PEP8 says that:
"Comparisons to singletons like None should always be done with is or
is not, never the equality operators."
glib uses a mix of "== None" and "is None". This patch changes all
cases to the latter.
Use g_test_skip() so that the TAP output is correct for the tests,
rather than printing using g_printerr().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/640
Use either g_get_real_time() or g_date_time_new_now_local(). This means
we don’t need to worry about time_t being 32b in future (the year 2038
problem), and it makes the need for error handling a bit more explicit.
Improve the error handling in several cases.
Based on a patch by Niels De Graef
(https://gitlab.gnome.org/GNOME/glib/merge_requests/142).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1402
Apparently this is needed for building PE libraries. It makes no
difference on Linux, where linking of the GLib symbols in the inotify
file monitor code is done lazily.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1201
The tests array was being wiped out by an assignment instead of an
append. This adds another 19 tests to what’s typically being run
already.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was missed in !137 because some of the GIO tests weren’t being run
under Meson (see following commits).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Adds tests to cover this case and similar cases for various GResource
methods in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/927
When changing the locale using setlocale(), duplicate the old locale
value before updating it, so that we can safely restore the old locale
after running the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The flush data structures were not zero-initialised, which meant the
branch in flush_buffer_thread() was based on an uninitialised condition.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
For the purposes of debugging, it is quite useful for every GSource to
have a name set. Ensure that any GSource we construct inside GLib has a
name set. For GSources which are then returned to the caller, this name
can then be overridden with something even more useful by the caller.
Since this data is only used for debugging, avoid doing any allocations
for it; just use static strings.
https://gitlab.gnome.org/GNOME/glib/issues/1175
This reverts commit 03c324c64a and fixes
the original problem with e004d5f397 that
caused the revert.
We use $(builddir) instead of $(abs_builddir) so that Automake's
dependency generation works correctly.
See !127.
Add an app-launching function which allows standard file descriptors
to be passed to the child process.
This will be used by gnome-shell to pass systemd journal descriptors
as stdout/stderr. gnome-shell's child_setup function can then be
eliminated, which will enable use of the posix_spawn optimized
gspawn codepath for desktop app launching.
In order to use the new posix_spawn gspawn codepath, for more robust
app launching when available memory is low, we need to meet some
conditions.
child_setup needs to be NULL for this optimization to work, so drop
the internal child_setup that is used here. Replace it with a lightweight
wrapper binary (gio-launch-desktop) that sets GIO_LAUNCHED_DESKTOP_FILE_PID
before executing the app.
Adjust PATH for gio tests so that it can execute the new binary from the
build directory.
They’re network file systems, but not system file systems (in the sense
that procfs is a system file system). This fixes them disappearing from
the sidebar in the UI.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1424
Add a new syntax to override files: if the group name has a ':' in it,
it indicates that we want to override the default values of keys for
only one desktop. For example:
[org.gnome.desktop.interface:Unity]
font-name='Ubuntu 12'
Will override the settings, only if "Unity" is found in
XDG_CURRENT_DESKTOP. Multiple per-desktop overrides can be specified
for a given key: the one which comes first in XDG_CURRENT_DESKTOP will
be used.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
Recognise a new 'd' option in schema keys which gives a dictionary of
per-desktop default values. This dictionary is searched for the items
found in XDG_CURRENT_DESKTOP, in the order. If nothing matches (or if
the option is missing) then the default value is used as before.
This feature was requested by Alberts Muktupāvels and this patch is
based on an approach devised by them.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
There are a couple of different ways (and soon one more) to access the
default value of a key. Clean up the various places that access this to
avoid duplication.
https://bugzilla.gnome.org/show_bug.cgi?id=746592
There were previously no tests for it. These take gmountoperation.c up
to 85.5% coverage of lines.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1423
check_expected_events is heavily modified in this commit to tolerate
event loss and allow renaming to be reported as creation and deletion.
This fixes test failure on FreeBSD.
Previously, kqueue file monitor only add event sources for directories
regardless of the type of the file being monitored. Doing so may be
possible on inotify, but it is not sufficient on kqueue. Watching a
directory on kqueue doesn't report changes made to files under it, and
we must watch files themselves to get notified. This problem is fixed
by adding a second watch for non-directory file monitors, and the result
is that we are now able to receive 'CHANGED' and 'ATTRIBUTE_CHANGED'
events for non-directory files.
Since having two watches on one file monitor requires many code changes
to work properly, this commit also changes the following things:
- NOTE_ALL macro is now replaced by note_all inline function. Since the
kqueue backend is shared by all BSD operating systems, there are a
few difference between these systems. It is easier to do '#ifdef'
check in a function than in a macro.
- Both g_kqueue_file_monitor_callback and g_kqueue_file_monitor_cancel
now holds a lock before accessing kqueue_sub structs. This fixes a
crash when these two functions are called from different threads,
causing g_kqueue_file_monitor_callback to access freed memory.
- 'mask' variable in g_kqueue_file_monitor_callback is now removed.
The usage of 'mask' was wrong because of the 'mask > 0' check.
'CHANGED' event has value 0 so the 'mask > 0' check made it
impossible to emit 'CHANGED' events.
- kqueue-missing scans can now be triggered from the kqueue event
callback instead of always waiting for 4 seconds.
- Don't remove a file from kqueue on unlink unless its hard link count
has dropped to zero.
- Don't use 'else if' in the check of 'fflags'. It is possible for a
kevent to have multiple flags set.
- Don't use g_file_monitor_emit_event directly. Always use
g_file_monitor_source_handle_event to report events.
Events submitted to g_file_monitor_emit_event are delivered
immediately, but events sent to g_file_monitor_source_handle_event
are scheduled by GLocalFileMonitor. If we mix the two, the order of
events will be wrong and tests will fail.
- Report 'CHANGES_DONE_HINT' immediately after 'CREATED' if the file
created is not a regular file. This is copied from ih_event_callback.
GVfs utils used to have bash completion, which was pretty useful. However,
it hasn't been ported to gio tool unfortunately. GLib provides completion
for various utils already, so it would be nice to provide completion also
for gio tool. I've updated old bash completion code and merged with some
my old unmerged fixes.
The gvfs completion used "gvfs-ls --show-completions" helper. This mentioned
option hasn't been obviously ported to "gio list" and the proposed completion
doesn't add this option in "gio list" to not pollute the codes, but maybe it
is a bit slower as consequence.
The proposed bash completion suggests subcommands, uris and paths including
the remote mounts. It contains some workarounds, especially because of proper
handling of paths with colons and other special chars (like spaces)...
Since it’s deprecated in favour of positional arguments, including it in
the help output is confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
These generate basic .c and .h files containing the GDBusInterfaceInfo
for a D-Bus introspection XML file, but no other code (no skeletons,
proxies, GObjects, etc.).
This is useful for projects who want to describe their D-Bus interfaces
using introspection XML, but who wish to implement the interfaces
manually (for various reasons, typically because the skeletons generated
by gdbus-codegen are too simplistic and limiting). Previously, these
projects would have had to write the GDBusInterfaceInfo manually, which
is painstaking and error-prone.
The new --interface-info-[body|header] options are very similar to
--[body|header], but mutually exclusive with them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
Recursive annotations do seem to be supported, so we should support them
properly in the type system representation. This currently introduces no
behavioural changes, but will be used in upcoming commits.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795304
This is to avoid race between dispose() being called on the
GFdoNotificationBackend instance, and any pending operations which are
still waiting on a D-Bus reply when it’s disposed.
(thx to Philip Withnall for pointing that out)
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
The basic test for duplicate icon names was not working fine when taking
into account fallbacks and icon style mix. This fixes it.
Also resolve the few review comments, i.e.: comment explaining
g_themed_icon_update_names() and the priority order applied to icons;
and using guint for 'i'.
Previously, calling:
g_dbus_is_supported_address ("some-imaginary-transport:", NULL)
correctly returned FALSE; but calling:
g_dbus_is_supported_address ("some-imaginary-transport:", &error)
crashed with:
GLib-GIO:ERROR:../gio/gdbusaddress.c:434:g_dbus_is_supported_address:
assertion failed: (ret || (!ret && (error == NULL || *error != NULL)))
This was because, if the address component did not start with a known
transport, no error was set. Fix this, reusing an error string used by
the corresponding else branch in g_dbus_address_connect(), and adjust
the test to pass both NULL and non-NULL GError **s to this function in
every test case. This case:
g_assert (!g_dbus_is_supported_address ("some-imaginary-transport:foo=bar;unix:path=/this/is/valid", NULL));
would have caught this bug with a non-NULL GError **.
The way things were before: a FreedesktopNotification struct is
allocated before the dbus call, and this same struct is possibly re-used
for other dbus calls. If the server becomes unavailable, the callback
will be invoked after the call times out, which leaves a long time where
other dbus calls can happen, re-using the same FreedesktopNotification
as user data. When the first call times out, the callback is invoked,
and the user data is freed. Subsequent calls that used the same user
data will time out later on, and try to free a pointer that was already
freed, hence segfaults.
This bug can be reproduced in Cinnamon 3.6.7, as mentioned in:
<https://github.com/linuxmint/Cinnamon/issues/7491>
This commit fixes that by always allocating a new
FreedesktopNotification before invoking dbus_call(), ensuring that the
callback always have a valid user data.
Signed-off-by: Arnaud Rebillout <elboulangero@gmail.com>
Use a GOnce to make sure we only warn about notifications not being
supported on Windows once, rather than on each attempted notification.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: https://gitlab.gnome.org/GNOME/glib/issues/1234
On an Android build, API 22, at least, I got a:
> warning: "UNIX_PATH_MAX" redefined
We were currently defining it as:
> #define UNIX_PATH_MAX sizeof (((struct sockaddr_un *) 0)->sun_path)
Whereas Android's headers define this variable of sockaddr_un as:
> char sun_path[UNIX_PATH_MAX];
So by definition, we will still get the right result in the end by just
using the original value of UNIX_PATH_MAX.
C_IN macro was added years ago in bcbaf1bef0, using same value as the
internal code of Android with the reasonning that "some parts of the API
used by the resolver objects is not public in the Android NDK (yet)".
Well since then things are changed, since it is definitely available (at
least on the API 22 of Android which I am using) in the public header
arpa/nameser_compat.h.
Let's just add a #ifndef to handle both cases when you build with an
older or recent API.
Meson has the ability to classify tests according to "suites", a list of
tags. This is especially useful when we want to run specific sets of
tests — e.g. only GLib's tests — instead of the whole test suite. It
also allows us to classify special tests, like "slow" ones, so that we
can only run them when needed.
FIONREAD ioctl on Linux reports the size of payload on UDP sockets.
However, other systems usually add internal header size to the reported
size, which vary between different operating systems and socket types.
To make it work on more systems, we should follow what we do on Windows
instead of using this unreliable FIONREAD ioctl.
This fixes socket test on FreeBSD.
libelf, just like libc, is not a single project. It is an interface
which can be implemented independently by different operating systems.
Therefore, we cannot expect all systems to provide a .pc file, and we
should fallback to cc.find_library and cc.has_function like what we
already do in autotools build.
Non-glibc gettext implementation seems to decide the language from
LC_MESSAGES environment variable instead of LC_MESSAGES locale, so
we should set both environment variable and locale when running tests
which need translation from specific languages.
G_IO_ERROR_NOT_SUPPORTED is used as parameter for g_set_io_error(),
however, errno is expected instead and thus error code is set to 0,
which is wrong. Let's use ENOTSUP instead.
To be honest, I am not sure why, but in some special environments (e.g.
our CI integration) can happen, that file device number is different from
parent device number. Return "Unable to find or create trash directory for
%s" error from g_local_file_trash() in that case and also set
G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH appropriately.
Make the --help output more consistent with the man page, making it more
obvious that --sourcedir only applies to the files referenced in FILE,
not to the location of FILE itself.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1406
Change G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH logic to be consistent
with recent g_local_file_trash changes, i.e. set this to FALSE for
locations on system-internal mounts.
https://gitlab.gnome.org/GNOME/glib/issues/251
New bugs appears periodically in nautilus/gvfs/glib components that not
all trashed files are shown in trash:///. It used to be problem mostly
for "bind mounts" and btrfs subvolumes only. Currently, it is also
problem for nfs, cifs and other filesystems, which have been recently
added by commmit 0d69462f on the list of system internal filesystems.
This happens because the trash backend doesn't monitor files on system
internal mounts. Such behavior is not against the trash-spec, however,
we should be consistent within GNOME.
This behavior has the nice side-effect that it solves issues with hangs
on network filesystems: https://gitlab.gnome.org/GNOME/glib/issues/605,
because those are currently on the system internal filesystem list.
https://gitlab.gnome.org/GNOME/glib/issues/251
Main changes were:
- take into account that style variants are added to the list of icon
names.
- In the test of icons set with 3 names ("first", "testicon" and
"last"), I also changed "first" to "first-symbolic" so that we can
test in such a case that the variant is the regular icon (only for
this name, out of the 3).
- Finally icon hashes are necessarily changed, and since emblems are
sorted by their hash in emblem icons, I had to invert an order which
was now different in one of the tests.
... a theme icon.
Otherwise fallbacks of the added icon name are not added to the list (if
use-default-fallbacks is set), nor is the regular/symbolic variant. Also
if we do not recreate the finale list from scratch, sorting of icons and
their variants may end up wrong.
To this end, let's keep around the icon names used for initialization,
separate from the finale name list.
When a themed icon is constructed with several input icon names, add the
variants (symbolic as well as level fallbacks) for every icon names, not
only the first one.
The search order is: first icon name, then its level fallbacks, then
second icon name, then its level fallbacks, then all style variants
(symbolic or regular, opposite to requested style) keeping the same
order again.
This fixes the contenttype GIO unit test.
Whatever the preferred icon style is (symbolic, regular or the requested
style), fallbacking to the other style in case of absent variant is
better than not finding any icon at all.
Also style fallbacking should be managed separately from property
"use-default-fallbacks". Default fallbacks are meant for the process of
getting up in context levels (as separated by dashes in icon name). Even
though it also uses dash characters in format, this is a different
concept as the variant of styles.
Without this commit for instance, if an icon only had a symbolic
variant, and the theme had "-gtk-icon-style" set to "regular" while your
GTK+ application requested the regular icon name, you were getting no
icons, and the application would look completely broken.
Now one would at least fallback to the symbolic icon as last resort
(which is infinitely better than having no icons).
Autoconf macro AC_HEADER_MAJOR doesn't define a macro in config.h when
major is defined in sys/types.h. This was not a problem because major
is assumed to be always available. However, commit aefffa3fbc
changes this assumption in order to fix build on systems without major,
which causes code using major to be disabled on systems putting major
in sys/types.h.
This commit defines a new macro MAJOR_IN_TYPES for both autotools and
meson builds to make major useful on these systems again.
gio-querymodules-wrapper.py is copied from glib-networking. This python
wrapper script is needed because meson.build cannot check for DESTDIR
env variable itself, unlike Makefile.am. It is used to update
giomodule.cache file when installing GIO modules like fam.
The previously implementation considered a file to be a mountpoint if
its parent is on a different device. / is its own parent, so by this
definition it is not a mountpoint.
But / is (generally) listed in fstab, and fstab(5) defines the
directories it contains to be mountpoints. This attribute should follow
that definition (and reasonable expectation): the root directory is a
mountpoint.
So, add a special-case for the case where the file's parent has the same
st_dev and st_ino as the file, which is true only at the root.
Test this attribute at / (only on POSIX), /proc (but only on Linux), and
at many files and directories created by the test suite (which cannot be
mountpoints).
Sometimes file monitor events may be slow to emit. Using g_idle_add
makes it less possible for events to be scheduled later than the main
loop quit, preventing test failure caused by missing events.
This fixes test failure on FreeBSD.
The check in _ke_is_excluded, which causes GKqueueFileMonitor to
fallback to GPollFileMonitor when it returns TRUE, was made to prevent
file monitor from blocking unmount of removable drives on systems not
supporting O_EVTONLY flag in open. However, since g_mount_can_unmount
always returns TRUE on Unix-like platforms, the check always returns
TRUE on non-standard mount points, which is very likely to cause all
programs on the desktop to use the polling fallback if GNOME is
installed in a different prefix for development. This makes the desktop
sluggish and results in bad developer experience on *BSD.
Kqueue isn't good at detecting rapid file creation and deletion. It
tends to miss events because events returned by the kernel don't include
filename information. Since the size of struct kevent is fixed, it is
probably not possible to extend the API to include file names without
breaking ABI. Therefore, we disables the test here to avoid test failure
that is impossible to fix in a reliable way.
The test 'file' uses non-standard '--bytes' option when running du,
which may cause error on non-GNU systems. To keep the test working,
we skips the du check as if we don't find a du command when du fails.
-export-dynamic is a libtool flag. It is also supported by GCC as an
undocumented flag, but it is not supported by Clang. Since we don't use
libtool in meson, we should use -Wl,--export-dynamic instead.
In master, it is already possible to build GLib using Visual Studio
using Meson[1] for some time, so we should focus on maintaining only the
Meson build files for building GLib with Visual Studio.
[1]: There are caveats when building with Visual Studio 2008, namely
that one needs to use the mt command to embed the manifests that
are generated with the .exe/DLLs, for all builds, and that in the
case where the compilation hangs on Visual Studio 2008 x64, as a
workaround, should stop the build by terminating all cl.exe tasks
and change the compiler optimization flag from /O2 (full speed) to
/O1 (optimize for size), due to compiler optimization issues.
Change G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH logic to be consistent
with recent g_local_file_trash changes, i.e. set this to FALSE for
locations on system-internal mounts.
https://gitlab.gnome.org/GNOME/glib/issues/251
New bugs appears periodically in nautilus/gvfs/glib components that not
all trashed files are shown in trash:///. It used to be problem mostly
for "bind mounts" and btrfs subvolumes only. Currently, it is also
problem for nfs, cifs and other filesystems, which have been recently
added by commmit 0d69462f on the list of system internal filesystems.
This happens because the trash backend doesn't monitor files on system
internal mounts. Such behavior is not against the trash-spec, however,
we should be consistent within GNOME.
This behavior has the nice side-effect that it solves issues with hangs
on network filesystems: https://gitlab.gnome.org/GNOME/glib/issues/605,
because those are currently on the system internal filesystem list.
https://gitlab.gnome.org/GNOME/glib/issues/251
This test assumes the subprocess does not print anything else on stdout
other than the dbus address, otherwise g_test_trap_assert_stdout()
fails to match. But if the env running tests has G_MESSAGES_DEBUG=all
then it will also print "PATH=%s".
It's a synonym of G_VOLUME_IDENTIFIER_KIND_UNIX_DEVICE.
It doesn't change anything except not feeling dirty from using a wrongly
prefixed constant for the object type.
See: #182
Help is usually printed from tools if no arguments are given and there
is not default action. However "gio mount" and "gio trash" just silently
return. Let's print "No locations given" error and show help consistently.
"gio help COMMAND" shows some arguments with "..." and some with "…",
which looks weird, e.g.:
$ gio help mount
gio mount [OPTION…] [LOCATION...]
Let's use "…" consitently.
- Compiler checks were failing because it were using C compiler to build
objc code.
- xdgmime is needed on osx too.
- -DGIO_COMPILATION must be passed to objc compiler too.
- gapplication doesn't build on osx, it is excluded in autotools too.
We have to be careful when we use add_project_link_arguments(): All
targets are built using link arguments for the C language, except for
libgio on osx which use the objc language, because it contains some ".m"
source files. See https://github.com/mesonbuild/meson/issues/3585.
https://bugzilla.gnome.org/show_bug.cgi?id=796214
Those files got renamed to .c to work around an automake issue, but
Meson needs them to have .m extension. Better rename them at build time
in Makefile.am since that's where the workaround is needed.
https://bugzilla.gnome.org/show_bug.cgi?id=672777
Fixes this build error on macOS when inside an ssh terminal:
Traceback (most recent call last):
File "[...]/gio/tests/gengiotypefuncs.py", line 23, in <module>
for line in f:
File "[...]/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2625: ordinal not in range(128)
https://bugzilla.gnome.org/show_bug.cgi?id=796328
GVfsUDisks2VolumeMonitor handles x-gvfs-hide/x-gvfs-show mount options
used to overwrite our heuristics whether the mount should be shown, or
hidden. Unfortunately, it works currently only for mounts with
corresponding fstab entries, because the options are read over
g_unix_mount_point_get_options. Let's introduce g_unix_mount_get_options
to allow reading of the options for all sort of mounts (e.g. created
over pam_mount, or manually mounted).
(Minor fixes to the documentation by Philip Withnall
<withnall@endlessm.com>.)
https://bugzilla.gnome.org/show_bug.cgi?id=668132
On non-glibc platforms gettext is provided by extra libintl dependency.
We wrongly thought libintl is an internal dependency and applications
needs to explicitly link on it, but turns out that breaks many
applications and with autotools the .pc generated actually has -lintl in
public "Libs:".
https://bugzilla.gnome.org/show_bug.cgi?id=796085
-z nodelete breaks the libresourceplugin module usage in the resources.c
test, which expects to be able to unload it.
Make the Meson build match what the autotools build does: only pass
glib_link_flags to the headline libraries (glib-2.0, gio-2.0,
gobject-2.0, gthread-2.0, gmodule-2.0) and omit it from all other build
targets.
https://bugzilla.gnome.org/show_bug.cgi?id=788771
gioenumtypes needs to be generated:
In file included from ../../../../external/glib/gio/kqueue/gkqueuefilemonitor.c:37:
In file included from ../../../../external/./glib/gio/glocalfilemonitor.h:25:
In file included from ../../../../external/./glib/gio/gunixmounts.h:24:
../../../../external/./glib/gio/gio.h:86:10: fatal error: 'gio/gioenumtypes.h' file not found
#include <gio/gioenumtypes.h>
^~~~~~~~~~~~~~~~~~~~
https://bugzilla.gnome.org/show_bug.cgi?id=794325
It inserted the new items one position after the given one and inserted all new items
at the same position resulting in the items being in the reverse order of the
input array.
It was decided to make these behavioural changes because this function has according to
https://codesearch.debian.net/search?q=g_list_store_splice only one real user (nautilus)
and it didn't do what one would expect from reading the documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=795307
All those logging functions already add a newline to any message they
print, so there’s no need to add a trailing newline in the message
passed to them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The monitor_path comes from g_file_get_path(), so should be freed with
g_free() rather than free(). This makes no difference because they are
the same function in practice, but using free() is a bit confusing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This continues one of the const-correctness fixes from the previous
commit (it needed some more transitive fixes), and reverts another of
them, since it was over-zealous.
This fixes CI failure: https://gitlab.gnome.org/GNOME/glib/-/jobs/27125.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Spotted when temporarily compiling with -Wwrite-strings. This only goes
a small way towards making the code base -Wwrite-strings–clean. It
introduces no functional changes, and fixes no bugs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
This fix undefined symbol link error when building for non-glibc
platform. Applications must link on libintl, it is not a public
dependency of libglib.
On glibc platforms libintl is a not found dependency and is just ignored
by meson, so it doesn't hurt to always have it.
https://bugzilla.gnome.org/show_bug.cgi?id=795406
Fix various warnings regarding unused variables, duplicated
branches etc by adjusting the ifdeffery and some missing casts.
gnulib triggers -Wduplicated-branches in one of the copied files,
disable as that just makes updating the code harder.
The warning indicating missing features are made none fatal through
pragmas. They still show but don't abort the build.
https://bugzilla.gnome.org/show_bug.cgi?id=793729
Make it a bit more obvious that the changed properties are provided as
an a{sv}.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
g_desktop_app_info_load_from_keyfile() refuses to load .desktop files
where the executable doesn't exist. Therefore whether or not the .desktop
file added in commit 148995544 is actually considered during tests depends
on /usr/bin/flatpak being installed. This isn't a safe assumption to make,
so use /bin/sh to test filtering of "prefix" commands.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
The executable name can be a useful bit of information to match on in
searches where it differs from the name (for example because the latter
is localised), but will produce surprising results where the real appli-
cation is executed by a shared binary (for example interpretors like
gjs or python, or sandboxes like flatpak).
Address this by adding a blacklist of binary names that are ignored
in search.
https://bugzilla.gnome.org/show_bug.cgi?id=795488
Removing the event and closing the related file descriptor must be
done first to make sure the kqueue subsystem delete pending events.
The timeout must be disarmed before freeing the directory dependency
list otherwise it might populate it again.
https://bugzilla.gnome.org/show_bug.cgi?id=795193
This makes it a bit easier for debugging which files were generated from
which introspection XML.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=650875
Add a test for monitoring an existing local file, with the
WATCH_HARD_LINKS flag specified. This would previously cause a crash;
now it doesn’t.
This test contains a FIXME where I suspect we should be getting some
additional file change notifications from changes made through the hard
link; this requires further follow up and probably further fixes to our
inotify backend.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This gets the G_FILE_MONITOR_WATCH_HARD_LINKS flag to the state where it
doesn’t cause crashes, and essentially acts as a no-op. It will not yet
actually monitor for changes made via hard links.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755721
The call to _start() fills in the dirname, basename, and filename
arguments according to the following rules:
dir watches: dirname filled
file watches: dirname and basename filled
hardlink: filename filled
This doesn't map to how the current inotify backend works very nicely,
so we need to adjust things a bit when creating our "sub" objects.
https://bugzilla.gnome.org/show_bug.cgi?id=755721
This test will only work on machines which have IPv6 enabled and have a
local IPv6 interface with ID 1. On machines which don’t (such as AWS
servers, which we run CI tests on), the GResolver tests will fail with
G_RESOLVER_ERROR_INVALID. We can’t differentiate this kind of failure
(where we’d want to skip the test) from an actual failure (where we’d
want to fail the test), so the only other option is to drop this
particular test vector. I don’t think it’s a significant loss.
This is the last fix needed to get our CI tests working reliably on
jenkins.gnome.org.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
There are various reasons why setting up a server might fail; it
reliably fails on AWS with IPv6 addresses (are we binding to the right
address?). Since we’re trying to test GSocket as a client, skip tests
where that happens.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795234
While 333 runs is very likely to reproduce the bug, Milan has previously
reproduced it with as few as 9 runs. Since this test will be run by the
CI machinery quite often, a lower number of runs each CI run will still
probably catch any regressions over time.
This reduces the total test runtime from 33s to 2s.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_network_monitor_get_default() from another thread, it’s
possible for network-changed events to be processed after an instance of
GNetworkMonitor has been disposed, causing use-after-free problems.
Fix that by moving some of the initialisation into the GInitable.init()
chain, rather than in a main context idle callback.
This includes a unit test which probabilistically reproduces the bug
(but can’t do so deterministically due to it being a race condition).
Commit amended by Philip Withnall <withnall@endlessm.com> before
pushing.
https://bugzilla.gnome.org/show_bug.cgi?id=793727
Spotted while running valgrind on gsettings-test, as per the previous
commit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
When using g_settings_bind(), if a range binding triggers a range check
failure, g_settings_binding_property_changed() will return early, but it
won't cleanup properly causing some leaks. The binding will also still
be marked as 'running', which causes an assertion failure when trying to
free it:
"g_settings_binding_free: assertion failed: (!binding->running)"
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794805
There's a race condition somewhere in GTestDBus that can result in
the next test being started at a time when g_bus_get() would still
return the connection that is in the process of closing. This can
be reproduced reasonably reliably by running the gapplication test
10K times in a loop.
Instead of relying on waiting for the weak reference to be released,
we can force the issue by clearing it.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=768996
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=894677
This adds a null notification backend implementation for win32, purely
to avoid crashes due to a missing backend when applications use
GNotification. This backend does nothing except print a warning when a
notification is supposed to be emitted.
In future, it can be expanded to use win32 API to present toaster
notifications appropriately.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776583
If glib-networking is installed and built with libproxy support, this
test will use it. If a proxy is set in the environment, we might get
correctly told to go through it for certain accesses. However, this isn't
going to work, because the testsuite monkeys with the network monitor to
tell it that all addresses - including the proxy - aren't reachable.
We're trying to check if adding networks to a GNetworkMonitor works in
general. Proxies just get in the way here, so let's use the built in
dummy proxy resolver which just tells us that all URLs are directly
accessible.
https://bugzilla.gnome.org/show_bug.cgi?id=794801
Explain why we say "See new_stateful()" (although it's pretty obvious).
Drop a redundant copy of the argument description in the body text.
Add a # to the GVariant type name so that we can have a nice link.
https://bugzilla.gnome.org/show_bug.cgi?id=795070
If something is nullable, it's always helpful to identify what NULL
means. Also, this is not the parameter for the .activate() vfunc, as we
take that over: rather, it is the parameter for the ::activate signal.
https://bugzilla.gnome.org/show_bug.cgi?id=795070
The `mount_monitor` variable is only set if the boolean
`with_mount_monitor` variable is set to TRUE, but the compiler does not
know that, so it'll warn when calling `g_clear_object()` even if the
clearing operation is gated with the same boolean.
Initializing with NULL does not cost us anything, and eliminates a
conditional branch.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
The g_auto macros are available only with GCC-compatible compilers on
Unix, but having __attribute__((cleanup)) is not part of our toolchain
requirements, so we shouldn't use it — even if we are building on
Unix-compatible systems.
https://bugzilla.gnome.org/show_bug.cgi?id=794732
Some very odd systems have the functions to initialise and destroy a
struct __res_state, but apparently not to do a DNS query using it. Fix
the compilation on those systems.
https://bugzilla.gnome.org/show_bug.cgi?id=794606
GSocketListener can keep internal references to itself for pending
accept() calls, which mean that it can stay alive (and keep listening
on ports) even after a user drops their last reference to it. They need
to call g_socket_listener_close() explicitly to avoid that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=794207
There's no need to unconditionally print an error message if xmllint or
json-glib-format are not found when running glib-compile-resources is
called; we only need to warn if they are not available when we need
them. To avoid spamming the build logs, we can also warn once.
https://bugzilla.gnome.org/show_bug.cgi?id=794285
The glib-compile-resources tool has hand-rolled "open a temporary file"
code paths. Since error handling is hard, let's rely on GLib API that is
meant to do that consistently for us.
Get rid of some tabs mixed with spaces while we're at it.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
Similarly to how glib-compile-resources can call xmllint to eliminate
whitespace in XML files to reduce their size inside a GResource, we can
use json-glib-format to achieve the same result.
The mechanism for using json-glib-format is the same, with a separate
environment variable if we want to direct glib-compile-resources to a
version of json-glib-format that is not the one in the PATH.
https://bugzilla.gnome.org/show_bug.cgi?id=794284
Normally, the list of mounts is filtered to exclude mounts in
/run/media/$username where $username is not the current user. However,
root can access all the mounts under /run/media/, regardless of the
username — so there’s no point in filtering out those mounts.
In some cases, filtering them out is harmful. In the case of a system
service which uses GVolumeMonitor, for example, filtering them out means
the service cannot see automounted USB sticks belonging to user
sessions.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793994
Tighten up the validation of application IDs so they are always exactly
D-Bus well-known names. This is a slight change to the accepted format,
but since anyone using the API with an application ID which was
previously valid, but which was not a valid D-Bus well-known name, would
have received an error from D-Bus when their application tried to
register on the bus, I think this break is acceptable.
It will affect any applications which have application IDs which are not
valid D-Bus well-known names, and which use the G_APPLICATION_NON_UNIQUE
flag. From a quick search in Debian Codesearch, no C applications use
that flag.
Update the documentation to use the rules from the D-Bus specification,
including the latest advice discouraging use of hyphens:
https://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus
Update the tests:
• Add the examples from the documentation to validate them.
• Especially the venerable 7-zip.org example.
• Move a couple of tests from expected-failure to expected-success:
they are valid D-Bus well-known names even if they’re a bit weird.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
This will make the assertion failure messages a little more useful, and
prevent the assertions being compiled out with G_DISABLE_ASSERT.
Introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793400
- Stop using a custom thread for listening to kqueue(2) events. Instead
call kevent(2) in non blocking mode in a monitor callback. Under the
hood poll(2) is used to figure out if new events are available.
- Do not use a socketpair with a custom protocol requiring 2 supplementary
context switches per event to commicate between multiple threads. Calling
kevent(2), in non blocking mode, to add/remove events is fine from any
context.
- Add kqueue(2) events without the EV_ONESHOT flag. This removes a race
where some notifications were lost because events had to be re-added for
every new notification.
- Get rid of the global hash table and its associated lock and races. Use
the 'cookie' argument of kevent(2) to pass the associated descriptor when
registering an event.
- Fix _kh_file_appeared_cb() by properly passing a monitor instead of a
source to g_file_monitor_emit_event().
- Properly refcount sources.
- Remove a lot of abstraction making it harder to fix the remaining issues.
https://bugzilla.gnome.org/show_bug.cgi?id=739424
If the GNetworkMonitorNetlink is finalised part-way through a dump
(after request_dump() is called, but before finish_dump() is called),
dump_networks was leaked. Fix that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
This should introduce no functional changes. Factor out some common
code, flip some arguments around to use the more conventional (data,
length) order, and move some memory management calls out of
if-blocks.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
By using g_timeout_source_new_seconds(), we can let timer wakeups be
coalesced by the scheduler, and reduce power consumption a bit. This
shouldn’t really affect the accuracy of the network monitoring.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
Previously, the GSource would be attached to whatever GMainContext was
the thread default at the time; but that might no longer be the same as
the default at the time of constructing the GNetworkMonitor.
Save the default from construction time, so that source callbacks are
always invoked in the same GMainContext.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793880
In doing so, ensure that g_option_context_set_ignore_unknown_options()
is always called if completion is being done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793597
In this situation:
$ gdbus emit --session --object-path /org/foo/bar --sig<tab><tab><tab>
We will currently insert --signal three times.
We should only do that once.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
Commit faf9440908 made the bash completion more
robust, but in doing so it made the optional --dest argument to `gdbus emit'
mandatory by mistake.
Remove the error case when --dest is not specified. To keep the completion
working, we shuffle the cases around. --dest should be offered up for
completion after --session/--system/--address have been supplied, so we can
complete its argument. Additionally, if --dest isn't specified then we can't
complete --object-path or --signal, so guard these completions accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
When completing, we parse the options that the user has typed so far. Up
until now we've been doing this without ignoring unknown options. This
leads to broken completions when the user has typed an incomplete
parameter.
For example, when doing the following:
$ gdbus emit --session --obj<tab>
We expect --object-path to be completed, but it is currently not. What
happens is that we fail to parse the options, therefore don't act on
--session and so don't connect to the session bus, then we early-exit
because we need to know which bus to operate on for later completions.
Instead we can ignore the half-completed --obj, parse --session, get
connected to the bus and then move on to the later completion code.
https://bugzilla.gnome.org/show_bug.cgi?id=793597
This change increases throughput when copying files for some filesystems
(Modified by Philip Withnall <withnall@endlessm.com> to add more error
handling.)
https://bugzilla.gnome.org/show_bug.cgi?id=791457
It incorrectly said that an error could only be returned if the GVariant
was incorrect for the D-Bus API, but that’s not true: an error will also
be returned if you call it on a closed GDBusConnection.
Clarify that, and mention the actual error codes which are returned.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
If calling g_subprocess_communicate() on a GSubprocess with no
stdout/stderr pipe, a critical warning would be emitted from
g_memory_output_stream_steal_as_bytes(), as it would be called on a NULL
output stream.
Fix that, improve the relevant GIR annotations, and expand the unit
tests to cover it (and various other combinations of flags).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793331
Building against libmount installed into a non-default prefix wasn’t
working, as we were using #include <libmount/libmount.h> rather than
the correct #include <libmount.h> — all the mount.pc pkg-config files
set `Cflags: -I${includedir}/libmount`.
Fixing this while retaining the fallback support for versions of
libmount without a pkg-config file would have been tricky (we would need
to work out a suitable -I flag to set in LIBMOUNT_CFLAGS) to still be
able to use the correct #include path). Thankfully, libmount gained
pkg-config support a long time ago, so I think we can safely drop the
fallback code. In particular, Debian Jessie, Ubuntu Trusty, and CentOS 5
all ship a mount.pc file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=793288
If flush_async is deleted by a child class, then calling
g_output_stream_flush_async would leave the GOutputStream in an invalid
state. I'm not aware of any GOutputStream that would be affected by this
issue, but might as well fix it.
https://bugzilla.gnome.org/show_bug.cgi?id=738277
g_variant_get_objpathv() doesn’t exist. The code actually meant
g_variant_get_objv().
This fixes a leak with `ao`-type properties in generated code.
Previously they wouldn’t be freed; now the container is (correctly)
freed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=770335
res_query() uses global state in the form of the struct __res_state
which contains the contents of resolv.conf (and other things). On Linux,
this state seems to be thread-local, so there is no problem. On OS X,
however, it is not, and hence multiple res_query() calls from parallel
threads will compete and return bogus results.
The fix for this is to use res_nquery(), introduced in BIND 8.2, which
takes an explicit state argument. This allows us to manually store the
state thread-locally. If res_nquery() isn’t available, we fall back to
res_query(). It should be available on OS X though. As a data point,
it’s available on Fedora 27.
There’s a slight complication in the fact that OS X requires the state
to be freed using res_ndestroy() rather than res_nclose(). Linux uses
res_nclose().
(See, for example, the NetBSD man page:
https://www.unix.com/man-page/netbsd/3/res_ninit/. The Linux one is
incomplete and not so useful:
http://man7.org/linux/man-pages/man3/resolver.3.html.)
The new code will call res_ninit() once per res_nquery() task. This is
not optimal, but no worse than before — since res_query() was being
called in a worker thread, on Linux, it would implicitly initialise the
thread-local struct __res_state when it was called. We’ve essentially
just made that explicit. In practical terms, this means a
stat("/etc/resolv.conf") call per res_nquery() task.
In future, we could improve this by using an explicit thread pool with
some manually-created worker threads, each of which initialises a struct
__res_state on spawning, and only updates it on receiving
the #GResolver::reload signal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792050
Some projects use child schemas in an odd way: they link children which
already have their path pre-defined. This causes the child schema (and
its keys) to be printed out twice:
- once because it is, itself, a non-relocatable schema
- once, as a recursion from its parent
We can avoid this by not recursing into child schemas that are
non-relocatable (on the assumption that they will be enumerated
elsewhere).
https://bugzilla.gnome.org/show_bug.cgi?id=723003
g_data_input_stream_read_upto() was introduced in 2.26; now it’s GLib
2.56, we can probably deprecate the old versions (since the handling of
consuming the stop character differs between the sync and async versions
of it).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=584284
Check for g_hostname_to_ascii() failure, rather than crashing when
checking whether an invalid hostname should go through the proxy.
The HTTP library should report the error about the invalid hostname
once we actually try to connect to it.
https://bugzilla.gnome.org/show_bug.cgi?id=772989
If the underlying transport is D/TLS the same data and data length
is required to be sent on the next iteration when a WOULD_BLOCK
happens. This is due to the fact that gnutls or openssl keep
an internal state for the data.
https://bugzilla.gnome.org/show_bug.cgi?id=792862
See the discussion in the bug report: with proxy support enabled, a
proxy resolver is created. Doing that will load all the GIO modules, and
typically at least one of them will try to use GDBus during
initialisation, which will cause a deadlock.
Using a TCP address with GDBusAddress is still supported, but accessing
it over a proxy is not.
Document this.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792499
In cases where gdbus-codegen is used only for docbook generation,
the execution stops with the following error message:
`Using --header or --body requires --output`
This is because it was assumed that, in addition to the docbook
generation, the header or source code were always generated.
This patch fixes this, and the header or source code generation
is not mandatory, so the docbook can be generated separately.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
Skip accumulated events from file monitor which we are not able to handle
in a real time instead of emitting mounts_changed signal several times.
This should behave equally to GIOChannel based monitoring. See Bug 792235.
https://bugzilla.gnome.org/show_bug.cgi?id=793006
This makes it more consistent with the other win32 objects in GIO. This
commit just renames the files; a follow-up commit will rename the
GObject.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=685442
Added a Windows backend to GNetworkMonitor, using NotifyRouteChange2()
(available on Vista and later). It marshals the route change callbacks
to the thread-specific default main context the GNetworkMonitor was
constructed in.
https://bugzilla.gnome.org/show_bug.cgi?id=685442
This is a variant of g_file_get_path() which returns a const string to
the caller, rather than transferring ownership.
I've been carrying `gs_file_get_path_cached()` in libgsystem and it
has seen a lot of use in the ostree and flatpak codebases. There are
probably others too.
I think language bindings like Python/Gjs could also use this to avoid
an extra malloc (i.e. we could transparently replace
`g_file_get_path()` with `g_file_peek_path()`.
(Originally by Colin Walters. Tweaked by Philip Withnall to update to
2.56, change the function name and drop the locking.)
https://bugzilla.gnome.org/show_bug.cgi?id=767976
gdbus-codegen's options only allow a simultaneous header and source
code generation.
A `--header` and `--body` options have been added along with the
`--output` option which allow separate C header and code
generation.
These options cannot be used in addition to the old options such
as `--generate-c-code`, `--generate-docbook` or
`--output-directory`.
These options have also been added to gdbus-codegen's documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The `outdir` and `docbook` parameters are passed to the
`DocbookCodeGenerator` constructor, but these parameters are only
used at docbook generation, which is optional.
The parameters have been removed from the class creation and added
to the `generate` method, where they are actually being used.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The class that generated both C header and code has been split into
two classes. These clases are now specialized on creating the header
or the body code.
All parameters that do not belong to each class have also been
deleted, so only the necessary parameters still remain. These also
includes the header and code file descriptors, leaving only the
corresponding file descriptor necessary for each class.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The generation of the C header and code preambles have been split
in order to be able to generate both files separately in the future.
The functions for generating preambles and postambles have also been
renamed following the function names used in the glib-genmarshal
rewrite, so that they stay consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The #pragma once is widely supported preprocessor directive that can
be used instead of include guards.
This adds support for using optionally this directive instead of
include guards.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
The optparse module is deprecated since version 2.7 and the
development continues with the argparse.
The code has been moved from optparse to argparse when parsing
command-line options. This has also led to the deprecation of the
`--xml-files`, and positional arguments should be used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
`glib-genmarshal` and `glib-mkenums` use a `Color` class which
implements a number of print_* methods to print colored messages
to the standard error output.
In order to be consistent with those programs' output,
`gdbus-codegen` has also started using that same class and methods.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
gtk-doc doesn’t support them any more since it was ported to Markdown,
so they end up appearing in the generated documentation, which isn’t
great.
Mostly, they were used to split up things invisibly, which we can do in
other ways.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Try and make it a bit more obvious that g_file_query_exists() is
generally A Bad Idea.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
gtk-doc was mis-parsing the combination of ` and :: and truncating some
of the documentation. Avoid that by using the D-Bus style of separating
interface and signal names using a dot.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
Because the argument being called "available" and the property being
called "network-available" is confusing.
Also remove the details of what that value means, as it's already
described in the property, and duplicating the explanation makes it look
like it might have a different meaning.
https://bugzilla.gnome.org/show_bug.cgi?id=792370
The g_dbus_connection_call() documentation doesn’t make it clear that
the reply type is always a tuple.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
The license string which is embedded in the C header and body
preambles has been moved to a global variable. This way it can be
reused in both sections.
https://bugzilla.gnome.org/show_bug.cgi?id=791015
I originally planned to introduce a new property and functions to
replace these, with the same behavior but less-confusing names. But that
might not be the best approach in the long run. Instead, let's just
deprecate them without replacement.
TLS 1.2 intolerance is no longer a thing in the wild, and no known
GTlsBackend supports TLS 1.3 yet. But you might need to use this
property in the future, even though it's deprecated, if your
GTlsBackend has added support for TLS 1.3 and you need to talk to a
server that is TLS 1.3 intolerant.
Independently of all that, these APIs simply no longer do what their
names suggest, so deprecation is sensible regardless.
https://bugzilla.gnome.org/show_bug.cgi?id=792217
The property documentation correctly indicates how this code works
nowadays, but the function documentation is obsolete and misleading.
Update it.
https://bugzilla.gnome.org/show_bug.cgi?id=792217
Custom desktop file fields may be translated, but there is currently
no non-hacky way to look up the localized value; fill get gap with
a small wrapper around g_key_file_get_locale_string().
https://bugzilla.gnome.org/show_bug.cgi?id=779413
The source object for this asynchronous operation is the GXdpOpenURI,
not a GDBusConnection. This was causing crashes in method calls on the
connection, unsurprisingly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791720
This was introduced in bug #742997, but not added to the Makefile.am, so
it’s missing from tarballs.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
https://bugzilla.gnome.org/show_bug.cgi?id=792322
Fix various strict aliasing problems caused by casting between (struct
sockaddr *) and (struct sockaddr_storage *): the correct code here is to
keep the two in a union.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791622
Commit 281e3010 narrowed the race between GCancellable::cancelled and
GCancellableSource's finalize(), but did not prevent it: there was
nothing to stop cancellation from occurring after the refcount drops
to 0, but before g_source_unref_internal() bumps it back up to 1 to
run finalize().
GCancellable cannot be expected to detect that situation, because the
only way it has to detect last-unref is finalize(), but in that
situation finalize() hasn't happened yet.
Instead of detecting last-unref, relax the precondition a little
to make it detect finalization: priv is only poisoned (set to NULL)
after the finalize() function has been called, so we can assume that
GCancellable has already seen finalize() by then.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=791754
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884654
Properly define GLIB/GOBJECT_STATIC_COMPILATION when static build is enabled.
Use library() instead of shared_library() to allow selecting static builds.
https://bugzilla.gnome.org/show_bug.cgi?id=784995
GIO modules should include their name into their exported symbols to
make them unique. This avoids symbol clash when building modules
statically.
extract_name() function is copied from GStreamer which recently
switched to the same symbol naming scheme.
https://bugzilla.gnome.org/show_bug.cgi?id=684282
In order to enrich information displayed by GApplication command line
handling when --help is invoked, 3 new methods are proposed:
. g_application_set_option_context_parameter_string
. g_application_set_option_context_summary
. g_application_set_option_context_description
Those methods interact with the GApplication's internal GOptionContext
which is created for command line parsing in g_application_parse_command_line.
(please refer to the GOptionContext class for more information about option
context, parameter string, summary and description.)
To illustrate the 3 methods, an example is provided:
. gapplication-example-cmdline4.c
to suppress a compiler error with stricter warnings enabled (GCC):
gdbus-test-codegen.c: In function ‘on_handle_get_self’:
gdbus-test-codegen.c:403:26: error: format ‘%p’ expects argument of type
‘void *’, but argument 2 has type ‘GThread * {aka struct _GThread *}’
[-Werror=format=]
s = g_strdup_printf ("%p", g_thread_self ());
https://bugzilla.gnome.org/show_bug.cgi?id=792099
The GSocketListener::event signal has a type of GSocketListenerEvent,
which is an enum. However, the vfunc signature had a pointer, with
different sizing requirements. Given the alignment and prompostion
of some systems, you may still get the same call-site layout, but
that is not guaranteed.
This fixes the parameter to have the proper enumeration.
https://bugzilla.gnome.org/show_bug.cgi?id=791906
Add filesystem magic numbers found in statfs(2) manual page. Filesystem
magic numbers that are not available from the manual page are copied
from Linux source code.
configfs is found in fs/configfs/mount.c, macro CONFIGFS_MAGIC.
fusectl is found in fs/fuse/control.c, macro FUSE_CTL_SUPER_MAGIC.
rpc_pipefs is found in net/sunrpc/rpc_pipe.c, macro RPCAUTH_GSSMAGIC.
https://bugzilla.gnome.org/show_bug.cgi?id=754634
Previously, we waited an arbitrary 100ms or 200ms and then asserted
that the events had happened, but that might fail if the machine is
slow or heavily loaded.
We still wait for an arbitrary time for negative tests (asserting
that no more signals are received) because we don't have any way
to do better here.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=884661https://bugzilla.gnome.org/show_bug.cgi?id=791744
In autotools this same check reads:
AS_IF([test $glib_native_android != yes]
with glib_native_android being defined as:
case $host in
*android*)
glib_native_android="yes"
;;
*)
glib_native_android="no"
;;
esac
This is needed to be able to compile on OSX.
https://bugzilla.gnome.org/show_bug.cgi?id=791460
Signed-off-by: Nirbheek Chauhan <nirbheek@centricular.com>
This patch considers generic icon names also when icon names
are searched based on content type. Without this fix only
non-generic icon names are found. This results in no icons
for pdf and jpeg files in the file selection dialog.
This is discussed in
https://bugzilla.gnome.org/show_bug.cgi?id=788936
New test to make sure we exercise the code paths in gdesktopappinfo.c
that get triggered when g_desktop_app_info_launch_uris_with_spawn()
is used (i.e. unknown app ID, no session bus), both for when either
a single URI or multiple ones are expected by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
If an application calls g_app_info_launch_uris() with a GList that includes
NULL values in some of its data members, and GIO ends up internally calling
g_desktop_app_info_launch_uris_with_spawn() for whatever reason (e.g. no
D-Bus session available), expand_macro() will crash due to the invalid data.
As this is considered a programmer error, use g_return_val_if_fail() in those
situations to prevent the crash from happening, but printing a warning anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=791337
This list will be modified in-place when calling expand_macro(), so pass a copy
of it instead the original pointer, that is supposed to be an input parameter
only for g_desktop_app_info_launch_uris_with_spawn().
https://bugzilla.gnome.org/show_bug.cgi?id=791337
In MacOS the file selection dialog does not show folder icons.
With this fix the folder icons are shown. The bug is described
in:
https://bugzilla.gnome.org/show_bug.cgi?id=788936
This bug fix is only partial, because this fix is only the
last resort when no mime information is available.
The thumbnail attributes would previously only be set if thumbnail::path
was included in the query — so querying for just thumbnail::is-valid
would return no results.
This fixes the behaviour of
gio info -a thumbnail::is-valid ./some-file.png
vs
gio info -a thumbnail ./some-file.png
The first command would previously list nothing. The second would
previously list a thumbnail::path and thumbnail::is-valid.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=791325
Putting a <!-- --> in plural<!-- -->s was an old hack used to fix
linking the symbol with gtk-doc when gtk-doc didn’t know about plural
forms. gtk-doc does now know about plural forms, so the hack can be
removed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_variant_get_normal_form() doesn’t necessarily return a floating
GVariant, so we have to take, rather than sink, the ref.
This fixes a lot of leaks with gdbus-codegen-generated code.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=741167
When using gdbus-codegen to produce generated code for a method with
an out parameter with a signature like 'as', make sure to include
an "(array)" annotation for that parameter.
(Reworked by Philip Withnall to improve code formatting.)
https://bugzilla.gnome.org/show_bug.cgi?id=741167
Apparently Solaris defines statbuf fields as long when Linux doesn’t, in
some cases. Cast down to the type expected by the printf() format
placeholder.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749652
Two of the vfuncs in GMountOperation need some annotations for their
element types and array sizes, otherwise g-ir-scanner comes up with
nonsense output.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=773980
Bug #786580 triggered this warning to show up in the appinfo tests if
run on a machine where no terminal except xterm is installed (for
example, a build machine). Since we didn’t warn before if xterm but no
other terminals were installed, it seems reasonable to downgrade the
warning to a debug message.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790914
If we can’t convert the inotify event mask into a GFileMonitorEvent enum
value, don’t propagate it to GLocalFileMonitor, since it hits an
assertion failure in that case.
This should no longer be possible since the previous commit to ignore
IN_Q_OVERFLOW events, but we might as well change this just in case
other bugs crop up in event mask handling.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
There’s not much we can do about them, and if they go unhandled, they
can propagate through to g_file_monitor_source_handle_event() and cause
assertion failures due to not mapping to a GFileMonitorEvent.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
That event is deprecated, and the kqueue backend can’t provide enough
information to go alongside the event (i.e. the name of the new file).
Use G_FILE_MONITOR_EVENT_DELETED instead.
Quite disappointed in the kqueue documentation for this: I cannot find a
single piece of documentation or example about how NOTE_RENAME is
supposed to communicate the new name of the file.
If it turns out that this is possible, the code can be amended again in
future. At least now it doesn’t abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776147
While gio module extension is loaded a new GProxyResolverPortal is
created to query whether it's supported. We always return FALSE when not
aunder flatpak, so we don't need to connect to the session bus in that
case. Add a helper ensure_resolver_proxy() that returns TRUE when the
proxy is created and use it in is_supported() instead of creating the
proxy unconditionally in the instance initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=790894
fstype is a const char*, and is passed to
g_file_info_set_attribute_string(), which takes a copy of it. There’s no
need to g_strdup() the FS type from various statfs/statvfs buffers
beforehand, given that the buffers are valid for the duration of this
function.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=679347
This adds g_file_load_bytes() to make it more convenient to
load the contents of a GFile as GBytes.
It includes a special casing for gresources to increase the
chances that the GBytes directly references the embedded data
instead of copying to the heap.
https://bugzilla.gnome.org/show_bug.cgi?id=790272
In the vast majority of cases, we can avoid temporary
allocations for paths in g_resources_enumerate_children().
In the case we need to add a suffix "/", we can usually just
build the path on the stack. In other cases, we can completely
avoid the strdup, which appears to only have been added for
readability. If the path is really long, we fallback to doing
what we did before, and use g_strconcat().
In the case of Builder, this saved 5.3mb of temporary
allocations in the process of showing the first application
window.
https://bugzilla.gnome.org/show_bug.cgi?id=790275
Previously, the path canonicalization for resources had liberal use of
strlen() and memmove() while walking through the path. This patch avoids
any secondary strlen() and removes all use of memmove().
A single allocation is created up front as we should only ever need one
additional byte more than then length of the incoming path string.
To keep the implementation readable, the mechanics are kept in external
functions. memrchr() was not used due to its lack of portability.
This is faster in every test case I've tested. Paths that contain
relative ../ have the most speedup.
https://bugzilla.gnome.org/show_bug.cgi?id=790310
The Python version was added for the Meson build, but we might as well
use it from autotools too, since it does exactly the same thing as the
Perl version (modulo not including a trailing linebreak, but that
doesn’t matter).
Works fine with Python 2.7 or Python 3.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790147
This will fix a few broken links in the documentation, and shut up a
load of gtk-doc warnings (but certainly not all of them).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790015
Uris may be altered by the following code, which breaks xdg-open:
file = g_file_new_for_commandline_arg (arg[i])
uri = g_file_get_uri (file);
Examples of possible uri changes:
mailto:email -> mailto:///email
magnet:?xt=urn:hash -> magnet:///?xt=urn:hash
ssh://user@host -> sftp://user@host
This patch causes that uris aren't preprocessed for locations with
scheme, however absolute and relative paths are still preprocessed.
https://bugzilla.gnome.org/show_bug.cgi?id=779182
create_cstr_from_cfstring_with_fallback() is allowed to be called when str == NULL
but create_cstr_from_cfstring() isn't which leads to warnings in the console.
Fix this by adding NULL checks into create_cstr_from_cfstring_with_fallback().
https://bugzilla.gnome.org/show_bug.cgi?id=788936
The patch basically just grabs the implementation of g_content_type_get_icon_internal()
from gcontenttype.c - the only difference is that it first converts UTI to MIME using
g_content_type_get_mime_type() and at the end frees this temporary MIME type.
https://bugzilla.gnome.org/show_bug.cgi?id=788936
This commit adds new W32-only functions to gstdio.c,
and a new header file, gstdioprivate.h.
These functions are:
g_win32_stat_utf8()
g_win32_lstat_utf8()
g_win32_fstat()
and they fill a private structure, GWin32PrivateStat,
which has all the fields that normal stat has, as well as some
extras.
These functions are then used throughout glib and gio to get better
data about the system. Specifically:
* Full, 64-bit size, guaranteed (g_stat() is forced to use 32-bit st_size)
* Full, 64-bit file identifier (st_ino is 0 when normal stat() is used, and still is)
* W32 File attributes (which stat() doesn't report); in particular, this allows
symlinks to be correctly identified
* Full, 64-bit time, guaranteed (g_stat() uses 32-bit st_*time on 32-bit Windows)
* Allocated file size (as a W32 replacement for the missing st_blocks)
st_mode remains unchanged (thus, no S_ISLNK), so when these are given back to
glib users (via g_stat(), for example, which is now implemented by calling g_win32_stat_utf8),
this field does not contain anything unexpected.
g_lstat() now calls g_win32_lstat_utf8(), which works on symlinks the way it's supposed to.
Also adds the g_win32_readlink_utf8() function, which behaves like readlink()
(including its inability to return 0-terminated strings and inability to say how large
the output buffer should be; these limitations are purely for compatibility with
existing glib code).
Thus, symlink support should now be much better, although far from being complete.
A new W32-only test in gio/tests/file.c highlights the following features:
* allocated size
* 64-bit time
* unique file IDs
https://bugzilla.gnome.org/show_bug.cgi?id=788180
The GAsyncResult documentation didn't specify the context in which the
GAsyncReadyCallback is expected to be invoked. Since asynchronous
operations can be implemented in various ways involving GSources,
threads and coroutines, it is useful to mention what the standard
expections are.
Unfortunately, since this was left undefined for so long, we can only
phrase it as a suggestion, and not as a hard requirement.
https://bugzilla.gnome.org/show_bug.cgi?id=783825
Where we were already treating GHashTables as sets, modify them to use
the set-specific APIs g_hash_table_add() and g_hash_table_contains(), to
make that usage more obvious and less prone to being broken.
Heavily based on patches by Garrett Regier <garrettregier@gmail.com>.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749371
This is needed by gnome-control-center and gnome-settings-daemon; it
makes existing checks from gunixmounts.c public.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788927
In my previous patch, I failed to call g_source_remove_unix_fd() in
order to actually stop polling the fd of the closed socket.
The test did not catch this, because the test only checks that the right
source callback is dispatched properly. I don't know how to test this.
https://bugzilla.gnome.org/show_bug.cgi?id=723655
Checks that after a GSocket is closed, a source created off it
with g_socket_create_source() will dispatch exactly once with
G_IO_NVAL.
Based on a patch by Mikhail Zabaluev
https://bugzilla.gnome.org/show_bug.cgi?id=723655
We're eventually going to drop Autotools, but in the meantime we should
probably use idiomatic options and reduce warnings.
GLib is pretty much already safe for subdir-objects to be enabled,
except in the GIO tests, where the build references files that are
generated in a different level. For that, we can use the same solution
employed by GTK+, and link the appropriate file in the right
sub-directory.
https://bugzilla.gnome.org/show_bug.cgi?id=788989
Ensure that the debug call won't crash if create_cstr_from_cfstring
returns NULL, fix the leak of that CFArrayRef, and make explicit the
failure condition of LSFindApplicationForInfo.
https://bugzilla.gnome.org/show_bug.cgi?id=788936
During testing with gdk-pixbuf I noticed failures during content type
to mime conversion. The root reason was the unsafe conversion used
in create_cstr_from_cfstring. The problem was addressed in commit
c60226e0a1 but that was reverted. I noticed the commit only
when I had fixed the problem. In addition I added a test to check
the content type to mime conversion on MacOS. This problem is
discussed in Bug #788936.
See: https://bugzilla.gnome.org/show_bug.cgi?id=788936
It adds support for source-specific multicast IGMPv3.
Allow receiving data only from a specified source when joining
a multicast group.
g_socket_join_multicast_group_ssm can be called multiple times
to allow receiving data from more than one source.
Support IPv4 and IPv6.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=740791
Closes: Bug #788401
The problem is described here:
https://bugzilla.gnome.org/show_bug.cgi?id=788401
This patch introduces the use of the xdgmime system to guess
the content type from data. So you can guess for example the
type public.svg-image from the file content of a svg file.
This patch only applies to MacOS. A test for the regression
is also included.
This reverts commit c60226e0a1.
Pushed without review. This should be reviewed on bug #788936 first.
Several issues with the patch:
• Takes the string length unnecessarily early.
• Calls CFRelease(str) before g_strdup(cstr) which could lead to
use-after-free.
• Code style issues.
• Don’t want to encourage pushing patches without review.
priv->map_object_path_to_object_proxy must be protected to avoid
concurrent access by multiple threads. Move the hash table insertion
into the critical section.
https://bugzilla.gnome.org/show_bug.cgi?id=788368
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get scheduled in a window between (100ms|250ms) and 500ms.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
On slow ARM machines doing parallel builds, there's no guarantee that
we'll get through this in 5 seconds.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=769674
"len" is only used by some platforms' implementations (as controlled
by various autoconf/#ifdef tokens) and only in a small codeblock in
those cases, but was declared based on a looser #ifdef heuristic and
in a larger scope. The result is an unused-variable warning when built
on some platforms. Move declaration to the local codeblocks that use
the variable, which also restricts it to the narrower set of platforms
where those codeblocks are used.
https://bugzilla.gnome.org/show_bug.cgi?id=689323
ssize_t is supported widely, but not universally, so use gssize instead.
Currently only one piece of code actually *needs* this change to be compilable
with MSVC, the rest are mostly in *nix parts of the code, but these are changed
too, for symmetry.
https://bugzilla.gnome.org/show_bug.cgi?id=788180
• `gdbus monitor` can’t work at all for non-message-bus connections,
since it can’t subscribe to signals.
• Other tab completions for names depend on the connection being a
message bus connection, but we still need to print `--dest` (etc.)
when tab completing them, even if we can’t print a list of
available names.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788594
This assumption breaks when, for instance:
* Called as /bin/gdbus-codegen
* Installed on Windows in a directory that is not `bin/`
For such cases, we cannot make any assumptions about the directory
structure, and must hard-code the datadir.
https://bugzilla.gnome.org/show_bug.cgi?id=786785
The return value from g_get_user_special_dir() might be NULL. Safest to
use g_strcmp0() uniformly everywhere.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=661442
If gio open exits before the program it starts fully activates, then
the dbus-daemon may avoid doing the activating method call.
This commit works around the problem by pinging the activated application,
and waiting for a reply.
Same workaround is used in gtk-launch and was used in gvfs-open before
it was replaced by gio open.
https://bugzilla.gnome.org/show_bug.cgi?id=780296
Commit 53ed180 improved mtab processing, however, also introduced bug
in code obtaining mount points. mtab was used by mistake also for
g_unix_mount_points_get implementation, which is obviously wrong and
fstab has to be used instead...
https://bugzilla.gnome.org/show_bug.cgi?id=781867
Fix get_mounts_timestamp() to not use a stat'ed mtime for /proc/ files.
Instead, use mount_poller_time if /proc/ watch is running, or otherwise
return a new generated timestamp to always assume mounts-changed, which
is safer than previous behaviour of always assuming mounts-not-changed
(as mtime never changes for /proc/ files when queried from the same
process).
We say it's safer because allows caches depending on:
g_unix_mounts_get(&time_read)
g_unix_mounts_changed_since()
to drop possibly outdated/duplicated values, as that was the case for the
GIO mounts cache used in gio/glocalfile.c which provides mount info for
g_file_query_filesystem_info() call, as described in below referenced bug.
This fix complements related commit bd9e266e11https://bugzilla.gnome.org/show_bug.cgi?id=787731
Add testcase for function g_file_query_filesystem_info()
reporting outdated info for "filesystem::readonly" attribute
when said attribute was different in a previous mounted
partition in the same device (as GIO maintains a mounts cache
per 'st_dev' stat() member).
To trigger a mount operation, testcase uses program 'bindfs'
instead of 'mount --bind' as bindfs does not require root
privileges. And 'fusermount -u' command is used to unmount said
bindfs mount.
As a reference in Fedora, 'bindfs' is installed from 'bindfs'
package and 'fusermount' from 'fuse' package (this one is installed
by default as being part of 'System Tools' group).
The test creates a directory with a file in it, then mounts it
readonly over another directory (the mountpoint), it then checks
that g_file_query_filesystem_info() for the file in it indeed reports
"filesystem::readonly" as TRUE. Then unmounts and mounts again this
time rw (not readonly), it then checks again if g_file_query_filesystem_info()
is reporting "filesystem::readonly" as TRUE, if that's the case, it
confirms the bug by opening said file in write mode.
Testcase is only added for Unix builds.
https://bugzilla.gnome.org/show_bug.cgi?id=787731
This reverts commit 8028494335.
Adding (array length=…) to a gchar* parameter causes the GIR file to
contain an array of strings, rather than an array of characters. While
we fix GIR, revert those changes.
Some of the other changes in the file (which have an explicit
(element-type) already) are fine.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=765063
The m4 and bash completion items are usable and relevant
depending on the host system's configuration. So, we check for the
presence of the programs that these items depend on, and only install
them when those programs are found.
For the Valgrind suppression files, we don't install them on Windows as
Valgrind is currently not supported on Windows.
Als fix the path where the GDB helpers are installed, as the path is
incorrectly constructed.
This will fix the "install" stage when building on Visual Studio at
least as there are some post-install steps that are related to them,
which will make use of these programs.
https://bugzilla.gnome.org/show_bug.cgi?id=783270
I’m unsure what the original reasoning for returning TRUE by default
from supports_dtls was, but it is not backwards-compatible. If a
pre-existing GTlsBackend implementation never implements the
supports_dtls vfunc, the supports_dtls() method will magically return
TRUE rather than FALSE.
Since any backend which does implement DTLS should be implementing the
supports_dtls vfunc (and no DTLS-supporting backends have actually been
merged yet; see bug #697908), it seems safer to make this slight API
break in the name of backwards compatibility than to leave it as
returning TRUE incorrectly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=787485
Language bindings have so far been unable to implement the GListModel
interface because the ::get_item virtual function returns a
non-bindable type (gpointer). The `gpointer` type gets translated into
`void` by G-I meaning that get_item() implementations can't return any
items.
We can set the return type of the get_item() vfunc explicitly to
GObject, which fixes the issue.
This patch also removes the existing (type GObject) annotation on
g_list_model_get_item(), which is necessary because if its return type
matches that of the get_item() vfunc, G-I connects the two and
propagates the 'skip' annotation from one to the other resulting in the
get_item() vfunc being hidden. There's no API break here because the
'skip' annotation makes g_list_model_get_item() invisible to G-I users
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=787271
Calling g_application_quit() ignores the hold count; this patch adds a
warning to the documentation about other code having a hold on the
application and expecting it to exist.
https://bugzilla.gnome.org/show_bug.cgi?id=737278
Setting a variable and then assigning it to itself avoids
-Wunused-but-set-variable but this specific trick is now caught by
-Wself-assign. Instead, actually use the value or don't bother
assigning it at all:
gdbusauthmechanismsha1.c: #ifdef a var decl to match its actual use use
gdbusauthmechanismsha1.c: call g_ascii_strtoll() in void context
https://bugzilla.gnome.org/show_bug.cgi?id=745723
Setting a variable and then assigning it to itself avoids
-Wunused-but-set-variable but this specific trick is now caught by
-Wself-assign. Instead, actually use the value or don't bother
assigning it at all:
gdbusauth.c: call g_data_input_stream_read_byte() in void context
gdbusauthmechanismsha1.c: value is actually used
gdbusmessage.c: use consistent preprocessor-token protection
gthreadedresolver.c: skip over bytes in data blob
httpd.c: do something useful with the value
https://bugzilla.gnome.org/show_bug.cgi?id=745723
It's not likely that the runtime of a bound language using the
introspection supports running in a process forked by a foreign
library, so that a closure programmed in that language would work
safely.
Any programming environment supporting that would probably have
its own advanced facilities for process spawning, or be able
to access the GLib spawning APIs via raw C bindings (still
represented in the introspection, (skip) only adds a flag)
and do any low-level preparatory dances as necessary for the
forked runtime.
Note that there are other APIs making use of GSpawnChildSetupFunc,
but they are usable with the closure nullified, and we cannot annotate
the closure parameters away because that would break the annotated API
for bindings; accordingly to bug #738176 comment #3, the current bindings'
users are expected to pass null.
Make it a bit more obvious when the DTLS methods aren’t implemented by a
particular TLS backend; return an invalid type rather than crashing.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://bugzilla.gnome.org/show_bug.cgi?id=752240
Instead of a full reference, which causes problems for clients that
expect a GSettings instance to stop firing signals once they drop the
last reference.
https://bugzilla.gnome.org/show_bug.cgi?id=780861
