In case g_atomic_int_compare_and_exchange() check fails we ended up doing
another atomic get to figure out what it was the old reference count,
however, we can avoid this by using the full version of the function that
returns the value before the exchange happened as an out value.
If a deprecated property only gets set because it is G_PARAM_CONSTRUCT
or G_PARAM_CONSTRUCT_ONLY, then there is nothing for the library user
to fix, and we should not emit a deprecation warning.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/2748
Signed-off-by: Simon McVittie <smcv@collabora.com>
All of these warnings indicate programmer error, so critical is most
appropriate here.
Exceptions: deprecation warnings are just warnings. Also, warnings that
are worded with uncertainty can remain warnings rather than criticals.
When I optimized GObject to skip property notification
in some cases, I looked for whether the class has a
custom notify vfunc. I overlooked that that
dispatch_properties_changed can also be customized,
and if it is, we better not skip change notification.
This showed up as breakage in the adjustment tests
in the GTK testsuite.
When weak references are being cleaned up, it is possible for the `qdata` for
both `quark_weak_locations` and `quark_weak_refs` to have been deallocated,
so that `g_datalist_id_get_data()` returns `NULL` for both. This happens
when `g_object_run_dispose()` is called for the target of a `GBinding`,
and is not an error.
See https://gitlab.gnome.org/GNOME/glib/-/issues/2676
This makes calls to g_signal_connect_data() and g_signal_connect_object()
with default flags more self-documenting.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is a partial revert of commit fa8c7c0da using the approach
suggested (and tested) by Kjell Ahlstedt.
It is intended to be temporary pending a proper dig into what’s causing
the regression, just so we can get the 2.73.1 release out.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2672
Coverity notices the `g_object_unref()` call in `g_object_notify()`, but
not the paired `g_object_ref()` call. It therefore incorrectly assumes
that every call to `g_object_notify()` frees the object. This causes a
lot (hundreds) of false positive reports about double-frees or
use-after-frees.
I can’t find a way to fix this using a model file, so the other options
are:
* Manually mark every report as a false positive and keep updating them
as the code changes over time. This would take a lot of maintainer
effort.
* Comment out the `g_object_ref()`/`g_object_unref()` calls when
running static analysis (but not in a normal production build). This
is ugly, but cheap and shouldn’t impact maintainability much.
So this commit implements option 2.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This prevents `-Wunused-function` warnings on platforms which don’t have
`HAVE_OPTIONAL_FLAGS` defined.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
g_object_new_with_custom_constructor needs to handle
freezing notifications in the same way as
g_object_new_internal.
Fixing a bug pointed out by Christian Hergert.
The corner-case we are handling here is that
we don't freeze the notify queue in g_object_init
(because there's no custom ->notify vfunc, but
then we gain a notify handler during instance
init, and instance init also triggers a
notification. Handle this by jit freezing
notification in g_object_notify_by_spec_internal.
Note that this is bad code - instance init really
shouldn't be doing things like this.
Testcase included.
Fixes: #2665
We need to match the conditions in g_object_init
for when we already have a freeze. Without that,
we underflow the freeze count and trigger a
warning.
Fixes: #2666
When the param specs are provided as an array
with g_object_class_install_properties, keep
a copy of that array around and use it for
looking up properties without the param spec
pool.
Note that this is an opportunistic optimization -
currently, it only works for properties of the
class itself, not for parent classes, and it
only works if the property names are identical
string literals (we're at the mercy of the linker
for that).
If we don't get lucky, we fall back to using
the pspec pool as usual.
This may fix Coverity assuming that pspecs are leaked, which is causing
tens and tens of false positives in the latest Coverity reports for
GLib.
Ensure that the pspecs are sunk (if floating) even if adding them to the
class fails (due to validation failure or an identically named property
already existing).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If we have no nontrivial notify vfunc, and no signal
handlers for notify, we don't need to maintain the
notify queue. No need to notify if nobody's listening.
Check whether an object has a nontrivial notify vfunc
and avoid creating and updating the notify queue if
it doesn't. We know that there can be no notify signal
handlers at this point. No need to notify if nobody's
listening.
We currently keep a flag for whether an object has
ever had any signal handlers. But even if it had signal
handlers, it may not have any notify handlers. Keep that
information separately, so we can speed up property setting.
According to the commit that introduced these
calls (4b334ef8f1), we are checking
the refcount here to avoid calling g_object_ref
when the refcount is 0, in the rare case that
notification would be triggered during finalize.
But we are now freezing notifications during
finalize, and after recent changes, we no longer call
g_object_ref for notification while a freeze is
in place.
We only need to take a ref on the object when
we call out to external code (ie around
->dispatch_properties_changed). If we avoid
the signal emission, we can avoid the ref/unref
too. This is not currently happening, but
might in the future.
A small reorg that reduces the code and matches
what we do for object_get_property.
Note that as a consequence of this change, we now
check the deprecated flag on the redirected property,
not on the original when setting properties. This
matches what we were already doing for getting
properties.
The code that emits property deprecation warnings
rarely runs, and doesn't need to be inlined
everywhere. It is enough to inline the check for
the deprecation flag.
It is safe not to copy arguments here,
because we are not emitting any signals
before we are done setting the values
as properties.
This matches what we do for g_object_new now.
We can safely use the values without copying here.
This is safe because we are not emitting any
signals before we are done setting the values
as properties.
These have all been added manually, as I’ve finished all the files which
I can automatically detect.
All the license headers in this commit are for LGPL-2.1-or-later, and
all have been double-checked against the license paragraph in the file
header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
This avoids walking the construct params list
one extra time just to count when constructing
objects, for a small speedup of object construction
in the presence of construct params.
Avoid GValue transformation when we can, using
the new value_is_valid vfunc.
This is particularly useful for string properties,
where g_value_transform will make a copy of the string.
In several places we do paired calls of g_value_init
and g_value_unset, both of which peek the value table.
We can avoid half of that cost by remembering the value
table, instead of looking it up again.
This uses the new G_VALUE_COLLECT_INIT2 macro.
Drop the redundant `PROP_0` (which isn’t a real property) and initialise
the first member of the enum instead.
Add a typedef so that the enum type can be used in `switch` statements
in `get_property()` and `set_property()` vfuncs. This allows
`-Wswitch-enum` to be used to improve type safety.
The examples here don’t have `get_property()` or `set_property()`
vfuncs, but people might copy/paste the code to somewhere which does.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Make it a bit clearer in the documentation that using
`G_PARAM_STATIC_STRINGS` everywhere is a good thing.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Notifying during object destruction is a dubious "feature": objects
might end up recreating a bunch of state just before clearing it;
language bindings might get spurious notifications during garbage
collection runs.
We freeze the notification queue before running the dispose() chain; if
the object was temporarily vivified during dispose, we thaw the
notification queue, otherwise we let the instance clear it when we
finalize it.
See: https://gitlab.gnome.org/GNOME/gjs/-/issues/445
We now guarantee that GObjects will always be allocated at least as
aligned as the basic types. If you want to put an element in your
GObject which has higher alignment requirements, we can’t guarantee it
will be aligned*. If you need it to be aligned, you’ll need to put it on
the heap (aligned appropriately), or add appropriate padding in your
GObject struct.
*Actually, GSlice will guarantee that the whole GObject is aligned to at
least the power of 2 greater than or equal to the size of the GObject,
which means any element in the GObject struct should always be
appropriate aligned if the compiler pads it appropriately. If malloc()
is used, however, it doesn’t make that guarantee, so we can’t make that
guarantee overall.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1231
See the reasoning in the patch for why we believe GObjects *are*
(already) as aligned as the basic types.
We want to make this guarantee so that it’s guaranteed to be safe for
people to ignore -Wcast-align warnings for GObjects which contain basic
types. This typically happens with gdouble on 32-bit ARM platforms.
The checks are slightly complicated by the need to support GObjects with
custom constructors. We should expect that a custom construction
function will chain up to g_object_constructor (which calls
g_type_create_instance() as normal), but it’s possible that someone has
done something crazy and uses a custom allocator which doesn’t return
with the same alignment as GSlice. Hand them a warning in that case. If
that is true, the code which uses their custom-constructed GObject can
presumably already deal with the alignment it gets given.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1231
When an object with toggle reference is notifying a change we just
assume that this is true because of previous checks.
However, while locking, another thread may have removed the toggle
reference causing the waiting thread to abort (as no handler is set at
that point).
To avoid this, once we've got the toggle references mutex lock, check
again if the object has toggle reference, and if it's not the case
anymore just ignore the request.
Add a test that triggers this, it's not 100% happening because this is
of course timing related, but this is very close to the truth.
Fixes: #2394
The previous wording was not clear about what happens if a new weak ref
is taken during disposal (shortly after resurrecting the object with a
new strong ref, otherwise taking the weak ref is invalid).
See: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2064/diffs#note_1270092
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2390
No need to call memset in the loop, we can just
initialize all the values in one go.
GtkBuilder is now using g_object_setv, so this
may improve application start times a bit.
As per the previous change, an object that had weak locations set may
need to lock again the weak locations mutex during qdata cleanup, but
we can avoid this when we know we're removing the last location, by
removing the qdata entry and freeing the data.
In case a new location is needed for the same object, new data will be
added.
However, by doing this the weak locations during dispose may be
invalidated once the weak locations lock is passed, so check again if
this is the case while removing them.
It can happen that a GWeakRef is added to an object while it's disposing
(or even during finalizing) and this may happen in a thread that (weak)
references an object while the disposal isn't completed yet or when
using toggle references and switching to GWeakRef on notification (as
the API suggests).
In such scenario the weak locations are not cleaned up when the object
is finalized, and will point to a free'd area.
So, during finalization and when we're sure that the object will be
destroyed for sure, check again if there are new weak locations and
unset them if any as part of the qdata destruction.
Do this adding a new utility function so that we can avoid duplicating
code to free the weak locations.
Added various tests simulating this case.
Fixes: #2390
GTK currently checks if a GtkWidget is finalized while still using a
floating reference—i.e. a widget was disposed without any parent
container owning it.
This warning can be useful to identify and trace ownership transfer
issues in libraries using initially unowned floating object types.
To avoid introducing constraints ex post, we can gate this check behind
both the G_ENABLE_DEBUG compile time flag for GLib, and behind the
G_ENABLE_DIAGNOSTIC environment variable run time check.
Fixes: #2489
When rendering the contents of the GLib documentation stored inside the
introspection data, a common behaviour is to take the first paragraph as
a summary of the symbol being documented.
The documentation is assumed to be in Markdown format, which means:
- paragraphs must be separated by newlines
- lines that have an indentation of four or more spaces are considered
code blocks
- lines that start with a `#` are considered titles
This means we need to slightly tweak the documentation in our sources to
ensure that it can be rendered appropriately by tools that are not
gtk-doc.
See issue: #2365
This works in the same way as g_variant_take_ref(), and for the same
reason.
Updated and Rebased by Nitin Wartkar <nitinwartkar58@gmail.com>
Closes#1112
gjs has some situations where it's not always aware of the @data that
was passed into g_object_add_toggle_ref, so allow passing %NULL to
just match on @notify.
Rebased and updated by Nitin Wartkar
Closes#817
This especially has the effect that any GWeakRefs to the object will not
necessarily be set to NULL yet if called as part of
g_object_run_dispose() and not as part of g_object_unref().
gobject/gobject.c: In function ‘g_object_new_internal’:
gobject/gobject.c:1962:25: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1962 | for (j = 0; j < n_params; j++)
| ^
gobject/gobject.c:1989:21: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1989 | for (i = 0; i < n_params; i++)
| ^
gobject/gobject.c: In function ‘g_object_new_with_custom_constructor’:
gobject/gobject.c:1836:21: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1836 | for (j = 0; j < n_params; j++)
| ^
gobject/gobject.c:1914:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
1914 | for (i = 0; i < n_params; i++)
| ^
gobject/gobject.c: In function ‘g_object_class_install_properties’:
gobject/gobject.c:766:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘guint’ {aka ‘unsigned int’}
766 | for (i = 1; i < n_pspecs; i++)
| ^
These variables were already (correctly) accessed atomically. The
`volatile` qualifier doesn’t help with that.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
The previous code consumed a larger additional amount of stack space.
That is because it would allocate the temporary buffer for GValues on
the stack with "g_newa (GValue, 1)" and thus the required stack
space grew with the number of arguments. Granted, this is already
a variadic C function, so the caller already placed that many elements
on the stack. For example, on the stack there are the property names
and the pointers to the arguments, which should amount to roughly
O(n_args * 16) (on 64 bit, with pointers being 8 bytes large).
That is not bad, because it means in the previous version the stack space
would grow linear with the already used stack space. However, a GValue is
an additional 24 bytes (on 64 bit), which probably more than doubles the
required stack space. Let's avoid that, by allocating the temporary list
on the heap after a certain threshold. This probably more than doubles the
number of possible arguments before the stack overflows.
Also, previously the heap allocated "params" array only grew one element
per iteration. Of course, it is likely that libc anyway reallocates
the buffers by growing the space exponentially. So realloc(ptr, 1)
probably does not O() scale worse than doubling the buffer sizes ourselves.
However, it seems clearer to keep track of the allocated sizes ourself, and
only call realloc() when we determine that we are out of space.
Especially because we need to update the value pointers on reallocation.
Note that we now require a heap allocation both for the "params" and the
"values" list. Theoretically that could be combined by using one buffer
for both. But that would make the code more complicated.
Now we pre-allocate buffers for 16 elements on the stack. That
is (16 * (16 + 24) bytes (or 640 bytes) on the stack. I think that
is still acceptable.
Two out of three callers pass the count argument from a variable
of type guint. And the third is currently an always positive gint.
We should use the correct integer type that matches the type as it
used otherwise.
Rather than using a mixture of ‘instantiable’ and ‘instantiatable’
everywhere, standardise on the term which is already in the public API.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The various `g_strdup_printf()` returns values in the implementations of GValue
lcopy_func are runtime checks which could be disabled if one wants and therefore
should be handled as such with g_return_val_if_fail()
Rename the variables involved so that people get a slightly more
obvious critical warning when they try to ref an object which has
already been finalised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As with `g_variant_new()` (or any varargs function which takes integer
literals of differing widths), callers need to be careful to ensure
their integer literals have the right width.
Tweak the documentation for `g_object_new()`, `g_object_set()` and
`g_object_get()` to clarify this. The documentation for `g_object_get()`
shows that it is not subject to the same caveats, since it operates on
pointers.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #833
This uses a 32bit hole in the GObject structure on 64bit arches
as a flag field which can be optionally used for some preformance hints.
Currently there is a flag that gets set any time you connect to a signal
on a GObject which is used as early bailout for signal emissions, and using
the flags field instead of a user-data for checking if a GObject is
under construction.
"Uninitialized value" is partially correct, since it has not been
initialized with a type, but it's more precise to say
"zero-initialized value". It is still a programming error to pass a
pointer to uninitialized memory with arbitrary contents as the value.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Using the generic marshaller has drawbacks beyond performance. One such
drawback is that it breaks the stack unwinding from the Linux kernel due
to having unsufficient data to walk past ffi_call_unixt64. That means that
performance profiling by application developers looks grouped among
seemingly unrelated code paths.
Related to GNOME/Initiatives#10
