GDBusConnection sends each signal to recipients in a separate idle
callback, and there's no particular guarantee about the order in which
they're scheduled or dispatched. For the NameOwnerChanged signal that
reports the name becoming unowned, it's possible that g_bus_watch_name()
gets its idle callback called before the GDBusProxy:g-name-owner
machinery has updated the name owner, in which case the assertion
will fail.
Fixing GNOME/glib#3268 introduced a new subscription to NameOwnerChanged
which can alter the order of delivery, particularly in the case where
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE was used (as tested in
/gdbus/proxy/no-match-rule). The resulting test failure is intermittent,
but reliably appears within 100 repetitions of that test.
Fixes: 511c5f5b "tests: Wait for gdbus-testserver to die when killing it"
Signed-off-by: Simon McVittie <smcv@debian.org>
This was a bug that existed during development of this branch; make sure
it doesn't come back.
This test fails with a use-after-free and crash if we comment out the
part of name_watcher_unref_watched_name() that removes the name watcher
from `map_method_serial_to_name_watcher`.
It would also fail with an assertion failure if we asserted in
name_watcher_unref_watched_name() that get_name_owner_serial == 0
(i.e. that GetNameOwner is not in-flight at destruction).
Signed-off-by: Simon McVittie <smcv@collabora.com>
The vulnerability reported as GNOME/glib#3268 can be characterized
as: these signals from an attacker should not be delivered to either
the GDBusConnection or the GDBusProxy, but in fact they are (in at
least some scenarios).
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268
Signed-off-by: Simon McVittie <smcv@collabora.com>
The expected result is that because TEST_CONN_SERVICE owns
ALREADY_OWNED_NAME but not (yet) OWNED_LATER_NAME, the signal will be
delivered to the subscriber for the former but not the latter.
Before #3268 was fixed, it was incorrectly delivered to both.
Reproduces: https://gitlab.gnome.org/GNOME/glib/-/issues/3268 (partially)
Signed-off-by: Simon McVittie <smcv@collabora.com>
If a connection has two signal subscriptions active for the same signal,
one with arg0 matching and one without, a signal which doesn’t contain
an arg0 value (i.e. `g_dbus_message_get_arg0()` returns `NULL`) will
cause `NULL` to be passed to `strcmp()` when checking for a match
against the signal subscription which *has* arg0 matching, causing a
crash.
Fix that by adding the obvious `NULL` check, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3342
D-Bus Activation allows passing an array of parameters. Allow apps to
export actions that accept tuples to match the number of elements in the
parameters so the full potential of the D-Bus interface can be used.
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3333
Basically various trivial instances of the following MSVC compiler
warning:
```
../gio/gio-tool-set.c(50): warning C4267: '=': conversion from 'size_t' to 'int', possible loss of data
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
On GNOME/glib#3268 there was some concern about whether this would
allow an attacker to send signals and have them be matched to a
GDBusProxy in this situation, but it seems that was a false alarm.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This somewhat duplicates test_connection_signals(), but is easier to
extend to cover different scenarios.
Each scenario is tested three times: once with lower-level
GDBusConnection APIs, once with the higher-level GDBusProxy (which
cannot implement all of the subscription scenarios, so some message
counts are lower), and once with both (to check that delivery of the
same message to multiple destinations is handled appropriately).
Signed-off-by: Simon McVittie <smcv@collabora.com>
There were a couple of functions in `GDBusConnection` which take a
`user_data` argument, but which then leak it if they error out early.
A true positive spotted by scan-build!
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #1767
The source language of GLib is technically en-US, so we should
consistently use en-US spellings.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3269
g_file_copy_async() and g_file_move_async() are written in a way that is
not bindable with gobject-introspection. The progress callback data can
be freed once the async callback has been called, which is convenient
for C, but in language bindings the progress callback closure is
currently just leaked.
There is no scope annotation that fits how the progress callback should
be treated:
- (scope call) is correct for the sync versions of the functions, but
incorrect for the async functions; the progress callback is called
after the async functions return.
- (scope notified) is incorrect because there is no GDestroyNotify
parameter, meaning the callback will always leak.
- (scope async) is incorrect because the callback is called more than
once.
- (scope forever) is incorrect because the callback closure could be
freed after the async callback runs.
This adds g_file_copy_async_with_closures() and
g_file_move_async_with_closures() for the benefit of language bindings.
See: GNOME/gjs#590
This is an introspection-friendly version of g_settings_bind_with_mapping.
Having two callbacks that share the same user data is not supported by
girepository, so the existing function is not introspectable.
Closes: #564
These consistently fail on scheduled CI runs, which is not helping our
ability to catch Hurd regressions.
For example, https://gitlab.gnome.org/GNOME/glib/-/jobs/3709402
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
See: #3148
The gdbus-example-objectmanager visibility header was being re-created
on reconfigure, causing a needless rebuild of gdbus tests that were
using the visibility header.
All other invocations of gen_visibility_macros are via custom_target.
The symbols still have to be exported from the library (since they’re
called from unit tests), but there was never any reason for them to be
in a public header.
This means they now disappear from `Gio-2.0.gir`.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3231
This property is supposed to be used by authors of applications that use GAppliaction to output the version by --version flag or otherwise if a version is needed.
Closes#3198
Signed-off-by: Maxim Moskalets <Maxim.Moskalets@kaspersky.com>
If we're writing the body to standard output, we cannot know what the
filename of the corresponding header is going to be, but it seems
vanishingly unlikely that it will be either `stdout.h` (which we would
traditionally have generated) or `-.h` (which we would have generated
since !3886).
This makes some of the output snippets sufficiently short that black(1)
requires that they are folded into a single line.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In command-line tools, ordinary filenames normally do not have
special-cased meanings, so commit 3ef742eb "Don't skip dbus-codegen tests
on Win32" was a command-line API break: in the unlikely event that a
user wanted to write to a file named exactly `stdout`, this would have
been an incompatible change.
There is a conventional pseudo-filename to represent standard output,
which is `-` (for example `cat -` is a no-op filter). Adding support
for this is technically also a command-line API break (in the very
unlikely event that a user wants to write to a file named exactly `-`,
they would now have to write it as `./-`), but filenames starting with
a dash often require special treatment anyway, so this probably will not
come as a surprise to anyone.
When the output filename is `-` we don't want to use `#ifdef _____` as
a header guard, so special-case it as `__STDOUT__` as before.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This reverts commit fbdc9a2d03.
It was not submitted through a merge request and broke CI. Reverting it
immediately to unbreak CI and hence the rest of the development
pipeline. The changes can be re-submitted as a merge request so they’re
properly tested in CI before being merged.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3857#note_1994336
This fixes a race condition which frequently caused the
`memory-monitor-dbus.py` test to fail.
The registration of the `LowMemoryMonitor` object on the bus, and the
`GMemoryMonitorDBus`’s connection to the warning signal raced, such that
it was possible for the mock `LowMemoryMonitor` to emit a warning signal
before the `GMemoryMonitorDBus` proxy was listening, and hence the proxy
would never see the signal.
Fix this by explicitly synchronising the two before proceeding to the
tests.
Make the same changes in the `memory-monitor-portal.py` test too, even
though that one was not failing. This should remove the need for a 2s
wait on every test run.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #2887
Otherwise the test can go on to wait for a signal from the service
before it’s actually finished starting up.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
Rather than sleeping and blocking everything, use a timeout source on
the main context so that inputs can continue to be handled while waiting
for a timeout.
This introduces no functional changes to the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
It should be doing already (or the tests would never work), but make it
clearer in the code that the same `GMainContext` is being iterated as is
being woken up in the rest of the test.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #2887
I ran Bustle/dbus-monitor on the session bus while running the full GLib
test suite, and noticed that these tests were causing `Launched` signal
emissions on the main session bus. That suggested they weren’t isolated
properly, which at best causes noise on the bus and at worst could cause
spurious test failures.
Fix that by running those tests in a `GTestDBus` environment, as some of
the other appinfo tests already are.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
As seen in [CI](https://gitlab.gnome.org/GNOME/glib/-/jobs/3436216):
```
==13767== 144 (40 direct, 104 indirect) bytes in 1 blocks are definitely lost in loss record 528 of 562
==13767== at 0x4A18B2C: g_type_create_instance (gtype.c:1928)
==13767== by 0x49F92FF: g_object_new_internal (gobject.c:2235)
==13767== by 0x49FA247: g_object_new_valist (gobject.c:2574)
==13767== by 0x49F8D81: g_object_new (gobject.c:2047)
==13767== by 0x4AE2337: g_inet_socket_address_new (ginetsocketaddress.c:387)
==13767== by 0x4B1DB94: g_socket_address_new_from_native (gsocketaddress.c:230)
==13767== by 0x4B16CC2: g_socket_get_local_address (gsocket.c:2071)
==13767== by 0x40E102: test_receive_bytes_from (socket.c:2469)
==13767== by 0x4901E78: test_case_run (gtestutils.c:2974)
==13767== by 0x49022B2: g_test_run_suite_internal (gtestutils.c:3069)
==13767== by 0x490241A: g_test_run_suite_internal (gtestutils.c:3088)
==13767== by 0x4902690: g_test_run_suite (gtestutils.c:3168)
==13767== by 0x4900C8F: g_test_run (gtestutils.c:2275)
==13767== by 0x40EE8A: main (socket.c:2614)
```
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3220
There are several reasons why we might not be able to do the test setup
for --external-data: non-Linux platform, missing ld or objcopy,
objcopy doesn't support --add-symbol, or the CPU family is MIPS
(on which cc -r does not necessarily emit the specific MIPS ABI flavour
that we are targeting, for example different functionality levels or
different NaN encodings).
If we can't link in the test data, then obviously this test is not going
to pass. It was already skipped on non-Linux, but not on platforms that
hit one of the other reasons for the test setup to fail.
In particular, this test failed on Debian mips64el since commit 81059169,
which stopped linking the necessary resource on MIPS platforms, but
continued to assert that the resource is present at runtime.
Fixes: 81059169 "GIO/tests: skip test_resources_binary on MIPS platform"
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3226
Signed-off-by: Simon McVittie <smcv@debian.org>
The same struct was reused across multiple tests, but without a shared
way of freeing its members. Refactor to add one.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
This is just the result of running `black $(git ls-files '*.py')`.
For some reason, the `sh-and-py-check` CI job didn’t run on merge
request !3751, so this non-standard formatting slipped through onto
`main`.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3754#note_1939914
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
It can cause failures for shared connection objects.
What can currently happen is this:
1. A user starts to asynchronously create a proxy object
2. A user starts to asynchronously create another proxy object
At this point, the asynchronous initialization for the two proxy objects
share the not yet initialized connection object.
3. While the shared connection objected is created, the user cancels the
creation with the supplied cancellable from the fist proxy object.
4. initable_init caches the canceled error and marks the connection as
initialized.
5. The initialization of the second proxy object fails with the same
canceled error.
To avoid this, clear the error in this case and destroy any member
variables that may have been created before the creation was canceled.
This way, the initialization of the second proxy object will restart the
connection initialization and with probably succeed.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
See the previous commit. These additions were kept in a separate commit
to make the changes to the existing tests in the previous commit
clearer.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Helps: #3093
Previously, the code only validated the types of *required* message
headers, and did not validate optional ones.
Now, the headers are validated in one step, and a subsequent step checks
whether the required ones are present.
The existing tests have been updated to match the new error message
wording. More tests will be added to test the new behaviour in a
subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3093
Before checking the properties of `*_proxy`, assert that there were no
errors in constructing the proxy first. Otherwise the property checks
will crash on `NULL` pointer dereferences.
The test is still intermittently buggy somewhere, but at least this
commit will cause a relevant error message to be printed on failure.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
GDBus has always supported matching strings with arg0 matching
(`G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH`). In D-Bus 1.5, support was added
to the spec for also matching object paths. This got forgotten about and
was never added to GDBus, meaning that
`G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH` won’t match against a signal arg0
of type `o`.
Fix that, and add a unit test.
To do so, we need to add a new `g_dbus_message_get_arg0_path()` API to
complement the existing `g_dbus_message_get_arg0()` API. The approach of
letting `g_dbus_message_get_arg0()` return an object-path *or* a string
would not work, as it’s also called in the implementation of
`G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE`, which must only match
string-typed arg0 values and not object-path-typed ones.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: #3183
The `g_content_type_guess_for_tree` function segfaults currently when
processing filenames that are not valid unicode strings. Let's use the
`g_filename_to_utf8` and `g_utf8_make_valid` functions before other
processing to prevent that.
Let's also add a test for it to avoid this in future.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/3168
When `--attributes` is specified and doesn’t include `standard::name` in
its list, `gio` would print a critical warning from the (mandatory) call
to `g_file_info_get_name()`.
Fix that by making the call to `g_file_info_get_name()` optional.
Add a unit test too.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Fixes: #3158
It gives nowhere near full coverage, but it’s something we can build on
in future.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Helps: #3158
Helps: #2950
Modify all the similar Python test wrappers to set
`G_DEBUG=fatal-warnings` in the environment of the program being tested,
so we can catch unexpected warnings/criticals.
Adding this because I noticed it was missing, not because I noticed a
warning/critical was being ignored.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
The test only needs a unidirectional channel, and a pipe is sufficient
for that.
This may simplify things when running the test on Hurd; see
https://gitlab.gnome.org/GNOME/glib/-/issues/3148#note_1874198.
Additionally, set `O_NONBLOCK` on the pipe since the test seems to
expect that partial writes will succeed and that writes to a full buffer
will fail rather than block.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Helps: #3148
Various parts of the build (such as `objectmanager-rst-gen`) depend on
running `gdbus-codegen` after it’s been built, but they currently only
encode a dependency to the main codegen Python file and not the
supporting files. This can cause `gdbus-codegen` to fail with an
`ImportError` if the build races so that `objectmanager-rst-gen` is
built before the codegen supporting files.
Example failure here: https://gitlab.gnome.org/pwithnall/glib/-/jobs/3266471
```
FAILED: gio/tests/gdbus-object-manager-example/objectmanager-rst-gen-org.gtk.GDBus.Example.ObjectManager.Animal.rst gio/tests/gdbus-object-manager-example/objectmanager-rst-gen-org.gtk.GDBus.Example.ObjectManager.Cat.rst
/usr/bin/python3 gio/gdbus-2.0/codegen/gdbus-codegen --interface-prefix org.gtk.GDBus.Example.ObjectManager. --generate-rst objectmanager-rst-gen --output-directory gio/tests/gdbus-object-manager-example ../gio/tests/gdbus-object-manager-example/gdbus-example-objectmanager.xml
Traceback (most recent call last):
File "/builds/pwithnall/glib/_build/gio/gdbus-2.0/codegen/gdbus-codegen", line 53, in <module>
from codegen import codegen_main
File "/builds/pwithnall/glib/_build/gio/gdbus-2.0/codegen/codegen_main.py", line 29, in <module>
from . import dbustypes
File "/builds/pwithnall/glib/_build/gio/gdbus-2.0/codegen/dbustypes.py", line 22, in <module>
from . import utils
ImportError: cannot import name 'utils' from 'codegen' (/builds/pwithnall/glib/_build/gio/gdbus-2.0/codegen/__init__.py)
```
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Depending on the operating system, /bin/sh might either be bash (for
example on Fedora or Arch) or dash (for example on Debian or Ubuntu)
or some other POSIX shell.
When bash is asked to run a simple command with no shell keywords or
metacharacters, like this one, it replaces itself with the program
via execve(), but dash does not have that optimization and treats it
like any other program invocation in a larger script: it will fork,
exec the program in the child, and wait for the child in the parent.
This seems like it conflicts with sleep_and_kill() assuming that it can
use the subprocess's process ID as the sleep(1) process ID. Specifically,
if it sends SIGKILL, it will go to the sh(1) process and not the sleep(1)
child, which could result in the sh(1) process being terminated and
its sleep(1) child being leaked.
To get the bash-like behaviour portably, explicitly use the exec builtin
to instruct the shell to replace itself with sleep(1), so that the
process ID previously used for the shell becomes the process ID of the
sleep process.
This appears to resolve an intermittent hang and test timeout on Debian
machines (especially slower ones), although I'm not 100% clear on the
mechanics of how it happens.
Resolves: https://gitlab.gnome.org/GNOME/glib/-/issues/3157
Signed-off-by: Simon McVittie <smcv@collabora.com>
`test-generated.txt` is listed in `test.gresource.xml`, so it needs to
be specified as a dependency in the `custom_target()` which uses
`test.gresource.xml`.
Fixes intermittent build failures like:
```
FAILED: gio/tests/test.gresource
/builds/GNOME/glib/_build/gio/glib-compile-resources --compiler=gcc --target=gio/tests/test.gresource --sourcedir=/builds/GNOME/glib/gio/tests --sourcedir=/builds/GNOME/glib/_build/gio/tests --internal ../gio/tests/test.gresource.xml
../gio/tests/test.gresource.xml: Failed to locate test-generated.txt in any source directory.
```
See !3671 and #3163.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
This reverts commit 0b9900e4e7.
The dependency was added in the wrong place: `test-generated.txt` is
needed when compiling `test.gresource`, not when compiling the test
which ultimately uses that gresource.
See !3671 and #3163.
The PTRACE_O_EXITKILL symbol in sys/ptrace.h is an enum member, not
a macro. The #ifdef check added to the GSubprocess test-case in
272ec5dbca will not detect it.
Use cc.has_header_symbol() to properly detect it. According to the
documentation: "Symbols here include function, variable, #define,
type definition, etc.".
Fixes: 272ec5dbca
Closes: https://gitlab.gnome.org/GNOME/glib/-/issues/3156
If `update-desktop-database` or `update-mime-database` are not
installed, there are a few `GAppInfo` methods for modifying file
associations which will print a `g_warning()` when called. Something
like:
```
GLib-GIO-FATAL-WARNING: Failed to execute child process ‘update-desktop-database’ (No such file or directory)
```
(Example: https://gitlab.gnome.org/zamaudio/glib/-/jobs/3190053)
This will cause the appinfo/associations test to fail, as warnings are
fatal.
If that’s going to happen, skip the test. We can’t hard-depend on these
tools as they are external to GLib and only needed for a few operations.
Instead we have a soft runtime dependency on them; that should be
reflected in the tests.
Signed-off-by: Philip Withnall <philip@tecnocode.co.uk>
Helps: #3148
There are some flavors of MIPS ABIs, such like r6 vs legacy,
nan2008 vs nan1985 etc.
The `cc -r` may not produce the correct elf binaries.
So let's skip this test for MIPS.
Many toolchain did not change the definition of NULL to avoid introducing
breaking changes in existing codebases. For example, on Windows NULL is
0 (int) regardless of the C++ standard in use.
Fixes the following warnings on CLang when compiling for Windows:
../glib/glib/tests/cxx.cpp:539:34: warning: missing sentinel in function call [-Wsentinel]
g_test_init (&argc, &argv, NULL);
^
, nullptr
../glib/glib/gtestutils.h:298:9: note: function has been explicitly marked sentinel here
void g_test_init (int *argc,
^
../glib/gio/tests/cxx.cpp:62:34: warning: missing sentinel in function call [-Wsentinel]
g_test_init (&argc, &argv, NULL);
^
, nullptr
../glib/glib/gtestutils.h:298:9: note: function has been explicitly marked sentinel here
void g_test_init (int *argc,
^
