Sadly, in C++ there's not an universal way to get what language standard
is used to compile GLib-based programs, in fact while most compilers
relies on `__cplusplus`, MSVC is defining that, but it does not use it
to expose such information (unless `/Zc:__cplusplus` arg is used).
On the other side, MSVC reports the language standard via _MSVC_LANG [1].
This complication makes us defining some macros in a very complex way
(such as glib_typeof()), because we need to perform many checks just to
understand if a C++ compiler is used and what standard is expecting.
To avoid this, define multiple macros that can be used to figure out
what C++ standard is being used.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/zc-cplusplus?view=msvc-170
This can be used to mark entire types as deprecated,
and trigger a warning when they are instantiated
and `G_ENABLE_DIAGNOSTIC=1` is set in the environment.
There's currently no convenient macros for defining
types with the new flag, but you can do:
```c
_G_DEFINE_TYPE_EXTENDED_BEGIN (GtkAppChooserWidget,
gtk_app_chooser_widget,
GTK_TYPE_WIDGET,
G_TYPE_FLAG_DEPRECATED)
...
_G_DEFINE_TYPE_EXTENDED_END ()
```
Includes a unit test by Philip Withnall.
This will make it clear what the bigger changes are between versions.
Kind of like a `NEWS` file for the specification.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This should clarify object paths and signatures a little, if anyone
needs that. This introduces no semantic changes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
reStructuredText doesn’t support cross-references unless always built
with Sphinx (as I understand it). `rst2html5` doesn‘t support them.
So reword this (currently manual) cross-reference so it’s less awkward.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
I believe the specification was originally a shorter extract of
Allison’s thesis. This left a few dangling references to requirements
which were listed in a part of the thesis not included in the
specification.
Reword them slightly so they’re not quite so awkward.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
The licensing for the original GVariant specification was not specified
in the original PDF.
However, CC-BY-SA-3.0 has been agreed by Allison, the sole copyright
holder, here:
https://gitlab.gnome.org/Teams/documentation/developer-www/-/merge_requests/108/#note_1586866
The diagrams were redrawn by me, so their licensing/copyright status is
clear.
Tested with `reuse lint` to ensure the data is machine-readable.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is a verbatim conversion of the GVariant Specification from
https://people.gnome.org/~desrt/gvariant-serialisation.pdf /
https://raw.githubusercontent.com/ostreedev/gvariant-rs/master/docs/gvariant-serialisation.pdf
to reStructuredText.
This is for several reasons:
1. The canonical copy has gone offline due to people.gnome.org being
shut down.
2. GLib is the reference implementation of GVariant, so should probably
host the specification (unless someone wants to host it on
freedesktop-specs).
3. Moving it out of a PDF and into reStructuredText should allow for
amendments. The specification has a few problems, typos and
oversights in its original form, and it would be good to canonically
fix them without having to write a separate addendum document.
This conversion is verbatim, and does not change the content of the
document at all, even to fix typos and broken links (which there are a
small number of in the PDF).
This describes what I’m labelling as version 1.0 of the GVariant
serialisation format. Updates to the specification can bump this version
number, in subsequent commits.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Similar to g_source_set_static_name, this avoids
strdup overhead for debug-only information in
possibly hot code paths.
We also add a macro wrapper for g_task_set_name that
uses __builtin_constant_p to decide whether to use
g_task_set_name or g_task_set_static_name.
Given that it can be computed using an error-prone strings comparisons it
is better to provide a variable everywhere, so that we don't have the
risk of comparing values that are always false.
Inspired by libglnx's glnx_close_fd() and glnx_autofd, these let us
have the same patterns as g_clear_object() and g_autoptr(GObject), but
for file descriptors. g_clear_fd() is cross-platform, while g_autofd
is syntactic sugar requiring a supported compiler (gcc or clang).
Now that g_close() checks for EBADF as a programming error, we can
implement the equivalent of glnx_autofd as an inline function without
needing to have errno and EBADF in the header file.
g_clear_fd() is like glnx_close_fd(), but with error checking.
The private _g_clear_fd_ignore_error() function used to implement
g_autofd is a closer equivalent of glnx_close_fd().
Signed-off-by: Simon McVittie <smcv@collabora.com>
GBookmarkFile has everything for being introspectable, but it lacks a
GType, because it can't be copied. So provide a copy function that
deeply copies all the bookmark structures.
Add tests for this.
This is like our other suite of g_set_*() based APIs to simplify and
improve correctness of setters for fields, properties, and more.
This implementation specifically handles setting string values that may
point to an offset within the current string by copying before free.
strcmp() is used directly (as opposed to g_strcmp0() due to it being in
gtestutils.h as well as to increase the chance that the compiler will
hoist the implementation.
Fixes#2747
There is currently no `dllimport` attribute on any of our function,
which prevents MSVC to optimize function calls.
To fix that issue, we need to redeclare all our visibility macros for
each of our libraries, because when compiling e.g. GIO code, we need
dllimport in GLIB headers and dllexport in GIO headers. That means they
cannot use the same GLIB_AVAILABLE_* macro.
Since that's a lot of boilerplate to copy/paste after each version bump,
this MR generate all those macros using a python script.
Also simplify the meson side by using `gnu_symbol_visibility : 'hidden'`
keyword argument instead of passing the cflag manually.
This leaves only API index to add manually into glib-docs.xml when
bumping GLib version. That file cannot be generated because Meson does
not allow passing a buit file to gnome.gtkdoc()'s main_xml kwarg
unfortunately.
Building the references requires libraries with all their symbols
available. Passing `-Dgtk_doc=true` and `-Ddefault_library=static`
should be considered a configuration error.
glib_debug is an auto option. This is clever because it allows us to
guess the best default based on the build type, while also allowing an
easy way to override if the guess is not good. Sadly, the attempt to
guess based on the build type does not work well. For example, it
considers debugoptimized builds to be debug builds, but despite the
name, it is definitely a release build type (except on Windows, which
we'll ignore here). The minsize build type has the exact same problem.
The debug option is true for both build types, but this only controls
whether debuginfo is enabled, not whether debug extras are enabled.
The plain build type has a different problem: debug is off, but the
optimization option is off too, even though plain builds are distro
builds are will almost always use optimization.
I've outlined an argument for why we should make these changes here:
https://blogs.gnome.org/mcatanzaro/2022/07/15/best-practices-for-build-options/
Specifically, Rule 4 shows all the build types and whether they
correspond to release builds or debug builds. Rule 6 argues that we
should provide good defaults for plain builds.
We had gcc-only implementations for them while both can be used in all
the supported platforms we have.
So let's just provide generic definitions, while we keep the old ones
for both consistency and retro-compatibility.
We should mention glib-mkenums in the documentation for
G_DEFINE_ENUM_TYPE and G_DEFINE_FLAGS_TYPE.
We should also mention the macros in the documentation for glib-mkenums.
This way, developers can choose the most appropriate tool for their use
case.
We have fallback in places for GNU's variadic arguments in macros, and
for static inline functions with variadic arguments as an fallback of
last resort, but going forward we are going to depend on `__VA_ARGS__`
for macros that cannot be re-implemented using a static inline function.
Fixes: #2681
Atomic primitives allow to do conditional compare and exchange but also
to get the value that was previously stored in the atomic variable.
Now, we provided an exchange function that allows to do an exchange if
the atomic value matches an expected value but we had no way to know
at the same time what was the value in the atomic at the moment of the
exchange try, an this can be useful in case that the operation fails,
for example if the current value is still acceptable for us, allowing
to do a kind of "OR" check:
gint old_value;
gint valid_value = 222;
while (!g_atomic_pointer_compare_and_exchange_value (&atomic,
valid_value, 555,
&old_value)
{
if (old_value == 555 || old_value == 222)
valid_value = old_value;
}
While it's possible to create a directory synchronously via
g_dir_make_tmp(), there's no such API that performs it asynchronously.
So implement it using GFile, using a thread to perform such task.
Listing a user in `glib.doap` is important for ensuring their access
rights are correct in GitLab (as they are synced from the DOAP file by a
sysadmin script).
When `CODEOWNERS` was written, we were assuming that GNOME’s GitLab
would get support for the `CODEOWNERS` feature in GitLab. Unfortunately,
that’s not happened, and it remains an enterprise-only feature.
As such, that means that listing a co-maintainer of GLib in `CODEOWNERS`
is not sufficient to grant them permissions to actually merge MRs or
triage issues. That means they can’t really do any co-maintaining.
So fix that by updating the DOAP from `CODEOWNERS`. This doesn’t change
the list of co-maintainers at all, or the amount of trust assumed of
anybody.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This documents what we already do, rather than trying to make any
improvements to the process. They can happen separately, later, as
they’re a little more involved than just writing a Markdown document.
For example, we really should automate some of this.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
iconv is complicated to look up. That complexity now resides in
Meson, since 0.60.0, via a `dependency('iconv')` lookup, so use that
instead.
No effort is made to support the old option for which type of iconv to
use. It was a false choice, because if only one was available, then
that's the only one you can use, and if both are available, the external
iconv shadows the builtin one and renders the builtin one unusable,
so there is still only one you can use.
This meant that when configuring glib with -Diconv=libc on systems that
had an external iconv, the configure check would detect a valid libc
iconv, try to use it, and then fail during the build because iconv.h
belongs to the external iconv and generates machine code using the
external iconv ABI, but fails to link to the iconv `find_library()`.
Meson handles this transparently.
Rather than carrying the copylib around inside GLib, which is a pain to
synchronise and affects our code coverage statistics.
This requires updating the CI images to cache the new subproject,
including updating the `cache-subprojects.sh` script to pull in git
submodules.
It also requires adding `gioenumtypes_dep` to be added to the
dependencies list of `libgio`, since it needs to be build before GVDB as
it’s pulled in by the GIO headers which GVDB includes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2603
The interface was ready for this API but it was not provided.
So implement this, using a thread that calls the sync API for now.
Add tests.
Helps with: GNOME/glib#157
This documents our existing testing best practices, and tries to explain
some of the rationale around them.
There’s some new policy around performance tests, specifying that they
are good to keep around if they are high quality (so they can be used
again, the effort put into them not thrown away, and the numbers
compared over time) and that they should be runnable automatically to
avoid bitrot.
Everything else just documents existing practice.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Atomic APIs provide a way to exchange values only if we compare a value
that is equal to the old value, but not to just exchange the value
returning the old one.
However, compilers provide such built-in functions, so we can use them
to expose such functionality to GLib.
The only drawback is that when using an old version of gcc not providing
atomic APIs to swap values, we need to re-implement it with an
implementation that may not be fully atomic, but that is safe enough.
However this codepath should really not be used currently as gcc
introduced __atomic_exchange_n() at version 4.7.4, so 8 years ago.
GArray supports a "zero_terminated" flag, but GPtrArray doesn't.
This is odd, because especially for a pointer array it makes sense
to have a %NULL sentinel. This would be for example useful to track
or construct a strv array with a GPtrArray.
As workaround for this missing feature you could use a GArray instead
(ugly) or to explicitly add the %NULL element. However the latter increases
the "len" of the array, which can be problematic if you want to still use
the GPtrArray for other purposes.
Add API for marking a GPtrArray as %NULL terminated. In that case, the
API will ensure that there is always a valid %NULL sentinel after the
array. Note that the API does not enforce that a %NULL terminated API
actually has any data allocated. That means, even with a %NULL terminated
array, pdata can still be %NULL (only if len is zero).
Add g_ptr_array_new_null_terminated() constructor. The null-terminated flag
cannot be cleared. Once the GPtrArray is flagged to be %NULL terminated, it
sticks. The purpose is that once a user checks whether a GPtrArray instance
is safe to be treated as a %NULL terminated array, the decision does
not need to be re-evaluated.
Also add a g_ptr_array_is_null_terminated(). That is useful because it
allows you to check whether a GPtrArray created by somebody else is safe
to use as a %NULL terminated array. Since there is no API to make an
array not %NULL terminated anymore, this is not error prone.
The new flag is tracked as a guint8 in GRealPtrArray. On common 64 bit
architectures this does not increase the size of the struct as it fits
in an existing hole. Note that this is not a bitfield because it's
probably more efficient to access the entire guint8. However, there is
still a 3 bytes hole (on common 32 and 64 architectures), so if we need
to add more flags in the future, we still have space for 24 bits,
despite the new flag not being a bitfield.
The biggest downside of the patch is the runtime overhead that most
operations now need to check whether %NULL termination is requested.
Includes some tweaks and additional tests by Philip Withnall.
https://gitlab.gnome.org/GNOME/glib/-/issues/353
Many idle and timeout sources are installed as "one shot": called once
and immediately removed. While it's easy to write a simple callback that
returns G_SOURCE_REMOVE, it would also be useful to have some sort of
"visual" marker when reading the code; a way to immediately see that a
callback (which may be defined elsewhere in the code) is meant to be
invoked just once.
Includes additional unit tests by Philip Withnall.
This is more efficient than calling
g_datalist_id_remove() multiple times
in a row, since it only takes the locks
once.
Allow up to 16 keys to be removed in one go.
That is enough for the use we have in GObject,
and it avoids any danger of blowing the stack.
This describes how releases are planned and scheduled, and where users
of GLib can look to see what the current (loose) roadmap is.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Make it a bit clearer in the documentation that using
`G_PARAM_STATIC_STRINGS` everywhere is a good thing.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This tries to encode all the decision making which goes on when working
out whether to backport a commit from the unstable to stable branch.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This just updates the list to reflect what we currently have in CI,
rather than any radical changes.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
These files are Markdown-ified versions of the following wiki pages:
* https://wiki.gnome.org/Projects/GLib/CompilerRequirements
* https://wiki.gnome.org/Projects/GLib/SupportedPlatforms
Keeping the files in version control with the rest of the documentation
means they should be easier to find, and easier to remember to keep up
to date.
They have not been modified other than to change to Markdown and tweak
the formatting. Content updates to them will be done in future commits.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This is part of an effort to rationalise our developer documentation a
bit, putting it all in one directory rather than cluttering up the root
directory.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
libgamin was last released in 2007 and is dead
[upstream](https://gitlab.gnome.org/Archive/gamin). Distributions may
still ship it (although Fedora no longer does), but we want people to
use inotify on Linux since it’s actively supported.
BSDs use kqueue. Windows uses win32filemonitor.
FAM might still be used on some commercial Unix distributions, but there
are no contributors from those distributions, and certainly no CI for
them to prevent regressions.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2614
It used to exist on Solaris, but GLib’s support for it was mostly
removed in 2015 in commit 21ab660cf8.
Remove the final few references.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This allows the controller to explicitly be removed from the bus, in a
way that allows the caller to synchronise with it and know that all
other references to the controller should have been dropped (i.e. after
this method returns, there should be no in-flight D-Bus calls still
holding a reference to the object).
This is needed to be able to guarantee finalisation of the controller in
unit tests (and comparable real-world situations).
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
The resources data is generated for both GCC and MSVC toolchains, even
though we know beforehand which toolchain we're going to compile it for.
By dropping the data duplication we make the generated resources file
faster to compile, especially when dealing with large embedded data,
instead of relying on the C pre-processor to walk the whole file and
discard the branch we're not using.
When working with storage (especially GInputStream or GOutputStream) it
is preferred to use page-aligned buffers so that the operating system
can do page-mapping tricks as the operation passes through the kernel.
Another use case is allocating memory used for vectorised operations,
which must be aligned to specific boundaries.
POSIX and Windows, as well as the C11 specification, provide this kind
of allocator functions, and GLib already makes use of it inside GSlice.
It would be convenient to have a public, portable wrapper that other
projects can use.
Fixes: #2574
If `GDebugControllerDBus` remains as the only, or default,
implementation of `GDebugController`, `dup_default()` cannot work.
`GDebugControllerDBus` requires a `GDBusConnection` at construction
time, which the `GIOModule` construction code can’t provide it.
Either we use a default D-Bus connection (but which one? and how would
it be changed by the user later if it was the wrong one?), or delegate
singleton handling of the `GDebugController` to the user.
The latter approach seems more flexible.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #1190
Much like GBindingGroup, the GSignalGroup object allows you to connect many
signal connections for an object and connect/disconnect/block/unblock them
as a group.
This is useful when using many connections on an object to ensure that they
are properly removed when changing state or disposing a third-party
object.
This has been used for years in various GNOME projects and makes sense to
have upstream instead of multiple copies.
Originally, GBindingGroup started with Builder as a way to simplify all
of the third-degree object bindings necessary around Model-Controller
objects such as TextBuffer/TextView.
Over time, it has grown to be useful in a number of scenarios outside
of Builder and has been copied into a number of projects such as GNOME
Text Editor, GtkSourceView, libdazzle, and more.
It makes sense at this point to unify on a single implementation and
include that upstream in GObject directly alongside GBinding.
This is intended to provide a uniform interface for controlling whether
the debug output from an application (or service) is emitted, typically
to journald, but actually to wherever the application chooses to output
it.
The main implementation of `GDebugController` is `GDebugControllerDBus`,
which is intended to be used on Linux. Other implementations may be
added in future for other platforms, or larger applications may want to
provide their own implementation which integrates with their ecosystem.
The `GDebugControllerDBus` implementation exposes a D-Bus interface at
`/org/gtk/Debugging` with a method to enable or disable debug
output at runtime.
This could be used by external harnesses, such as GNOME Builder or
systemd, to give a uniform way to get debug output from an application.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1190
This is an API analogue of the G_MESSAGES_DEBUG environment variable. It
is intended to be exposed outside applications (for example, as a D-Bus
interface — see follow-up commits) so that there is a uniform interface
for controlling the debug output of an application.
Helps: #1190
On !UNIX, return an error for send_fd() & receive_fd().
(the unixfdmessage unit is not compiled on !UNIX)
The header is installed under the common GIO include directory.
Ensure G_TYPE_UNIX_CONNECTION is registered on all platforms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The header is now also installed under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move the header under the common GIO include directory.
Sorry if it breaks any build, you had to use the correct header path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This function creates a new hash table, but inherits the functions used
for the hash, comparison, and key/value memory management functions from
another hash table.
The primary use case is to implement a behaviour where you maintain a
hash table by regenerating it, letting the values not migrated be freed.
See the following pseudo code:
```
GHashTable *ht;
init(GList *resources) {
ht = g_hash_table_new (g_str_hash, g_str_equal, g_free, g_free);
for (r in resources)
g_hash_table_insert (ht, strdup (resource_get_key (r)), create_value (r));
}
update(GList *resources) {
GHashTable *new_ht = g_hash_table_new_similar (ht);
for (r in resources) {
if (g_hash_table_steal_extended (ht, resource_get_key (r), &key, &value))
g_hash_table_insert (new_ht, key, value);
else
g_hash_table_insert (new_ht, strdup (resource_get_key (r)), create_value (r));
}
g_hash_table_unref (ht);
ht = new_ht;
}
```
Added `g_alloca0()` which wraps `g_alloca()` and initializes
allocated memory to zeroes.
Added `g_newa0()` which wraps `g_alloca0()` in a typesafe manner.
Refreshed and tweaked by Nishal Kulkarni.
Use g_macro__has_attribute to detect it instead of
hardcoding __GNUC__ || __clang__. This adds support
for a few compiler and is consistent with the rest
of the gmacros.h file.
This allows the flag to allow interactive auth to be set. Previously, it
was unconditionally unset.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This allows a pattern like
g_test_message ("cannot reticulate splines: %s", error->message);
g_test_fail ();
to be replaced by the simpler
g_test_fail_printf ("cannot reticulate splines: %s", error->message);
with the secondary benefit of making the message available to TAP
consumers as part of the "not ok" message.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Forming the g_test_skip() message from printf-style arguments seems
common enough to deserve a convenience function.
g_test_incomplete() is mechanically almost equivalent to g_test_skip()
(the semantics are different but the implementation is very similar),
so give it a similar mechanism for symmetry.
Signed-off-by: Simon McVittie <smcv@collabora.com>
g_source_set_name duplicates the string, and this is
showing up as one of the more prominent sources of strdups
in GTK profiles, despite all the names we use being literals.
Add a variant that avoids the overhead.
This should maintain equivalent functionality, apart from that now you
have to pass `--force-fallback-for libpcre` to `meson configure` in
order to use the subproject; rather than specifying
`-Dinternal_pcre=true` to use the internal copy.
This also fixes#642, as the wrapdb copy of libpcre is version 8.37.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #962Fixes: #642
On Unix platforms, wait() and friends yield an integer that encodes
how the process exited. Confusingly, this is usually not the same as
the integer passed to exit() or returned from main(): conceptually it's
an integer encoding of this tagged union:
enum { EXITED, SIGNALLED, ... } tag;
union {
int exit_status; /* if EXITED */
struct {
int terminating_signal;
bool core_dumped;
} terminating_signal; /* if SIGNALLED */
...
} detail;
Meanwhile, on Windows, wait statuses and exit statuses are
interchangeable.
I find that it's clearer what is going on if we are consistent about
referring to the result of wait() as a "wait status", and the value
passed to exit() as an "exit status".
GSubprocess already gets this right: g_subprocess_get_status() returns
the wait status, while g_subprocess_get_exit_status() genuinely returns
the exit status. However, the GSpawn family of APIs has tended to
conflate the two.
Confusingly, g_spawn_check_exit_status() has always checked a wait
status, and it would not be correct to pass an exit status to it; so
let's deprecate it in favour of g_spawn_check_wait_status(), which
does the same thing that g_spawn_check_exit_status() always did.
Code that needs backwards-compatibility with older GLib can use:
#if !GLIB_CHECK_VERSION(2, 69, 0)
#define g_spawn_check_wait_status(x) (g_spawn_check_exit_status (x))
#endif
Signed-off-by: Simon McVittie <smcv@collabora.com>
This works in the same way as g_variant_take_ref(), and for the same
reason.
Updated and Rebased by Nitin Wartkar <nitinwartkar58@gmail.com>
Closes#1112
This adds g_tls_connection_get_protocol_version(),
g_tls_connection_get_ciphersuite_name(), and DTLS variants. This will
allow populating TLS connection information in the WebKit web inspector.
This is WIP because we found it's not quite possibly to implement
correctly with GnuTLS. See glib-networking!151.
This changeset exposes
* `not-valid-before`
* `not-valid-after`
* `subject-name`
* `issuer-name`
on GTlsCertificate provided by the underlying TLS Backend.
In order to make use of these changes,
see the related [glib-networking MR][glib-networking].
This change aims to help populate more of the [`Certificate`][wk-cert]
info in the WebKit Inspector Protocol on Linux.
This changeset stems from work in Microsoft Playwright to [add more info
into its HAR capture][pw] generated from the Inspector Protocol events
and will bring feature parity across WebKit platforms.
[wk-cert]: 8afe31a018/Source/JavaScriptCore/inspector/protocol/Security.json
[pw]: https://github.com/microsoft/playwright/pull/6631
[glib-networking]: https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/156
Because sometimes you don't want a lone "%s", and you don't
want the compiler yelling at you about format strings that
don't have any format in them.
Closes#663
It is cleaner to define glib_typeof() in a header included after
gversionmacros.h so we can use GLIB_VERSION_MIN_REQUIRED directly
instead of doing it everywhere glib_typeof() is used.
This allows introspection to properly handle them as GPatternSpec
methods, as per this deprecate g_pattern_match() and
g_pattern_match_string() functions.
Fall back to compiler version checks only when `__has_attribute()` is not
available.
clang-cl doesn't define `__GNU__`, but still accepts attributes. This change
gets rid of a lot of warnings when building GLib with clang-cl. For GCC and
non-cl Clang nothing should change.
This is basically glnx_steal_fd() from libglnx. We already had two
private implementations of it in GLib.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is a simple wrapper around the new source/target FD mapping
functionality in `fork_exec()`.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #2097
This adds g_string_replace(), a function that replaces instances of one string
with another in a GString. It allows the caller to specify the maximum number
of replacements to perform, and returns the number of replacements performed
to the caller.
Fixes: #225
This will replace the existing `g_memdup()` function, which has an
unavoidable security flaw of taking its `byte_size` argument as a
`guint` rather than as a `gsize`. Most callers will expect it to be a
`gsize`, and may pass in large values which could silently be truncated,
resulting in an undersize allocation compared to what the caller
expects.
This could lead to a classic buffer overflow vulnerability for many
callers of `g_memdup()`.
`g_memdup2()`, in comparison, takes its `byte_size` as a `gsize`.
Spotted by Kevin Backhouse of GHSL.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: GHSL-2021-045
Helps: #2319
That changes the return type of functions like g_object_ref() that can
break C++ applications like Webkit. Note that it is not an ABI break.
It must thus be opt-in the same way we did when adding this to
g_object_ref() for GNU C compilers in the first place. Unfortunately it
cannot be done directly in gmacros.h because GLIB_VERSION_2_68 is not
defined there, and gversionmacros.h cannot be included there because
there is some strict ordering in which those headers must be included.
This means that applications that does not define
GLIB_VERSION_MIN_REQUIRED will still get an API break, so we encourage
them to declare their minimum requirement to avoir such issues in the
future too.
I found myself wanting to know the test that is currently being run,
where e.g. __func__ would be inconvenient to use, because e.g. the place
the string was needed was not in the test case function. Using __func__
also relies on the test function itself containing the whole path, while
loosing the "/" information that is part of the test path.
These two APIs are useful to publish an object which path content is not
controlled (e.g. dynamically built or coming from external source).
Closes#968
(Rebased and tweaked by Frederic Martinsons)
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
Even if the modules in the given directory never get chosen to be used,
loading arbitrary code from a user-provided directory is not safe when
running as setuid, as the process’ environment comes from an untrusted
source.
Also ignore `GIO_EXTRA_MODULES`.
Spotted by Simon McVittie.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #2168
Just embed a PNG instead. gdk-pixbuf deprecated its pixdata support in
version 2.32, in 2015.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #1281
This command will try to execute a desktop file, before that
it will load the input as a keyfile for checking its existence
and its validity (as a keyfile).
File arguments are allowed after the desktop file.
Closes#54
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
It search for attribute trash::orig-path and move the input file to it.
Possibly recreating the directory of orignal path and/or overwritting
the destination.
Closes#2098
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
http://isvolatileusefulwiththreads.in/c/
It’s possible that the variables here are only marked as volatile
because they’re arguments to `g_once_*()`. Those arguments will be
modified in a subsequent commit.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Helps: #600
Add a new variant of `g_time_zone_new()` which returns `NULL` on
failure to load a timezone, rather than silently returning UTC.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Fixes: #553
This commit is the unmodified results of running
```
black $(git ls-files '*.py')
```
with black version 19.10b0. See #2046.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
This function returns the most specific instantiatable type
that is a prerequisite for a given interface.
This type is necessary in particular when dealing with GValues
because a GValue contains an instance of a type.
This commit includes tests for the new API.
Rather than using a mixture of ‘instantiable’ and ‘instantiatable’
everywhere, standardise on the term which is already in the public API.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
For legacy reasons, Meson's gtk-doc helper script launches the
gtkdoc-mkhtml tool in the `html` directory under the build root. This
means that all paths must be relative to that location.
g_has_typeof macro is wrongly in the public g_ namespace, internaly
symbols are usually in the glib_ namespace. This will also allow to
define glib_typeof differently on non-GNUC compilers (e.g. c++11
decltype).
GLib uses NULL-terminated string arrays (GStrv) in a number of places, however
these are quite hard to construct in C when the number of elements is not known
in advance. GStrvBuilder wraps GPtrArray to make these easy to create with
type safety and does the memory management for you.
By default, when using g_subprocess_launcher_take_fd() to pass an
FD to a child, the GSubprocessLauncher object also takes ownership
of the FD in the parent, and closes it during finalize(). This is
a reasonable assumption in the majority of the cases, but sometimes
it isn't a good idea.
An example is when creating a GSubprocessLauncher in JavaScript:
here, the destruction process is managed by the Garbage Collector,
which means that those sockets will remain opened for some time
after all the references to the object has been droped. This means
that it could be not possible to detect when the child has closed
that same FD, because in order to make that work, both FDs
instances (the one in the parent and the one in the children) must
be closed. This can be a problem in, as an example, a process that
launches a child that communicates with Wayland using an specific
socket (like when using the new API MetaWaylandClient).
Of course, it isn't a valid solution to manually call close() in
the parent process just after the call to spawn(), because the FD
number could be reused in the time between it is manually closed,
and when the object is destroyed and closes again that FD. If that
happens, it will close an incorrect FD.
One solution could be to call run_dispose() from Javascript on the
GSubprocessLauncher object, to force freeing the resources.
Unfortunately, the current code frees them in the finalize()
method, not in dispose() (this is fixed in !1670 (merged) ) but it
isn't a very elegant solution.
This proposal adds a new method, g_subprocess_launcher_close(),
that allows to close the FDs passed to the child. To avoid problems,
after closing an FD with this method, no more spawns are allowed.
Fix: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1677
This allows programs that want to change how log messages are printed,
such as gnome-terminal (gnome-terminal#42) and Flatpak, to override
the log-writer or the legacy log-handler without having to reimplement
the G_MESSAGES_DEBUG filtering logic.
Signed-off-by: Simon McVittie <smcv@collabora.com>
GLib code normally prints info and debug messages to stdout,
but that interferes with programs that are documented to produce
machine-readable output such as JSON or XML on stdout. In particular,
if such a program uses a GLib-based library, setting G_MESSAGES_DEBUG
will typically result in that library's debug messages going to the
program's stdout and corrupting the machine-readable output.
Unix programs can avoid this by using dup2() to move the original stdout
to another fd, then dup2() again to make the new stdout a copy of stderr,
but it's easier if we provide a way to not write debug messages to
stdout in the first place. Calling
g_log_writer_default_set_use_stderr (TRUE) results in behaviour
resembling Python's logging.basicConfig(), with all diagnostics going
to stderr.
Suggested by Allison Karlitskaya on glib#2087.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The basic API that this commit adds allows in-order iterating over a GTree.
For this the following API were implemented or exported:
1) Returning the first or the last node in the tree,
2) Taking a pointer to a node in the tree and returning the previous or the
next in-order node,
3) Allowing to do a binary search for a particular key value and returning
the pointer to its node,
4) Returning the newly inserted or set node from both insert and replace
functions, so this node is immediately available and does not have to be
looked up,
5) Traversing the tree in-order providing a node pointer to the
caller-provided traversal function.
Most of the above functions were already present in the code, but they
returned the value that is stored at a particular node instead of the
pointer to the node itself.
So most of the code for these new API calls is shared with these existing
ones, just adapted to return the pointer to the node.
Additionally, the so called "lower bound" and "upper bound" operations
were implemented.
The first one returns the first element that is greater than or equal to
the searched key, while the second returns the first element that is
strictly greater than the searched key.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Expose a function that prepares an attribute query string to be passed
to g_file_query_info() to get a list of attributes normally copied with
the file. This function is used by the implementation of
g_file_copy_attributes, and it's useful if one needs to split
g_file_copy_attributes into two stages, for example, when nautilus does
a recursive move of a directory. When files are moved from the source
directory, its modification time changes. To preserve the mtime on the
destination directory, it has to be queried before moving files and set
after doing it, hence these two stages.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Like G_SOURCE_REMOVE and G_SOURCE_CONTINUE, these make it clearer what
it means to return TRUE or FALSE.
In particular, in GDBus methods that fail, the failure case still needs
to return TRUE (unlike the typical GError pattern), leading to comments
like this:
g_dbus_method_invocation_return_error (invocation, ...);
return TRUE; /* handled */
which can now be replaced by:
g_dbus_method_invocation_return_error (invocation, ...);
return G_DUS_METHOD_INVOCATION_HANDLED;
G_DBUS_METHOD_INVOCATION_UNHANDLED is added for symmetry, but is very
rarely (perhaps never?) useful in practice.
Signed-off-by: Simon McVittie <smcv@collabora.com>
There is already g_unix_mount_at function which allows to find certain
unix mount for given mount path. It would be useful to have similar
function for mount points, which will allow to replace custom codes in
gvfs. Let's add g_unix_mount_point_at.
This is a new version of the g_file_set_contents() API which will allow
its safety to be controlled by some flags, allowing the user to choose
their preferred tradeoff between safety (`fsync()` calls) and speed.
Currently, the flags do nothing and the new API behaves like the old
API. This will change in the following commits.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1302
This will allow to further enhance the parsing, without breaking API,
and also makes argument on call side a bit clearer than just TRUE/FALSE.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add some internal wrappers around sysprof tracing, so that it can be
used throughout GLib without exposing all the details of sysprof
internally.
This adds an optional dependency on `libsysprof-capture-4`. sysprof
support is disabled without it.
This depends on the GLib dependency of `libsysprof-capture` being
dropped in https://gitlab.gnome.org/GNOME/sysprof/-/merge_requests/30,
which has bumped the soname of `libsysprof-capture` and added subproject
support.
The next few commits will add marks that trace out each `GMainContext`
iteration and each `GSource` `check`/`prepare`/`dispatch` call.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
* Add g_tls_connection_get_channel_binding_data API call
* Add g_dtls_connection_get_channel_binding_data API call
* Add get_binding_data method to GTlsConnection class
* Add get_binding_data method to GDtlsConnection interface
* Add GTlsChannelBindingType enum with tls-unique and
tls-server-end-point types
* Add GTlsChannelBindingError enum and G_TLS_CHANNEL_BINDING_ERROR
quark
* Add new API calls to documentation reference gio-sections-common
Add a set of new URI parsing and generating functions, including a new
parsed-URI type GUri. Move all the code from gurifuncs.c into guri.c,
reimplementing some of those functions (and
g_string_append_uri_encoded()) in terms of the new code.
Fixes:
https://gitlab.gnome.org/GNOME/glib/issues/110
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This was mostly machine generated with the following command:
```
codespell \
--builtin clear,rare,usage \
--skip './po/*' --skip './.git/*' --skip './NEWS*' \
--write-changes .
```
using the latest git version of `codespell` as per [these
instructions](https://github.com/codespell-project/codespell#user-content-updating).
Then I manually checked each change using `git add -p`, made a few
manual fixups and dropped a load of incorrect changes.
There are still some outdated or loaded terms used in GLib, mostly to do
with git branch terminology. They will need to be changed later as part
of a wider migration of git terminology.
If I’ve missed anything, please file an issue!
Signed-off-by: Philip Withnall <withnall@endlessm.com>
These are alternatives to the existing `time_t`-based APIs, which will
soon be deprecated due to `time_t` only being Y2038-safe on 64-bit
systems.
The new APIs take a GDateTime instead.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1931
This updates gdbus-codegen.xml to include documentation for the
--symbol-decorator, --symbol-decorator-header and
--symbol-decorator-define options, which is used to help to export
symbols in the generated code.
gtk-doc 1.33 hasn’t been released yet, but when it is, it’ll contain
three fixes which are necessary for correctly detecting which symbols
are undocumented/undeclared/unused in GLib:
• gtk-doc@b866a90b
• gtk-doc@ca42972c
• gtk-doc@b922e148
1.32.1 is the development version number which will eventually be
released as 1.33.
Until then, we can’t run the gtk-doc tests in CI because they reliably
fail spuriously. See !1488.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This adds support to be able to explicitely stored interned strings into
G_TYPE_STRING GValue.
This is useful for cases where the user:
* *knows* the string to be stored in the GValue is canonical
* Wants to know whther the string stored is canonical
This allows:
* zero-cost GValue copy (the content is guaranteed to be unique and exist
throughout the process life)
* zero-cost string equality checks (if both string GValue are interned, you just
need to check the pointers for equality or not, instead of doing a strcmp).
Fixes#2109
This reverts commit c0146be3a4.
The revert was originally added because the original change broke
gnome-build-meta. Now that the problem has been diagnosed, the original
commit can be fixed — see the commit which follows this one.
See: !1487
The glib-mkenums program allows generating code to handle enums/flags
with very different purposes. One of its purposes could be generating
per-enum/flag methods to be exposed in a library API, and while doing
that, it would be nice to have a way to specify in which API version
the enum/flag was introduced, so that the same version could be shown
in the generated API methods.
E.g. From the following code:
/**
* QmiWmsMessageProtocol:
* @QMI_WMS_MESSAGE_PROTOCOL_CDMA: CDMA.
* @QMI_WMS_MESSAGE_PROTOCOL_WCDMA: WCDMA.
*
* Type of message protocol.
*
* Since: 1.0
*/
typedef enum { /*< since=1.0 >*/
QMI_WMS_MESSAGE_PROTOCOL_CDMA = 0x00,
QMI_WMS_MESSAGE_PROTOCOL_WCDMA = 0x01
} QmiWmsMessageProtocol;
The template would allow us to generate a method documented like this,
including the Since tag with the value given in the mkenums 'since' tag.
/**
* qmi_wms_message_protocol_get_string:
* @val: a QmiWmsMessageProtocol.
*
* Gets the nickname string for the #QmiWmsMessageProtocol specified at @val.
*
* Returns: (transfer none): a string with the nickname, or %NULL if not found. Do not free the returned value.
* Since: 1.0
*/
const gchar *qmi_wms_message_protocol_get_string (QmiWmsMessageProtocol val);
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
The public functions exposed as static inlines currently don't have
annotations to describe when they were introduced. This means that
compiling this file:
#include <glib.h>
void foo (void)
{
g_rec_mutex_locker_new (NULL);
}
with:
gcc -c test.c \
-I/tmp/glib/include/glib-2.0 \
-I/tmp/glib/lib/x86_64-linux-gnu/glib-2.0/include \
-Werror \
-DGLIB_VERSION_MAX_ALLOWED=GLIB_VERSION_2_28 \
-DGLIB_VERSION_MIN_REQUIRED=GLIB_VERSION_2_28
will not produce any error message, despite using
`g_rec_mutex_locker_new`, a function that was introduced after 2.28.
This patch adds some annotations to all the publicly exposed static
inline functions I could find.
I could not use the existing G_AVAILABLE* macros, because they may
expand to `extern`. This would then clash with the `static` keyword and
produce:
../glib/gthread.h:397:1: error: multiple storage classes in declaration specifiers
397 | static inline GRecMutexLocker *
| ^~~~~~
So I opted for adding a new set of macros,
GLIB_AVAILABLE_STATIC_INLINE_IN_2_XY.
With this patch applied, the example from above produces the expected
warning:
test.c: In function ‘foo’:
test.c:5:3: error: ‘g_rec_mutex_locker_new’ is deprecated: Not available before 2.60 [-Werror=deprecated-declarations]
5 | g_rec_mutex_locker_new (NULL);
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from /tmp/glib/include/glib-2.0/glib/gasyncqueue.h:32,
from /tmp/glib/include/glib-2.0/glib.h:32,
from test.c:1:
/tmp/glib/include/glib-2.0/glib/gthread.h:398:1: note: declared here
398 | g_rec_mutex_locker_new (GRecMutex *rec_mutex)
| ^~~~~~~~~~~~~~~~~~~~~~
In cases where performance are critical it can be useful to disable
checks and asserts. GStreamer has those options too, using the same name
and setting them yielding means we can set those options on the main
project (e.g. gst-build) and glib will inherit the same value when built
as subproject.
New features were added for gio tool, but they are not mentioned in
man pages as it is not generated from GOptionEntry in contrast to the
help output. Let's update the man pages to reflect the recent changes.
