This allows applications to get their value regardless whether glib is a
subproject or pkgconfig:
gio_dep = dependency('gio-2.0')
giomoduledir = gio_dep.get_variable('giomoduledir')
schemasdir = gio_dep.get_variable('schemasdir')
`mock-resolver.c` is a mock implementation of `GResolver` used in the
`network-address` tests. It returns resolver results, and implements
timeouts, as directed by the test calling it.
In particular, it allows the IPv4 and IPv6 resolver results to be
returned using independent delays. This allows code paths which deal
with IPv4 and IPv6 results being returned at different times to be
tested, as the ‘Happy Eyeballs’ spec mandates various hard-coded
timeouts for returning the best results it can in a reasonable
timeframe.
Previously, `mock-resolver.c` implemented the timeouts by handling
`lookup_by_name()` in a `GTask` worker thread, and calling `g_usleep()`
for the timeout. This seemed to cause occasional CI failures, such as
https://gitlab.gnome.org/GNOME/glib/-/jobs/1843454, where a resolver
error would be returned rather than the expected results:
```
ok 52 /network-address/happy-eyeballs/ipv4-error-ipv6-first
\# GLib-GIO-DEBUG: IPv4 DNS error: IPv4 Broken
(/var/tmp/gitlab_runner/builds/Ff4WDDRj/0/GNOME/glib/_build/gio/tests/network-address:18428): GLib-GIO-DEBUG: 09:03:08.587: IPv4 DNS error: IPv4 Broken
Bail out! GLib-GIO:ERROR:../gio/tests/network-address.c:586:got_addr: assertion failed (error == NULL): IPv4 Broken (g-io-error-quark, 24)
stderr:
**
GLib-GIO:ERROR:../gio/tests/network-address.c:586:got_addr: assertion failed (error == NULL): IPv4 Broken (g-io-error-quark, 24)
```
While I’ve been unable to reproduce these failures locally, I suspect
they might be down to thread spawning occasionally taking long enough on
a CI runner to change the ordering of the timeouts, such that the ‘Happy
Eyeballs’ algorithm returns a different set of results from what the
test expects.
So, this commit rewrites part of `mock-resolver.c` to implement timeouts
in the main thread, rather than in a worker thread. That should
eliminate the delays in spawning threads, and should mean that the
timeout sources in `mock-resolver.c` are attached to the same
`GMainContext` as those from the ‘Happy Eyeballs’ algorithm which are
monitoring them, so a total order over the timeouts can be guaranteed.
Of course, I might be completely wrong since this is just a guess and I
can’t properly test it since I can’t reproduce the failure. Worth a try.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The test results weren’t being freed.
This makes the `network-address` test clean under memcheck for me.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If these struct members aren't available, we can be more like an
abstraction layer by falling back to yielding 0.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Test failures were previously ignored on macOS because there are 12
tests which consistently fail (and have not yet been fixed, because
there are no regularly active macOS maintainers for GLib; you could help
here!).
However, this means that new test failures can’t be spotted.
So, explicitly mark those 12 tests as `should_fail` on macOS, and then
make other test failures cause failure of the CI run.
We can track the process of fixing those 12 tests on #1392 and #1251.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1392
As they use `g_test_dbus_*()`, they depend on dbus-daemon, so move them
to the part of the Meson file which lists those tests.
This disables them running on platforms which don’t have `dbus-daemon`
available. Arguably, this should be done by returning an error from
`g_test_dbus_up()` and then calling `g_test_skip()`, so the test is
correctly recorded as having been skipped. But that’s a fix for another
time.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Having compared the debug output, it doesn’t show anything unusual
happening that can’t already be seen from other output, for this test.
This is a partial revert of 8fd71dccc5. The debugging output it added to
other tests may still be useful.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1929
The retry loop for acquiring the lock for the authentication cookie file
currently tries to acquire the lock for 0.5s, then gives up, assumes the
lock file is stale, and deletes it.
That’s great if the lock file *is* stale because it’s been left there by
a crashed process.
It’s not so great if the lock file just happens to have been there every
time this process checked, because the cookie file is highly contested
while (for example) running lots of parallel unit tests.
Check for that situation by comparing the mtime of the lock file and
continuing to retry if it’s changed.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1929
Rather than tracking them with a counter. This should close the race in
tracking the finalisation of the tasks by the task worker thread.
There’s no way to synchronise with that thread as it’s internal to
`g_task_run_in_thread()`.
This should hopefully stop the `debugcontroller` test being flaky.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2486#note_1384102
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
We are matching `<parameter>` as well as `<para>`, and we
end up with broken XML in case the (expanded) description
starts with `<parameter>`.
Fixes: #2601
This allows the controller to explicitly be removed from the bus, in a
way that allows the caller to synchronise with it and know that all
other references to the controller should have been dropped (i.e. after
this method returns, there should be no in-flight D-Bus calls still
holding a reference to the object).
This is needed to be able to guarantee finalisation of the controller in
unit tests (and comparable real-world situations).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
The resources data is generated for both GCC and MSVC toolchains, even
though we know beforehand which toolchain we're going to compile it for.
By dropping the data duplication we make the generated resources file
faster to compile, especially when dealing with large embedded data,
instead of relying on the C pre-processor to walk the whole file and
discard the branch we're not using.
There shouldn’t be any issues here with empty argv arrays since an empty
`Exec=` line is already checked for. Encode that explicitly with an
assertion.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This won’t really affect anything, but we might as well fix them to not
crash if called with an empty `argv` by someone (ab)using `execve()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
While it’s not usual, it is possible for applications to be called with
an empty `argv` by a process (ab)using `execve()`. Modify the
`GApplication` code example to handle that possibility, so that anyone
copying the example isn’t introducing a bug into their program
immediately.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If `GDebugControllerDBus` remains as the only, or default,
implementation of `GDebugController`, `dup_default()` cannot work.
`GDebugControllerDBus` requires a `GDBusConnection` at construction
time, which the `GIOModule` construction code can’t provide it.
Either we use a default D-Bus connection (but which one? and how would
it be changed by the user later if it was the wrong one?), or delegate
singleton handling of the `GDebugController` to the user.
The latter approach seems more flexible.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
On Windows, dbus is launched by spawning the gdbus.exe executable on
demand from the gio module. When linked dynamically, the executable
path is guessed relatively to the gio DLL path. But when linked
statically, the only reference path available is the current
executable path. In this case, gdbus.exe is not necessarily in the same
folder as the current executable.
This patch solves the issue using the same algorithm as the one used
with process spawning in glib core source code two commits above.
This is intended to provide a uniform interface for controlling whether
the debug output from an application (or service) is emitted, typically
to journald, but actually to wherever the application chooses to output
it.
The main implementation of `GDebugController` is `GDebugControllerDBus`,
which is intended to be used on Linux. Other implementations may be
added in future for other platforms, or larger applications may want to
provide their own implementation which integrates with their ecosystem.
The `GDebugControllerDBus` implementation exposes a D-Bus interface at
`/org/gtk/Debugging` with a method to enable or disable debug
output at runtime.
This could be used by external harnesses, such as GNOME Builder or
systemd, to give a uniform way to get debug output from an application.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1190
As with the previous commit, this isn’t needed for GLib’s tests to work
correctly, but is probably needed in other projects which might be
tempted to copy and paste the Meson tooling from GLib.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4330
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This isn’t needed to make the tests any better (it doesn’t really affect
them), but is probably needed for anyone who copies this Meson code in
order to add `glib-compile-resources` support to their project. It’s
pretty unlikely that someone would want to compile *and export* a
resource from a shared library.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4334
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Credentials are often used to check peer processes details.
With AF_UNIX sockets on Windows, SIO_AF_UNIX_GETPEERPID can
be used to retrive the peer PID.
We will probably introduce more advanced mechanisms later on, though,
but I am not a Windows API expert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
On !UNIX, return an error for send_fd() & receive_fd().
(the unixfdmessage unit is not compiled on !UNIX)
The header is installed under the common GIO include directory.
Ensure G_TYPE_UNIX_CONNECTION is registered on all platforms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The header is now also installed under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move the header under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
They are not allowed in the specification, and can lead to infinite
loops when parsing.
That’s a security issue if your application is accepting D-Bus messages
from untrusted peers (perhaps in a peer-to-peer connection). It’s not
exploitable when your application is connected to a bus (such as the
system or session buses), as the bus daemons (dbus-daemon or
dbus-broker) filter out such broken messages and don’t forward them.
Arrays of zero-length elements are disallowed in the D-Bus
specification: https://dbus.freedesktop.org/doc/dbus-specification.html#container-types
oss-fuzz#41428, #41435Fixes: #2557
Glib cannot be built statically on Windows because glib, gobject and gio
modules need to perform specific initialization when DLL are loaded and
cleanup when unloaded. Those initializations and cleanups are performed
using the DllMain function which is not called with static builds.
Issue is known for a while and solutions were already proposed but never
merged (see: https://gitlab.gnome.org/GNOME/glib/-/issues/692). Last
patch is from version 2.36.x and since then the
"constructor/destructor" mechanism has been implemented and used in
other part of the system.
This patch takes back the old idea and updates it to the last version of
glib to allow static compilation on Windows.
WARNING: because DllMain doesn't exist anymore in static compilation
mode, there is no easy way of knowing when a Windows thread finishes.
This patch implements a workaround for glib threads created by calling
g_thread_new(), so all glib threads created through glib API will behave
exactly the same way in static and dynamic compilation modes.
Unfortunately, Windows threads created by using CreateThread() or
_beginthread/ex() will not work with glib TLS functions. If users need
absolutely to use a thread NOT created with glib API under Windows and
in static compilation mode, they should not use glib functions within
their thread or they may encounter memory leaks when the thread finishes.
This should not be an issue as users should use exclusively the glib API
to manipulate threads in order to be cross-platform compatible and this
would be very unlikely and cumbersome that they may mix up Windows native
threads API with glib one.
Closes#692
The gdbus-codegen tool generates documentation from the XML introspection
description of a D-Bus interface. Currently, only DocBook is supported at
the moment, but not every modern documentation generator can handle that
format. The reStructuredText format is a bit more well-supported,
especially in documentation generators for non-C languages.
Unlike DocBook, we get to make our own structure and conventions for how
we structure the documentation when using reStructuredText.
When parsing a comment we're adding <para> elements ourselves, but the
DocBook generator already wraps any block of text that does not start
with a <para> element with one.
xucred does not provide the peer pid id, but this can be fetched
from the socket LOCAL_PEERPID option. Note that we only support
it when creating the credentials from a local socket, if
the credential comes from a message over a socket the peer
pid id will not be set and -1 will be returned when trying
to get the pid for the credential.
D-Bus reference implementation doesn't require more than the claimed
process SID as part of the AUTH initial data for EXTERNAL.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The code is based from #1351 patch and existing similar code in
gdbusprivate.c. The next commit will replace that existing code with
those helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This commit puts an additional underscore before the external symbol
`_g_binary_test1_resource_data` when using gcc for Windows, to match
the compiler's expectation.
Fixes#2571
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
Using ld_flags would work, but that does not propagate ldflags to users
of glib. Meson's dependency() call will propagate apple framework
dependencies to downstream users.
Not everything should be an int. This code is quite dated. We now try to
use `guint8*` to represent arbitrary binary data, rather than `guchar*`
(which makes it sound like some form of string).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
While it’s not a supported public part of the API, exporting this
symbol from the library means we can easily test the DNS record parser,
which is important to do since it handles untrusted data from the
network.
This tests for #2503. It's fragile, but there is no non-fragile way to
test this. If the test breaks in the future, it will pass without
successfully testing the bug, not fail spuriously, so I think this is
OK.
We should run test_pass_fd twice, once using gspawn's fork/exec codepath
and once attempting to use its posix_spawn() codepath. There's no
guarantee we'll actually get the posix_spawn() codepath, but it works
for now on Linux.
For good measure, run it a third time with no flags at all.
This causes the test to fail if I separately break the fd remapping
implementation. Without this, we fail to test fd remapping on the
posix_spawn() codepath.
Specs say that on Unix id should be desktop file id from the xdg menu
specification, however, currently code just uses basename of .desktop file.
Fix that by finding the .desktop file in all the desktop_file_dirs and use
basename only as a fallback.
See https://specifications.freedesktop.org/menu-spec/latest/go01.html#term-desktop-file-id
and https://specifications.freedesktop.org/desktop-entry-spec/latest/ar01s02.html#desktop-file-id
"To determine the ID of a desktop file, make its full path relative to the
$XDG_DATA_DIRS component in which the desktop file is installed, remove the
"applications/" prefix, and turn '/' into '-'."
Also, add unit test that verifies Desktop Id is being correctly set
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
This is sad, but GResolver has one member variable for historical
reasons, to implement the reload signal. Since it offers a global
singleton, we should make sure it's really safe to use from multiple
threads at once.
This call was needed once upon a time, when GResolver had subclasses
that presumably relied on this. Nowadays, we have only
GThreadedResolver, which does not need it. res_init() is dangerous
because it modifies global state, so let's get rid of it.
meson in git master now warns about a missing `check:` kwarg, and may
eventually change the default from false to true.
Take the opportunity to require `objcopy --help` to succeed -- it is
unlikely to fail, but if it does something insane happened.
We used to use a pipe for the dbus daemon stdout to read the defined
address, but that was already requiring a workaround to ensure that dbus
daemon children were then able to write to stdout.
However the current implementation is still causing troubles in some
cases in which the daemon is very verbose, leading to hangs when writing
to stdout.
As per this, just don't handle stdout ourself, but use instead a
specific pipe to get the address address. That can now be safely closed
once we've received the data we need.
This reverts commit d80adeaa96.
Fixes: #2537
The code in `g_dbus_message_new_from_blob()` has now been fixed to
correctly error out on all truncated messages, so there’s no need for an
arbitrary programmer error if the input is too short to contain a valid
D-Bus message header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2528
Perform strict bounds checking when reading data from the D-Bus message,
and propagate errors to the callers.
Previously, truncated D-Bus messages could cause out-of-bounds reads.
This is a security issue, but one which is only exploitable when
communicating with an untrusted peer (who might send malicious
messages). Almost all D-Bus traffic is with a session or system bus,
where the dbus-daemon or dbus-broker is trusted, and is known to have
already rejected malformed (malicious) messages.
Accordingly, this is only exploitable with peer-to-peer D-Bus
conversations with an untrusted peer.
(Includes some minor cleanups from Philip Withnall.)
oss-fuzz#17408
Fixes: #2528
Since
https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/173,
there is now a really surprising implication to using a non-default
GTlsDatabase: your database could do nothing at all other than wrap the
default database, which you would expect to result in no behavior
changes, but in fact it causes fewer security checks to be performed
during certificate verification. This is because certificate
verification moved from GTlsDatabase to GTlsConnection, allowing for
more security checks to be performed. But if using a non-default
GTlsDatabase, we have to fall back to letting GTlsDatabase to the
verification, as before.
This is the best we can do. It's not a regression for applications,
because it means applications get the previous pre-2.72 behavior. But it
does mean that new security checks added in 2.72 are not applied, which
is unfortunate, so we should warn developers about this.
This feature has been reverted for now because I messed up the
implementation and it was doing sync I/O during async API calls. Oops!
Since it's not present in 2.70 nor in 2.72, let's remove the reference
to the exact GLib version that this behavior was introduced in. I'd like
to get it working properly for 2.74, but it's not ready yet and just
changing the version to 2.74 feels optimistic.
Rather than waiting for a fixed period of time, poll in a loop until the
condition the test is expecting is true.
A better solution would be to use a `GSource` and wait until that’s
dispatched. But doing so might affect the behaviour of the
`GInputStream` under test, so busy-wait instead.
Fixes this CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/1630758
```
(some socket debug output)
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1037:test_converter_pollable: assertion failed (res == -1): (1 == -1)
```
I could not reproduce the failure remotely with a few hundred
invocations of the test, so it might only present itself on BSD, which
presumably has different socket timing behaviour from Linux.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/gio-du.c: In function 'main':
gio/tests/gio-du.c:74:11: error: parameter 'argc' set but not used
74 | main (int argc, char **argv)
| ~~~~^~~~
gio/ginputstream.c: In function 'g_input_stream_real_skip':
gio/ginputstream.c:433:31: error: comparison of integer expressions of different signedness: 'goffset' {aka 'long long int'} and 'long long unsigned int'
433 | (start + count) > (guint64) end)
| ^
gio/gwin32appinfo.c: In function 'uwp_package_cb':
gio/gwin32appinfo.c:3383:17: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < supported_extgroups->len; i++)
^
gio/gwin32appinfo.c:3389:29: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_ext = 0; i_ext < grp->extensions->len; i_ext++)
^
gio/gwin32appinfo.c:3430:35: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_verb = 0; i_verb < grp->verbs->len; i_verb++)
^
gio/gwin32appinfo.c:3463:33: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_hverb = 0; i_hverb < ext->verbs->len; i_hverb++)
^
gio/gwin32appinfo.c:3478:17: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < supported_protocols->len; i++)
^
gio/gwin32appinfo.c:3541:33: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i_hverb = 0; i_hverb < url->verbs->len; i_hverb++)
^
gio/gwin32appinfo.c: In function 'g_win32_app_info_launch_internal':
gio/gwin32appinfo.c:4799:37: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (p_index = 0; p_index <= g_strv_length (envp); p_index++)
^~
gio/gwin32packageparser.c: In function 'WIN32_FROM_HRESULT':
gio/gwin32packageparser.c:99:30: warning: comparison of integer expressions of different signedness: 'long unsigned int' and 'long int'
if ((hresult & 0xFFFF0000) == MAKE_HRESULT (SEVERITY_ERROR, FACILITY_WIN32, 0) ||
^~
This was previously done (by commit 63038d1e4c) in one of the cases
where `kill_test_service()` was called — but not the other.
This meant that one instance of `gdbus-testserver` could still be
around when (as it happens, due to the order of the tests) the
`/gdbus/proxy/no-match-rule` test was run. It would start a second
instance of `gdbus-testserver`, which would exit early due to the test
name still being owned on the bus. The first (killed) instance of
`gdbus-testserver` would then exit, leaving no test servers running, and
hence the new test would fail.
This was being seen as frequent CI failures, particularly on FreeBSD
(must have slightly different timing for process signalling and
termination from Linux).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Once upon a time, we tried to return all possible certificate errors,
but it never actually worked reliably and nowadays we have given up.
This needs to be documented because a reasonable developer would not
expect it.
Because mistakes could be security-critical, I decided to copy the same
warning in several different places rather than relying only on
cross-referencese.
These are known leaks, as they were being done in tests which were
checking precondition failures.
However, since we know what happens when the failures occur, we can
still free the input data reliably, so do that.
This improves the valgrind output for `actions` to show zero definite
leaks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `actions` test previously waited an arbitrary 100ms for various
D-Bus messages to be sent/received, before checking the results of those
messages.
Normally, this would work, but on heavily loaded CI systems, it would
sometimes fail. For example,
https://gitlab.gnome.org/GNOME/glib/-/jobs/1611701.
Fix that by waiting for the condition being checked to evaluate to true,
rather than waiting an arbitrary period of time. On faster machines,
this will speed the tests up too.
Assume that the global default `GMainContext` is in use, so a
`GMainContext*` pointer doesn’t have to be passed around.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/gcontenttype-win32.c: In function 'get_registry_classes_key':
gio/gcontenttype-win32.c:66:78: warning: comparison of integer expressions of different signedness: 'DWORD' {aka 'long unsigned int'} and 'int'
if (ExpandEnvironmentStringsW (wc_temp, wc_temp_expanded, len) == len)
^~
This allows the flag to allow interactive auth to be set. Previously, it
was unconditionally unset.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
D-Bus has an upper limit on number of Match rules and it's rather easy to hit
with a big number of proxies with signal subscriptions. This happens with
NetworkManager with hundreds of devices or connection settings. By passing
G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE to g_dbus_connection_signal_subscribe(), the
user can call AddMatch with a less granular match instead of a match per every
proxy.
Tests subsequently added by Philip Withnall.
Fixes: #1109
- Isolate the first meaningful paragraph, for gi-docgen's summary
- Describe get_object() as a binding API
- Fix reference to get_item() inside get_item_type()
g_check_setuid does more than setuid checks when using AT_SECURE.
Make sure that it is referenced in the error message to help
users debug in case or errors
Closes#2518
Fix another variant of the previous commit, this time specific to the
idle callback of a method call on a subtree object, racing with
unregistration of that subtree.
In this case, the `process_subtree_vtable_message_in_idle_cb()` idle
callback already has a pointer to the right `ExportedSubtree` struct,
but again doesn’t have a strong reference to it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
If `g_dbus_connection_unregister_object()` (or `unregister_subtree()`)
was called from one thread, while an idle callback for a method call (or
a property get or set) was being invoked in another, it was possible for
the two to race after the idle callback had checked that the
object/subtree was registered, but before it had finished dereferencing
all the data related to that object/subtree.
Unregistering the object/subtree would immediately free the data,
leading the idle callback to cause a use-after-free error.
Fix that by giving the idle callback a strong reference to the data from
inside the locked section where it checks whether the object/subtree is
still registered.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2400
This is needed for an upcoming change which decouples their lifecycle
from their presence in the `map_id_to_ei` and `map_id_to_es` hash
tables.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
Move it further up the file, but make no changes to it. This will help
with a subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2400
This introduces no functional changes; it only simplifies the code.
Instead of maintaining a separate pointer to the backend iff it’s a
`GDelayedSettingsBackend`, just test the `backend` pointer’s type.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2426
Previously, the delay-apply status of the parent `GSettings` object
would be partially inherited: `settings->priv->backend` in the child
`GSettings` object would point to a `GDelayedSettingsBackend`, but
`settings->priv->delayed` would be `NULL`.
The expectation from https://bugzilla.gnome.org/show_bug.cgi?id=720891
was that `get_child()` would fully inherit delay-apply status.
So, ensure that `settings->priv->delayed` is correctly set to point to
the delayed backend when constructing any `GSettings`. Update the tests
to work again (presumably the inverted test was an oversight in the
original changes).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
`g_settings_reset()` changes the value of the setting to `NULL`;
`add_to_tree()` was not handling that correctly.
Add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
Add missing (nullable), and use 2-space indentation to avoid markdown
pre-formatted blocks when unwanted.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As this would have undesirable consequence.
Quoting Philip Withnall:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2305#note_1294729:
The documentation never said anything about accepting absolute paths,
so any code which is relying on that is relying on undocumented
behaviour. We’re allowed to change that.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
`standard::name` must be available for `g_file_enumerator_get_child()`
to work. Emit a critical warning and return if it’s not. This is similar
to the existing behaviour in `g_file_enumerator_iterate()`.
Improve the documentation to mention this.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2507
The code cannot function correctly if the `standard::name` attribute is
not present, so upgrade the existing warning to a critical warning and
return if it fails in `g_file_enumerator_iterate()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2507
It was Red Hat specific when it was introduced in 2004, was never
supported by mount(8) upstream, and was removed entirely in 2008.
It’s confusing for GLib to keep references to it around.
Thanks to Karel Zak for digging up the history of it:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2298#note_1294519
And thanks to Xidorn Quan for looking into it in the first place (see
!2298).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/gsocket.c: In function 'g_socket_get_available_bytes':
gio/gsocket.c:3141:17: warning: comparison of integer expressions of different signedness: 'u_long' {aka 'long unsigned int'} and 'int'
if (avail == -1)
^~
gio/gsocket.c: In function 'g_socket_send_messages_with_timeout':
gio/gsocket.c:5283:19: warning: comparison of integer expressions of different signedness: 'gint' {aka 'int'} and 'guint' {aka 'unsigned int'}
for (i = 0; i < num_messages; ++i)
^
gio/gsocket.c:5308:76: warning: operand of ?: changes signedness from 'int' to 'gsize' {aka 'long long unsigned int'} due to unsignedness of other operand
result = pollable_result == G_POLLABLE_RETURN_OK ? bytes_written : -1;
^~
gio/win32/gwinhttpfile.c: In function 'g_winhttp_file_query_info':
gio/win32/gwinhttpfile.c:554:13: warning: comparison of integer expressions of different signedness: 'int' and 'size_t' {aka 'long long unsigned int'}
n == wcslen (content_length))
^~
gio/win32/gwin32fsmonitorutils.c: In function 'g_win32_fs_monitor_handle_event':
gio/win32/gwin32fsmonitorutils.c:107:11: warning: comparison of integer expressions of different signedness: 'GFileMonitorEvent' {aka 'enum <anonymous>'} and 'int'
if (fme != -1)
^~
gio/win32/gwinhttpvfs.c: In function 'g_winhttp_vfs_get_file_for_uri':
gio/win32/gwinhttpvfs.c:172:17: warning: comparison of integer expressions of different signedness: 'int' and 'long long unsigned int'
for (i = 0; i < G_N_ELEMENTS (winhttp_uri_schemes); i++)
^
gio/win32/gwinhttpvfs.c: In function 'g_winhttp_vfs_get_supported_uri_schemes':
gio/win32/gwinhttpvfs.c:210:17: warning: comparison of integer expressions of different signedness: 'int' and 'long long unsigned int'
for (i = 0; i < G_N_ELEMENTS (winhttp_uri_schemes); i++)
^
The "recursive:" kwarg is available in the targeted minimum version of
meson, and is basically required if you want to not emit warnings and
maybe error with --fatal-meson-warnings.
There are two basic solutions to this problem:
- The current default behavior is false, so explicitly opt in to that
value. None of these internal libraries use recursive objects anyway.
- Use link_with to link to the static library directly, rather than the
extracted objects.
Option 2 is what used to be done before commit
62af03bda8, but it only works with meson
>=0.52 and previously had buggy behavior.
Since the minimum version of meson is now 0.52, it is safe to revert
that commit and go back to using link_with, and therefore option 2 is
chosen.
Previously, the code validated that child objects have a path with the
object manager strictly as a prefix. That doesn’t work in the case where
the object manager’s path is `/`. This case is not recommended, but is
supported.
If the object manager’s path is `/`, validate that child objects’ paths
are not equal to it. If they are equal to it, warn the user rather than
emitting a critical warning, since we can’t expect any users who’ve not
been compliant with the spec to instantly rework their D-Bus APIs.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2500
Emit this when we're about to spawn or DBus activate a GAppInfo. This
allows lauchers to keep the appinfo associated with a startup id.
We use a GVariant to allow for future exansion of the supplied data.
When using g_desktop_app_info_launch_uris_as_manager the "launched"
signal allows to map a desktop-startup-id to a GAppInfo. Make this
possible for DBus activation too.
Since we don't have a PID there we pass a 0. Update the signal
description accordingly.
These should be implemented by loadable IO module libraries, but are not
callable in GLib itself.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2498
This is a partial revert of commit
f378352051, as the previous commits have
silenced the AddressSanitizer warnings for `GContentType`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2310
The function pointer casts silence the compiler and allow the code to
build (and even run in the typical case). However, when building with
control flow integrity checks, the runtime (rightfully) complains about
calling a function via a mismatched function pointer type.
In order to make xdgmime properly relocatable so that unit tests can use
it without it reading and modifying the user’s actual xdgmime files, and
without the need to call setenv() (and get tied up with thread safety
problems), add a xdg_mime_set_dirs() method to allow the dirs to be
overridden. They will still default to the values of $XDG_DATA_HOME and
$XDG_DATA_DIRS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Allocate an empty cache object, check cache objects for being empty
before using them.
Otherwise the code will re-read cache every 5 seconds, as NULL cache
does not trigger the code that stores mtime, which makes the cache
file appear modified/unloaded permanently.
https://bugzilla.gnome.org/show_bug.cgi?id=735696
Since returning exactly one match has special significance, don't
give up matching before we've found at least 2 types. Also, make
sure that we don't return the same mime type more than once.
Bug 541236.
If an `InterfacesRemoved` signal is received for an object which doesn’t
exist in the local map of interfaces, don’t emit a warning.
This seems to happen in the real world (see #2401). Without a trace of
the D-Bus traffic it’s not possible to know exactly what situation is
causing this, but it seems possible that the peer could disappear and
its `notify::name-owner` signal could be processed before its
`InterfacesRemoved` signal, or something similar.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2401
Relax assertion about opened registry key as it may have been removed
in the meantime between enumeration and when opening, or (more likely)
we may not have the required permissions to open the some enumerated
keys (i.e. RegOpenKeyExW fails and returns ERROR_ACCESS_DENIED).
Fixes https://gitlab.com/inkscape/inbox/-/issues/5669
Instead of calling xterm when it clearly does not exist and causes a silent error,
inform the user that the launch failed so they can take the right action.
Also added (transfer full) or (transfer none) annotations while I was at it.
This is the result of checking each `Returns:` line in these files. I’ve
only considered nullability and transferability, and not other (potentially
missing or incorrect) annotations.
Helps: #2227
If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
Let's explain the advantages of relying on GTlsConnection to perform
certificate verification.
Also, document that the issuer property is a little tricky, because the
issuer certificate might not be the certificate that actually gets used
in final certification path building. This is very unexpected to anybody
who is not an expert.
Because TLS certificate verification is extremely complex, the lookup
issuer function may be tempting to misuse even by experienced
developers. There is a notion that the issuer certificate will always be
used in the final certification path, but it's just not always true.
Trying to make security decisions based on the results of this function is
a trap, so let's document that.
It turns out that old versions of glib-networking actually reordered the
certificate chain to match the final verification path. This no longer
happens since a long time ago, because it was a buggy mess. Instead, we
rely on the TLS library to build the final verification path. Their path
building is not very good, but at least it's consistent. The point of
these doc updates is to clarify that only the TLS library can make
security decisions.
Document that HTTP requests may be performed to look up missing
certificates.
Finally, let's document that certificate verification using GTlsDatabase
cannot be as smart as certificate verification performed directly by
GTlsConnection.
g_win32_package_parser_enum_packages() reads beyond the end of a buffer
when doing a memcpy. With app verifier enabled on Windows, it causes
the application to crash on startup.
This change limits the memcpy to the size of the source string.
Fixes: #2454
This reverts commit 7aa0580cc5.
As stated in #2316, that commit was a workaround to allow gnome-keyring
and msmtp to continue to get their session bus address from
`DBUS_SESSION_BUS_ADDRESS`, even though they’re `AT_SECURE`. The timeout
on that workaround has expired so that commit is now being reverted.
Fixes: #2316
You need to separate the first entry in the list from the preceding
paragraph, and you should add a space before the enumerating symbol.
GTK-Doc accepts a very lax Markdown syntax, but any other tool parsing
our documentation will likely fail.
The value should be initialized to NULL before calling
g_win32_registry_key_get_value_w(), to ensure that cleanup
can be done unconditionally afterward.
To ensure that the watch is properly re-set every time, call
watch_keys() from the watch callback. Previously the watch was only
renewed after a data update was done in a worker thread, which made
no sense, since the update function was implemented in such a way
that it can (and should) be re-triggered on each key change, until
the changes stop coming, and that can only happen if we renew
the registry watcher right away.
If a key watch is renewed from the key watch callback, it results
in the callback being NULL, since we clear it after we call it.
Rearrange the function to make sure that the changes done by the
callback function are preserved properly.
This function can, in fact, return STATUS_SUCCESS. We shouldn't
assert that it doesn't.
For now interpret it just like STATUS_PENDING (i.e. APC will be called),
see how it goes (it isn't documented how the function behaves in this
case, we have to play it by ear).
Note that while we *can* use a better-documented RegNotifyChangeKeyValue() here,
it communicates back to us via event objects, which means that the registry
watcher would have to interact with the main loop directly and insert its
events (plural; one event per key) there. That would make the API more complicated.
Whereas the internal NT function communicates by calling an APC - we're good
as long as something somewhere puts the thread in alertable state.
When attempting to test Windows support for building libadwaita, since we are
using multiple GResource files, one would hit linker errors where multiple
definitions of the following symbols have been defined, when
glib-compile-resources was invoked without manual register:
resource_constructor_wrapper
resource_destructor_constructor
_arrayresource_constructor
_arrayresource_destructor
In order to avoid that, just prefix the definitions of resource_constructor
and resource_destructor, like what we do when --manual-register is used, with
what we pass in with --c-name so that we ensure that we do not end up in such
name collisions.
Port all existing calls in GLib to the new API so that they can receive
more detailed error information (although none of them actually make use
of it at the moment).
This also serves to test the new API better through use.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #203
The `g_file_trash` function fails with the `Unable to find or create trash
directory` error when the global `.Trash` directory exists. This is because
the commit 7f2af262 introduced the `gboolean success` variable to signalize
the detection of the trash folder, but didn't set it in all code branches.
Since for a time this variable was not initialized the bug wasn't visible
when the trash folder existed. The bug became effective after the `success`
variable was initialized with `FALSE` by the commit c983ded0. Let's explicitly
set the `success` variable in all branches to fix the global trash dir
detection.
Fixes: https://gitlab.gnome.org/GNOME/glib/-/issues/2439
The function which calls `SetFileTime()` works with seconds and
nanosecond, but the functions which call it are doing so with seconds
and microseconds.
Fix them so they convert to nanoseconds first.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The code appears to be dealing with time in units of 100ns, not 100µs,
so name the variable accordingly.
The rest of the arithmetic in that function appears consistent and
correct.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The modification time test creates a file, gets the modification time in
seconds, then gets the modification time in microseconds and assumes
that the difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
This is necessary when building glib with icecc. Icecc splits the build
process into two parts. The file is locally preprocessed with
-fdirectives-only to resolve any includes. This adds linemarkers to the
intermediate file. Without the new-line at the end of the file this:
#include "gconstructor_as_data.h"
#include "glib/glib-private.h"
Is turned into this:
const char gconstructor_code[] = "...";# 1 "glib/glib-private.h"
...
The result is a compile error:
In file included from ../glib/gio/glib-compile-resources.c:45:
gio/gconstructor_as_data.h:1: error: stray '#' in program
gio/gconstructor_as_data.h:1: error: expected identifier or '(' before numeric constant
In file included from ../glib/glib/glib-private.h:22,
from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/gwakeup.h:27:1: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:28:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:30:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:32:42: error: unknown type name 'GWakeup'
../glib/glib/gwakeup.h:33:42: error: unknown type name 'GWakeup'
In file included from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/glib-private.h:98:3: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:99:58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h💯58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:102:58: error: unknown type name 'GWakeup'
../glib/glib/glib-private.h:103:58: error: unknown type name 'GWakeup'
In file included from gio/gconstructor_as_data.h:2,
from ../glib/gio/glib-compile-resources.c:45:
../glib/glib/glib-private.h:164:53: warning: file "../glib/gio/glib-compile-resources.c" linemarker ignored due to incorrect nesting
To avoid this, generate gconstructor_as_data.h with a new-line at the end
of the file.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This helps to void deadlocks when two processes call interfaces on each
other one of them being org.freedesktop.DBus.ObjectManager.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
The current code is unsafe to use from multiple threads at once.
GIOStream functions like this are supposed to be semi-threadsafe. It's
allowed for them to be called on both a reader thread and a writer
thread at the same time. Of course, it's still tricky and dangerous,
because it's only *really* threadsafe if the handshake has finished,
and API users have no plausible way to know that because the API
does not require performing an explicit handshake operation. But that's
a glib-networking problem. We can at least avoid the most obvious
threadsafety issue here in the API layer.
Note that we'll need to implement the new vfunc in glib-networking for
this to actually work.
Fixes#2393
The documentation for `g_bus_watch_name()` implies that the
`GDestroyNotify` for the user data will be called in the current thread
default `GMainContext`. Currently, it could be called in any thread, as
`client_unref()` can be called in any thread.
Fix that by deferring it to an idle source if `client_unref()` finalises
the `Client` object in a different thread.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These were missing from the test before the previous commit ported from
`GMainLoop` to `GMainContext`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It makes combination exit conditions a lot easier than when using
`g_main_loop_quit()` from different callbacks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The first sentence incorrectly said that it checked the type of the
value, and then the second sentence explicitly said it was a programmer
error to give a value of the wrong type.
According to the code, the second sentence is correct.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2425
WebKit wants these private key properties to be readable in order to
implement a deserialization function. Currently they are read-only
because at the time GTlsCertificate was originally designed, the plan
was to support PKCS#11-backed private keys: private keys that are stored
on a smartcard, where the private key is completely unreadable. The
design goal was to support both memory-backed and smartcard-backed
private keys with the same GTlsCertificate API, abstracting away the
implementation differences such that code using GTlsCertificate doesn't
need to know the difference.
The original PKCS#11 implementation was never fully baked and at some
point in the past I deleted it all. It has since been replaced with a
new implementation, including a GTlsCertificate:private-key-pkcs11-uri
property, which is readable. So our current API already exposes the
differences between normal private keys and PKCS#11-backed private keys.
The point of making the private-key and private-key-pem properties
write-only was to avoid exposing this difference.
Do we have to make this API function readable? No, because WebKit could
be just as well served if we were to expose serialize and deserialize
functions instead. But WebKit needs to support serializing and
deserializing the non-private portion of GTlsCertificate with older
versions of GLib anyway, so we can do whatever is nicest for GLib. And I
think making this property readable is nicest, since the original design
reason for it to not be readable is now obsolete. The disadvantage to
this approach is that it's now possible for an application to read the
private-key or private-key-pem property, receive NULL, and think "this
certificate must not have a private key," which would be incorrect if
the private-key-pkcs11-uri property is set. That seems like a minor
risk, but it should be documented.
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
Confusingly, g_spawn_check_exit_status() takes a wait status, not an
exit status, so passing g_subprocess_get_exit_status() to it is
incorrect (although both encodings happen to use 0 to encode success
and a nonzero value to encode failure, so in practice this probably
had the desired effect).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Following on from the previous commit, some explicit
`g_main_context_wakeup()` calls were missing from the test code which
only uses `GMainContext`.
Add them, and also add some assertions to check that these functions are
being called in the expected thread (as the code comments say).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a bit of a compromise. Since the option parsing in
`GApplication` is built on `GOptionContext`, there’s no way to
reliably indicate that a given option was passed by the user, other than
by its value changing. If the default value is zero, but the user
explicitly passed zero, nothing changes, so it’s not obvious that the
option was explicitly provided.
When just `GOptionContext` is being used, this is fine, as that’s
obvious what will happen from the way the API is built. With
`GApplication::handle-local-options`, though, the `GVariantDict`
provided by GLib to the callback claims to only contain the values of
the options provided by the user, and no defaults.
It’s not actually possible for GLib to do that reliably.
Previously, GLib was dropping all numeric values which were zero valued
(i.e. the defaults), as they *could* have been the defaults. It seems
like a slightly better behaviour to instead *not* drop those numeric
values, and err on the side of reporting some defaults as user-provided
(even if they weren’t) rather than dropping some user-provided values
which happen to be the defaults.
This adds a test for the case of parsing a double; the cases for
integers are analogous.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2329
The tests in `gdbus-names.c` use a mixture of `GMainLoop` and iterating
a `GMainContext` directly. Some of the helper functions based around the
`OwnNameData` struct use the `loop` `GMainLoop` even when called from
tests like `watch_with_different_context()` which themselves use
`GMainContext` directly.
Thus, it’s possible for the `GMainLoop` to not be running, while the
test is iterating on `g_main_context_iteration()`. In this case,
`g_main_loop_quit()` is a no-op and will not wake up the `GMainContext`.
This causes the test to livelock in around 1 in 1200 test runs.
Fix this by adding an explicit `g_main_context_wakeup()` call after each
`g_main_loop_quit()` call. A more comprehensive fix would be to port all
the tests in this file to iterating `GMainContext` directly, and drop
all the `GMainLoop` usage, but I don’t have time for that right now.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If `g_file_monitor_source_dispatch()` drops the last reference to its
`GLocalFileMonitor`, a deadlock will occur, because disposing the
`GLocalFileMonitor` causes synchronous disposal of the
`GFileMonitorSource`, and hence an attempt to re-lock the already-locked
mutex in the `GFileMonitorSource`.
Fix that by dropping the reference to the `GLocalFileMonitor` after
unlocking.
Diagnosed by Ting-Wei Lan. The bug was originally introduced by me in
commit 592a13b483.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Relax the requirement for the test to only be compiled/run under gcc,
since a version of LLVM was released which supports `--add-symbol`.
`objcopy` should be overrideable to be `llvm-objcopy` by using a machine
file as per https://mesonbuild.com/Machine-files.html#binaries.
Suggested and tested by Grigory Vasilyev.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2423
Clarify that the terms ‘GUID’ and ‘UUID’ are used interchangeably in the
context of D-Bus, and that neither of them are an RFC 4122 UUID.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Update several links to allow the remote to use its configured default
branch name, rather than specifying `master` as the default branch name.
This will help avoid breakage if any of these projects rename their
default branch in the future.
Fix a few of the links where they were hitting redirects or had moved.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2348
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This adds g_tls_connection_get_protocol_version(),
g_tls_connection_get_ciphersuite_name(), and DTLS variants. This will
allow populating TLS connection information in the WebKit web inspector.
This is WIP because we found it's not quite possibly to implement
correctly with GnuTLS. See glib-networking!151.
This is the result of checking each `Returns:` line in these files. I’ve
only considered nullability and not other (potentially missing or
incorrect) annotations.
Including suggestions by Simon McVittie.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2227
In a PKCS#11 operation there are multiple types of PINs possibly
needed and these flags add a way to expose them to the user.
This design exactly matches gnutls' gnutls_pin_flag_t API.
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
The `GApplication` must be registered before calling
`g_application_mark_busy()`. Document that, and add a guard.
The same is true for `g_application_unmark_busy()`, but the existing
documentation and guard for `busy_count > 0` are enough.
For the reasons given in the new bit of documentation, GDBusProxy should
not be used for connecting to stateless D-Bus services which may be
restarted at any point.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1036
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Since commit ab285899a6 ('gdbusconnection: Document main context
iteration for unsubscript'), we document when the user is guaranteed
that all resources are gone after g_dbus_connection_signal_unsubscribe().
This is not merely an implementation detail, it's something that the
user needs to be able to rely on. It is good that this is documented.
However, libnm does something different ([1]). It registers to several D-Bus
signals without providing a GDestroyNotify. After unsubscription, it schedules
another idle action with lower priority and uses that to know when
cleanup is complete. I think this is a useful alternative and should
also be guaranteed and documented to work.
Also note that this isn't just some implementation detail that currently
happens to work. GDBusConnection tightly integrates with GMainContext and it
works by scheduling idle sources with G_PRIORITY_DEFAULT priority. It needs to
schedule all events with this same priority, otherwise the ordering is not
preserved. At this point, with GDBusConnection working this way, this is no longer
something that can reasonably be any different. It's how GDBusConnection fundamentally
works, and a user must be able to rely on that. As such, this new promise isn't
something that we would want to break in the future.
Thus document it.
[1] a55c10c6cb/src/libnm-client-impl/nm-client.c (L7918)
This fixes a bug where the family flag was ignored in lookup_data_new,
causing the resolver to call getaddrinfo with no hints set when clearly
the family hint should have been set.
gio/tests/unix-streams.c: In function ‘test_write_async_wouldblock’:
gio/tests/unix-streams.c:692:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
692 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
gio/tests/unix-streams.c: In function ‘test_writev_async_wouldblock’:
gio/tests/unix-streams.c:780:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
780 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
An application that has been shut down is still marked as registered
even if its implementation has been already destroyed.
This may lead to unguarded crashes when calling functions that have
assumptions for being used with registered applications.
So, when an application is registered, mark it as unregistered just
before destroying its implementation and after being shut down, so that
we follow the registration process in reversed order.
Added tests
gio/tests/socket-common.c: In function ‘socket_address_from_string’:
gio/tests/socket-common.c:50:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
50 | for (i = 0; i < G_N_ELEMENTS (unix_socket_address_types); i++)
| ^
gio/tests/gnotification-server.c: In function ‘g_notification_server_bus_acquired’:
gio/tests/gnotification-server.c:224:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
224 | };
| ^
gio/tests/gdbus-proxy.c: In function ‘strv_equal’:
gio/tests/gdbus-proxy.c:158:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
158 | res = g_strv_length (strv) == count;
| ^~
gio/gkeyfilesettingsbackend.c: In function ‘convert_path’:
gio/gkeyfilesettingsbackend.c:155:15: warning: comparison of integer
expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’}
and ‘gint’ {aka ‘int’}
155 | if (key_len < kfsb->prefix_len ||
| ^
gio/tests/gsettings.c: In function ‘strv_set_equal’:
gio/tests/gsettings.c:2268:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
2268 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/gdbus-testserver.c:806:1: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
806 | };
| ^
In file included from gio/gio.h:53,
from gio/tests/gdbus-testserver.c:1:
gdbusconnection.h:395:12: note: ‘padding’ declared here
395 | gpointer padding[8];
| ^~~~~~~
gio/tests/gdbus-testserver.c: In function ‘handle_method_call’:
gio/tests/gdbus-testserver.c:334:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
334 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:343:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
343 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:352:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
352 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:361:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
361 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:370:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
370 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:379:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
379 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:388:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
388 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:397:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
397 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:406:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
406 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/mimeapps.c: In function ‘strv_equal’:
gio/tests/mimeapps.c:31:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
31 | res = g_strv_length (strv) == count;
| ^~
gio/tests/proxy-test.c: In function ‘do_echo_test’:
gio/tests/proxy-test.c:855:25: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘gsize’ {aka ‘long unsigned int’}
855 | for (total = 0; total < nwrote; total += nread)
| ^
gio/tests/file.c: In function ‘written_cb’:
gio/tests/file.c:358:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘size_t’ {aka ‘long unsigned int’}
358 | if (data->pos < strlen (data->data))
| ^
gio/tests/gdbus-test-codegen.c: In function ‘check_object_manager’:
gio/tests/gdbus-test-codegen.c:2344:20: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
2344 | if (om_signal_id != -1)
| ^~
gio/tests/testfilemonitor.c: In function ‘check_expected_events’:
gio/tests/testfilemonitor.c:124:39: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
124 | for (i = 0, li = 0, l = recorded; i < n_expected && l != NULL;)
| ^
gio/tests/socket.c: In function ‘test_get_available’:
gio/tests/socket.c:1696:53: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘long unsigned int’
1696 | if (g_socket_get_available_bytes (server) > sizeof (data))
| ^
gio/tests/gdbus-export.c:130:1: error: missing initializer for field ‘properties’ of ‘GDBusInterfaceInfo’ {aka ‘const struct _GDBusInterfaceInfo’}
130 | };
| ^
In file included from gio/gio.h:57,
from gio/tests/gdbus-export.c:21:
gio/gdbusintrospection.h:156:25: note: ‘properties’ declared here
156 | GDBusPropertyInfo **properties;
| ^~~~~~~~~~
...
However, GLib still can’t guarantee to do rate limiting, as the type of
rate limiting which is appropriate depends on what tasks are being run,
and the GTask thread pool is shared between all tasks (of many different
types) in a process space.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2368
gio/tests/actions.c: In function ‘strv_set_equal’:
gio/tests/actions.c:177:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
177 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/actions.c: In function ‘test_parse_detailed’:
gio/tests/actions.c:473:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
473 | for (i = 0; i < G_N_ELEMENTS (testcases); i++)
| ^
gio/tests/actions.c: In function ‘test_entries’:
gio/tests/actions.c:375:5: error: missing initializer for field ‘parameter_type’ of ‘GActionEntry’ {aka ‘const struct _GActionEntry’}
375 | { "foo", activate_foo },
| ^
In file included from gio/gio.h:31,
from gio/tests/actions.c:1:
gio/gactionmap.h:63:16: note: ‘parameter_type’ declared here
63 | const gchar *parameter_type;
| ^~~~~~~~~~~~~~
...
gio/tests/gdbus-peer-object-manager.c: In function ‘mock_interface_get_vtable’:
gio/tests/gdbus-peer-object-manager.c:111:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘struct _GDBusInterfaceVTable’}
111 | };
| ^
gio/tests/network-address.c: In function ‘main’:
gio/tests/network-address.c:1194:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1194 | for (i = 0; i < G_N_ELEMENTS (host_tests); i++)
| ^
gio/tests/network-address.c:1201:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1201 | for (i = 0; i < G_N_ELEMENTS (uri_tests); i++)
| ^
gio/tests/network-address.c:1208:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1208 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/network-address.c:1215:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1215 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/gsubprocess.c: In function ‘test_communicate_async’:
gio/tests/gsubprocess.c:774:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
774 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async’:
gio/tests/gsubprocess.c:1025:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1025 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_cancelled_async’:
gio/tests/gsubprocess.c:1058:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1058 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async_invalid’:
gio/tests/gsubprocess.c:1202:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1202 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/converter-stream.c: In function ‘g_expander_converter_convert’:
gio/tests/converter-stream.c:128:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
128 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c: In function ‘g_compressor_converter_convert’:
gio/tests/converter-stream.c:234:23: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
234 | if (in_end - in < block_size)
| ^
gio/tests/converter-stream.c:244:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
244 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c:257:33: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
257 | if (v == 0 && in_end - in == block_size && (flags & G_CONVERTER_INPUT_AT_END) == 0)
| ^~
gio/tests/converter-stream.c: In function ‘test_expander’:
gio/tests/converter-stream.c:356:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
356 | for (i = 0; i < sizeof(unexpanded_data); i++)
| ^
gio/tests/converter-stream.c: In function ‘test_compressor’:
gio/tests/converter-stream.c:445:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
445 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:454:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
454 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘test_converter_pollable’:
gio/tests/converter-stream.c:1077:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1077 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:1086:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1086 | g_assert (i == expanded_size -1);
| ^~
The code did not handle EOF (0 byte read) correctly. This can e.g. cause
an infinite loop if an incorrect socks proxy is configured.
Add the appropriate checks and return an G_IO_ERROR_CONNECTION_CLOSED
error if EOF is encountered.
gio/tests/converter-stream.c: In function ‘main’:
gio/tests/converter-stream.c:1220:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1220 | for (i = 0; i < G_N_ELEMENTS (compressor_tests); i++)
| ^
gio/tests/converter-stream.c:1223:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1223 | for (i = 0; i < G_N_ELEMENTS (truncation_tests); i++)
| ^
gio/tests/converter-stream.c:1226:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1226 | for (i = 0; i < G_N_ELEMENTS (charset_tests); i++)
| ^
gio/tests/contenttype.c: In function ‘test_tree’:
gio/tests/contenttype.c:337:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
337 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
gio/tests/contexts.c: In function ‘test_context_specific_emit’:
gio/tests/contexts.c:379:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint32’ {aka ‘int’}
379 | for (i = 0; i < g_test_rand_int_range (1, 5); i++)
| ^
gio/tests/contexts.c:383:55: error: comparison of integer expressions of different signedness: ‘int’ and ‘guint’ {aka ‘unsigned int’}
383 | while (g_atomic_int_get (&observed_values[i]) != n)
| ^~
gio/tests/contexts.c:387:41: error: comparison of integer expressions of different signedness: ‘gint64’ {aka ‘long int’} and ‘guint64’ {aka ‘long unsigned int’}
387 | if (g_get_monotonic_time () > expiry)
| ^
gio/gsettings-tool.c: In function ‘gsettings_list_children’:
gio/gsettings-tool.c:199:30: error: comparison of integer expressions of different signedness: ‘size_t’ {aka ‘long unsigned int’} and ‘gint’ {aka ‘int’}
199 | if (strlen (children[i]) > max)
| ^
gio/gunixsocketaddress.c: In function ‘g_unix_socket_address_to_native’:
gio/gunixsocketaddress.c:217:15: error: comparison of integer expressions of different signedness: ‘gsize’ {aka ‘long unsigned int’} and ‘gssize’ {aka ‘long int’}
217 | if (destlen < socklen)
| ^
If this g_return_val_if_fail() is ever hit, then we leak arguments.
This is not very important because if your code hits
g_return_val_if_fail() you are invoking undefined behavior, a rather
more serious problem, but let's replace it with g_critical() to be
robust.
This includes a small behavior change: it returns 1 rather than 0 in
this error case.
Found by Coverity.
This function can cause significant delays when the mounted volume
is disconnected or just weird. Use IExtractIconW::GetIconLocation()
instead.
Theoretically, this should require COM to be initialized, but in my tests
this code worked just fine without calling CoInitializeEx().
On Windows gio runs a thread to update appinfo at startup.
If someone unloads gio (this happens when a dynamic gio module gets
unloaded by a program that doesn't use gio itself), there doesn't seem
to be a way to detect that until gio is already gone, and as soon as
gio is gone, the thread crashes, since it tries to execute instructions
that are no longer there.
Holding an extra reference to gio DLL fixes this, but it also prevents
gio from being unloaded, and there's no "weak references" for DLLs.
So we just pin gio and acknowledge that it will never be unloaded.
Fixes#2300Fixes#2359
1) Check that schedule_call_in_idle code branch of gdbusnamewatching.c
is working to call vanished handler in the thread which had watched the name
2) Check cancellation of vanished handler if the name is unwatched before
vanished callback is dispatched.
Closes#2011
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
After the recent reworking of this code it was possible for `g_close()`
to be called on `fd == -1`, which is invalid. It would have reported an
error, were errors not ignored. So it was harmless, but still best to
fix.
Simplify the error handling by combining both error labels and checking
the state of `fd` dynamically.
Coverity CID: #1450834
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The variable `gconstructor_code` (which is what’s defined by
`gconstructor_as_data_h`) is not used at all inside
`glib-compile-schemas`.
This looks like a copy/paste error from the build definition for
`glib-compile-resources` below, which does need it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
In the 2.68 cycle we’d added 3 new enumerator elements. Due to the
preceding commit, they can now be annotated with
`GLIB_AVAILABLE_ENUMERATOR_IN_2_68`, which will make it a bit easier for
third party projects to notice when they’re using these symbols without
having bumped their GLib dependency.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2327
`""` is not a valid path (`stat()` on it returns `ENOENT`). Previously,
a full `GLocalFile` was being created, which ended up resolving to
`$CWD`, through path canonicalisation. That isn’t right.
Fix it by creating a `GDummyFile` instead, and adding a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2328
Calling `dlopen()` with `libutil.so` makes the installed tests depend on
having glibc's development files installed. To avoid this, we can work
out the runtime library name at build time and `dlopen` that instead.
This approach is [taken from libfprint][1], thanks to Marco Trevisan.
[1]: f401f399a8
`ENXIO` can be returned from `open(2)` for special files (FIFOs, device
files and domain sockets) which are not backed by anything.
This fixes the error returned by `g_file_replace()` when trying to
replace such a file, so that it now matches the documentation.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These test all the functionality and combinations of flags I can think
of. They do not cover dynamic behaviour (for example, what would happen
if the source file is deleted by another process part-way through a call
to `g_file_replace()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `G_FILE_CREATE_REPLACE_DESTINATION` flag is equivalent to unlinking
the destination file and re-creating it from scratch. That did
previously work, but in the process the code would call `open(O_CREAT)`
on the file. If the file was a dangling symlink, this would create the
destination file (empty). That’s not an intended side-effect, and has
security implications if the symlink is controlled by a lower-privileged
process.
Fix that by not opening the destination file if it’s a symlink, and
adjusting the rest of the code to cope with
- the fact that `fd == -1` is not an error iff `is_symlink` is true,
- and that `original_stat` will contain the `lstat()` results for the
symlink now, rather than the `stat()` results for its target (again,
iff `is_symlink` is true).
This means that the target of the dangling symlink is no longer created,
which was the bug. The symlink itself continues to be replaced (as
before) with the new file — this is the intended behaviour of
`g_file_replace()`.
The behaviour for non-symlink cases, or cases where the symlink was not
dangling, should be unchanged.
Includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2325
Since a following commit is going to add a new test which references
Gitlab, so it’s best to move the URI bases inside the test cases.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When GLib code is checked out with Windows line endings (happens on Windows),
data-to-c.py embedded that line endings into generated string literal. And
then they translated to double newlines in glib-compile-resources output.
clang-cl failed to compile such files because of empty lines in the middle of
multiline macros:
#define G_MSVC_CTOR(_func,_sym_prefix) \
static void _func(void); \
To fix the issue, enable 'universal newlines' mode when reading the input in
data-to-c.py - translate both '\n' and '\r\n' to '\n'.
Fixes https://gitlab.gnome.org/GNOME/glib/-/issues/2340
This will require distributions to ensure they pass
`--localstatedir=/var` correctly to Meson, but they should be doing that
already.
See https://mesonbuild.com/Builtin-options.html#directories for details
about how Meson treats `localstatedir` differently from most other `dir`
variables.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It’s unlikely that the machine ID will be invalid (it’s system
configuration), but it would be helpful to not propagate invalid IDs
further, since a lot of things rely on it.
It’s not easy to test this (it requires factoring out the code so it can
be used from a test program, or allowing it to load a machine ID from a
custom path), so I haven’t added unit tests. I’ve tested manually by
overriding the loaded machine ID.
Coverity CID: #1430944
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For non-Linux UNIX systems, the label 'close_libutil:' in
'test_pollable_unix_pty()' will have no statement that goes with that
label. Just do a 'return' on non-Linux UNIX systems.
