been marked
as deprecated, but which aren’t protected by a deprecation guard. We
can’t use G_DEPRECATED_IN_* for them, as they are all non-function
symbols. Instead, wrap them in #ifndef G_DISABLE_DEPRECATED.
In some cases, we also need to wrap one or two functions which use the
deprecated types in G_DISABLE_DEPRECATED too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
g_object_set_data() should only ever be used with a small, bounded set
of keys, or the memory usage of the quark lookup table will grow
unbounded. Document that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #682
Grouping things together makes them easier to find and keep up to date.
This doesn’t modify any of the comments or make any functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
They were originally generated by glib-genmarshal, which documents its
output as being under the same license as the containing project. In
this case, that’s LGPL.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The threads used to iterate at least 10000 times before setting the
"seen thread" flag to true. After porting they inadvertently did that
in the first iteration.
Previously, the test assumed that thread1 and thread2 would be scheduled
enough to set seen_thread{1,2} by the fact that the test runs for a high
number of iterations. On some platforms/schedulers, that’s not true,
which causes the test to spuriously fail.
Fix that by forcing the test to continue iterating until both threads
are seen. If this takes too long, the Meson test runner timeout will be
hit and the test will be terminated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, all three threads would access several global variables
without locking.
Fix that by using atomic accesses to data stored within the
test_closure_refcount() function, which also eliminates the global state
(which would confuse further tests if they were added to this file).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out if G_DISABLE_ASSERT is defined; and
g_assert_*() provide more specific error messages on failure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These functions are not run more than once, so the variables don’t need
to be static to save state between runs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
GValue g_type field is used for synchronization with g_once_init_enter,
and so it should be written to only with g_once_init_leave.
Replace structure copy with memcpy that copies the one remaining field
of GValue, i.e., data array.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
I'm trying to use `-fsanitize=thread` for OSTree, and some of
these issues seem to go into GLib. Also, the sanitizers work better if
the userspace libraries are built with them too.
This fix is similar to
b6814bb37c
Mixing atomic and non-atomic reads trips TSAN, so let's change the
assertions to operate on the local values returned from atomic
read/writes.
Without this change I couldn't even *build* GLib with TSAN, since we
use gresources during compilation, which uses GSubprocess, which hits
this code.
(Minor review fixes made by Philip Withnall <withnall@endlessm.com>.)
https://gitlab.gnome.org/GNOME/glib/issues/1224
This is an analogous commit to c1f5e528. The original fix only touched
gtype.h and not gtypemodule.h.
The *_init() functions have prototypes incompatible with *InitFunc types they
are being cast to. This upsets GCC 8's -Wcast-function-type that's enabled by
default with -Wextra.
Let's not have the public header files emit a warning and neutralize it by
doing a void(*)(void) cast first.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1666
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
And mention why it’s not a GInterfaceInitFunc as people who have read
the GObject docs cover-to-cover might expect.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Note that it's not reported with gcc. It's only reported with g++.
C++ code to reproduce this warning:
#include <glib-object.h>
G_BEGIN_DECLS
#define GARROW_TYPE_FILE (garrow_file_get_type())
G_DECLARE_INTERFACE(GArrowFile,
garrow_file,
GARROW,
FILE,
GObject)
struct _GArrowFileInterface {
GTypeInterface g_iface;
};
G_DEFINE_INTERFACE(GArrowFile,
garrow_file,
G_TYPE_OBJECT)
static void
garrow_file_default_init(GArrowFileInterface *iface)
{
}
G_END_DECLS
Build command line:
% g++ -Wall -shared -o liba.so a.cpp $(pkg-config --cflags --libs gobject-2.0)
Message:
In file included from /tmp/local.glib/include/glib-2.0/gobject/gobject.h:24,
from /tmp/local.glib/include/glib-2.0/gobject/gbinding.h:29,
from /tmp/local.glib/include/glib-2.0/glib-object.h:23,
from a.cpp:1:
a.cpp: In function 'GType garrow_file_get_type()':
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:219:50: warning: '<<' in boolean context, did you mean '<' ? [-Wint-in-bool-context]
#define G_TYPE_MAKE_FUNDAMENTAL(x) ((GType) ((x) << G_TYPE_FUNDAMENTAL_SHIFT))
~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:2026:11: note: in definition of macro '_G_DEFINE_INTERFACE_EXTENDED_BEGIN'
if (TYPE_PREREQ) \
^~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:1758:47: note: in expansion of macro 'G_DEFINE_INTERFACE_WITH_CODE'
#define G_DEFINE_INTERFACE(TN, t_n, T_P) G_DEFINE_INTERFACE_WITH_CODE(TN, t_n, T_P, ;)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
a.cpp:16:1: note: in expansion of macro 'G_DEFINE_INTERFACE'
G_DEFINE_INTERFACE(GArrowFile,
^~~~~~~~~~~~~~~~~~
/tmp/local.glib/include/glib-2.0/gobject/gtype.h:178:25: note: in expansion of macro 'G_TYPE_MAKE_FUNDAMENTAL'
#define G_TYPE_OBJECT G_TYPE_MAKE_FUNDAMENTAL (20)
^~~~~~~~~~~~~~~~~~~~~~~
a.cpp:18:20: note: in expansion of macro 'G_TYPE_OBJECT'
G_TYPE_OBJECT)
^~~~~~~~~~~~~
Conceptually the binding is kept alive as long as both the source and
target exist. This means that an API user needs to take some care to
either hold a reference or only use a pointer to the binding as long as
also holding references to both objects.
Clarify the documentation a bit.
Turns out the fix in commit 93555577c wasn't enough, when using glib as
subproject and the parent project uses only libgio_dep, and include
<gi18n.h>, it won't find libintl.h because it's in the
include_directories of libglib_dep. Fix that by declaring dependencies
explicitly, which is the right thing to do since glib and gobject are
public dependencies of gio. That reflects what we do for the pkg-config
file as well.
When passing a function to G_IMPLEMENT_INTERFACE, it actually has to
take two arguments. Who knew?
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When using glib as subproject we are forced to pass glib_dep,
gobject_dep and gio_dep to any build target. If we pass only gio_dep it
will missing include directory for glib and gobject.
Add tests using an object declared with G_DECLARE_FINAL_TYPE, that is derived
from another, declared using G_DECLARE_DERIVABLE_TYPE, and that
thus uses _GLIB_DEFINE_AUTOPTR_CHAINUP to define cleanup functions.
And verify that both g_autoptr(Type) and g_auto(s)list(Type) work
Fedora is using https://fedoraproject.org/wiki/Changes/Annobin
to try to ensure that all objects are built with hardening flags.
Pass down `CFLAGS` to ensure the SystemTap objects use them.
An assertion is harder to skip over, and using a g_critical() can give
us a more informative error message.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/179
This makes it easier to debug test failures, by ensuring that g_debug()
and g_test_message() are printed as TAP diagnostics.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/1528
Signed-off-by: Simon McVittie <smcv@collabora.com>
g_object_bind_property() (transfer none) returns a GBinding with an existing internal
reference which is active as long as the "binding" is. This allows to optionally use
the binding without any memory management, as it will remove itself when it is no longer
needed.
There are currently three ways to remove the "binding" and as a result the reference:
1) Either the source or target dies and we get notified by a weakref callback
2) The user unrefs the binding until it is destroyed (which is semi-legal,
but worked and is used in the test suite)
3) The user calls g_binding_unbind()
In case (3) the problem was that it always calls unref even if the "binding" is already
gone, leading to crashes when called from bindings multiple times.
In #1373 and !197 it was noticed that a function always unrefs which would be a
"transfer full" annotation, but the problem here is that it should only remove the
ref when removing the "binding" and the annotation should stay "transfer none".
As a side effect of this fix it is now also possible to call g_binding_unbind() multiple
times where every call after the first is a no-op.
This also adds explicit tests for case (1) and (3) - only case (3) is affected by this change.
Part of runMkenumsWithHeader() was duplicated in test_reproducible(),
and would otherwise need to be duplicated again in upcoming tests. Many
places duplicated decoding stdout/stderr and checking the exit code.
Introduce a named tuple for the returned fields; and factor out writing
a template file to pass with --template.
The new python module, added with 0.46, works with Python 2 and 3 and
allows to pass a path for the interpreter to use, if the need arises.
Previously the meson build set PYTHON, used in the shebang line of
the scripts installed by glib, to the full path of the interpreter.
The new meson module doesn't expose that atm, but we should set it to
a executable name anyway, and not a full path.
Several of our tools are installed and are used by other projects to
generate code. However, there is no 'install' when projects use glib
as a subproject.
We need some way for glib to 'provide' these tools so that when some
project uses glib as a subproject, find_program('glib-mkenums') will
transparently return the glib-mkenums we just built.
Starting from Meson 0.46, this can be done with the
`meson.override_find_program()` function.
As a bonus, the Meson GNOME module will also use these
'overriden'/'provided' programs instead of looking for them in PATH.
PEP8 says that:
"Comparisons to singletons like None should always be done with is or
is not, never the equality operators."
glib uses a mix of "== None" and "is None". This patch changes all
cases to the latter.
The implementation is silently discarding this anyway, and
g_object_unref() is using atomic operations. So this should be safe.
Having this here triggers -Wdiscarded-qualifiers when g_clear_pointer()
is fixed to use __typeof__().
The implementation is silently discarding this anyway, and
g_object_unref() is using atomic operations. So this should be safe.
Having this here triggers -Wdiscarded-qualifiers when g_clear_pointer()
is fixed to use __typeof__().
Switch the check which tests whether the object has been finalised from
being a use-after-free, to using a weak pointer which is nullified on
finalisation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
If some other per value option was present than 'skip' or 'nick' then
a KeyError would occur. Ignoring such options matches the behaviour of
the old, Perl-based glib-mkenums.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
https://gitlab.gnome.org/GNOME/glib/issues/1360
This makes them a bit more unique (and, crucially, in the g_* namespace)
to avoid shadowing collisions with calling code.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/258
It's been 4 years and 8 development cycles since we introduced
G_ADD_PRIVATE and offset-based private data access. It is now
time to finally deprecate the old mechanism.
Closes: #699
Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
In master, it is already possible to build GLib using Visual Studio
using Meson[1] for some time, so we should focus on maintaining only the
Meson build files for building GLib with Visual Studio.
[1]: There are caveats when building with Visual Studio 2008, namely
that one needs to use the mt command to embed the manifests that
are generated with the .exe/DLLs, for all builds, and that in the
case where the compilation hangs on Visual Studio 2008 x64, as a
workaround, should stop the build by terminating all cl.exe tasks
and change the compiler optimization flag from /O2 (full speed) to
/O1 (optimize for size), due to compiler optimization issues.
It's mostly not used anymore and doesn't do what it says it does.
The docs state that it affects GList, GSList, GNode, GMemChunks, GSignal,
GType n_preallocs and GBSearchArray while:
* GList, GSList and GNode use GSlice and are not affected
* GMemChunks is gone
* GType npreallocs is ignored
It also states that it can be used to force the usage of g_malloc/g_free,
which is handled by G_SLICE=always-malloc now.
The only places where it's used is in signal handling through GBSearchArray
and in GValueArray (deprecated). Since it's unlikely that anyone wants to
reduce allocation sizes just for those cases remove the build option.
valgrind.h is a verbatim copy taken from Valgrind project. Previously
that file had local changes that got dropped by last update. To avoid
regressing again, do not edit valgrind.h anymore and instead add a
gvalgrind.h wrapper that gets included instead.
This fix 2 errors:
- uintptr_t is not defined when including valgrind.h on mingw.
- MSVC compiler is not supported on amd64-Win64 platform.
The timer tests expect that a small value for sleep does not result in
no sleep at all. Round up to the next millisecond to bring it more in line
with other platforms.
This fixes the glib/timer tests.
This makes the 'threadtests' time out since that uses small usleeps a lot and
until now didn't wait at all, but now always waits a msec. Reduce the amount
of tests done on Windows to get the runtime down to something reasonable again.
https://bugzilla.gnome.org/show_bug.cgi?id=795569
On non-glibc platforms gettext is provided by extra libintl dependency.
We wrongly thought libintl is an internal dependency and applications
needs to explicitly link on it, but turns out that breaks many
applications and with autotools the .pc generated actually has -lintl in
public "Libs:".
https://bugzilla.gnome.org/show_bug.cgi?id=796085
Do not add support for its subtypes, since all their constructors return
GParamSpec*, and g_param_spec_unref() takes a GParamSpec* rather than a
gpointer — adding G_DEFINE_AUTOPTR_CLEANUP_FUNC() for subtypes of
GParamSpec results in compiler warnings about mismatched parameter
types (GParamSpecBoolean* vs GParamSpec*, for example).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=796139
-z nodelete breaks the libresourceplugin module usage in the resources.c
test, which expects to be able to unload it.
Make the Meson build match what the autotools build does: only pass
glib_link_flags to the headline libraries (glib-2.0, gio-2.0,
gobject-2.0, gthread-2.0, gmodule-2.0) and omit it from all other build
targets.
https://bugzilla.gnome.org/show_bug.cgi?id=788771
The -fstack-protector-strong used in many distributions by default has a
rather drastic slowdown of the fast path in generated _get_type()
functions using G_DEFINE_* macros. The amount can vary by architecture,
GCC version, and compiler flags.
To work around this, and ensure a higher probability that our fast-path
will match what we had previously, we need to break out the slow-path
(registering the type) into a secondary function that is not a candidate
for inlining.
This ensures that the common case (type registered, return the GType id)
is the hot path and handled in the prologue of the generated assembly even
when -fstack-protector-strong is enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=795180
The existing implementation was completely incorrect (despite the fix in
commit 566e64a66) — it always compared GVariants by pointer, rather than
by value.
Reimplement it to compare them by value where possible, depending on
their type. The core of this implementation is g_variant_compare(). See
the documentation and tests for further details of the new sort order.
This adds documentation and tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795735
This was causing g_param_value_defaults to return 1
for GVariant values even when the value is clearly
different from the default.
This was showing up as gtk-builder-tool stripping
non-default values for GtkActionable::action-target
from ui files.
It was previously a copy–paste of G_VALUE_COLLECT, which is wrong,
because it’s the inverse function of G_VALUE_COLLECT. Document that, so
the whole thing is a little less confusing (but by no means perfect).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The critical omission from the GClosure documentation is that you need
to call g_closure_set_marshal() when implementing a custom GClosure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
glib-genmarshal shows redundant "time" warning message against combination with --header and --body option.
Before:
WARNING: Using --header and --body at the same time time is deprecated; use --body --prototypes instead
After:
WARNING: Using --header and --body at the same time is deprecated; use --body --prototypes instead
https://bugzilla.gnome.org/show_bug.cgi?id=795429
Signed-off-by: Kentaro Hayashi <hayashi@clear-code.com>
On gcc 4.7, we got the following error:
i686-nptl-linux-gnu-gcc --version
> i686-nptl-linux-gnu-gcc (crosstool-NG 1.20.0) 4.7.4
> $ echo '#include <glib-object.h>' | i686-nptl-linux-gnu-gcc -x c -I
staging/usr/include/glib-2.0 -I staging/usr/lib/glib-2.0/include -Wall
-Werror -c - -o /tmp/foo.o
> In file included from
staging/usr/include/glib-2.0/gobject/gbinding.h:29:0,
> from staging/usr/include/glib-2.0/glib-object.h:23,
> from <stdin>:1:
> staging/usr/include/glib-2.0/gobject/gobject.h: In function
'g_set_object':
> staging/usr/include/glib-2.0/gobject/gobject.h:725:5: error: value
computed is not used [-Werror=unused-value]
> cc1: all warnings being treated as errors
This error has been added by commit 3fae39a5d7
So enable the new g_set_object definition only if gcc >= 4.8
Fixes:
- http://autobuild.buildroot.net/results/b29a2f868438a2210873ea72f491db63175848be
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795138
There is no transfer annotation that can express transfer semantics of
g_object_new_with_properties in general. When GInitiallyUnowned object
is constructed the introspection data will be incorrect.
Mark it with skip annotation.
https://bugzilla.gnome.org/show_bug.cgi?id=795025
Previously we were only detecting typedef\*senum\s*\{, which does not
handle the case where there is an entifier for the enum itself but
not the typedef. glib-mkenums would then attempt to read the next line
looking for a matching {, but in vain.
https://bugzilla.gnome.org/show_bug.cgi?id=794506
It’s defined in gutils.h, but various users of GLib might not have
access to that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
https://bugzilla.gnome.org/show_bug.cgi?id=793272
The *_init() functions have prototypes incompatible with *InitFunc types they
are being cast to. This upsets GCC 8's -Wcast-function-type that's enabled by
default with -Wextra.
Let's not have the public header files emit a warning and neutralize it by
doing a void(*)(void) cast first.
https://bugzilla.gnome.org/show_bug.cgi?id=793272
It's not possible to subclass GValue, and by always explicitly casting
here it is easy to write broken code (e.g. passing a GValue**) without
the compiler warning about that.
By not casting, the compiler will error out if anything but a GValue* is
passed here.
https://bugzilla.gnome.org/show_bug.cgi?id=793186
gtk-doc doesn’t support them any more since it was ported to Markdown,
so they end up appearing in the generated documentation, which isn’t
great.
Mostly, they were used to split up things invisibly, which we can do in
other ways.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Properly define GLIB/GOBJECT_STATIC_COMPILATION when static build is enabled.
Use library() instead of shared_library() to allow selecting static builds.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
This makes easier to write a module that can be both dynamic and static.
It will allow to statically build modules from glib-networking, for
example.
A module can rename its g_io_module_load() function to
g_io_<modulename>_load(), and then an application which links statically
against that module can call g_io_<modulename>_load(NULL) to register
types and extension points from the module. If a module is loaded
dynamically, its load() function will continue to be called with a
non-NULL GIOModule instance.
https://bugzilla.gnome.org/show_bug.cgi?id=684282
This is for destroying resources needed by transformations. But the user
may not need any such resources. Make it obvious that, instead of having
to point to a no-op function, @notify is checked and not called if NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=792098
Weak-pointers are currently lacking g_set_object() & g_clear_object()
helpers equivalent. New functions (and macros, both are provided) are
convenient in many case, especially for the property's notify-on-set
pattern:
if (g_set_weak_pointer (...))
g_object_notify (...)
Inspired by Christian Hergert's original implementation for
gnome-builder.
https://bugzilla.gnome.org/show_bug.cgi?id=749527
Conceptually, these functions clearly ought to be fine for a const
structure. This avoids _G_TYPE_CVH (the implementation of
G_TYPE_CHECK_VALUE_TYPE, G_VALUE_HOLDS, G_VALUE_HOLDS_BOXED etc.)
needing to cast to a mutable GValue, which causes
G_VALUE_HOLDS (cv, type) to issue warnings under gcc -Wcast-qual if
cv is a const GValue *.
https://bugzilla.gnome.org/show_bug.cgi?id=734479
Some source files aren't valid utf-8 containing for example
iso8859-1 accented characters in author's names.
Replace invalid data with a replacement '?' character and print a
warning to keep things working.
Based on a patch from Christoph Reiter in
https://bugzilla.gnome.org/show_bug.cgi?id=785113#c20
The type propagation breaks the GRefPtr.h class in WebKitGTK, and in
any case existing C++ code calling the C API will need to perform an
explicit cast, as there's no automatic promotion of pointer types to
and from void*.
Tested-by: GNOME Continuous
https://bugzilla.gnome.org/show_bug.cgi?id=790697
When compiling code that includes gobject.h using GCC with the ISO
standard, the `typeof` keyword is disabled, as it's a GCC extension.
The GCC documentation recommends:
> If you are writing a header file that must work when included in
> ISO C programs, write __typeof__ instead of typeof.
Which is precisely what we're going to do.
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790697
Currently, g_object_ref() and g_object_ref_sink() return a
gpointer which can mask issues when assigning to fields or
returning from a function.
To help catch these type of programming errors, we can propagate
the type of the parameter through the function call on GCC
using the typeof() C language extension.
This will cause offending code to have a warning, but will
continue to be source and binary compatible.
This is only enabled when GLIB_VERSION_MAX_ALLOWED is 2.56 or greater.
https://bugzilla.gnome.org/show_bug.cgi?id=790697
Putting a <!-- --> in plural<!-- -->s was an old hack used to fix
linking the symbol with gtk-doc when gtk-doc didn’t know about plural
forms. gtk-doc does now know about plural forms, so the hack can be
removed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
It's theoretically possible that we could have a case where this would
actually return NULL, but it's difficult to imagine a valid program that
would contain such a case.
Add an explicit assert here to quiet up static analysis.
See the bug for more discussion.
Coverity CID: 1159477
https://bugzilla.gnome.org/show_bug.cgi?id=730296
Where we were already treating GHashTables as sets, modify them to use
the set-specific APIs g_hash_table_add() and g_hash_table_contains(), to
make that usage more obvious and less prone to being broken.
Heavily based on patches by Garrett Regier <garrettregier@gmail.com>.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749371
Clarify the licensing of the code generated by the two scripts in a
comment in the header of each generated file. The intention is that the
license of GLib does *not* apply to the generated files; but that they
are subject to the linking restrictions of the LGPL, since they link to
GLib and GLib is licensed under the LGPL. The generated files themselves
are under the license of whatever project they’re generated for.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788990
We should ensure a stable order when processing the files, regardless of
the order they were submitted on the command line, to increase the
chances of a reproducible build.
The old Perl-based version of glib-mkenums was fixed in commit 8686e430
to do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=691436
The fallback code for providing a default comment template only worked
if a template file was provided. It didn’t work if individual templates
were provided on the command line (and --comment wasn’t).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788990
They return floating references. The convention established by GVariant
is to annotate these as (transfer none) so that the caller does a
ref+sink on them, rather than just a ref.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=677233
The m4 and bash completion items are usable and relevant
depending on the host system's configuration. So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.
For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.
Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.
This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
This was duplicated also in g_object_interface_install_property().
Now, validations specific to classes happen in
validate_and_install_class_property() - specifically, the checks for
the presence of the get_property() and set_property() methods.
https://bugzilla.gnome.org/show_bug.cgi?id=787551
