2005-12-20 Matthias Clasen <mclasen@redhat.com>
* glib/glib.symbols:
* glib/gthreadpool.h:
* glib/gthreadpool.c (g_thread_pool_set_sort_function): New function
to sort tasks pushed into a threadpool. (#324479, Martyn Russell)
* tests/threadpool-test.c: Test this.
Tue Dec 20 18:14:14 2005 Tim Janik <timj@imendio.com>
* glib/gslice.[hc]: added mem_error() and mem_assert() to test and
handle errors without depending on gmessage.c which might not be
setup when the error occours.
removed G_SLICE_CONFIG_ALWAYS_FREE config option, fixed the code so
always freeing can be achieved by adjusting the working set time to
0 with G_SLICE_CONFIG_WORKING_SET_MSECS.
added G_SLICE_CONFIG_COLOR_INCREMENT to test different color increments
(mainly 0 and 1). reduced the minimum block size to 128 bytes, to
minimize wastage if small amounts of differently sized structrues are
allocated, this does come at a performance cost of roughly 5% though.
fixed up block alignment calculation, so it works for varying
block sizes. only use strerror() not g_strerror() since the latter
depends on working GQuark and GSlice.
mem_error(): implemented in terms of fprintf and vfprintf.
* tests/slice-color.c: new program to test cache colorization effects.
* tests/slice-test.c: trade G_SLICE_CONFIG_ALWAYS_FREE for 0 duration
G_SLICE_CONFIG_WORKING_SET_MSECS.
* glib/gasyncqueue.c:
- Call g_queue_insert_sorted() instead of duplicating the code.
- Call g_queue_sort() instead of duplicating the code.
- Invert sort function results to make sure the same sort function
gives the same results across glist, gslist, gqueue and
gasyncqueue.
* tests/asyncqueue-test.c:
- Updated the sort function to reflect the example in the
documentation for gasyncqueue.c.
2005-12-05 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am (TESTS_ENVIRONMENT):
* tests/gobject/Makefile.am (TESTS_ENVIRONMENT): Set
MALLOC_CHECK_ and MALLOC_PERTURB_
* tests/run-collate-tests.sh: Run the collation tests explicitly
in en_US locale. (#320463)
* docs/reference/glib/glib-sections.txt:
* glib/gasyncqueue.[ch]:
- Added support for sorting async queues by with _push_sorted(),
_push_sorted_unlocked(), _sort() and _sort_unlocked() (#323047).
* tests/Makefile.am:
* tests/asyncqueue-test.c:
- Added test case for gasyncqueue.c
2005-12-05 Matthias Clasen <mclasen@redhat.com>
* tests/libmoduletestplugin_a.c: Fix compiler warnings.
* glib/gatomic.c: In the ia64 implementation, use
__sync builtin without _si or _di suffix. (#321229,
Stanislav Brabec, patch by Andreas Schwab)
Fri Dec 2 10:55:07 2005 Tim Janik <timj@imendio.com>
* tests/slice-test.c: extended to perform the benchmarking on the old
memchunk code if 'O' is selected.
* tests/memchunks.c: new file which contains the old GLib mem chunks
implementation with prefix old_mem_chunk_.
* tests/Makefile.am: added memchunks.c
Thu Dec 1 17:32:46 2005 Tim Janik <timj@imendio.com>
* glib/gslice.[hc]: new slice allocator implementation.
* tests/slice-test.c: added random slice allocation test.
* glib/gthread.[hc]: removed newly added private thread mem API.
* glib/gthreadinit.h:
* glib/gmessages.c:
* glib/gthread.c:
* glib/gmem.c: divided glib threading initialisation into three phases,
initialisation where private keys and messaging are not available (only
needed by gmem.c), initialisation without messaging but private keys
available (gslice.c, gmessage.c), and full fledged initialisers that
server the rest of glib. initialisation functions got renamed to reflect
the limitations of their corresponding phases.
* glib/gmem.c: removed memchunk code, defer allocations to
g_slice_* instead.
* glib/gmem.[hc]: removed g_slice_* skeletons.
* glib/glib.symbols: added g_slice_* symbols.
* configure.in: check for availability of posix_memalign(3), memalign(3)
and valloc(3).
* glib/Makefile.am: added gslice.[hc].
2005-11-17 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am:
* tests/utf8-pointer.c: Unit tests for g_utf8_pointer_to_offset
and g_utf8_offset_to_pointer.
* glib/gutf8.c (g_utf8_pointer_to_offset)
(g_utf8_offset_to_pointer): Handle negative offsets, and use
"stutter stepping" for going backwards. (#320638, Larry
Ewing)
2005-10-29 Matthias Clasen <mclasen@redhat.com>
* tests/convert-test.c: Add some tests for conversions between
UTF-8, UCS-4 and UTF-16.
* glib/gutf8.c (g_utf8_to_ucs4, g_utf8_to_utf16): Fix handling
of len == -1, noticed by Morten Welinder.
2005-10-05 Matthias Clasen <mclasen@redhat.com>
* Makefile.am: Add Collation tests.
* tests/collate/*: Inputs and expected outputs for collation tests.
* tests/run-collate-tests.sh: Script to run collation tests.
* tests/unicode-collate.c (main): Rework slightly to make
it usable in unit tests. Also test g_utf8_collate_key_for_filename().
2005-10-01 Behdad Esfahbod <behdad@gnome.org>
* docs/reference/glib/tmpl/unicode.sgml:
* glib/gen-unicode-tables.pl:
* glib/gunibreak.h:
* glib/gunichartables.h:
* glib/gunicode.h:
* tests/casefold.txt:
* tests/casemap.txt: Updated to Unicode 4.1. There are five new
GUnicodeBreakType types. That may break some applications, like
Pango <= 1.10.
Tue Sep 20 13:16:04 2005 Tim Janik <timj@imendio.com>
* glib/gpattern.c (g_pattern_ph_match): applied significant recursion
complexity optimization, based on a patch from Matthias Clasen.
* tests/patterntest.c: more tests, mostly from matthias.
Mon Sep 19 17:23:23 2005 Tim Janik <timj@imendio.com>
* glib/gpattern.c: applied a patch from matthias which checks on the
upper bound of GPatternSpec length to optimize matches.
cosmetic fixups.
* tests/patterntest.c: added more match cases.
2005-09-14 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c: Add a test for grup names of length 1.
* glib/gkeyfile.c (g_key_file_line_is_group): Accept group names
of length 1. (#316309)
2005-09-11 Sebastian Wilhelmi <seppi@seppi.de>
* tests/refcount/Makefile.am (INCLUDES): Link the the refcount
tests to the system thread library $(G_THREAD_LIBS). Fixes#313744
and #314217.
2005-08-09 Matthias Clasen <mclasen@redhat.com>
* tests/gobject/Makefile.am (test_programs): Add it here.
* tests/gobject/gvalue-test.c: Beginning of a test suite
for GValue.
2005-08-08 Matthias Clasen <mclasen@redhat.com>
* tests/convert-test.c: Enable the endianness test.
* glib/gconvert.c: Make the caching of iconv descriptors
optional.
* configure.in: Add an --enable-iconv-cache option, and
default to disabling iconv caching on new enough glibc.
Somebody with access to Solaris systems will need to test
if opening/closing of iconv descriptors is enough of
a performance problem to warrant the caching on that
platform. Note that the caching is causing correctness
problems in some corner cases, thus turning it off
is desirable unless it has severe performance implications.
2005-08-08 Matthias Clasen <mclasen@redhat.com>
* tests/Makefile.am: Add convert-test here.
* tests/convert-test.c: Add the beginning of a testsuite
for g_convert() and friends.
2005-08-02 Tor Lillqvist <tml@novell.com>
* tests/refcount/objects.c
* tests/refcount/properties.c
* tests/refcount/signals.c: Use g_usleep() instead of sleep() for
portability.
Mon Aug 1 23:33:47 2005 Tim Janik <timj@imendio.com>
* tests/refcount/closures.c: test high contention on closure
reference counts to trigger and catch non-atomic updates.
* tests/refcount/objects.c:
* tests/refcount/objects2.c:
* tests/refcount/properties.c:
* tests/refcount/properties2.c:
* tests/refcount/signals.c:
fixed up test and threading fundamentals. variables accessed from all
threads need to be volatile. context switches are enforced by using
g_thread_yield(), not g_usleep(1) which may result in busy waits on
some platforms. for testcode, always consider all warnings and
critical messages fatal. issue the currently running program on
stdout. improved progress indicators.
* tests/refcount/properties.c:
* tests/refcount/objects.c:
don't overdo the number of testing threads to keep the testing machine
usable, 2 threads can produce as much contention as 20 if executing the
same code.
* tests/refcount/signals.c: only start 1 thread per object. GObject
doesn't provide mutually exclusive object access, but only mutually
exclusive reference count modification.
* tests/Makefile.am: added closures test.
2005-08-01 Tor Lillqvist <tml@novell.com>
* tests/uri-test.c: Make it pass on Win32.
(from_uri_tests[]): Take into consideration that on Win32 we don't
return "localhost" hostnames.
(safe_strcmp_filename): New function that considers slash and
backslash equal on Win32.
(run_roundtrip_tests): Use safe_strcmp_filename().
2005-07-20 Matthias Clasen <mclasen@redhat.com>
* glib/gthreadpool.c (g_thread_pool_free): Don't get
stuck in here if immediate is TRUE. (#310954,
Hong Jen Yee)
* tests/threadpool-test.c (main): Test immediate == TRUE.
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-07-12 Matthias Clasen <mclasen@redhat.com>
* glib/goption.h (G_OPTION_FLAG_NOALIAS):
* glib/goption.c: Add and implement a new flag
to turn off the automatic <groupname>- prefixing
for conflict resolution of long option names. (#171840,
Adam McLaurin)
All optional callback arguments (#308886, Pawel
Sliwowski)
* glib/goption.h (G_OPTION_FLAG_OPTIONAL_ARG):
* glib/goption.c: Add and implement a new flag
to indicate that a callback *optionally* takes another
argument.
* tests/option-test.c: Add tests for optional arguments.
2005-07-01 Matthias Clasen <mclasen@redhat.com>
* glib/gkeyfile.c (g_key_file_get_key_comment):
(g_key_file_get_top_comment): Don't reverse the order of multiline
comments.
(g_key_file_get_group_comment): Actually get the group comment.
* tests/keyfile-test.c (test_comments): Test that comments are
handled properly. (#309263, Mikael Magnusson)
2005-07-01 Matthias Clasen <mclasen@redhat.com>
* tests/keyfile-test.c (test_comments): Test that comments are
handled properly. (#309263, Mikael Magnusson)
