Transparent access to a weak pointer from the thread performing the
weak -> strong conversion is incompatible with thread-safety: that
thread will have to do something special. This is GNOME#548954.
https://bugzilla.gnome.org/show_bug.cgi?id=548954
We were previously preventing implementations of an interface from
specifying G_PARAM_CONSTRUCT for a property of that interface if the
interface didn't specify it itself (or was readonly).
This is something that should only interest the implementation, so we
remove this restriction.
This allows 6 new possible override scenarios:
- writable -> writable/construct
- writable -> readwrite/construct
- readwrite -> readwrite/construct
- writable/construct-only -> writable/construct
- writable/construct-only -> readwrite/construct
- readwrite/construct-only -> readwrite/construct
and we update the testcase to reflect this.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
Change the order of the checks so that we hear about the 'biggest'
problem first. Also, stop reporting problems after we report the first
one for a particular property.
Add some comments.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
The property override typecheck was meant to enforce the type on the
overriding property being exactly equal to the type on the interface
property. Instead, g_type_is_a() was incorrectly used.
We could try to enforce equality, but if a property is read-only then it
should be possible for the implementation to type the property with any
subtype of the type specified on the interface (because returning a more
specific type will still satisfy the interface). Likewise, if the
property is write-only then it should be possible for the implementation
to type the property with any supertype.
We implement the check this way.
https://bugzilla.gnome.org/show_bug.cgi?id=666616
Simplify some of the logic in this function.
1) Simplify flag checks as per Colin's suggestions in
https://bugzilla.gnome.org/show_bug.cgi?id=605667
2) Don't repeatedly recheck if class_pspec is NULL.
GObject enforces the following restrictions on property overrides:
- must only add abilities: if the parent class supports
readability/writability then the subclass must also support them.
Subclasses are free to add readability/writability.
- must not add additional restrictions: if the parent class doesn't
have construct/construct-only restrictions then the subclass must
not add them. Subclasses are free to remove restrictions.
The problem with the previous implementation is that the check against
adding construct/construct-only restrictions was being done even if the
property was not previously writable. As an example:
"readable" and "writable only on construct"
was considered as being more restrictive than
"read only".
This patch tweaks the check to allow the addition of
construct/construct-only restrictions for properties that were
previously read-only and are now being made writable.
https://bugzilla.gnome.org/show_bug.cgi?id=666615
Either g_type_register_static_simple (used by G_DEFINE_TYPE_EXTENDED)
and G_IMPLEMENT_INTERFACE use automatic variables for GTypeInfo and
GInterfaceInfo structs, while tutorials and source code often use
static variables. This commit consistently adopts the former method.
https://bugzilla.gnome.org/show_bug.cgi?id=600161
When the 'conditional' parameter is TRUE, the queue will only be frozen
(ie: have its freeze count increase by one) if it is already frozen.
This will allow us to avoid a freeze-notify-thaw in the case that we
just want to notify on a single property.
Another approach may have been to add an is_frozen() type call and avoid
even increasing the freeze count at all in this case. Unfortunately,
I'm not totally sure what is the exact expected semantics of
simultaneous notifications in multiple threads and this may interact
badly with someone freezing or thawing in between our check and
emission.
Lift the check-if-READABLE and redirect-target logic from out of
g_object_notify_queue_add() into its own function, get_notify_pspec().
Use that function at the site of our two calls to
g_object_notify_queue_add().
This was done as a separate file before, and #include brought it into
gobject.c. That's a bit mad, so stop doing that.
Unfortunately, the insanity steps up a level: gobjectnotifyqueue.c is
installed in the public include dir, so we can't just get rid of it
entirely.
Similar to G_PARAM_DEPRECATED. It will warn only for users of the
signals, so a signal can still be emited without warning, for
compatibility reasons.
Apparently, there is no way user flags could have been used before,
so that shouldn't break anyone.
https://bugzilla.gnome.org/show_bug.cgi?id=663581
Some links were broken due to typos, because functionality was removed
in GLib 2.0 or for various other reasons. Fix up as many of them as is
reasonable.
- remove all inline assembly versions
- implement the atomic operations using either GCC intrinsics, the
Windows interlocked API or a mutex-based fallback
- drop gatomic-gcc.c since these are now defined in the header file.
Adjust Makefile.am accordingly.
- expand the set of operations: support 'get', 'set', 'compare and
exchange', 'add', 'or', and 'xor' for both integers and pointers
- deprecate g_atomic_int_exchange_and_add since g_atomic_int_add (as
with all the new arithmetic operations) now returns the prior value
- unify the use of macros: all functions are now wrapped in macros that
perform the proper casts and checks
- remove G_GNUC_MAY_ALIAS use; it was never required for the integer
operations (since casting between pointers that only vary in
signedness of the target is explicitly permitted) and we avoid the
need for the pointer operations by using simple 'void *' instead of
'gpointer *' (which caused the 'type-punned pointer' warning)
- provide function implementations of g_atomic_int_inc and
g_atomic_int_dec_and_test: these were strictly macros before
- improve the documentation to make it very clear exactly which types
of pointers these operations may be used with
- remove a few uses of the now-deprecated g_atomic_int_exchange_and_add
- drop initialisation of gatomic from gthread (by using a GStaticMutex
instead of a GMutex)
- update glib.symbols and documentation sections files
Closes#650823 and #650935
I couldn't tell from reading the documentation whether I had to pass in
an uninitialized value, or a value initialized to the exact type, or
something else. It turns out (from reading the source) that you have to
pass in an initialized value, but you can use any type to which the
property's actual type can be transformed.
So, let's document this.
The code section guarded with toggle_refs_mutex includes a call to
g_object_unref(), which may call toggle_refs_notify(). As the latter
tries to acquire the same mutex, glib locks up.
https://bugzilla.gnome.org/show_bug.cgi?id=632884
Since we added g_object_notify_by_pspec(), an efficient way to install
and notify properties relies on storing the GParamSpec pointers inside
a static arrays, like we do for signal identifiers.
Instead of multiple calls to g_object_class_install_property(), we
should have a single function to take the static array of GParamSpecs
and iterate it.
https://bugzilla.gnome.org/show_bug.cgi?id=626919
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This should fix bug #628952.
Don't include glib/gdatasetprivate.h directly. Especially don't define
GLIB_COMPILATION when doing that, as that causes breakage on Windows
because of the variable dllimport/dllexport stuff in gtypes.h that
checks GLIB_COMPILATION. That macro really should be defined only when
compiling code that goes into the libglib DLL. Otherwise the compiler
thinks that variables that should be imported from libglib are
actually defined in the code being compiled.
Just call g_atomic_pointer_get() as such, don't bother with
G_DATALIST_GET_FLAGS.
Signed-off-by: Tor Lillqvist <tml@iki.fi>
The gdatasetprivate.h header includes gatomic.h directly. It all works
well in GLib, but inside GObject it will trigger the single inclusion
guard.
Since this is a private header, and it's kind of a special case, one way
to fix it is to declare GLIB_COMPILATION around it and fool the single
inclusion guard in gatomic.h into thinking we're compiling GLib and not
GObject.
g_object_notify_by_pspec() will emit the "notify" signal on the given
pspec, short-circuiting the hash table lookup needed by
g_object_notify(). The suggested and documented way of using
g_object_notify_by_pspec() is similar to the way of emitting signals
with their ID.
Emission tests (with no handler attached to the notify signal) show a
10-15% speedup over using g_object_notify().
https://bugzilla.gnome.org/show_bug.cgi?id=615425
This adds static markers and systemtap tapsets for:
* type creation
* object lifetimes (creation, ref, unref, dispose, finalize)
* signal creation and emission
Signal emissions and finalization marker have a corresponding
*_end (or *-end in dtrace) version that is when the corresponding
operation is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=606044
The reason we need to enforce this is that the GTypeValueTable
documentation explicitly states that memory is memset to 0 when the
value_init function is called.
https://bugzilla.gnome.org/show_bug.cgi?id=603590
This works around the need to take a custom mutex twice and add the
object to a GSList of objects that are currently in construction for the
common case. Only when the constructor is overwritten do we use the
previous behavior and allow things like singleton objects.
The only slightly incompatible change is that previously, it was ok to
call g_object_set() on construct-only properties while the object was
initialized. This will now fail. If that behavior is needed, setting a
custom constructor that just chains up will reenable this functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=557151
Store whether the object has a toggleref before decrementing the
refcount to prevent race condition when two threads simultaneously
try to unref an object with a refcount of 2.
Patch by Antoine Tremblay.
https://bugzilla.gnome.org/show_bug.cgi?id=551706
This avoids a bunch of code and makes construction of simple objects
faster.
Object construction performance improvement:
Non-Threaded Threaded
Simple: 14% 5%
Complex: -1.1% -2.2%
Other tests stable.
https://bugzilla.gnome.org/show_bug.cgi?id=557100
If the class has no properties there could be no notification anyway.
This is an important optimization for construction of simple objects.
Object construction performance improvement:
Non-Threaded Threaded
Simple: 84% 91%
Complex: -1.4% -0.6%
Other tests stable.
https://bugzilla.gnome.org/show_bug.cgi?id=557100
GLib users buildable with gcc 4.4. Patch by Jakub Jelinek.
* glib/gatomic.[hc]: Add G_GNUC_MAY_ALIAS to pointer arguments,
fix macro versions to only operate on objects of the same size.
* glib/gdataset.c:
* glib/gthread.[hc]:
* glib/gdatasetprivate.h: Remove unnecessary casts in
g_atomic_pointer_get calls.
svn path=/trunk/; revision=7875
2009-01-02 Behdad Esfahbod <behdad@gnome.org>
Bug 565136 – Gobject's "notify" signal parameters are wrong in gtk-doc
Patch from Andrzej Zaborowski
* gobject.c (g_object_do_class_init): Fix param order in docs.
svn path=/trunk/; revision=7759
2008-06-29 Björn Lindqvist <bjourne@gmail.com>
Bug 539626 – Update docstrings for g_object_freeze_notify and
g_object_thaw_notify
* gobject/gobject.c: Explain how the freeze count works.
svn path=/trunk/; revision=7102
2008-06-22 Michael Natterer <mitch@imendio.com>
* *.c: remove trailing whitespace from newly added gtk-doc
comments and reformatted some where they contained overly long or
ill-formatted lines.
svn path=/trunk/; revision=7090
2008-06-22 Michael Natterer <mitch@imendio.com>
* *.c: moved includes back to the top of the files (before gtk-doc
SECTION comments). Add "config.h" in all files and move system
included before glib includes. Remove trailing whitespace from
SECTION comments and did some reformatting where lines were overly
long, no documentation content was changed.
svn path=/trunk/; revision=7089
Tue Apr 3 12:34:14 2007 Tim Janik <timj@gtk.org>
* gobject.[hc]: invoke GObjectClass.constructed() only for newly
constructed objects, and invoke it while the notify queue is
still being frozen, after all CONSTRUCT* properties have been
set and before random other properties are being set.
* applied modified patch from Ryan Lortie to implement
GObjectClass.constructed() to fix#425324.
2007-04-02 Ryan Lortie <desrt@desrt.ca>
* gobject/gobject.h: Add 'constructed' vcall to GObjectClass.
* gobject/gobject.c (g_object_newv): call ->constructed() as last
step of object construction.
svn path=/trunk/; revision=5441
Tue Aug 29 13:27:33 2006 Tim Janik <timj@gtk.org>
* glib-mkenums.in: fixed to print usage and version info on STDOUT
(#322502).
* gobject.c (g_initially_unowned_init): restore ; after G_DEFINE_TYPE.
Wed Aug 23 10:35:32 2006 Tim Janik <timj@gtk.org>
* gobject.[hc]: changed return value of g_value_dup_object(), fixes#343292.
2006-08-23 Sven Neumann <sven@gimp.org>
* gobject/glib-genmarshal.[c1]: added new command-line option
"--internal" that can be used to let glib-genmarshal generate
internal functions using the G_GNUC_INTERNAL attribute (bug #346647).
Wed Aug 16 13:55:08 2006 Tim Janik <timj@imendio.com>
* gobject.c: conditionally thaw the notify queue after construction,
so we don't trigger warnings when trying to thaw an unfrozen singleton.
Tue Mar 7 17:09:07 2006 Tim Janik <timj@gtk.org>
* gobject.c (g_object_compat_control): added case3 to hand out the
original floating flag handler. required by gtk+ >= 2.10.
Thu Dec 22 14:59:24 2005 Tim Janik <timj@imendio.com>
* gvaluetypes.[hc]: implemented G_TYPE_GTPYE. applied patch
from matthias which implements GType accessors for GValue.
* gparamspecs.[hc]: applied patch from matthias which
implements G_TYPE_PARAM_GTYPE.
* gobject.[hc]:
GUnowned: introduced a new object type that has an initially
floating reference.
g_object_compat_control(): allow setting of a floating flag handler.
Wed Nov 23 18:01:46 2005 Tim Janik <timj@imendio.com>
* gobject.[hc]: added floating reference count.
g_object_is_floating():
g_object_ref_sink(): new functions to deal with floating references.
g_object_force_floating(): new funciton for object implementations
to set the floating flag.
* gobject.c (g_object_init): make objects initially floating.
Wed Nov 23 17:58:13 2005 Tim Janik <timj@gtk.org>
* gparam.[hc]: added g_param_spec_ref_sink().
Mon Aug 1 23:00:42 2005 Tim Janik <timj@imendio.com>
* gclosure.c: turned all modifications to the first 32 integer bits in a
closure into atomic accesses. wrapped write accesses into special macros
to keep the atomic modification logic in a single place. comment cleanups.
* gclosure.h: made all atomicly accessed closure fields volatile.
* gobject.h: made ref_count field volatile.
Sun Jul 31 02:04:23 2005 Tim Janik <timj@gtk.org>
* gobject.c: use g_datalist_set_flags() and g_datalist_unset_flags() to
allow proper locking around &qdata modifications.
Sat Jul 30 21:10:26 2005 Tim Janik <timj@gtk.org>
* gobject.c: reverted notify_mutex introduction, since this prevents
parallelized setting of object properties on different objects, and
serves no apparent purpose (to me at least).
g_object_real_dispose(): removed non-atomic reference count
modifications.
g_object_unref(): make sure the closures array is destroyed when
destroying signal handlers.
* gparam.c: cosmetic changes.
* gsignal.c: comment fixup. allow 16bit blocking count.
* gsignal.c: reverted GClosure related changes.
* gclosure.c: reverted premature commit of atomic reference
counting attempt.
2005-07-15 Matthias Clasen <mclasen@redhat.com>
Make refcounting threadsafe by using atomic
operations. (#166020, Wim Taymans)
* gobject.c: Use a recursive lock to protect the
notify queue.
(g_object_unref): Get rid of g_object_last_unref and
do the last unref handling in g_object_unref.
(g_object_ref, g_object_unref): Use atomic operations.
* gsignal.c (struct _HandlerMatch): Use a full integer
for the ref_count field.
(handler_ref, handler_unref_R): Use atomic operations.
* gparam.c (g_param_spec_ref, g_param_spec_unref):
Use atomic operations instead of a lock to make the
refcounting threadsafe.
* gclosure.c (g_closure_ref, g_closure_unref): Use atomic
operations. This is more complicated here, since the
refcount is stored in a bitfield, so we also have
to access all other bitfield members atomically.
* gsignal.c (handlers_find): Read the meta_marshal flag
of the closure atomically.
* tests/Makefile.am (SUBDIRS): Add tests/refcount
* configure.in: Add tests/refcount
* tests/refcount/properties.c: Test property changes
from multiple threads.
* tests/refcount/signals.c: Test signal emission from
multiple threads.
* tests/refcount/objects.c: Test refcounting from
multiple threads.
* tests/refcount/objects2.c:
* tests/refcount/properties2.c: Tests to measure the
overhead of threadsafe refcounting.
* glib/giochannel.c (g_io_channel_ref, g_io_channel_unref):
Use atomic operations to make refcounting
threadsafe. (#166020, Wim Taymans)
2005-05-05 Owen Taylor <otaylor@redhat.com>
* gobject.[ch] gobject.symbols: Add
g_object_add/remove_toggle_ref() functions to get notification
when a reference count is the last remaining reference; this
enables better memory management for language bindings.
(http://mail.gnome.org/archives/gtk-devel-list/2005-April/msg00095.html)
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/gdataset.[ch] glib/gdatasetprivate.h: Add
g_datalist_set/unset_flags(), g_datalist_get_flags() functions
to squeeze some bits into a GDataSet... this is needed for
efficient implementation of toggle references in GObject.
* tests/gobject/references.c tests/gobject/Makefile.am:
Add a test case for weak and toggle references.
* glib/gfileutils.[ch]: Rename g_file_replace() back
to g_file_set_contents().
* glib/glib.symbols: Update.
2005-05-05 Owen Taylor <otaylor@redhat.com>
* glib/Makefile.am glib/glib-sections.txt gobject/gobject-sections.txt:
Update
* gobject/tmpl/objects.sgml: Document toggle-references.
2005-03-14 Matthias Clasen <mclasen@redhat.com>
* abicheck.sh: Make work again.
* gsourceclosure.c: Fix a typo.
Make PLT-reduction work with gcc4, and don't include
everything in gobjectalias.h:
* gobject.symbols: Group symbols by header and source
file.
* makegobjectalias.pl: Protect definitions by the same
preprocessor symbols used to guard the headers. Move
the alias declarations to a separate file which is
produced when calling makegalias.pl -def
* Makefile.am (gobjectaliasdef.c): Add a rule to
build this file.
* *.c: Include gobjectalias.h after the other i
GLib headers, include gobjectaliasdef.c at the bottom.
2004-09-16 Matthias Clasen <mclasen@redhat.com>
Implement the same PLT reduction technique used in GTK+:
* Makefile.am: Generate gobjectalias.h from gobject.symbols.
(BUILT_SOURCES): Add gobjectalias.h.
* makegobjectalias.pl: Script to generate gobjectalias.h.
* *.c: Include gobjectalias.h
Sat Nov 29 14:57:20 2003 Tim Janik <timj@gtk.org>
* gobject.c: fix g_object_set() whithin _init() implementations
not working for construct-only properties.
(g_object_init): make the object enter a construct_objects list.
(g_object_newv): remove object from construct_objects after creation.
(g_object_set_valist):
(g_object_set_property): allow construct-only properties for
objects which are in construct_objects.
Thu Nov 27 17:53:52 2003 Tim Janik <timj@gtk.org>
* gtype.[hc]:
(g_type_class_peek_static): variant of class_peek() which works for
static types only.
* gobject.c:
(g_object_do_class_init): make ::notify a run-action signal.
(g_object_newv): use g_type_class_peek_static() by default to
speed up common code path (trades two write-locks for one read-lock).
(g_object_disconnect):
(g_object_connect): allow signal specification words to be
seperated by '-'.
(g_object_set_valist):
(g_object_new_valist): don't leak values.
(g_object_get_property): check property for readability.
(g_object_set_property): check property for writability and to
not be construct-only.
(g_object_set_valist): check property to not be construct-only.
Tue Oct 14 17:40:19 2003 Owen Taylor <otaylor@redhat.com>
* gparamspecs.[ch]: Add a new GParamSpecOverride type
that is a pointer to a different paramspec in a parent
class or interface.
* gparam.[ch]: Add g_paramspec_get_redirect_target()
which follows GParamSpecOverride to the real property.
Make g_param_spec_pool_list() hand redirections,
properties on interfaces.
* gobject.[ch] gobjectnotifyqueue.c: Add
g_object_interface_install_property,
g_object_interface_find_property,
g_object_interface_list_properties(). Redirect virtually all
publically exposed GParamSpec's to the redirect target if
any. (->constructor is the exception.)
(#105894)
2003-09-12 Matthias Clasen <maclas@gmx.de>
Make the g_value_set_x_take_ownership() functions "official"
part of the API (#100948):
* gvaluetypes.[hc]: Add g_value_take_string() (synonym to the
now deprecated g_value_set_string_take_ownership()).
* gparam.[hc]: Add g_value_take_param() (synonym to the
now deprecated g_value_set_param_take_ownership()).
* gobject.[hc]: Add g_value_take_object() (synonym to the
now deprecated g_value_set_object_take_ownership()).
* gboxed.[hc]: Add g_value_take_boxed() (synonym to the
now deprecated g_value_set_boxed_take_ownership()).
* gobject/gobject-sections.txt: Add new g_value_take_x() functions.
* gobject/tmpl/param_value_types.sgml: Document new g_value_take_x()
functions. (#100948)
Fri May 30 14:42:24 2003 Owen Taylor <otaylor@redhat.com>
* gobject.c (g_value_set_object): Order refs/unrefs
so setting the same object back is safe. (#112861,
Morten Welinder)
Mon May 6 16:06:23 2002 Owen Taylor <otaylor@redhat.com>
[ merged from stable ]
* gobject.c: Remove PROPERTIES_CHANGED enumeration
value that wasn't used any more. (#78833,
Matthias Clasen)
* gboxed.c (g_boxed_copy): Remove check on data[2]
that no longer exists. (#80814, Daniel Elstner)
Sun Mar 3 04:11:58 2002 Tim Janik <timj@gtk.org>
* gobject.c: placed a comment about not changing CArray until we have
g_object_list_watched_closures().
* gparam.h (struct _GParamSpecClass): added padding.
* gobjectnotifyqueue.c (struct _GObjectNotifyQueue): abuse
g_list_alloc() to allocate GObjectNotifyQueue to et rid
of locking issues.
Wed Feb 20 22:55:15 2002 Owen Taylor <otaylor@redhat.com>
* gobject.c: Fix implicit conversions between void * and
function pointer (Miroslaw Dobrzanski-Neumann, #71963)
Sun Feb 16 22:08:48 2002 Tim Janik <timj@gtk.org>
* gobject.[hc]:
* gparam.[hc]: provide marshaller specific value_set_*_take_ownership()
variants.
* gvalue.h: shrink GValue's data contents to 2 unions.
* glib-genmarshal.c: fix release and realeas_check hackage by always
using _take_ownership() variants. directly access value contents if
G_ENABLE_DEBUG is not defined.
* gobject.h: add padding pointers to the class struct.
Mon Sep 10 20:31:37 2001 Tim Janik <timj@gtk.org>
* gobject.[hc]: removed extraneous GObject* returns from a
couple functions that are very unlikely to be used in nested.
changed gpointer->GObject* for a couple return values/arguments.
this fixes#50206.
2001-08-17 James Henstridge <james@daa.com.au>
* gobject.c (WeakRefStack): add an object member to the structure.
(weak_refs_notify): pass wstack->object as extra argument to
notify functions.
(g_object_weak_ref): set wstack->object when initialising
WeakRefStack.
* gobject.h (GWeakNotify): add second argument to prototype which
gives the pointer to where the object that is being disposed of
was.
2001-08-06 Sven Neumann <sven@gimp.org>
* glib/gutils.[ch]: added new function g_nullify_pointer().
* gobject/gobject.[ch]:
added new functions g_object_[add|remove]_weak_pointer().
Mon Jul 2 07:17:47 2001 Tim Janik <timj@gtk.org>
* gobject.c (g_object_weak_ref):
(g_object_watch_closure): congrats tim, introducing of-by-one
errors like on my very first day of C programming.
Sat Jun 30 23:14:32 2001 Tim Janik <timj@gtk.org>
* glib/glist.[hc]: added g_list_insert_before().
* glib/gslist.c (g_slist_insert_before): provide an implementation,
prototype was already present...
Sat Jun 30 11:07:00 2001 Tim Janik <timj@gtk.org>
* gobject.[hc]: provide weak_ref/weak_unref functions,
invoked from ->dispose. renamed ->shutdown() to ->dispose(),
provide "public" API entry here: g_object_run_dispose(), this
fucntion should _only_ be called from object system implementations
(e.g. gtkobject.c) if at all.
* gtypemodule.c (g_type_module_dispose): s/shutdown/dispose/
* gsignal.h: removed compat aliases.
* gobject.c (g_object_connect): support data objects.
Thu Jun 28 16:57:44 2001 Tim Janik <timj@gtk.org>
* configure.in (GLIB_MICRO_VERSION): up version number to 1.3.7,
interface age 0, binary age 0.
Thu Jun 28 16:42:49 2001 Tim Janik <timj@gtk.org>
* gsignal.c (g_signal_lookup):
(g_signal_list_ids): give elaborate warnings about invalid types,
non-instantiatable types and unloaded types that we can't operate on.
* gparam.[hc]: g_param_spec_pool_belongings() ->
g_param_spec_pool_list_owned().
* gsignal.[hc]: renamed:
g_signal_newc -> g_signal_new
g_signal_disconnect_by_func -> g_signal_handlers_disconnect_by_func
g_signal_block_by_func -> g_signal_handlers_block_by_func
g_signal_unblock_by_func -> g_signal_handlers_unblock_by_func
added GConnectType to simplify (..gboolean swapped, gboolean after)
args.
* gobject.[hc]: changed prototypes accordingly.
Mon Jun 11 17:07:06 2001 Tim Janik <timj@gtk.org>
* gboxed.[hc]: remove left-over usages of an anonymous GBoxed typedef.
* gobjectnotifyqueue.c: moved property notify queue implementation
bits into this function.
* gparam.[hc]: added g_param_spec_pool_belongings(), completed
g_param_spec_pool_list(). added GParameter for _setv() functions.
* gobject.[hc]: use gobjectnotifyqueue.h implementation now.
got rid of properties_changed signal.
new functions g_object_newv(), g_object_class_list_properties().
removed "properties_changed" signal.
* gtype.[hc]: added g_type_depth() to figure number of parent
types + 1 for a type.
* gsignal.h: add g_signal_connect() (as per owen's request) and
g_signal_connect_swapped().
Tue May 22 02:46:13 2001 Tim Janik <timj@gtk.org>
* gobject.c (g_value_set_object): make g_value_set_object()
take a gpointer v_object so people don't need to G_OBJECT()
cast NULL pointers (C code convenience).
Thu May 3 06:10:23 2001 Owen Taylor <otaylor@redhat.com>
* gobject.c (g_object_set_[q]data_full): Make types of ternary
operator correspond. (Fixes compilation errors with Sun CC,
#52230)
2001-04-19 Havoc Pennington <hp@redhat.com>
* gobject.c (g_object_get_valist): We were returning junk memory
here, because we didn't copy the value (G_VALUE_NOCOPY_CONTENTS
passed to G_VALUE_LCOPY) and then we freed the GValue immediately
after. Removed G_VALUE_NOCOPY_CONTENTS from here; need a
G_VALUE_STEAL_CONTENTS or the like if we want this optimization.
Wed Mar 14 18:46:54 2001 Tim Janik <timj@gtk.org>
* gscanner.[hc]: removed archaic gpointer derived_data; relict and
added a GData member instead.
* glist.[hc]: added g_list_remove_all().
* gslist.[hc]: added g_slist_remove_all().
Sat Mar 17 23:18:36 2001 Tim Janik <timj@gtk.org>
* gobject.c (g_object_get_property): minor bug-fix.
* gbsearcharray.[hc]: provide a macro for static initialization and
functions g_bsearch_array_new() and g_bsearch_array_destroy() for
dynamic allocations.
* gboxed.c: introduce G_TYPE_GSTRING, boxed type for GString.
* gclosure.[hc]: naming corrections.
Fri Mar 9 16:42:08 2001 Tim Janik <timj@gtk.org>
* gvaluetypes.[hc]: moved g_strdup_value_contents() into this file as
a public function (was static in gobject.c before). it's a bit odd
to have that function here, especially since it requires extra includes,
but then it doesn't very well fit somewhere else either.
* gparamspecs.c: added default/max/min checks to param spec creation
functions.
Fri Mar 9 18:01:43 2001 Tim Janik <timj@gtk.org>
* gscanner.[hc]: made config arg to g_scanner_new() const.
Fri Mar 9 16:42:08 2001 Tim Janik <timj@gtk.org>
* gvaluetypes.[hc]: moved g_strdup_value_contents() into this file as
a public function (was static in gobject.c before). it's a bit odd
to have that function here, especially since it requires extra includes,
but then it doesn't very well fit somewhere else either.
* gparamspecs.c: added default/max/min checks to param spec creation
functions.
Thu Mar 8 16:23:34 2001 Tim Janik <timj@gtk.org>
* ghook.[hc]: destruction cleanup. there's one
->finalize_hook member in the hooklist now that gets
called when a hook should be destroyed, that's it.
that function is guarranteed to be called only when
all ref_counts to the hook vanished, thus also when
the hook is not in call.
Thu Mar 8 16:35:48 2001 Tim Janik <timj@gtk.org>
* gparamspecs.[hc]: s/g_param_spec_string_c/g_param_spec_stringc/.
* gsignal.[hc]: fixed accumulator invocation, implemented emission
hooks. and no, neither of these callbacks are called via a closure,
language bindings can wrap the accumulator and emission hook
interface, they already get parameters marshalled into a GValue array.
(g_signal_connect): removed this function as its C specific, doesn't
cover the swapped argument, is too close to its broken original
gtk_signal_connect() and creates demand for _swapped, _after and
_swapped_after variants <brrr>.
(g_signal_connectc): convenience macro to connect a C handler
func with data, like the old g_signal_connect() plus swapped
argument.
* gtype.h:
* gboxed.c: added G_TYPE_VALUE boxed type.
Wed Mar 7 09:36:33 2001 Tim Janik <timj@gtk.org>
* gboxed.[hc]: changed prototype of g_boxed_type_register_static()
to contain an optional init function and a hint at whether the
boxed structure uses ref counting internally.
added g_value_set_boxed_take_ownership().
made G_TYPE_BOXED an abstract value type.
* genums.[hc]: made G_TYPE_ENUM and G_TYPE_FLAGS abstract value
types.
* glib-genmarshal.c: argument type changes, preparation for third-party
arg specification.
* gobject.[hc]: cleaned up get/set property code.
added g_strdup_value_contents() to improve warnings.
* gparam.[hc]: added g_param_value_convert(), taking over responsibility
of the old g_value_convert(). added G_PARAM_LAX_VALIDATION flag so
validation alterations may be valid a part of the property setting
process.
* gparamspecs.[hc]: made value comparisons stable (for sort applications).
added GParamSpecValueArray, a param spec for value arrays and
GParamSpecClosure. nuked the value exchange functions and
GParamSpecCCallback.
* gtype.[hc]: catch unintialized usages of the type system with
g_return_val_if_uninitialized(). introduced G_TYPE_FLAG_VALUE_ABSTRACT
to flag types that introduce a value table, but can't be used for
g_value_init(). cleaned up reserved type ids.
* gvalue.[hc]: code cleanups and saner checking.
nuked the value exchange API. implemented value transformations, we
can't really "convert" values, rather transforms are an anylogy to
C casts, real conversions need a param spec for validation, which is
why g_param_value_convert() does real conversions now.
* gvaluearray.[hc]: new files that implement a GValueArray, a struct
that can hold inhomogeneous arrays of value (to that extend that it
also allowes undefined values, i.e. G_VALUE_TYPE(value)==0).
this is exposed to the type system as a boxed type.
* gvaluetransform.c: new file implementing most of the former value
exchange functions as single-sided transformations.
* gvaluetypes.[hc]: nuked G_TYPE_CCALLBACK, added
g_value_set_string_take_ownership().
* *.h: s/G_IS_VALUE_/G_VALUE_HOLDS_/.
* *.[hc]: many fixes and cleanups.
* many warning improvements.
Tue Feb 27 18:35:15 2001 Tim Janik <timj@gtk.org>
* gobject.c (g_object_get_valist): urg, pass G_VALUE_NOCOPY_CONTENTS
into G_VALUE_LCOPY(), this needs proper documenting.
* gparam.c: fixed G_PARAM_USER_MASK.
* gtype.c (type_data_make_W):
(type_data_last_unref_Wm): fixed invalid memory freeing.
* gobject.c (g_object_last_unref): destroy signal handlers associated
with object, right before finalization.
* gsignal.c (g_signal_parse_name): catch destroyed nodes or signals
that don't actually support details.
* gobject.[hc]: got rid of property trailers. nuked GObject
properties "data" and the "signal" variants.
(g_object_connect): new convenience function to do multiple
signal connections at once.
(g_object_disconnect): likewise, for disconnections.
* gparam.[hc] (g_param_spec_pool_lookup): took out trailer support.
* gvalue.[hc]: marked g_value_fits_pointer() and g_value_peek_pointer()
as private (the latter got renamed from g_value_get_as_pointer()).
Wed Mar 7 09:32:06 2001 Tim Janik <timj@gtk.org>
* glib-object.h: add gvaluearray.h.
* gstring.[hc]: fixup naming of g_string_sprint*.
* gtypes.h: fixed GCompareDataFunc naming.
Wed Mar 7 09:33:27 2001 Tim Janik <timj@gtk.org>
* gobject/Makefile.am: shuffled rules to avoid excessive
rebuilds.
* gobject/gobject-sections.txt: updates.
* gobject/tmpl/*: bunch of updates, added another patch
from Eric Lemings <eric.b.lemings@lmco.com>.
Sat Feb 17 04:55:35 2001 Tim Janik <timj@gtk.org>
* gtype.[hc]: changed collect_format, collect_value() and lcopy_format,
lcopy_value() in the GTypeValueTable. the collect functions are now
called only once per value, collect_format/lcopy_format are strings
that enlist all necessary GTypeCValues to be varargs-collected.
* gvalue.h: ranamed STATIC_TAG to G_VALUE_NOCOPY_CONTENTS to indicate that
a value shouldn't copy its contents.
* gvaluecollector.h: changed G_VALUE_COLLECT() and G_VALUE_LCOPY()
macros to carry an additional argument (flags) that can be used
to pass G_VALUE_NOCOPY_CONTENTS along to the collection functions.
* *.c: adapted collect_value() and lcopy_value() functions to the new
prototypes, support G_VALUE_NOCOPY_CONTENTS where apropriate.
* gsignal.[hc]: introduced a G_SIGNAL_TYPE_STATIC_SCOPE flag that can
be passed along (ORed) with the parameter types, indicating that the
emission arguments are to be considered static for the scope of the
emission. should be used with care and only if the caller knows that
a parameter cannot be destroyed/freed from signal handlers connected
to an emission.
Sun Feb 4 07:38:32 2001 Tim Janik <timj@gtk.org>
* docs/debugging.txt: s/glib_trap_/g_trap_/. add comments on
g_trap_instance_signals, g_trace_instance_signals and
GRUNTIME_DEBUG.
* gmem.c: s/glib_trap_/g_trap_/.
Sun Feb 4 07:30:53 2001 Tim Janik <timj@gtk.org>
* gtype.[hc]: changed g_type_init() to take debugging flags
initially, a combination of G_TYPE_DEBUG_OBJECTS and
G_TYPE_DEBUG_SIGNALS. using the G_TYPE_ prefix is a bit odd
here, but basically g_type_int() serves as initialization
fucntion for all of GType, GObject, GSignal, so what the heck.
* gobject.c: special case debugging code properly.
changed glib_trap_object_ref to g_trap_object_ref.
* gsignal.c: add signal emission debugging abilities, along with
a new trap object g_trap_instance_signals.
Wed Jan 31 07:14:22 2001 Tim Janik <timj@gtk.org>
* gobject/Makefile.am: adapt to work with new CVS gtk-doc, leaving the old
rules in place caused bogus recursions. main changes:
- add to conditionalized section:
all-local:
$(MAKE) scan
$(MAKE) templates
$(MAKE) sgml
$(MAKE) html.stamp
html.stamp: sgml.stamp $(EXTRA_SGML_FILES)
$(MAKE) html
DOC_STAMPS= html.stamp sgml.stamp
- change:
maintainer-clean-local: clean
- cd $(srcdir) && rm -rf sgml html $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
+ cd $(srcdir) && rm -rf sgml html $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt $(DOC_STAMPS)
* glib/Makefile.am (maintainer-clean-local): dito.
Wed Jan 31 06:21:32 2001 Tim Janik <timj@gtk.org>
* gobject/tmpl/types.sgml: applied docu patch from Eric Lemings
<eric.b.lemings@lmco.com>, did some more editing.
Wed Jan 31 06:19:49 2001 Tim Janik <timj@gtk.org>
* gparam.h: gtk-doc sucks for not dealing with #define inside enums.
* gtype.[hc]: added G_TYPE_FLAG_RESERVED_ID_BIT, a bit in the type
number that's supposed to be left untouched (preserved mainly
for the signal code).
* *.c: added thread safety code, based on an old patch from sebastian.
the remaining thread safety issues are now datalists on pspecs (to be
solved im gdataset.c) and gvalue.c where locking concerns value exchange
functionality only, and that's soon to be revised.
Thu Dec 28 10:21:46 2000 Tim Janik <timj@gtk.org>
* gmem.[hc]: got rid of outdated dmalloc support. provide g_try_malloc()
and g_try_realloc() which _may_ fail and return NULL.
nuked g_mem_check(), provided GMemVTable for memory function
virtualization, alterable at program startup with g_mem_set_vtable().
provided glib_mem_profiler_table and g_mem_profile() to support limited
profiling information out of the box (uses mprotect() for free()ed areas
on linux).
provide globally visible G_MEM_ALIGN.
buncha cleanups.
* docs/macros.txt: file to get a clue about the various configuration
macros.
* docs/debugging.txt: explain debugging traps.
* configure.in: got rid of --enable-mem-check and --enable-mem-profile,
define GLIB_SIZEOF_VOID_P and GLIB_SIZEOF_LONG. check malloc prototypes
and define SANE_MALLOC_PROTOS is we can use them.
<boy, is this file a mess>
* gutils.c, gscanner.c: fix up compatibility warnings, use g_message().
Thu Dec 28 11:36:44 2000 Tim Janik <timj@gtk.org>
* gbsearcharray.c (upper_power2): disable G_BSEARCH_ALIGN_POWER2
fucntionality if DISABLE_MEM_POOLS is defined.
* gtype.c: honour DISABLE_MEM_POOLS.
* gsignal.c (g_signal_init): flag signal key bsearch array with
G_BSEARCH_ALIGN_POWER2 to avoid excessive growth time. honour
DISABLE_MEM_POOLS.
* gparam.h: added G_PARAM_READWRITE alias for (G_PARAM_READABLE |
G_PARAM_WRITABLE).
