In _g_object_unref_and_wait_weak_notify() we take a weak reference and
then call g_object_unref() in an idle callback, which may look like
we're dropping a strong reference without having one. So change the
comment to make it more clear that the reference being dropped is held
by the caller.
Now that we're not calling g_object_run_dispose() indirectly in
g_test_dbus_down() (see commit "Revert "gtestdbus: Properly close server
connections""), the test gdbus-connection-loss is failing with the
message "Bail out! GLib-GIO-FATAL-WARNING: Weak notify timeout, object
ref_count=1". This is because we're holding a reference to the singleton
connection object while calling session_bus_down() in the test's main().
So then we end up waiting for 30 seconds in
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered, which never happens.
The fix is to unref the connection before calling session_bus_down().
This is consistent with how other tests work, and is safe because the
only method called on the connection has already errored out, as
asserted by the test.
This reverts commit c37cd19fee.
Now that we've reverted the commit "gtestdbus: Properly close server
connections", g_test_dbus_down() no longer returns early and we no
longer need this workaround. Since the gdbus-names test seems to
properly unref its GDBusConnection objects it's not clear to me why it
needed the sleep to succeed. However even at the time the failure wasn't
reproducible according to this comment[1] so it's probably not worth
spending more effort trying to reproduce it now.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214235
This reverts commit baf92d09d6.
Closes#787
According to the original commit, this change was made because otherwise
g_test_dbus_down() following a g_test_dbus_stop() hangs until it times
out. The timeout being referred to is the 30 seconds which are waited by
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered when the last strong reference to the singleton
GDBusConnection object is dropped. But the patch was not correct and the
leak should have instead been fixed by having the last strong reference
holder drop their reference on the GDBusConnection before calling
g_test_dbus_down(). Timing out after 30 seconds is the desired behavior
in the case where someone holds a reference to the singleton for that
entire period.
There are a few problems with this patch. First, as pointed out here[1],
calling g_object_run_dispose() in the idle callback means we are causing
the GWeakNotify to trigger ~immediately rather than waiting 30 seconds
to give another owner a chance to unref. Second, since someone else may
still hold a reference on the object being disposed, they may call
methods on it after it's been disposed which can seg fault as documented
here[2] and as I also saw recently in another project.
It's unclear what the original leak being fixed was, but many have been
fixed between 2013 and now. I ran all the unit tests under valgrind, and
some do fail (some consistently and some intermittently) but none of the
failures seem to only happen after this reversion commit. I also
couldn't find anywhere in the valgrind output where any GDBusConnection
objects are definitely being lost.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214226
[2] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214237
For several years now (I haven’t looked up the exact date),
`gnome-terminal` has preferred being called as `gnome-terminal
--terminal-args -- /some/other/program --its-args` rather than as
`gnome-terminal --terminal-args -x /some/other/program --its-args`.
Since 2017 it has warned about uses of `-x` (see
ad4edbd118).
So we should change our calling convention for it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There seems to be no reason to do so, and since the `appinfo` test was
ported to use `G_TEST_OPTION_ISOLATE_DIRS`, it has been causing
coredumps to accumulate. `gnome-terminal` was chosen as the terminal,
but it couldn’t find its GSettings schemas due to all the XDG
environment variables being cleared to `/dev/null` by
`G_TEST_OPTION_ISOLATE_DIRS`.
In order to keep using `gnome-terminal` as a subprocess in the tests,
we’d need to explicitly set up its environment so it can load the right
GSettings schemas. That’s a lot of work for not much gain.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #436
This commit changes a comment in _g_dbus_worker_do_read_cb() to be
slightly more useful. At least in my experience debugging an
intermittent unit test failure in another project, this failure
condition occurred because although g_test_dbus_down() ensures that the
session GDBusConnection has exit-on-close set to FALSE before killing
its dbus-daemon, there was still a GDBusConnection on the system bus
which hit this failed read code path, because we had
DBUS_SYSTEM_BUS_ADDRESS set to the address of the #GTestDBus daemon, to
appease libudisks.
Also, make a few other minor improvements to the docs.
On Visual Studio, Meson builds modules as xxxx.dll, not libxxxx.dll when
xxxx is specified as the name for the shared_module() build directive.
This means that in the test programs if we expect for libxxxx for the
module name, the test will fail as there is no libxxxx.dll but there is
xxxx.dll. This makes the test program look for the module files
correctly.
This makes use of the string we now have from glib-private.h in the
last commit so that setlocale() sets the default system locale
correctly and therefore show the translated messages properly.
Fixes issue #1169.
Using the generic marshaller has drawbacks beyond performance. One such
drawback is that it breaks the stack unwinding from the Linux kernel due
to having unsufficient data to walk past ffi_call_unixt64. That means that
performance profiling by application developers looks grouped among
seemingly unrelated code paths.
While we can't fix the kernel unwinding here, we can provide proper
c_marshallers and va_marshallers for objects within Gio so that
performance profiling of applications is more reliable.
Related to GNOME/Initiatives#10
If c_marshaller is provided during g_signal_new() registration, the
automatic va_marshaller will not be set. If we leave the c_marshaller as
NULL in the simple cases, both a c_marshaller and va_marshaller will be
set for us.
This is particularly helpful when dealing with stack traces from Linux
perf, which often cannot unwind the stack beyond the ffi_call_unix64
stack-frame on x86_64.
Related to GNOME/Initiatives#10
This ensures that D-Bus connections established with unix:dir and
unix:path addresses actually work properly. Previously, we only tested
unix:tmpdir and TCP addresses.
This is not going to have much any effect currently since stop() just
disconnects a signal handler (that is going to be disconnected in
finalize anyway) and stops the socket service (that is going to be
destroyed in finalize), but it makes sense to do here for robustness.
unix:dir= addresses are exactly the same as unix:tmpdir= addresses,
already supported by GDBus, except they forbid use of abstract sockets.
This is convenient for situations where abstract sockets are
impermissible, such as when a D-Bus client inside a network namespace
needs to connect to a server running in a different network namespace.
An abstract socket cannot be shared between two processes in different
network namespaces.
Applications could use unix:path= addresses instead, so this is only a
convenience, but there's no good reason not to support unix:dir=.
Currently it is not supported simply because unix:dir= is a relatively
recent addition to the D-Bus spec.
It's somewhat unrealistic to use a GDBusServer without a
GDBusAuthObserver, because most D-Bus servers want to be like the
standard session bus (the owning user can connect) rather than being
like the standard system bus (all users can connect, the server is a
security boundary, and many bugs are security vulnerabilities).
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is simpler and more robust than DBUS_COOKIE_SHA1, which relies
on assumptions about random numbers and a secure home directory.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Authentication is about proving who I am; authorization is about
whether, given the knowledge of who I am, I am allowed to do something.
GDBusServer and GDBusConnection carry out authentication automatically,
but rely on the library user to carry out authorization.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is useful information for implementors of portable software to know
whether they can rely on credentials-passing.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously, its tests were being run in the build directory, which is
fine (it should always be writable). If multiple tests were run in
parallel, for example with Meson’s `--repeat` option, their test files
would collide.
Fix that by running each test instance in a separate subdirectory of
`/tmp`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1634
Add a case for when the IPv6 result comes back negative and the IPv4
result is significantly delayed. This is exactly the case that causes
the bug addressed by GNOME/glib!865
The "happy eyeballs" RFC states that on receiving a negative response
for an IPv6 address lookup, we should wait for the IPv4 lookup to
complete and use any results we get from there.
The current code was not doing that: it was rather setting a timeout for
failing the resolution entirely. In scenarios where the IPv4 response
comes more than 50ms after the IPv6 response (which is easily attainable
under valgrind in certain configurations) this means that the IPv4
response will never come.
Remove the timeout and just wait.
See merge request GNOME/glib!865
It should produce a generic result, but not crash. It was previously
crashing on macOS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1729
g_assert_*() give more helpful error messages on failure, and aren’t
compiled out by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was introduced in commit 7846d6154a: g_subprocess_get_identifier()
will return NULL after the subprocess has exited, and the subprocess in
the `noop` test will exit as soon as it has started spawning. So if the
scheduler scheduled the testprog subprocess quickly, descheduled the
parent test process until the testprog exited, then the return value
from g_subprocess_get_identifier() would be NULL.
Move the g_subprocess_get_identifier() test to one which calls testprog
in `sleep-forever` mode, since that is guaranteed not to exit until
killed (which we do later in the test).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The most useful ones were already listed in the pkg-config file, but
some others (notably, `gio-querymodules`) were not. List them in the
pkg-config file with their installed paths so that the right binary is
used if GIO is installed in a non-default path.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1796
`NM_STATE_CONNECTED_SITE` is documented to mean that a default route is
available, but that the internet connectivity check failed. A default
route being available is compatible with the documentation for
GNetworkMonitor:network-available, which should be true if the system
has a default route for at least one of IPv4 and IPv6.
https://developer.gnome.org/NetworkManager/stable/nm-dbus-types.html
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1788
More vectors will give an error and we can simply clamp here and
consider it like a short write instead.
In case of GSocketOutputStream this is done here instead of inside
GSocket before calling sendmsg() because we we can't generically handle
short writes when sending messages on a socket, e.g. for datagram
sockets this causes only part of the datagram to be sent and an error
would be more useful in this case than sending corrupted data.
Also reduce the fallback limit to 16 in gsocket.c as that's the minimum
value required by POSIX and add a static assertion that the limit is
never bigger than G_MAXINT as that's the type recvmmsg/sendmmsg take.
These have all been documented as deprecated for a long time, but we’ve
never had a way to programmatically mark them as deprecated. Do that
now.
This is based on the list of deprecations from the reverted commit
80fcb1bc2.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #638
This code uses, or tests, deprecated functions, types or macros; so
needs to be compiled with deprecation warnings disabled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When defining deprecated macros, annotate them with
`GLIB_DEPRECATED_MACRO_IN_*()` and `GLIB_DEPRECATED_MACRO_IN_*_FOR()` to
conditionally emit warnings if people use them, depending on their
declared minimum and maximum GLib version requirements (see
`GLIB_VERSION_MIN_REQUIRED` and `GLIB_VERSION_MAX_ALLOWED`).
The old way of doing this was for users to define `G_DISABLE_DEPRECATED`
if they didn’t want to use deprecated APIs, but it reported errors via
missing symbols, and wasn’t version-dependent. It’s being phased out.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
file_copy_fallback creates new files with default permissions and
set the correct permissions after the operation is finished. This
might cause that the files can be accessible by more users during
the operation than expected. Use G_FILE_CREATE_PRIVATE for the new
files to limit access to those files.
When an application is launched using Launch Services
osx will add an extra parameter which we were not
handling and then gapplication would abort. Instead we make
an initial parsing and like this we avoid the abort if this
parameter is provided
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1784
The caller cannot assume that the lists returned by various GSettings
functions (for example, lists of keys or schemas) will be returned in
any particular order.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1781
The parent GNetworkAddress contains a shared list of resolved
addresses that is used as a cache for multiple enumerations.
This commit ensures that the cache is only set upon completion of
DNS lookups and only read once by enumerations to avoid being in a
bad state.
Fixes#1771
We miss releasing the async operation's reference on a state object in
one of the error cases.
The call to connection_attempt_remove() (although it calls unref
internally) is not sufficient because this is releasing the reference
that the list owns.
Closes#1774
Spotted in https://gitlab.gnome.org/GNOME/mutter/issues/586. Bad input
on GAppLaunchContext environment manipulation functions is caught by
inner code, but the warning is not seemingly related.
Add precondition checks to these functions so it's clear where does the
bad input come from.
The network-available property can be asserted by querying the NMState
describing the current overval network state, instead of the
NMConnectivityState. The advantage of the NMState is that is reflects
immediately the network state modification, while the connectivity
state is tested at a fixed frequency.
Add support for mate-terminal and xfce4-terminal with higher precedence
over xterm as it's likely people that have those want to use them.
They both use the gnome-terminal `-x` switch instead of xterm's `-e`.
Some of these have a negative master/slave connotation, and they add no
value. Change or drop them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Since out-of-source-tree builds are now used after switching to meson,
we don't need .gitignore files in the source directories to ignore
build artifacts.
This fixes build errors when doing a meson build after an autotools
build, because generated files such as gio/xdp-dbus.c won't show up in
a `git status`, or be removed by a `git clean -f`, and so it won't be
obvious that such files need to be removed for the meson build to
succeed.
The `monitor` test was originally written to test GFileMonitor with
directories. Over time, `testfilemonitor` acquired units for testing
directories as well, which made the `monitor` test reduntant.
We are manually tracking the completion state of the connect task
so avoid just calling g_task_return_error_if_cancelled() without
checking that.
Fixes#1747
Currently, there is no way to prevent tests from building using meson.
When cross-compiling, building the tests isn't necessary.
Instead, only build the tests on the following conditions:
1) If not cross-compiling.
2) If cross-compiling, and there is an exe wrapper.
Other GCC-like implementations of ld/objcopy (like LLVM) don’t yet
support the right command line arguments, so can’t compile the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1709
This introduces no functional changes, but combines two duplicated lists
and makes the meson.build file a little easier to follow.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1711
After repeated local testing, I can’t reproduce failures with them:
meson test --repeat 5000 gdbus-auth
meson test --repeat 5000 gdbus-bz627724
meson test --repeat 5000 gdbus-connection
The FreeBSD failures from pthread calls mentioned in #1614 should
probably manifest as use-after-free for GMutex or pthread_mutex_t on
Linux. Failing that, I haven’t seen any relevant FreeBSD failures on CI
for at least a month, so if it’s not fixed, the chances of debugging are
very low.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1614
Add g_steal_pointer() and g_clear_object() calls in various places to
clarify the ownership transfers for GDBusMessage instances, in a bid to
understand what’s going on in this code and to try to find a
use-after-finalize problem.
This introduces no functional changes, but hopefully makes the code a
little clearer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
If the filter function for an outgoing message fails to copy the
GDBusMessage, that failure was previously ignored, and GDBusMessage
methods could be called on a NULL instance.
Avoid that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Rather than keeping a reference to the GThreadedSocketService as the
user_data for every thread pool job, add it to a member of the per-job
data struct (GThreadedSocketServiceData). This should make no
difference overall, as it’s just moving the refcounting around, but it
does seem to fix an occasional double-unref crash on shutdown where the
GThreadedSocketService is unreffed during finalisation.
In any case, it makes the object ownership clearer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Check for RTLD_NEXT being present, and disable the gsocketclient-slow
test if it's absent, since the shlib dependency of that test requires
RTLD_NEXT to function.
This allows the testsuite to be built on Cygwin, which behaves
exactly like UNIX, but doesn't have RTLD_NEXT.
On OSX both backends are built. Generally we want to use the cocoa
backend by default and in case it is not supported, i.e because
the application is not using a bundle then we should fallback
to the gtk one.
ostream_flush_cb() was calling flush_data_list_complete() with a single
element list with an item that had already been freed. This was observed
on OpenBSD where memory is overwritten with 0xdf during free():
error=0x0) at ../glib-2.58.3/gio/gdbusprivate.c:1156
1156 g_mutex_lock (&f->mutex);
(gdb) p /x *f
$74 = {mutex = {p = 0xdfdfdfdfdfdfdfdf, i = {0xdfdfdfdf, 0xdfdfdfdf}},
cond = { p = 0xdfdfdfdfdfdfdfdf, i = {0xdfdfdfdf, 0xdfdfdfdf}},
number_to_wait_for = 0xdfdfdfdfdfdfdfdf, error = 0x0}
This happened because the thread freeing the element didn't properly wait
for the asynchronous flush operation to finish.
Gnome's developer docs say: "g_cond_wait() must always be used in a loop"
https://developer.gnome.org/glib/stable/glib-Threads.html#g-cond-wait
It returns a string in the libc locale, which is not necessarily UTF-8.
Convert that to UTF-8 before returning it to the caller.
Spotted by Tomasz Miąsko.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1732
More mounts can have same mount path, but only the last one is
accessible. Thus we should always return the last matching mount from
g_unix_mount_at() and g_unix_mount_for(). This should also solve
problems with g_file_trash() on automounted filesystems, which are
caused by the recently added mount checks.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1727
instead of using a generic G_IO_ERROR_FAILED error code.
This is in line with what W32 part of the code is doing with WSAENOTSOCK.
This fix will break two tests in libsoup, which were written following
the implementation and thus expect G_IO_ERROR_FAILED when attempting to
do stuff with no-longer-valid socket descriptors.
This reverts commit 80fcb1bc26.
G_DISABLE_DEPRECATED should never be used by anybody, least of all by
GLib. We have deprecation annotations for the compiler, these days, and
they are much better suited than a macro that makes symbols appear and
disappear. The fact that gtk-doc doesn't understand the deprecation
annotations is a limitation of gtk-doc, and it's gtk-doc that ought to be
fixed.
Commit 80fcb1bc broke GStreamer, which disables old API that was
deprecated before the introduction of the deprecation annotations, but
still uses newly deprecated one, and relies on the deprecation
annotations to do their thing. It also broke libsoup, as it uses
GValueArray in its own API.
Just skip the test if the unix transport isn’t supported. This means we
get better compilation coverage, and more explicit TAP output saying
that the test is being skipped on unsupported platforms.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The specification doesn’t explicitly say this, but it doesn’t say
otherwise, and it would be pretty weird to have an empty transport name
or key.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
No need for the `meaningless` label and some unreachable if-branches.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While gtk-doc can currently detect a link to a symbol which has been
pluralised by adding ‘s’, it can’t detect when ‘es’ is added. While
that’s being fixed, reword the documentation so the links are generated
correctly anyway.
gtk-doc fix here: https://gitlab.gnome.org/GNOME/gtk-doc/merge_requests/22
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As pointed out by gtk-doc, these are all symbols which have been marked
as deprecated, but which aren’t protected by a deprecation guard. We
can’t use G_DEPRECATED_IN_* for them, as they are all non-function
symbols. Instead, wrap them in #ifndef G_DISABLE_DEPRECATED.
In some cases, we also need to wrap one or two functions which use the
deprecated types in G_DISABLE_DEPRECATED too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
If using the --interface-info-{body,header} options to gdbus-codegen,
and the first interface to be outputted has no methods, but does have
properties or signals, an uninitialised variable would be used for the
property/signal ‘since’ values.
In other situations, the ‘since’ value for a prior method would have
been incorrectly used for the properties/signals.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The test performs implicit autolaunching of a bus
and checks if it is connectible.
In build the test is moved from "only non-windows with have_dbus_daemon"
to "anywhere".
This is intentional: actually it doesn't execute any external
binaries on unix (so doesn't require dbus_daemon)
and now has win32 implementation.
The test has some problems that are not problems of test itself,
but are reasoned by current win32 implementation:
- since the implementation uses global win32 kernel objects
with fixed names not depending on g_get_user_runtime_dir or other context
if preexisting bus running by some other libgio-using application
the test would silently pass.
- since the implementation uses problematic time-based synchronization,
that has a race condition between opening and reading mmaped address,
the test may randomly fail (I'd not seen this in practice).
- since the implementation autolaunched process works for 3 seconds
after last client disconnects, the executed subprocess runs for 3 seconds
after test exit, maybe locking the libgio-2.0-0.dll file for that time.
This is a bit of breaking change:
After this commit the apps relying of win32 dbus autolaunching,
need to install gdbus.exe alongside with libgio-2.0-0.dll.
A new command for gdbus tool is used for running server:
gdbus.exe _win32_run_session_bus
To implement it gdbus.exe uses the same exported function
g_win32_run_session_bus that earlier was used by rundll.
So (private) ABI was not changed.
It runs the bus syncronously, exiting after inactivity timeout -
all exactly like it was runed earlier with the help of rundll32.
While private exported function may have _some_
version compatibility issues between gdbus.exe and libgio-2.0-0.dll
compiling dbus server registration logic directly into gdbus.exe
can lead to _more hidden and more complex_ compatibility issues
since the names and behaviour of syncronization objects
used to publish server address would be required compatible between
gdbus.exe and libgio-2.0-0.dll.
So using "private" exported function to call
looks like more safe behaviour.
gdbus.exe binary was selected for this task since
it has corresponding name and at least for msys2 is shippied
in same package with libgio-2.0-0.dll
turn_off_the_starting_cursor function is also kept as is,
however it is not obvious if it is still needed
(by now I failed reproducing original issue).
Explicit g_warnings added to help with possible
problematic cases for absent or incompatible gdbus.exe
Mainloop is created after successful daemon creation
Before this change the function leaked mainloop on daemon creation fail
nm_conn_to_g_conn already handles UNKNOWN like NONE (returning
G_NETWORK_CONNECTIVITY_LOCAL in both cases). So in sync_properties
we should also set new_connectivity to G_NETWORK_CONNECTIVITY_LOCAL
for both NM_CONNECTIVITY_UNKNOWN and NM_CONNECTIVITY_NONE.
This has the added benefit that when NetworkManager returns the network
connectivity is UNKNOWN, we set network_available to FALSE as it should
be. Previously, there were cases in a laptop with no network access,
that g_network_monitor_get_network_available returned true, which was
wrong and is also fixed with this commit.
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
g_assert_*() give more informative error messages on failure, and can’t
be disabled by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This allows referencig them from more than single .c file.
Implementation moved without changes
from gdbusaddress.c to gdbusprivate.c
g_win32_run_session_bus signature also kept, so ABI unchanged.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1566
Short names were used in win32 implementation to allow launching
on installations where full path to libgio-2.0-0.dll contain spaces.
However, short names are optional on windows: so if they were disabled
that method fails - see issue linked above.
Since rundll32 doesn't support neither spaces, nor quotes in cmdline
this patch changes rundll32 argument to just .\gio-dll-name.dll
and uses the entire path directory containing gio dll as rundll32
current directory.
Added comments informing about potential subtleties discovered during
writing test for gdbusaddress on win32.
There are not known to have real-world user-visible effect,
so by now I'm only adding comments without creating issues.
Commit f975858e86 removed the NULL check in g_cancellable_cancel() by
accident which makes it crash when called with NULL.
Add the check back and add a test so this doesn't happen again.
Fixes#1710
Implement the approach suggested in
https://gitlab.gnome.org/GNOME/glib/merge_requests/276
1. Try to open O_RDWR. On success, pass that fd
2. If EACCESS => fail the trash op, we "need" read-write to successfully trash it
3. If EISDIR => re-open the fd with O_PATH, and pass that (which will fail on snap,
but verify the dir for flatpaks)
Don’t pollute the build directory with files generated by running the
test.
Note that there are still other tests in the gsettings.c test suite
which use the build directory, but fixing them is a bit more involved
than I have time for right now. This is a step in the right direction.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
res_ninit() requires the __res_state struct passed to it to be
zero-filled on FreeBSD.
Spotted and analysed by Ashish SHUKLA.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes#1697
Synchronize access to cancelled flag of cancellable, which was
previously access without synchronization in g_cancellable_is_cancelled.
Use atomic operations instead of existing global mutex, to avoid
serializing calls to g_cancellable_is_cancelled across all threads.
Ensure that source is attached to the context before it migth be used
from another thread, since otherwise operation on source are
unsynchronized and not thread-safe.
In particular there was a data race between g_source_attach and
g_source_set_ready_time (used from g_file_monitor_source_handle_event).
This essentially reverts commit
cffed58737.
The preceding two commits have fixed the test so it’s no longer flaky.
The following command gives 5000 passes in a row for me:
meson test -C /opt/gnome/build/glib/ socket-service --repeat 5000
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1679
It’s occasionally possible for the cancellation of the service to happen
before connection_cb() gets scheduled in the other thread. The
locking/unlocking order of mutex_712570 requires:
• test_threaded_712570(): lock mutex
• test_threaded_712570(): start wait loop
• connection_cb(): lock mutex
• test_threaded_socket_service_finalize(): unlock mutex
• test_threaded_712570(): end wait loop
• test_threaded_712570(): unlock mutex
Fix that by quitting the main loop once connection_cb() has been called
(i.e. once the server thread has received the incoming connection
request), rather than just after the client thread (main thread) has
sent a connection request.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
On about 1 in 3 test runs, the socket-service would fail with the
ref_count assertion in connection_cb() failing (the ref_count would be 3
rather than the expected 2).
This was happening because the GTask from
g_socket_listener_accept_socket_async() now always takes at least one
main context iteration to return a result (whereas before
6f3d57d2ee it might have taken zero), but
the ref_count can drop below 3 before the process of returning a result
starts. During the process of returning a result, the ref_count
temporarily increases again, which is what was breaking the test.
Fix this by waiting for one more main context iteration. This is a bit
of a hack, but the real fix would be to expose the outstanding_accept
boolean from GSocketService as public API (which the test can
interrogate), and that seems too much like exposing internal state.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
Almost everything that needs gioenumtypes.h also needs
gobjectenumtypes.h. Fixes:
ccache cc @gio/win32/gio@win32@@giowin32@sta/gwin32filemonitor.c.obj.rsp
In file included from ../gio/win32/gwin32filemonitor.h:25:0,
from ../gio/win32/gwin32filemonitor.c:26:
../glib/glib-object.h:37:10: fatal error: gobject/gobjectenumtypes.h: No such file or directory
#include <gobject/gobjectenumtypes.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
GIO modules built with MSVC do not begin with 'lib', but they can
begin with 'gio'. Without this, you can only load GIO modules built
with MSVC that are `name.dll`, not `gioname.dll`.
Eliminate several cases of splitting sentences between multiple
translatable strings, and remove some newlines from the translatable
strings (they always need to be present, and can confuse translation, so
add them unconditionally afterwards).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Compilers get confused when variables are initialized by a function by
taking them as reference in an out argument; this, coupled with the fact
that C does not initialize variables by default, most commonly results
in a "maybe uninitialized" compiler warning.
512e9b3b34 added a call to schedule_pending_close() in the read
callback after the reference to the worker is already gone. In case this was
the last reference to the worker this resulted in a use-after-free.
6f3d57d2ee made this more likely to happen because on connection close
the worker cancel action is now async while the reference to the worker
gets dropped right away.
Move the call to schedule_pending_close() before the unref.
Fixes#1686
When testing as root, changing the permissions of the keyfile will have
no effect on the writability since root bypasses these permissions. See
path_resolution(7). Skip the test in this case.
g_assert_*() give more informative error messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
getsockname() returns the address that the socket was bound to.
If it was bound to INADDR_ANY, getsockname() will stubbornly return INADDR_ANY
(and someport - that one is valid).
Subsequent connection attempts to INADDR_ANY:someport will fail with winsock.
Actually, it doesn't make even sense to connect to INADDR_ANY at all
(where is the socket connecting to? To a random interface of the host?),
so this is just a straight-up change, without platform-specific ifdefing.
Use loopback instead of INADDR_ANY. To ensure that binding and creation
of INADDR_ANY is still tested, use two addresses: bind to INADDR_ANY,
but connect to loopback, with the port number that we got from the bound
address.
Use a static GQueue to form the GList of mounts by appending (which
is fast, because GQueue tracks the tail pointer of its internal GList),
then return that GList. This way we don't need to form the list
by prepending, which would have made it necessary to reverse it before
returning.
If the list is not ordered correctly, local drives in GTK places sidebar
are shown in reverse order.
The gsocketclient-slow test needs this, otherwise connect() succeeds
immeidately and the test fails, because it is checking that cancellation
works. We weren't installing it for installed tests.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
There's no /tmp directory on Windows.
Use g_get_tmp_dir(), and adjust the test to work with that.
The test *still* checks the basename of the new CWD, it just
doesn't need to be "tmp" anymore.
envp in spawn() functions is the *whole* environment table
for the child process. Including PATH. Thus, unless PATH is explicitly
put into that table, the process will be spawned without PATH.
Since on Windows binaries are found via PATH instead of LD_LIBRARY_PATH
or whatever, almost no program (unless installed in WINDIR, maybe)
can run without a PATH. Certainly not test programs - meson
adds bld subdirs to the PATH to make sure that test programs
use uninstalled glib at runtime.
So make sure that PATH is passed along.
Windows \r\n EOLs strike again. The test already knows about LINEEND,
so make it use LINEEND more (instead of swithcing pipes
to binary mode). This also applies to counting the bytes
read.
With winsock sending messages to NULL results in G_IO_ERROR_NOT_CONNECTED
instead of G_IO_ERROR_FAILED.
MSDN says:
WSAENOTCONN
10057
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected
and (when sending on a datagram socket using sendto) no address was supplied.
So this is a direct mapping of the implementation error.
Covering it up in the wrapper (by converting it to G_IO_ERROR_FAILED)
doesn't seem feasible or needed (no one, except for the testsuite,
really cares which unrecoverable error is returned by sendto()).
getaddrinfo() in winsock can't understand scope IDs.
There's no obvious way to fix that, short of re-implementing
that function, so disable that part of the test on Windows.
G_RESOURCE_OVERLAYS is a list of resource-path and filesystem-path pairs.
Since on Windows filesystem paths use ':', this list can't be ':'-separated
there. Fix that by making it ';'-separated on Windows. Make the parser
error clearer (we're not looking for a slash, we're looking for an absolute
path).
If a URI can't be handled by by WinHTTPVfs, it should pass that URI
along to the URI parser of the wrapped Vfs, not to its generic parser.
Theoretically, generic parser should also be able to handle URIs,
but this is subject to Vfs semantics.
In case of Windows, the wrapped Vfs is GLocalVfs, which is *local* and
treats any generic names as either file:// URIs or as filesystem
paths. It only ever treats URIs as URIs when they are passed
to its URI parser. This breaks the testsuite when g-icon GIO test passes
unhandleable sftp:// URI, and expects it to come through unmolested,
yet GLocalVfs, getting that URI as a generic parse name, treats it as
a filesystem path, and then "canonicalizes" it by prepending CWD.
Fix this by making WinHTTPVfs pass any URIs it gets to the URI parser
of the wrapped Vfs. This way unknown URIs remain URI-ish. This seems
like a reasonable things to do, since the URI parser should not be
given anything other than URIs, so there's no reason to try generic
parsing with these strings.
Closes: #875
