6178497ff2- Update to binutils 2.31 * The AArch64 port now supports showing disassembly notes which are emitted when inconsistencies are found with the instruction that may result in the instruction being invalid. These can be turned on with the option -M notes to objdump. * The AArch64 port now emits warnings when a combination of an instruction and a named register could be invalid. * Added O modifier to ar to display member offsets inside an archive * The ADR and ADRL pseudo-instructions supported by the ARM assembler now only set the bottom bit of the address of thumb function symbols if the -mthumb-interwork command line option is active. * Add --generate-missing-build-notes=[yes|no] option to create (or not) GNU Build Attribute notes if none are present in the input sources. Add a --enable-generate-build-notes=[yes|no] configure time option to set the default behaviour. Set the default if the configure option is not used to "no". * Remove -mold-gcc command-line option for x86 targets. * Add -O[2|s] command-line options to x86 assembler to enable alternate shorter instruction encoding. * Add support for .nops directive. It is currently supported only for x86 targets. * Speed up direct linking with DLLs for Cygwin and Mingw targets. * Add a configure option --enable-separate-code to decide whether -z separate-code should be enabled in ELF linker by default. Default to yes for Linux/x86 targets. Note that -z separate-code can increase disk and memory size. * Includes riscv-relax-size.patch, riscv-relax-relocatable.patch, riscv-relax-versioned-hidden.patch and riscv-wrap-relax.patch - Refresh enable-targets-gold.diff.Richard Biener2018-07-16 08:15:08 +00:00
6a5dae2b1cAccepting request 613986 from devel:gccYuchen Lin2018-06-13 13:12:49 +00:00
2ba3d3648aAccepting request 613973 from home:Andreas_Schwab:FactoryMichael Matz2018-06-04 13:25:20 +00:00
e2096be0afAccepting request 606696 from home:a_faerber:riscvRichard Biener2018-05-14 07:39:38 +00:00
399641da3b- Update to 2.29.1 release, accumulating bugfixes. - Update binutils-2.29-branch.diff to @a38a1d80 and to be relative to the 2.29.1 release fixing PRs 22199, 22170 and 22163.Richard Biener2017-09-28 08:29:20 +00:00
f69c141e09- Update to 2.29 (@5d25156), upstream fix for PR21884, as well as PRs 18808 18841 21840 21988 21910 21962 21964.Michael Matz2017-08-30 13:08:30 +00:00
383988ae48- Last fixed for PR21884 weren't complete, adjust binutils-2.29-branch.diff some more for this.Michael Matz2017-08-11 14:01:07 +00:00
a30a0a2021- Update to 2.29 branch (@de44148c), fixing PR21884, a segfault in ld while building memtest86+ . Changes binutils-2.29-branch.diff.Michael Matz2017-08-10 14:50:48 +00:00
4b3c072b49- Update to 2.29 branch, fixing PR21847, affecting the ppc64le ABI in corner cases since 2.29 release. Adds binutils-2.29-branch.diff. - Remove binutils-2.29-gold-mips.patch, obsolete by the update.Michael Matz2017-07-31 17:17:45 +00:00
077dac8506- Add binutils-2.29-gold-mips.patch to fix build on SLE-11.Richard Biener2017-07-26 10:55:44 +00:00
db99b0ff62- Update to binutils 2.29. * The MIPS port now supports microMIPS eXtended Physical Addressing (XPA) instructions for assembly and disassembly. * The MIPS port now supports the microMIPS Release 5 ISA for assembly and disassembly. * The MIPS port now supports the Imagination interAptiv MR2 processor, which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple of implementation-specific regular MIPS and MIPS16e2 ASE instructions. * The SPARC port now supports the SPARC M8 processor, which implements the Oracle SPARC Architecture 2017. * The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly. * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * Add support for the wasm32 ELF conversion of the WebAssembly file format. * Add --inlines option to objdump, which extends the --line-numbers option so that inlined functions will display their nesting information. * Add --merge-notes options to objcopy to reduce the size of notes in a binary file by merging and deleting redundant notes. * Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. GAS * Add support for ELF SHF_GNU_MBIND. * Add support for the WebAssembly file format and wasm32 ELF conversion. * PowerPC gas now checks that the correct register class is used in instructions. For instance, "addi %f4,%cr3,%r31" warns three times that the registers are invalid. * Add support for the Texas Instruments PRU processor. * Support for the ARMv8-R architecture and Cortex-R52 processor has been added to the ARM port. GNU ldRichard Biener2017-07-26 08:42:03 +00:00
0a4a64a0d6- Update binutils-2.28-branch.diff. - Make compressed debug section handling explicit, disable for old products and enable for gas on all architectures otherwise.Richard Biener2017-03-31 10:45:35 +00:00
32d9ceffd6- Remove empty rpath component removal optimization from binutils-skip-rpaths.patch to workaround CMake rpath handling. [boo#1025282]Richard Biener2017-03-30 11:17:57 +00:00
4522633f01- Update to binutils 2.28. * Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. * This version of binutils fixes a problem with PowerPC VLE 16A and 16D relocations which were functionally swapped, for example, R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D performed like R_PPC_VLE_HA16A. This could have been fixed by renumbering relocations, which would keep object files created by an older version of gas compatible with a newer ld. However, that would require an ABI update, affecting other assemblers and linkers that create and process the relocations correctly. It is recommended that all VLE object files be recompiled, but ld can modify the relocations if --vle-reloc-fixup is passed to ld. If the new ld command line option is not used, ld will ld warn on finding relocations inconsistent with the instructions being relocated. * The nm program has a new command line option (--with-version-strings) which will display a symbol's version information, if any, after the symbol's name. * The ARC port of objdump now accepts a -M option to specify the extra instruction class(es) that should be disassembled. * The --remove-section option for objcopy and strip now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --remove-section pattern. * The --only-section option for objcopy now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --only-section pattern. * New --remove-relocations=SECTIONPATTERN option for objcopy and strip.Richard Biener2017-03-08 11:39:36 +00:00
3b9da27fe3Accepting request 477325 from home:AndreasSchwab:fMichael Matz2017-03-06 18:00:36 +00:00
4894d24449- Update to binutils 2.27. * Add a configure option, --enable-64-bit-archive, to force use of a 64-bit format when creating an archive symbol index. * Add --elf-stt-common= option to objcopy for ELF targets to control whether to convert common symbols to the STT_COMMON type. GAS: * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets. * Add --no-pad-sections to stop the assembler from padding the end of output sections up to their alignment boundary. * Support for the ARMv8-M architecture has been added to the ARM port. Support for the ARMv8-M Security and DSP Extensions has also been added to the ARM port. * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and .extCoreRegister pseudo-ops that allow an user to define custom instructions, conditional codes, auxiliary and core registers. * Add a configure option --enable-elf-stt-common to decide whether ELF assembler should generate common symbols with the STT_COMMON type by default. Default to no. * New command line option --elf-stt-common= for ELF targets to control whether to generate common symbols with the STT_COMMON type. * Add ability to set section flags and types via numeric values for ELF based targets. * Add a configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. Default to yes, except for x86 Solaris targets older than Solaris 12. * New command line option -mrelax-relocations= for x86 target to control whether to generate relax relocations. * New command line option -mfence-as-lock-add=yes for x86 target to encode lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)". * Add assembly-time relaxation option for ARC cpus.Richard Biener2016-08-24 11:55:45 +00:00
e860120c9a- Update binutils-2.26-branch.diff, updates to branch head. (bnc#970239) - Disable -mrelax-relocations by default on old products.Richard Biener2016-03-17 13:11:29 +00:00
a52f2b41ebbinutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patch binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch and s390-troo-insn-type.patchRichard Biener2016-01-28 09:15:03 +00:00
e0ce529b18- Update to binutils 2.28 * Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time workaround for a bug in the bus matrix / memory controller for some of the STM32 Cortex-M4 based products (STM32L4xx) * Add a configure option --enable-compressed-debug-sections={all,ld} to decide whether DWARF debug sections should be compressed by default. * Add support for the ARC EM/HS, and ARC600/700 architectures. * Experimental support for linker garbage collection (--gc-sections) has been enabled for COFF and PE based targets. * New command line option for ELF targets to compress DWARF debug sections, --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. * New command line option, --orphan-handling=[place|warn|error|discard], to adjust how orphan sections are handled. The default is 'place' which gives the current behaviour, 'warn' and 'error' issue a warning or error respectively when orphan sections are found, and 'discard' will discard all orphan sections. * Add support for LLVM plugin. * Add --print-memory-usage option to report memory blocks usage. * Add --require-defined option, it's like --undefined except the new symbol must be defined by the end of the link. * Add a configure option --enable-compressed-debug-sections={all,gas} to decide whether DWARF debug sections should be compressed by default. * Add support for the ARC EM/HS, and ARC600/700 architectures. Remove assembler support for Argonaut RISC architectures. * Add option to objcopy to insert new symbols into a file: --add-symbol <name>=[<section>:]<value>[,<flags>] * Add support for the ARC EM/HS, and ARC600/700 architectures. * Extend objcopy --compress-debug-sections option to support --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF targets.Richard Biener2016-01-27 13:17:46 +00:00
ada421c799- Disable use-hashtype-both-by-default.diff for the mips target, it's incompatible with it. [bnc #938658]Michael Matz2015-07-21 12:50:51 +00:00
757d724436Accepting request 316400 from home:a_faerber:rxMichael Matz2015-07-13 14:13:27 +00:00
6f8caac7e7Accepting request 315982 from home:AndreasSchwab:fMichael Matz2015-07-10 21:02:31 +00:00
Richard Biener
Yuchen Lin
Michael Matz
Dominique Leuenberger