This makes code that sets no flags a bit more self-documenting:
using G_TYPE_FLAG_NONE makes it clearer that no special behaviour is
required than literal 0, and clearer that there is no weird casting
between types than (GTypeFlags) 0.
GTypeFlags and GTypeFundamentalFlags occupy the same namespace and the
same bitfield, so I intentionally haven't added
G_TYPE_FUNDAMENTAL_FLAGS_NONE.
Signed-off-by: Simon McVittie <smcv@collabora.com>
As with commit 0932f71460, which did this for refs/unrefs of the
object in `g_object_notify()`, we need to do a similar thing for
refs/unrefs of the instance with `g_signal_emit()`, for all the same
reasons.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Pass arguments to them so that they take minimal time. This will not
produce useful performance profiling results, but will smoketest that
the tests still run, don’t crash, and therefore probably aren’t
bitrotting too badly.
This is useful because a fair amount of work has gone into these
performance tests, and they’re useful every few years to analyse and
compare GObject performance. We don’t want them to bitrot between uses.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When running the test with `-s 0` it would previously crash. Fix that,
and make it so that it only does a single test run in that case.
This will be useful in an upcoming commit for smoketesting the test to
avoid bitrot.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a partial revert of commit fa8c7c0da using the approach
suggested (and tested) by Kjell Ahlstedt.
It is intended to be temporary pending a proper dig into what’s causing
the regression, just so we can get the 2.73.1 release out.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2672
Coverity notices the `g_object_unref()` call in `g_object_notify()`, but
not the paired `g_object_ref()` call. It therefore incorrectly assumes
that every call to `g_object_notify()` frees the object. This causes a
lot (hundreds) of false positive reports about double-frees or
use-after-frees.
I can’t find a way to fix this using a model file, so the other options
are:
* Manually mark every report as a false positive and keep updating them
as the code changes over time. This would take a lot of maintainer
effort.
* Comment out the `g_object_ref()`/`g_object_unref()` calls when
running static analysis (but not in a normal production build). This
is ugly, but cheap and shouldn’t impact maintainability much.
So this commit implements option 2.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This prevents `-Wunused-function` warnings on platforms which don’t have
`HAVE_OPTIONAL_FLAGS` defined.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
g_object_new_with_custom_constructor needs to handle
freezing notifications in the same way as
g_object_new_internal.
Fixing a bug pointed out by Christian Hergert.
The corner-case we are handling here is that
we don't freeze the notify queue in g_object_init
(because there's no custom ->notify vfunc, but
then we gain a notify handler during instance
init, and instance init also triggers a
notification. Handle this by jit freezing
notification in g_object_notify_by_spec_internal.
Note that this is bad code - instance init really
shouldn't be doing things like this.
Testcase included.
Fixes: #2665
We need to match the conditions in g_object_init
for when we already have a freeze. Without that,
we underflow the freeze count and trigger a
warning.
Fixes: #2666
Beef up the singleton testcase to reproduce a
freeze count underflow when setting properties
at construction time, with a custom constructor.
Helps: #2666
These are deprecated, but it’s easy enough to test them anyway. This
bumps up code coverage a bit and hopefully ensures we don’t accidentally
regress on them in future.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
At the moment these tests basically just ensure that the program’s
compiled properly and doesn’t crash on startup. They don’t check
functionality very deeply.
But they’re a start.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This has been documented in `man gobject-query` for a long time, but
seemingly never implemented.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This makes the output a lot nicer to read:
```
│
├void
│
├GInterface
│ │
│ └GTypePlugin
│
├gchar
⋮
```
rather than
```
|
`void
|
`GInterface
|
`GTypePlugin
|
`gchar
⋮
```
It includes a change to correctly use vertical tees at the top level by
correctly setting the sibling node rather than always setting it to
zero.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This doesn’t change the tests’ behaviour, but moves them to a slightly
more logical location.
They are still not installed or run by default.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1434
Install the properties with a mixture of
g_object_class_install_properties and
g_object_class_install_properties, and verify
that finding them still works, regardless of
whether we use string literals or not.
When the param specs are provided as an array
with g_object_class_install_properties, keep
a copy of that array around and use it for
looking up properties without the param spec
pool.
Note that this is an opportunistic optimization -
currently, it only works for properties of the
class itself, not for parent classes, and it
only works if the property names are identical
string literals (we're at the mercy of the linker
for that).
If we don't get lucky, we fall back to using
the pspec pool as usual.
This may fix Coverity assuming that pspecs are leaked, which is causing
tens and tens of false positives in the latest Coverity reports for
GLib.
Ensure that the pspecs are sunk (if floating) even if adding them to the
class fails (due to validation failure or an identically named property
already existing).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This reverts commit 0ddea2d8e2.
The commit was based on the misunderstanding that types
declared with G_DECLARE_FINAL_TYPE are actually non-derivable.
But that is only the case for types defined with
G_DEFINE_FINAL_TYPE.
Fixes: #2661
If we have no nontrivial notify vfunc, and no signal
handlers for notify, we don't need to maintain the
notify queue. No need to notify if nobody's listening.
Check whether an object has a nontrivial notify vfunc
and avoid creating and updating the notify queue if
it doesn't. We know that there can be no notify signal
handlers at this point. No need to notify if nobody's
listening.
We currently keep a flag for whether an object has
ever had any signal handlers. But even if it had signal
handlers, it may not have any notify handlers. Keep that
information separately, so we can speed up property setting.
According to the commit that introduced these
calls (4b334ef8f1), we are checking
the refcount here to avoid calling g_object_ref
when the refcount is 0, in the rare case that
notification would be triggered during finalize.
But we are now freezing notifications during
finalize, and after recent changes, we no longer call
g_object_ref for notification while a freeze is
in place.
We only need to take a ref on the object when
we call out to external code (ie around
->dispatch_properties_changed). If we avoid
the signal emission, we can avoid the ref/unref
too. This is not currently happening, but
might in the future.
A small reorg that reduces the code and matches
what we do for object_get_property.
Note that as a consequence of this change, we now
check the deprecated flag on the redirected property,
not on the original when setting properties. This
matches what we were already doing for getting
properties.
The code that emits property deprecation warnings
rarely runs, and doesn't need to be inlined
everywhere. It is enough to inline the check for
the deprecation flag.
It is safe not to copy arguments here,
because we are not emitting any signals
before we are done setting the values
as properties.
This matches what we do for g_object_new now.
We can safely use the values without copying here.
This is safe because we are not emitting any
signals before we are done setting the values
as properties.
These have all been added manually, as I’ve finished all the files which
I can automatically detect.
All the license headers in this commit are for LGPL-2.1-or-later, and
all have been double-checked against the license paragraph in the file
header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files gobject/tests/*.[ch] | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
None of these messages are particularly helpful, but they increase the
overall test log output size, which has to be stored by the CI for every
test run.
With these messages removed, the size of a full test log is reduced from
6.5MB to 1.8MB for me.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Modified by Philip Withnall to omit the subdirectory and drop the
`refcount` suite as both seem like unnecessary over-categorisation.
Related to issue #1434
This avoids walking the construct params list
one extra time just to count when constructing
objects, for a small speedup of object construction
in the presence of construct params.
Move the `if` into the precondition assertion, eliminating one line of
code and making the function preconditions clearer to static analysers.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Avoid GValue transformation when we can, using
the new value_is_valid vfunc.
This is particularly useful for string properties,
where g_value_transform will make a copy of the string.
In constrast to value_validate, this one does not
modify the passed-in value, so we can avoid the cost
of copying the GValue beforehand.
It is optional, but we set it for most of the
builtin pspec types.
In several places we do paired calls of g_value_init
and g_value_unset, both of which peek the value table.
We can avoid half of that cost by remembering the value
table, instead of looking it up again.
This uses the new G_VALUE_COLLECT_INIT2 macro.
The user data parameters in callbacks need to be named user_data to
generate correct closure attributes in the introspection data. This
updates parameters missed in GNOME/glib!2633.
As noticed by Christian Hergert: We can reduce
some overhead by checking for exact type
equality first. According to Christian, around
3% of g_type_is_a calls are exact equalities.
