The necessary review and integration work has not happened, and
we don't want to enshrine it in this unproven state.
It will be back when the world is ready for it.
Previously, the code only initialized the enumerator if the address
hadn't had cached addresses. But creating an enumerator cached the
addresses, so the second one failed to work.
Make the certificate and peer-certificate properties virtual, and add
peer-certificate-errors as well. Change the documentation on
peer-certificate to say that it's not set until after the handshake
succeeds (which means notify::peer-certificate can be used to tell
when a handshake has completed).
We were combining "allow un-notified closes" and "close without
notifying" into a single property, which meant that it was impossible
to "be liberal in what you accept and conservative in what you send".
Change require-close-notify to only be about the peer behavior, and
make our connections always close-notify properly when closing (while
noting that you can just close the base-io-stream directly if you want
to do an unclean close).
Trying to do this as a signal won't work well with either
GTlsCertificateDB (in which case looking up a certificate in the db is
a blocking/asynchronous act) or session resumption support (in which
case the certificate or lack thereof is part of the session definition
and so needs to be known immediately). Make the caller use
g_tls_connection_set_certificate() ahead of time (or when retrying)
instead.
Add a method to verify a certificate against a CA; this can be used
for apps that need to test against non-default CAs.
Also make the GTlsCertificate::issuer property virtual
This adds an extension point for TLS connections to gio, with a
gnutls-based implementation in glib-networking.
Full TLS support is still a work in progress; the current API is
missing some features, and parts of it may still be changed before
2.28.
https://bugzilla.gnome.org/show_bug.cgi?id=588189
GProxyConnection is a class that was added for proxy support;
g_socket_client_connect() returns a GSocketConnection, but in some
cases (eg, encrypted SOCKS), GProxy might return a GIOStream that is
not a GSocketConnection. In that case, GSocketClient would wrap the
stream up in a GProxyConnection, which is a subclass of
GSocketConnection but uses the input/output streams of the wrapped
connection.
GTlsConnection is not a GSocketConnection, so it has the same problem,
so it will need the same treatment. Rename the class to
GTcpWrapperStream, and make it public, so people can extract the base
stream from it when necessary.
(This is not ideal and GSocketClient will need to be revisited as an
API at some point...)
https://bugzilla.gnome.org/show_bug.cgi?id=588189
When interfacing with APIs that expect unix-style async I/O, it is
useful to be able to tell in advance whether a read/write is going to
block. This adds new interfaces GPollableInputStream and
GPollableOutputStream that can be implemented by a GInputStream or
GOutputStream to add _is_readable/_is_writable, _create_source, and
_read_nonblocking/_write_nonblocking methods.
Also, implement for GUnixInput/OutputStream and
GSocketInput/OutputStream
https://bugzilla.gnome.org/show_bug.cgi?id=634241
g_cancellable_create_source() returns a GSource that triggers when its
corresponding GCancellable is cancelled. This can be used with
g_source_add_child_source() to add cancellability to a source.
Port gasynchelper's FDSource to use this rather than doing its own
cancellable handling, and also fix up its callback argument order to
be more normal.
https://bugzilla.gnome.org/show_bug.cgi?id=634239
Otherwise you break the fallback + recommended distinction for a content
type, as you end up adding support for a given content type to *all* of
the applications claiming to support the supertype.
This ways UIs can differentiate between them, and show them in different
section.
- a recommended app is an application that claims to support a content
type directly, not by a supertype derivation.
- a fallback app is an application that claims to support a supertype of
a given content type.
So that if we already have a list of emblems we know we want to add to
the icon, we can use e.g. a for loop to add them all, without picking
the first and looping from the second.
https://bugzilla.gnome.org/show_bug.cgi?id=634504
Removing an extension point is an API and ABI break. In particular, it
causes (older) gvfs versions to fail loading with a linkage error from
ld which in turn makes the desktop unusable.
So this reinstate the extension point and API provided by it, but
deprecates and does not use it. So no functionality is changed.
This reverts parts of commit 9b262f1c5f.
Complaints-Also-To: Ryan Lortie <desrt@desrt.ca>
-gdbusmessage.c and gregistrysettingsbackend.c is updated to fix C99-style declarations
-also fixed typo for displaying registry entry in gregistrysettingsbackend.c (\% -> \\%)
If specified, the signal subscription is setup client-side but the match
rule is not sent to the server. This allows the caller to manually
register more detailed match rules.
glib is trying to move toward using microseconds-in-gint64 as its
universal time format.
No real API breaks here since GTimeSpec is new this unstable release
series.
Add g_simple_async_result_new_take_error and
g_simple_async_result_take_error, which take over ownership of the
given error. Based on a patch by Christian Persch.
https://bugzilla.gnome.org/show_bug.cgi?id=629247
This is similar to gconftool-2 -R, which is very handy
for collecting information for bug reports, etc. It is now
possible to say gsettings list-recursively org.foo.bar, and
this will produce a list of schemas, keys and values for
org.foo.bar and all its child and grandchild schemata,
recursively.
https://bugzilla.gnome.org/show_bug.cgi?id=632571
Add support for passing the full contents of the environment to the
primary instance (by storing it in the platform_data) when
G_APPLICATION_SEND_ENVIRONMENT is in the flags.
RFC 2782 says that if there is no SRV record for
_SERVICE._PROTOCOL.DOMAIN, you should fall back to trying just DOMAIN,
with the default port for SERVICE. Do that.
https://bugzilla.gnome.org/show_bug.cgi?id=629274
Otherwise, attempting to create a GSocketConnection from the socket
will likely return the wrong type, since the protocol won't match any
of the registered subtypes.
Also add the start of a GSocket test program (from davidz).
https://bugzilla.gnome.org/show_bug.cgi?id=627171
Makes explicit the fact that you are interacting with the individual
action rather than the group and removes potential namespace conflicts
with classes implementing the interface (like g_application_activate()
vs g_application_activate_action()).
Create the gobject property for it.
Tweak the logic of having a pending timeout at the time that the
application starts -- run the mainloop with a use count of zero if there
is a timeout active.
Provides access to the g_settings_get_range() functionality, converting
its return value to something that's reasonable for printing at the
console and potentially parseable. The format may change.
Bug #631264.
Prevent assertion messages from spewing forth and also ensure that we
exit with an error status in the event that the value was out of range.
Bug #631264.
Don't store the "none" value for flags into the compiled schema file.
"none" should never appear as a value -- no flags set is indicated by an
empty array.
Ensure that the strinfo is output in little-endian byte order on big
endian machines.
GSettings is now passing all of its tests on PowerPC.
Bug #630968 is closed.
GSettings relies on parts of the schema infromation remaining
unbyteswapped (the strinfo database, for example) while requiring other
parts to be in native order (the default value, constraints, etc.).
Lift the byteswapping into a place where we can do it selectively.
The test case was passing a guint16 to g_object_get() for a guint
property. That's invalid on all systems, although it works (more or
less) on little endian ones. On big endian it's a total no-go.
For GSettings.
Use the functionality introduced in the last commit to simplify our
notify dispatching and increase the safety of doing so (by ensuring that
the context is acquired in the current thread for the duration of the
dispatch).
This closes bugs #623400 and #629849.
Rewrite the GSettings tool.
Improvements/changes:
- simplify the code by performing common actions (like creating a
schema) in only one place instead of one per-command
- new features (list schemas, list keys, monitor multiple, etc)
- factor-out bash completion and implement in shellscript
- input validation: should never abort due to invalid inputs
Still to do:
- proper error checking for ranges/choices
- support for querying range/choice information
- bash completion support for enums
Closes bug #629289, possibly among others.
In its previous form, g_settings_list_schemas() was not useful as a tool
to prevent aborts due to using g_settings_new() with an invalid schema
name. This is because g_settings_list_scheams() also listed relocatable
schemas, and calling g_settings_new() for those would abort just the
same as if you called it for a non-existent schema.
Modify g_settings_list_schemas() so that it only returns schemas for
which it is safe to call g_settings_new(). Add another call for sake of
completeness: g_settings_list_relocatable_schemas().
Implement the second feature requested in the bug: silently ignore
override files that attempt to override schemas that are not currently
installed.
Also, support 'strictness' being optional for other errors when parsing
override files (ie: inability to open the file, unknown key name, parse
errors, out of range). We don't completely back out the file in this
case — as that is difficult with the current implementation — but just
ignore the override for the single key.
Implement the first of two features requested in the bug: when
encountering a broken .xml schema file, back out the changes in that
file and continue to parse other files.
This prevents a single broken .xml file from messing up GSettings for
everyone else.
Add a --strict option to get the old behaviour. Use this from the test
cases.
Move all the annotations over from gobject-introspection.
They will not be used directly by the introspection scanner for now,
instead they will be extracted by a script and updated manually
until introspection is properly integrated into the glib build
It doesn't really work right now because of a dbus-daemon(1) bug - see
the comment added in the TODO section of gdbusconnection.c. So revert
to old behavior. The downside is a lot of files in /tmp but right now
that's better than not being able to run tests in a loop.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this fix, the ./gdbus-connection test case occasionally fails, see
https://bugzilla.gnome.org/show_bug.cgi?id=629945#c5
like this
/gdbus/connection/basic: OK
/gdbus/connection/life-cycle: **
ERROR:gdbus-connection.c:223:test_connection_life_cycle: assertion failed:
(!quit_mainloop_fired)
cleaning up bus with pid 21794
Aborted (core dumped)
because the callback didn't happen on the same thread as where we are
running the loop.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since we make message buses come and go, we need to ensure that the
singleton connection instance goes away before attempting to call
g_bus_get_sync() or similar.
Signed-off-by: David Zeuthen <davidz@redhat.com>
When under load, a one second timeout is just not enough. This can be
observed by e.g. restarting a CPU- and IO-intensive application like a
web browser with many tabs while running the test cases. Therefore,
bump the timeouts to 30 seconds.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Turns out that GDBusWorker will issue callbacks (in its own thread)
even after g_dbus_worker_stop() has been called. This would rarely
happen (and unreffing a connection is even rarer) so only saw this bug
occasionally when running the gdbus-connection test case in a loop.
Fix up this issue by maintaining a set of GDBusConnection objects that
are currently "alive" and do nothing in the callbacks if the passed
user_data pointer is not in this set.
Also attempted to fix up a race condition with
_g_object_wait_for_single_ref_do() and its use of GObject toggle
references - for now, just resort to busy waiting, thereby
sidestepping the toggle reference mess altogether.
Signed-off-by: David Zeuthen <davidz@redhat.com>
It looks like the deserialisation function in GSocketControlMessage can
potentially leak a reference to the class structure of a
GSocketControlMessage subclass (although the particular code path is
probably never hit).
Clean up the code a bit.
Also, make sure that the GUnixCredentialsMessage type is registered
before attempting deserialisation.
Closes bug #629687.
==7269== 144 bytes in 6 blocks are definitely lost in loss record 1,282 of 1,325
==7269== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==7269== by 0x4056B74: g_malloc (gmem.c:164)
==7269== by 0x406EDB6: g_slice_alloc (gslice.c:842)
==7269== by 0x406EDFB: g_slice_alloc0 (gslice.c:854)
==7269== by 0x413C627: g_type_create_instance (gtype.c:1867)
==7269== by 0x412276A: g_object_constructor (gobject.c:1480)
==7269== by 0x4121E5D: g_object_newv (gobject.c:1264)
==7269== by 0x4121BD3: g_object_new (gobject.c:1176)
==7269== by 0x417CFB9: g_credentials_new (gcredentials.c:156)
==7269== by 0x41D9DBC: g_unix_credentials_message_deserialize (gunixcredentialsmessage.c:149)
==7269== by 0x41C422C: g_socket_control_message_deserialize (gsocketcontrolmessage.c:198)
==7269== by 0x41BFCE3: g_socket_receive_message (gsocket.c:3289)
==7269== by 0x41D99CE: g_unix_connection_receive_credentials (gunixconnection.c:476)
==7269== by 0x41FA829: _g_dbus_auth_run_server (gdbusauth.c:987)
==7269== by 0x4205DDB: initable_init (gdbusconnection.c:2196)
Bug #629689.
These functions are meant to replace the read_until() flavour, with the
following improvements:
- consistency between the synchronous and asynchronous versions as to
if the separator character is read (it never is).
- support for using a nul byte as a separator character by way of
addition of a length parameter which allows stop_chars to be treated
as a byte array rather than a nul-terminated string.
The read_until() functions are not yet formally deprecated, but a note
has been added to the documentation warning not to use them as they will
be in the future.
This is bug #584284.
GSettings internally assumed that a change in key writability implied a
change in value. That may be true for some backends. Let those
backends deal with the situation for themselves.
The root problem is with GObject - for now, just work around it in
GDBus. Also include a test-case. See
https://bugzilla.gnome.org/show_bug.cgi?id=627724
for more information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- can not extend schemas that already have paths
- can not form list of schemas that already have paths
- the path of a list schema, if given, must end with ':/'
Ryan pointed out that it's safe to do this because we have the
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag and that it simplifies
how filter functions work.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Since the previous commit, the g_unix_connection_send_credentials() /
g_unix_connection_receive_credentials() functions now also works on
FreeBSD since GUnixCredentialsMessage now works there.
The main idea is that the g_unix_connection_send_credentials() /
g_unix_connection_receive_credentials() functions are the "main" API
for getting credentials (one way or the other). So it's better to
avoid advertising where it is currently implemented.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Otherwise things probably won't work in a garbage-collected world
(consider the trivial GC that never collects garbage).
This commit breaks GDBusServer ABI. No known released software is
using this code.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Rework filter functions as per
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
This commit breaks ABI. However, this ABI break affects only
applications using filter functions. The only known user of is dconf.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Don't actually use this yet as that will require a couple of
modifications to the filter function signature. This is part of the
bug-fix for
https://bugzilla.gnome.org/show_bug.cgi?id=624546#c8
Signed-off-by: David Zeuthen <davidz@redhat.com>
==23341== 65 bytes in 3 blocks are definitely lost in loss record 927 of 1,020
==23341== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==23341== by 0x4057094: g_malloc (gmem.c:134)
==23341== by 0x40573DB: g_malloc_n (gmem.c:281)
==23341== by 0x40717FC: g_strdup (gstrfuncs.c:101)
==23341== by 0x4147F56: value_lcopy_string (gvaluetypes.c:313)
==23341== by 0x4123F0B: g_object_get_valist (gobject.c:1643)
==23341== by 0x41240FF: g_object_get (gobject.c:1731)
==23341== by 0x804C39E: test_basic (gdbus-proxy.c:522)
Bug #628331.
==23341== 85 (24 direct, 61 indirect) bytes in 1 blocks are definitely lost in loss record 900 of 971
==23341== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==23341== by 0x4057094: g_malloc (gmem.c:134)
==23341== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==23341== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==23341== by 0x403A751: g_error_new_valist (gerror.c:54)
==23341== by 0x403AAD4: g_set_error (gerror.c:240)
==23341== by 0x420B807: decode_method_reply (gdbusconnection.c:4774)
==23341== by 0x420C2BA: g_dbus_connection_call_sync (gdbusconnection.c:5188)
==23341== by 0x421B7C9: g_dbus_proxy_call_sync (gdbusproxy.c:2477)
==23341== by 0x804BD89: test_bogus_method_return (gdbus-proxy.c:430)
Bug #628331.
==29535== 56 (24 direct, 32 indirect) bytes in 1 blocks are definitely lost in loss record 1,112 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D63A: test_nonce_tcp (gdbus-peer.c:1229)
==29535== 107 (24 direct, 83 indirect) bytes in 1 blocks are definitely lost in loss record 1,188 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D8E8: test_nonce_tcp (gdbus-peer.c:1259)
==29535== 112 (24 direct, 88 indirect) bytes in 1 blocks are definitely lost in loss record 1,193 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804D79A: test_nonce_tcp (gdbus-peer.c:1248)
==29535== 73 (24 direct, 49 indirect) bytes in 1 blocks are definitely lost in loss record 1,152 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F364: g_slice_copy (gslice.c:858)
==29535== by 0x403A9B2: g_error_copy (gerror.c:160)
==29535== by 0x42066D3: initable_init (gdbusconnection.c:2314)
==29535== by 0x41A73E5: g_initable_init (ginitable.c:105)
==29535== by 0x41A7587: g_initable_new_valist (ginitable.c:218)
==29535== by 0x41A742A: g_initable_new (ginitable.c:138)
==29535== by 0x4206DCC: g_dbus_connection_new_for_address_sync (gdbusconnection.c:2585)
==29535== by 0x804C6CE: test_peer (gdbus-peer.c:803)
Bug #628331.
==6793== 32 (24 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 779 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==6793== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==6793== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==6793== by 0x412372A: g_object_constructor (gobject.c:1482)
==6793== by 0x4122E1D: g_object_newv (gobject.c:1266)
==6793== by 0x4122B93: g_object_new (gobject.c:1178)
==6793== by 0x41DB4F9: g_unix_fd_list_new (gunixfdlist.c:159)
==6793== by 0x804AADD: test_interface_method_call (gdbus-peer.c:172)
Bug #628331.
==4616== 46 (32 direct, 14 indirect) bytes in 1 blocks are definitely lost in loss record 193 of 305
==4616== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==4616== by 0x4057094: g_malloc (gmem.c:134)
==4616== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==4616== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==4616== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==4616== by 0x412372A: g_object_constructor (gobject.c:1482)
==4616== by 0x4123147: g_object_newv (gobject.c:1347)
==4616== by 0x41236BB: g_object_new_valist (gobject.c:1463)
==4616== by 0x4122BB4: g_object_new (gobject.c:1181)
==4616== by 0x41B2D0F: g_network_address_new (gnetworkaddress.c:262)
==4616== by 0x8048A70: test_basic (network-address.c:10)
Bug #628331.
==14059== 96 bytes in 2 blocks are definitely lost in loss record 520 of 543
==14059== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==14059== by 0x4057094: g_malloc (gmem.c:134)
==14059== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==14059== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==14059== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==14059== by 0x411E72A: g_object_constructor (gobject.c:1482)
==14059== by 0x411DE1D: g_object_newv (gobject.c:1266)
==14059== by 0x411DB93: g_object_new (gobject.c:1178)
==14059== by 0x42296AF: _g_local_file_input_stream_new (glocalfileinputstream.c:152)
==14059== by 0x422281F: g_local_file_read (glocalfile.c:1322)
==14059== by 0x418A8A9: open_read_async_thread (gfile.c:5050)
==14059== by 0x41B71BB: run_in_thread (gsimpleasyncresult.c:853)
==14059== by 0x41A5FBC: io_job_thread (gioscheduler.c:181)
==14059== by 0x407DCDE: g_thread_pool_thread_proxy (gthreadpool.c:314)
==14059== by 0x407C6B0: g_thread_create_proxy (gthread.c:1897)
==14059== by 0x57D918: start_thread (pthread_create.c:301)
==14059== by 0x4C6CBD: clone (clone.S:133)
Bug #628331.
==2464== 80 (16 direct, 64 indirect) bytes in 1 blocks are definitely lost in loss record 515 of 547
==2464== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2464== by 0x4057094: g_malloc (gmem.c:134)
==2464== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2464== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2464== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==2464== by 0x411E72A: g_object_constructor (gobject.c:1482)
==2464== by 0x411DE1D: g_object_newv (gobject.c:1266)
==2464== by 0x411DB93: g_object_new (gobject.c:1178)
==2464== by 0x4220D74: _g_local_file_new (glocalfile.c:310)
==2464== by 0x422C897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2464== by 0x41CA91C: g_vfs_get_file_for_path (gvfs.c:94)
==2464== by 0x418C1B6: g_file_new_for_path (gfile.c:5898)
==2464== by 0x8049509: test1_thread (contexts.c:110)
==2464== 80 (16 direct, 64 indirect) bytes in 1 blocks are definitely lost in loss record 516 of 547
==2464== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2464== by 0x4057094: g_malloc (gmem.c:134)
==2464== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2464== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2464== by 0x41385BB: g_type_create_instance (gtype.c:1867)
==2464== by 0x411E72A: g_object_constructor (gobject.c:1482)
==2464== by 0x411DE1D: g_object_newv (gobject.c:1266)
==2464== by 0x411DB93: g_object_new (gobject.c:1178)
==2464== by 0x4220D74: _g_local_file_new (glocalfile.c:310)
==2464== by 0x422C897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2464== by 0x41CA91C: g_vfs_get_file_for_path (gvfs.c:94)
==2464== by 0x418C1B6: g_file_new_for_path (gfile.c:5898)
==2464== by 0x804964D: test_context_independence (contexts.c:144)
Bug #628331.
==2429== 49 (24 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 276 of 355
==2429== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2429== by 0x4057094: g_malloc (gmem.c:134)
==2429== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2429== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2429== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2429== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2429== by 0x4175525: g_buffered_input_stream_read_byte (gbufferedinputstream.c:880)
==2429== by 0x804A21A: test_read_byte (buffered-input-stream.c:153)
Bug #628331.
==2428== 256 bytes in 1 blocks are definitely lost in loss record 591 of 604
==2428== at 0x4005CD2: realloc (vg_replace_malloc.c:476)
==2428== by 0x40571A5: g_realloc (gmem.c:181)
==2428== by 0x4075287: g_string_maybe_expand (gstring.c:395)
==2428== by 0x40760D8: g_string_insert_c (gstring.c:1049)
==2428== by 0x4074D41: g_string_append_c_inline (gstring.h:153)
==2428== by 0x4075B3C: g_string_append_uri_escaped (gstring.c:822)
==2428== by 0x41A46AC: g_icon_to_string_tokenized (gicon.c:164)
==2428== by 0x41A498F: g_icon_to_string (gicon.c:252)
==2428== by 0x8049E1A: test_g_icon_serialize (g-icon.c:222)
Bug #628331.
==12763== 16,777,215 bytes in 1 blocks are possibly lost in loss record 357 of 357
==12763== at 0x4004F1B: calloc (vg_replace_malloc.c:418)
==12763== by 0x405711D: g_malloc0 (gmem.c:157)
==12763== by 0x8048ED6: test_basic (data-output-stream.c:40)
Bug #628331.
==2426== 45,034 bytes in 4,094 blocks are definitely lost in loss record 358 of 361
==2426== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2426== by 0x4057094: g_malloc (gmem.c:134)
==2426== by 0x40573DB: g_malloc_n (gmem.c:281)
==2426== by 0x4071ABD: g_strconcat (gstrfuncs.c:315)
==2426== by 0x804916A: test_read_lines (data-output-stream.c:83)
Bug #628331.
==12351== 45,045 bytes in 4,095 blocks are definitely lost in loss record 377 of 380
==12351== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==12351== by 0x4057094: g_malloc (gmem.c:134)
==12351== by 0x40573DB: g_malloc_n (gmem.c:281)
==12351== by 0x4071ABD: g_strconcat (gstrfuncs.c:315)
==12351== by 0x8049811: test_read_lines (data-input-stream.c:99)
Bug #628331.
==2415== 45,045 bytes in 4,095 blocks are definitely lost in loss record 393 of 399
==2415== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2415== by 0x4057094: g_malloc (gmem.c:134)
==2415== by 0x417FC29: g_data_input_stream_read_line (gdatainputstream.c:797)
==2415== by 0x8049874: test_read_lines (data-input-stream.c:111)
==12088== 360 bytes in 40 blocks are definitely lost in loss record 368 of 381
==12088== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==12088== by 0x4057094: g_malloc (gmem.c:134)
==12088== by 0x417FF4C: g_data_input_stream_read_until (gdatainputstream.c:914)
==12088== by 0x8049B6F: test_read_until (data-input-stream.c:182)
Bug #628331.
==2415== 165 (72 direct, 93 indirect) bytes in 3 blocks are definitely lost in loss record 373 of 399
==2415== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2415== by 0x4057094: g_malloc (gmem.c:134)
==2415== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2415== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2415== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2415== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2415== by 0x417ED29: read_data (gdatainputstream.c:309)
==2415== by 0x417EE9D: g_data_input_stream_read_byte (gdatainputstream.c:344)
==2415== by 0x8049DEC: test_data_array (data-input-stream.c:263)
Bug #628331.
==10395== 80 (24 direct, 56 indirect) bytes in 1 blocks are definitely lost in loss record 529 of 561
==10395== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==10395== by 0x4057094: g_malloc (gmem.c:134)
==10395== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==10395== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==10395== by 0x403A751: g_error_new_valist (gerror.c:54)
==10395== by 0x403AAD4: g_set_error (gerror.c:240)
==10395== by 0x4230328: _g_local_file_output_stream_create (glocalfileoutputstream.c:628)
==10395== by 0x4227A04: g_local_file_create_readwrite (glocalfile.c:1388)
==10395== by 0x418974C: g_file_create_readwrite (gfile.c:1784)
==10395== by 0x8049FCD: test_g_file_create_readwrite (readwrite.c:187)
Bug #628331.
==8564== 24,000,000 bytes in 6 blocks are possibly lost in loss record 592 of 594
==8564== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==8564== by 0x4057094: g_malloc (gmem.c:134)
==8564== by 0x804AA37: test_corruption (converter-stream.c:589)
==8564== by 0x804B05B: test_roundtrip (converter-stream.c:652)
==9459== 25,165,824 bytes in 6 blocks are possibly lost in loss record 593 of 594
==9459== at 0x4005CD2: realloc (vg_replace_malloc.c:476)
==9459== by 0x40571A5: g_realloc (gmem.c:181)
==9459== by 0x41B08A3: array_resize (gmemoryoutputstream.c:501)
==9459== by 0x41B0A5D: g_memory_output_stream_write (gmemoryoutputstream.c:578)
==9459== by 0x41B57EF: g_output_stream_write (goutputstream.c:216)
==9459== by 0x41B591B: g_output_stream_write_all (goutputstream.c:268)
==9459== by 0x417D617: flush_buffer (gconverteroutputstream.c:359)
==9459== by 0x417D958: g_converter_output_stream_write (gconverteroutputstream.c:502)
==9459== by 0x41B5D7F: g_output_stream_real_splice (goutputstream.c:428)
==9459== by 0x41B5C6C: g_output_stream_splice (goutputstream.c:380)
==9459== by 0x804AB10: test_corruption (converter-stream.c:600)
==9785== 25,165,824 bytes in 6 blocks are possibly lost in loss record 592 of 592
==9785== at 0x4005CD2: realloc (vg_replace_malloc.c:476)
==9785== by 0x40571A5: g_realloc (gmem.c:181)
==9785== by 0x41B08A3: array_resize (gmemoryoutputstream.c:501)
==9785== by 0x41B0A5D: g_memory_output_stream_write (gmemoryoutputstream.c:578)
==9785== by 0x41B5D7F: g_output_stream_real_splice (goutputstream.c:428)
==9785== by 0x41B5C6C: g_output_stream_splice (goutputstream.c:380)
==9785== by 0x804ADF1: test_corruption (converter-stream.c:622)
==9785== by 0x804B06C: test_roundtrip (converter-stream.c:652)
Bug #628331.
==7540== 487 (64 direct, 423 indirect) bytes in 2 blocks are definitely lost in loss record 597 of 615
==7540== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==7540== by 0x4057094: g_malloc (gmem.c:134)
==7540== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==7540== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==7540== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==7540== by 0x412372A: g_object_constructor (gobject.c:1482)
==7540== by 0x4123147: g_object_newv (gobject.c:1347)
==7540== by 0x41236BB: g_object_new_valist (gobject.c:1463)
==7540== by 0x41A756E: g_initable_new_valist (ginitable.c:214)
==7540== by 0x41A743E: g_initable_new (ginitable.c:138)
==7540== by 0x417B67A: g_charset_converter_new (gcharsetconverter.c:215)
==7540== by 0x804B043: test_charset (converter-stream.c:675)
Bug #628331.
==2396== 168 (92 direct, 76 indirect) bytes in 1 blocks are definitely lost in loss record 598 of 625
==2396== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2396== by 0x4057094: g_malloc (gmem.c:134)
==2396== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2396== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2396== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==2396== by 0x412372A: g_object_constructor (gobject.c:1482)
==2396== by 0x4123147: g_object_newv (gobject.c:1347)
==2396== by 0x41236BB: g_object_new_valist (gobject.c:1463)
==2396== by 0x4122BB4: g_object_new (gobject.c:1181)
==2396== by 0x417C54D: g_converter_input_stream_new (gconverterinputstream.c:204)
==2396== by 0x804A53E: test_compressor (converter-stream.c:484)
Bug #628331.
==2396== 66 (24 direct, 42 indirect) bytes in 1 blocks are definitely lost in loss record 565 of 625
==2396== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2396== by 0x4057094: g_malloc (gmem.c:134)
==2396== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2396== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2396== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2396== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2396== by 0x417BA38: g_charset_converter_convert (gcharsetconverter.c:344)
==2396== by 0x417BF67: g_converter_convert (gconverter.c:174)
==2396== by 0x417C9EB: g_converter_input_stream_read (gconverterinputstream.c:403)
==2396== by 0x41A7A17: g_input_stream_read (ginputstream.c:204)
==2396== by 0x41A7B43: g_input_stream_read_all (ginputstream.c:256)
==2396== by 0x804B0E4: test_charset (converter-stream.c:682)
Bug #628331.
==2396== 39 (24 direct, 15 indirect) bytes in 1 blocks are definitely lost in loss record 398 of 625
==2396== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2396== by 0x4057094: g_malloc (gmem.c:134)
==2396== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2396== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2396== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2396== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2396== by 0x80498F7: g_compressor_converter_convert (converter-stream.c:244)
==2396== by 0x417BF67: g_converter_convert (gconverter.c:174)
==2396== by 0x417CBDE: g_converter_input_stream_read (gconverterinputstream.c:460)
==2396== by 0x41A7A17: g_input_stream_read (ginputstream.c:204)
==2396== by 0x804A832: test_compressor (converter-stream.c:545)
Bug #628331.
==2395== 64 bytes in 1 blocks are definitely lost in loss record 381 of 407
==2395== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2395== by 0x4005C66: realloc (vg_replace_malloc.c:476)
==2395== by 0x40571A5: g_realloc (gmem.c:181)
==2395== by 0x401D670: g_ptr_array_maybe_expand (garray.c:968)
==2395== by 0x401DD0B: g_ptr_array_add (garray.c:1225)
==2395== by 0x4199AA9: g_file_info_list_attributes (gfileinfo.c:646)
==2395== by 0x80491CE: test_g_file_info (g-file-info.c:76)
==2395== 132 (64 direct, 68 indirect) bytes in 1 blocks are definitely lost in loss record 396 of 407
==2395== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2395== by 0x4005C66: realloc (vg_replace_malloc.c:476)
==2395== by 0x40571A5: g_realloc (gmem.c:181)
==2395== by 0x401D670: g_ptr_array_maybe_expand (garray.c:968)
==2395== by 0x401DD0B: g_ptr_array_add (garray.c:1225)
==2395== by 0x4199A82: g_file_info_list_attributes (gfileinfo.c:642)
==2395== by 0x80492B7: test_g_file_info (g-file-info.c:86)
Bug #628331.
And use g_assert_[no_]error().
==2392== 49 (24 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 451 of 573
==2392== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2392== by 0x4057094: g_malloc (gmem.c:134)
==2392== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2392== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2392== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2392== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2392== by 0x41B7619: g_output_stream_set_pending (goutputstream.c:1198)
==2392== by 0x41B5799: g_output_stream_write (goutputstream.c:210)
==2392== by 0x41B590B: g_output_stream_write_all (goutputstream.c:268)
==2392== by 0x8049B54: verify_iostream (readwrite.c:110)
Bug #628331.
==2392== 38 (16 direct, 22 indirect) bytes in 1 blocks are definitely lost in loss record 369 of 573
==2392== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2392== by 0x4057094: g_malloc (gmem.c:134)
==2392== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2392== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2392== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==2392== by 0x412372A: g_object_constructor (gobject.c:1482)
==2392== by 0x4122E1D: g_object_newv (gobject.c:1266)
==2392== by 0x4122B93: g_object_new (gobject.c:1178)
==2392== by 0x4225D74: _g_local_file_new (glocalfile.c:310)
==2392== by 0x4231897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2392== by 0x41CF91C: g_vfs_get_file_for_path (gvfs.c:94)
==2392== by 0x41911B6: g_file_new_for_path (gfile.c:5898)
==2392== by 0x804A2B9: test_g_file_replace_readwrite (readwrite.c:235)
Bug #628331.
==2392== 38 (16 direct, 22 indirect) bytes in 1 blocks are definitely lost in loss record 368 of 573
==2392== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2392== by 0x4057094: g_malloc (gmem.c:134)
==2392== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2392== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2392== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==2392== by 0x412372A: g_object_constructor (gobject.c:1482)
==2392== by 0x4122E1D: g_object_newv (gobject.c:1266)
==2392== by 0x4122B93: g_object_new (gobject.c:1178)
==2392== by 0x4225D74: _g_local_file_new (glocalfile.c:310)
==2392== by 0x4231897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2392== by 0x41CF91C: g_vfs_get_file_for_path (gvfs.c:94)
==2392== by 0x41911B6: g_file_new_for_path (gfile.c:5898)
==2392== by 0x8049F23: test_g_file_create_readwrite (readwrite.c:183)
Bug #628331.
==2392== 38 (16 direct, 22 indirect) bytes in 1 blocks are definitely lost in loss record 367 of 573
==2392== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2392== by 0x4057094: g_malloc (gmem.c:134)
==2392== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2392== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2392== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==2392== by 0x412372A: g_object_constructor (gobject.c:1482)
==2392== by 0x4122E1D: g_object_newv (gobject.c:1266)
==2392== by 0x4122B93: g_object_new (gobject.c:1178)
==2392== by 0x4225D74: _g_local_file_new (glocalfile.c:310)
==2392== by 0x4231897: g_local_vfs_get_file_for_path (glocalvfs.c:84)
==2392== by 0x41CF91C: g_vfs_get_file_for_path (gvfs.c:94)
==2392== by 0x41911B6: g_file_new_for_path (gfile.c:5898)
==2392== by 0x8049E30: test_g_file_open_readwrite (readwrite.c:153)
Bug #628331.
==2389== 84 (44 direct, 40 indirect) bytes in 1 blocks are definitely lost in loss record 299 of 315
==2389== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2389== by 0x4057094: g_malloc (gmem.c:134)
==2389== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2389== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2389== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==2389== by 0x412372A: g_object_constructor (gobject.c:1482)
==2389== by 0x4122E1D: g_object_newv (gobject.c:1266)
==2389== by 0x4122B93: g_object_new (gobject.c:1178)
==2389== by 0x41AF54C: g_memory_input_stream_new (gmemoryinputstream.c:199)
==2389== by 0x8048BD1: test_read_chunks (memory-input-stream.c:40)
Bug #628331.
==2389== 59 (24 direct, 35 indirect) bytes in 1 blocks are definitely lost in loss record 290 of 315
==2389== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2389== by 0x4057094: g_malloc (gmem.c:134)
==2389== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==2389== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==2389== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==2389== by 0x403AC31: g_set_error_literal (gerror.c:314)
==2389== by 0x41AFD15: g_memory_input_stream_truncate (gmemoryinputstream.c:517)
==2389== by 0x41BAC0F: g_seekable_truncate (gseekable.c:174)
==2389== by 0x8049595: test_truncate (memory-input-stream.c:123)
Bug #628331.
==2530== 13 bytes in 1 blocks are definitely lost in loss record 373 of 681
==2530== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==2530== by 0x4057094: g_malloc (gmem.c:134)
==2530== by 0x40573DB: g_malloc_n (gmem.c:281)
==2530== by 0x40717FC: g_strdup (gstrfuncs.c:101)
==2530== by 0x4147F56: value_lcopy_string (gvaluetypes.c:313)
==2530== by 0x4123F0B: g_object_get_valist (gobject.c:1643)
==2530== by 0x41240FF: g_object_get (gobject.c:1731)
==2530== by 0x804A4BA: test_basic (gsettings.c:28)
Bug #628331.
Don't leak the ptr arrays in the map_sender_unique_name_to_signal_data_array
hash table.
==23440== 84 (20 direct, 64 indirect) bytes in 1 blocks are definitely lost in loss record 920 of 993
==23440== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==23440== by 0x4057094: g_malloc (gmem.c:134)
==23440== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==23440== by 0x401D2D0: g_ptr_array_sized_new (garray.c:799)
==23440== by 0x401D2AC: g_ptr_array_new (garray.c:783)
==23440== by 0x420834A: g_dbus_connection_signal_subscribe (gdbusconnection.c:3084)
Bug #628436.
==31063== 98 (24 direct, 74 indirect) bytes in 1 blocks are definitely lost in loss record 946 of 1,136
==31063== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==31063== by 0x4057094: g_malloc (gmem.c:134)
==31063== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==31063== by 0x4092383: g_variant_get_child_value (gvariant-core.c:847)
==31063== by 0x408BE9E: g_variant_get_variant (gvariant.c:709)
==31063== by 0x40903F5: g_variant_valist_get_nnp (gvariant.c:3767)
==31063== by 0x40907A9: g_variant_valist_get_leaf (gvariant.c:3884)
==31063== by 0x4090D10: g_variant_valist_get (gvariant.c:4065)
==31063== by 0x4090E59: g_variant_valist_get (gvariant.c:4100)
==31063== by 0x40911B6: g_variant_get_va (gvariant.c:4296)
==31063== by 0x40910BC: g_variant_get (gvariant.c:4248)
==31063== by 0x4208DAF: invoke_set_property_in_idle_cb (gdbusconnection.c:3676)
Bug #628346.
... and use g_error_matches().
==29535== 1,360 (408 direct, 952 indirect) bytes in 17 blocks are definitely lost in loss record 1,252 of 1,264
==29535== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==29535== by 0x4057094: g_malloc (gmem.c:134)
==29535== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==29535== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==29535== by 0x403A751: g_error_new_valist (gerror.c:54)
==29535== by 0x403AAD4: g_set_error (gerror.c:240)
==29535== by 0x41C06C8: g_socket_send_message (gsocket.c:2967)
==29535== by 0x421CB64: write_message_continue_writing (gdbusprivate.c:958)
==29535== by 0x421CE2A: write_message_async (gdbusprivate.c:1049)
==29535== by 0x421D4DD: maybe_write_next_message (gdbusprivate.c:1291)
==29535== by 0x421D26B: message_written (gdbusprivate.c:1187)
==29535== by 0x421D322: write_message_cb (gdbusprivate.c:1216)
Bug #628345.
Don't call LoadLibrary() on shell32.dll or kernel32.dll. kernel32.dll
is always loaded. Shell32.dll is also already loaded as glib links to
functions in it. So just call GetModuleHandle() on them.
For mlang.dll in win_iconv.c and winhttp.dll in gwinhttpvfs.c, always
try loading them from a complete path, from the Windows system
directory.
Use the "tool help" API to enumerate modules in gmodule-win32.c. It is
present in all Windows versions since Windows 2000, which is all we
support anyway. Thus no need to look that API up dynamically. Just
link to it normally. We can bin the fallback code that attempts to use
the psapi API.
Looks like we forgot to ref the returned GVariant in
g_dbus_proxy_call_finish().
It's a good question why code using g_dbus_proxy_call() and
g_dbus_proxy_call_finish() worked in the first place - probably the
answer is that no-one really used these APIs.
Signed-off-by: David Zeuthen <davidz@redhat.com>
==6793== 32 (24 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 780 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==6793== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==6793== by 0x413D5BB: g_type_create_instance (gtype.c:1867)
==6793== by 0x412372A: g_object_constructor (gobject.c:1482)
==6793== by 0x4122E1D: g_object_newv (gobject.c:1266)
==6793== by 0x4122B93: g_object_new (gobject.c:1178)
==6793== by 0x41DB582: g_unix_fd_list_new_from_array (gunixfdlist.c:191)
==6793== by 0x421BFD6: _g_dbus_worker_do_read_cb (gdbusprivate.c:590)
Bug #628329.
==8221== 1,047 (672 direct, 375 indirect) bytes in 28 blocks are definitely lost in loss record 589 of 603
==8221== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==8221== by 0x4057094: g_malloc (gmem.c:134)
==8221== by 0x406F2D6: g_slice_alloc (gslice.c:836)
==8221== by 0x406F31B: g_slice_alloc0 (gslice.c:848)
==8221== by 0x403A8A6: g_error_new_literal (gerror.c:117)
==8221== by 0x403AC31: g_set_error_literal (gerror.c:314)
==8221== by 0x80499DC: g_compressor_converter_convert (converter-stream.c:267)
==8221== by 0x417BF67: g_converter_convert (gconverter.c:174)
==8221== by 0x417D7F0: g_converter_output_stream_write (gconverteroutputstream.c:428)
==8221== by 0x41B57DF: g_output_stream_write (goutputstream.c:216)
==8221== by 0x804A367: test_compressor (converter-stream.c:456)
Bug #628309.
==6793== 19 (8 direct, 11 indirect) bytes in 1 blocks are definitely lost in loss record 640 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x40573DB: g_malloc_n (gmem.c:281)
==6793== by 0x4073D1B: g_strsplit (gstrfuncs.c:2436)
==6793== by 0x4224A89: initable_init (gdbusserver.c:1040)
==6793== by 0x41A73F9: g_initable_init (ginitable.c:105)
==6793== by 0x41A759B: g_initable_new_valist (ginitable.c:218)
==6793== by 0x41A743E: g_initable_new (ginitable.c:138)
==6793== by 0x42238F5: g_dbus_server_new_sync (gdbusserver.c:484)
Bug #628328.
==6793== 16 bytes in 1 blocks are definitely lost in loss record 632 of 1,423
==6793== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==6793== by 0x4057094: g_malloc (gmem.c:134)
==6793== by 0x417FC29: g_data_input_stream_read_line (gdatainputstream.c:797)
==6793== by 0x41F99C1: _my_g_data_input_stream_read_line (gdbusauth.c:279)
==6793== by 0x41FA728: _g_dbus_auth_run_client (gdbusauth.c:759)
Bug #628327.
Turns out we are leaking non-floating GVariant instances returned by
get_property() functions.
Also avoid imprecise language such as "newly-allocated GVariant" as
this doesn't specify whether the variant can be floating or not.
Also see https://bugzilla.gnome.org/show_bug.cgi?id=627974 as it is
very related to this change.
Signed-off-by: David Zeuthen <davidz@redhat.com>
... that is, make it private. This makes sense because users are never
expected to create such objects themselves - only the GDBus core will
need this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Allow modifying a GDBusMessage in a filter function and also add tests
for this. This breaks API but leaves ABI (almost) intact - at least
dconf's GSettings backend (the only big user I know of) will keep
working.
https://bugzilla.gnome.org/show_bug.cgi?id=624546
Signed-off-by: David Zeuthen <davidz@redhat.com>
This allow application to take control over certain proxy protocol
handling. When a proxy protocol must be used and is found in the
application proxies, GSocketClient will simply TCP connect to the proxy
server and return the connection.
Reviewed-by: Dan Winship <danw@gnome.org>
Using this rather than g_socket_client_connect() or
g_socket_client_connect_to_host() allows #GSocketClient to
determine when to use application-specific proxy protocols.
Reviewed-by: Dan Winship <danw@gnome.org>
This functionnallity can be disabled using property enable-proxy. It
enumerates addresses using GSocketConnectable::proxy_enumerate() instead of
enumerate(). When the returned address is of type GProxyAddress (a type
based on GInetSocketAddress), it gets the proxy protocol handler using
g_proxy_get_default_for_protocol() and call connect() on it.
Reviewed-by: Dan Winship <danw@gnome.org>
This class inherit from GTcpConnection by refing the socket of
an existing GTcpConnection and wraps a custom GIOStream into itself. This
is to allow implementing proxies that alters data stream, like when using
GSSAPI privacy inside SOCKS5.
This way, if g_socket_connect() is called with a GProxyAddress,
g_socket_get_remote_address() will later return that same address.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.co.uk>
This patch implements method proxy_enumerate from GSocketConnectable for
all connectables (GNetworkAddress, GNetworkService, GInetSocketAddress
and GUnixSocketAddress).
Reviewed-by: Dan Winship <danw@gnome.org>
An implementation of GSocketAddressEnumerator that handles proxy
enumeration. This class is mainly usefull for Connectables implementation
such as NetworkService, NetworkAddress and SocketAddress to handle proxies.
Reviewed-by: Dan Winship <danw@gnome.org>
Implement an extension point for proxy protocol implementation. This
is mainly useful for socket-based proxy where it is possible to use the
proxied socket the same way it would for other stream based socket.
Reviewed-by: Dan Winship <danw@gnome.org>
This method allow creating a network address from a URI. If no port is
found in the URI, the default_port parameter will be used. Note that new
property scheme is there for future TLS implementation.
Reviewed-by: Dan Winship <danw@gnome.org>
A GSocketInetAddress representing the proxy server address with additional
properties proxy type, destination address and port, username and password.
Reviewed-by: Dan Winship <danw@gnome.org>
This extension point allow extending GLib with library like LibProxy that
interprets system proxy settings and finds the appropriate configuration
based on the type of connection being made.
Reviewed-by: Dan Winship <danw@gnome.org>
This is really what (API) users expect from GDBusProxy - in
particular, mclasen and I ran into this problem while debugging a
upower issue, see
https://bugzilla.redhat.com/show_bug.cgi?id=624125
In a nutshell, the problem is that polkitd crashes while upower holds
a PolkitAuthority object (which in turns contains a GDBusProxy for the
well-known name org.freedesktop.PolicyKit1). This means that
subsequent calls on the PolkitAuthority (which is translated into
calls into the GDBusProxy) fails since :g-name-owner is NULL.
With this fix, we'll be requesting the bus daemon to launch polkitd
since we will start calling into org.freedesktop.PolicyKit1 as soon as
we notice that there is no owner for this name.
Unfortunately our test suite doesn't cover service activation so there
is no way to reliably test this. I will file a bug about this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Free the read buffer.
==26538== 4,096 bytes in 1 blocks are definitely lost in loss record 781 of 781
==26538== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==26538== by 0x4005C66: realloc (vg_replace_malloc.c:476)
==26538== by 0x405244D: g_realloc (gmem.c:181)
==26538== by 0x420E066: _g_dbus_worker_do_read_unlocked (gdbusprivate.c:780)
==26538== by 0x420E1D1: _g_dbus_worker_do_read (gdbusprivate.c:812)
==26538== by 0x420F14A: _g_dbus_worker_thread_begin_func (gdbusprivate.c:1318)
==26538== by 0x420D2ED: invoke_caller (gdbusprivate.c:266)
==26538== by 0x404DA7C: g_idle_dispatch (gmain.c:4224)
==26538== by 0x4049FCD: g_main_dispatch (gmain.c:2119)
==26538== by 0x404B2C1: g_main_context_dispatch (gmain.c:2672)
==26538== by 0x404B716: g_main_context_iterate (gmain.c:2750)
==26538== by 0x404BE7F: g_main_loop_run (gmain.c:2958)
==26538== by 0x420D2B5: shared_thread_func (gdbusprivate.c:248)
==26538== by 0x4077958: g_thread_create_proxy (gthread.c:1897)
==26538== by 0x57D918: start_thread (pthread_create.c:301)
==26538== by 0x4C6CBD: clone (clone.S:133)
Bug #627187.
==26538== 145 (24 direct, 121 indirect) bytes in 1 blocks are definitely lost in loss record 765 of 790
==26538== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==26538== by 0x405233C: g_malloc (gmem.c:134)
==26538== by 0x406A57E: g_slice_alloc (gslice.c:836)
==26538== by 0x406A60C: g_slice_copy (gslice.c:858)
==26538== by 0x4035C5A: g_error_copy (gerror.c:160)
==26538== by 0x41B6387: g_simple_async_result_set_from_error (gsimpleasyncresult.c:638)
==26538== by 0x41FCDEB: g_dbus_connection_call_done (gdbusconnection.c:4808)
==26538== by 0x41B682E: g_simple_async_result_complete (gsimpleasyncresult.c:762)
==26538== by 0x41B686A: complete_in_idle_cb (gsimpleasyncresult.c:772)
==26538== by 0x404DA7C: g_idle_dispatch (gmain.c:4224)
==26538== by 0x4049FCD: g_main_dispatch (gmain.c:2119)
==26538== by 0x404B2C1: g_main_context_dispatch (gmain.c:2672)
==26538== by 0x404B716: g_main_context_iterate (gmain.c:2750)
==26538== by 0x404BE7F: g_main_loop_run (gmain.c:2958)
==26538== by 0x804B5CC: test_connection_send (gdbus-connection.c:407)
==26538== by 0x4073D04: test_case_run (gtestutils.c:1174)
Bug #627187.
==25403== 49 (24 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 603 of 787
==25403== at 0x4005BDC: malloc (vg_replace_malloc.c:195)
==25403== by 0x405233C: g_malloc (gmem.c:134)
==25403== by 0x406A57E: g_slice_alloc (gslice.c:836)
==25403== by 0x406A5C3: g_slice_alloc0 (gslice.c:848)
==25403== by 0x4035B4E: g_error_new_literal (gerror.c:117)
==25403== by 0x4035ED9: g_set_error_literal (gerror.c:314)
==25403== by 0x41F6434: g_dbus_connection_close_sync (gdbusconnection.c:1284)
==25403== by 0x804A861: test_connection_life_cycle (gdbus-connection.c:158)
==25403== by 0x4073D04: test_case_run (gtestutils.c:1174)
==25403== by 0x4073FC2: g_test_run_suite_internal (gtestutils.c:1223)
==25403== by 0x4074077: g_test_run_suite_internal (gtestutils.c:1233)
==25403== by 0x4074077: g_test_run_suite_internal (gtestutils.c:1233)
==25403== by 0x40741FB: g_test_run_suite (gtestutils.c:1274)
==25403== by 0x40733E5: g_test_run (gtestutils.c:877)
==25403== by 0x804DC92: main (gdbus-connection.c:1024)
Bug #627187.
Add GZlibCompressor:file-info property. If it contains a non-NULL
GFileInfo, and the compressor is in GZIP mode, the filename and
modification time from the file info are written to the GZIP header
in the output data.
Add GZlibDeompressor:file-info property. If the decompressor is in GZIP
mode, and the GZIP data contains a GZIP header, the filename and
modification time are read from it, stored in a GFileInfo, and the
file-info property is notified.
Bug #617691.
This patch guarantees that g_output_stream_write() can never fail with
G_IO_ERROR_WOULD_BLOCK. Without such a guarantee, we would need some
kind of GIOPollable interface or some way to get an event when the
stream is writable again. Which is mostly useless considering that
this method is asynchronous anyway.
Note: this patch just codifies existing behavior - GUnixOutputStream,
GSocketOutputStream and other implementations already work this way.
See also bug 626748 comment 5 for how the GDBus code relies on this
guarantee.
https://bugzilla.gnome.org/show_bug.cgi?id=627071
Signed-off-by: David Zeuthen <davidz@redhat.com>
If sending a lot of data and/or the other peer is not reading it, then
socket buffers can overflow. This is communicated from the kernel by
returning EAGAIN. In GIO, it is modelled by g_output_stream_write()
and g_socket_send_message() returning G_IO_ERROR_WOULD_BLOCK.
It is also problematic that that we're using synchronous IO in the
shared GDBus IO thread. It means that one GDBusConnection can lock up
others.
It turns out that by porting from g_output_stream_write() to
g_output_stream_write_async() we fix the EAGAIN issue. For GSocket, we
still need to handle things manually (by creating a GSource) as
g_socket_send_message() is used.
We check the new behavior in Michael's producer/consumer test case (at
/gdbus/overflow in gdbus-peer.c) added in the last commit.
Also add a test case that sends and receives a 20 MiB message.
Also add a new `transport' G_DBUS_DEBUG option so it is easy to
inspect partial writes:
$ G_DBUS_DEBUG=transport ./gdbus-connection -p /gdbus/connection/large_message
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 0 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 128000 on a GSocketOutputStream
========================================================================
GDBus-debug:Transport:
>>>> WROTE 128000 bytes of message with serial 4 and
size 20971669 from offset 256000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
>>>> WROTE 43669 bytes of message with serial 4 and
size 20971669 from offset 20928000 on a GSocketOutputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 16 bytes of message with serial 3 and
size 20971620 to offset 0 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 15984 bytes of message with serial 3 and
size 20971620 to offset 16 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 16000 bytes of message with serial 3 and
size 20971620 to offset 16000 from a GSocketInputStream
[...]
========================================================================
GDBus-debug:Transport:
<<<< READ 144000 bytes of message with serial 3 and
size 20971620 to offset 20720000 from a GSocketInputStream
========================================================================
GDBus-debug:Transport:
<<<< READ 107620 bytes of message with serial 3 and
size 20971620 to offset 20864000 from a GSocketInputStream
OK
https://bugzilla.gnome.org/show_bug.cgi?id=626748
Signed-off-by: David Zeuthen <davidz@redhat.com>
This patch fixes this problem
Syscall param socketcall.sendmsg(msg.msg_control) points to uninitialised byte(s)
at 0x3D5B00EA60: __sendmsg_nocancel (syscall-template.S:82)
by 0x53F9790: g_socket_send_message (gsocket.c:2918)
by 0x540FDD0: g_unix_connection_send_credentials (gunixconnection.c:351)
by 0x542B93F: _g_dbus_auth_run_client (gdbusauth.c:618)
by 0x5438001: initable_init (gdbusconnection.c:2191)
by 0x53E09CC: g_initable_init (ginitable.c:105)
by 0x543F6E9: g_bus_get_sync (gdbusconnection.c:6091)
by 0x402C7E: test_connection_life_cycle (gdbus-connection.c:126)
by 0x4C7CABB: test_case_run (gtestutils.c:1174)
by 0x4C7CD84: g_test_run_suite_internal (gtestutils.c:1223)
by 0x4C7CE49: g_test_run_suite_internal (gtestutils.c:1233)
by 0x4C7CE49: g_test_run_suite_internal (gtestutils.c:1233)
Address 0x7fefff9fc is on thread 1's stack
Signed-off-by: David Zeuthen <davidz@redhat.com>
Previously if a GSocketConnection had a blocking GSocket, it would
sometimes block during asynchonous I/O, and if it had a non-blocking
socket, it would sometimes return G_IO_ERROR_WOULD_BLOCK from
synchronous I/O. This fixes the connection to not depend on the socket
state.
https://bugzilla.gnome.org/show_bug.cgi?id=616458
g_socket_client_connect_async() was always leaking its GCancellable,
and would also leak any GSocket that eventually failed to connect
after returning G_IO_ERROR_PENDING.
GSocket has a timeout flag now, but when using GSocketClient there was
no way to set the timeout until after connecting (or failing). Fix
that by adding a timeout property to GSocketClient.
Because g_simple_async_report_[g]error_in_idle() don't take a source tag
parameter, code that uses them can't currently use
g_simple_async_result_is_valid() (at least, not for the error case).
Bug 602417
The GClosure API is a bit funky (and badly documented), and requires
you to set a marshaller on the closure, and the marshaller has an
implicit 'this' argument, and the caller is reponsible for unsetting
the values after invoking the closure.
I've added some calls of the _with_closures variants to the
gdbus-names test now.
This prints all GDBusMethodInvocation API usage and is normally used
with the `incoming' option. Example:
# G_DBUS_DEBUG=incoming,return ./polkitd --replace
Entering main event loop
Connected to the system bus
Registering null backend at priority -10
[...]
Acquired the name org.freedesktop.PolicyKit1
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.26
serial 299
========================================================================
GDBus-debug:Return:
>>>> METHOD ERROR org.freedesktop.PolicyKit1.Error.Failed
message `Cannot determine session the caller is in'
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.26
reply-serial 299
[...]
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.2402
serial 25
========================================================================
GDBus-debug:Return:
>>>> METHOD RETURN
in response to org.freedesktop.PolicyKit1.Authority.RegisterAuthenticationAgent()
on object /org/freedesktop/PolicyKit1/Authority
to name :1.2402
reply-serial 25
Signed-off-by: David Zeuthen <davidz@redhat.com>
The D-Bus spec mentions exactly what header fields are required for
various message types. Add tests for this as well.
Also disallow empty interfaces for signals since the D-Bus spec says
this is Verboten already.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also use this in the test cases to check that serialization to and
from both big and little endian works.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We use g_assert() instead of setting the GError because it is a
programming error if the GVariant contains invalid data - see commit
5e6f762d61 for where the last hole in
GVariant was closed.
So if we can trust GVariant to only contain valid data (ignoring the
case where unsafe API such as g_variant_new_from_data() is used), why
g_assert() at all with costly g_utf8_validate() checks? Because a) it
is relatively inexpensive; and b) it helps find bugs such as the one
fixed in commit 5e6f762d61.
If performance is a concern we can play games like introducing
environment variables or other machinery to avoid such "costly"
checks. I doubt it will ever be an issue.
Also replace two "Hmm" TODO item with a static assert - the code that
serializes a gdouble into the D-Bus wire format by treating it as a
guint64 is indeed correct - endianess needs to be taken into account
(see the D-Bus reference implementation for similar code). But we want
to make sure that we're indeed using an architecture/compiler where a
gdouble takes up 8 bytes - hence the assertion.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Spell out "RECEIVED SIGNAL" instead of "SIGNAL" to emphasize this is
about receiving a signal, not emitting one (which is "SIGNAL
EMISSION"). Also make the "arrows" point in the "right" direction
("<<<<" vs ">>>>") - like this:
========================================================================
GDBus-debug:Signal:
<<<< RECEIVED SIGNAL org.freedesktop.DBus.NameOwnerChanged
on object /org/freedesktop/DBus
sent by name org.freedesktop.DBus
and
========================================================================
GDBus-debug:Incoming:
<<<< METHOD INVOCATION org.freedesktop.PolicyKit1.Authority.EnumerateTemporaryAuthorizations()
on object /org/freedesktop/PolicyKit1/Authority
invoked by name :1.2176
Signed-off-by: David Zeuthen <davidz@redhat.com>
Commit 5e6f762d61 (introducing UTF-8
validity checks for GVariant instances containing strsings) actually
uncovered a bug in glib-compile-schemas - a GString was passed when a
C string was expected.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This should make things easier to debug:
g_dbus_connection_real_closed: Remote peer vanished with error:
Underlying GIOStream returned 0 bytes on an async read
(g-io-error-quark, 0). Exiting.
Signed-off-by: David Zeuthen <davidz@redhat.com>
the FdSource was calling g_cancellable_disconnect while holding the
main context lock, which is bad news if the ::cancelled handler is
trying to get that lock to wake up the mainloop...
Bug 586432
When binding a boolean setting to a boolean property, invert the values.
This avoids the requirement for writing a pair of mapping functions for
this extremely common case.
Add a test.
https://bugzilla.gnome.org/show_bug.cgi?id=625833
Don't do too much work in the finalizer - in particular, there's no
need to send RemoveMatch() messages to the bus daemon since we're
going to sever the connection and the bus will garbage collect
anyway. In this case it crashed the process.
Also add a test case that checks that the appropriate GDestroyNotify
callbacks are called when unreffing a connection with either 1)
exported objects; 2) signal subscriptions or 3) filter functions
.. yes, ideally apps would unregister such callbacks before giving up
their ref but that's not how things work :-)
Signed-off-by: David Zeuthen <davidz@redhat.com>
Otherwise e.g. setuid root processes can't connect to the system
bus. This was discovered when porting PolicyKit's pkexec(1) command to
a PolicyKit library using GDBus.
Signed-off-by: David Zeuthen <davidz@redhat.com>
You can drop a key-file in the schema directory that looks like:
[org.gtk.Example]
key='value'
to override the default value of 'key' in schema 'org.gtk.Example'.
- Make GCredentials instance and class structures private so it can't
be subclassed and we don't have to worry about ABI compat
issues. This also allows us to get rid of the GCredentialsPrivate
struct.
- Add a GCredentialsType enumeration that is used whenever exchanging
pointers with the user. This allows us to support OSes with
multiple native credential types. In particular, it allows
supporting OSes where the native credential evolves or even changes
over time.
- Add g_socket_get_credentials() method.
- Add tests for g_socket_get_credentials(). Right now this is in the
GDBus peer-to-peer test case but we can change that later.
- Move GTcpConnection into a separate gtk-doc page as was already
half-done with GUnixConnection. Also finish the GUnixConnection
move and ensure send_credentials() and receive_credentials()
methods are in the docs. Also nuke comment about GTcpConnection
being empty compared to its superclass.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this fix, we'd sometimes run code after stop() and finalize()
to handle incoming requests. This was observed in the gdbus-peer test
case occasionally crashing:
$ ./gdbus-peer
/gdbus/peer-to-peer: OK
/gdbus/delayed-message-processing: OK
/gdbus/nonce-tcp:
GLib-GObject-WARNING **: invalid uninstantiatable type `(null)' in cast to `GDBusServer'
aborting...
Signed-off-by: David Zeuthen <davidz@redhat.com>
This allows sending and receiving D-Bus messages with instances of the
'h' D-Bus type. Unlike libdbus-1's dbus_message_iter_get_basic()
method, g_variant_get_handle() does not return a duplicated unix file
descriptor (that must be closed with close(2)) - instead, it returns
an index that can be used to get/dup the file descriptor from a
GUnixFDList object that can be obtained from the GDBusMessage object.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Until after we include the glib stuff, so that we have G_OS_UNIX
defined.
For some reason <stdlib.h> pulls in <sys/wait.h> on Fedora so this
wasn't a problem, but many others have reported the issue.
This is preferable to the current magical solution whereby the serial
is only rewritten if non-zero. In particular, it makes it easier to
send the same message on multiple connections without having to reset
the serial number.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but might be useful in the future. For
example, it might be nice with a way to bypass the current queue of
outgoing messages - having a flag enumeration allows us to add a
G_DBUS_SEND_MESSAGE_FLAGS_BYPASS_QUEUE etc. etc.
This commit breaks ABI and API. Users of the (rarely used) API to send
messages will have to port to this new API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is currently unused but will probably be useful in the
future. For example, we could have a _ARG0_IS_PATH to specify that
arg0 should be used for arg0path.
This commit breaks API and ABI. Users of
g_dbus_connection_signal_subscribe() will need to port to this new
version.
Signed-off-by: David Zeuthen <davidz@redhat.com>
If the subtree introspection function indicates that an interface exists
but then the dispatch function returns a NULL vtable for that interface,
issue a g_warning pointing programmers in the right direction.
Just because SOCK_CLOEXEC was defined at build time doesn't mean the
kernel we're running on supports it. So if socket() fails with EINVAL,
try again without the flag.
https://bugzilla.gnome.org/show_bug.cgi?id=624463
Clarify a couple of things in the docs:
1) you must return flat names (no slashes)
2) g_strfreev() will be called on the result
3) a benefit of using the DISPATCH_TO_UNENUMERATED flag
Return a NULL terminated C array instead of a GPtrArray
Also, document that %NULL is a permitted return value and clarify its
meaning.
Finally, avoid calling the enumeration function during dispatch when the
G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES flag was given.
... so it is async, cancelable and returns an error. Also provide a
synchronous version.
This is an API/ABI break but it is expected that only very few
applications use this API.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Callers who are using g_application_unregistered_try_new are
likely wanting to continue doing something else if _register()
fails. Change the semantics so that passing register=FALSE
unsets default-quit as well. This means that a later _register()
call will send Activate but continue the process.
https://bugzilla.gnome.org/show_bug.cgi?id=622005
Following the behaviour of ls here, we should return at least the
file name, if we can't get any other information about a file. To
do this, handle EACCESS on stat() calls.
Patch by Tomas Bzatek, see bug 623692
- add G_VARIANT_TYPE_BYTESTRING, _BYTESTRING_ARRAY, _STRING_ARRAY
- remove g_variant_{new,get}_byte_array functions
- add g_variant_{new,get,dup}_bytestring{,_array} functions
- remove undocumented support for deserialising arrays of objectpaths
or signature strngs using g_variant_get_strv()
- add and document new format strings '^ay', '^&ay', '^aay' and '^a&ay'
- update GApplication to use the new API
- update GSettings binding code to use the new API
- add tests
E.g. move these C structures out of public header files and into their
respective C files. Also nuke padding since this is no longer needed.
This leaves only GDBusProxy as an extendable type.
Signed-off-by: David Zeuthen <davidz@redhat.com>
While this a dangerous thing to allow (collissions, reply_serial not
matching up etc.), the added flexibility makes this a good trade-off -
for example, with this feature, it's now a lot easier to build message
routers.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also emit GDBusProxy::g-properties-changed when dropping (when the
name owner vanishes) or populating (when loading properties) the
property cache.
https://bugzilla.gnome.org/show_bug.cgi?id=623538
Signed-off-by: David Zeuthen <davidz@redhat.com>
Also add a 'address' G_DBUS_DEBUG option that will print out useful
debug information such as
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14542: Autolaunch enabled (using X11).
14542: --exit-with-session automatically enabled
14542: Connected to X11 display ':0.0'
14542: === Parent dbus-launch continues
14542: Waiting for babysitter's intermediate parent
14542: Reading address from bus
14542: Reading PID from daemon
14542: Saving x11 address
14542: Created window 88080385
14542: session file: /root/.dbus/session-bus/05e508961149264c9b750a4c494aa6f7-0
14542: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
and
GDBus-debug:Address: In g_dbus_address_get_for_bus_sync() for bus type `session'
GDBus-debug:Address: env var DBUS_SESSION_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_SYSTEM_BUS_ADDRESS is not set
GDBus-debug:Address: env var DBUS_STARTER_BUS_TYPE is not set
GDBus-debug:Address: Running `dbus-launch --autolaunch=05e508961149264c9b750a4c494aa6f7 --binary-syntax --close-stderr' to get bus address (possibly autolaunching)
GDBus-debug:Address: dbus-launch output:
0000: 75 6e 69 78 3a 61 62 73 74 72 61 63 74 3d 2f 74 unix:abstract=/t
0010: 6d 70 2f 64 62 75 73 2d 77 42 41 6f 4b 59 49 52 mp/dbus-wBAoKYIR
0020: 7a 75 2c 67 75 69 64 3d 30 34 30 64 31 33 66 33 zu,guid=040d13f3
0030: 30 61 30 62 35 32 63 32 30 66 36 32 63 34 31 63 0a0b52c20f62c41c
0040: 30 30 30 30 35 30 38 64 00 d2 38 00 00 01 00 40 0000508d..8....@
0050: 05 00 00 00 00 .....
GDBus-debug:Address: dbus-launch stderr output:
14549: Autolaunch enabled (using X11).
14549: --exit-with-session automatically enabled
14549: Connected to X11 display ':0.0'
14549: dbus-daemon is already running. Returning existing parameters.
14549: dbus-launch exiting
GDBus-debug:Address: Returning address `unix:abstract=/tmp/dbus-wBAoKYIRzu,guid=040d13f30a0b52c20f62c41c0000508d' for bus type `session'
Note that things work exactly like libdbus, e.g. from the
dbus-launch(1) man page:
Whenever an autolaunch occurs, the application that had to start a
new bus will be in its own little world; it can effectively end up
starting a whole new session if it tries to use a lot of bus
services. This can be suboptimal or even totally broken, depending
on the app and what it tries to do.
[...]
You can always avoid autolaunch by manually setting
DBUS_SESSION_BUS_ADDRESS. Autolaunch happens because the default
address if none is set is "autolaunch:", so if any other address is
set there will be no autolaunch. You can however include autolaunch
in an explicit session bus address as a fallback, for example
DBUS_SESSION_BUS_ADDRESS="something:,autolaunch:" - in that case if
the first address doesn't work, processes will autolaunch. (The bus
address variable contains a comma-separated list of addresses to
try.)
Signed-off-by: David Zeuthen <davidz@redhat.com>
The keyfile backend forms paths like this:
prefix + group_name + '/' + keyname
If the prefix is '/apps/yelp/' and the group name is '/' then this means
that we end up with a key name of (for example):
'/apps/yelp/' + '/' + '/' + 'font-adjustment'
= '/apps/yelp///font-adjustment'
which is obviously not a valid key name.
This patch rejects group names starting or ending with '/' or containing
'//' and also rejects keys containing '/'. This should make it
impossible for invalid keys to be formed.
Add a <flags> tag to the schema file format and a flags='' attribute to
go along with. Add some extra test cases for those.
Add new g_settings_{get,set}_flags() calls and support binding to
GParamSpecFlags properties. Add test cases.
This commit adds the following G_DBUS_DEBUG flags
- emission
- incoming
- call
- signal
- payload
https://bugzilla.gnome.org/show_bug.cgi?id=620913
Signed-off-by: David Zeuthen <davidz@redhat.com>
These fixes makes udisks-daemon from udisks' gdbus-port branch, see
http://cgit.freedesktop.org/udisks/log/?h=gdbus-port
handle 200 add/remove uevents generated by e.g.
#!/bin/bash
DEV=mmcblk0p1
for n in `seq 200` ; do
udevadm trigger --sysname-match=$DEV --action=remove
udevadm trigger --sysname-match=$DEV --action=add
echo foo $n
done
without any substantial leaks.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Things will still work fine if the GDBusInterfaceInfo is allocated
statically because if so the ref_count will be -1.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Without this guarantee, peer-to-peer connections are not very
useful. However, with this guarantee it's possible to export objects
in a handler for the GDBusServer::new-connection signal.
There are two caveats with this patch
- it won't work on message bus connections
- we don't queue up messages to be written
that can be addresses later if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=623142
Signed-off-by: David Zeuthen <davidz@redhat.com>
Add support for extends='' and list-of='' tags to the <schema> element.
The attributes are parsed and some sanity-checking is done but currently
nothing happens as a result.
Add some tests.
There's a couple of places in GDBus where it's a programming error
(e.g. we'll assert or spew via e.g. g_warning()) to use the API on a
closed connection. This approach can never work since a
GDBusConnection can be closed at any point in time outside of
programmer control.
Just change the code to return a run-time error (e.g. return
G_IO_ERROR_CLOSED when sending messages, invoking methods) or silently
accept the request (e.g. exporting objects, registering for signals)
without doing anything.
Note that a GDBusConnection object is always useless after being
closed - e.g. there's no way to "reopen" a connection - the user will
have to create a new object and use that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=623143
Signed-off-by: David Zeuthen <davidz@redhat.com>
Neutralise and deprecate the --uninstall option in the schema compiler
and remove it from gsettings.m4.
Make the new default behaviour a compromise between the old default
behaviour and the previous --uninstall option:
- never return a failure code if no schema files are found
- issue a warning instead
- remove the gschemas.compiled file if it exists
We only ever do the enum mapping for the property binding in the case
that a GParamSpecEnum exists and in that case the class is already
referenced by the GParamSpec. Use peek instead of ref/unref and add a
clarifying note.
Fix a bug where the type from g_variant_get_type() was used after
freeing the variant. This works for base types (since they are cached
and live forever) but not for arrays (where the bug was first seen).
Hold the GSettingsKeyInfo as part of the binding structure to save work
on each get/set. Use our copy of this structure to call the internal
get/set APIs. Give more descriptive error messages in the case of
invalid data on sets and retry using the translated default then schema
default value in case of failure to map on reads.
If we know the expected interface (e.g. :g-interface-info is set),
then we always warned when calling a method on a different
interface. Don't do that, there's no way the expected interface can
know anything about this method.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Either child_watch_source or timeout_source will already have been
destroyed after we finish the loop, and it's not safe to call
g_source_destroy() on it a second time unless we're still holding a
ref on it.
When disposing a GSocketConnection, don't explicitly close the
underlying GSocket. The GSocket will close itself if it gets
destroyed, and if it doesn't get destroyed, that presumably means the
app still wants to use it. Eg, this lets you use GSocketClient to
create a GSocketConnection, and then take the GSocket and destroy the
GSocketConnection.
https://bugzilla.gnome.org/show_bug.cgi?id=616855
The GSocket docs point out that g_socket_send/g_socket_receive may
return G_IO_ERROR_WOULD_BLOCK even if g_socket_condition_check claimed
that they wouldn't. Fix the socket streams to check for that.
https://bugzilla.gnome.org/show_bug.cgi?id=603309
Add lots of padding for public class structures. Notably, we seemed to
lack any padding whatsoever in the GDBusMessageClass struct (spotted
by Dan Winship). Also switch to using
gpointer padding[N];
instead of
void (*_g_reserved1) (void);
...
void (*_g_reservedN) (void);
Signed-off-by: David Zeuthen <davidz@redhat.com>
This patch breaks some rarely-used public API (only known user is
dconf).
This patch is based on work from Peng Huang <shawn.p.huang@gmail.com>.
See https://bugzilla.gnome.org/show_bug.cgi?id=621945
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is a minimal patch-out of the galias functionality. We will do a
release like this so that we can easily back it out if there are
reported problems.
A more substantial cleanup (mostly removing #includes from every file)
will follow if there are no issues.
Having this tool in GLib is a bad idea for a number of reasons:
- experience has shown that the simple file format was a bad idea
- the tool is currently implemented with a hack that would require a
dependency inversion to solve (the tool needs to depend on Python
GVariant bindings)
- the tool itself is unmaintained
It will be moved to the GConf git repository so people can continue to
use it for the purpose of converting GConf schemas.
When no path is provided for the schema, we have call
g_settings_new() instead of g_settings_new_with_path()
passing a NULL path.
This was crashing the tool on start since an assertion was
recently added to g_settings_new_with_path() to refuse NULL.
We can't search for a larger needle inside of a smaller haystack, and
unsigned integer subtraction tends to result in very large numbers
rather than small ones.
Add a check for this case and abort out immediately.
Also add a test case (lifted directly from the docs) that demonstrates
the problem.
Issue discovered and tracked down by Milan Bouchet-Valat
See https://bugzilla.gnome.org/show_bug.cgi?id=621838 for the whole
story. The problem was that we ended up reading data from arrays of
arrays when we were just supposed to be aligning the buffers.
Also add a host of debug infrastructure that was needed to find the
root cause. For now it can be turned on only via defining
DEBUG_SERIALIZER. In the future we might want to make it work via
G_DBUS_DEBUG. In a nutshell, the added debug info looks like this
Parsing blob (blob_len = 0x0084 bytes)
0000: 6c 01 00 01 3c 00 00 00 41 00 00 00 37 00 00 00 l...<...A...7...
0010: 08 01 67 00 08 61 61 79 61 7b 73 76 7d 00 00 00 ..g..aaya{sv}...
0020: 01 01 6f 00 08 00 00 00 2f 66 6f 6f 2f 62 61 72 ..o...../foo/bar
0030: 00 00 00 00 00 00 00 00 03 01 73 00 06 00 00 00 ..........s.....
0040: 4d 65 6d 62 65 72 00 00 00 00 00 00 34 00 00 00 Member......4...
0050: 03 00 00 00 63 77 64 00 01 73 00 00 23 00 00 00 ....cwd..s..#...
0060: 2f 68 6f 6d 65 2f 64 61 76 69 64 7a 2f 48 61 63 /home/davidz/Hac
0070: 6b 69 6e 67 2f 67 6c 69 62 2f 67 69 6f 2f 74 65 king/glib/gio/te
0080: 73 74 73 00 sts.
Parsing headers (blob_len = 0x0084 bytes)
Reading type a{yv} from offset 0x000c: array spans 0x0037 bytes
Reading type {yv} from offset 0x0010
Reading type y from offset 0x0010: 0x08 '
Reading type v from offset 0x0011
Reading type g from offset 0x0014: 'aaya{sv}'
Reading type {yv} from offset 0x001e
Reading type y from offset 0x0020: 0x01 ''
Reading type v from offset 0x0021
Reading type o from offset 0x0024: '/foo/bar'
Reading type {yv} from offset 0x0031
Reading type y from offset 0x0038: 0x03 ''
Reading type v from offset 0x0039
Reading type s from offset 0x003c: 'Member'
Parsing body (blob_len = 0x0084 bytes)
Reading type (aaya{sv}) from offset 0x0047
Reading type aay from offset 0x0048: array spans 0x0000 bytes
Reading type a{sv} from offset 0x004c: array spans 0x0034 bytes
Reading type {sv} from offset 0x0050
Reading type s from offset 0x0050: 'cwd'
Reading type v from offset 0x0058
Reading type s from offset 0x005b: '/home/davidz/Hacking/glib/gio/tests'
OK
Signed-off-by: David Zeuthen <davidz@redhat.com>
While we are already propagating the error to the user via the
GDBusConnection::disconnected signal (because the only safe thing is
to disconnect the other peer), changes are the user is simply not
listening to this signal.
This should never ever happen unless there's a bug in the
serializaer/deserializer so it's fine to complain via g_warning()
here.
Bug 621838, see
https://bugzilla.gnome.org/show_bug.cgi?id=621838
is related to this.
Signed-off-by: David Zeuthen <davidz@redhat.com>
The GType for a GVariant is now a fundamental GType instead of a boxed
one so use the right marshaller.
Signed-off-by: David Zeuthen <davidz@redhat.com>
When asynchronously acquiring the DBus connection, assume a reference to
the proxy object, to avoid destroying it in the middle of the operation.
See https://bugzilla.gnome.org/show_bug.cgi?id=621905
Like how we're handling activation, use GVariant for timestamps. To
avoid polluting the GtkApplication API with GVariants, we rename the
GApplication signals to "quit-with-data" and "action-with-data".
GtkApplication will then wrap those as just "quit" and "action".
https://bugzilla.gnome.org/show_bug.cgi?id=621002
Allow constructing a GDBusProxy for well-known names as discussed here
http://mail.gnome.org/archives/gtk-devel-list/2009-October/msg00075.html
including test cases.
Make it possible to create a GDBusProxy for a GBusType instead of a
GDBusConnection. This requires G_BUS_TYPE_NONE so add that too.
Nuke g_bus_watch_proxy() since one can now more or less use GDBusProxy
for this.
Port gdbus-example-watch-proxy to this new API and include this
example in the GDBusProxy doc page.
Also nuke the GType parameter from the GDBusProxy constructors as
requested here: https://bugzilla.gnome.org/show_bug.cgi?id=621229
Also update the porting guide and other API docs for this change.
Also fix a bug in the signal dispatching code so each subscriber only
get notified once, not N times, for the same signal. Also add a test
case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=621213
Signed-off-by: David Zeuthen <davidz@redhat.com>
The name buffer_availabile was kinda confusing, so its been renamed
to buffer_data_size() to match buffer_data().
Also I added a comment to buffer_ensure_space because its behaviour
wasn't obvious.
When the converter fills the whole buffer without reading all input,
we need to enlarge the buffer. Otherwise we get an assertion failure
for `outbuf_size > 0' in g_converter_convert.
https://bugzilla.gnome.org/show_bug.cgi?id=619945
gvdb just dropped the ability to have a separate "options" field. We
now store the options into a GVariant along with the default value.
For now, we use a small shim in GSettingsSchema in order not to touch
too much code. A more complete rewrite will follow.
This represents a change to the schema file format with another likely
to follow. glib-compile-schemas needs to be re-run after installing
this change.
accept more than one callback.
g_bus_own_name_with_closures
g_bus_own_name_on_connection_with_closures
g_bus_watch_name_with_closures
g_bus_watch_name_on_connection_with_closures
g_bus_watch_proxy_with_closures
g_bus_watch_proxy_on_connection_with_closures
https://bugzilla.gnome.org/show_bug.cgi?id=621092
Create a function run_with_application that both ensures the
app is running exactly while the test is running, which most
of the tests use. We start it beforehand, and kill it after.
This avoids having any interdependence between the tests (and
there definitely was before, because we didn't wait for
the process to actually terminate after a kill() call).
Also, open a pipe between the two, and have the child app
monitor that pipe. If it gets closed (e.g. because the parent
died), the child exits. This is the most reliable way to
avoid stale children; before, if we failed an assertion, the
parent would abort, and not run kill().
https://bugzilla.gnome.org/show_bug.cgi?id=621034
There was a slight race where we ended up calling into user code if
the user managed to unregister an object (or subtree) in the window
between
- processing the remote call on the worker thread; and
- continuing handling it on the user code thread (via an idle handler)
This patch fixes the problem.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Fix proxy construction for objects with no properties in the case
where G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES isn't set.
The unfortunate side-effect here is that GDBusProxy can no longer be
used to test for "object existence", e.g. creating a GDBusProxy for
any path and interface will not fail. But that's not really a big
deal, if apps rely on that they are doing something very wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=621119
Signed-off-by: David Zeuthen <davidz@redhat.com>
This adds a GApplication object to GIO, which is the core of
an application support class, supporting
- uniqueness
- exporting actions (simple scripting)
- standard actions (quit, activate)
The implementation for Linux uses D-Bus, takes a name on the
session bus, and exports a org.gtk.Application interface.
Implementations for Win32 and OS X are still missing.
The GSettings schema compiler was accepting any string as a path. It is
probably quite a common mistake to suspect that '/apps/foo' is a valid
path name when this will cause all sorts of trouble later. Check for
this case and report the error.
Since #include <gsettingsbackend.h> is a perfectly valid thing for
applications to do, and since we want to include gio headers from
gsettingsbackend.h, we need to effectively disable the #error we would
get from those headers (because we're not coming via gio.h).
We don't want to #include <gio/gio.h> here because this would cause
needless rebuilding of GSettingsBackend, GSettings,
GDelayedSettingsBackend, etc... every time someone changed anything in
any public header.
add GSimplePermission, a trivial const implementation of GPermission
can-request and can-release are always false for this implementation and
the value of 'allowed' is decided at construction.
Add GObject introspection annotations so that the length parameter is
correctly detected for g_variant_new_strv(), g_variant_get_strv() and
g_variant_dup_strv(). Also specify that it can be a NULL pointer in
g_variant_get_strv() and g_variant_dup_strv().
For g_settings_set_strv(), detect that a NULL value is allowed, meaning
empty array.
Closes bug #620384.
Signed-off-by: Ryan Lortie <desrt@desrt.ca>
Length of the array is redundant since it's NULL-terminated. This is not
consistent with many GLib and GTK+ functions, and adds complexity with
no real gain, while these convenience functions should be kept simple.
Closes bug #620312
This allows the caller to specify the reply type that they are expecting
for this call. If the reply comes back with the wrong type, GDBus will
generate an appropriate error internally.
- add a GVariantType * argument to g_dbus_connection_call() and
_call_sync().
- move the internal API for computing message types from introspection
data to be based on GVariantType instead of strings. Update users
of this code.
- have GDBusProxy pass this calculated GVariantType into
g_dbus_connection_call(). Remove the checks done in GDBusProxy.
- Update other users of the code (test cases, gdbus-tool, GSettings
tool, etc). In some cases, remove redundant checks; in some other
cases, we are fixing bugs because no checking was done where it
should have been.
Closes bug #619391.
Ryan pointed out on IRC that we didn't do anything here. Looking at
the code, it's painfully obvious that we should be returning an error
here since a comment already says that we've exhausted all possible
options.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- Fix various #include issues
- Change #error to #warning for the EXTERNAL authentication mechanism.
It is not clear if this should work on Win32 at all.
- Call close() before unlink() for the SHA1 keyring
- Change #error to #warning so we don't forget to do
permission checking of the .dbus-keyrings directory
- Use Win32 SID for the SHA1 auth mech
- Apparently we can't use word 'interface' as an identifier
- Implement a _g_dbus_win32_get_user_sid() function. For now it's
private. Don't know if it should be public somewhere. Maybe in
a future GCredentials support for Win32? I don't know.
- GFileDescriptorBased is not available on Win32. So avoid using
it in GLocalFile stuff. Now, Win32 still uses GLocalFile + friends
(which works with file descriptors) so expose a private function
to get the fd for an OutputStream so things still work.
- Fixup gio.symbols
- Fixup tests/gdbus-peer.c so it builds
With this, at least things compile and the gdbus-peer.exe test case
passes. Which is a great start. I've tested this by cross-compiling on
a x86_64 Fedora 13 host using mingw32 and running the code on a 32-bit
Windows 7 box.
https://bugzilla.gnome.org/show_bug.cgi?id=619142
Signed-off-by: David Zeuthen <davidz@redhat.com>
If --uninstall is given then don't give an error if the schema directory
is empty. Instead, erase the gschemas.compiled file, if it exists.
This is the right thing to do in the 'make uninstall' rule, where the
schema directory could very well be left empty as a result.
Modify gsettings.m4 to use this option.
The test was assuming that g_timeout_add() waited for at least the amount of
time given to it before running the function. This is not the case -- the
function can be run as much as 1ms early. Make the lower time bound asserted
in the test more permissive to account for this.
- hold a lock while accessing the tree of delayed values
- use weak reference counts with the owner object to avoid doing
g_object_notify on a dead object
- dispatch the "has-unapplied" notify to the proper main context
This commit fixes up a few race conditions in the GSettingsBackend, mostly with
respect to change notifications occuring at the same time as the last reference
count on a GSettings is dropped. With GDBus feeding us our incoming signals in
a separate thread, this is something that could easily happen.
There is currently no way (near as I can tell) to ensure that a message
has been sent when using GDBus. If we exit() before we are sure, then
it is very possible that the message isn't sent at all. This behaviour
was observed when using the GSettings commandline tool with dconf.
A quick and dirty workaround for now.
Don't define __USE_GNU, thats a glibc-internal macro, and
don't use SOL_SOCKET when not including sys/socket.h.
Maybe this file should be called glinuxcredentialsmessage.c...
Bug #618730
Rename the --schema-files option to --schema-file, since it only
accepts one file at a time. Change the GSETTINGS_CHECK_RULE to
use it that way, too. And also make it work better with !srcdir
builds.
Bugs #616731 and #616864
Without this fix, we segfault if the exported object returned an error
on all get_property() calls (in reality, this never happens).
Signed-off-by: David Zeuthen <davidz@redhat.com>
Fix an unintentional double free introduced in commit
4ad4c306c3.
This bug manifested itself when trying to complete this
$ gdbus introspect --system --dest <tab>
From valgrind running gdbus-peer test:
==20513== 32 bytes in 1 blocks are definitely lost in loss record 1 of 15
==20513== at 0x4024E4C: realloc (vg_replace_malloc.c:429)
==20513== by 0x4079BB1: g_realloc (gmem.c:174)
==20513== by 0x4099472: g_string_maybe_expand (gstring.c:396)
==20513== by 0x409A42A: g_string_insert_c (gstring.c:1050)
==20513== by 0x42169AC: g_string_append_c_inline (gstring.h:153)
==20513== by 0x421682C: _my_g_input_stream_read_line_safe (gdbusauth.c:336)
==20513== by 0x421843E: _g_dbus_auth_run_server (gdbusauth.c:1265)
==20513== by 0x4222B94: initable_init (gdbusconnection.c:1783)
==20513== by 0x41CF8D5: g_initable_init (ginitable.c:106)
==20513== by 0x41CFA8D: g_initable_new_valist (ginitable.c:219)
==20513== by 0x41CF920: g_initable_new (ginitable.c:139)
==20513== by 0x4223479: g_dbus_connection_new_sync (gdbusconnection.c:2046)
Bug #618650.
==6279== 21,615 (4,708 direct, 16,907 indirect) bytes in 169 blocks are
definitely lost in loss record 12 of 13
==6279== at 0x4024D2E: malloc (vg_replace_malloc.c:207)
==6279== by 0x4079A90: g_malloc (gmem.c:135)
==6279== by 0x4079DC8: g_malloc_n (gmem.c:252)
==6279== by 0x4097E66: g_strsplit (gstrfuncs.c:2434)
==6279== by 0x42169A2: g_dbus_address_get_stream_sync
(gdbusaddress.c:875)
Bug #618622.
Free the bus address after creating the singleton.
==26308== 39,736 (10,517 direct, 29,219 indirect) bytes in 388 blocks
are definitely lost in loss record 14 of 15
==26308== at 0x4024D2E: malloc (vg_replace_malloc.c:207)
==26308== by 0x4079A90: g_malloc (gmem.c:135)
==26308== by 0x4079DC8: g_malloc_n (gmem.c:252)
==26308== by 0x4095607: g_strdup (gstrfuncs.c:102)
==26308== by 0x4216B9A: g_dbus_address_get_for_bus_sync
(gdbusaddress.c:961)
==26308== by 0x422A7AE: get_uninitialized_connection
(gdbusconnection.c:5241)
Bug #618622.
There's no need to re-build the a{sv} array, just get it right out of
the parameters. Also avoid some string copies.
Signed-off-by: David Zeuthen <davidz@redhat.com>
This is to match g_dbus_connection_new(). This extension allows us to
extend GDBusAuthObserver to also be used in client-side authentication
in the future (right now it's only used on the server-side).
This is needed to e.g. allow encoding maybe types (once we add
G_DBUS_CAPABILITY_FLAGS_MAYBE_TYPES) if, and only if, that capability
has been negotiated with the peer (via authentication).
This uncovered a bug in name watching if the name wasn't activatable.
Also provoked the need for on_connection variants of g_bus_watch_name
(added g_bus_watch_proxy's variant as well).
Also make the gdbus-example-server include some example
annotations. The output looks like this:
$ gdbus introspect --session --dest org.gtk.GDBus.TestServer --object-path /org/gtk/GDBus/TestObject
node /org/gtk/GDBus/TestObject {
interface org.freedesktop.DBus.Properties {
methods:
Get(in s interface_name,
in s property_name,
out v value);
GetAll(in s interface_name,
out a{sv} properties);
Set(in s interface_name,
in s property_name,
in v value);
signals:
PropertiesChanged(s interface_name,
a{sv} changed_properties);
};
interface org.freedesktop.DBus.Introspectable {
methods:
Introspect(out s xml_data);
};
interface org.freedesktop.DBus.Peer {
methods:
Ping();
GetMachineId(out s machine_uuid);
};
@org.gtk.GDBus.Annotation("OnInterface")
@org.gtk.GDBus.Annotation("AlsoOnInterface")
interface org.gtk.GDBus.TestInterface {
methods:
@org.gtk.GDBus.Annotation("OnMethod")
HelloWorld(in s greeting,
out s response);
EmitSignal(@org.gtk.GDBus.Annotation.("OnArg")
in d speed_in_mph);
GimmeStdout();
signals:
@org.gtk.GDBus.Annotation("Onsignal")
VelocityChanged(d speed_in_mph,
@org.gtk.GDBus.Annotation.("OnArg_NonFirst")
s speed_as_string);
properties:
@org.gtk.GDBus.Annotation("OnProperty")
@org.gtk.GDBus.Annotation("OnAnnotation_YesThisIsCrazy")
readonly s FluxCapicitorName = 'DeLorean';
readwrite s Title = 'Back To C!';
readonly s ReadingAlwaysThrowsError;
readwrite s WritingAlwaysThrowsError = "There's no home like home";
writeonly s OnlyWritable;
readonly s Foo = 'Tick';
readonly s Bar = 'Tock';
};
};
This makes it possible to use the cached properties mechanism even if
constructing the proxy with the DO_NOT_LOAD_PROPERTIES flag.
This is useful for cases where you obtain the and track object
properties out-of-band. For example, in udisks, the plan is to have
something like this
Manager.GetObjects (out ao paths, out aa{sa{sv}} all_properties);
Manager.ObjectAdded (o path, a{sa{sv}} all_properties);
Manager.ObjectChanged (o path, a{sa{sv}} all_properties);
Manager.ObjectRemoved (o path, a{sa{sv}} all_properties);
E.g. the first GetObjects() call will return *all* data about *all*
exported objects. Further, this way a client will only need to listen
these three signals (three AddMatch) on the Manager object and it will
never need to do GetAll() etc (e.g. can use DO_NOT_LOAD_PROPERTIES).
(Of course this only works if the client is interested in all
objects... while this is true for udisks it is generally not true for
other D-Bus services).
Also use expected_interface to check for programming errors.
These are included wholesale in the docs, and the copyright
headers make them even more overwhelming. Plus, we don't have
copyright headers on examples anywhere else.
This fixes a problem with services that doesn't implement GetAll() for
one reason or another.
$ gdbus introspect --session --dest org.freedesktop.ReserveDevice1.Audio0 --object-path /org/freedesktop/ReserveDevice1/Audio0
node /org/freedesktop/ReserveDevice1/Audio0 {
interface org.freedesktop.ReserveDevice1 {
methods:
RequestRelease(in i priority,
out b result);
properties:
readonly i Priority = 0;
readonly s ApplicationName = 'PulseAudio Sound Server';
readonly s ApplicationDeviceName = 'Internal Audio Analog Stereo';
};
interface org.freedesktop.DBus.Properties {
methods:
Get(in s interface,
in s property,
out v value);
};
interface org.freedesktop.DBus.Introspectable {
methods:
Introspect(out s data);
};
};
Lots of people been suggesting this. We still use MethodInvocation /
method_invocation for handling incoming method calls so use call()
instead of invoke_method() helps to separate the client and server
facilities. Which is a good thing(tm).
gunixcredentialsmessage.h ought to live with other UNIX headers,
and the credentials are moved from dbus-specific to just GIO sources.
Also move gfiledescriptorbased.c to the UNIX sources.
Things compile and the test-suite passes. Still need to hook up
gio.symbols and docs. There are still a bunch of TODOs left in the
sources that needs to be addressed.
Signed-off-by: David Zeuthen <davidz@redhat.com>
- used in some places as a move-along-as-we-go pointer
- used in other places as a pointer to the fixed base of an array
Switch all users to the first style to avoid a crasher.
socket_strerror() was assuming all "strerror" messages are shorter
than 128 bytes, which is certainly true on Linux, but apparently not
on Windows.
https://bugzilla.gnome.org/show_bug.cgi?id=615494
The messages array was not reallocated correctly because it was using
malloc instead of realloc. Also, if the user requested messages but
none were received we would segfault. Rewrite the code to fix this
and, for better readability, use GPtrArray instead of rolling our own.
Also make the docs mention that the user need to free the returned
GSocketControlMessage objects using g_object_unref().
Clarify that *messages may be set to %NULL if there are no messages
(this will save pointless allocs of arrays).
Finally, the Win32 version didn't set messages to the expected value.
https://bugzilla.gnome.org/show_bug.cgi?id=616877
Signed-off-by: David Zeuthen <davidz@redhat.com>
There are apparently two incompatible ways of naming abstract sockets:
pad the sockaddr with 0s and use the entire thing as the name, or else
don't, and just pass a shorter length value to the relevant functions.
We previously only supported the former method. Add support for the
latter.
Also correctly handle "anonymous" unix sockaddrs (eg, the client side
of a connection, or a socketpair() socket), and add unix domain socket
support to the socket-client and socket-server test programs to make
sure this all works.
https://bugzilla.gnome.org/show_bug.cgi?id=615960
Visual Studio doesn't like slash as directory separator, so use
backslash. While at it, sort the list of files put in the project file
just for clarity.
Gschema-compile uses glob which is available on Unix only. Thus can't
run the gschema-compile test except on Unix either.
To avoid an Automake error, comment out the SOURCES and LDADD of
unix-streams which for some reason has been commented out from
TEST_PROGS.
Can't use a Makefile.am target called foo_PROGRAMS for random files
that aren't actually programs, as Automake assumes EXEEXT should be
appended to the file names.
Correspond to GUnixInputStream and GUnixOutputStream. No true async
support though. But that is how the Win32 API is, for files not
explicitly opened for so-called overlapped IO.
The API to create these streams takes Win32 HANDLEs. Not file
descriptors, because file descriptors are specific to the C library
used. The user code and GLib might be using different C libraries.
Also add a test program for the new classes, and a gio-windows-2.0.pc
file.
- if a key becomes mandatory, drop it from the changeset
- if we still get failing writes (ie: because of a race) then drop the
entire changeset and signal that it happened
Define GStatBuf as the type used by g_stat() and g_lstat(). Replaces
the non-public struct tag _g_stat_struct. Mostly relevant for Windows
where there are several variants of stat-style structs. On POSIX, is
just another name for struct stat.
Actually, also on many POSIX systems there are in fact several
variants of struct stat and corresponding stat() and lstat()
functions, but as g_stat and g_lstat are normally on POSIX just macros
that expand to stat and lstat, this should not cause a problem. It's
only when it's the actual g_stat() or g_lstat() implementation inside
GLib that gets called that one needs to be sure the passed struct is
the same as what GLib expects.)
We need to check priv->cancelled after taking the lock. Previously we
only checked it just before taking the lock, which left a small chance
for a race.
Don't keep the lists of source files for libglib, libgobject and
libgio in the VS project files in addition to the canonical location,
the corresponding Makefile.am files.
Instead, generate the corresponding .vcproj files at make dist time
using the C preprocessor, from template files called .vcprojin. We
still list explicitly in the .vcprojin files some of the
Windows-specific source files, and the sources files of gnulib and
pcre.
There might be a GSource attached to a GMainContext, about to be removed by a
pending cancellation. Deleting the handle too early will trigger a g_warning in
the "select()" call in GMainContext. Attached patch fixes this by deferring
destruction of WSAEVENT object until GSocket's finalize().
Patch from bug #612702.
Signed-off-by: Tor Lillqvist <tml@iki.fi>
It turns out that the way this worked did not work out for the current
main usecase (gedit) due to issues with how this is best integrated
with GtkTextView. So, in order to not have to support an unused non-ideal
API forever we remove this before its been in a stable release.
The basic feature seems to have some utility though, so we hope for it
to eventually return in a better form.
Some buildd environments have an unwritable $HOME, which makes the
test that looks for an unexisting file there fail. Use $TMP instead,
which should be more reliable.
https://bugzilla.gnome.org/show_bug.cgi?id=610860
root can access and write to a directory when it doesn't have
exec and write permissions respectively. So expect the tests that
check that to succeed rather than to fail when running as root.
https://bugzilla.gnome.org/show_bug.cgi?id=552912
This adds support for G_FILE_MONITOR_SEND_MOVED events when requested by
the user to the inotify backend. Last part to fix bug #547890.
Based heavily on a patch by Martyn Russel <martyn@lanedo.com>.
Add a G_FILE_MONITOR_SEND_MOVED flag indicating the API user
wants to receive the new G_FILE_MOINOTR_EVENT_MOVED event
instead of single CREATED/DELETED events.
First part of bug #547890.
The (linux specific) system call splice can be
used to transfer data between file descriptors
whitout copying them into user space.
See bug #604086 for additional details.
Fixes: Bug 604967 - 2.22.3 libasyncns build fails on HP-UX 11.11
* gio/libasyncns/asyncns.c: properly guard the includes of sys/select.h
and sys/time.h
If threads are available we always enable threads in gobject, which
means all gio/gobject code can enable the unconditional thread calls.
This is a minor optimization since we avoid a bunch of unnecessary
is-threads-enabled checks.
https://bugzilla.gnome.org/show_bug.cgi?id=606775
Adds an optional query method to giomodules which should return all
possible extension points the module may implement.
Then we add a new call g_io_modules_scan_all_in_directory() similar to
g_io_modules_load_all_in_directory() that doesn't return all loaded
modules, thus allowing lazy loading.
In g_io_modules_scan_all_in_directory we look for an optional
giomodule.cache file and use the information in that to avoid
loading modules until they are needed for an extension point.
In the deserialise function, GUnixFDMessage was comparing 'level' to
both SOL_SOCKET and SCM_RIGHTS. It is correct to compare 'type' to
SCM_RIGHTS. The code passed tests only because:
1) it's a "should always be OK" double-check
2) SOL_SOCKET and SCM_RIGHTS, by chance, both have the value '1' on
Linux systems.
Not only is the default implementation broken (it causes infinite recursion
as seen in bug #603982), but its also worthless. If we just fall back on the
default stream operations we automatically get async version based on
the sync filter stream operations, which is what we want.
Note: Since we export types with Iface in the name rather than
Interface we have to use some typedefs to make this work. New
interfaces should probably use Interface as the public name.
The "default location" of the given mount is a path that reflects
the main entry point for the user (e.g. the home directory, or the
root of the volume).
https://bugzilla.gnome.org/show_bug.cgi?id=561998
• "asynchronous" was misspelled as "asyncronous" in various places;
• punctuation was missing;
• g_async_initable_new_async() had a stray "and";
• references to g_async_initable_new_finish() were missing a "the".
https://bugzilla.gnome.org/show_bug.cgi?id=602417
This is an interface for stateful conversions of data. Its a generic
interface suitable for things like IConv, compression, decompression,
and regexp replacement.
Introduced a more precise error message for EPERM when symlinking to
a local filesystem.
EPERM on symlink means symlinking is not supported by the underlying
fs so it is not the general meaning of EPERM which roughly translates
to 'Operation not permitted'.
Since returning exactly one match has special significance, don't
give up matching before we've found at least 2 types. Also, make
sure that we don't return the same mime type more than once.
Bug 541236.
GWin32DirectoryMonitor was quite broken, but nobody had apparently
noticed, or at least not filed any bug. Only now with a bleeding edge
GTK+ file chooser does the code get exercised in common programs like
gtk-demo or GIMP, apparently. Bug #598899.
The source can be destroyed by the time we complete the result, and
then the g_source_get_context(current_source) call will cause
a critical error. We check for the source being destroyed and avoid
the check in that case.
This means we miss the right-thread check in this case, but thats
merely a helper, so this is not critical.
Metadata are really part of the pathname, not the target file
(as they are stored by pathname, and for many metadata like icon position
etc make not sense using the target data). So, even if nofollow
is not specified we should not follow links for metadata.
Ideally this should be implemented in the metadata extension in gvfs,
but the extension API does not allow this, so we do it in gio.
See https://bugzilla.gnome.org/show_bug.cgi?id=593809
g_network_address_address_enumerator_next_finish takes the first item of the
address list and moves the pointer to the next one, so we shouldn't do the same
in g_network_address_address_enumerator_next_async function
Fixes bug #593941
g_socket_send_message() and g_socket_send_to() fail with ENOBUFS or
EFAULT due to the fact that if no "address" argument is specified to
g_socket_send_message, when g_socket_send_message() calls sendmsg(2),
the 2nd parameter to sendmsg ("const struct msghdr *msg") contains
uninitialized values. The fix is simple - initialize msg.msg_name to
NULL and msg.msg_msg_namelen to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=594759
This warning hits code that uses GSimpleAsyncResult outside of a
mainloop as a helper object. For instance EggDBus does this.
Since the bugs this warning would fix are pretty easy to spot
and since EggDBus is deployed already we just remove the
"called from outside main loop" warning.
However, we need to keep the "called from wrong context" warning
as that is very helpful when debugging misuse of the new multiple
main context code.
Previous code used g_mkstemp(). But when using
G_FILE_CREATE_REPLACE_DESTINATION, no attempt was made to ensure proper
mode and flags of the created temporary file. The visible issue was that
the file was always created with mode 0600 as opposed to using 0666.
(The invisible issue was that O_RDWR was used instead of O_WRONLY.)
