Mounts are currently completed only if the prefix looks like scheme,
however, this doesn't work well if the mounts have also path component.
Let's always include them to fix this issue. The mounts are cached by the
volume monitors, so it should not significantly affect the performance.
Currently, "gio mount google-drive<tab>" isn't completed even though
that volume exists for google-drive://oholy@redhat.com/. Let's use
"gio mount -li" output to complete also activation roots of volumes.
Currently, "gio list file:///h<tab>" doesn't complete "file:///home"
because the result of "dirname file:///h" is not "file:///" but "file:/",
which breaks the consequent logic. Let's subtract basename from the
path in order to workaround this issue.
Fixes build failure:
../gio/gunixmounts.c: In function ‘_g_get_unix_mounts’:
../gio/gunixmounts.c:742:53: error: ‘struct mnttab’ has no member named ‘mnt_opts’; did you mean ‘mnt_mntopts’?
742 | mntent.mnt_opts,
| ^~~~~~~~
| mnt_mntopts
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
g_date_time_add_seconds() and g_date_time_add_full() use floating-point
seconds, which can result in the value varying slightly from what's
actually on disk. This causes intermittent test failures in
gio/tests/g-file-info.c on Debian i386, where we set a file's mtime
to be 50µs later, then read it back and sometimes find that it is only
49µs later than the previous value.
I've only seen this happen on i386, which means it might be to do with
different floating-point rounding when a value is stored in the 80-bit
legacy floating point registers rather than in double precision.
g_date_time_add() takes a GTimeSpan, which is in microseconds;
conveniently, that's exactly what we get from the GFileInfo.
Bug-Debian: https://bugs.debian.org/941547
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we're cross-compiling, the installed-tests are useful even if we
can't run them on the build machine: we can copy them to the host
machine (possibly via a distro package like Debian's libglib2.0-tests)
and run them there.
While I'm changing the build-tests condition anyway, deduplicate it.
Based on a patch by Helmut Grohne.
Bug-Debian: https://bugs.debian.org/941509
Signed-off-by: Simon McVittie <smcv@collabora.com>
Skip it on systems which don’t support it, rather than compiling it out.
That gives us more information from test runs about which tests are
being run on which architectures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As with the previous commit, `st_mode` contains both the file type
(regular file, directory, symlink, special, etc.) and the file mode. For
`G_FILE_ATTRIBUTE_ID_UNIX_MODE`, we only want the file mode — so mask
`st_mode` with `~S_IFMT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
chmod() technically only accepts file modes, not the file type and mode
as returned by stat(). Filter by `S_IFMT` to avoid sending the file
type (regular file, directory, symbolic link, etc.).
In practice, chmod() ignores anything except the file mode, but we might
as well comply with the specification.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
`GFile` always checks whether these vfuncs are `NULL` before calling
them, so document that it’s safe for implementations of `GFile` to not
implement them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The caller assumes that an unimplemented vfunc means that copying is
unsupported (and falls back to its internal copy implementation), so
there’s no point in implementing the vfunc just to unconditionally
return `G_IO_ERROR_NOT_SUPPORTED`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Rather than defining a vfunc which only ever returns
`G_IO_ERROR_NOT_SUPPORTED`, just don’t define the vfunc at all. The
caller in `GFile` interprets this as symlinks not being supported — so
we get the same behaviour, but without spending a vfunc call on it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The string is already translated in `GLocalFile`, so this doesn’t
introduce a new translatable string.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This sets the `G_FILE_COPY_DEFAULT_PERMS` flag on the operation,
creating the copied file with default permissions rather than the same
permissions as the source file.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #174
If a copy operation is started with `G_FILE_COPY_TARGET_DEFAULT_PERMS`,
don’t create the destination file as private. Instead, create it with
the process’ current umask (i.e. ‘default permissions’).
This is a partial re-work of commit d8f8f4d637, with
input from Ondrej Holy.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #174
The actual parameter name in g_file_attribute_matcher_new()
attributes, so change the param reference to match. This way,
doc tools can create a proper link.
g_file_info_set_modification_time() and
g_file_info_set_modification_date_time() set the
G_FILE_ATTRIBUTE_TIME_MODIFIED_USEC attribute in addition to
G_FILE_ATTRIBUTE_TIME_MODIFIED, so microsecond precision is available
when provided by the caller, so mention both attributes in the docs.
Currently, there is no quick way to find whether and element is already
part of a list store, except for manually writing a for-loop and calling
`g_list_model_get_item()` and breaking when you find the item.
This is mostly just a small API addition to support this use case.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1011
When compiling GLib with `-Wsign-conversion`, we get various warnings
about the atomic calls. A lot of these were fixed by
3ad375a629, but some remain. Fix them by
adding appropriate casts at the call sites.
Note that `g_atomic_int_{and,or,xor}()` actually all operate on `guint`s
rather than `gint`s (which is what the rest of the `g_atomic_int_*()`
functions operate on). I can’t find any written reasoning for this, but
assume that it’s because signedness is irrelevant when you’re using an
integer as a bit field. It’s unfortunate that they’re named a
`g_atomic_int_*()` rather than `g_atomic_uint_*()` functions.
Tested by compiling GLib as:
```
CFLAGS=-Wsign-conversion jhbuild make -ac |& grep atomic
```
I’m not going to add `-Wsign-conversion` to the set of default warnings
for building GLib, because it mostly produces false positives throughout
the rest of GLib.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1565
They provide more detailed failure messages, and aren’t compiled out
when building with `G_DISABLE_ASSERT`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When future porting deprecated code to use
g_file_info_get_modification_date_time() we risk a number of breakages
because the current implementation also requires the additional use of
G_FILE_ATTRIBUTE_TIME_MODIFIED_USEC. This handles that situation gracefully
and returns a GDateTime with less precision.
Applications that want the additional precision, are already using the
additional attribute.
(Minor tweaks by Philip Withnall.)
This should make the code a bit easier to reason about, and squash some
static analysis warnings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
The macros for the probes confuse the static analyser, and are often
called with arguments which the analyser things shouldn’t be used any
more (for example, the address of a block of memory which has just been
freed).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
These squash various warnings from `scan-build`. None of them are
legitimate bugs, but some of them do improve code readability a bit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1767
Previously, if a method was not annotated with org.gtk.GDBus.C.UnixFD
then the generated code would never contain GUnixFDList parameters, even
if the method has 'h' (file descriptor) parameters. However, in this
case, the generated code is essentially useless: the method cannot be
called or handled except in degenerate cases where the file descriptors
are missing or ignored.
Check the argument types for 'h', and if present, generate code as if
org.gtk.GDBus.C.UnixFD annotation were specified.
This change will break any existing code which refers to the (useless)
wrappers for such methods. The workaround for such code is to add the
org.gtk.GDBus.C.UnixFD annotation, which will cause the same generated
code to be emitted before and after this change.
If this is found to cause widespread problems, we can explore a
different approach (perhaps emitting a warning from the code generator,
or annotating the symbols as deprecated).
https://gitlab.gnome.org/GNOME/glib/issues/1726
Instead of letting each directory to find its way to link with libdl,
it is easier to put the check in the top level, so its result can be
used by all directories.
It is a follow-up of https://gitlab.gnome.org/GNOME/glib/merge_requests/810.
The header file was installed when building using autotools, but was
inadvertently omitted in the meson targets.
Luckily, ABI is not impacted, since gnativesocketaddress.c was always
compiled and linked into libgio.
Fixes: #1854
The gobject introspection comments have a reference to an incorrect
class: they have, as 'self', the GSubprocess class instead of
GSubprocessLauncher.
This patch fixes this.
g_settings_backend_watch() uses a weak notify for keeping track of
the target. There's an explanation why this is supposed to be safe but
that explanation is wrong.
The following could happen before:
1. We have the target stored in the watch list
2. The last reference to the target is dropped in thread A and we end up
in g_settings_backend_watch_weak_notify() right before the mutex
3. g_settings_backend_dispatch_signal() is called from another thread B
and gets the mutex before 2.
4. g_weak_ref_init() is called on the target from thread B, which at
this point has a reference count of exactly one (see g_object_unref()
where it calls the weak notifies)
5. Thread A continues at 3. and drops the last reference and destroys
the object. Now the GWeakRef from 4. points to a destroyed object. Note
that GWeakRefs would be cleared before the weak notifies are called
6. At some later point another thread g_weak_ref_get() is called by
g_settings_backend_invoke_closure() and accesses an already destroyed
object with refcount 0 from the GWeakRef created in 4. by thread B (or
worse, already freed memory that was reused).
Solve this by actually storing a GWeakRef of the target in the watch
list and only access the target behind it via the GWeakRef API, and then
pass a strong reference to the notification dispatch code.
The weak notify is only used to remove the (potentially with empty
GWeakRef) target from the list of watches and the only place that
compares the target by pointer instead of going through the GWeakRef
API.
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1870
If we fail to create a GWinhttpFile for a URI (for example, because it’s
an invalid URI or is badly encoded), don’t just return NULL. Instead,
fall back to the wrapped VFS which might be able to handle it instead.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1819
It can return NULL if the URI was badly encoded or couldn’t be handled
by Windows’ API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1819
It cannot return a NULL value, as none of its callers have error
handlng. Add an assertion to check the values returned by the VFS
implementations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1819
This fixes use of `GIO_USE_VOLUME_MONITOR=help`, and simplifies the
code. The reason this wasn’t used already seems to just be because it
was missed when `_g_io_module_get_default_type()` was introduced in
2013. The previous `get_default_native_class()` code in
`gunionvolumemonitor.c` was introduced in 2007.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1881
Deletes the skip annotation from g_cancellable_source_new(). This was
originally added because GSource wasn't introspectable, but this is no
longer an issue as G_TYPE_SOURCE was added in 2.30.
Fixes: #1877
When resetting a key in the delayed settings backend,
g_settings_backend_changed() was not called to notify the backend of
the change.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1309
This fix build error for projects that use gnome.compile_resources()
when glib is built as a subproject and not installed on the build
machine.
Note that this is not working for cross compilation cases, because it
would require to compile everything twice (for host and build machines).
A better solution would be to rewrite those tools in python. See #1859.
They use the deprecated GTimeVal type, which is not year 2038 safe, so
have to be deprecated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1438
These are alternatives to g_file_info_{get,set}_modification_time(),
which will soon be deprecated due to using the deprecated GTimeVal
type, which is not year 2038 safe.
The new APIs take a GDateTime instead.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1438
The event source used to handle inactivity_timeout doesn't hold a
reference on the application. Therefore, it is possible for callback
function of the event source to run after the application has been
freed, leading to use-after-free problem. To avoid the problem, we
should remove the event source before the application is freed.
This should fix SIGBUS crash of gio/tests/gapplication on FreeBSD.
https://gitlab.gnome.org/GNOME/glib/issues/1846#note_566550
These are here to prevent linker errors, since `gcontenttype.[ch]`
aren’t compiled on Windows or macOS.
The implementations are stubs to be filled out by someone who knows each
platform, at some point in the future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1791
We're using the `install` argument for configure_file() all over the
place.
The support for an `install` argument for configure_file() was added in
Meson 0.50, but we haven't bumped the minimum version of Meson we
require, yet; which means we're getting compatibility warnings when
using recent versions of Meson, and undefined behaviour when using older
versions.
The configure_file() object defaults to `install: false`, unless an
install directory is used. This means that all instances of an `install`
argument with an explicit `true` or `false` value can be removed,
whereas all instances of `install` with a value determined from a
configuration option must be turned into an explicit conditional.
The comment previously said ‘never %NULL’, but it wasn’t clear whether
this meant `(not nullable)` or `(not optional)`. From looking at the
code, it means `(not optional)`.
Clarify things by removing the prose. The annotations themselves should
be clear and explicit enough.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1836
We want to use the keyfile backend in sandboxes,
but we want to avoid people losing their existing
settings that are stored in dconf. Flatpak does
a migration from dconf to keyfile, but only if
the app explictly requests it.
From an app perspective, there are two steps to
the dconf->keyfile migration:
1. Request that flatpak do the migration, by adding
the migrate-path key to the metadata
2. Stop adding the 'dconf hole' to the sandbox
To keep us from switching to the keyfile backend
prematurely, look at whether the app has stopped
requesting a 'dconf hole' in the sandbox.
The plugin modules in these tests get statically linked with a separate
copy of GLib so they end up calling vfuncs in their own copy of GLib.
Fixes#1648
v7, based on a patch by mrgard (GNOME/glib#1635)
make w32_adapter_ipv4_addr() C90-compliant
check for ERROR_BUFFER_OVERFLOW when calling GetAdaptersAddresses()
code-style fixes
indentation fixes
use g_try_(re)alloc and g_free
style suggestions by pwithnall
drop uni_count variable
cap maximum allowed interface name string length according to windows documentation
Fixes: #1635
We need to enable building the dirent and gnulib sources for clang-cl,
as we are still using the Microsoft-style headers and lib's and CRT.
We need to also do this for the following, for similar reasoning:
-Symbol export (via __declspec(dllexport))
-Dependency discovery without pkg-config files
-long long and ssize_t detection
We do, however, enable the autoptr tests for clang-cl builds. Note that
at this point real MSVC builds are still better supported than clang-cl
builds, and it will likely remain so for at least the near future,
alhtough real MSVC builds of the GTK stack are consumable and are usable
by clang-cl.
In _g_object_unref_and_wait_weak_notify() we take a weak reference and
then call g_object_unref() in an idle callback, which may look like
we're dropping a strong reference without having one. So change the
comment to make it more clear that the reference being dropped is held
by the caller.
Now that we're not calling g_object_run_dispose() indirectly in
g_test_dbus_down() (see commit "Revert "gtestdbus: Properly close server
connections""), the test gdbus-connection-loss is failing with the
message "Bail out! GLib-GIO-FATAL-WARNING: Weak notify timeout, object
ref_count=1". This is because we're holding a reference to the singleton
connection object while calling session_bus_down() in the test's main().
So then we end up waiting for 30 seconds in
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered, which never happens.
The fix is to unref the connection before calling session_bus_down().
This is consistent with how other tests work, and is safe because the
only method called on the connection has already errored out, as
asserted by the test.
This reverts commit c37cd19fee.
Now that we've reverted the commit "gtestdbus: Properly close server
connections", g_test_dbus_down() no longer returns early and we no
longer need this workaround. Since the gdbus-names test seems to
properly unref its GDBusConnection objects it's not clear to me why it
needed the sleep to succeed. However even at the time the failure wasn't
reproducible according to this comment[1] so it's probably not worth
spending more effort trying to reproduce it now.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214235
This reverts commit baf92d09d6.
Closes#787
According to the original commit, this change was made because otherwise
g_test_dbus_down() following a g_test_dbus_stop() hangs until it times
out. The timeout being referred to is the 30 seconds which are waited by
_g_object_unref_and_wait_weak_notify() for the GWeakNotify to be
triggered when the last strong reference to the singleton
GDBusConnection object is dropped. But the patch was not correct and the
leak should have instead been fixed by having the last strong reference
holder drop their reference on the GDBusConnection before calling
g_test_dbus_down(). Timing out after 30 seconds is the desired behavior
in the case where someone holds a reference to the singleton for that
entire period.
There are a few problems with this patch. First, as pointed out here[1],
calling g_object_run_dispose() in the idle callback means we are causing
the GWeakNotify to trigger ~immediately rather than waiting 30 seconds
to give another owner a chance to unref. Second, since someone else may
still hold a reference on the object being disposed, they may call
methods on it after it's been disposed which can seg fault as documented
here[2] and as I also saw recently in another project.
It's unclear what the original leak being fixed was, but many have been
fixed between 2013 and now. I ran all the unit tests under valgrind, and
some do fail (some consistently and some intermittently) but none of the
failures seem to only happen after this reversion commit. I also
couldn't find anywhere in the valgrind output where any GDBusConnection
objects are definitely being lost.
[1] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214226
[2] https://gitlab.gnome.org/GNOME/glib/issues/787#note_214237
For several years now (I haven’t looked up the exact date),
`gnome-terminal` has preferred being called as `gnome-terminal
--terminal-args -- /some/other/program --its-args` rather than as
`gnome-terminal --terminal-args -x /some/other/program --its-args`.
Since 2017 it has warned about uses of `-x` (see
ad4edbd118).
So we should change our calling convention for it.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There seems to be no reason to do so, and since the `appinfo` test was
ported to use `G_TEST_OPTION_ISOLATE_DIRS`, it has been causing
coredumps to accumulate. `gnome-terminal` was chosen as the terminal,
but it couldn’t find its GSettings schemas due to all the XDG
environment variables being cleared to `/dev/null` by
`G_TEST_OPTION_ISOLATE_DIRS`.
In order to keep using `gnome-terminal` as a subprocess in the tests,
we’d need to explicitly set up its environment so it can load the right
GSettings schemas. That’s a lot of work for not much gain.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #436
This commit changes a comment in _g_dbus_worker_do_read_cb() to be
slightly more useful. At least in my experience debugging an
intermittent unit test failure in another project, this failure
condition occurred because although g_test_dbus_down() ensures that the
session GDBusConnection has exit-on-close set to FALSE before killing
its dbus-daemon, there was still a GDBusConnection on the system bus
which hit this failed read code path, because we had
DBUS_SYSTEM_BUS_ADDRESS set to the address of the #GTestDBus daemon, to
appease libudisks.
Also, make a few other minor improvements to the docs.
On Visual Studio, Meson builds modules as xxxx.dll, not libxxxx.dll when
xxxx is specified as the name for the shared_module() build directive.
This means that in the test programs if we expect for libxxxx for the
module name, the test will fail as there is no libxxxx.dll but there is
xxxx.dll. This makes the test program look for the module files
correctly.
This makes use of the string we now have from glib-private.h in the
last commit so that setlocale() sets the default system locale
correctly and therefore show the translated messages properly.
Fixes issue #1169.
Using the generic marshaller has drawbacks beyond performance. One such
drawback is that it breaks the stack unwinding from the Linux kernel due
to having unsufficient data to walk past ffi_call_unixt64. That means that
performance profiling by application developers looks grouped among
seemingly unrelated code paths.
While we can't fix the kernel unwinding here, we can provide proper
c_marshallers and va_marshallers for objects within Gio so that
performance profiling of applications is more reliable.
Related to GNOME/Initiatives#10
If c_marshaller is provided during g_signal_new() registration, the
automatic va_marshaller will not be set. If we leave the c_marshaller as
NULL in the simple cases, both a c_marshaller and va_marshaller will be
set for us.
This is particularly helpful when dealing with stack traces from Linux
perf, which often cannot unwind the stack beyond the ffi_call_unix64
stack-frame on x86_64.
Related to GNOME/Initiatives#10
This ensures that D-Bus connections established with unix:dir and
unix:path addresses actually work properly. Previously, we only tested
unix:tmpdir and TCP addresses.
This is not going to have much any effect currently since stop() just
disconnects a signal handler (that is going to be disconnected in
finalize anyway) and stops the socket service (that is going to be
destroyed in finalize), but it makes sense to do here for robustness.
unix:dir= addresses are exactly the same as unix:tmpdir= addresses,
already supported by GDBus, except they forbid use of abstract sockets.
This is convenient for situations where abstract sockets are
impermissible, such as when a D-Bus client inside a network namespace
needs to connect to a server running in a different network namespace.
An abstract socket cannot be shared between two processes in different
network namespaces.
Applications could use unix:path= addresses instead, so this is only a
convenience, but there's no good reason not to support unix:dir=.
Currently it is not supported simply because unix:dir= is a relatively
recent addition to the D-Bus spec.
It's somewhat unrealistic to use a GDBusServer without a
GDBusAuthObserver, because most D-Bus servers want to be like the
standard session bus (the owning user can connect) rather than being
like the standard system bus (all users can connect, the server is a
security boundary, and many bugs are security vulnerabilities).
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is simpler and more robust than DBUS_COOKIE_SHA1, which relies
on assumptions about random numbers and a secure home directory.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Authentication is about proving who I am; authorization is about
whether, given the knowledge of who I am, I am allowed to do something.
GDBusServer and GDBusConnection carry out authentication automatically,
but rely on the library user to carry out authorization.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This is useful information for implementors of portable software to know
whether they can rely on credentials-passing.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously, its tests were being run in the build directory, which is
fine (it should always be writable). If multiple tests were run in
parallel, for example with Meson’s `--repeat` option, their test files
would collide.
Fix that by running each test instance in a separate subdirectory of
`/tmp`.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1634
It is expected that `g_file_move()` moves symlink file itself, not its
target. Unfortunately, copy and delete fallback passes `GFileCopyFlags`
and don't explicitly use `G_FILE_COPY_NOFOLLOW_SYMLINKS`. This may cause
that symlink target is copied and symlink itself is removed. Let's
explicitly pass `G_FILE_COPY_NOFOLLOW_SYMLINKS` to the copy operation to
prevent this unexpected behavior.
https://gitlab.gnome.org/GNOME/glib/issues/986
The `G_FILE_COPY_NOFOLLOW_SYMLINKS` flag doesn't make sense for move operation,
neither local implementation doesn't handle this flag in any way. Therefore
this paragraph should be removed from the docs (it was probably copy&pasted
from `g_file_copy()` docs by mistake).
Closes: https://gitlab.gnome.org/GNOME/glib/issues/986
Add a case for when the IPv6 result comes back negative and the IPv4
result is significantly delayed. This is exactly the case that causes
the bug addressed by GNOME/glib!865
The "happy eyeballs" RFC states that on receiving a negative response
for an IPv6 address lookup, we should wait for the IPv4 lookup to
complete and use any results we get from there.
The current code was not doing that: it was rather setting a timeout for
failing the resolution entirely. In scenarios where the IPv4 response
comes more than 50ms after the IPv6 response (which is easily attainable
under valgrind in certain configurations) this means that the IPv4
response will never come.
Remove the timeout and just wait.
See merge request GNOME/glib!865
It should produce a generic result, but not crash. It was previously
crashing on macOS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1729
g_assert_*() give more helpful error messages on failure, and aren’t
compiled out by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This was introduced in commit 7846d6154a: g_subprocess_get_identifier()
will return NULL after the subprocess has exited, and the subprocess in
the `noop` test will exit as soon as it has started spawning. So if the
scheduler scheduled the testprog subprocess quickly, descheduled the
parent test process until the testprog exited, then the return value
from g_subprocess_get_identifier() would be NULL.
Move the g_subprocess_get_identifier() test to one which calls testprog
in `sleep-forever` mode, since that is guaranteed not to exit until
killed (which we do later in the test).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The most useful ones were already listed in the pkg-config file, but
some others (notably, `gio-querymodules`) were not. List them in the
pkg-config file with their installed paths so that the right binary is
used if GIO is installed in a non-default path.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1796
`NM_STATE_CONNECTED_SITE` is documented to mean that a default route is
available, but that the internet connectivity check failed. A default
route being available is compatible with the documentation for
GNetworkMonitor:network-available, which should be true if the system
has a default route for at least one of IPv4 and IPv6.
https://developer.gnome.org/NetworkManager/stable/nm-dbus-types.html
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1788
More vectors will give an error and we can simply clamp here and
consider it like a short write instead.
In case of GSocketOutputStream this is done here instead of inside
GSocket before calling sendmsg() because we we can't generically handle
short writes when sending messages on a socket, e.g. for datagram
sockets this causes only part of the datagram to be sent and an error
would be more useful in this case than sending corrupted data.
Also reduce the fallback limit to 16 in gsocket.c as that's the minimum
value required by POSIX and add a static assertion that the limit is
never bigger than G_MAXINT as that's the type recvmmsg/sendmmsg take.
These have all been documented as deprecated for a long time, but we’ve
never had a way to programmatically mark them as deprecated. Do that
now.
This is based on the list of deprecations from the reverted commit
80fcb1bc2.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #638
This code uses, or tests, deprecated functions, types or macros; so
needs to be compiled with deprecation warnings disabled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When defining deprecated macros, annotate them with
`GLIB_DEPRECATED_MACRO_IN_*()` and `GLIB_DEPRECATED_MACRO_IN_*_FOR()` to
conditionally emit warnings if people use them, depending on their
declared minimum and maximum GLib version requirements (see
`GLIB_VERSION_MIN_REQUIRED` and `GLIB_VERSION_MAX_ALLOWED`).
The old way of doing this was for users to define `G_DISABLE_DEPRECATED`
if they didn’t want to use deprecated APIs, but it reported errors via
missing symbols, and wasn’t version-dependent. It’s being phased out.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
file_copy_fallback creates new files with default permissions and
set the correct permissions after the operation is finished. This
might cause that the files can be accessible by more users during
the operation than expected. Use G_FILE_CREATE_PRIVATE for the new
files to limit access to those files.
When an application is launched using Launch Services
osx will add an extra parameter which we were not
handling and then gapplication would abort. Instead we make
an initial parsing and like this we avoid the abort if this
parameter is provided
Fixes https://gitlab.gnome.org/GNOME/glib/issues/1784
The caller cannot assume that the lists returned by various GSettings
functions (for example, lists of keys or schemas) will be returned in
any particular order.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1781
The parent GNetworkAddress contains a shared list of resolved
addresses that is used as a cache for multiple enumerations.
This commit ensures that the cache is only set upon completion of
DNS lookups and only read once by enumerations to avoid being in a
bad state.
Fixes#1771
We miss releasing the async operation's reference on a state object in
one of the error cases.
The call to connection_attempt_remove() (although it calls unref
internally) is not sufficient because this is releasing the reference
that the list owns.
Closes#1774
Spotted in https://gitlab.gnome.org/GNOME/mutter/issues/586. Bad input
on GAppLaunchContext environment manipulation functions is caught by
inner code, but the warning is not seemingly related.
Add precondition checks to these functions so it's clear where does the
bad input come from.
The network-available property can be asserted by querying the NMState
describing the current overval network state, instead of the
NMConnectivityState. The advantage of the NMState is that is reflects
immediately the network state modification, while the connectivity
state is tested at a fixed frequency.
Add support for mate-terminal and xfce4-terminal with higher precedence
over xterm as it's likely people that have those want to use them.
They both use the gnome-terminal `-x` switch instead of xterm's `-e`.
Some of these have a negative master/slave connotation, and they add no
value. Change or drop them.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Since out-of-source-tree builds are now used after switching to meson,
we don't need .gitignore files in the source directories to ignore
build artifacts.
This fixes build errors when doing a meson build after an autotools
build, because generated files such as gio/xdp-dbus.c won't show up in
a `git status`, or be removed by a `git clean -f`, and so it won't be
obvious that such files need to be removed for the meson build to
succeed.
The `monitor` test was originally written to test GFileMonitor with
directories. Over time, `testfilemonitor` acquired units for testing
directories as well, which made the `monitor` test reduntant.
We are manually tracking the completion state of the connect task
so avoid just calling g_task_return_error_if_cancelled() without
checking that.
Fixes#1747
Currently, there is no way to prevent tests from building using meson.
When cross-compiling, building the tests isn't necessary.
Instead, only build the tests on the following conditions:
1) If not cross-compiling.
2) If cross-compiling, and there is an exe wrapper.
Other GCC-like implementations of ld/objcopy (like LLVM) don’t yet
support the right command line arguments, so can’t compile the test.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1709
This introduces no functional changes, but combines two duplicated lists
and makes the meson.build file a little easier to follow.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1711
After repeated local testing, I can’t reproduce failures with them:
meson test --repeat 5000 gdbus-auth
meson test --repeat 5000 gdbus-bz627724
meson test --repeat 5000 gdbus-connection
The FreeBSD failures from pthread calls mentioned in #1614 should
probably manifest as use-after-free for GMutex or pthread_mutex_t on
Linux. Failing that, I haven’t seen any relevant FreeBSD failures on CI
for at least a month, so if it’s not fixed, the chances of debugging are
very low.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1614
Add g_steal_pointer() and g_clear_object() calls in various places to
clarify the ownership transfers for GDBusMessage instances, in a bid to
understand what’s going on in this code and to try to find a
use-after-finalize problem.
This introduces no functional changes, but hopefully makes the code a
little clearer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
If the filter function for an outgoing message fails to copy the
GDBusMessage, that failure was previously ignored, and GDBusMessage
methods could be called on a NULL instance.
Avoid that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Rather than keeping a reference to the GThreadedSocketService as the
user_data for every thread pool job, add it to a member of the per-job
data struct (GThreadedSocketServiceData). This should make no
difference overall, as it’s just moving the refcounting around, but it
does seem to fix an occasional double-unref crash on shutdown where the
GThreadedSocketService is unreffed during finalisation.
In any case, it makes the object ownership clearer.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Check for RTLD_NEXT being present, and disable the gsocketclient-slow
test if it's absent, since the shlib dependency of that test requires
RTLD_NEXT to function.
This allows the testsuite to be built on Cygwin, which behaves
exactly like UNIX, but doesn't have RTLD_NEXT.
On OSX both backends are built. Generally we want to use the cocoa
backend by default and in case it is not supported, i.e because
the application is not using a bundle then we should fallback
to the gtk one.
ostream_flush_cb() was calling flush_data_list_complete() with a single
element list with an item that had already been freed. This was observed
on OpenBSD where memory is overwritten with 0xdf during free():
error=0x0) at ../glib-2.58.3/gio/gdbusprivate.c:1156
1156 g_mutex_lock (&f->mutex);
(gdb) p /x *f
$74 = {mutex = {p = 0xdfdfdfdfdfdfdfdf, i = {0xdfdfdfdf, 0xdfdfdfdf}},
cond = { p = 0xdfdfdfdfdfdfdfdf, i = {0xdfdfdfdf, 0xdfdfdfdf}},
number_to_wait_for = 0xdfdfdfdfdfdfdfdf, error = 0x0}
This happened because the thread freeing the element didn't properly wait
for the asynchronous flush operation to finish.
Gnome's developer docs say: "g_cond_wait() must always be used in a loop"
https://developer.gnome.org/glib/stable/glib-Threads.html#g-cond-wait
It returns a string in the libc locale, which is not necessarily UTF-8.
Convert that to UTF-8 before returning it to the caller.
Spotted by Tomasz Miąsko.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1732
More mounts can have same mount path, but only the last one is
accessible. Thus we should always return the last matching mount from
g_unix_mount_at() and g_unix_mount_for(). This should also solve
problems with g_file_trash() on automounted filesystems, which are
caused by the recently added mount checks.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1727
instead of using a generic G_IO_ERROR_FAILED error code.
This is in line with what W32 part of the code is doing with WSAENOTSOCK.
This fix will break two tests in libsoup, which were written following
the implementation and thus expect G_IO_ERROR_FAILED when attempting to
do stuff with no-longer-valid socket descriptors.
This reverts commit 80fcb1bc26.
G_DISABLE_DEPRECATED should never be used by anybody, least of all by
GLib. We have deprecation annotations for the compiler, these days, and
they are much better suited than a macro that makes symbols appear and
disappear. The fact that gtk-doc doesn't understand the deprecation
annotations is a limitation of gtk-doc, and it's gtk-doc that ought to be
fixed.
Commit 80fcb1bc broke GStreamer, which disables old API that was
deprecated before the introduction of the deprecation annotations, but
still uses newly deprecated one, and relies on the deprecation
annotations to do their thing. It also broke libsoup, as it uses
GValueArray in its own API.
Just skip the test if the unix transport isn’t supported. This means we
get better compilation coverage, and more explicit TAP output saying
that the test is being skipped on unsupported platforms.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The specification doesn’t explicitly say this, but it doesn’t say
otherwise, and it would be pretty weird to have an empty transport name
or key.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
No need for the `meaningless` label and some unreachable if-branches.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
While gtk-doc can currently detect a link to a symbol which has been
pluralised by adding ‘s’, it can’t detect when ‘es’ is added. While
that’s being fixed, reword the documentation so the links are generated
correctly anyway.
gtk-doc fix here: https://gitlab.gnome.org/GNOME/gtk-doc/merge_requests/22
Signed-off-by: Philip Withnall <withnall@endlessm.com>
As pointed out by gtk-doc, these are all symbols which have been marked
as deprecated, but which aren’t protected by a deprecation guard. We
can’t use G_DEPRECATED_IN_* for them, as they are all non-function
symbols. Instead, wrap them in #ifndef G_DISABLE_DEPRECATED.
In some cases, we also need to wrap one or two functions which use the
deprecated types in G_DISABLE_DEPRECATED too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
If using the --interface-info-{body,header} options to gdbus-codegen,
and the first interface to be outputted has no methods, but does have
properties or signals, an uninitialised variable would be used for the
property/signal ‘since’ values.
In other situations, the ‘since’ value for a prior method would have
been incorrectly used for the properties/signals.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The test performs implicit autolaunching of a bus
and checks if it is connectible.
In build the test is moved from "only non-windows with have_dbus_daemon"
to "anywhere".
This is intentional: actually it doesn't execute any external
binaries on unix (so doesn't require dbus_daemon)
and now has win32 implementation.
The test has some problems that are not problems of test itself,
but are reasoned by current win32 implementation:
- since the implementation uses global win32 kernel objects
with fixed names not depending on g_get_user_runtime_dir or other context
if preexisting bus running by some other libgio-using application
the test would silently pass.
- since the implementation uses problematic time-based synchronization,
that has a race condition between opening and reading mmaped address,
the test may randomly fail (I'd not seen this in practice).
- since the implementation autolaunched process works for 3 seconds
after last client disconnects, the executed subprocess runs for 3 seconds
after test exit, maybe locking the libgio-2.0-0.dll file for that time.
This is a bit of breaking change:
After this commit the apps relying of win32 dbus autolaunching,
need to install gdbus.exe alongside with libgio-2.0-0.dll.
A new command for gdbus tool is used for running server:
gdbus.exe _win32_run_session_bus
To implement it gdbus.exe uses the same exported function
g_win32_run_session_bus that earlier was used by rundll.
So (private) ABI was not changed.
It runs the bus syncronously, exiting after inactivity timeout -
all exactly like it was runed earlier with the help of rundll32.
While private exported function may have _some_
version compatibility issues between gdbus.exe and libgio-2.0-0.dll
compiling dbus server registration logic directly into gdbus.exe
can lead to _more hidden and more complex_ compatibility issues
since the names and behaviour of syncronization objects
used to publish server address would be required compatible between
gdbus.exe and libgio-2.0-0.dll.
So using "private" exported function to call
looks like more safe behaviour.
gdbus.exe binary was selected for this task since
it has corresponding name and at least for msys2 is shippied
in same package with libgio-2.0-0.dll
turn_off_the_starting_cursor function is also kept as is,
however it is not obvious if it is still needed
(by now I failed reproducing original issue).
Explicit g_warnings added to help with possible
problematic cases for absent or incompatible gdbus.exe
Mainloop is created after successful daemon creation
Before this change the function leaked mainloop on daemon creation fail
nm_conn_to_g_conn already handles UNKNOWN like NONE (returning
G_NETWORK_CONNECTIVITY_LOCAL in both cases). So in sync_properties
we should also set new_connectivity to G_NETWORK_CONNECTIVITY_LOCAL
for both NM_CONNECTIVITY_UNKNOWN and NM_CONNECTIVITY_NONE.
This has the added benefit that when NetworkManager returns the network
connectivity is UNKNOWN, we set network_available to FALSE as it should
be. Previously, there were cases in a laptop with no network access,
that g_network_monitor_get_network_available returned true, which was
wrong and is also fixed with this commit.
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert_*() give more informative failure messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to allow GLib itself to be built with G_DISABLE_ASSERT defined,
we need to explicitly undefine it when building the tests, otherwise
g_test_init() turns into an abort.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1708
g_assert_*() give more informative error messages on failure, and can’t
be disabled by G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This allows referencig them from more than single .c file.
Implementation moved without changes
from gdbusaddress.c to gdbusprivate.c
g_win32_run_session_bus signature also kept, so ABI unchanged.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1566
Short names were used in win32 implementation to allow launching
on installations where full path to libgio-2.0-0.dll contain spaces.
However, short names are optional on windows: so if they were disabled
that method fails - see issue linked above.
Since rundll32 doesn't support neither spaces, nor quotes in cmdline
this patch changes rundll32 argument to just .\gio-dll-name.dll
and uses the entire path directory containing gio dll as rundll32
current directory.
Added comments informing about potential subtleties discovered during
writing test for gdbusaddress on win32.
There are not known to have real-world user-visible effect,
so by now I'm only adding comments without creating issues.
Commit f975858e86 removed the NULL check in g_cancellable_cancel() by
accident which makes it crash when called with NULL.
Add the check back and add a test so this doesn't happen again.
Fixes#1710
Implement the approach suggested in
https://gitlab.gnome.org/GNOME/glib/merge_requests/276
1. Try to open O_RDWR. On success, pass that fd
2. If EACCESS => fail the trash op, we "need" read-write to successfully trash it
3. If EISDIR => re-open the fd with O_PATH, and pass that (which will fail on snap,
but verify the dir for flatpaks)
Don’t pollute the build directory with files generated by running the
test.
Note that there are still other tests in the gsettings.c test suite
which use the build directory, but fixing them is a bit more involved
than I have time for right now. This is a step in the right direction.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
res_ninit() requires the __res_state struct passed to it to be
zero-filled on FreeBSD.
Spotted and analysed by Ashish SHUKLA.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes#1697
Synchronize access to cancelled flag of cancellable, which was
previously access without synchronization in g_cancellable_is_cancelled.
Use atomic operations instead of existing global mutex, to avoid
serializing calls to g_cancellable_is_cancelled across all threads.
Ensure that source is attached to the context before it migth be used
from another thread, since otherwise operation on source are
unsynchronized and not thread-safe.
In particular there was a data race between g_source_attach and
g_source_set_ready_time (used from g_file_monitor_source_handle_event).
This essentially reverts commit
cffed58737.
The preceding two commits have fixed the test so it’s no longer flaky.
The following command gives 5000 passes in a row for me:
meson test -C /opt/gnome/build/glib/ socket-service --repeat 5000
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #1679
It’s occasionally possible for the cancellation of the service to happen
before connection_cb() gets scheduled in the other thread. The
locking/unlocking order of mutex_712570 requires:
• test_threaded_712570(): lock mutex
• test_threaded_712570(): start wait loop
• connection_cb(): lock mutex
• test_threaded_socket_service_finalize(): unlock mutex
• test_threaded_712570(): end wait loop
• test_threaded_712570(): unlock mutex
Fix that by quitting the main loop once connection_cb() has been called
(i.e. once the server thread has received the incoming connection
request), rather than just after the client thread (main thread) has
sent a connection request.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
On about 1 in 3 test runs, the socket-service would fail with the
ref_count assertion in connection_cb() failing (the ref_count would be 3
rather than the expected 2).
This was happening because the GTask from
g_socket_listener_accept_socket_async() now always takes at least one
main context iteration to return a result (whereas before
6f3d57d2ee it might have taken zero), but
the ref_count can drop below 3 before the process of returning a result
starts. During the process of returning a result, the ref_count
temporarily increases again, which is what was breaking the test.
Fix this by waiting for one more main context iteration. This is a bit
of a hack, but the real fix would be to expose the outstanding_accept
boolean from GSocketService as public API (which the test can
interrogate), and that seems too much like exposing internal state.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Helps: #1679
Almost everything that needs gioenumtypes.h also needs
gobjectenumtypes.h. Fixes:
ccache cc @gio/win32/gio@win32@@giowin32@sta/gwin32filemonitor.c.obj.rsp
In file included from ../gio/win32/gwin32filemonitor.h:25:0,
from ../gio/win32/gwin32filemonitor.c:26:
../glib/glib-object.h:37:10: fatal error: gobject/gobjectenumtypes.h: No such file or directory
#include <gobject/gobjectenumtypes.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
GIO modules built with MSVC do not begin with 'lib', but they can
begin with 'gio'. Without this, you can only load GIO modules built
with MSVC that are `name.dll`, not `gioname.dll`.
Eliminate several cases of splitting sentences between multiple
translatable strings, and remove some newlines from the translatable
strings (they always need to be present, and can confuse translation, so
add them unconditionally afterwards).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Compilers get confused when variables are initialized by a function by
taking them as reference in an out argument; this, coupled with the fact
that C does not initialize variables by default, most commonly results
in a "maybe uninitialized" compiler warning.
512e9b3b34 added a call to schedule_pending_close() in the read
callback after the reference to the worker is already gone. In case this was
the last reference to the worker this resulted in a use-after-free.
6f3d57d2ee made this more likely to happen because on connection close
the worker cancel action is now async while the reference to the worker
gets dropped right away.
Move the call to schedule_pending_close() before the unref.
Fixes#1686
When testing as root, changing the permissions of the keyfile will have
no effect on the writability since root bypasses these permissions. See
path_resolution(7). Skip the test in this case.
g_assert_*() give more informative error messages, and aren’t compiled
out when building with G_DISABLE_ASSERT.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
getsockname() returns the address that the socket was bound to.
If it was bound to INADDR_ANY, getsockname() will stubbornly return INADDR_ANY
(and someport - that one is valid).
Subsequent connection attempts to INADDR_ANY:someport will fail with winsock.
Actually, it doesn't make even sense to connect to INADDR_ANY at all
(where is the socket connecting to? To a random interface of the host?),
so this is just a straight-up change, without platform-specific ifdefing.
Use loopback instead of INADDR_ANY. To ensure that binding and creation
of INADDR_ANY is still tested, use two addresses: bind to INADDR_ANY,
but connect to loopback, with the port number that we got from the bound
address.
Use a static GQueue to form the GList of mounts by appending (which
is fast, because GQueue tracks the tail pointer of its internal GList),
then return that GList. This way we don't need to form the list
by prepending, which would have made it necessary to reverse it before
returning.
If the list is not ordered correctly, local drives in GTK places sidebar
are shown in reverse order.
The gsocketclient-slow test needs this, otherwise connect() succeeds
immeidately and the test fails, because it is checking that cancellation
works. We weren't installing it for installed tests.
It's necessary sometimes for installed tests to be able to run with a
custom environment. For example, the gsocketclient-slow test requires an
LD_PRELOADed library to provide a slow connect() (this is to be added in
a followup commit).
Introduce a variable `@env@` into the installed test template, which we
can override as necessary when generating `.test` files, to run tests
prefixed with `/usr/bin/env <LIST OF VARIABLES>`.
As the only test that requires this currently lives in `gio/tests/`, we
are only hooking this up for that directory right now. If other tests in
future require this treatment, then the support can be extended at that
point.
There's no /tmp directory on Windows.
Use g_get_tmp_dir(), and adjust the test to work with that.
The test *still* checks the basename of the new CWD, it just
doesn't need to be "tmp" anymore.
envp in spawn() functions is the *whole* environment table
for the child process. Including PATH. Thus, unless PATH is explicitly
put into that table, the process will be spawned without PATH.
Since on Windows binaries are found via PATH instead of LD_LIBRARY_PATH
or whatever, almost no program (unless installed in WINDIR, maybe)
can run without a PATH. Certainly not test programs - meson
adds bld subdirs to the PATH to make sure that test programs
use uninstalled glib at runtime.
So make sure that PATH is passed along.
Windows \r\n EOLs strike again. The test already knows about LINEEND,
so make it use LINEEND more (instead of swithcing pipes
to binary mode). This also applies to counting the bytes
read.
With winsock sending messages to NULL results in G_IO_ERROR_NOT_CONNECTED
instead of G_IO_ERROR_FAILED.
MSDN says:
WSAENOTCONN
10057
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected
and (when sending on a datagram socket using sendto) no address was supplied.
So this is a direct mapping of the implementation error.
Covering it up in the wrapper (by converting it to G_IO_ERROR_FAILED)
doesn't seem feasible or needed (no one, except for the testsuite,
really cares which unrecoverable error is returned by sendto()).
getaddrinfo() in winsock can't understand scope IDs.
There's no obvious way to fix that, short of re-implementing
that function, so disable that part of the test on Windows.
G_RESOURCE_OVERLAYS is a list of resource-path and filesystem-path pairs.
Since on Windows filesystem paths use ':', this list can't be ':'-separated
there. Fix that by making it ';'-separated on Windows. Make the parser
error clearer (we're not looking for a slash, we're looking for an absolute
path).
If a URI can't be handled by by WinHTTPVfs, it should pass that URI
along to the URI parser of the wrapped Vfs, not to its generic parser.
Theoretically, generic parser should also be able to handle URIs,
but this is subject to Vfs semantics.
In case of Windows, the wrapped Vfs is GLocalVfs, which is *local* and
treats any generic names as either file:// URIs or as filesystem
paths. It only ever treats URIs as URIs when they are passed
to its URI parser. This breaks the testsuite when g-icon GIO test passes
unhandleable sftp:// URI, and expects it to come through unmolested,
yet GLocalVfs, getting that URI as a generic parse name, treats it as
a filesystem path, and then "canonicalizes" it by prepending CWD.
Fix this by making WinHTTPVfs pass any URIs it gets to the URI parser
of the wrapped Vfs. This way unknown URIs remain URI-ish. This seems
like a reasonable things to do, since the URI parser should not be
given anything other than URIs, so there's no reason to try generic
parsing with these strings.
Closes: #875
Previously once the end of addresses was reached it would return
NULL even if it was waiting on a dns response. Now it will keep
waiting so all addresses are received.
Fixes#1680
Currently, the actual asynchronous work, represented by
asynchronous_cancellation_run_task, was over before the GCancellable
could be triggered. While that doesn't invalidate the purpose of the
test, since it's fundamentally about cancellation, it would be
nicer if the cancellation actually served some purpose instead of
being a mere formality.
https://gitlab.gnome.org/GNOME/glib/issues/1608
When calling g_socket_listener_accept_socket_async() on a
GSocketListener with multiple sockets, the accept_ready() callback is
called for the first incoming connection on each socket. It will return
success/failure for the entire accept_socket_async() GTask, and then
free the GSources for listening for incoming connections on the other
sockets in the GSocketListener. The GSources are freed when the GTask is
finalised.
However, if incoming connections arrive for multiple sockets within the
same GMainContext iteration, accept_ready() will be called multiple
times, and will call g_task_return_*() multiple times, before the GTask
is finalised. Calling g_task_return_*() multiple times is not allowed.
Propagate the first success/failure, as before, but then ignore all
subsequent incoming connections until the GTask is finalised.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Once cancelled, a GTask's callback should not only be invoked
asynchronously with respect to the creation of the task, but also with
respect to the GCancellable::cancelled handler. This is particularly
relevant in cases where the cancellation happened in the same thread
where the task is running.
Spotted by Dan Winship and Michael Catanzaro.
Closes https://gitlab.gnome.org/GNOME/glib/issues/1608
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1679.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
To make things consistent across the board as that is the WinSock2 error
code that is received by g_socket_send_message_with_timeout() when it
returns G_POLLABLE_RETURN_WOULD_BLOCK.
This never caused any problems because the default GSettingsBackend is
cached forever by GIOModule anyway.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
I was trying to debug some memory leaks in the gsettings test.
Eventually, it seems that actually they’re caused by the
GMemorySettingsBackend being cached by GIOModule — so this commit makes
no functional changes. It should make the code and documentation a bit
clearer though.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This mostly affects the 2.56 branch, but, given that GCC 9 is being
stricter about passing null string pointers to printf-like functions, it
might make sense to proactively fix such calls.
gdbusauth.c: In function '_g_dbus_auth_run_server':
gdbusauth.c:1302:11: error: '%s' directive argument is null
[-Werror=format-overflow=]
1302 | debug_print ("SERVER: WaitingForBegin, read '%s'",
line);
|
gdbusmessage.c: In function ‘g_dbus_message_to_blob’:
gdbusmessage.c:2730:30: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
2730 | tupled_signature_str = g_strdup_printf ("(%s)", signature_str);
|
The recent changes of the g_app_info_launch_default_for_uri_async()
function ensures that the callback is not called before DBus-activated
applications start. Let's use g_app_info_launch_default_for_uri_async()
and remove the workarounds for DBus-activated applications.
Closes: https://gitlab.gnome.org/GNOME/glib/issues/1249
The g_app_info_launch_uris_async() and g_app_info_launch_uris_finish()
functions are crucial to fix g_app_info_launch_default_for_uri_async()
to be really asynchronous.
This patch also adds GDesktopAppInfo implementation of that vfuncs.
The implementation may still use some synchronous calls to local MIME DB.
https://gitlab.gnome.org/GNOME/glib/issues/1347https://gitlab.gnome.org/GNOME/glib/issues/1249
In the writev() tests, the handling of cancellation is tested. However,
the GCancellable was cancelled after the writev_async() call was
started. Depending on the implementation of the writev() vfunc, the
operation could be done in a thread or in callbacks on the current
thread’s main loop. If done in a separate thread, there’s a chance that
enough of the write could happen before cancellation reaches that thread
that the overall operation returns success with a short write.
That would cause the test to fail, sometimes.
Avoid that by cancelling the GCancellable before starting the writev()
operation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Reviewed-by: nobody
It would always be initialized but initialize it to NULL to silence the
compiler, and also check that it is not NULL anymore when we expect it
to contain a valid value.
../gio/tests/desktop-app-info.c: In function ‘test_fallback’:
../gio/tests/desktop-app-info.c:191:18: warning: ‘app’ may be used uninitialized in this function [-Wmaybe-uninitialized]
g_assert_true (g_app_info_equal (info1, app));
^~~~~~~~~~~~~~~~
It could've never been uninitialized in this code but the code flow is
not obvious to the compiler. Initialize it to NULL and for clarity also
add an assertion that it is not NULL anymore on usage.
In file included from ../glib/glib.h:62,
from ../gobject/gbinding.h:28,
from ../glib/glib-object.h:23,
from ../gio/gioenums.h:28,
from ../gio/giotypes.h:28,
from ../gio/giomodule.h:28,
from ../gio/giomodule.c:25:
../gio/giomodule.c: In function ‘_g_io_module_get_default’:
../glib/gmessages.h:343:25: warning: ‘extension’ may be used uninitialized in this function [-Wmaybe-uninitialized]
#define g_debug(...) g_log (G_LOG_DOMAIN, \
^~~~~
../gio/giomodule.c:912:17: note: ‘extension’ was declared here
GIOExtension *extension, *preferred;
^~~~~~~~~
This allows returning WOULD_BLOCK without allocating a GError, and
should later be used for various functions of GPollableOutputStream,
GPollableInputStream and anything else that can potentially block.
Interpret the value "help" for environment variables that
are passed to _g_io_module_get_default(), and print the
names and priorities of available extensions.
This lets users explore what is available, and can be helpful
in figuring out why a certain extension was chosen as default.
It is similar in spirit to what we already do with environment
variables like G_DEBUG.
This is useful for debugging in many situations. It’ll be printed with
G_MESSAGES_DEBUG=GLib-GIO or G_MESSAGES_DEBUG=all.
Mostly I need it for debugging the default GNetworkMonitor, but it will
work for all GIO module implementations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
When we are in a sandboxed situation, bump the priority
of the keyfile settings backend above the dconf one,
so we use a keyfile inside the sandbox instead of requiring
holes in the sandbox for dconf.
Stacked databases and locks are dconf features that allow
management software like Fleet Commander to set system-wide
defaults and overrides centrally for applications.
This patch adds minimal support for the same to the keyfile
backend. We look for a keyfile named 'defaults' and a
lock-list named 'locks'.
Suitable files can be produced from a dconf database with
dconf dump and dconf list-locks, respectively.
The default location for these files is /etc/glib-2.0/settings/.
For test purposes, this can be overwritten with the
GSETTINGS_DEFAULTS_DIR environment variable.
Writes always go to the per-user keyfile.
Make it possible to instantiate a keyfile settings backend
without specifying parameters, by turning the arguments to
the new() function into construct-only properties. If no
filename is specified, default to
$XDG_CONFIG_HOME/glib-2.0/settings/keyfile
It needs investigating and fixing properly, but let’s not let it disrupt
the CI in the meantime.
Follow-up in https://gitlab.gnome.org/GNOME/glib/issues/1653.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
There's a race here, as revealed by Debian's buildds.
We call g_dbus_proxy_new() to create a proxy for the test server, with
callback proxy_ready() Then we call g_spawn_command_line_async() to
start the test server, and then start the main loop.
proxy_ready() assumes that the test server hasn't been started when it
is called. But there is no guarantee that these asynchronous operations
involving spawning a process won't happen in a different order that mean
the bus name *does* have an owner.
What we can do is move starting the server inside of proxy_ready(), so
we know that the test server isn't started until after the proxy is
created. We also add an assertion to check that it is indeed not running
before we execute it.
Rather than storing it as an invalid value in last_position, store it as
a separate boolean.
This introduces no functional changes, but should fix some warnings from
MSVC.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1500
If we can't find the mount point for target or tmp (as currently
happens on Launchpad autobuilders, and perhaps relatedly, on a
development system that uses btrfs), that's probably not great but is
not really the point of this test.
Signed-off-by: Simon McVittie <smcv@collabora.com>
In a minimal autobuilder environment, this test could conceivably be
the first thing to refer to ~/.local.
Modified by Iain Lane <laney@debian.org>: Don't try to create ~/.local
from tests, but skip if it doesn't exist.
Signed-off-by: Simon McVittie <smcv@collabora.com>
So long, and thanks for everything. We’re a Meson-only shop now.
glib-2-58 will remain the last stable GLib release series which is
buildable using autotools.
We continue to install autoconf macros for autotools-using projects
which depend on GLib; they are stable API.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Like for the OpenURI portal, O_PATH file descriptors do not prove access
to the underlying file data. I've used O_RDWR file descriptors here to
mirror the requested read/write permissions.
This change relates to https://github.com/flatpak/xdg-desktop-portal/issues/167
The OpenURI portal requires the caller to pass a file descriptor as
proof of access for local files. Old versions required this file
descriptor to use the O_PATH mode. However, this does not prove access
since you can create O_PATH descriptors for files that you can't read.
Since xdg-desktop-portal 1.0.1, regular file descriptors are also
accepted with O_PATH descriptors restricted to flatpaks for the
transition.
Check for over- and underflow when manipulating positions.
This makes the sequence
g_list_model_get_item (store, 0);
g_list_model_get_item (store, -1u);
return NULL for the second call, as it should.
Closes: #1639
Calling
g_list_model_get_item (store, 0);
g_list_model_get_item (store, -1u);
does not return NULL for the second call, as it should.
This was showing up in GTK+ list model tests.
Since commit 290bb0dd, where various members of GTask were converted to
a bitfield, some of the getters:
• g_task_get_check_cancellable()
• g_task_get_return_on_cancel()
• g_task_get_completed()
have been returning truthy ints (zero or an arbitrary non-zero integer)
as boolean values, rather than the canonical boolean ints of 1 and 0.
This broke the `yield` statement in Vala, whose generated C code
compares `g_task_get_completed (…) != TRUE`. i.e. Whether the
`completed` field has a value not equal to 1.
Fix this by explicitly converting truthy ints to canonical boolean ints
in all getters.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1636
Names are a message bus feature, so it does not make sense to connect
to NameOwnerChanged when the underlying connection is not a message
bus.
Moreover, g_dbus_connection_signal_subscribe() will also enforce that
condition. Adding this extra check here is helpful to avoid a critical
warning when using GDBusProxy with peer-to-peer connections.
https://gitlab.gnome.org/GNOME/glib/issues/1620
Right now this can only be set at construction but not read back.
That seems unnecessarily restrictive, and we'll need to read these
flags from outside of gdbusconnection.c in the next commit, so let's
just make it public.
https://gitlab.gnome.org/GNOME/glib/issues/1620
Add option to not encode resource data into the C source file
in order to embed the data using `ld -b binary`. This improves compilation
times, but can only be done on Linux or other platforms with a
supporting linker.
(Rebased by Philip Withnall, fixing minor rebase conflicts.)
Fixes#1489
This reverts commit 52bab0254a.
It silently conflicted with another commit,
90ca3b4dd0, which was merged later than
it. I’ve kept commit 90ca3b because it also frees the GError; 52bab
doesn’t.
This is my failure to rebase and test old branches before merging them,
instead of assuming that the lack of automatically detected merge
conflicts actually means there are no merge conflicts.
Allow any type of private key in PEM files by treating PEM guards ending
with "PRIVATE KEY-----" as a private key instead of looking for a
pre-defined set of PEM guards. This enables the possibility for custom
GTlsBackend to add support for new key types.
Test cases have been expanded to ensure PEM parsing works for private
key when either header or footer is missing.
Encrypted PKCS#8 is still rejected. Test case has been added for this to
ensure behaviour is the same before and after this change.
The `apps` subprocess is spawned by desktop-app-info to interpret the
forest of .desktop files, and its output is provided on stdout. If debug
output is mixed up with that output, tests which parse the output fail.
Disable the debug output from the subprocess to prevent this.
The new debug output appeared as a result of recent changes to the
desktop file dir monitoring code in gdesktopappinfo.c.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The appinfo-test.desktop file is set up with an Exec= path which points
to the compiled and installed appinfo-test utility. When running the
tests uninstalled, however, this might not be present, which causes
loading appinfo-test.desktop to fail.
Split appinfo-test.desktop in two: keep the existing
appinfo-test.desktop for tests which need to launch appinfo-test, and
add a new appinfo-test-static.desktop for tests which don’t launch
anything (and, for example, just inspect GAppInfo properties).
appinfo-test-static.desktop uses an Exec= line which should always be
present (`true`) so it should never fail to load.
Allow the tests using appinfo-test-static.desktop to be run uninstalled
or installed. Allow the tests using appinfo-test.desktop to be skipped
if loading appinfo-test.desktop fails, which is an indicator that the
test is running uninstalled.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This causes the desktop directory cache to be correctly reloaded between
unit tests if G_TEST_OPTION_ISOLATE_DIRS is in use.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This allows the list of directories which contain MIME data to be set,
separately from the list of directories returned by
g_get_user_data_home() and g_get_system_data_dirs().
While the latter are overridden for a unit test, we don’t have access to
the system MIME registry, which can sometimes be useful for tests which
need to know about standard MIME associations from shared-mime-info.
Allow g_content_type_set_mime_dirs() to be used from unit tests to allow
them to use the system MIME registry again, or to allow them to be
pointed to another custom registry.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
In order to make xdgmime properly relocatable so that unit tests can use
it without it reading and modifying the user’s actual xdgmime files, and
without the need to call setenv() (and get tied up with thread safety
problems), add a xdg_mime_set_dirs() method to allow the dirs to be
overridden. They will still default to the values of $XDG_DATA_HOME and
$XDG_DATA_DIRS.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() is for runtime code, and can be compiled out. g_assert_*()
cannot be compiled out, and give more helpful failure messages for
specific types.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
g_assert() can be compiled out with G_DISABLE_ASSERT, which renders the
test useless. The g_assert_*() functions provide more helpful feedback
on failure too.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
By encoding the path to the appinfo-test binary in the .desktop files,
we can avoid a chdir() call in the tests, which was a bit ugly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/538
This partially reverts commit 27b5fb5892.
The infrastructure for disabling a test is kept, but the appinfo and
desktop-app-info tests no longer need to be run serially.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1601
gtk-doc is unhappy that skeleton documentation comments had been written
for these functions (for the introspection annotations) but that the
documentation content was actually missing.
Add that content. I like a happy gtk-doc.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This partially reverts commit 799f8dcd46.
This patch seems to break the writability status of the server socket: once
somebody writes to it with success, then it reports it is not writable
anymore. Also, when the client socket has the flag FD_CONNECT set once,
it is never cleared and then it reports it is always writable, also when
it is not.
This checks if the stream is writable before writing
to it. If the write succeeded with no error, then the
stream has to be also writable after the write
Currently a new connection will not be attempted until the previous
one has timed out and as the current API only exposes a single
timeout value in practice it often means that it will wait 30 seconds
(or forever with 0 (the default)) on each connection.
This is unacceptable so we are now trying to follow the behavior
RFC 8305 recommends by making multiple connection attempts if
the connection takes longer than 250ms. The first connection
to make it to completion then wins.
As RFC 8305 recommends we can start multiple DNS queries in parallel
to more quickly make an initial response, especially when one is
particularly slow/broken.
This allows higher levels to have more control over resolving
(ipv4 or ipv6 for now) which allows for optimizations such
as requesting both in parallel as RFC 8305 recommends.
This means the output (including lists of filenames) does not depend on
the order of the input files, which may matter if this tool is invoked
with a glob or some other mechanism that doesn't guarantee an order.
Turns out the fix in commit 93555577c wasn't enough, when using glib as
subproject and the parent project uses only libgio_dep, and include
<gi18n.h>, it won't find libintl.h because it's in the
include_directories of libglib_dep. Fix that by declaring dependencies
explicitly, which is the right thing to do since glib and gobject are
public dependencies of gio. That reflects what we do for the pkg-config
file as well.
Previously, method and signal arguments were sorted by name, which
(assuming you don't happen to give your arguments
lexicographically-ordered names) means the generated signatures were
incorrect when there is more than 1 argument.
While sorting the methods and signals themselves (and properties, and
annotations on all these) is fine, it's easiest to not sort anything.
Since 1217b1bc4f, LICENSE_STR has taken two
parameters, not one. Without this change, running either mode fails
with a traceback like:
Traceback (most recent call last):
File "../gdbus-codegen", line 55, in <module>
sys.exit(codegen_main.codegen_main())
File ".../codegen_main.py", line 294, in codegen_main
gen.generate()
File ".../codegen.py", line 896, in generate
self.generate_body_preamble()
File ".../codegen.py", line 682, in generate_body_preamble
self.outfile.write(LICENSE_STR.format(config.VERSION))
IndexError: tuple index out of range
8916874ee6, which introduced these flags,
was actually merged after that commit, but I assume it was written
beforehand.
This is to ensure that the generated code is still compilable by the
running compiler, and see whether we can read the things in there
properly.
See issue #1580.
glib-compile-resources was updated to generate octal byte
representation in a string, but unfortunately this breaks the build
on Visual Studio when the generated string sequence exceeds 65535
characters, which is the imposed limit on Visual Studio compilers.
To make things work on Visual Studio builds and to not slow down things
on other compilers, generate a code path for Visual Studio an array of
octal byte representations, as well as a code path for other compilers
that use the new string representation of octal values, and let the
compiler take the appropriate code path when compiling the
generated code.
Fixes issue #1580.
While uniqueness is great, sometimes you want to restart
a newer version of the same app. These two flags make that
possible.
We also add a ::name-lost signal, that is emitted when it
happens. The default handler for this signal just calls
g_application_quit(), but applications may want to connect
and do cleanup or state-saving here.
When using glib as subproject we are forced to pass glib_dep,
gobject_dep and gio_dep to any build target. If we pass only gio_dep it
will missing include directory for glib and gobject.
Putting the raw URIs in the documentation comments would not link them,
and the ‘%20’s in the URIs were being parsed by gtk-doc as symbol
references. Fix that by using Markdown to format them correctly as
links.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Using `%` indicates that you’re linking to a symbol. In these cases we
wanted some nicely formatted literals, or a link to a specific property.
Use backticks for the literals, and link to the property fully.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Due to the line wrapping, gtk-doc was interpreting this second line as
redefining the @dbus_register documentation.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Otherwise they fill your real ~/.config/mimeapps.list with rubbish and
race for access to it. This is arguably not good.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/glib/issues/1514
If a D-Bus interface was annotated with o.fd.DBus.Deprecated, then the
corresponding GObject property, in the common GInterface implemented
by the generated GDBusObjectProxies and GDBusObjectSkeletons, to
access the generated code for the D-Bus interface was not being marked
with G_PARAM_DEPRECATED, even though the gtk-doc snippet had the
'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
If a D-Bus interface has a property that's annotated with
o.fd.DBus.Deprecated, then the corresponding GObject property was not
being marked with G_PARAM_DEPRECATED, even though the gtk-doc snippet
had the 'Deprecated: ' tag.
G_PARAM_DEPRECATED is older than gdbus-codegen, 2.26 and 2.30
respectively, hence it can be used unconditionally.
https://gitlab.gnome.org/GNOME/glib/merge_requests/485
Allowing unsafe rehandshakes used to be required for web compatibility,
but this is no longer a concern in 2018. So there should no longer be
compatibility benefits to calling this function. All it does is make
your TLS connection insecure.
Also, rehandshaking no longer exists at all in TLS 1.3.
At some point (maybe soon!) glib-networking will begin ignoring the
rehandshake mode, so let's deprecate it now.
Let's entirely deprecate calling this function for rehandshaking. The
current documentation is OK, but guarantees defined behavior (to attempt
a rehandshake) when TLS 1.2 is in use. But there's no way to force TLS
1.2, and also no way to check which version of TLS is in use. I really
should have deprecated use of this function for rehandshaking entirely
last time I updated it.
Fortunately, there should be no compatibility risk for existing code,
because rehandshaking has no visible effects at the API level.
With the changes to limit GVariant type nesting (commit 7c4e6e9fbe),
it’s now possible to have a valid type signature which is not a valid
GVariant type when enclosed in parentheses (to make it a tuple).
Check for that when parsing the signature field in a D-Bus message.
Includes a unit test.
oss-fuzz#11120
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This test is intended to verify the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=787731, which was that
g_file_query_filesystem_info() would return stale information for the
mount. After replacing a read-only mount with a read-write mount, this
test used to only fail if G_FILE_ATTRIBUTE_FILESYSTEM_READONLY was TRUE
and yet the file could be opened for writing. In particular, if (due to
a test bug) the file really was still on a read-only filesystem, the
test would pass.
Now that we have fixed that bug in the test, we can make a stronger
assertion.
fusermount -z behaves like umount --lazy, which is documented thus:
> Detach the filesystem from the file hierarchy now, and clean up all
> references to this filesystem as soon as it is not busy anymore.
Without this, the call to `fusermount -u` often fails with:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent call to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
It's not clear what is causing the mount to be busy. Inserting a
g_usleep (100 * 1000) before the calls to `fusermount -u` also works to
make the problem go away, but for the purposes of this test the
important point is that the mount is detached from the directory, for
which a lazy unmount is fine.
Fixes#1590.
In practice, fusermount -u often fails:
/usr/bin/fusermount: failed to unmount /home/wjt/src/gnome/glib/_build/dir_bindfs_mountpoint: Device or resource busy
which causes the subsequent calls to bindfs to fail:
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
This may or may not cause the current test run to fail, but it reliably
causes a repeat run of the test to fail. This change causes the current
run to fail instead.
I made a mistake when last updating the documentation in 94a99ae9. I
wrote that, with TLS 1.3, this would perform a rekey instead of a
rehandshake. In fact, that's only true for client connections. For
server connections, it's a no-op.
I was a bit nervous about how to document the behavior anyway, because
we really don't know what behavior will be reasonable with non-GnuTLS
crypto backends. This behavior is reasonable for the GnuTLS backend, but
might not necessarily make sense for OpenSSL. Ideally, we would
discourage API users from doing things which could have unexpected
effects, so instead of documenting what the GnuTLS backend does, I think
it'd be better to document that this is "undefined but not dangerous,"
since of course we want to make sure that existing code that doesn't
know about TLS 1.3 is not broken.
The docs sound like settings list is a thing, and
a ::children-changed signal exists. That is not the
case, and will never be the case at this point, so
stop pretending.
Closes: #1362
Currently, GDBusProxy:g-name-owner only notifies changes to the unique
name owner of the remote object in case the proxy was constructed for a
well-known name.
That sounds like an artificial restriction, and it's convenient to
connect to notify::g-name-owner if a proxy instance has already been
created for an unique name, instead of additionally using
g_bus_watch_name() to track the owner.
To fix this, always connect to NameOwnerChanged after the proxy is
initialized, instead of only doing so when the proxy was constructed for
a well-known name.
https://bugzilla.gnome.org/show_bug.cgi?id=791316https://gitlab.gnome.org/GNOME/glib/issues/1310
test_c_args is defined in the root meson.build with unfiltered list of
compiler flags, then redefined in gio/tests/meson.build after the
subdir() call. Move it before.
The length of the stolen data from a memory output stream is given by
get_data_size() — get_size() can be larger, and hence cause unnecessary
overallocation.
Similarly to g_source_set_name(), this sets a name on a GTask for
debugging and profiling. Importantly, this name is propagated to the
GSource for idle callbacks for the GTask, ending the glorious reign of
`[gio] complete_in_idle_cb`.
The name can be queried using g_task_get_name(). Locking is avoided by
only allowing the name to be set before the GTask is used from another
thread.
Includes tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This is the most degenerate possible test but it does exercise this code
path.
(Tweaked by Philip Withnall <withnall@endlessm.com> to also add the flag
to the autotools build.)
The executable depends only on the generated header file at compile
time, and on the library at link time. So meson can decide to compile
gdbus-peer.c before compiling the library and thus won't have generated
the header yet, causing the build error.
So declare_dependency() should only have the header file in its sources,
to force generating files before compiling gdbus-peer.c without
including objectmanager-gen.c into gdbus-peer's sources.
We use libgdbus_example_objectmanager_dep as dependency for various
tests, but this implies only a link dependency while it doesn't ensure
that the sources are generated.
Make this explicit
mntent-based implementation filter out mounts with device path that was
repeated. Consequently, it is not possible to show such mounts in UI even
with x-gvfs-show, because they are not returned from g_unix_mounts_get.
libmount-based implementation currently doesn't filter out any mounts
which causes issues to our volume monitors. Let's rather mark mounts
which don't point into fs root as system_internal. This approach won't be
affected by mount order as is mntent-based implementation. It will mark
more mounts as system_internal than it is filtered out with mntend-based
implementation, but there will be always possibility to show them in UI
over x-gvfs-show, which was not possible with mntend-based. We can
probably introduce some improvements later to not mark unique mounts as
system internal even if they don't point into fs root...
https://gitlab.gnome.org/GNOME/glib/issues/1271
Currently, there isn't API to determine root path for mounts created
over bind operation (or btrfs subvolumes). This causes issues to our
volume monitors if there is multiple mounts for one device, which can
happen with libmount-based implementation currently. Let's propagate
root path from libmount over g_unix_mount_get_root_path, so we can
handle this somehow in our volume monitors.
https://gitlab.gnome.org/GNOME/glib/issues/1271
Currently, readlink() is used only 12 times when expanding symlinks.
However, kernel uses 40 for this purpose and it is defined as MAXSYMLINKS.
Use that constant if available, or 40. See:
https://github.com/torvalds/linux/include/linux/namei.h.
find_mountpoint_for() uses current file in case of error, because
get_parent() returns NULL for error, but also if parent doesn't exist.
Return "." from get_parent() if parent doesn't exist in order to
differentiate the error state.
Test symlink expansion in find_mountpoint_for() function over
_g_local_file_find_topdir_for(). find_mount_for() is crucial for many
of glocalfile.c functionality (e.g. to determine correct trash location)
and symlink expansion has to work properly.
https://gitlab.gnome.org/GNOME/glib/issues/1522
These were callers which explicitly specified the string length to
g_utf8_validate(), when it couldn’t be negative, and hence should be
able to unconditionally benefit from the increased string handling
length.
At least one call site would have previously silently changed behaviour
if called with strings longer than G_MAXSSIZE in length.
Another call site was passing strlen(string) to g_utf8_validate(), which
seems pointless: just pass -1 instead, and let g_utf8_validate()
calculate the string length. Its behaviour on embedded nul bytes
wouldn’t change, as strlen() stops at the first one.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
This introduces no real functional changes (except when compiling with
G_DISABLE_ASSERT, in which case it fixes the test). Mostly just a code
cleanup.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
The code was checking whether the signature provided by the blob was a
valid D-Bus signature — but that’s a superset of a valid GVariant type
string, since a D-Bus signature is zero or more complete types. A
GVariant type string is exactly one complete type.
This meant that a D-Bus message with a header field containing a variant
with an empty type signature (for example) could cause a critical
warning in the code parsing it.
Fix that by checking whether the string is a valid type string too.
Unit test included.
oss-fuzz#9810
Signed-off-by: Philip Withnall <withnall@endlessm.com>
