This is really just a very crude and limited conditional breakpoint.
Update the documentation to explain conditional breakpoints in
gdb instead. Also, remove the link to refdbg, which appears dead.
https://bugzilla.gnome.org/show_bug.cgi?id=719687
Take this test out of 'make check'. It's causing problems for a lot of people
due to fact that it's essentially a forkbomb. It's causing failures for Debian
on ARM and it's DoSing coredumps to system crash collectors.
The conditional only covers registration of the master, not the
subprocess parts. This is because g_test_slow() always return FALSE in
the subprocesses, so they would fail to run if we didn't register them
unconditionally.
This is the sole piece of code in GLib where we make use of the
stack growing direction. And this test proves that we have been
getting the direction wrong all these years...
The signals queued while notify is frozen are emitted in
reverse order, while omitting duplicates. The lack of documentation
for this was pointed out in
https://bugzilla.gnome.org/show_bug.cgi?id=607016
In Windows development environments that have it, <unistd.h> is mostly
just a wrapper around several other native headers (in particular,
<io.h>, which contains read(), close(), etc, and <process.h>, which
contains getpid()). But given that some Windows dev environments don't
have <unistd.h>, everything that uses those functions on Windows
already needed to include the correct Windows header as well, and so
there is never any point to including <unistd.h> on Windows.
Also, remove some <unistd.h> includes (and a few others) that were
unnecessary even on unix.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
Assume all supported platforms implement C90, and therefore they
(correctly) implement atexit(), memmove(), setlocale(), strerror(),
and vprintf(), and have <float.h> and <limits.h>.
(Also remove the configure check testing that "do ... while (0)" works
correctly; the non-do/while-based version of G_STMT_START and
G_STMT_END was removed years ago, but the check remained. Also, remove
some checks that configure.ac claimed were needed for libcharset, but
aren't actually used.)
Note that removing the g_memmove() function is not an ABI break even
on systems where g_memmove() was previously not a macro, because it
was never marked GLIB_AVAILABLE_IN_ALL or listed in glib.symbols, so
it would have been glib-internal since 2004.
https://bugzilla.gnome.org/show_bug.cgi?id=710519
GMappedFile is current unintrospectable, because it's not a registered
box type. It already has reference counting functions, so there's
little reason not to box it.
This commit adds GMappedFile to the hoard of other boxes types handled
by gboxed.c
https://bugzilla.gnome.org/show_bug.cgi?id=712393
Rather than keeping a global list of objects that are being
constructed, use qdata on the object itself like we do with several
other properties now.
https://bugzilla.gnome.org/show_bug.cgi?id=661576
If a constructor() implementation created an object but then unreffed
it rather than returning it, that object would get left on the
construction_objects list, which would cause problems later when that
memory location got reused by another object.
"Fix" this by making it fail intentionally, and add a test for it (and
for the normal, working singleton case).
https://bugzilla.gnome.org/show_bug.cgi?id=661576
GBindingTransformFunc called its arguments "source_value" and
"target_value", but in the transform_from function of a bidirectional
binding, "source_value" comes from the target object, and
"target_value" comes from the source object, which quickly gets
confusing if you need to use g_binding_get_source(), etc, in the
function.
Of course developers can call their transform function arguments
whatever they want, but many will copy from the headers/docs to start
out, so use less confusing names here ("from_value" and "to_value").
Also, fix the documentation to describe the bidirectional case
correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=709440
Add NULL check and return after calls to g_param_spec_internal in GParamSpec
creation functions. This avoids glib crashing due to things like badly named
properties.
https://bugzilla.gnome.org/show_bug.cgi?id=707887
Apple's GCC compilers cannot deal well with 64-bit pointers in
transparent unions on ppc64, so compilation of
_G_DEFINE_BOXED_TYPE_BEGIN was failing. Fortunately glib already
provides a fallback for compilers that can't deal with it; this adds
this specific case to the check.
https://bugzilla.gnome.org/show_bug.cgi?id=647145
g_type_class_add_private() was doing
g_assert (node->data->instance.private_size <= 0xffff);
but that field is a guint16, so the check was a no-op. (Noticed by
clang, but not gcc for some reason.) Fix it to do the math in a gssize
variable and do the bounds checking there before updating the struct
field.
https://bugzilla.gnome.org/show_bug.cgi?id=706888
Convert {glib,gobject,gio}/tests to use the automake TAP driver
and test harness instead of gtester. To do so, we add a glib-tap.mk
that provides the same interface as glib.mk, except for the
reporting and coverage testing functionality. Eventually, we may
want to replace glib.mk with it. I've not yet converted the
toplevel tests/ directory, since it mixes gtestutils tests with
other binaries.
https://bugzilla.gnome.org/show_bug.cgi?id=692125
Fix the warnings when compiling and linking the probes files by
calling dtrace with all the -W flags removed from CFLAGS (since dtrace
generates bad C code), and with CC set to "libtool --mode=compile ..."
(so that it will output a proper .lo file and libtool won't warn when
linking it into the .la).
https://bugzilla.gnome.org/show_bug.cgi?id=693335
Just like g_object_notify, check for a zero ref_count in
g_object_notify_by_pspec and leave if it is 0.
This allows using functions in ->finalize() that possibly also
notify a property change on the object. Previously,
this resulted in an error from g_object_ref.
https://bugzilla.gnome.org/show_bug.cgi?id=705570
We need a TypeName_private_offset variable defined by the macros used to
register dynamic types. We also need to call the adjust_private_offset()
function inside class_init(). G_ADD_PRIVATE_DYNAMIC only sets the size
of the private data structure, and relies on the behaviour of the
g_type_class_adjuset_private_offset() function to register the private
data structure at class init time if passed a value greater than zero.
This allows using G_PRIVATE_OFFSET with dynamic types.
Otherwise in e.g. the gnome-ostree integrationtest system, we
end up sending SIGUSR1 to the *entire session*, which triggers
various badness in untested debugging paths from gnome-session.
This test worked when compiled without optimization, but fails with
-O2. Presumably we just happened to find the GMainLoop off the stack
somewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=704267
GPid is a HANDLE (aka void *) on Windows, not an int, so treat pid
accordingly on Windows, as using pid as a gulong directly would likely be
undesirable on Windows
https://bugzilla.gnome.org/show_bug.cgi?id=704447
- Mention G_SOURCE_CONTINUE and G_SOURCE_REMOVE in the GSourceFunc doc;
- Mention G_PARAM_READWRITE and G_PARAM_STATIC_STRINGS in the
GParamFlags doc;
- Fix "Since:" version for G_DEFINE_ABSTRACT_TYPE_WITH_PRIVATE;
- Fix typo.
https://bugzilla.gnome.org/show_bug.cgi?id=704250
For the glib-defined source types, and any source type that defines a
closure callback but not a closure marshal, use
g_cclosure_marshal_generic. And then remove all the other remaining
source closure marshals.
https://bugzilla.gnome.org/show_bug.cgi?id=701511
When using the GLIB_VERSION_MAX_ALLOWED macro to define the upper bound
of allowed API the G_DEFINE_TYPE_EXTENDED starts warning about the newly
added g_type_class_adjust_private_offset() function; this effectively
introduces a run-time dependency on GLib 2.38 even if we don't use its
API explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=703191
As it turns out, we have examples of internal functions called
type_name_get_private() in the wild (especially among older libraries),
so we need to use a name for the per-instance private data getter
function that hopefully won't conflict with anything.
For static types, it should be possible to register a private data
structure right when we are registering the type, i.e. from the
get_type() implementation. By allowing this, we can take advantage of
the existing type definition macros to cut down the amount of code
necessary (as well as the knowledge baggage) when creating a new type.
The main issue with this new feature is that it cannot be mixed with the
old idiomatic way of adding private instance data by calling a function
in the middle of the class_init() implementation, as that imposes the
additional constraint of initializing the whole type hierarchy in order
to retrieve the offset of the private data in the GTypeInstance
allocation.
For this reason we are going to follow a two-step process; in the first
step, we are going to introduce the new (semi-private) API to register
the intent to add private instance data from within the get_type()
implementation, and hide it behind a macro; at the same time, the
G_DEFINE_TYPE_EXTENDED macro is going to be modified so that it will
register the private instance data if the macro was used, using a new
(semi-private) function as well. Once we have migrated all our code, we
will make the first new function perform the actual private data
registration, and turn the second new function into a no-op. This should
guarantee a transparent migration of existing code to the new idiomatic
form.
https://bugzilla.gnome.org/show_bug.cgi?id=700035
The automatic memory management of GBinding is not optimal for high
order languages with garbage collectors semantics. If we leave the
binding instance inert but still referenced it will be leaked, so one
solution that does not throw away the baby of C convenience with the
bathwater of language bindability is to have unbind() perform an
implicit unref().
Hopefully, C developers will read the documentation and especially the
note that says that after calling unbind() the reference count on the
GBinding instance is decreased.
https://bugzilla.gnome.org/show_bug.cgi?id=698018
We have turned up enough cases of this being done (including GTK API
allowing apps to do this to GtkSettings well after it has been
instantiated) that it is clear that we cannot really break this feature
while claiming to be backwards compatible.
For that reason, it becomes a warning rather than a critical (ie: it is
still well-defined behaviour, but you are discouraged from doing it).
The intention is to keep this feature for at least the next while.
A given GObjectClass will be able to avoid using GParamSpec pool for as
long as you don't install properties after init. If you do that, you
will get a warning and we will devolve to using GParamSpecPool.
https://bugzilla.gnome.org/show_bug.cgi?id=698614
Perform a substantial cleanup of the build system with respect to
building and installing testcases.
First, Makefile.decl has been renamed glib.mk and substantially
expanded. We intend to add more stuff here in the future, like canned
rules for mkenums, marshallers, resources, etc.
By default, tests are no longer compiled as part of 'make'. They will
be built when 'make check' is run. The old behaviour can be obtained
with --enable-always-build-tests.
--disable-modular-tests is gone (because tests are no longer built by
default). There is no longer any way to cause 'make check' to be a
no-op, but that's not very useful anyway.
A new glibtests.m4 file is introduced. Along with glib.mk, this
provides for consistent handling of --enable-installed-tests and
--enable-always-build-tests (mentioned above).
Port our various test-installing Makefiles to the new framework.
This patch substantially improves the situation in the toplevel tests/
directory. Things are now somewhat under control there. There were
some tests being built that weren't even being run and we run those now.
The long-running GObject performance tests in this directory have been
removed from 'make check' because they take too long.
As an experiment, 'make check' now runs the testcases on win32 builds,
by default. We can't run them under gtester (since it uses a pipe to
communicate with the subprocess) so just toss them in TESTS. Most of
them are passing on win32.
Things are not quite done here, but this patch is already a substantial
improvement. More to come.
GObject has previously allowed installing properties after class_init
has finished running. This means that you could install some of your
own properties on G_TYPE_OBJECT, for example, although they wouldn't
have worked properly.
A previous patch asserted that this was not true and we had to revert it
because it broke the shell. Instead of reverting, we should have used a
critical, so do that now.
Complaints go to this bug:
https://bugzilla.gnome.org/show_bug.cgi?id=698614
We previously hold a lock in the loop that collects the arguments for
g_signal_emit(), which we drop before calling into the argument
collection functions and reacquire again at the bottom of the loop (ie:
one release/acquire pair for each argument collected). To make matters
worse, the lock is just released again after the loop.
Presumably that was done to protect the access to the parameter array,
but it's pretty unlikely that this is needed because the only way it
changes is if the signal is unloaded. That only happens when unloading
types which is quite unlikely to happen while we are emitting on an
instance of that type (and, as an aside, never happens anymore anyway).
If we move the unlock below the loop up above it and remove the
acquire/release pair from the loop, we improve performance in the new
arg-collecting performance tests by ~15% (more like ~18% in the case
where we only emit to one handler -- where argument collection dominates
more).
https://bugzilla.gnome.org/show_bug.cgi?id=694380
Back in the far-off twentieth century, it was normal on unix
workstations for U+0060 GRAVE ACCENT to be drawn as "‛" and for U+0027
APOSTROPHE to be drawn as "’". This led to the convention of using
them as poor-man's ‛smart quotes’ in ASCII-only text.
However, "'" is now universally drawn as a vertical line, and "`" at a
45-degree angle, making them an `odd couple' when used together.
Unfortunately, there are lots of very old strings in glib, and also
lots of new strings in which people have kept up the old tradition,
perhaps entirely unaware that it used to not look stupid.
Fix this by just using 'dumb quotes' everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=700746
Higher order languages with garbage collection can have issues releasing
a binding, as they do not control the last reference being dropped on
the binding, source, or target instances.
https://bugzilla.gnome.org/show_bug.cgi?id=698018
There is some code in the wild (like in gnome-session) that does this
from its custom _constructor() implementation:
{
GObject *obj;
obj = ((chain up));
if (!object_is_viable (obj))
{
g_object_unref (obj);
return NULL;
}
else
return obj;
}
This has never been a valid use of GObject and this code has always
caused memory to be leaked[1] by growing the construction_objects list.
The ability to legitimately return NULL from a constructor was exactly
the reason that we created GInitable, in fact.
That doesn't change the fact that the g_object_new() rewrite will crash
in this case, so instead of doing that, let's emit a critical and avoid
the crash. This will allow people to upgrade their GLib without also
upgrading their gnome-session. Meanwhile, people can fix their broken
code.
[1] not in the strictest sense of the word, because it's still reachable
Make a number of improvements to g_object_new():
- instead of looking up the GParamSpec for the named property once in
g_object_new() (in order to collect) and then again in g_object_newv
(when actually setting the property), g_object_new_internal() is a
new function that takes the GParamSpec on the interface to avoid the
second lookup
- in the case that ->constructor() is not set, we need not waste time
creating an array of GObjectConstructParam to pass in. Just directly
iterate the list of parameters, calling set_property() on each.
- instead of playing with linked lists to keep track of the construct
properties, realise that the number of construct properties that we
will set is exactly equal to the length of the construct_properties
list on GObjectClass and the only thing that may change is where the
value comes from (in the case that it was passed in)
This assumption was already implicit in the existing code and can be
seen from the sizing of the array used to hold the construct
properties, but it wasn't taken advantage of to make things simpler.
- instead of allocating and filling a separate array of the
non-construct properties just re-iterate the passed-in list and set
all properties that were not marked G_PARAM_CONSTRUCT (since the ones
that were construct params were already used during construction)
- use the new g_param_spec_get_default_value() API instead of
allocating and setting the GValue for each construct property that
wasn't passed from the user
Because we are now iterating the linked list of properties in-order we
need to append to that list during class initialising instead of
prepending.
These changes show a very small improvement on the simple-construction
performance testcase (probably just noise) and they improve the
complex-construction case by ~30%.
Thanks to Alex Larsson for reviews and fixes.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
The way of getting the default value out of a GParamSpec is to allocate
a GValue, initialise it, then call g_param_spec_set_default() to set the
default value into that GValue.
This is exactly how we handle setting the default value for all of the
construct properties that were not explicitly passed to g_object_new().
Instead of doing the alloc/init/store on all construct properties on
every call to g_object_new(), we can cache those GValues in the private
data of the GParamSpec itself and reuse them.
This patch does not actually make that change to g_object_new() yet, but
it adds the API to GParamSpec so that a future patch to GObject can make
the change.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
Since instance private data is now always at a constant offset to the
instance pointer, we can add an accessor for it that doesn't also
require an instance.
The idea is that classes can call this from their class_init and store
it in a file-scoped static variable and use that to find their private
data on instances very quickly, without a priv pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=698056
This reverts commit ddb0ce1421.
Colin's smoke testing has found issues in at least gjs and
gnome-settings-daemon. We'll need to see if we can address those.
GObject has previously allowed installing properties after class_init
has finished running. This means that you could install some of your
own properties on G_TYPE_OBJECT, for example, although they wouldn't
have worked properly.
Prevent this from happening. Require that all properties are installed by
the time class_init has finished.
Complaints go to this bug:
https://bugzilla.gnome.org/show_bug.cgi?id=698614
Classically, a GTypeInstance has had the following layout:
[[[[GTypeInstance] GObject] TypeA] TypeB] [TypeAPrivate] [TypeBPrivate]
where TypeB is a subclass of TypeA which is a GObject. Both TypeA and
TypeB use pivate data.
The main problem with this approach is that the offset between a pointer
to an instance of TypeA and the TypeAPrivate is not constant: it changes
depending on the depth of derivation and the size of the instance
structures of the derived types. For example, changing the size of the
TypeB structure in the above example would push the TypeAPrivate further
along.
This complicates the implementation of g_type_instance_get_private().
In particular, during object construction when the class pointer to the
'complete type' of the object is not yet stored in the header of the
GTypeInstance, we need a lookup table in order to be able to implement
g_type_instance_get_private() accurately.
We can avoid this problem by storing the private data before the
structures, in reverse order, like so:
[TypeBPrivate] [TypeAPrivate] [[[[GTypeInstance] GObject] TypeA] TypeB]
Now the distance between TypeA and TypeAPrivate depends only on the size
of GObject and GTypeInstance, which are static. Even in the case of
TypeB, the distance is not statically known but can be determined at
runtime and is constant (because we will know the size of TypeAPrivate
by the time we initialise TypeB and it won't change).
This approach requires a slighty dirty trick: allocating extra memory
_before_ the pointer we return from g_type_create_instance(). The main
problem with this is that it will cause valgrind to behave very badly,
reporting almost everything as "possibly lost".
We can correct for this by including a few valgrind client requests in
order to inform it that the start of the GTypeInstance should be
considered a block of memory and that pointers to it should mean that
this block is reachable. In order to make the private data reachable,
we also declare it as a block and include an extra pointer from the end
of the primary block pointing back at it. All of this is only done if
we are running under Valgrind.
https://bugzilla.gnome.org/show_bug.cgi?id=698595
gtk# also has a problem with the new interface-after-init restriction
that nobody noticed until now. Add an exception for them as well so
that they have a cycle or so to sort things out.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
glibmm has a pretty difficult-to-solve problem caused by our recent
change to deny addition of interfaces to classes after initialisation.
They're looking for a long-term workaround for the problem, but in the
meantime we can allow the registration to succeed (with warning) if the
class looks like it's being defined by gtkmm.
https://bugzilla.gnome.org/show_bug.cgi?id=697229
Flags being used in the G_DEFINE_TYPE_EXTENDED sample was "0", so it
should expand to 0 as well, otherwise the compiler would bark with:
maman-bar.c: In function ‘maman_bar_get_type’:
maman-bar.c:36:53: error: ‘flags’ undeclared (first use in this function)
maman-bar.c:36:53: note: each undeclared identifier is reported only once for each function it appears in
https://bugzilla.gnome.org/show_bug.cgi?id=697250
Some (broken) toolchains for example trip up
-Werror=missing-prototypes in system headers. This patch allows
people to skip the formerly hardcoded "baseline" warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=694757
When looking up signals by name (to connect, for example) and the named
signal cannot be found on the given instance, report the type of the
instance.
This is quite a lot more useful as a diagnostic message than only a
memory address.
https://bugzilla.gnome.org/show_bug.cgi?id=694350
We need to keep a reference to the handler in the fast path, just like
in the slow path, otherwise if another thread disconnects the handler
we may destroy the closure while we're using it without the lock held.
We also move the freeing of the instance to after the emission is totally
done as the handler_unref_R (and the tracepoint) reference it.
https://bugzilla.gnome.org/show_bug.cgi?id=694253
handler_ref and handler_unref_R are always called with the signal
lock held. This is obvious for handler_unref_R as it even sometimes
drops this lock, and can be verified quickly for handler_ref by looking
at all call sites.
This improves the performace about 6% on the emit-handled and the
emit-handled-generic tests.
https://bugzilla.gnome.org/show_bug.cgi?id=694253
Experimentally disable the ability to unload dynamic types by refusing
to drop the last reference on types (effectively turning the type
unloading into dead code).
The plan is to leave things like this for a stable cycle and only
proceed with removing the code if we are sure that there are no
unforeseen problems.
https://bugzilla.gnome.org/show_bug.cgi?id=693351
The point of g_source_set_closure() is getting memory management right,
including handling closures disappearing from the outside (for example
because a runtime they refer to is being shutdown). This means that
sources with an associated closure should remove themselves from the
main loop and free memory when the closure is invalidated.
https://bugzilla.gnome.org/show_bug.cgi?id=692034
Before this commit, the only difference between the expected and actual
ABI were the addition of _init and _fini symbols in each module (now
that regexp-based export control is not catching those).
This is the bug that has been causing segfaults and criticals when accel
keys are used to close windows via GtkUIManager.
The main cause of this problem was a mistake made in the original patch
when modifying the handler_lookup() to take the extra 'closure'
parameter. The original check used was:
if (handler->sequential_number == handler_id ||
(closure && handler->closure == closure))
It was called to find a particular closure like so:
handler_lookup (instance, 0, closure, &signal_id);
The problem is that the check will return if either the signal ID or
closure matches (if a closure was given). The calling code assumes 0 to
be an invalid signal ID which will match no handlers, but unfortunately
the rest of gsignal code uses this to denote a signal that has already
been disconnected. The result is that this function was searching for a
matching closure _or_ the first already-disconnected handler. When it
found the already-disconnected handler, we'd get criticals and crashes.
The condition has been corrected; it now ignores the handler_id
parameter if the closure parameter is non-NULL.
While we're in here, change the lifecycle of the invalidation notify to
be easier to understand.
Before, the notify was removed when the last reference on the handler
dropped. This could happen in very many situations; often at the end of
an emission. Instead, we now tie the registration of the notifier to
the lifecycle of the signal connection. When the signal is disconnected
we remove the notification, even if other references are held (eg:
because it is currently being dispatched).
https://bugzilla.gnome.org/show_bug.cgi?id=690118
This reverts commit f2e00a07f4.
Moving the block up would prevent G_OS_WIN32 being checked correctly as
it is a macro that is defined by including the GLib header(s), at least for
Visual C++ builds.
https://bugzilla.gnome.org/show_bug.cgi?id=691769
We only want to control the default visibility for our five main
installable libraries: libglib, libgthread, libgmodule, libgobject,
libgio. We should therefore only set -fvisibility=hidden when building
those.
Use a separate substitution variable for this purpose.
Using CFLAGS directly leads to some modules built in testcases not
exporting their symbols (and then the tests fail). It also affects the
fam file monitoring module.
Colin had originally done it this way in his visibility patch series but
I failed to understand why so I didn't copy it. Now I do.
Also: revert changes made to two testcases in an attempt to work around
this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=691756
Commit 282366c326 unnecessarily (skip)ed all the GParamSpec constructors like
g_param_spec_bool(). Make those introspectable by dropping the (skip) and
adding proper transfer annotations.
Keep g_param_spec_value_array() skipped as GValueArray is deprecated.
With visibility now under the control of __declspec(dllexport) we no
longer need to build .def files or use them for building our various
.dll files.
.def files used to be installed (even though it is only really useful
when creating the .dll or .lib file). Don't do that anymore either.
The Makefiles still contain rules to create a .lib file for use with
Visual Studio and these rules require .def files. There are special
requirements to using these rules (like having installed and setup
Microsoft tools for use during the build) and therefore the problem of
creating a .def file for use with them is left open to anyone willing to
make the effort. Many options are available depending on which
toolchain is in use (dlltool, pexport, gendef, dumpbin.exe, just to name
a few).
If we can find a free tool for creating .lib files in the future, we
should probably revisit this issue and add proper support back to our
build system.
This macro simply evaluates the "extern" unless it has been explicitly
defined to something else.
All of the version macros (including the unversioned deprecation markers
and GLIB_AVAILABLE_IN_ALL) now include _GLIB_EXTERN as part of their
definition.
G_INLINE has also been modified to use _GLIB_EXTERN where appropriate.
This macro should never be used outside of the gmacros.h/gversonmacros.h
headers.
The effect of this patch is that "extern" has now been added to all
functions declared in installed headers. Strictly speaking, this is
something we should have had all along...
GLIB_VAR and GOBJECT_VAR have also been modified to use _GLIB_EXTERN on
non-Windows, instead of "extern" which they were using before. The
eventual goal is to use the normal version/deprecation macros on
exported variables and drop GLIB_VAR but we need to see how this will
work on Windows before we go ahead with that.
https://bugzilla.gnome.org/show_bug.cgi?id=688681
Add the GLIB_AVAILABLE_IN_ALL annotation to all old functions (that
haven't already been annotated with the GLIB_AVAILABLE_IN_* macros or a
deprecation macro).
If we discover in the future that we cannot use only one macro on
Windows, it will be an easy sed patch to fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=688681
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
GValueArray as a whole is deprecated in favor of GArray (with GValue
elements); warnings like "'g_value_array_get_nth' is deprecated: Use
'g_array_index' instead" are confusing because they suggest that the
GArray functions can be used with GValueArrays. Make them say "Use
'GArray' instead" instead.
https://bugzilla.gnome.org/show_bug.cgi?id=690970
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
When g_type_class_get_private is called without calling
g_type_add_class_private first, a g_warning is issued, but
the name of the function to call is wrong:
g_type_class_add_class_private.
https://bugzilla.gnome.org/show_bug.cgi?id=690348
In 2.34, g_compute_checksum_for_bytes() was added, but this patch
allows binding users to use the incremental update API; this is
significantly more efficient than reading entire files into memory.
https://bugzilla.gnome.org/show_bug.cgi?id=689982
This lets you cache type lookup information and then know when
the cache information is out of date. In particular, we want this
in order to be able to cache g_type_from_name() lookups in the Gtk+
theme machinery.
https://bugzilla.gnome.org/show_bug.cgi?id=689847
At least GDBus had code that had "_object" as a parameter to one of
its functions, but this clashes with the GObject macro
G_OBJECT_WARN_INVALID_PROPERTY_ID() which created a local "_object".
Since many of us cargo cult around copies of objects, let's be
defensive here and use local variable names less likely to clash with
application code.
https://bugzilla.gnome.org/show_bug.cgi?id=689377
The gobject tools (glib-genmarshal and gobject-query) were linking
against libgthread. Stop that.
Also, remove the gthread_INCLUDES internal automake substitution.
This reverts commit 028d4a03f2.
I thought that we would be able to get away with this incompatible
change but it appears to impact far too much existing code. The only
thing we can do is revert.
https://bugzilla.gnome.org/show_bug.cgi?id=688596
Add a check to prevent adding an interface to a class that has already
had its class_init done.
This is an incompatible change but it is suspected that there are not
many users of this functionality. Two known exceptions are pygobject
(fixed in bug 686149) and our own testsuite (affected tests have been
temporarily disabled by this patch).
Once we confirm that nobody else is using this functionality we can
remove a rather large amount of code for dealing with this case.
https://bugzilla.gnome.org/show_bug.cgi?id=687659
Basically due to a combination of va_args semantics around
signed/unsigned ints, this test case fails on ppc64. At the moment,
we have as yet to find any real-world consumer with such a large
enumeration value.
Unfortunately, the possible fixes for this are extremely invasive;
we would have to define a new enum API.
Given both of these facts, we believe it makes the most sense at the
current time to simply not test this. If we at a later time determine
there is such a real-world consumer, we can look at doing the
necessary fixes.
https://bugzilla.gnome.org/show_bug.cgi?id=686662
Very many testcases, some GLib tools (resource compiler, etc) and
GApplication were calling g_type_init().
Remove those uses, as they are no longer required.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
Move the guts of g_type_init() into a ctor and turn g_type_init() itself
into a do-nothing function.
g_type_init_with_debug_flags() now ignores its arguments, but it has
always been possible to achieve the same effect via environment
variables.
https://bugzilla.gnome.org/show_bug.cgi?id=686161
If the closure is invalidated we drop the ref on the signal handler
node, but if the signal is currently being dispatched, the ref could be
held elsewhere.
Flag that we no longer have an outstanding invalidation handler so that
we don't try to unregister ourselves when the other ref drops.
Add a testcase that catches this situation.
Move the constructed() call to happen after all of the properties are
set (not just the construct properties).
This is an incompatible change but we are making it under the belief
that it should be safe. If this change impacts you in a negative way
please comment on the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=685733
Modify gsignal to automatically disconnect a GClosure that becomes
invalid (in the g_closure_invalidate() sense).
Previously, when g_signal_connect_object() was used with a GObject as
the user_data and that object was destroyed, the handler would no longer
be called but the signal handler was itself was not disconnected (ie:
the bookkeeping data was kept around).
The main effect of this patch is that these signal handlers will now
be automatically disconnected (and fully freed).
The documentation for g_signal_connect_object() has anticipated this
change for over 10 years and has advised the following workaround when
disconnecting signal handlers connected with g_signal_connect_object():
if (g_signal_handler_is_connected (instance, id))
g_signal_handler_disconnect (instance, id);
If your code follows this practice then it will continue to work.
If your code never disconnects the signal handler then it was wasting
memory before (and this commit fixes that).
If your code unconditionally disconnects the signal handler then you
will start to see (harmless) g_critical() warnings about this and you
should fix them.
https://bugzilla.gnome.org/show_bug.cgi?id=118536
Because it now handles EINTR. And we should do so. While most people
use Linux, which tries very hard to avoid propagating EINTR back up
into userspace, it can still happen.
https://bugzilla.gnome.org/show_bug.cgi?id=682833
This avoids warnings when creating idiomatic value tables, like:
static const GTypeValueTable _clutter_shader_float_value_table = {
clutter_value_init_shader_float,
clutter_value_free_shader_float,
clutter_value_copy_shader_float,
clutter_value_peek_pointer,
"ip",
clutter_value_collect_shader_float,
"pp",
clutter_value_lcopy_shader_float
};
Because the strings are literals. And, really: nobody should be using
allocated values for the collection and lcopy strings.
https://bugzilla.gnome.org/show_bug.cgi?id=671545
The current note makes it look like the marshaller code generation has
been deprecated in favour of the libffi-based generic marshaller; this
is not the case, so we should probably clarify the point a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=677235
Otherwise we crash with a null-ptr deref in g_object_newv and ever there we
should not return null, as we're saying that object creation will not return
null.
Expand the documentation for g_object_[freeze|thaw]_notify() to explain that
it deduplicates “notify” signals emitted by frozen objects, so that at most
one signal is emitted per property.
https://bugzilla.gnome.org/show_bug.cgi?id=676937
I didn't do this comprehensively, since there's a lot of it, mainly
due to the GDBus object manager stuff, but anyone trying to use
that would fail fast due to lack of the gdbus code generator.
My main goal was to get API additions to existing classes like
g_data_input_stream_read_line_utf8(), as well as the lower level new
API like glib-unix.h.
https://bugzilla.gnome.org/show_bug.cgi?id=676816
Commit f084b60377 incorrectly set
DIST_SUBDIRS for the toplevel Makefile.am. In general actually we
don't need to set it, because modern automake automatically sets
it by looking at conditionals for SUBDIRS.
Tested-by: Rico Tzschichholz <ricotz@t-online.de>
https://bugzilla.gnome.org/show_bug.cgi?id=667806
This patch solves two problems:
First, it allows builders to optionally cut the circular dependency
between dbus and glib by disabling the modular tests (just like how
the tests can be disabled in dbus).
Second, the tests are entirely pointless to build if cross-compiling.
It also moves us slightly closer to the long term future we want where
the tests are a separate ./configure invocation and run against the
INSTALLED glib, not the one in the source tree. This would allow us to
run the tests constantly, not just when glib is built.
https://bugzilla.gnome.org/show_bug.cgi?id=667806
When building with MinGW/MSYS with srcdir != builddir the build fails:
- to locate the generated .def files
- creating libglib-gdb.py
- creating libgobject-gdb.py
Solved this by explicitly instructing these files to be generated
in $(builddir)/...
https://bugzilla.gnome.org/show_bug.cgi?id=653167
If the optimization is used for only having one closure handling a
signal emission, then hooks will not be run, so it should be disabled
when an emission hook is added.
https://bugzilla.gnome.org/show_bug.cgi?id=671918
The trace of the signal emission of the was calculating the instance
type after the instance was unrefed. Fix this by keeping the instance type around.
The ability to cross-compile glib got broken after the
merge of the 'signal-performance' branch as the assumption
was made that the generated glib-genmarshal can be executed
on the host (which isn't valid when cross-compiling).
Fixed this by using the just-built glib-genmarshal for normal
compilations and the native (host) glib-genmarshal when doing a
cross-compilation as was also done in several other areas of GLib
Tested for host=x86_64-unknown-linux-gnu, target=x86_64-unknown-linux-gnu
and host=x86_64-unknown-linux-gnu, target=i686-w64-mingw32
https://bugzilla.gnome.org/show_bug.cgi?id=671676
In the code generation portion, va_copy() is not universally available,
so use the existing G_VA_COPY macro that in turn calls va_copy() if it
is available or call an appropriate emulation otherwise.
va_vopy() is not universally available in all compilers, so make use of
the existing G_VA_COPY macro which either calls va_copy() if it is
available, or emulates it if otherwise.
When there is only one closure handling a signal emission and
it doesn't have a bunch of complicated features enabled we
can short circuit the va_args collection into GValues and call the
callback via the va_marshaller directly.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
If the signal argumment types matches a built in standard
marshaller we use the va_marshaller for that, and also the
normal marshaller if NULL was specified (as its faster than
the generic one).
This lets you set a va_marshaller on your signal which will be
propagated to all closures for the signal. Also, automatically
uses the generica va_marshaller if you specify a NULL c_marshaller.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
This means we're not abusing the notifiers for meta_marshallres,
and we're able to later cleanly add other fields to GClosure.
We still have to leave the ABI intact for the GClosure->meta_marshal
bit, as old G_CLOSURE_N_NOTIFIERS macro instances still accesses it.
However, we always set it to zero to keep those macros working.
https://bugzilla.gnome.org/show_bug.cgi?id=661140
Transforming a GValue holding flags from a GFlagsValue set that includes the 0
value (no flag bits set) into a string would loop until exhausting all the
available memory.
https://bugzilla.gnome.org/show_bug.cgi?id=670557
Add new macros to disable -Wdeprecated-declarations around a piece of
code, using the C99 (and GNU89) _Pragma() operator. Replace the
existing use of #pragma for this in gio, and suppress the warnings in
gvaluearray.c as well.
https://bugzilla.gnome.org/show_bug.cgi?id=669671
Given
typedef enum MyFoo MyFoo;
glib-mkenums would get confused, not notice the ";", and then keep
skipping lines until it found one that started with a "{", possibly
even going into the next file.
Fix it to just ignore those lines instead (and also, to error out if
it hits eof while parsing an enum).
https://bugzilla.gnome.org/show_bug.cgi?id=669595
The GValueArray type was added in a time, during the Jurassic era or so,
when GArray did not have a representable GType. The GValueArray API has
various issues as well:
- it doesn't match the other GLib array types;
- it is not reference counted;
- the structure is fully exposed on the stack, so it cannot be
extended to add reference counting;
- it cannot be forcibly resized.
The nice thing is that now we have a GArray type that can replace in
full GValueArray, so we can deprecate the latter, and reduce the
complexity in GLib, application code, and bindings.
https://bugzilla.gnome.org/show_bug.cgi?id=667228
... and g_value_get_gtype(). G_TYPE_GTYPE is a pointer type, so it's
values should use the v_pointer member. This is especially true, because
the value collectors from varargs in gvaluecollector.h use that, too.
This should only cause issues when sizeof(glong) != sizeof(gpointer),
and I'm not aware of any such platform. Maybe win64?
Transparent access to a weak pointer from the thread performing the
weak -> strong conversion is incompatible with thread-safety: that
thread will have to do something special. This is GNOME#548954.
https://bugzilla.gnome.org/show_bug.cgi?id=548954
Some of the GLib tests deliberately provoke warnings (or even fatal
errors) in a forked child. Normally, this is fine, but under valgrind
it's somewhat undesirable. We do want to follow fork(), so we can check
for leaks in child processes that exit gracefully; but we don't want to
be told about "leaks" in processes that are crashing, because there'd
be no point in cleaning those up anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=666116
We were previously preventing implementations of an interface from
specifying G_PARAM_CONSTRUCT for a property of that interface if the
interface didn't specify it itself (or was readonly).
This is something that should only interest the implementation, so we
remove this restriction.
This allows 6 new possible override scenarios:
- writable -> writable/construct
- writable -> readwrite/construct
- readwrite -> readwrite/construct
- writable/construct-only -> writable/construct
- writable/construct-only -> readwrite/construct
- readwrite/construct-only -> readwrite/construct
and we update the testcase to reflect this.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
Add a testcase to check all possibilities for overriding a property
specified on an interface from an implementation of that interface,
changing the type and flags.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
Change the order of the checks so that we hear about the 'biggest'
problem first. Also, stop reporting problems after we report the first
one for a particular property.
Add some comments.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
The property override typecheck was meant to enforce the type on the
overriding property being exactly equal to the type on the interface
property. Instead, g_type_is_a() was incorrectly used.
We could try to enforce equality, but if a property is read-only then it
should be possible for the implementation to type the property with any
subtype of the type specified on the interface (because returning a more
specific type will still satisfy the interface). Likewise, if the
property is write-only then it should be possible for the implementation
to type the property with any supertype.
We implement the check this way.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
Simplify some of the logic in this function.
1) Simplify flag checks as per Colin's suggestions in
https://bugzilla.gnome.org/show_bug.cgi?id=605667
2) Don't repeatedly recheck if class_pspec is NULL.
GObject enforces the following restrictions on property overrides:
- must only add abilities: if the parent class supports
readability/writability then the subclass must also support them.
Subclasses are free to add readability/writability.
- must not add additional restrictions: if the parent class doesn't
have construct/construct-only restrictions then the subclass must
not add them. Subclasses are free to remove restrictions.
The problem with the previous implementation is that the check against
adding construct/construct-only restrictions was being done even if the
property was not previously writable. As an example:
"readable" and "writable only on construct"
was considered as being more restrictive than
"read only".
This patch tweaks the check to allow the addition of
construct/construct-only restrictions for properties that were
previously read-only and are now being made writable.
https://bugzilla.gnome.org/show_bug.cgi?id=666615
First, some ARM systems are not fast enough to meet the 30 second
deadline in gwakeuptest.c, so increase that to 60.
Second, we have some signed/unsigned woes in the gparam transform tests.
These don't really matter, since it's test code, but they do obscure
real leaks in the library.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=666115
Acked-by: Matthias Clasen <mclasen@redhat.com>
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600161
* Represents an immutable reference counted block of memory.
* This is basically the internal glib GBuffer structure exposed,
renamed, and with some additional capabilities.
* The GBytes name comes from python3's immutable 'bytes' type
* GBytes can be safely used as keys in hash tables, and have
functions for doing so: g_bytes_hash, g_bytes_equal
* GByteArray is a mutable form of GBytes, and vice versa. There
are functions for converting from one to the other efficiently:
g_bytes_unref_to_array() and g_byte_array_free_to_bytes()
* Adds g_byte_array_new_take() to support above functions
https://bugzilla.gnome.org/show_bug.cgi?id=663291
When the 'conditional' parameter is TRUE, the queue will only be frozen
(ie: have its freeze count increase by one) if it is already frozen.
This will allow us to avoid a freeze-notify-thaw in the case that we
just want to notify on a single property.
Another approach may have been to add an is_frozen() type call and avoid
even increasing the freeze count at all in this case. Unfortunately,
I'm not totally sure what is the exact expected semantics of
simultaneous notifications in multiple threads and this may interact
badly with someone freezing or thawing in between our check and
emission.
Lift the check-if-READABLE and redirect-target logic from out of
g_object_notify_queue_add() into its own function, get_notify_pspec().
Use that function at the site of our two calls to
g_object_notify_queue_add().
This was done as a separate file before, and #include brought it into
gobject.c. That's a bit mad, so stop doing that.
Unfortunately, the insanity steps up a level: gobjectnotifyqueue.c is
installed in the public include dir, so we can't just get rid of it
entirely.
Similar to G_PARAM_DEPRECATED. It will warn only for users of the
signals, so a signal can still be emited without warning, for
compatibility reasons.
Apparently, there is no way user flags could have been used before,
so that shouldn't break anyone.
https://bugzilla.gnome.org/show_bug.cgi?id=663581
Instead of:
warning: ‘g_variant_get_gtype’ is deprecated (declared at ../../gobject/glib-types.h:242): Use '((GType) ((21) << (2)))' instead [-Wdeprecated-declarations]
show:
warning: ‘g_variant_get_gtype’ is deprecated (declared at ../../gobject/glib-types.h:242): Use ''G_VARIANT_GET_TYPE'' instead [-Wdeprecated-declarations]
Also, document the macro-expansion problem in the
G_GNUC_DEPRECATED_FOR docs
Allow passing --identifier-prefix and --symbol-prefix to glib-mkenums,
with the same meanings as in g-ir-scanner, to allow fixing up the enum
name parsing globally rather than needing to add a /<* *>/ override to
each enum.
https://bugzilla.gnome.org/show_bug.cgi?id=661797
This was used as an optimisation for the macro hackery that used to live
in gthread.h. If a particular library or program knew that it could
rely on thread support being enabled, it would allow for static
evaluation of conditionals in some of those macros.
Since the macros are dead and thread support is now always-on, we can
get rid of this bit of legacy.
And remove the 'joinable' argument from g_thread_new() and
g_thread_new_full().
Change the wording in the docs. Clarify expectations for
(deprecated) g_thread_create().
enums are stored in v_long but need to be marshalled as signed
integers. On platforms where int is 32 bits, taking the
address of v_long resulted in the wrong 32 bits being marshalled.
So we need to stuff the enum's int-sized value to a temporary
int-sized variable and marshall that instead.
Second, on return, libffi actually returns a pointer to a value
that's sized according to platform conventions, not according to
what the caller requested. ie if ffi_type_sint was requested, the
value can still be a 64-bit sign-extended long on a 64-bit
architecture like PPC64, thus the caller cannot simply cast
the return value as a pointer to the desired type, but must cast
as a pointer to an integral type and then cast to the desired
type to remove any sign extension complications.
For more information on how to correctly handle libffi return
values, see the following bug, specifically comment 35:
https://bugzilla.redhat.com/show_bug.cgi?id=736489
"For 64-bit ABIs that extend integral returns types to 64-bits, libffi always
returns full 64-bit values that you can truncate in the calling code. It's
just the way it is has always been. Please don't change libffi. I'll document
this clearly for the next version (perhaps there is a mention of this, I
haven't looked yet).
The same is true for returning 8-bit values, for instance, on 32-bit systems.
All ABIs extend those results to the full 32-bits so you need to provide a
properly aligned buffer that's big enough to hold the result."
https://bugzilla.gnome.org/show_bug.cgi?id=659881
These were the last users of the dynamic allocation API.
Keep the uses in glib/tests/mutex.c since this is actually meant to test
the API (which has to continue working, even if it is deprecated).
https://bugzilla.gnome.org/show_bug.cgi?id=660739
It's impossible to check this if the library user is using
g_type_register_static, but in that case their compiler should hopefully
warn about the truncation. This fixes it for G_DEFINE_TYPE and friends,
at least.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=659916
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Colin Walters <walters@verbum.org>
All locks are now zero-initialised, so we can drop the G_*_INIT macros
for them.
Adjust various users around GLib accordingly and change the docs.
https://bugzilla.gnome.org/show_bug.cgi?id=659866
The documentation for G_TYPE_CHAR says:
"The type designated by G_TYPE_CHAR is unconditionally an 8-bit signed
integer."
However the return value for g_value_get_char() was just "char" which
in C has an unspecified signedness; on e.g. x86 it's signed (which
matches the GType), but on e.g. PowerPC or ARM, it's not.
We can't break the old API, so we need to suck it up and add new API.
Port most internal users, but keep some tests of the old API too.
https://bugzilla.gnome.org/show_bug.cgi?id=659870
G_THREADS_ENABLED still exists, but is always defined. It is still
possible to use libglib without threads, but gobject (and everything
above it) is now guaranteed to be using threads (as, in fact, it was
before, since it was accidentally impossible to compile with
--disable-threads).
https://bugzilla.gnome.org/show_bug.cgi?id=616754
Some links were broken due to typos, because functionality was removed
in GLib 2.0 or for various other reasons. Fix up as many of them as is
reasonable.
The implementation of GValue is not public or documented. When
allocated on the stack, initializing a GValue is usually done as
documented with:
GValue value = { 0, };
There is lot code around (including WebKit) that added all the missing
fields, resulting in this ugly and non-obvious:
GValue value = { 0, { { 0 } } };
However, this doesn't play nice with -Wmissing-field-initializers for
example. Thus, G_VALUE_INIT.
http://bugzilla.gnome.org/show_bug.cgi?id=654793http://bugzilla.gnome.org/show_bug.cgi?id=577231
In an attempt to avoid some potential future abuses of the GParamSpec
API, qualify the 'name' field of the structure as 'const' and add a
comment noting that it is an interned string.
This is a theoretical API break, but it will only ever result in
warnings -- and even then, only if you were already doing something
questionable.
Clean up some of the warnings that were caused internally in gparam.c
from these changes.
This function implements the following logic:
if (g_variant_is_floating (value))
g_variant_ref_sink (value);
which is used for consuming the return value of callbacks that may or
may not return floating references.
This patch also replaces a few instances of the above code with the new
function (GSettings, GDBus) and lifts a long-standing restriction on the
use of floating values as the return value for signal handlers by
improving g_value_take_variant().
https://bugzilla.gnome.org/show_bug.cgi?id=627974
The -e parameter to echo isn't recognized by echo in POSIX sh,
but isn't needed when no escaped characters need to be
interpreted.
This fixes building glib with a mingw cross compiler on Mac OS X.
https://bugzilla.gnome.org/show_bug.cgi?id=654085
To help cross compilation, don't use glib-genmarshal in our
build. This is easy now that we have g_cclosure_marshal_generic().
In gobject/, add gmarshal.[ch] to git (making the existing entry
points stubs).
In gio/, simply switch to using g_cclosure_marshal_generic().
https://bugzilla.gnome.org/show_bug.cgi?id=652168
Rather than having the gtk-doc build machinery have a list of header
files to exclude, change the GLib build to dump a list of public
header files generated from the maintained Makefile.am files for
each of glib/, gobject/, gio/.
Also, for glib, always install glib-unix.h, even on non-Unix
platforms, for the same reason we install gwin32.h even on Unix.
https://bugzilla.gnome.org/show_bug.cgi?id=651745
The check for _MSC_VER here is not necessary here because:
-One cannot compile GLib out-of-the-box with VS 2003 (let alone VS6
or earlier) since GLib 2.22.4 or so.
-This code compiles fine with the currently-supported VS versions
(2008/2010) without the error mentioned in the comments.
This will close Bug 652002.
Based on a patch by Giovanni Campagna <gcampagna@src.gnome.org>
From discussion, GVariantIter is not useful for bindings, but
GVariantBuilder may be.
https://bugzilla.gnome.org/show_bug.cgi?id=646635
- remove all inline assembly versions
- implement the atomic operations using either GCC intrinsics, the
Windows interlocked API or a mutex-based fallback
- drop gatomic-gcc.c since these are now defined in the header file.
Adjust Makefile.am accordingly.
- expand the set of operations: support 'get', 'set', 'compare and
exchange', 'add', 'or', and 'xor' for both integers and pointers
- deprecate g_atomic_int_exchange_and_add since g_atomic_int_add (as
with all the new arithmetic operations) now returns the prior value
- unify the use of macros: all functions are now wrapped in macros that
perform the proper casts and checks
- remove G_GNUC_MAY_ALIAS use; it was never required for the integer
operations (since casting between pointers that only vary in
signedness of the target is explicitly permitted) and we avoid the
need for the pointer operations by using simple 'void *' instead of
'gpointer *' (which caused the 'type-punned pointer' warning)
- provide function implementations of g_atomic_int_inc and
g_atomic_int_dec_and_test: these were strictly macros before
- improve the documentation to make it very clear exactly which types
of pointers these operations may be used with
- remove a few uses of the now-deprecated g_atomic_int_exchange_and_add
- drop initialisation of gatomic from gthread (by using a GStaticMutex
instead of a GMutex)
- update glib.symbols and documentation sections files
Closes#650823 and #650935
The grouping in files/headers is not used anymore, and
the function attributes neither. Adapt abicheck scripts
and .def file generation rules accordingly.
The hash table used exclusively for looking up types by name used to map
quarks => types. But we can easily make it map strings => types, which
avoids the quark lookup. And that in trun avoids taking a lock and
consulting another hash table. So this change should make
g_type_from_name() roughly twice as fast.
In some cases, signal arguments have to be collected, even if there are i
no signal handlers connected (e.g. for GVariant parameters, where collection
consumes a floating variant).
Based on a patch by Christian Persch.
Bug #643624.
