This may have been causing an intermittent failure of the pollable test
on BSD, where updating the readable status of a socket takes a bit
longer than on Linux.
```
GLib-GIO-DEBUG: 16:06:41.235: GSocketClient: Starting application layer connection
GLib-GIO-DEBUG: 16:06:41.235: GSocketClient: Connection successful!
Bail out! GLib-GIO:ERROR:../gio/tests/pollable.c:73:check_source_readability_callback: assertion failed (readable == expected): (0 == 1)
```
I have not debugged the test on BSD, though, so this is only a guess.
See https://gitlab.gnome.org/GNOME/glib/-/jobs/2022087
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This should make each unit test a bit more self-contained and easier to
verify that they’re independent.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This test is opportunistic in that it’s not possible to detect whether
the race condition has been hit (other than by hitting a deadlock).
So the only approach we can take for testing is to loop over the code
which has previously been known to cause a deadlock a number of times.
The number of repetitions is chosen from running the test with the
deadlock fix reverted.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1941
Add SPDX license (but not copyright) headers to all files which follow a
certain pattern in their existing non-machine-readable header comment.
This commit was entirely generated using the command:
```
git ls-files gio/tests/*.c | xargs perl -0777 -pi -e 's/\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/\n \*\n \* SPDX-License-Identifier: LGPL-2.1-or-later\n \*\n \* This library is free software; you can redistribute it and\/or\n \* modify it under the terms of the GNU Lesser General Public/igs'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1415
The raw value is escaped according to D-Bus rules. This is probablematic
for Windows backslashed paths. We can use URI unescaping, it seems
that's what gdbusaddress.c is doing too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The "/unix-fd/scm" test is quite Unix-specific, the next patch is going
to add a portable test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Use a prefix matching the binary, rename the test "scm", as it involves
SocketControlMessage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
It is not only shorter than `not meson.is_cross_build() or
meson.has_exe_wrapper()` but also handle the case of cross compiling to
a compatible arch such as building for i386 on an amd64.
This fixes a scan-build warning:
```
../../../../source/glib/gio/tests/gdbus-tests.c:146:3: warning: Value stored to 'watch_id' is never read [deadcode.DeadStores]
watch_id = 0;
^
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1767
When I enabled unix socketpair test on win32, I left the existing
g_close(fds[1]), but _g_win32_socketpair() returns native sockets
descriptors that must be closed with closesocket() on win32.
Let GSocket handle the socket pair cleanup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When checking that the connection has the expected number of refs, the
test would block on a `GMainContext` iteration for up to 3s before
waking up and failing (if the refcount was still not as expected).
This check was written in the expectation that changing the refcount of
the connection would only happen due to dispatching a source on
`GMainContext` — hence the `GMainContext` would wake up as the refcount
changed.
That’s probably not actually true though. It might be the case that the
connection’s refcount is changed on from the GDBus worker thread, which
would not cause any wakeups on the main thread’s `GMainContext`.
In this case, the `GMainContext` iteration in
`assert_connection_has_one_ref()` would block for the full 3s, and then
wake up and notice the refcount is correct (then the test would
proceed).
That’s fine, apart from the fact that `test_threaded_singleton()` does
this 1000 times. If the slow case is hit on a significant number of
those test runs, the test will take around 3000s to complete, which is
significantly more than meson’s test timeout of 360s. So the test fails
with something like:
```
220/266 glib:gio+slow / gdbus-threading TIMEOUT 360.07 s
--- command ---
G_TEST_SRCDIR='/builds/GNOME/glib/gio/tests' GIO_MODULE_DIR='' G_TEST_BUILDDIR='/builds/GNOME/glib/_build/gio/tests' /builds/GNOME/glib/_build/gio/tests/gdbus-threading
--- stdout ---
\# random seed: R02S83fe8de22db4d4f376e6d179e2bdd601
1..3
\# Start of gdbus tests
ok 1 /gdbus/delivery-in-thread
ok 2 /gdbus/method-calls-in-thread
\# GLib-GIO-DEBUG: refcount of 0x5602de913660 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913660 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913c60 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913c60 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913260 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
\# GLib-GIO-DEBUG: refcount of 0x5602de913260 is not right (3 rather than 1) in test_threaded_singleton(), sleeping
```
From this log, it can be seen that the sleep is happening on a different
`GMainContext` every other time, so the test *is* making progress.
Assuming this is a correct diagnosis (it’s a lot of guessing), this
commit tries to fix the test by adding a wakeup timeout to the
`GMainContext` in `assert_connection_has_one_ref()`, which will wake it
up every 50ms to re-check the exit condition.
This polling approach has been taken because it doesn’t seem feasible to
make sure that every `g_object_ref()`/`g_object_unref()` call on a
`GDBusConnection` causes the main context to wake up.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This might fix a recent test failure:
https://gitlab.gnome.org/GNOME/glib/-/jobs/1929015. Unfortunately
there’s not much debug information in the logs to go on, and I can’t
reproduce it locally. All I have is:
```
192/272 glib:gio / gdbus-peer-object-manager FAIL 0.43 s (killed by signal 11 SIGSEGV)
--- command ---
GIO_MODULE_DIR='' G_TEST_BUILDDIR='/builds/GNOME/glib/_build/gio/tests' G_TEST_SRCDIR='/builds/GNOME/glib/gio/tests' /builds/GNOME/glib/_build/gio/tests/gdbus-peer-object-manager
--- stdout ---
\# random seed: R02Seee9b7325ecd7c19249a3412397aed9b
1..2
\# Start of gdbus tests
\# Start of peer-object-manager tests
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
While the assertion always turned out to be true on Linux, it frequently
caused spurious test failures on FreeBSD.
After some remote debugging, I *think* the cause is as written up in the
comment in the code in this commit. However, I cannot be certain, as the
more debugging messages I added, the harder the failure was to
reproduce; and I don’t have access to a FreeBSD machine.
This fixes failures like:
```
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1043:test_converter_pollable: assertion failed (error == NULL): Resource temporarily unavailable (g-io-error-quark, 27)
```
It’s succeeded 1000 times in a row on the FreeBSD CI now; previously
it was failing one time in three:
https://gitlab.gnome.org/GNOME/glib/-/jobs/1936395.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
There’s (deliberately) a bit of race in implementing/handling
`CloseBeforeReturning()` in `gdbus-method-invocation.c`. If the server
closes the D-Bus connection early, the client may exit with `SIGTERM` if
`GDBusConnection:exit-on-close` is set. We don’t want that, as the test
is trying to check that the default handling of a D-Bus method return
after a connection has closed works.
See https://gnome.pages.gitlab.gnome.org/-/glib/-/jobs/1935191/artifacts/_build/meson-logs/testlog.txt
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
G_GNUC_UNUSED does perfectly its job with gcc compiler but the warning
still remains with msvc compiler.
Once the unused variable removed, the finalize vfunc can be removed as
it's doing the same job as the parent function.
Success and failure tests. This massively increases test coverage for
parsing DNS records, although it doesn’t get it to 100%.
It should now be useful enough to do more fuzzing on, without
immediately getting trivial failures from the fuzzer.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Otherwise the code isn’t forwards-compatible, and may be DOSed by
servers returning unknown records, if `G_DEBUG=fatal-warnings` is
enabled for some reason.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Split out from https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2134
by Philip Withnall so it can be used in advance of HTTPS DNS record
support landing.
Reworked to no longer use test fixtures, as it’s simple enough to build
the response header in each test.
The tests are built on Unix only, as they test the parsing code in
`g_resolver_records_from_res_query()`, which is Unix-specific. The
Windows DNS APIs provide much more structured results which don’t need
parsing.
The SONAME of libutil varies between architectures, so the logic to find
the SONAME of libutil was only correct for native builds (Linux on
Linux), not for cross-builds. The regular expression was also not
sufficiently broad to match the SONAME used on the alpha architecture,
which is apparently libutil.so.1.1.
Instead of screen-scraping the output of ldconfig and using that to
dlopen the library that contains openpty, it seems more reliable to
emit a link-time reference to openpty and let the linker do its job.
It's also less code.
Bug-Debian: https://bugs.debian.org/1007946
Signed-off-by: Simon McVittie <smcv@collabora.com>
These should cover everything to do with returning a value or error from
a `GDBusMethodInvocation` object.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The public `g_strv_contains()` API didn’t exist at the time this code
was originally written. Now, happily, it does.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When the test has finished writing all the expanded content into the
socket, explicitly close the output stream, which should make the input
stream readable and non-blocking.
The code intended to do this before, but only as a side-effect of
dropping its last reference to `right`. If another reference was being
held to `right` somewhere else, it wouldn’t end up being closed, which
would lead to failures like
https://gitlab.gnome.org/GNOME/glib/-/jobs/1890000:
```
(/var/tmp/gitlab_runner/builds/Ff4WDDRj/0/GNOME/glib/_build/gio/tests/converter-stream:56570): GLib-GIO-DEBUG: 12:56:23.280: GSocketClient: Connection successful!
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1042:test_converter_pollable: assertion failed (error == NULL): Resource temporarily unavailable (g-io-error-quark, 27)
stderr:
```
This is a bit of a guess (I’m not sure it’ll fix the intermittent test
error, as I haven’t been able to reproduce that locally), but it’s worth
a try.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When multiple tests were run in parallel, this would race on its access
to `~/.dbus-keyrings` to authenticate with the D-Bus server, since the
keyring directory was not appropriately sandboxed to the unit test.
Use `G_TEST_OPTION_ISOLATE_DIRS` to automatically isolate each unit
test’s directory usage.
This should hopefully fix the failure seen in
https://gitlab.gnome.org/GNOME/glib/-/jobs/1849524, where the following
was in the log for a test executed in parallel:
```
GDBus-DBUS_COOKIE_SHA1: Deleted stale lock file '/home/user/.dbus-keyrings/org_gtk_gdbus_general.lock'
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
When multiple tests were run in parallel, this would race on its access
to `~/.dbus-keyrings` to authenticate with the D-Bus server, since the
keyring directory was not appropriately sandboxed to the unit test.
Use `G_TEST_OPTION_ISOLATE_DIRS` to automatically isolate each unit
test’s directory usage.
This should hopefully fix the failure seen in
https://gitlab.gnome.org/pwithnall/glib/-/jobs/1879558.
```
228/266 glib:gio / gdbus-non-socket FAIL 8.64 s (killed by signal 6 SIGABRT)
…
--- stderr ---
GDBus-DBUS_COOKIE_SHA1: Deleted stale lock file '/home/user/.dbus-keyrings/org_gtk_gdbus_general.lock'
**
GLib-GIO:ERROR:../gio/tests/gdbus-non-socket.c:253:test_non_socket: assertion failed (error == NULL): Exhausted all available authentication mechanisms (tried: EXTERNAL, DBUS_COOKIE_SHA1) (available: EXTERNAL, DBUS_COOKIE_SHA1) (g-io-error-quark, 0)
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
If the whole set of tests takes more than 5 seconds, the failure timeout
from the first test could still trigger, causing an incorrect failure.
Ensure the timeout is removed at the end of each test.i
This will hopefully fix the CI failure seen here:
https://gitlab.gnome.org/pwithnall/glib/-/jobs/1879558.
```
204/266 glib:gio / gdbus-auth FAIL 9.21 s (killed by signal 5 SIGTRAP)
…
ok 1 /gdbus/auth/client/EXTERNAL
Bail out! GLib-GIO-FATAL-ERROR: Timeout waiting for client
```
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Now that the leaks are fixed, this test can be run under the sanitizer
again.
This is a partial revert of commit
f378352051.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2312
When destroying `GDBusProxy`s in a custom `GMainContext`, the context
must be iterated enough after finalisation of the proxies that any
pending D-Bus traffic, and the signal subscription data, can be freed.
See the documentation for `g_dbus_connection_signal_unsubscribe()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2312
The `ay` property has type `string` (see the generated code) since it’s
not been annotated to force accepting a `GVariant`.
This means the GObject property machinery expects a string, and calls
`g_strdup()` on the passed-in pointer, rather than sinking the
`GVariant`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2312
It periodically hangs due to the `GDBusConnection` having more than 1
ref (and never losing them), so there’s potentially a leaking ref
somewhere:
```
(/builds/alexander.klauer/glib/_build/gio/tests/gdbus-threading:17767): GLib-GIO-DEBUG: 13:18:12.268: refcount of 0x55fe85b1a260 is not right, sleeping
\# GLib-GIO-DEBUG: refcount of 0x55fe85b1a260 is not right, sleeping
```
Add some more debug output to try and track the problem down.
See: https://gitlab.gnome.org/alexander.klauer/glib/-/jobs/1865968
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It’s periodically failing on FreeBSD and I can’t reproduce the failure
locally nor work out what it is from the logs:
```
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1041:test_converter_pollable: assertion failed (res != -1): (-1 != -1)
stderr:
**
GLib-GIO:ERROR:../gio/tests/converter-stream.c:1041:test_converter_pollable: assertion failed (res != -1): (-1 != -1)
```
Add some more debug output to get the value of `error`, in the hope that
will provide some insight.
See: https://gitlab.gnome.org/GNOME/glib/-/jobs/1866486
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Commit 13c4b9579b seems to have fixed
`network-address` so that it’s reliable everywhere, including on macOS.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1392
This reverts commit 1ed67a9c44.
It turns out that including options, with their default values, in the
`handle-local-options` signal, which weren’t set on the command line,
breaks some applications.
In particular, it breaks Inkscape, which is the application this commit
was originally meant to fix (a different problem).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2611
Breaks: #2329
See: !1953
`mock-resolver.c` is a mock implementation of `GResolver` used in the
`network-address` tests. It returns resolver results, and implements
timeouts, as directed by the test calling it.
In particular, it allows the IPv4 and IPv6 resolver results to be
returned using independent delays. This allows code paths which deal
with IPv4 and IPv6 results being returned at different times to be
tested, as the ‘Happy Eyeballs’ spec mandates various hard-coded
timeouts for returning the best results it can in a reasonable
timeframe.
Previously, `mock-resolver.c` implemented the timeouts by handling
`lookup_by_name()` in a `GTask` worker thread, and calling `g_usleep()`
for the timeout. This seemed to cause occasional CI failures, such as
https://gitlab.gnome.org/GNOME/glib/-/jobs/1843454, where a resolver
error would be returned rather than the expected results:
```
ok 52 /network-address/happy-eyeballs/ipv4-error-ipv6-first
\# GLib-GIO-DEBUG: IPv4 DNS error: IPv4 Broken
(/var/tmp/gitlab_runner/builds/Ff4WDDRj/0/GNOME/glib/_build/gio/tests/network-address:18428): GLib-GIO-DEBUG: 09:03:08.587: IPv4 DNS error: IPv4 Broken
Bail out! GLib-GIO:ERROR:../gio/tests/network-address.c:586:got_addr: assertion failed (error == NULL): IPv4 Broken (g-io-error-quark, 24)
stderr:
**
GLib-GIO:ERROR:../gio/tests/network-address.c:586:got_addr: assertion failed (error == NULL): IPv4 Broken (g-io-error-quark, 24)
```
While I’ve been unable to reproduce these failures locally, I suspect
they might be down to thread spawning occasionally taking long enough on
a CI runner to change the ordering of the timeouts, such that the ‘Happy
Eyeballs’ algorithm returns a different set of results from what the
test expects.
So, this commit rewrites part of `mock-resolver.c` to implement timeouts
in the main thread, rather than in a worker thread. That should
eliminate the delays in spawning threads, and should mean that the
timeout sources in `mock-resolver.c` are attached to the same
`GMainContext` as those from the ‘Happy Eyeballs’ algorithm which are
monitoring them, so a total order over the timeouts can be guaranteed.
Of course, I might be completely wrong since this is just a guess and I
can’t properly test it since I can’t reproduce the failure. Worth a try.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The test results weren’t being freed.
This makes the `network-address` test clean under memcheck for me.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Test failures were previously ignored on macOS because there are 12
tests which consistently fail (and have not yet been fixed, because
there are no regularly active macOS maintainers for GLib; you could help
here!).
However, this means that new test failures can’t be spotted.
So, explicitly mark those 12 tests as `should_fail` on macOS, and then
make other test failures cause failure of the CI run.
We can track the process of fixing those 12 tests on #1392 and #1251.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1392
As they use `g_test_dbus_*()`, they depend on dbus-daemon, so move them
to the part of the Meson file which lists those tests.
This disables them running on platforms which don’t have `dbus-daemon`
available. Arguably, this should be done by returning an error from
`g_test_dbus_up()` and then calling `g_test_skip()`, so the test is
correctly recorded as having been skipped. But that’s a fix for another
time.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Having compared the debug output, it doesn’t show anything unusual
happening that can’t already be seen from other output, for this test.
This is a partial revert of 8fd71dccc5. The debugging output it added to
other tests may still be useful.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1929
As with the previous commit, this isn’t needed for GLib’s tests to work
correctly, but is probably needed in other projects which might be
tempted to copy and paste the Meson tooling from GLib.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4330
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This isn’t needed to make the tests any better (it doesn’t really affect
them), but is probably needed for anyone who copies this Meson code in
order to add `glib-compile-resources` support to their project. It’s
pretty unlikely that someone would want to compile *and export* a
resource from a shared library.
Inspired by https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4334
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Credentials are often used to check peer processes details.
With AF_UNIX sockets on Windows, SIO_AF_UNIX_GETPEERPID can
be used to retrive the peer PID.
We will probably introduce more advanced mechanisms later on, though,
but I am not a Windows API expert.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Glib cannot be built statically on Windows because glib, gobject and gio
modules need to perform specific initialization when DLL are loaded and
cleanup when unloaded. Those initializations and cleanups are performed
using the DllMain function which is not called with static builds.
Issue is known for a while and solutions were already proposed but never
merged (see: https://gitlab.gnome.org/GNOME/glib/-/issues/692). Last
patch is from version 2.36.x and since then the
"constructor/destructor" mechanism has been implemented and used in
other part of the system.
This patch takes back the old idea and updates it to the last version of
glib to allow static compilation on Windows.
WARNING: because DllMain doesn't exist anymore in static compilation
mode, there is no easy way of knowing when a Windows thread finishes.
This patch implements a workaround for glib threads created by calling
g_thread_new(), so all glib threads created through glib API will behave
exactly the same way in static and dynamic compilation modes.
Unfortunately, Windows threads created by using CreateThread() or
_beginthread/ex() will not work with glib TLS functions. If users need
absolutely to use a thread NOT created with glib API under Windows and
in static compilation mode, they should not use glib functions within
their thread or they may encounter memory leaks when the thread finishes.
This should not be an issue as users should use exclusively the glib API
to manipulate threads in order to be cross-platform compatible and this
would be very unlikely and cumbersome that they may mix up Windows native
threads API with glib one.
Closes#692
This commit puts an additional underscore before the external symbol
`_g_binary_test1_resource_data` when using gcc for Windows, to match
the compiler's expectation.
Fixes#2571
Signed-off-by: Ralf Habacker <ralf.habacker@freenet.de>
This tests for #2503. It's fragile, but there is no non-fragile way to
test this. If the test breaks in the future, it will pass without
successfully testing the bug, not fail spuriously, so I think this is
OK.
We should run test_pass_fd twice, once using gspawn's fork/exec codepath
and once attempting to use its posix_spawn() codepath. There's no
guarantee we'll actually get the posix_spawn() codepath, but it works
for now on Linux.
For good measure, run it a third time with no flags at all.
This causes the test to fail if I separately break the fd remapping
implementation. Without this, we fail to test fd remapping on the
posix_spawn() codepath.
Specs say that on Unix id should be desktop file id from the xdg menu
specification, however, currently code just uses basename of .desktop file.
Fix that by finding the .desktop file in all the desktop_file_dirs and use
basename only as a fallback.
See https://specifications.freedesktop.org/menu-spec/latest/go01.html#term-desktop-file-id
and https://specifications.freedesktop.org/desktop-entry-spec/latest/ar01s02.html#desktop-file-id
"To determine the ID of a desktop file, make its full path relative to the
$XDG_DATA_DIRS component in which the desktop file is installed, remove the
"applications/" prefix, and turn '/' into '-'."
Also, add unit test that verifies Desktop Id is being correctly set
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
meson in git master now warns about a missing `check:` kwarg, and may
eventually change the default from false to true.
Take the opportunity to require `objcopy --help` to succeed -- it is
unlikely to fail, but if it does something insane happened.
The code in `g_dbus_message_new_from_blob()` has now been fixed to
correctly error out on all truncated messages, so there’s no need for an
arbitrary programmer error if the input is too short to contain a valid
D-Bus message header.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2528
Rather than waiting for a fixed period of time, poll in a loop until the
condition the test is expecting is true.
A better solution would be to use a `GSource` and wait until that’s
dispatched. But doing so might affect the behaviour of the
`GInputStream` under test, so busy-wait instead.
Fixes this CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/1630758
```
(some socket debug output)
Bail out! GLib-GIO:ERROR:../gio/tests/converter-stream.c:1037:test_converter_pollable: assertion failed (res == -1): (1 == -1)
```
I could not reproduce the failure remotely with a few hundred
invocations of the test, so it might only present itself on BSD, which
presumably has different socket timing behaviour from Linux.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/gio-du.c: In function 'main':
gio/tests/gio-du.c:74:11: error: parameter 'argc' set but not used
74 | main (int argc, char **argv)
| ~~~~^~~~
This was previously done (by commit 63038d1e4c) in one of the cases
where `kill_test_service()` was called — but not the other.
This meant that one instance of `gdbus-testserver` could still be
around when (as it happens, due to the order of the tests) the
`/gdbus/proxy/no-match-rule` test was run. It would start a second
instance of `gdbus-testserver`, which would exit early due to the test
name still being owned on the bus. The first (killed) instance of
`gdbus-testserver` would then exit, leaving no test servers running, and
hence the new test would fail.
This was being seen as frequent CI failures, particularly on FreeBSD
(must have slightly different timing for process signalling and
termination from Linux).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These are known leaks, as they were being done in tests which were
checking precondition failures.
However, since we know what happens when the failures occur, we can
still free the input data reliably, so do that.
This improves the valgrind output for `actions` to show zero definite
leaks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `actions` test previously waited an arbitrary 100ms for various
D-Bus messages to be sent/received, before checking the results of those
messages.
Normally, this would work, but on heavily loaded CI systems, it would
sometimes fail. For example,
https://gitlab.gnome.org/GNOME/glib/-/jobs/1611701.
Fix that by waiting for the condition being checked to evaluate to true,
rather than waiting an arbitrary period of time. On faster machines,
this will speed the tests up too.
Assume that the global default `GMainContext` is in use, so a
`GMainContext*` pointer doesn’t have to be passed around.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
D-Bus has an upper limit on number of Match rules and it's rather easy to hit
with a big number of proxies with signal subscriptions. This happens with
NetworkManager with hundreds of devices or connection settings. By passing
G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE to g_dbus_connection_signal_subscribe(), the
user can call AddMatch with a less granular match instead of a match per every
proxy.
Tests subsequently added by Philip Withnall.
Fixes: #1109
Previously, the delay-apply status of the parent `GSettings` object
would be partially inherited: `settings->priv->backend` in the child
`GSettings` object would point to a `GDelayedSettingsBackend`, but
`settings->priv->delayed` would be `NULL`.
The expectation from https://bugzilla.gnome.org/show_bug.cgi?id=720891
was that `get_child()` would fully inherit delay-apply status.
So, ensure that `settings->priv->delayed` is correctly set to point to
the delayed backend when constructing any `GSettings`. Update the tests
to work again (presumably the inverted test was an oversight in the
original changes).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
`g_settings_reset()` changes the value of the setting to `NULL`;
`add_to_tree()` was not handling that correctly.
Add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2426
Emit this when we're about to spawn or DBus activate a GAppInfo. This
allows lauchers to keep the appinfo associated with a startup id.
We use a GVariant to allow for future exansion of the supplied data.
This is a partial revert of commit
f378352051, as the previous commits have
silenced the AddressSanitizer warnings for `GContentType`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2310
If the first power-profile installed test fails (for example, because
xdg-desktop-portal isn’t available), correctly tear down the dbusmock
object, or it will cause setUp() to fail when the next test in the suite
is run.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2481
When first creating the monitor, correctly set its property value to the
value from the portal, rather than waiting for the portal value to
change to set it.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2481
We were lucky that this worked in some cases (the test is racy), but we
should actually run the condition check each loop, rather than when the
function is called.
Spotted by Martin Pitt:
96a8c02d24 (r54773831)
The modification time test creates a file, gets the modification time in
seconds, then gets the modification time in microseconds and assumes
that the difference between the two has to be above 0.
As rare as this may be, it can happen:
$ stat g-file-info-test-50A450 -c %y
2021-07-06 18:24:56.000000767 +0100
Change the test to simply assert that the difference not negative to
handle this case.
These were missing from the test before the previous commit ported from
`GMainLoop` to `GMainContext`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
It makes combination exit conditions a lot easier than when using
`g_main_loop_quit()` from different callbacks.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
WebKit wants these private key properties to be readable in order to
implement a deserialization function. Currently they are read-only
because at the time GTlsCertificate was originally designed, the plan
was to support PKCS#11-backed private keys: private keys that are stored
on a smartcard, where the private key is completely unreadable. The
design goal was to support both memory-backed and smartcard-backed
private keys with the same GTlsCertificate API, abstracting away the
implementation differences such that code using GTlsCertificate doesn't
need to know the difference.
The original PKCS#11 implementation was never fully baked and at some
point in the past I deleted it all. It has since been replaced with a
new implementation, including a GTlsCertificate:private-key-pkcs11-uri
property, which is readable. So our current API already exposes the
differences between normal private keys and PKCS#11-backed private keys.
The point of making the private-key and private-key-pem properties
write-only was to avoid exposing this difference.
Do we have to make this API function readable? No, because WebKit could
be just as well served if we were to expose serialize and deserialize
functions instead. But WebKit needs to support serializing and
deserializing the non-private portion of GTlsCertificate with older
versions of GLib anyway, so we can do whatever is nicest for GLib. And I
think making this property readable is nicest, since the original design
reason for it to not be readable is now obsolete. The disadvantage to
this approach is that it's now possible for an application to read the
private-key or private-key-pem property, receive NULL, and think "this
certificate must not have a private key," which would be incorrect if
the private-key-pkcs11-uri property is set. That seems like a minor
risk, but it should be documented.
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
Confusingly, g_spawn_check_exit_status() takes a wait status, not an
exit status, so passing g_subprocess_get_exit_status() to it is
incorrect (although both encodings happen to use 0 to encode success
and a nonzero value to encode failure, so in practice this probably
had the desired effect).
Signed-off-by: Simon McVittie <smcv@collabora.com>
Following on from the previous commit, some explicit
`g_main_context_wakeup()` calls were missing from the test code which
only uses `GMainContext`.
Add them, and also add some assertions to check that these functions are
being called in the expected thread (as the code comments say).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a bit of a compromise. Since the option parsing in
`GApplication` is built on `GOptionContext`, there’s no way to
reliably indicate that a given option was passed by the user, other than
by its value changing. If the default value is zero, but the user
explicitly passed zero, nothing changes, so it’s not obvious that the
option was explicitly provided.
When just `GOptionContext` is being used, this is fine, as that’s
obvious what will happen from the way the API is built. With
`GApplication::handle-local-options`, though, the `GVariantDict`
provided by GLib to the callback claims to only contain the values of
the options provided by the user, and no defaults.
It’s not actually possible for GLib to do that reliably.
Previously, GLib was dropping all numeric values which were zero valued
(i.e. the defaults), as they *could* have been the defaults. It seems
like a slightly better behaviour to instead *not* drop those numeric
values, and err on the side of reporting some defaults as user-provided
(even if they weren’t) rather than dropping some user-provided values
which happen to be the defaults.
This adds a test for the case of parsing a double; the cases for
integers are analogous.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2329
The tests in `gdbus-names.c` use a mixture of `GMainLoop` and iterating
a `GMainContext` directly. Some of the helper functions based around the
`OwnNameData` struct use the `loop` `GMainLoop` even when called from
tests like `watch_with_different_context()` which themselves use
`GMainContext` directly.
Thus, it’s possible for the `GMainLoop` to not be running, while the
test is iterating on `g_main_context_iteration()`. In this case,
`g_main_loop_quit()` is a no-op and will not wake up the `GMainContext`.
This causes the test to livelock in around 1 in 1200 test runs.
Fix this by adding an explicit `g_main_context_wakeup()` call after each
`g_main_loop_quit()` call. A more comprehensive fix would be to port all
the tests in this file to iterating `GMainContext` directly, and drop
all the `GMainLoop` usage, but I don’t have time for that right now.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Relax the requirement for the test to only be compiled/run under gcc,
since a version of LLVM was released which supports `--add-symbol`.
`objcopy` should be overrideable to be `llvm-objcopy` by using a machine
file as per https://mesonbuild.com/Machine-files.html#binaries.
Suggested and tested by Grigory Vasilyev.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2423
Since commit 87e19535fe, the ETag check when writing out a file through
a symlink (following the symlink) has been incorrectly using the ETag
value of the symlink, rather than the target file. This is incorrect
because the ETag should represent the file content, not its metadata or
links to it.
Fix that, and add a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2417
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
Include the base URI in the `g_test_bug()` calls instead. This resolves
inconsistencies between the old bug base (bugzilla.gnome.org) and the
new bug base (gitlab.gnome.org). It also has the advantage that the URI
passed to `g_test_bug()` is now clickable in the code editor, rather
than being split across two locations.
See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/275#note_303175
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
gio/tests/unix-streams.c: In function ‘test_write_async_wouldblock’:
gio/tests/unix-streams.c:692:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
692 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
gio/tests/unix-streams.c: In function ‘test_writev_async_wouldblock’:
gio/tests/unix-streams.c:780:17: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
780 | for (i = 0; i < 4 * pipe_capacity; i++)
| ^
An application that has been shut down is still marked as registered
even if its implementation has been already destroyed.
This may lead to unguarded crashes when calling functions that have
assumptions for being used with registered applications.
So, when an application is registered, mark it as unregistered just
before destroying its implementation and after being shut down, so that
we follow the registration process in reversed order.
Added tests
gio/tests/socket-common.c: In function ‘socket_address_from_string’:
gio/tests/socket-common.c:50:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
50 | for (i = 0; i < G_N_ELEMENTS (unix_socket_address_types); i++)
| ^
gio/tests/gnotification-server.c: In function ‘g_notification_server_bus_acquired’:
gio/tests/gnotification-server.c:224:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
224 | };
| ^
gio/tests/gdbus-proxy.c: In function ‘strv_equal’:
gio/tests/gdbus-proxy.c:158:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
158 | res = g_strv_length (strv) == count;
| ^~
gio/tests/gsettings.c: In function ‘strv_set_equal’:
gio/tests/gsettings.c:2268:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
2268 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/gdbus-testserver.c:806:1: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘const struct _GDBusInterfaceVTable’}
806 | };
| ^
In file included from gio/gio.h:53,
from gio/tests/gdbus-testserver.c:1:
gdbusconnection.h:395:12: note: ‘padding’ declared here
395 | gpointer padding[8];
| ^~~~~~~
gio/tests/gdbus-testserver.c: In function ‘handle_method_call’:
gio/tests/gdbus-testserver.c:334:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
334 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:343:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
343 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:352:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
352 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:361:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
361 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:370:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
370 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:379:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
379 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:388:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
388 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:397:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
397 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/gdbus-testserver.c:406:23: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
406 | for (i = 0; i < n_elts; i++)
| ^
gio/tests/mimeapps.c: In function ‘strv_equal’:
gio/tests/mimeapps.c:31:32: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
31 | res = g_strv_length (strv) == count;
| ^~
gio/tests/proxy-test.c: In function ‘do_echo_test’:
gio/tests/proxy-test.c:855:25: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘gsize’ {aka ‘long unsigned int’}
855 | for (total = 0; total < nwrote; total += nread)
| ^
gio/tests/file.c: In function ‘written_cb’:
gio/tests/file.c:358:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘size_t’ {aka ‘long unsigned int’}
358 | if (data->pos < strlen (data->data))
| ^
gio/tests/gdbus-test-codegen.c: In function ‘check_object_manager’:
gio/tests/gdbus-test-codegen.c:2344:20: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘int’
2344 | if (om_signal_id != -1)
| ^~
gio/tests/testfilemonitor.c: In function ‘check_expected_events’:
gio/tests/testfilemonitor.c:124:39: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘gsize’ {aka ‘long unsigned int’}
124 | for (i = 0, li = 0, l = recorded; i < n_expected && l != NULL;)
| ^
gio/tests/socket.c: In function ‘test_get_available’:
gio/tests/socket.c:1696:53: error: comparison of integer expressions of different signedness: ‘gssize’ {aka ‘long int’} and ‘long unsigned int’
1696 | if (g_socket_get_available_bytes (server) > sizeof (data))
| ^
gio/tests/gdbus-export.c:130:1: error: missing initializer for field ‘properties’ of ‘GDBusInterfaceInfo’ {aka ‘const struct _GDBusInterfaceInfo’}
130 | };
| ^
In file included from gio/gio.h:57,
from gio/tests/gdbus-export.c:21:
gio/gdbusintrospection.h:156:25: note: ‘properties’ declared here
156 | GDBusPropertyInfo **properties;
| ^~~~~~~~~~
...
gio/tests/actions.c: In function ‘strv_set_equal’:
gio/tests/actions.c:177:41: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint’ {aka ‘int’}
177 | res = g_strv_length ((gchar**)strv) == count;
| ^~
gio/tests/actions.c: In function ‘test_parse_detailed’:
gio/tests/actions.c:473:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
473 | for (i = 0; i < G_N_ELEMENTS (testcases); i++)
| ^
gio/tests/actions.c: In function ‘test_entries’:
gio/tests/actions.c:375:5: error: missing initializer for field ‘parameter_type’ of ‘GActionEntry’ {aka ‘const struct _GActionEntry’}
375 | { "foo", activate_foo },
| ^
In file included from gio/gio.h:31,
from gio/tests/actions.c:1:
gio/gactionmap.h:63:16: note: ‘parameter_type’ declared here
63 | const gchar *parameter_type;
| ^~~~~~~~~~~~~~
...
gio/tests/gdbus-peer-object-manager.c: In function ‘mock_interface_get_vtable’:
gio/tests/gdbus-peer-object-manager.c:111:3: error: missing initializer for field ‘padding’ of ‘GDBusInterfaceVTable’ {aka ‘struct _GDBusInterfaceVTable’}
111 | };
| ^
gio/tests/network-address.c: In function ‘main’:
gio/tests/network-address.c:1194:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1194 | for (i = 0; i < G_N_ELEMENTS (host_tests); i++)
| ^
gio/tests/network-address.c:1201:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1201 | for (i = 0; i < G_N_ELEMENTS (uri_tests); i++)
| ^
gio/tests/network-address.c:1208:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1208 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/network-address.c:1215:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1215 | for (i = 0; i < G_N_ELEMENTS (address_tests); i++)
| ^
gio/tests/gsubprocess.c: In function ‘test_communicate_async’:
gio/tests/gsubprocess.c:774:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
774 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async’:
gio/tests/gsubprocess.c:1025:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1025 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_cancelled_async’:
gio/tests/gsubprocess.c:1058:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1058 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/gsubprocess.c: In function ‘test_communicate_utf8_async_invalid’:
gio/tests/gsubprocess.c:1202:3: error: missing initializer for field ‘running’ of ‘TestAsyncCommunicateData’
1202 | TestAsyncCommunicateData data = { flags, 0, };
| ^~~~~~~~~~~~~~~~~~~~~~~~
gio/tests/converter-stream.c: In function ‘g_expander_converter_convert’:
gio/tests/converter-stream.c:128:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
128 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c: In function ‘g_compressor_converter_convert’:
gio/tests/converter-stream.c:234:23: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
234 | if (in_end - in < block_size)
| ^
gio/tests/converter-stream.c:244:21: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
244 | for (i = 0; i < block_size; i++)
| ^
gio/tests/converter-stream.c:257:33: error: comparison of integer expressions of different signedness: ‘long int’ and ‘gsize’ {aka ‘long unsigned int’}
257 | if (v == 0 && in_end - in == block_size && (flags & G_CONVERTER_INPUT_AT_END) == 0)
| ^~
gio/tests/converter-stream.c: In function ‘test_expander’:
gio/tests/converter-stream.c:356:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘long unsigned int’
356 | for (i = 0; i < sizeof(unexpanded_data); i++)
| ^
gio/tests/converter-stream.c: In function ‘test_compressor’:
gio/tests/converter-stream.c:445:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
445 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:454:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
454 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘test_converter_pollable’:
gio/tests/converter-stream.c:1077:17: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1077 | for (i = 0; i < expanded_size; i++)
| ^
gio/tests/converter-stream.c:1086:16: error: comparison of integer expressions of different signedness: ‘int’ and ‘gsize’ {aka ‘long unsigned int’}
1086 | g_assert (i == expanded_size -1);
| ^~
gio/tests/converter-stream.c: In function ‘main’:
gio/tests/converter-stream.c:1220:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1220 | for (i = 0; i < G_N_ELEMENTS (compressor_tests); i++)
| ^
gio/tests/converter-stream.c:1223:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1223 | for (i = 0; i < G_N_ELEMENTS (truncation_tests); i++)
| ^
gio/tests/converter-stream.c:1226:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
1226 | for (i = 0; i < G_N_ELEMENTS (charset_tests); i++)
| ^
gio/tests/contenttype.c: In function ‘test_tree’:
gio/tests/contenttype.c:337:17: error: comparison of integer expressions of different signedness: ‘gint’ {aka ‘int’} and ‘long unsigned int’
337 | for (i = 0; i < G_N_ELEMENTS (tests); i++)
| ^
gio/tests/contexts.c: In function ‘test_context_specific_emit’:
gio/tests/contexts.c:379:21: error: comparison of integer expressions of different signedness: ‘guint’ {aka ‘unsigned int’} and ‘gint32’ {aka ‘int’}
379 | for (i = 0; i < g_test_rand_int_range (1, 5); i++)
| ^
gio/tests/contexts.c:383:55: error: comparison of integer expressions of different signedness: ‘int’ and ‘guint’ {aka ‘unsigned int’}
383 | while (g_atomic_int_get (&observed_values[i]) != n)
| ^~
gio/tests/contexts.c:387:41: error: comparison of integer expressions of different signedness: ‘gint64’ {aka ‘long int’} and ‘guint64’ {aka ‘long unsigned int’}
387 | if (g_get_monotonic_time () > expiry)
| ^
1) Check that schedule_call_in_idle code branch of gdbusnamewatching.c
is working to call vanished handler in the thread which had watched the name
2) Check cancellation of vanished handler if the name is unwatched before
vanished callback is dispatched.
Closes#2011
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
`""` is not a valid path (`stat()` on it returns `ENOENT`). Previously,
a full `GLocalFile` was being created, which ended up resolving to
`$CWD`, through path canonicalisation. That isn’t right.
Fix it by creating a `GDummyFile` instead, and adding a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2328
Calling `dlopen()` with `libutil.so` makes the installed tests depend on
having glibc's development files installed. To avoid this, we can work
out the runtime library name at build time and `dlopen` that instead.
This approach is [taken from libfprint][1], thanks to Marco Trevisan.
[1]: f401f399a8
`ENXIO` can be returned from `open(2)` for special files (FIFOs, device
files and domain sockets) which are not backed by anything.
This fixes the error returned by `g_file_replace()` when trying to
replace such a file, so that it now matches the documentation.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These test all the functionality and combinations of flags I can think
of. They do not cover dynamic behaviour (for example, what would happen
if the source file is deleted by another process part-way through a call
to `g_file_replace()`).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The `G_FILE_CREATE_REPLACE_DESTINATION` flag is equivalent to unlinking
the destination file and re-creating it from scratch. That did
previously work, but in the process the code would call `open(O_CREAT)`
on the file. If the file was a dangling symlink, this would create the
destination file (empty). That’s not an intended side-effect, and has
security implications if the symlink is controlled by a lower-privileged
process.
Fix that by not opening the destination file if it’s a symlink, and
adjusting the rest of the code to cope with
- the fact that `fd == -1` is not an error iff `is_symlink` is true,
- and that `original_stat` will contain the `lstat()` results for the
symlink now, rather than the `stat()` results for its target (again,
iff `is_symlink` is true).
This means that the target of the dangling symlink is no longer created,
which was the bug. The symlink itself continues to be replaced (as
before) with the new file — this is the intended behaviour of
`g_file_replace()`.
The behaviour for non-symlink cases, or cases where the symlink was not
dangling, should be unchanged.
Includes a unit test.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2325
Since a following commit is going to add a new test which references
Gitlab, so it’s best to move the URI bases inside the test cases.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For non-Linux UNIX systems, the label 'close_libutil:' in
'test_pollable_unix_pty()' will have no statement that goes with that
label. Just do a 'return' on non-Linux UNIX systems.
Expand an existing unit test to check that the target FD of a
`g_subprocess_launcher_take_fd()` call doesn’t get closed when
`g_subprocess_launcher_close()` is called. Only the source FD should be
closed by the parent process.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2332
Swedish as spoken in El Salvador is not listed in
/usr/share/i18n/SUPPORTED, and in any case is probably not what we meant.
A more plausible language code would be Swedish as spoken in Sweden.
Prompted by improving the Debian packaging of GLib to generate most of
the language codes mentioned in the tests, so that we can have better
test coverage.
Signed-off-by: Simon McVittie <smcv@collabora.com>
It’s not feasible to test that the require-same-user flag can cause
authentication to fail, as that would require the build environment to
have two users available. We can, however, test that it passes when
authenticating a client and server running under the same user account.
I have manually tested that the new flag works, by running the following
as user A:
```
`$prefix/gdbus-daemon --print-env &`
gdbus call --session --dest org.freedesktop.DBus --object-path /org/freedesktop/DBus --method org.freedesktop.DBus.ListNames
```
And then running the `gdbus call` command again as user B (with the same
value for `DBUS_SESSION_BUS_ADDRESS` in the environment), which
produces:
```
Error connecting: Unexpected lack of content trying to read a line
```
(an authentication rejection)
Commenting out the use of
`G_DBUS_SERVER_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER` from
`gdbusdaemon.c`, the `gdbus call` command succeeds for both users.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The GDBusConnectionFlags and GDBusServerFlags can affect how we carry
out authentication and authorization, either making it more or less
restrictive, so it's desirable to "fail closed" if a program is compiled
against a new version of GLib but run against an old version.
Signed-off-by: Simon McVittie <smcv@collabora.com>
