`g_settings_reset()` changes the value of the setting to `NULL`;
`add_to_tree()` was not handling that correctly.
Add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
Emit this when we're about to spawn or DBus activate a GAppInfo. This
allows lauchers to keep the appinfo associated with a startup id.
We use a GVariant to allow for future exansion of the supplied data.
This is a partial revert of commit
f378352051, as the previous commits have
silenced the AddressSanitizer warnings for `GContentType`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2310
If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
The modification time test creates a file, gets the modification time in
seconds, then gets the modification time in microseconds and assumes
that the difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
These were missing from the test before the previous commit ported from
`GMainLoop` to `GMainContext`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It makes combination exit conditions a lot easier than when using
`g_main_loop_quit()` from different callbacks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
WebKit wants these private key properties to be readable in order to
implement a deserialization function. Currently they are read-only
because at the time GTlsCertificate was originally designed, the plan
was to support PKCS#11-backed private keys: private keys that are stored
on a smartcard, where the private key is completely unreadable. The
design goal was to support both memory-backed and smartcard-backed
private keys with the same GTlsCertificate API, abstracting away the
implementation differences such that code using GTlsCertificate doesn't
need to know the difference.
The original PKCS#11 implementation was never fully baked and at some
point in the past I deleted it all. It has since been replaced with a
new implementation, including a GTlsCertificate:private-key-pkcs11-uri
property, which is readable. So our current API already exposes the
differences between normal private keys and PKCS#11-backed private keys.
The point of making the private-key and private-key-pem properties
write-only was to avoid exposing this difference.
Do we have to make this API function readable? No, because WebKit could
be just as well served if we were to expose serialize and deserialize
functions instead. But WebKit needs to support serializing and
deserializing the non-private portion of GTlsCertificate with older
versions of GLib anyway, so we can do whatever is nicest for GLib. And I
think making this property readable is nicest, since the original design
reason for it to not be readable is now obsolete. The disadvantage to
this approach is that it's now possible for an application to read the
private-key or private-key-pem property, receive NULL, and think "this
certificate must not have a private key," which would be incorrect if
the private-key-pkcs11-uri property is set. That seems like a minor
risk, but it should be documented.
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
Confusingly, g_spawn_check_exit_status() takes a wait status, not an
exit status, so passing g_subprocess_get_exit_status() to it is
incorrect (although both encodings happen to use 0 to encode success
and a nonzero value to encode failure, so in practice this probably
had the desired effect).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Following on from the previous commit, some explicit
`g_main_context_wakeup()` calls were missing from the test code which
only uses `GMainContext`.
Add them, and also add some assertions to check that these functions are
being called in the expected thread (as the code comments say).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a bit of a compromise. Since the option parsing in
`GApplication` is built on `GOptionContext`, there’s no way to
reliably indicate that a given option was passed by the user, other than
by its value changing. If the default value is zero, but the user
explicitly passed zero, nothing changes, so it’s not obvious that the
option was explicitly provided.
When just `GOptionContext` is being used, this is fine, as that’s
obvious what will happen from the way the API is built. With
`GApplication::handle-local-options`, though, the `GVariantDict`
provided by GLib to the callback claims to only contain the values of
the options provided by the user, and no defaults.
It’s not actually possible for GLib to do that reliably.
Previously, GLib was dropping all numeric values which were zero valued
(i.e. the defaults), as they *could* have been the defaults. It seems
like a slightly better behaviour to instead *not* drop those numeric
values, and err on the side of reporting some defaults as user-provided
(even if they weren’t) rather than dropping some user-provided values
which happen to be the defaults.
This adds a test for the case of parsing a double; the cases for
integers are analogous.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2329
The tests in `gdbus-names.c` use a mixture of `GMainLoop` and iterating
a `GMainContext` directly. Some of the helper functions based around the
`OwnNameData` struct use the `loop` `GMainLoop` even when called from
tests like `watch_with_different_context()` which themselves use
`GMainContext` directly.
Thus, it’s possible for the `GMainLoop` to not be running, while the
test is iterating on `g_main_context_iteration()`. In this case,
`g_main_loop_quit()` is a no-op and will not wake up the `GMainContext`.
This causes the test to livelock in around 1 in 1200 test runs.
Fix this by adding an explicit `g_main_context_wakeup()` call after each
`g_main_loop_quit()` call. A more comprehensive fix would be to port all
the tests in this file to iterating `GMainContext` directly, and drop
all the `GMainLoop` usage, but I don’t have time for that right now.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Relax the requirement for the test to only be compiled/run under gcc,
since a version of LLVM was released which supports `--add-symbol`.
`objcopy` should be overrideable to be `llvm-objcopy` by using a machine
file as per https://mesonbuild.com/Machine-files.html#binaries.
Suggested and tested by Grigory Vasilyev.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2423
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/unix-streams.c: In function ‘test_write_async_wouldblock’:
gio/tests/unix-streams.c:692:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
692 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
gio/tests/unix-streams.c: In function ‘test_writev_async_wouldblock’:
gio/tests/unix-streams.c:780:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
780 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
An application that has been shut down is still marked as registered
even if its implementation has been already destroyed.
This may lead to unguarded crashes when calling functions that have
assumptions for being used with registered applications.
So, when an application is registered, mark it as unregistered just
before destroying its implementation and after being shut down, so that
we follow the registration process in reversed order.
Added tests
gio/tests/socket-common.c: In function ‘socket_address_from_string’:
gio/tests/socket-common.c:50:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
50 | for (i = 0; i < G_N_ELEMENTS (unix_socket_address_types); i++)
| ^
gio/tests/gnotification-server.c: In function ‘g_notification_server_bus_acquired’:
gio/tests/gnotification-server.c:224:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
224 | };
| ^
gio/tests/gdbus-proxy.c: In function ‘strv_equal’:
gio/tests/gdbus-proxy.c:158:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
158 | res = g_strv_length (strv) == count;
| ^~
gio/tests/gsettings.c: In function ‘strv_set_equal’:
gio/tests/gsettings.c:2268:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
2268 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/gdbus-testserver.c:806:1: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
806 | };
| ^
In file included from gio/gio.h:53,
from gio/tests/gdbus-testserver.c:1:
gdbusconnection.h:395:12: note: ‘padding’ declared here
395 | gpointer padding[8];
| ^~~~~~~
gio/tests/gdbus-testserver.c: In function ‘handle_method_call’:
gio/tests/gdbus-testserver.c:334:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
334 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:343:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
343 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:352:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
352 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:361:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
361 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:370:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
370 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:379:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
379 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:388:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
388 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:397:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
397 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:406:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
406 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/mimeapps.c: In function ‘strv_equal’:
gio/tests/mimeapps.c:31:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
31 | res = g_strv_length (strv) == count;
| ^~
gio/tests/proxy-test.c: In function ‘do_echo_test’:
gio/tests/proxy-test.c:855:25: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘gsize’ {aka ‘long unsigned int’}
855 | for (total = 0; total < nwrote; total += nread)
| ^
gio/tests/file.c: In function ‘written_cb’:
gio/tests/file.c:358:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘size_t’ {aka ‘long unsigned int’}
358 | if (data->pos < strlen (data->data))
| ^
gio/tests/gdbus-test-codegen.c: In function ‘check_object_manager’:
gio/tests/gdbus-test-codegen.c:2344:20: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
2344 | if (om_signal_id != -1)
| ^~
gio/tests/testfilemonitor.c: In function ‘check_expected_events’:
gio/tests/testfilemonitor.c:124:39: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
124 | for (i = 0, li = 0, l = recorded; i < n_expected && l != NULL;)
| ^
gio/tests/socket.c: In function ‘test_get_available’:
gio/tests/socket.c:1696:53: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘long unsigned int’
1696 | if (g_socket_get_available_bytes (server) > sizeof (data))
| ^
gio/tests/gdbus-export.c:130:1: error: missing initializer for field ‘properties’ of ‘GDBusInterfaceInfo’ {aka ‘const struct _GDBusInterfaceInfo’}
130 | };
| ^
In file included from gio/gio.h:57,
from gio/tests/gdbus-export.c:21:
gio/gdbusintrospection.h:156:25: note: ‘properties’ declared here
156 | GDBusPropertyInfo **properties;
| ^~~~~~~~~~
...
gio/tests/actions.c: In function ‘strv_set_equal’:
gio/tests/actions.c:177:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
177 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/actions.c: In function ‘test_parse_detailed’:
gio/tests/actions.c:473:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
473 | for (i = 0; i < G_N_ELEMENTS (testcases); i++)
| ^
gio/tests/actions.c: In function ‘test_entries’:
gio/tests/actions.c:375:5: error: missing initializer for field ‘parameter_type’ of ‘GActionEntry’ {aka ‘const struct _GActionEntry’}
375 | { "foo", activate_foo },
| ^
In file included from gio/gio.h:31,
from gio/tests/actions.c:1:
gio/gactionmap.h:63:16: note: ‘parameter_type’ declared here
63 | const gchar *parameter_type;
| ^~~~~~~~~~~~~~
...
gio/tests/gdbus-peer-object-manager.c: In function ‘mock_interface_get_vtable’:
gio/tests/gdbus-peer-object-manager.c:111:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘struct _GDBusInterfaceVTable’}
111 | };
| ^
gio/tests/network-address.c: In function ‘main’:
gio/tests/network-address.c:1194:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1194 | for (i = 0; i < G_N_ELEMENTS (host_tests); i++)
| ^
gio/tests/network-address.c:1201:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1201 | for (i = 0; i < G_N_ELEMENTS (uri_tests); i++)
| ^
gio/tests/network-address.c:1208:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1208 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/network-address.c:1215:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1215 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/gsubprocess.c: In function ‘test_communicate_async’:
gio/tests/gsubprocess.c:774:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
774 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async’:
gio/tests/gsubprocess.c:1025:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1025 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_cancelled_async’:
gio/tests/gsubprocess.c:1058:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1058 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async_invalid’:
gio/tests/gsubprocess.c:1202:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1202 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/converter-stream.c: In function ‘g_expander_converter_convert’:
gio/tests/converter-stream.c:128:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
128 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c: In function ‘g_compressor_converter_convert’:
gio/tests/converter-stream.c:234:23: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
234 | if (in_end - in < block_size)
| ^
gio/tests/converter-stream.c:244:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
244 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c:257:33: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
257 | if (v == 0 && in_end - in == block_size && (flags & G_CONVERTER_INPUT_AT_END) == 0)
| ^~
gio/tests/converter-stream.c: In function ‘test_expander’:
gio/tests/converter-stream.c:356:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
356 | for (i = 0; i < sizeof(unexpanded_data); i++)
| ^
gio/tests/converter-stream.c: In function ‘test_compressor’:
gio/tests/converter-stream.c:445:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
445 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:454:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
454 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘test_converter_pollable’:
gio/tests/converter-stream.c:1077:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1077 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:1086:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1086 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘main’:
gio/tests/converter-stream.c:1220:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1220 | for (i = 0; i < G_N_ELEMENTS (compressor_tests); i++)
| ^
gio/tests/converter-stream.c:1223:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1223 | for (i = 0; i < G_N_ELEMENTS (truncation_tests); i++)
| ^
gio/tests/converter-stream.c:1226:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1226 | for (i = 0; i < G_N_ELEMENTS (charset_tests); i++)
| ^
gio/tests/contenttype.c: In function ‘test_tree’:
gio/tests/contenttype.c:337:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
337 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
gio/tests/contexts.c: In function ‘test_context_specific_emit’:
gio/tests/contexts.c:379:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint32’ {aka ‘int’}
379 | for (i = 0; i < g_test_rand_int_range (1, 5); i++)
| ^
gio/tests/contexts.c:383:55: error: comparison of integer expressions of different signedness: ‘int’ and ‘guint’ {aka ‘unsigned int’}
383 | while (g_atomic_int_get (&observed_values[i]) != n)
| ^~
gio/tests/contexts.c:387:41: error: comparison of integer expressions of different signedness: ‘gint64’ {aka ‘long int’} and ‘guint64’ {aka ‘long unsigned int’}
387 | if (g_get_monotonic_time () > expiry)
| ^
1) Check that schedule_call_in_idle code branch of gdbusnamewatching.c
is working to call vanished handler in the thread which had watched the name
2) Check cancellation of vanished handler if the name is unwatched before
vanished callback is dispatched.
Closes#2011
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
`""` is not a valid path (`stat()` on it returns `ENOENT`). Previously,
a full `GLocalFile` was being created, which ended up resolving to
`$CWD`, through path canonicalisation. That isn’t right.
Fix it by creating a `GDummyFile` instead, and adding a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2328
Calling `dlopen()` with `libutil.so` makes the installed tests depend on
having glibc's development files installed. To avoid this, we can work
out the runtime library name at build time and `dlopen` that instead.
This approach is [taken from libfprint][1], thanks to Marco Trevisan.
[1]: f401f399a8
`ENXIO` can be returned from `open(2)` for special files (FIFOs, device
files and domain sockets) which are not backed by anything.
This fixes the error returned by `g_file_replace()` when trying to
replace such a file, so that it now matches the documentation.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These test all the functionality and combinations of flags I can think
of. They do not cover dynamic behaviour (for example, what would happen
if the source file is deleted by another process part-way through a call
to `g_file_replace()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `G_FILE_CREATE_REPLACE_DESTINATION` flag is equivalent to unlinking
the destination file and re-creating it from scratch. That did
previously work, but in the process the code would call `open(O_CREAT)`
on the file. If the file was a dangling symlink, this would create the
destination file (empty). That’s not an intended side-effect, and has
security implications if the symlink is controlled by a lower-privileged
process.
Fix that by not opening the destination file if it’s a symlink, and
adjusting the rest of the code to cope with
- the fact that `fd == -1` is not an error iff `is_symlink` is true,
- and that `original_stat` will contain the `lstat()` results for the
symlink now, rather than the `stat()` results for its target (again,
iff `is_symlink` is true).
This means that the target of the dangling symlink is no longer created,
which was the bug. The symlink itself continues to be replaced (as
before) with the new file — this is the intended behaviour of
`g_file_replace()`.
The behaviour for non-symlink cases, or cases where the symlink was not
dangling, should be unchanged.
Includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2325
Since a following commit is going to add a new test which references
Gitlab, so it’s best to move the URI bases inside the test cases.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For non-Linux UNIX systems, the label 'close_libutil:' in
'test_pollable_unix_pty()' will have no statement that goes with that
label. Just do a 'return' on non-Linux UNIX systems.
Expand an existing unit test to check that the target FD of a
`g_subprocess_launcher_take_fd()` call doesn’t get closed when
`g_subprocess_launcher_close()` is called. Only the source FD should be
closed by the parent process.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2332
Swedish as spoken in El Salvador is not listed in
/usr/share/i18n/SUPPORTED, and in any case is probably not what we meant.
A more plausible language code would be Swedish as spoken in Sweden.
Prompted by improving the Debian packaging of GLib to generate most of
the language codes mentioned in the tests, so that we can have better
test coverage.
Signed-off-by: Simon McVittie <smcv@collabora.com>
It’s not feasible to test that the require-same-user flag can cause
authentication to fail, as that would require the build environment to
have two users available. We can, however, test that it passes when
authenticating a client and server running under the same user account.
I have manually tested that the new flag works, by running the following
as user A:
```
`$prefix/gdbus-daemon --print-env &`
gdbus call --session --dest org.freedesktop.DBus --object-path /org/freedesktop/DBus --method org.freedesktop.DBus.ListNames
```
And then running the `gdbus call` command again as user B (with the same
value for `DBUS_SESSION_BUS_ADDRESS` in the environment), which
produces:
```
Error connecting: Unexpected lack of content trying to read a line
```
(an authentication rejection)
Commenting out the use of
`G_DBUS_SERVER_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER` from
`gdbusdaemon.c`, the `gdbus call` command succeeds for both users.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The GDBusConnectionFlags and GDBusServerFlags can affect how we carry
out authentication and authorization, either making it more or less
restrictive, so it's desirable to "fail closed" if a program is compiled
against a new version of GLib but run against an old version.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Convert all the call sites which use `g_memdup()`’s length argument
trivially (for example, by passing a `sizeof()`), so that they use
`g_memdup2()` instead.
In almost all of these cases the use of `g_memdup()` would not have
caused problems, but it will soon be deprecated, so best port away from
it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2319
Various tests have leaks where it isn't clear whether the data is
intentionally not freed, or leaked due to a bug. If we mark these
tests as TODO, we can skip them under AddressSanitizer and get the
rest to pass, giving us a baseline from which to avoid regressions.
Signed-off-by: Simon McVittie <smcv@collabora.com>
AddressSanitizer, UndefinedBehaviourSanitizer and probably others
involve adding instrumentation into the code under test, which doesn't
go well with LD_PRELOAD modules that absolutely need to be
self-contained.
Signed-off-by: Simon McVittie <smcv@collabora.com>
We format the message into a string twice, once for each byte-order,
but only return the one corresponding to the last byte-order to the
caller. This means we need to free the first one.
Signed-off-by: Simon McVittie <smcv@collabora.com>
- use watcher auto start flag.
- use watch_name_on_connection_with_closures.
- use an existing service name for auto start.
Closes#2011
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
Where the early call to g_socket_set_option() fails because of
check_socket() failing due to `inited` still being FALSE.
This brings 634b692 back into working order, by fixing the regression
introduced in 39f047e.
Co-authored-by: Ole André Vadla Ravnås <oleavr@gmail.com>
These two APIs are useful to publish an object which path content is not
controlled (e.g. dynamically built or coming from external source).
Closes#968
(Rebased and tweaked by Frederic Martinsons)
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
This makes the tests a whole lot closer to being valgrind-clean, and
revealed a few legitimate memory leaks in amongst the noise caused by
keeping the singleton GSettingsBackend around for the lifetime of the
process.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Split out XDG_CURRENT_DESKTOP handling to a separate function and make
sure that it drops all the invalid entries properly. Earlier a bad
entry could slip through the checks by sitting just after another bad
entry, like in env being set to `invalid1!:invalid2!`, where
`invalid2!` could slip the checks.
It occasionally fails in CI with output like:
```
196/274 glib:gio / gdbus-connection-slow FAIL 0.54 s (killed by signal 6 SIGABRT)
--- command ---
G_TEST_BUILDDIR='/builds/pwithnall/glib/_build/gio/tests' G_TEST_SRCDIR='/builds/pwithnall/glib/gio/tests' GIO_MODULE_DIR='' /builds/pwithnall/glib/_build/gio/tests/gdbus-connection-slow
--- stdout ---
\# random seed: R02S4eb186e89e2472eedd11538b37192543
1..2
\# Start of gdbus tests
\# Start of connection tests
Bail out! GLib-GIO:ERROR:../gio/tests/gdbus-connection-slow.c:98:test_connection_flush: assertion failed (error == NULL): Child process killed by signal 11 (g-exec-error-quark, 19)
--- stderr ---
**
GLib-GIO:ERROR:../gio/tests/gdbus-connection-slow.c:98:test_connection_flush: assertion failed (error == NULL): Child process killed by signal 11 (g-exec-error-quark, 19)
cleaning up pid 12991
```
which is not very helpful. Add some more debug output to print the
stdout and stderr of the child process, to hopefully give an insight
into why it’s dying with signal 11 (sigsegv).
I can’t reproduce the sigsegv locally.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
- When querying a TCP socket, getsockopt() may succeed but the resulting
`optlen` will be zero. This means we'd previously be reading
uninitialized stack memory in such cases.
- After a file-descriptor has gone through FD-passing, getsockopt() may
fail with EINVAL. At least this is the case with TCP sockets.
- While at it also use SOL_LOCAL instead of hard-coding its value.
These variables were already (correctly) accessed atomically. The
`volatile` qualifier doesn’t help with that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
And drop the `volatile` qualifier from the variables, as that doesn’t
help with thread safety.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
http://isvolatileusefulwiththreads.in/c/
It’s possible that the variables here are only marked as volatile
because they’re arguments to `g_once_*()`. Those arguments will be
modified in a subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
These tests were originally written using the output directly from a
fuzzer which had triggered the bugs we’re testing for. However, that
means they’re liable to no longer test what they’re intended to test if
the `GDBusMessage` parsing code is changed to (for example) check for
certain errors earlier in future.
It’s better to only have one invalidity in each binary blob, so change
the test messages to all be valid apart from the specific thing they’re
testing for.
The changes were based on reading the D-Bus specification directly:
https://dbus.freedesktop.org/doc/dbus-specification.html
During these changes I found one problem in
`test_message_parse_deep_header_nesting()` where it wasn’t actually
nesting variants in the header deeply enough to trigger the bug it was
supposed to be testing for. Fixed that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1963
This commit is the unmodified results of running
```
black $(git ls-files '*.py')
```
with black version 19.10b0. See #2046.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This incidentally also exercises the intended pattern for sending fds in
a D-Bus message: the fd list is meant to contain exactly those fds that
are referenced by a handle (type 'h') in the body of the message, with
numeric handle value n corresponding to g_unix_fd_list_peek_fds(...)[n].
Being able to send and receive file descriptors that are not referenced by
a handle (as in OpenFile here) is a quirk of the GDBus API, and while it's
entirely possible in the wire protocol, other D-Bus implementations like
libdbus and sd-bus typically don't provide APIs that make this possible.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/2074
Signed-off-by: Simon McVittie <smcv@collabora.com>
This test ensures that g_socket_client_connect_to_host_async() fails if
it is cancelled, but it's not cancelled until after 1 millisecond. Our
CI testers are hitting that race window, and Milan is able to reproduce
the crash locally as well. Switching it from 1ms to 0ms is enough for
Milan to avoid the crash, but not enough for our CI, so let's move the
cancellation to a GSocketClientEvent callback where the timing is
completely deterministic.
Hopefully fixes#2221
By default, when using g_subprocess_launcher_take_fd() to pass an
FD to a child, the GSubprocessLauncher object also takes ownership
of the FD in the parent, and closes it during finalize(). This is
a reasonable assumption in the majority of the cases, but sometimes
it isn't a good idea.
An example is when creating a GSubprocessLauncher in JavaScript:
here, the destruction process is managed by the Garbage Collector,
which means that those sockets will remain opened for some time
after all the references to the object has been droped. This means
that it could be not possible to detect when the child has closed
that same FD, because in order to make that work, both FDs
instances (the one in the parent and the one in the children) must
be closed. This can be a problem in, as an example, a process that
launches a child that communicates with Wayland using an specific
socket (like when using the new API MetaWaylandClient).
Of course, it isn't a valid solution to manually call close() in
the parent process just after the call to spawn(), because the FD
number could be reused in the time between it is manually closed,
and when the object is destroyed and closes again that FD. If that
happens, it will close an incorrect FD.
One solution could be to call run_dispose() from Javascript on the
GSubprocessLauncher object, to force freeing the resources.
Unfortunately, the current code frees them in the finalize()
method, not in dispose() (this is fixed in !1670 (merged) ) but it
isn't a very elegant solution.
This proposal adds a new method, g_subprocess_launcher_close(),
that allows to close the FDs passed to the child. To avoid problems,
after closing an FD with this method, no more spawns are allowed.
Fix: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1677
Expose a function that prepares an attribute query string to be passed
to g_file_query_info() to get a list of attributes normally copied with
the file. This function is used by the implementation of
g_file_copy_attributes, and it's useful if one needs to split
g_file_copy_attributes into two stages, for example, when nautilus does
a recursive move of a directory. When files are moved from the source
directory, its modification time changes. To preserve the mtime on the
destination directory, it has to be queried before moving files and set
after doing it, hence these two stages.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
The previous parsing code could read off the end of a URI if it had an
incorrect %-escaped character in.
Fix that, and more closely implement parsing for the syntax defined in
RFC 6874, which is the amendment to RFC 3986 which specifies zone ID
syntax.
This requires reworking some network-address tests, which were
previously treating zone IDs incorrectly.
oss-fuzz#23816
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This doesn't trigger the cancellation assertion issue when run locally
(the task didn't return yet, so the error is simply overwritten), but
perhaps it ever does in CI. Anyhow, it's good to have a cancellation
test.
This currently just implements the same functionality as the existing
`stat()`/`fstat()`/`fstatat()`/`lstat()` calls, although where a reduced
field set is requested it may return faster.
Helps: #1970
* Add g_tls_connection_get_channel_binding_data API call
* Add g_dtls_connection_get_channel_binding_data API call
* Add get_binding_data method to GTlsConnection class
* Add get_binding_data method to GDtlsConnection interface
* Add GTlsChannelBindingType enum with tls-unique and
tls-server-end-point types
* Add GTlsChannelBindingError enum and G_TLS_CHANNEL_BINDING_ERROR
quark
* Add new API calls to documentation reference gio-sections-common
This speeds up the `cancellable` test a little by stopping waiting for
the threads to start up as soon as they have started, rather than after
an arbitrary timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1764
This should fix some sporadic test failures in this test, although I
can’t be sure as I was unable to reproduce the original failure.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1764
It seems that allowing the GCancellable to be finalised in either the
main thread or the worker thread sometimes leads to crashes when running
on CI.
I cannot reproduce these crashes locally, and various analyses with
memcheck, drd and helgrind have failed to give any clues.
Fix this for this particular test case by deferring destruction of the
`GCancellable` instances until after the worker thread has joined.
That’s OK because this test is specifically checking a race between
`g_cancellable_cancel()` and disposal of a `GCancellableSource`.
The underlying bug remains unfixed, though, and I can only hope that we
eventually find a reliable way of reproducing it so it can be analysed
and fixed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Some editors automatically remove trailing blank lines, or
automatically add a trailing newline to avoid having a trailing
non-blank line that is not terminated by a newline. To avoid unrelated
whitespace changes when users of such editors contribute to GLib,
let's pre-emptively normalize all files.
Unlike more intrusive whitespace normalization like removing trailing
whitespace from each line, this seems unlikely to cause significant
issues with cherry-picking changes to stable branches.
Implemented by:
find . -name '*.[ch]' -print0 | \
xargs -0 perl -0777 -p -i -e 's/\n+\z//g; s/\z/\n/g'
Signed-off-by: Simon McVittie <smcv@collabora.com>
This ensures that we do really export the symbols for Visual
Studio-style builds, by using _GLIB_EXTERN to decorate the generated
prototypes and including config.h so that we are sure the symbols are
actually exported.
Sometimes this test was timing out due to the file monitor notifications
taking longer than the arbitrary 2s delay before ending the test and
checking its results at the end of `iclosed_cb()`.
Avoid that timing-dependence by ending the test when the expected file
monitor notifications are seen, or after a 10s timeout (if so, the test
is failed).
This makes the test run 4× faster in the normal case, as it’s no longer
waiting for a timeout to elapse if the file monitor notifications come
in sooner.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The test added for #1841 spawned 100000 threads. That was fine on a
desktop machine, but on a heavily loaded CI machine, it could result in
large (and unpredictable) slowdowns, resulting in the test taking over
120s in about 1 in 5 runs, and hence failing that CI pipeline due to a
timeout. When passing normally on CI, the test would take around 90s.
Here’s a histogram of time per iteration on a failing (timed out) test
run. Each iteration is one thread spawn:
Iteration duration (µs) | Frequency
------------------------+----------
≤100 | 0
100–200 | 30257
200–400 | 13696
400–800 | 1046
800–1000 | 123
1000–2000 | 583
2000–4000 | 3779
4000–8000 | 4972
8000–10000 | 1027
10000–20000 | 2610
20000–40000 | 650
40000–80000 | 86
80000–100000 | 10
100000–200000 | 2
>200000 | 0
There’s no actual need for the test to spawn 100000 threads, so rewrite
it to reuse a single thread, and pass new data to that thread.
Reverting the original commit (e4a690f5dd) reproduces the failure on
100 out of 100 test runs with this commit applied, so the test still
works.
The test now takes 3s, rather than 11s, to run on my computer, and has
passed when run with `meson test --repeat 1000 cancellable`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When multiple tests were run in parallel, this would race on its access
to `~/.dbus-keyrings` to authenticate with the D-Bus server, since the
keyring directory was not appropriately sandboxed to the unit test.
Use `G_TEST_OPTION_ISOLATE_DIRS` to automatically isolate each unit
test’s directory usage.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1954
Commit 721e385 left one remaining race in the filter test, with a
comment associated with it. Unfortunately, the (seemingly unrelated)
changes in #1841 to `GCancellable` seem to have made this remaining race
a lot more likely to fail on FreeBSD than before.
What’s likely to have happened (although I was unable to reproduce the
failure, due to not having a FreeBSD system; I was only able to
reproduce the problem as a 3/1000 failure on Linux, which is still worth
fixing) is that the atomic write of the `FilterData.serial` to be
expected by the filter function sometimes happened after the filter
function had executed, so the expected message was dropped and didn’t
result in an update to the `FilterData` state.
Rework the test so that instead of setting some expectations (on
`FilterData`) in one thread and then checking them in another thread,
the worker thread just unconditionally returns messages from the filter
function to the main thread, and then the main thread checks whether the
expected one has been filtered.
With this change applied, the `gdbus-connection` test passes 5000 times
in a row for me, on Linux; and doesn’t seem to fail any more on the
FreeBSD CI machines over a few runs. (Previously it failed on 4/5 runs.)
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #2092Fixes: #1957
The GIO tests memory-monitor-dbus and memory-monitor-portal use a number
of third party Python modules that may not be present when running the
test case.
Instead of failing due to missing imports, catch the ImportError and
mock a test case that skips. This can't use the usual unittest.skip
logic because the test case class itself uses a 3rd party module.
Closes#2083.
There are two memory monitor tests that use Python's unittest module directly,
but GLib tests should be outputting TAP. Use the embedded TAPTestRunner to
ensure that TAP is output for these tests too.
D-Bus filter functions run in a worker thread. The `gdbus-connection`
test was sharing a `FilterData` struct between the main thread and the
filter function, which was occasionally (on the order of 0.01% of test
runs) causing spurious test failures due to racing on reads/writes of
`num_handled`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #480
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #480
There’s a minor race condition between cancellation of a `GCancellable`,
and disposal/finalisation of a `GCancellableSource` in another thread.
Thread A Thread B
g_cancellable_cancel(C)
→cancellable_source_cancelled(C, S)
g_source_unref(S)
cancellable_source_dispose(S)
→→g_source_ref(S)
→→# S is invalid at this point; crash
Thankfully, the `GCancellable` sets `cancelled_running` while it’s
emitting the `cancelled` signal, so if `cancellable_source_dispose()` is
called while that’s high, we know that the thread which is doing the
cancellation has already started (or is committed to starting) calling
`cancellable_source_cancelled()`.
Fix the race by resurrecting the `GCancellableSource` in
`cancellable_source_dispose()`, and signalling this using
`GCancellableSource.resurrected_during_cancellation`. Check for that
flag in `cancellable_source_cancelled()` and ignore cancellation if it’s
set.
The modifications to `resurrected_during_cancellation` and the
cancellable source’s refcount have to be done with `cancellable_mutex`
held so that they are seen atomically by each thread. This should not
affect performance too much, as it only happens during cancellation or
disposal of a `GCancellableSource`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1841
`g_assert()` is compiled out if `G_DISABLE_ASSERT` is defined, and
`g_assert_*()` gives more detailed failure messages.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Distributions will likely want to update GLib before
GObject-Introspection, to avoid circular dependencies.
Signed-off-by: Simon McVittie <smcv@debian.org>
Clang warns about string+int not appending to the string (to try and
catch newbie mistakes). While this test didn’t expect that to happen, it
was substituting the same constant string in multiple places for no good
reason. Switch to a single static const string, which should also fix
the compiler warning.
We have to define the string length since it’s used in various
stack-allocated array lengths. This is the easiest fix without more
major refactoring of the test to be less 90s.
Also make things a bit more static.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When running under CI, each iteration takes so long that the total test
time is around 200s. If the CI runner is highly loaded, this can tip it
over the timeout of 360s.
Reduce the iteration counts unless running the test thoroughly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
Currently the test waits for 1s before deciding that a refcount has been
leaked. But slow test machines might take longer than that between
scheduling different threads to sort out the refcount, so increase the
timeout.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
bindfs is part of the setup process, so if it fails (as can happen if
the `fuse` kernel module has not been loaded — not much we can do about
that) then skip the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When testing that signals are delivered to the correct thread, and are
delivered the correct number of times, call `EmitSignal()` on the
`gdbus-testserver` to trigger a signal emission, and listen for that.
Previously, the code listened for `NameOwnerChanged` and connected to
the bus again to trigger emission of that. The problem with that is that
other things happening on the bus (for example, an old
`gdbus-testserver` instance disconnecting) can cause `NameOwnerChanged`
signal emissions. Sometimes, the `gdbus-threading` test was failing the
`signal_count == 1` assertion due to receiving more than one
`NameOwnerChanged` emission.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This is equivalent, but makes the loop exit conditions a little clearer,
since they’re actually in a `while` statement, rather than being a
`g_main_loop_quit()` call in a callback somewhere else in the file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
As with the previous commit, don’t stop iterating the `context` in
`test_delivery_in_thread_func()` until the unsubscription from a signal
is complete, and hence there’s a guarantee that no callbacks are pending
in the `thread_context`.
This commit uses the `GDestroyNotify` for
`g_dbus_connection_signal_subscribe()` as a synchronisation message from
the D-Bus worker thread to the `test_delivery_in_thread_func()` thread
to notify of signal unsubscription.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Previously, the code in `ensure_gdbus_testserver_up()` created a proxy
object and watched its `name-owner` to see when the
`com.example.TestService` name appeared.
This ended up subscribing to three signals (one of them for name
ownership, and two unused for properties of the proxy), and was racy. In
particular, the `name-owner` property could be set before all D-Bus
messages had been processed — it could have been derived from getting
the owner of the name, for example.
This left unprocessed messages hanging around in the `context`, but that
context was never iterated again, which essentially leaked the
references held by those messages. That included a reference to the
`GDBusConnection`.
The first part of the fix is to simplify the code to use
`g_bus_watch_name_on_connection()`, so there’s only one signal
subscription to worry about.
The second part of the fix is to use the `GDestroyNotify` callback for
the watch data to be notified of when all D-Bus traffic has been
processed and the signal unsubscription is complete. At this point, it’s
guaranteed that there are no idle callbacks pending in the
`GMainContext`, since the `GDestroyNotify` callback is the last one
invoked on the `GMainContext`.
Essentially, this commit uses the `GDestroyNotify` callback as a
synchronisation message between the D-Bus worker thread and the thread
calling `ensure_gdbus_testserver_up()`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1515
Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
The loops should continue iterating if the timeout is non-zero and we're
still waiting for the updated value. Otherwise, if things break, we'll
be waiting until we receive a value that never arrives.
This reverts commit b6d8efbebc.
This GLib API is good, but the implentation is not ready, so there's no
reason to commit to the API in GLib 2.64. We can reland again when the
implementation is ready.
There are three problems: (a) The glib-networking implementation normally
works, but the test has been broken for a long time. I'm not comfortable
with adding a major new feature without a working test. This is
glib-networking#104. (b) The WebKit implementation never landed. There
is a working patch, but it hasn't been accepted upstream yet. This API
isn't needed in GLib until WebKit is ready to start using it.
https://bugs.webkit.org/show_bug.cgi?id=200805. (c) Similarly, even if
the WebKit API was ready, that itself isn't useful until an application
is ready to start using it, and the Epiphany level work never happened.
Let's try again for GLib 2.66. Reverting this commit now just means we
gain another six months before committing to the API forever. No reason
to keep this in GLib 2.64 when nothing is using it yet.
This complements the `--glib-min-required` argument, just like the
`GLIB_MIN_REQUIRED` and `GLIB_MAX_ALLOWED` preprocessor defines which
control access to APIs in C.
Currently, it doesn’t affect code generation at all. When we next change
code generation, we will need to gate any new API usage on this
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1993
This makes it consistent with the `GLIB_MIN_REQUIRED` defines which are
used for API stability/versioning in C code.
It doesn’t otherwise change the behaviour of the `--glib-min-version`
argument.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1993
This fixes the following build failure on FreeBSD:
```
In file included from ../gio/tests/win32-appinfo.c:24:
/usr/include/malloc.h:3:2: error: "<malloc.h> has been replaced by <stdlib.h>"
#error "<malloc.h> has been replaced by <stdlib.h>"
```
Hopefully it doesn’t break Windows.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As with all D-Bus signal subscriptions, it’s possible for a signal
callback to be invoked in one thread (T1) while another thread (T2) is
unsubscribing from that signal. In this case, T1 is the main thread, and
T2 is the D-Bus connection worker thread which is unsubscribing all
signals as it’s in the process of closing.
Due to this possibility, all `user_data` for signal callbacks needs to
be referenced outside the lifecycle of the code which
subscribes/unsubscribes the signal. In other words, it’s not safe to
subscribe to a signal, store the subscription ID in a struct,
unsubscribe from the signal when freeing the struct, and dereference the
struct in the signal callback. The data passed to the signal callback
has to have its own strong reference.
Instead, it’s safe to subscribe to a signal and add a strong reference
to the struct, store the subscription ID in that struct, and unsubscribe
from the signal when the last external reference to your struct is
dropped. That unsubscription should break the refcount cycle between the
signal connection and the struct, and allow the struct to be completely
freed. Only with that approach is it safe to dereference the struct in
the signal callback, if there’s any possibility that the signal might be
unsubscribed from a separate thread.
The tests need specific additional main loop cycles to completely emit
the NameLost signal callback. Ideally they need refactoring, but this
will do (1000 test cycles passed).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #978
1) When parsing the executable name out of the command line,
see if the executable is rundll32.exe. If that is the case,
use the DLL name from its first argument as the "executable"
(this is used only for matching, and Windows Registry matches
these programs by their DLLs, so this is correct; for running
the application GLib would still use the command line, with
rundll32).
2) If an app runs with rundll32, ensure that rundll32 arguments
can be safely quoted. Otherwise GLib will break them with its
protective quotation.
Currently the code generated by gdbus-codegen uses
G_DBUS_CALL_FLAGS_NONE in its D-Bus calls, which occur for each method
defined by the input XML, and for proxy_set_property functions. This
means that if the daemon which implements the methods checks for
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION and only does interactive
authorization if that flag is present, users of the generated code have
no way to cause the daemon to use interactive authorization (e.g. polkit
dialogs).
If we simply changed the generated code to always use
G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, its users would have no
way to disallow interactive authorization (except for manually calling
the D-Bus method themselves).
So instead, this commit adds a GDBusCallFlags argument to method call
functions. Since this is an API break which will require changes in
projects using gdbus-codegen code, the change is conditional on the
command line argument --glib-min-version having the value 2.64 or
higher.
The impetus for this change is that I'm changing accountsservice to
properly respect G_DBUS_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION, and
libaccountsservice uses generated code for D-Bus method calls. So
these changes will allow libaccountsservice to continue allowing
interactive authorization, and avoid breaking any users of it which
expect that. See
https://gitlab.freedesktop.org/accountsservice/accountsservice/merge_requests/46
It might make sense to also let GDBusCallFlags be specified for property
set operations, but that is not needed in the case of accountsservice,
and would require significant work and breaking API in multiple places.
Similarly, the generated code currently hard codes -1 as the timeout
value when calling g_dbus_proxy_call*(). Add a timeout_msec argument so
the user of the generated code can specify the timeout as well.
Also, test this new API. In gio/tests/codegen.py we test that the new
arguments are generated if and only of --glib-min-version is used with a
value greater than or equal to 2.64, and in gio/tests/meson.build we
test that the generated code with the new API can be linked against.
The test_unix_fd_list() test also needed modification to continue
working now that we're using gdbus-test-codegen.c with code generated
with --glib-min-version=2.64 in one test.
Finally, update the docs for gdbus-codegen to explain the effect of
using --glib-min-version 2.64, both from this commit and from
"gdbus-codegen: Emit GUnixFDLists if an arg has type `h` w/
min-version".
For the check "if (error != NULL)" to work as expected, the
create_server() (and create_server_full()) functions need to make
sure to return an error for all the possible failures, but this
might not always be the case.
Catch all the failures by testing for a non-NULL return value if there
was no error.
They didn’t match the prototype generated by `gdbus-codegen`, which
meant that the FD list was being iterated incorrectly. Secondly, the
document ID list returned by the method was not NULL terminated, which
could lead to reading off the end of the list.
Somehow, neither of these bugs caused problems on Linux, but they did
cause problems on FreeBSD.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1983
Reduce the number of iterations of things sent over a mock session bus
from different threads, to avoid the test spending quite so long
contested over the `gsignal.c` lock.
The test now takes about 10 seconds, according to `time`, rather than
around 100 or longer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By removing the cached global proxy in gdocumentportal.c, we can
re-enable the checks for proper shutdown of the session bus connection
in the dbus-appinfo.c test.
We can't use session_bus_down() in the test since gdocumentportal.c
holds a reference to the session bus connection, preventing it from
being finalised.
Those tests require Python, gobject-introspection and python-dbusmock
making them unsuitable to be run within the uninstalled test suite.
There are no restrictions of dependencies when it comes to installed
tests so use those to exercise GMemoryMonitor.
This is a reimplementation of commit
4aba03562b from Will Thompson, but
conditional on the caller passing `--glib-min-version 2.64` to
`gdbus-codegen` to explicitly opt-in to the new behaviour.
From the commit message for that commit:
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
Includes a unit test too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1726
This can be used by callers to opt-in to backwards-incompatible changes
to the behaviour or output of `gdbus-codegen` in future. This commit
doesn’t introduce any such changes, though.
Documentation and unit tests included.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1726
Skipped tests use "77" as the return value, so return 77 instead of 0
when the static-link.py test gets skipped because of a missing
environment variable.
If the fuse module is loaded but /dev/fuse doesn't exist, it's likely
that we're running in a rootless container, or a badly setup one, and we
won't be able to use fuse, so skip this test.
This happened on my local system using podman running as a normal user,
but this apparently works as expected in our CI[1].
[1]: https://gitlab.gnome.org/GNOME/glib/merge_requests/466
Add a Python-based test wrapper for the `gdbus-codegen` executable,
similar to the existing tests for `glib-mkenums` and friends.
Add a few basic tests to begin with, but this doesn’t approach anywhere
near full coverage.
The next step is to move the existing Meson-based `gdbus-codegen` tests
from `gio/tests/meson.build` into the Python test suite.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1612
Those tests seem to regularly fail because a timeout (which we're
measuring outside the function that times out) is too long, which can
happen when the system is busy.
Don't run those tests unless "thorough" tests are requested. This
disables those tests by default.
Bail out! GLib-GIO:ERROR:../gio/tests/socket.c:1167:test_timed_wait: assertion failed (poll_duration < 112000): (114254 < 112000)
Bail out! GLib-GIO:ERROR:../gio/tests/cancellable.c:167:on_mock_operation_ready: assertion failed (error == (g-io-error-quark, 19)): error is NULL
Now we're returning the file type again, we need to mask it out to
compare with the mode. We can also check that the statbuf said the file
is a regular file.
Related: #1934
This is the analogue of commit 7c4e6e9fbe, but applied to the
`GDBusMessage` parser, which does its own top-level parsing of the
variant format in D-Bus messages.
Previously, this code allowed arbitrary recursion of variant containers,
which could lead to a stack overflow. Now, that recursion is limited to
64 levels, as per the D-Bus specification:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-marshaling-signature
This includes a new unit test.
oss-fuzz#14870
Signed-off-by: Philip Withnall <withnall@endlessm.com>
