This is a variant of g_utf8_validate() which requires the length to be
specified, thereby allowing string lengths up to G_MAXSIZE rather than
just G_MAXSSIZE.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Previously, GVariant has allowed ‘arbitrary’ recursion on GVariantTypes,
but this isn’t really feasible. We have to deal with GVariants from
untrusted sources, and the nature of GVariantType means that another
level of recursion (and hence, for example, another stack frame in your
application) can be added with a single byte in a variant type signature
in the input. This gives malicious input sources far too much leverage
to cause deep stack recursion or massive memory allocations which can
DoS an application.
Limit recursion to 128 levels (which should be more than enough for
anyone™), document it and add a test. This is, handily, also the limit
of 64 applied by the D-Bus specification (§(Valid Signatures)), plus a
bit to allow wrapping of D-Bus messages in additional layers of
variants.
oss-fuzz#9857
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The X-Flatpak-RenamedFrom key is used in .desktop files to identify past
names for the desktop file. It is defined to be a list of strings.
However, there was previously no correct way to retrieve a list of
strings from the GKeyFile wrapped by GDesktopAppInfo, short of
re-parsing the file with GKeyFile.
Note that doing something like:
g_strsplit (g_desktop_app_info_get_string (...), ";", -1)
is not correct: the raw value "a\;b;" represents the one-element list
["a;b"], but g_key_file_get_string() rejects the sequence "\;", and so
g_desktop_app_info_get_string() returns NULL in this case. (Of course, a
.desktop file with a semicolon in its name is a pathological case.)
Add g_desktop_app_info_get_string_list(), a trivial wrapper around
g_key_file_get_string_list(), similar to g_desktop_app_info_get_string()
and co.
The change from g_key_file_free() to g_key_file_unref() in the test is
needed because g_key_file_free() clears the contents of the keyfile.
This is fine for all the fields which are eagerly loaded and copied into
GDesktopAppInfo, but not when we want to access arbitrary stuff from the
keyfile.
This is detected by Debian's Lintian tool, which suggests
"allows one to" as a replacement. I've rephrased the documentation
in question to avoid both of those.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Expands to the GNU C fallthrough statement attribute if the compiler is gcc.
This allows declaring case statement to explicitly fall through in switch
statements. To enable this feature, use -Wimplicit-fallthrough during
compilation.
There are many cases where a default TLS database is not able to be
defined within the constraints of a system. For example glib-networking
(or glib-openssl) cannot retrieve the default certificate store on iOS
or Android and need to be initialized from a cert file of certificates
bundled with the application.
Previously GStreamer was relying on a custom patch to glib-networking to
populate the default database from the file pointed to by the
CA_CERTIFICATES environment variable however the mechanism that enabled
this was recently remove from glib-networking.
Adding a more generic g_tls_backend_set_default_database() API allows
application developers to override the default database using their own
certificates as well as allowing equivalent functionality on Android/iOS
(or others) as on the default database handling Linux.
Fixes https://gitlab.gnome.org/GNOME/glib-networking/issues/35
The goal of this commit is to reduce differences between the autotools and meson build.
With autotools AC_FUNC_ALLOCA was used which defines HAVE_ALLOCA_H, HAVE_ALLOCA,
C_ALLOCA. meson tried to replicate that with has_function() but alloca can be a macro
and and is named _alloca under Windows. Since we require a working alloca anyway
and only need to know if the header exists replace AC_FUNC_ALLOCA with a simple
AC_CHECK_HEADERS.
There is still one user of HAVE_ALLOCA in the embedded gnulib, but since alloca is
always provided through galloca.h just force define HAVE_ALLOCA there and add a comment.
The docs were mentioning alloca as an example for cross compiling. Since that variable no
longer exists now replace it with another one.
They should either be generated at build time, or ignored completely,
depending on the presence of --[enable|disable]-man.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
A lot of GLib APIs provide a string length and explicitly say that the strings
are not NUL terminated. For instance, parsing XML using GMarkupParser or
reading packed binary strings from mmapped data files.
The last part of the reference counting saga.
Now that we have:
- reference counter types
- reference counted allocations
we can finally add reference counted strings using reference counted
allocations to avoid creating a new String type, and reimplementing
every single string-based API.
GArcBox is the atomic reference counting version of GRcBox. Unlike
GRcBox, the reference acquisition and release on GArcBox are guaranteed
to be atomic, and thus they can be performed from different threads.
This is similar to Rust's Arc<Box<T>> combination of traits.
It is useful to provide a "reference counted allocation" API that can
add reference counting semantics to any memory allocation. This allows
turning data structures that usually are placed on the stack into memory
that can be placed on the heap without:
- adding a public reference count field
- implementing copy/free semantics
This mechanism is similar to Rust's Rc<Box<T>> combination of traits,
and uses a Valgrind-friendly overallocation mechanism to store the
reference count into a private data segment, like we do with GObject's
private instance data.
meson.build was already passing --rebuild-types option but not
Makefile.am. Copy the IGNORE_HFILES list from meson.build because it was
outdated in Makefile.am and it's causing build issues when using the
generated gio.types file because it would contain win32 types when
building on linux.
Add an app-launching function which allows standard file descriptors
to be passed to the child process.
This will be used by gnome-shell to pass systemd journal descriptors
as stdout/stderr. gnome-shell's child_setup function can then be
eliminated, which will enable use of the posix_spawn optimized
gspawn codepath for desktop app launching.
Add a new process spawning function variant which allows the caller
to pass specific file descriptors for stdin, stdout and stderr.
It is otherwise identical to g_spawn_async_with_pipes.
Allow the same fd to be passed in multiple parameters. To make this
workable, the child process logic that closes the fd after the first time
it has been dup2'ed needed tweaking; we now just set those fds to be
closed upon exec using the CLOEXEC flag. Add a test for this case.
This will be used by gnome-shell to avoid performing equivalent
dup2 actions in a child_setup function. Dropping use of child_setup will
enable use of an upcoming optimized process spawning codepath.
These generate basic .c and .h files containing the GDBusInterfaceInfo
for a D-Bus introspection XML file, but no other code (no skeletons,
proxies, GObjects, etc.).
This is useful for projects who want to describe their D-Bus interfaces
using introspection XML, but who wish to implement the interfaces
manually (for various reasons, typically because the skeletons generated
by gdbus-codegen are too simplistic and limiting). Previously, these
projects would have had to write the GDBusInterfaceInfo manually, which
is painstaking and error-prone.
The new --interface-info-[body|header] options are very similar to
--[body|header], but mutually exclusive with them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
We have a common pattern for reference counting in GLib, but we always
implement it with ad hoc code. This is a good chance at trying to
standardise the implementation and make it public, so that other code
using GLib can take advantage of shared behaviour and semantics.
Instead of simply taking an integer variable, we should create type
aliases, to immediately distinguish the reference counting semantics of
the code; we can handle mixing atomic reference counting with a
non-atomic type (and vice versa) by using differently signed values for
the atomic and non-atomic cases.
The gatomicrefcount type is modelled on the Linux kernel refcount_t
type; the grefcount type is added to let single-threaded code bases to
avoid paying the price of atomic memory barriers on reference counting
operations.
It's mostly not used anymore and doesn't do what it says it does.
The docs state that it affects GList, GSList, GNode, GMemChunks, GSignal,
GType n_preallocs and GBSearchArray while:
* GList, GSList and GNode use GSlice and are not affected
* GMemChunks is gone
* GType npreallocs is ignored
It also states that it can be used to force the usage of g_malloc/g_free,
which is handled by G_SLICE=always-malloc now.
The only places where it's used is in signal handling through GBSearchArray
and in GValueArray (deprecated). Since it's unlikely that anyone wants to
reduce allocation sizes just for those cases remove the build option.
ENABLE_GC_FRIENDLY_DEFAULT was supposed to set the default for the gc friendliness
while still allowing to force enable it at runtime with G_DEBUG=gc-friendly.
With commit 943a18b564 (6 years ago) things were changed to always set it
according to the content of G_DEBUG in glib_init(), making the default unused.
Since nobody complained since then just remove the macro and the build option.
Add a test macro that allows comparing two floating point values for
equality within a certain tolerance.
This macro has been independently reimplemented by various projects:
* Clutter
* Graphene
* colord
https://gitlab.gnome.org/GNOME/glib/issues/914
It's a synonym of G_VOLUME_IDENTIFIER_KIND_UNIX_DEVICE.
It doesn't change anything except not feeling dirty from using a wrongly
prefixed constant for the object type.
See: #182
GVfsUDisks2VolumeMonitor handles x-gvfs-hide/x-gvfs-show mount options
used to overwrite our heuristics whether the mount should be shown, or
hidden. Unfortunately, it works currently only for mounts with
corresponding fstab entries, because the options are read over
g_unix_mount_point_get_options. Let's introduce g_unix_mount_get_options
to allow reading of the options for all sort of mounts (e.g. created
over pam_mount, or manually mounted).
(Minor fixes to the documentation by Philip Withnall
<withnall@endlessm.com>.)
https://bugzilla.gnome.org/show_bug.cgi?id=668132
This is a combination of g_hash_table_lookup_extended() and
g_hash_table_steal(), so that users can combine the two to reduce code
and eliminate a pointless second hash table lookup by
g_hash_table_steal().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795302
Getting the canonical filename is a relatively common
operation when dealing with symbolic links.
This commit exposes GLocalFile's implementation of a
filename canonicalizer function, with a few additions
to make it more useful for consumers of it.
Instead of always assuming g_get_current_dir(), the
exposed function allows passing it as an additional
parameter.
This will be used to fix the GTimeZone code to retrieve
the local timezone from a zoneinfo symlink.
(Tweaked by Philip Withnall <withnall@endlessm.com> to drop g_autofree
usage and add some additional tests.)
https://bugzilla.gnome.org/show_bug.cgi?id=111848
For a long time we've had it as 'common knowledge' that criticals are
for programmer errors and warnings are for external errors, but we've
never documented that. Do so.
(Modified by Philip Withnall <withnall@endlessm.com> to apply cleanly to
master; rearranged to fit in with current master documentation.)
https://bugzilla.gnome.org/show_bug.cgi?id=741049
This is a non-trivial accessor which gets the identifier string used to
create the GTimeZone — unless the string passed to g_time_zone_new() was
invalid, in which case the identifier will be `UTC`.
Implementing this required reworking how timezone information was loaded
so that the tz->name is always set at the same time as tz->t_info, so
they are in sync. Previously, the tz->name was unconditionally set to
whatever was passed to g_time_zone_new(), and then not updated if the
tz->t_info was eventually set to the default UTC information.
This includes tests for the new g_time_zone_get_identifier() API, and
for the g_date_time_get_timezone() API added in the previous commit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795165
This is a bit awkward. A more elegant solution would have
ignored *all* headers and then *un-ignored* some of them
if some conditions were met.
Sadly, we cannot really ignore all headers and then "unignore"
them: that's not how arrays in Meson work.
https://bugzilla.gnome.org/show_bug.cgi?id=794557
Similarly to how glib-compile-resources can call xmllint to eliminate
whitespace in XML files to reduce their size inside a GResource, we can
use json-glib-format to achieve the same result.
The mechanism for using json-glib-format is the same, with a separate
environment variable if we want to direct glib-compile-resources to a
version of json-glib-format that is not the one in the PATH.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
g_key_file_get_locale_string() returns a translated string from the
keyfile. In some cases, it may be useful to know the locale that that
string came from.
Add a new API, g_key_file_get_locale_for_key(), that returns the locale
of the string.
Include tests.
(Modified by Philip Withnall to rename the API and fix some minor review
issues. Squash in a separate test case commit.)
https://bugzilla.gnome.org/show_bug.cgi?id=605700
Recent changes has extended the functionality of `gdbus-codegen`
by implementing new options.
This patch extends the documentation including the behaviour of
the new options along the old ones.
(Wording tweaked by Philip Withnall before pushing.)
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The tool was ported to Python, but we should not mention the programming
language used, in case we port it to some other language in the distant
future.
This is a variant of g_file_get_path() which returns a const string to
the caller, rather than transferring ownership.
I've been carrying `gs_file_get_path_cached()` in libgsystem and it
has seen a lot of use in the ostree and flatpak codebases. There are
probably others too.
I think language bindings like Python/Gjs could also use this to avoid
an extra malloc (i.e. we could transparently replace
`g_file_get_path()` with `g_file_peek_path()`.
(Originally by Colin Walters. Tweaked by Philip Withnall to update to
2.56, change the function name and drop the locking.)
https://bugzilla.gnome.org/show_bug.cgi?id=767976
gdbus-codegen's options only allow a simultaneous header and source
code generation.
A `--header` and `--body` options have been added along with the
`--output` option which allow separate C header and code
generation.
These options cannot be used in addition to the old options such
as `--generate-c-code`, `--generate-docbook` or
`--output-directory`.
These options have also been added to gdbus-codegen's documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The #pragma once is widely supported preprocessor directive that can
be used instead of include guards.
This adds support for using optionally this directive instead of
include guards.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The optparse module is deprecated since version 2.7 and the
development continues with the argparse.
The code has been moved from optparse to argparse when parsing
command-line options. This has also led to the deprecation of the
`--xml-files`, and positional arguments should be used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
Custom desktop file fields may be translated, but there is currently
no non-hacky way to look up the localized value; fill get gap with
a small wrapper around g_key_file_get_locale_string().
https://bugzilla.gnome.org/show_bug.cgi?id=779413
Hopefully discouraging people from overriding that and building with it
enabled.
Pro-tip: GLib will break.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791622
In order to enrich information displayed by GApplication command line
handling when --help is invoked, 3 new methods are proposed:
. g_application_set_option_context_parameter_string
. g_application_set_option_context_summary
. g_application_set_option_context_description
Those methods interact with the GApplication's internal GOptionContext
which is created for command line parsing in g_application_parse_command_line.
(please refer to the GOptionContext class for more information about option
context, parameter string, summary and description.)
To illustrate the 3 methods, an example is provided:
. gapplication-example-cmdline4.c
Weak-pointers are currently lacking g_set_object() & g_clear_object()
helpers equivalent. New functions (and macros, both are provided) are
convenient in many case, especially for the property's notify-on-set
pattern:
if (g_set_weak_pointer (...))
g_object_notify (...)
Inspired by Christian Hergert's original implementation for
gnome-builder.
https://bugzilla.gnome.org/show_bug.cgi?id=749527
Putting them in the same section causes gtk-doc to mix their properties
together in a single listing, which is confusing.
Since having them in a single section doesn’t really add anything, split
them out to one class per section.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791334
The example code defines an interface with three methods. The preceding text
reads 'This interface defines two methods'. This appears to be because the
example code was changed without updating the surrounding text.
https://bugzilla.gnome.org/show_bug.cgi?id=790830
This adds g_file_load_bytes() to make it more convenient to
load the contents of a GFile as GBytes.
It includes a special casing for gresources to increase the
chances that the GBytes directly references the embedded data
instead of copying to the heap.
https://bugzilla.gnome.org/show_bug.cgi?id=790272
It's a very common pattern to see code that looks like this in
dispose() or finalize() implementations:
if (priv->source_id > 0)
{
g_source_remove (priv->source_id);
priv->source_id = 0;
}
This API allows to accomplish the same goal with a single line:
g_clear_handle_id (&priv->source_id, (GClearHandleFunc) g_source_remove);
Thanks to Emmanuele Bassi <ebassi@gnome.org> for making the patch
generic.
https://bugzilla.gnome.org/show_bug.cgi?id=788489
This is needed by gnome-control-center and gnome-settings-daemon; it
makes existing checks from gunixmounts.c public.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788927
It adds support for source-specific multicast IGMPv3.
Allow receiving data only from a specified source when joining
a multicast group.
g_socket_join_multicast_group_ssm can be called multiple times
to allow receiving data from more than one source.
Support IPv4 and IPv6.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740791
We should show how to properly use glib-mkenums with Autotools, in
the hope that fewer people will be caught cargo-culting rules written
in the late '90s.
https://bugzilla.gnome.org/show_bug.cgi?id=788948
We should show how to properly use glib-genmarshal with Autotools, in
the hope that fewer people will be caught cargo-culting rules written
in the late '90s.
https://bugzilla.gnome.org/show_bug.cgi?id=788948
This supports a subset of ISO 8601 since that is a commonly used standard for
storing date and time information. We support only ISO 8601 strings that contain
full date and time information as this would otherwise not map to GDateTime.
This subset includes all of RFC 3339 which is commonly used on the Internet and
the week and ordinal day formats as these are supported in the GDateTime APIs.
(Minor modification by Philip Withnall to change API versions from 2.54
to 2.56.)
https://bugzilla.gnome.org/show_bug.cgi?id=753459
In the Dictionary section of the gvariant-format-strings documentation
only how to construct a dictionary is shown.
Add a small example showing how to extract data from a nested dictionary
and specifically from a GVariant of type "(oa{sa{sv})". Move also the
Dictionary section after the GVariant * section for the sake of clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=786737
By default, only build man pages and gtk-doc if the build-deps were
found. To force-enable, pass -Dwith-docs=yes and -Dwith-man=yes.
Also use a foreach loop for man pages instead of listing them all
manually
We're in the process or rewriting other tools in Python to reduce the
number of dependencies of GLib.
Additionally, making glib-genmarshal a Python script reduces the
complexity when cross-compiling, as we don't need a native build to
generate the marshallers.
https://bugzilla.gnome.org/show_bug.cgi?id=784528
Very often when we want to convert a string to number, we assume that
the string contains only a number. We have g_ascii_strto* family of
functions to do the conversion but they are awkward to use - one has
to check if errno is zero, end_ptr is not NULL and *end_ptr points to
the terminating nul and then do the bounds checking. Many projects
need this kind of functionality, so it gets reimplemented all the
time.
This commit adds some replacement functions that convert a string to a
signed or unsigned number that also follows the usual way of error
reporting - returning FALSE on failure and filling an error output
parameter.
Partially based on telepathy-glib’s tp_g_ptr_array_contains(), and a
patch by Xavier Claessens <xavier.claessens@collabora.co.uk>.
Test cases included.
https://bugzilla.gnome.org/show_bug.cgi?id=698064
It's unnecessary, and only adds visual noise; we have been fairly
inconsistent in the past, but the semi-colon-less version clearly
dominates in the code base.
https://bugzilla.gnome.org/show_bug.cgi?id=669355
This is effectively the mc-wait-for-name tool from
telepathy-mission-control; moving it in to gdbus-tool will make it more
widely useful without making people depend on telepathy-mission-control
for no other reason. The code here is reimplemented from scratch to use
GDBus.
It blocks until the specified well-known name is owned by some process
on the bus (which can be the session, system, or any other bus). By
passing --activate, the same (or a different) name can be auto-started
on the bus first.
A timeout can be specified to ensure the process doesn’t block forever.
https://bugzilla.gnome.org/show_bug.cgi?id=745971
Add filesystem attribute to propagate time, when the metadata for the file
in "recent:///" was last changed. This attribute is needed for sorting
recent backend files in client applications.
https://bugzilla.gnome.org/show_bug.cgi?id=777507
Many UUID users will just need a random string, which can be generated
simply by calling the function g_uuid_string_random().
Based on original patch by
Marc-André Lureau <marcandre.lureau@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=639078
There have been some improvements to the tool recently, but it's hard to
know if those are available on a given system unless the tool provides a
--version commandline option.
https://bugzilla.gnome.org/show_bug.cgi?id=772269
Add --dependency-file=foo.d option to generate a gcc -M -MF style
dependency file for other build tools. The current output of
--generate-dependencies is only useful for use directly in Makefile
rules, but can't be used in other build systems like that.
The generated dependency file looks like this:
$ glib-compile-resources --sourcedir= test.gresource.xml --dependency-file=-
test.gresource.xml: test1.txt test2.txt test2.txt
test1.txt:
test2.txt:
test2.txt:
Unlike --generate-dependencies, the --dependency-file option can be
used together with other --generate options to create dependencies
as side-effect of generating sources.
Based on a patch by Tim-Philipp Müller in
https://bugzilla.gnome.org/show_bug.cgi?id=745754
The changes in this patch, compared to his are to always return
the hash table with file information from parse_resource_file, so
we can use it for dependency output, regardless if generate_dependencies
was TRUE or not.
Add --dependency-file=foo.d option to generate a gcc -M -MF style
dependency file for other build tools. The current output of
--generate-dependencies is only useful for use directly in Makefile
rules, but can't be used in other build systems like that.
The generated dependency file looks like this:
$ glib-compile-resources --sourcedir= test.gresource.xml --dependency-file=-
test.gresource.xml: test1.txt test2.txt test2.txt
test1.txt:
test2.txt:
test2.txt:
Unlike --generate-dependencies, the --dependency-file option can be
used together with other --generate options to create dependencies
as side-effect of generating sources.
Based on a patch by Tim-Philipp Müller.
https://bugzilla.gnome.org/show_bug.cgi?id=745754
The macro could be used at initialization time to avoid having an
unitialized builder, especially with g_auto variables.
The macro tries to be a bit more type-safe by making sure that the
variant_type parameter is actually "const GVariantType
*". Unfortunately I have no idea how to make it possible to also pass
a "const gchar *" parameter without warning.
https://bugzilla.gnome.org/show_bug.cgi?id=766370
In a vague attempt at ensuring the .stp scripts can be closely
associated with the .so files which they hard-code references to, rename
the scripts so they include the LT version — so that they are the .so
file name plus .stp.
This does not fix the fact that our .stp scripts will not work on
multiarch systems, as they are installed in an architecture-independent
directory (/usr/share/systemtap/tapset). At the moment, it is
recommended that any distribution who package the .stp files should
install them in the architecture-specific subdirectories of this (for
example, /usr/share/systemtap/tapset/x86-64).
A better long-term solution for this is under discussion upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=20264https://bugzilla.gnome.org/show_bug.cgi?id=662802
Add filesystem attribute to detect remote filesystems in order to
replace hardcoded filesystem types in GtkFileSystem. Set this attribute
also for GLocalFile appropriately.
Bump version to 2.49.3, so that early adopters of new API have a version
number to target.
Add a new API to allow clients to register a custom GFile implementation
handling a particular URI scheme.
This can be useful for tests, but also for cases where a different URI
scheme is desired to be used with another custom GFile backend.
As an additional cleanup, we can use this to register the "resource" URI
scheme too.
Based on a patch by Jasper St. Pierre <jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=767887
This makes it easier to use GKeyFile from language bindings, and makes
the API more consistent and modern with the new data type available in
GLib.
https://bugzilla.gnome.org/show_bug.cgi?id=767880
Nautilus wants to show entries in the sidebar only for removable devices.
It uses currently sort of conditions to determine which devices should be
shown. Those condition fails in some cases unfortunatelly. Lets provide
g_drive_is_removable() which uses udisks Removable property to determine
which devices should be shown. It should return true for all drives with
removable media, or flash media, or drives on usb and firewire buses.
https://bugzilla.gnome.org/show_bug.cgi?id=765900
This adds a new --c-generate-autocleanup option to gdbus-codegen
which can be used to instruct gdbus-codegen about what autocleanup
definitions to emit.
Doing this unconditionally was found to interfere with existing
code out in the wild.
The new option takes an argument that can be
none, objects or all; to indicate whether to generate no
autocleanup functions, only do it for object types, or do it
for interface types as well. The default is 'objects', which
matches the unconditional behavior of gdbus-codegen on the 2.48
branch.
https://bugzilla.gnome.org/show_bug.cgi?id=763379
Add a new GDtlsConnection interface, plus derived GDtlsClientConnection
and GDtlsServerConnection interfaces, for implementing Datagram TLS
support in glib-networking.
A GDtlsConnection is a GDatagramBased, so may be used as a normal
datagram socket, wrapping all datagrams from a base GDatagramBased in
DTLS segments.
Test cases are included in the implementation in glib-networking.
https://bugzilla.gnome.org/show_bug.cgi?id=752240
This example has been causing on-and-off build breaks for quite some
time. In this case, the code for copying the generated content into the
main docs of GIO is causing problems with srcdir != destdir builds (due
to the files also being copied from the read-only srcdir during
distchecks).
We could probably work around this problem yet again, but since there is
no real benefit to having this content included, so let's remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=734469
Currently the doc is incomplete when builddir!=srcdir
(e.g. debian package) because glibconfig.h is generared from
configure.ac and is thus missing from srcdir. This leads to
missing doc for symbols like G_GINT64_FORMAT.
https://bugzilla.gnome.org/show_bug.cgi?id=734469
Add some helpers for builds-checked unsigned integer arithmetic to GLib.
These will be based on compiler intrinsics where they are available,
falling back to standard manual checks otherwise.
The fallback case needs to be implemented as a function (which we do
inline) because we cannot rely on statement expressions. We also
implement the intrinsics case as an inline in order to avoid people
accidentally writing non-portable code which depends on static
evaluation of the builtin.
For now there is only support for addition and multiplication for guint,
guint64 and gsize. It may make sense to add support for subtraction or
for the signed equivalents of those types in the future if we find a use
for that.
https://bugzilla.gnome.org/show_bug.cgi?id=503096
Change it to a running example of a file viewer application with a file
class and various derived classes and related interfaces. Hopefully the
reader can relate to this a little better than to their maman.
https://bugzilla.gnome.org/show_bug.cgi?id=753935
Add string serialisation functions for GNetworkAddress, GSocketAddress,
GUnixSocketAddress, GInetSocketAddress, GNetworkService and
GSocketConnectable. These are intended for use in debug output, not for
serialisation in network or disc protocols.
They are implemented as a new virtual method on GSocketConnectable:
g_socket_connectable_to_string().
GInetSocketAddress and GUnixSocketAddress now implement
GSocketConnectable directly to implement to_string(). Previously they
implemented it via their abstract parent class, GSocketAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=737116
GDatagramBased is an interface abstracting datagram-based communications
in the style of the Berkeley sockets API. It may be contrasted to (for
example) GIOStream, which supports only streaming I/O.
GDatagramBased allows socket-like communications to be done through any
object, not just a concrete GSocket (which wraps socket()).
This adds the GDatagramBased interface, and implements it in GSocket.
https://bugzilla.gnome.org/show_bug.cgi?id=697907
Remove some outdated references to an old example, and add a row in the
table of steps in object initialization for the GObjectClass.constructed
virtual method.
https://bugzilla.gnome.org/show_bug.cgi?id=754855
Add support for receiving multiple messages with a single system call,
using recvmmsg() if available. Otherwise, fall back to looping over
g_socket_receive_message().
This adds new API, g_socket_receive_messages(), and corresponding unit
tests.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
This complements the GOutputMessage struct. It will shortly be used for
adding a g_socket_receive_messages() function, but needs to be committed
first to allow some internal refactoring of GSocket.
https://bugzilla.gnome.org/show_bug.cgi?id=751924
GListStore already has a g_list_store_insert_sorted function,
which can be used to keep the list sorted according to a fixed
sort function. But if the sort function changes (as e.g. with
sort columns in a list UI), the entire list needs to be
resorted. In that case, you want g_list_store_sort().
https://bugzilla.gnome.org/show_bug.cgi?id=754152
• Remove copies of function declarations from the explanation — if
people want those, they can follow links to the reference manual.
• Add markup to make C code more defined.
• Remove use of first person and irrelevant name dropping.
https://bugzilla.gnome.org/show_bug.cgi?id=744060
So that first-time users don’t fall into the trap of reading about the
gory memory layout details of GType and GObject when all they wanted to
do was derive a class.
https://bugzilla.gnome.org/show_bug.cgi?id=744060
Use G_DECLARE_INTERFACE and G_DEFINE_INTERFACE. Fix a couple of typos.
Add some comments to empty functions to make it obvious they’re
intentionally empty.
https://bugzilla.gnome.org/show_bug.cgi?id=744060
Restructure the section of the how-to which covers the header and source
code boilerplate for declaring and defining GObjects to use the new
G_DECLARE_*_TYPE macros. Present both final and derivable types.
Trim various supporting paragraphs.
Rename ‘class functions’ to ‘virtual functions’ to use consistent,
modern terminology.
https://bugzilla.gnome.org/show_bug.cgi?id=744060
This is meant for opaque, non-POSIX-like backends to indicate that the
URI is not persistent. Applications should look at
G_FILE_ATTRIBUTE_STANDARD_SYMLINK_TARGET for the persistent URI.
Examples of such backends could be a portal for letting sandboxed
applications access the file-system, or a database-backed storage like
Google Drive.
In these cases, the user visible file and folder names are different
from the real identifiers, used by the backend. So, a request to
create google-drive://user@gmail.com/foo/New\ File, would actually
lead to google-drive://user@gmail.com/foo/bar on the server even though
the user visible name is still "New File". Since the server-defined URI
is persistent and sanity-checked by the backend, it is recommended that
applications switch to it as soon as possible. Backends will try to
keep a mapping from "fake" to "real" URIs, but those are only on a
best effort basis. They might not be persistent or have the same
guarantees as the "real" URIs.
https://bugzilla.gnome.org/show_bug.cgi?id=741602
Make it a little easier to find the GType conventions page, which I
guess should be the canonical guide to how to name things.
This adds a brief mention of the valid characters in a type name to the
conventions page.
https://bugzilla.gnome.org/show_bug.cgi?id=743018
This is a binding-friendly version of g_dbus_connection_register_object.
Based on a patch by Martin Pitt and the code of g_bus_watch_name_with_closures.
https://bugzilla.gnome.org/show_bug.cgi?id=656325
Add a property to GNetworkMonitor indicating if the network
is metered, e.g. subject to limitations set by service providers.
The default value is FALSE
https://bugzilla.gnome.org/show_bug.cgi?id=750282
Instead of just dropping address types that we're not specifically
handling we return a GNativeSocketAddress which is just a dummy
container for the stuct sockaddr.
https://bugzilla.gnome.org/show_bug.cgi?id=750203
This allows the caller to know when a socket has been bound so that
it can for instance set the SO_SENDBUF and SO_RECVBUF socket options
before listen is called
https://bugzilla.gnome.org/show_bug.cgi?id=738207
Fix a few typical problems, and also stop wrapping the inline definition
of g_steal_pointer in parens, since it is not necessary and it confuses
gtk-doc.
This can be used to query whether the task has completed, in the sense
that it has had a result set on it, and has already – or will soon –
invoke its callback function.
Notifications for this property are emitted immediately after the task’s
main callback, in the same main context as that callback. This allows
for multiple bits of code to listen for completion of the GTask, which
opens the door for blocking on cancellation of the GTask and improved
handling of ‘pending’ behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=743636
This is a singleton, but we have a function called _new() to get it.
What's worse is that the documentation makes no mention of this, and
actually specifically says that a new monitor will be created each time.
https://bugzilla.gnome.org/show_bug.cgi?id=742599
This is *significantly* more pleasant to use from C (while handling
errors and memory cleanup).
While we're here, change some ugly, leaky code in
tests/desktop-app-info.c to use it, in addition to a test case
in tests/file.c.
https://bugzilla.gnome.org/show_bug.cgi?id=661554
g_application_bind_busy_property() had the restriction that only one
property can be bound per object, so that NULL could be used to unbind.
Even though this is enough for most uses, it is a weird API.
Lift that restriction and add an explicit unbind function.
https://bugzilla.gnome.org/show_bug.cgi?id=744565
Balancing g_application_{un,}mark_busy() is non-trivial in some cases.
Make it a bit more convenient by allowing to bind multiple boolean
properties (from different objects) to the busy state. As long as these
properties are true, the application is marked as busy.
https://bugzilla.gnome.org/show_bug.cgi?id=744565
This is made by doing a build with --rebuild-types option,
then manually remove those functions:
g_win32_input_stream_get_type
g_win32_output_stream_get_type
g_io_extension_get_type
Maybe Makefile.am could remove them automatically so we can
remove gio.types from git and rely on --rebuild-types option?
Add g_list_store_insert_sorted() which takes a GCompareDataFunc to
decide where to insert. This ends up being a very trivial function,
thanks to GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=743927
Add g_auto() and g_autoptr() as helpers for declaring variables with
automatic cleanup.
Add some macros to help types define cleanup functions for themselves.
Going forward it will be an expectation that people use this macro when
creating a new type, even if they do not intend to use the auto-cleanup
functionality for themselves.
These new macros only work on GCC and clang, which is why we resisted
adding them for so long. There exist many people who are only
interested in writing programs for these compilers, however, and a
similar API in libgsystem has proven to be extremely popular, so let's
expose this functionality to an even wider audience.
We ignore deprecation warnings when emitting the free functions, which
seems suspicious. The reason that we do this is not because we want to
call deprecated functions, but just the opposite: sometimes the free
function will be an _unref() function that is only AVAILABLE_IN newer
versions, and these warnings are also implemented as deprecation
warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=743640
GListModel is an interface that represents a dynamic list of GObjects.
Also add GListStore, a simple implementation of GListModel that stores
all objects in memory, using a GSequence.
https://bugzilla.gnome.org/show_bug.cgi?id=729351
Add G_DECLARE_DERIVABLE_TYPE() and G_DECLARE_FINAL_TYPE() to allow
skipping almost all of the typical GObject boilerplate code.
These macros make some assumptions about GObject best practice that mean
that they may not be usable with older classes that have to preserve
API/ABI compatibility with a time before these practices existed.
https://bugzilla.gnome.org/show_bug.cgi?id=389585
Currently the only way to set a state hint on an action is through a
subclass; add a g_simple_action_set_state_hint() method so that this
becomes easier for clients that already use GSimpleAction.
https://bugzilla.gnome.org/show_bug.cgi?id=743521
Along the same lines as g_clear_object(), g_set_object() is a
convenience function to update a GObject pointer, handling reference
counting transparently and correctly.
Specifically, it handles the case where a pointer is set to its current
value. If handled naïvely, that could result in the object instance
being finalised. In the following code, that happens when
(my_obj == new_value) and the object has a single reference:
g_clear_object (&my_obj);
my_obj = g_object_ref (new_value);
It also simplifies boilerplate code such as set_property()
implementations, which are otherwise long and boring.
Test cases included.
https://bugzilla.gnome.org/show_bug.cgi?id=741589
This is a convenience method for creating a GNetworkAddress which is
guaranteed to return IPv4 and IPv6 loopback addresses. The program
cannot guarantee that 'localhost' will resolve to both types of
address, so programs which wish to connect to a local service over
either IPv4 or IPv6 must currently manually create an IPv4 and another
IPv6 socket, and detect which of the two are working. This new API
allows the existing GSocketConnectable machinery to be used to
automate that.
Based on a patch from Philip Withnall.
https://bugzilla.gnome.org/show_bug.cgi?id=732317
This function adds a single main option entry to be handeled by
GApplication. The option entry has it arg_data field set to NULL
and will be added to the applications packed_options.
The rationale for this is that bindings will be able to add
command line options even when they can't use the un-boxed struct
GOptionEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=727455
We don't use this for anything inside of GApplication yet, but Gtk is
about to start using it to find various bits of the application (such as
its menus, icons, etc.).
By default, we form the base path from the application ID to end up with
the familiar /org/example/app style.
https://bugzilla.gnome.org/show_bug.cgi?id=722092
Used for the commonly used case (in signal emission) where we
initialize and set a GValue for an instance
Includes a fast-path for GObject
Overall makes it 6 times faster than the previous combination
of g_value_init + g_value_set_instance
Makes signal emission around 10% faster
https://bugzilla.gnome.org/show_bug.cgi?id=731950
- GSubprocessLauncher exists since 2.40, not 2.36
- more logical order for g_markup functions
- fix short description of GMarkup
- GMarkupParser: specify that some parameters are NULL-terminated.
- g_string_new (NULL); is possible.
- other trivial fixes.
https://bugzilla.gnome.org/show_bug.cgi?id=728983
On initialisation, GObject guarantees to zero-fill
class/object/interface structures. Document this so people don’t spend
forever writing:
my_object->priv->some_member = NULL;
my_object->priv->some_other_member = NULL;
https://bugzilla.gnome.org/show_bug.cgi?id=729167
Add a new function, g_str_to_ascii() that does locale-dependent ASCII
transliteration of UTF-8 strings.
This function works off of an internal database. We get the data out of
the localedata shipped with glibc, which seems to be just about the best
source of locale-sensitive transliteration information available
anywhere.
We include a update script with this commit that's not used by anything
at all -- it will just sit in git. It is intended to be run manually
from time to time.
https://bugzilla.gnome.org/show_bug.cgi?id=710142
In addition to the standard "192.168.1.1" format, there are numerous
legacy IPv4 address formats (such as "192.168.257",
"0xc0.0xa8.0x01.0x01", "0300.0250.0001.0001", "3232235777", and
"0xc0a80101"). However, none of these forms are ever used any more
except in phishing attempts. GLib wasn't supposed to be accepting
these addresses (neither g_hostname_is_ip_address() nor
g_inet_address_new_from_string() recognizes them), but getaddrinfo()
accepts them, and so the parts of gio that use getaddrinfo()
accidentally did accept those formats.
Fix GNetworkAddress and GResolver to reject these address formats.
https://bugzilla.gnome.org/show_bug.cgi?id=679957
Since all element markup is now gone from the doc comments,
we can turn off the gtk-doc sgml mode, which means that from
now on, docbook markup is no longer allowed in doc comments.
To make this possible, we have to replace all remaining
entities in doc comments by their replacement text, & -> &
and so on.
Add support for parsing command line options with GApplication.
You can add GOptionGroup and GOptionEntry using two new APIs:
g_application_add_option_group() and
g_application_add_main_option_entries().
Also add a "handle-local-options" signal that allows handling of
commandline arguments in the local process without having to override
local_command_line.
As a special feature, you can have a %NULL @arg_data in a GOptionEntry
which will cause the argument to be stored in a GVariantDict. This
dictionary is available for inspection and modification by the
"handle-local-options" signal and can be forwarded to the primary
instance in cases of command line invocation (where it can be fetched
using g_application_command_line_get_options()).
https://bugzilla.gnome.org/show_bug.cgi?id=721977
Slightly expand on the documentation about casting varargs when
constructing GVariants, and link to it from all the functions where it’s
a necessary consideration.
Add an example of passing flags to a ‘t’ type variable (guint64).
Assuming the flags enum does not have many members, the flag variable
will be 32 bits wide, and needs an explicit cast to be passed into
g_variant_new() as a 64-bit value.
https://bugzilla.gnome.org/show_bug.cgi?id=712837
This returns the command line in GLib filename encoding format (ie:
UTF-8) for use with g_option_context_parse_strv().
This will allow parsing of Unicode commandline arguments on Windows,
even if the characters in those arguments fall outside of the range of
the system codepage.
https://bugzilla.gnome.org/show_bug.cgi?id=722025
Add g_option_context_parse_strv() that obeys the normal memory conventions for
dealing with a strv instead of assuming that we're dealing with the 'argv'
parameter to main().
This will help for using GOptionContext with GApplication.
https://bugzilla.gnome.org/show_bug.cgi?id=721947
This was a feature intended from the very beginning that somehow never
got written. It's a way to replace these sort of error messages out of
the GVariant parser:
1-2,10-15:unable to find a common type
with something in the style of the Vala compiler:
unable to find a common type:
[1, 2, 3, 'str']
^ ^^^^^
https://bugzilla.gnome.org/show_bug.cgi?id=715028
Most GErrors, such as GSomethingError, have a function to get
their quark that looks like g_something_error_quark(),
so bindings (such as gtkmm) would expect GVariantParseError
to have g_variant_parse_error_quark(). Instead this had
g_variant_parser_get_error_quark().
This deprecates the old function and adds the correct one,
making life easier for gtkmm (and maybe others).
https://bugzilla.gnome.org/show_bug.cgi?id=708212
This is really just a very crude and limited conditional breakpoint.
Update the documentation to explain conditional breakpoints in
gdb instead. Also, remove the link to refdbg, which appears dead.
https://bugzilla.gnome.org/show_bug.cgi?id=719687
g_test_set_nonfatal_assertions() was a no-op, because
g_assertion_message() wasn't actually checking the
test_nonfatal_assertions flag. Fix that and add a test.
Also, g_test_set_nonfatal_assertions() has to set test_mode_fatal to
FALSE as well, or else a failed assertion will cause the test program
to abort at the end of the failed test.
Also, belatedly add this and the new g_assert_* methods to the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=711800
Since the initial addition of BeOS support in 1999, there has only
been one update to it (in 2005, and it wasn't even very big). GLib is
known to not currently build on Haiku (or presumably actual BeOS)
without additional patching, and the fact that there isn't a single
G_OS_BEOS check in gio/ is suspicious.
Additionally, other than the GModule implementation, all of the
existing G_OS_BEOS checks are either (a) "G_OS_UNIX || G_OS_BEOS", or
(b) random minor POSIXy tweaks (include this header file rather than
that one, etc), suggesting that if we were going to support Haiku, it
would probably be simpler to treat it as a special kind of G_OS_UNIX
(as we do with Mac OS X) rather than as its own completely different
thing.
So, kill G_OS_BEOS.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Add g_settings_schema_has_key() and _get_range(), _range_check(),
_get_value_type(), _get_default_value() methods on GSettingsSchemaKey.
Deprecate the equivalent APIs on GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683017
Add two new APIs: g_settings_get_user_value() and
g_settings_get_default_value(). Together, these should allow the
inspection of all interesting cases of "is this key set?" and "what
would happen if I reset this key?"
https://bugzilla.gnome.org/show_bug.cgi?id=668233
g_settings_list_schemas() and g_settings_list_relocatable_schemas() are
now deprecated.
This will allow listing off schemas on non-default sources and is a
better fit with the new direction the API is going.
https://bugzilla.gnome.org/show_bug.cgi?id=680838
Add an API to read the summary and description from the .xml schema
files.
This will be used by dconf-editor and gnome-tweak-tool.
This API is a bit heavy -- it parses the XML and builds a table. It
also loads gettext domains for translation. It only does these things
if it is used, however, so it will not impact normal applications.
We store the summary/description in a pair of hash tables on the schema
source (which we have a backref to as of a few commits ago). We can't
use a global table because people might want to request summary and
description from non-default sources. We don't want to use per-schema
tables because we'd have to reparse the directory every time (since we
cannot guess which file a schema may have been in).
https://bugzilla.gnome.org/show_bug.cgi?id=668232
Take this private API and make it public along with a boxed type and
ref/unref functions.
Future commits will add accessors with new functionality and some that
allow us to deprecate functions on GSettings itself (such as
g_settings_get_range).
https://bugzilla.gnome.org/show_bug.cgi?id=668232
This indicates whether the thumbnail (given by G_FILE_ATTRIBUTE_THUMBNAIL_PATH)
is valid — i.e. to represent the file in its current state. If
G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID is FALSE (for a normal _or_ failed
thumbnail) it means the file has changed since the thumbnail was generated, and
the thumbnail is out of date.
Part of checking thumbnail validity (by the spec) involves parsing
headers out of the thumbnail .png so we include some (small) code to do
that in a separate file. We will likely want to copy this code to gvfs
to do the same for GVfsFile.
Heavily based on a patch from Philip Withnall <philip.withnall@collabora.co.uk>
who suggested the feature and designed the API.
https://bugzilla.gnome.org/show_bug.cgi?id=709898
There are a number of nice things this class brings:
0) Has a race-free termination API on all platforms (on UNIX, calls to
kill() and waitpid() are coordinated as not to cause problems).
1) Operates in terms of G{Input,Output}Stream, not file descriptors
2) Standard GIO-style async API for wait() with cancellation
3) Makes some simple cases easy, like synchronously spawning a
process with an argument list
4) Makes hard cases possible, like asynchronously running a process
with stdout/stderr merged, output directly to a file path
Much rewriting and code review from Ryan Lortie <desrt@desrt.ca>
https://bugzilla.gnome.org/show_bug.cgi?id=672102
This is essentially a commandline implementation of the client-side of
the org.freedesktop.Application D-Bus interface.
It includes support for tab-completion based on desktop files and their
contents.
https://bugzilla.gnome.org/show_bug.cgi?id=704218
Add a pair of functions to make it easier to do simple string matching.
This will be useful for use with things like GtkSearchBar and will also
be the basis of the searching done by the (soon to appear)
g_desktop_app_info_search()
https://bugzilla.gnome.org/show_bug.cgi?id=709753
A counterpart for parsing of detailed actions into (name, target) pairs,
this new function prints them back.
We also add a new function to check for validity of action names. Only
valid action names are allowed when printing. Parsing accepts _some_
invalid names for backwards compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=704157
For some time, the desktop file specification has supported "additional
application actions". This is intended to allow for additional methods
of starting an app, such as a mail client having a "Compose New Message"
action that brings up the compose window instead of the folder list.
This patch adds support for this with a relatively minimal API.
In the case that the application is a GApplication and DBusActivatable,
desktop actions are translated into GActions that have been added to the
application with g_action_map_add_action(). This more or less closes
the loop on being able to activate an application with an action
invocation (instead of 'activate').
https://bugzilla.gnome.org/show_bug.cgi?id=664444
Add a new type of GAction that represents the value of a property on an
object. As an example, this might be used on the "visible-child-name"
property of a GtkStack.
https://bugzilla.gnome.org/show_bug.cgi?id=703270
As it turns out, we have examples of internal functions called
type_name_get_private() in the wild (especially among older libraries),
so we need to use a name for the per-instance private data getter
function that hopefully won't conflict with anything.
Started off by using the new instance private data macro, ended up
cleaning up the obscure, out of date, or simply broken concepts and
paragraphs.
https://bugzilla.gnome.org/show_bug.cgi?id=700035
Mark 'test', 'test-report', 'perf-report' and 'full-report' as PHONY in
docs/Makefile.am to prevent recursion of gtester into the documentation
subdirectories. Stop including Makefile.decl from these directories
since it is no longer necessary.
This will clear up the warnings about EXTRA_DIST being defined once in
gtk-doc.make and again in Makefile.decl.
Add a pair of functions for returning strings that don't need to be
freed. This is a bit of a hack but it will turn the 99% case of using
these functions from:
gchar *tmp;
tmp = g_test_build_filename (...);
fd = open (tmp, ...);
g_free (tmp);
to:
fd = open (g_test_get_filename (...), ...);
which is a pretty substantial win.
https://bugzilla.gnome.org/show_bug.cgi?id=549783
g_test_trap_fork() doesn't work on Windows and is potentially flaky on
unix anyway given the fork-but-don't-exec. Replace it with
g_test_trap_subprocess(), which re-spawns the same program with
arguments telling it to run a specific (otherwise-ignored) test case.
Make the existing g_test_trap_fork() unit tests be unix-only (they
never passed on Windows anyway), and add a parallel set of
g_test_trap_subprocess() tests.
Also fix the logic of gtestutils's "-p" argument (which is used by the
subprocess tests); previously if you had tests "/foo/bar" and
"/foo/bar/baz", and ran the test program with "-p /foo/bar/baz", it
would run "/foo/bar" too. Fix that and add tests.
https://bugzilla.gnome.org/show_bug.cgi?id=679683
Higher order languages with garbage collection can have issues releasing
a binding, as they do not control the last reference being dropped on
the binding, source, or target instances.
https://bugzilla.gnome.org/show_bug.cgi?id=698018
The way of getting the default value out of a GParamSpec is to allocate
a GValue, initialise it, then call g_param_spec_set_default() to set the
default value into that GValue.
This is exactly how we handle setting the default value for all of the
construct properties that were not explicitly passed to g_object_new().
Instead of doing the alloc/init/store on all construct properties on
every call to g_object_new(), we can cache those GValues in the private
data of the GParamSpec itself and reuse them.
This patch does not actually make that change to g_object_new() yet, but
it adds the API to GParamSpec so that a future patch to GObject can make
the change.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
Since instance private data is now always at a constant offset to the
instance pointer, we can add an accessor for it that doesn't also
require an instance.
The idea is that classes can call this from their class_init and store
it in a file-scoped static variable and use that to find their private
data on instances very quickly, without a priv pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
This function takes a GIcon, serialises it and sets the resulting
GVariant as the "icon" attribute on the menu item. We will need to add
a patch to Gtk to actually consume this icon.
Also add G_MENU_ATTRIBUTE_ICON.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
GBytesIcon is an icon that has a GBytes inside of it where the GBytes
contains some sort of encoded image in a widely-recognised file format.
Ideally this will be a PNG.
It implements GLoadableIcon, so GTK will already understand how to use
it, but we will add another patch there to make things more efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=688820
Lots of people have variously asked for APIs like
g_variant_new_string_printf() in order to avoid having to use
g_strdup_printf(), create a GVariant using g_variant_new_string(), then
free the temporary string.
Instead of supporting that, plus a million other potential cases,
introduce g_variant_new_take_string() as a compromise.
It's not possible to write:
v = g_variant_new_take_string (g_strdup_printf (....));
to get the desired result and avoid the extra copies. In addition, it
works with many other functions.
https://bugzilla.gnome.org/show_bug.cgi?id=698455
This feature is intended for clients that want to signal a desktop shell
their busy state, for instance because a long-running operation is
pending.
The API works in a similar way to g_application_hold and
g_application_release: applications can call g_application_mark_busy()
to increase a counter that will keep the application marked as busy
until the counter reaches zero again.
The busy state is exported read-only on the org.gtk.Application interface
for clients to use.
https://bugzilla.gnome.org/show_bug.cgi?id=672018
Expand and formalise the syntax for detailed action names, adding a
well-documented (and tested) public parser API for them.
Port the only GLib-based user of detailed action names to the new API:
g_menu_item_set_detailed_action(). The users in Gtk+ will also be
ported soon.
https://bugzilla.gnome.org/show_bug.cgi?id=688954
Add GSimpleProxyResolver, for letting people do static proxy
resolution, and to use as a base class for other resolvers (such as
GProxyResolverGnome).
https://bugzilla.gnome.org/show_bug.cgi?id=691105
Add a proxy-resolver property to GSocketClient, to allow overriding
proxy resolution in situations where you need to force a particular
proxy rather than using the system defaults.
https://bugzilla.gnome.org/show_bug.cgi?id=691105
There are two benefits to this:
1) We can centralize any operating system specific knowledge of
close-vs-EINTR handling. For example, while on Linux we should never
retry, if someone cared enough later about HP-UX, they could come by
and change this one spot.
2) For places that do care about the return value and want to provide
the caller with a GError, this function makes it convenient to do so.
Note that gspawn.c had an incorrect EINTR loop-retry around close().
https://bugzilla.gnome.org/show_bug.cgi?id=682819
Adding file descriptors to a GSource provides similar functionality to
the old g_source_add_poll() API with two main differences.
First: the list of handles is managed internally and therefore users are
prevented from randomly modifying the ->events field. This prepares us
for an epoll future where changing the event mask is a syscall.
Second: keeping the list internally allows us to check the ->revents for
events for ourselves, allowing the source to skip implementing
check/prepare. This also prepares us for the future by allowing an
implementation that doesn't need to iterate over all of the sources
every time.
https://bugzilla.gnome.org/show_bug.cgi?id=686853
g_test_trap_fork() doesn't work on Windows and is potentially flaky on
unix anyway given the fork-but-don't-exec. Replace it with
g_test_trap_subprocess(), which re-spawns the same program with
arguments telling it to run a specific (otherwise-ignored) test case.
Make the existing g_test_trap_fork() unit tests be unix-only (they
never passed on Windows anyway), and add a parallel set of
g_test_trap_subprocess() tests.
https://bugzilla.gnome.org/show_bug.cgi?id=679683
This is a new convenience method designed to simplify some use
cases of GFileEnumerator, by making it easy to get the next file
from a file enumerator.
https://bugzilla.gnome.org/show_bug.cgi?id=690083
Add g_socket_get_option() and g_socket_set_option(), wrapping
getsockopt/setsockopt for the case of integer-valued options. Update
code to use these instead of the underlying calls.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
Install a public "gnetworking.h" header that can be used to include
the relevant OS-dependent networking headers. This does not really
abstract away unix-vs-windows however; error codes, in particular,
are incompatible.
gnetworkingprivate.h now contains just a few internal URI-related
functions
Also add a g_networking_init() function to gnetworking.h, which can be
used to explicitly initialize OS-level networking, rather than having
that happen as a side-effect of registering GInetAddress.
https://bugzilla.gnome.org/show_bug.cgi?id=623187
This lets you cache type lookup information and then know when
the cache information is out of date. In particular, we want this
in order to be able to cache g_type_from_name() lookups in the Gtk+
theme machinery.
https://bugzilla.gnome.org/show_bug.cgi?id=689847
When running a test program (ie, if g_test_init() has been called),
don't pop up a dialog box when a fatal error occurs. Just print the
message to stderr and exit.
https://bugzilla.gnome.org/show_bug.cgi?id=679683
Really, the memory output stream API is too warped around the model
where it's a fixed size buffer that you've already allocated. Even in
C, I find myself always wanting to use it to just accumulate data into
an arbitrary-sized buffer it allocates.
Unfortunately, it's also not usable from bindings because it's not
common to bind g_free() and g_realloc(), but if you just pass NULL, you
get the default of a fixed size, which is useless as per above.
I am going to use this from a gjs test case, and the GSubprocess test
cases also will use it.
https://bugzilla.gnome.org/show_bug.cgi?id=688931
Add a pair of new APIs: one to GFile to create a new file from a
commandline arg relative to a given cwd and one to
GApplicationCommandLine to create a GFile from an arg, relative to the
cwd of the invoking commandline.
https://bugzilla.gnome.org/show_bug.cgi?id=689037
The previous fix didn't work, because every place within glib that
used any of the functions also needed to be including win32compat.h.
So, move the prototypes back to their original headers (but at least
all in one place at the bottom).
https://bugzilla.gnome.org/show_bug.cgi?id=688109
To avoid -Wmissing-prototype warnings, we need to prototype both the
original and the _utf8 versions of all of the functions that have had
_utf8-renaming on Windows. But duplicating all the prototypes is ugly,
so rather than doing them "in-place", move them all to a new header
file just for that.
https://bugzilla.gnome.org/show_bug.cgi?id=688109
Move the guts of g_type_init() into a ctor and turn g_type_init() itself
into a do-nothing function.
g_type_init_with_debug_flags() now ignores its arguments, but it has
always been possible to achieve the same effect via environment
variables.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
Reimplement gioscheduler in terms of GTask, and deprecate the original
gioscheduler methods. Update docs to point people to GTask rather than
gioscheduler and GSimpleAsyncResult, but don't actually formally
deprecate GSimpleAsyncResult yet.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
GTask is a replacement for GSimpleAsyncResult and GIOScheduler, that
also allows for making cancellable wrappers around non-cancellable
functions (as in GThreadedResolver).
https://bugzilla.gnome.org/show_bug.cgi?id=661767
This is the expected (and sane) behavior - without this bug-fix you'd
have to add "Since" to every member of a newly added D-Bus interface.
Also show-case this in the codegen example.
Signed-off-by: David Zeuthen <zeuthen@gmail.com>
For some time now people have been asking for a way to check for type
compatibility between GVariant instances and format strings. There are
several APIs inside of GLib itself that would benefit from this.
This patch introduces a way to do that.
Add a variant of g_markup_collect_attributes() which will
ignore unknown attributes (such as those from different XML
namespaces) when parsing markup, rather than returning
G_MARKUP_ERROR_UNKNOWN_ATTRIBUTE as g_markup_collect_attributes()
does.
Patch by Philip Withnall,
https://bugzilla.gnome.org/show_bug.cgi?id=665634
I don't see a good reason for this - if man page generation is
disabled, man pages are not produced, and things like 'make dist'
will fail. That is simpler and better.
https://bugzilla.gnome.org/show_bug.cgi?id=681336
Previously, --enable-man --disable-gtk-doc would silently skip
man page generation, because we didn't even desdend into docs/reference.
Fix this by always going there.
https://bugzilla.gnome.org/show_bug.cgi?id=681336
Because of the '--as-needed' default option
for the linker, the linking will fail, if the
file name appears after any of the options or
the pkg-config invocation.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=681854
Use $(AM_V_GEN) for generating man pages, and set some parameters
for the XSL stylesheets. Among other things, don't generate AUTHORS
and COPYRIGHT sections.
This looks like it was stubbed out but not implemented; the vtable
entry dates to commit 3781343738 which
is just alex's initial merge of gio into glib.
I was working on some code that wants an asynchronous rm -rf
equivalent, and so yeah, this is desirable.
https://bugzilla.gnome.org/show_bug.cgi?id=680760
Many (if not "almost all") programs that spawn other programs via
g_spawn_sync() or the like simply want to check whether or not the
child exited successfully, but doing so requires use of
platform-specific functionality and there's actually a fair amount of
boilerplate involved.
This new API will help drain a *lot* of mostly duplicated code in
GNOME, from gnome-session to gdm. And we can see that some bits even
inside GLib were doing it wrong; for example checking the exit status
on Unix, but ignoring it on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679691
Rather than doing a two step first-check-the-GAsyncResult-subtype-then-
check-the-tag, add a GAsyncResult-level method so that you can do them
both at once, simplifying the code for "short-circuit" async return
values where the vmethod never gets called.
https://bugzilla.gnome.org/show_bug.cgi?id=661767
Finish deprecating the "handle GSimpleAsyncResult errors in the
wrapper function" idiom (and protect against future GSimpleAsyncResult
deprecation warnings) by adding a "legacy" GAsyncResult method
to do it in those classes/methods where it had been traditionally
done.
(This applies only to wrapper methods; in cases where an _async
vmethod explicitly uses GSimpleAsyncResult, its corresponding _finish
vmethod still uses g_simple_async_result_propagate_error.)
https://bugzilla.gnome.org/show_bug.cgi?id=667375https://bugzilla.gnome.org/show_bug.cgi?id=661767
* Document how to override interfaces already implemented
in a base class, and also call those base class implementations
from a derived reimplementation.
* Don't recomend people use base_init() style functions to
initialize interface signals and properties, use default_init()
aka class_init() instead (as G_DEFINE_INTERFACE() uses).
* The above solves the interface init called multiple times
problem, so remove some needless naysaying about that.
* Document default_init() in the interface initialization discussion
* Linkify more stuff.
* Remove some crud and typos
https://bugzilla.gnome.org/show_bug.cgi?id=675504
The docs for GString should really mention GByteArray, and what makes
it different. Drop the comparison to Java which is dated and actually
inaccurate (because StringBuffer operates on Unicode).
While we're here, add g_string_free_to_bytes(), which further
complements the spread of GBytes-based API. For example, one can
create a buffer using GString, then send it off via
g_output_stream_write_bytes().
https://bugzilla.gnome.org/show_bug.cgi?id=677064
They make a full (deep) copy of a list.
In contrast with g_[s]list_copy(), these functions take a function as a argument
to make a copy of each list element, in addition to copying the list container itself.
The functions g_[s]list_copy() were reimplemented to just call the new functions
with NULL as the function argument, which will behave like current implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=675024
Using a caller-supplied buffer for g_input_stream_read() doesn't
translate well to the semantics of many other languages, and using a
non-refcounted buffer for read_async() and write_async() makes it
impossible to manage the memory correctly currently in
garbage-collected languages.
Fix both of these issues by adding a new set of methods that work with
GBytes objects rather than plain buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=671139
This essentially adds an accessor for the MimeType field in desktop files,
to retrieve the list of all mime types supported by an application.
The interface though is part of GAppInfo, so it could be implemented
in the future by other backends.
https://bugzilla.gnome.org/show_bug.cgi?id=674111
Provide public access to the GDBusConnect and object path that
GApplication is using. Prevents others from having to guess these
things for themselves based on the application ID.
https://bugzilla.gnome.org/show_bug.cgi?id=671249
Add two new methods to GProxyAddress for recovering information about
the destination URI that the proxy was created for (and modify
GProxyAddressEnumerator to set that information when creating the
GProxyAddress).
