Iterate the given `context` while waiting, rather than sleeping. This
ensures that if the errant `GDBusConnection` ref is held by some pending
callback in the given `context`, it will actually be released.
Typically `context` is going to be the global default main context.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
This introduces no functional changes, but makes the code a little more
explicit about which connection and main context it’s operating on.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
`CallDestroyNotifyData` never uses that `GMainContext`, and holding a
ref to it could cause reference count cycles if the `GMainContext` is no
longer being iterated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1515
The fix for bgo#651133 (commit 7e0f890e38) introduced a kind of weak
ref, which had to be thread-safe due to the fact that `GDBusProxy`
operates in one thread but can emit signals in another.
Since that commit, `GWeakRef` was added, which does the same thing. Drop
the custom code in favour of it; this should be functionally equivalent,
but using an RW lock rather than a basic mutex, which should reduce
contention.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These checks used to be a precondition on test_threaded_singleton(); but
the earlier tests could leave the refcount of the shared connection in a
bad state, and this wouldn’t be caught until later.
Factor out the check, increase the iteration count to 1000 (so the check
blocks for up to 1s rather than 100ms), and call it in more places.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test rather useless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1515
Newer versions of xdg-desktop-portal need a newer PipeWire, so use the
latest release that doesn't contain this change to avoid having
something else to build.
CI scripts are done using a shell with 'set -e' enabled, but using
'&&' means that the line won't "fail". Run the different commands
sequentially instead.
Spotted by Simon McVittie <smcv@collabora.com>
Closes: #2043
When calling `g_set_object()` for a type derived from `GObject`, GCC 9.2
was giving the following strict aliasing warning:
```
../../source/malcontent/libmalcontent-ui/user-controls.c:1001:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
1001 | if (g_set_object (&self->user, user))
/opt/gnome/install/include/glib-2.0/gobject/gobject.h:744:33: note: in definition of macro ‘g_set_object’
744 | (g_set_object) ((GObject **) (object_ptr), (GObject *) (new_object)) \
| ^~~~~~~~~~
```
This was due to the `(GObject **)` cast.
Pass the pointer through a union to squash this warning. We already do
some size and type checks of the dereferenced type, which should catch
casual errors. The `g_object_ref()` and `g_object_unref()` calls which
subsequently happen inside the `g_set_object()` function also do some
dynamic type checks.
Add a test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
mtab_file_changed_id is not currently removed when finalizing, which
could potentially lead to segfaults. Let's remove the source when
finalizing to avoid this.
mtab_file_changed_id might be set on thread default context, but it is
always cleared on the global context because of usage of g_idle_add. This
can cause the emission of redundant "mounts-change" signals. This should
not cause any issues to the client application, but let's attach the idle
source to the thread-default context instead to avoid those races for sure.
The `get_mounts_timestamp()` function uses `mount_poller_time` when
`proc_mounts_watch_source` is set, but the `mount_poller_time` is not
initialized in the same time as `proc_mounts_watch_source`. This may
cause that zero, or some outdated value is returned. Let's initialize
`mount_poller_time` to prevent invalid values to be returned.
The Nautilus test suite often crashes with "GLib-FATAL-CRITICAL:
g_source_is_destroyed: assertion 'g_atomic_int_get (&source->ref_count)
> 0' failed" if it is started with "GIO_USE_VOLUME_MONITOR=unix". This
is because GUnixMountMonitor is simultaneously used from multiple
threads over GLocalFile and GVolumeMonitor APIs. Let's add guards for
proc_mounts_watch_source and mount_poller_time variables to prevent
those crashes.
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2030
There was a slight race in name ownership: a gap between calling
`RequestName` (or receiving its reply) and subscribing to `NameLost`. In
that gap, another process could request and receive the name, and this
one wouldn’t know about it.
Fix that by subscribing to `NameAcquired` and `NameLost` before calling
`RequestName`, and then unsubscribing again if the subscriptions turn
out not to be necessary (if the process can’t own the requested name).
Spotted and diagnosed by Miika Karanki.
One of the tests needs an additional iteration of the main loop in order
to free all the signal closures before it can complete its checks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1517
This is a fairly large refactoring. The highlights are:
- Removing in-progress connections/addresses from GSocketClientAsyncConnectData:
This caused issues where multiple ConnectionAttempt's would step over eachother
and modify shared state causing bugs like accidentally bypassing a set proxy.
Fixes#1871Fixes#1989Fixes#1902
- Cancelling address enumeration on error/completion
- Queuing successful TCP connections and doing application layer work serially:
This is more in the spirit of Happy Eyeballs but it also greatly simplifies
the flow of connection handling so fewer tasks are happening in parallel
when they don't need to be.
The behavior also should more closely match that of g_socket_client_connect().
- Better track the state of address enumeration:
Previously we were over eager to treat enumeration finishing as an error.
Fixes#1872
See also #1982
- Add more detailed documentation and logging.
Closes#1995
There were some problems about where to install `gio-launch-desktop` to
support multiarch systems without circular dependencies. Simon McVittie
suggested that, actually, given the current set of platforms supported
by `GDesktopAppInfo` (they’re all POSIX), we could just use `sh`.
That simplifies things nicely. `gio-launch-desktop` can always be
resurrected (and the multiarch debate continued and resolved) if needed
in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1633
Some CI platforms invoke these tests with euid != 0 but with
capabilities. Detect whether we have Linux CAP_DAC_OVERRIDE or other
OSs' equivalents, and skip tests that rely on DAC permissions being
denied if we do have that privilege.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2027
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2028
Some CI platforms invoke tests as euid != 0, but with capabilities that
include CAP_SYS_RESOURCE and/or CAP_SYS_ADMIN. If we detect this,
we can't test what happens if our RLIMIT_NPROC is too low to create a
thread, because RLIMIT_NPROC is bypassed in these cases.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Fixes: https://gitlab.gnome.org/GNOME/glib/issues/2029
The relevant parts of the generated example documentation are already
`xi:include`d into the `migrating-gdbus.xml` page, so are turned into
HTML there. Installing them separately means they also get installed
into `/usr/share/gtk-doc/html/gdbus-object-manager-example/`, which
seems redundant.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This does not have any behaviour changes but is cleaner. The mutex is
only unlocked now after all operations on the context are done and right
before freeing the mutex and the context itself.
Instead of destroying sources directly while freeing the context, and
potentially freeing them if this was the last reference to them, collect
new references of all sources in a separate list before and at the same
time invalidate their context so that they can't access it anymore. Only
once all sources have their context invalidated, destroy them while
still keeping a reference to them. Once all sources are destroyed we get
rid of the additional references and free them if nothing else keeps a
reference to them anymore.
This fixes a regression introduced by 26056558be in 2012.
The previous code that invalidated the context of each source and then
destroyed it before going to the next source without keeping an
additional reference caused memory leaks or memory corruption depending
on the order of the sources in the sources lists.
If a source was destroyed it might happen that this was the last
reference to this source, and it would then be freed. This would cause
the finalize function to be called, which might destroy and unref
another source and potentially free it. This other source would then
either
- go through the normal free logic and change the intern linked list
between the sources, while other sources that are unreffed as part of
the main context freeing would not. As such the list would be in an
inconsistent state and we might dereference freed memory.
- go through the normal destroy and free logic but because the context
pointer was already invalidated it would simply mark the source as
destroyed without actually removing it from the context. This would
then cause a memory leak because the reference owned by the context is
not freed.
Fixes https://github.com/gtk-rs/glib/issues/583 while still keeping
https://bugzilla.gnome.org/show_bug.cgi?id=661767 fixes.
We first have to ref the next source and then unref the previous one.
This might be the last reference to the previous source, and freeing the
previous source might unref and free the next one which would then leave
use with a dangling pointer here.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/2031
